Convert Celsius temperatures to Kelvin temperatures.

When we use the Gas Law equations, you must have the temperature in Kelvins.

1. 104oC = ?K

2. 35 oC = ?K

3. -47 oC = ?K

4. 499 oC = ?K

Acetals and ketals can be obtained through a reaction between aldehydes or ketones, respectively, with alcohols in the presence of an acid catalyst. The acid catalyst helps to protonate the carbonyl group of the aldehyde or ketone, making it more reactive towards nucleophilic attack by the alcohol.

This reaction results in the formation of a hemiacetal or hemiketal intermediate, which can then undergo a second reaction with another molecule of alcohol to form the acetal or ketal, respectively. The acid catalyst is then used to remove the water molecule that is produced during this second reaction, driving the equilibrium towards the formation of the acetal or ketal product.To obtain an acetal or ketal, you need to perform an acetal formation reaction, which involves the nucleophilic addition of an alcohol to a carbonyl compound (aldehyde or ketone) in the presence of an acid catalyst. In the case of acetals, the carbonyl compound is an aldehyde, and for ketals, it is a ketone. This reaction proceeds through a hemiacetal intermediate and ultimately results in an acetal or ketal product.

learn more about Acetals here

https://brainly.com/question/17179890

#SPJ11

The ban of chlorofluorocarbons was targeted at companies that use, export, or import the gas, not those that produce it. This ban was put in place to protect the ozone layer from further depletion caused by the use of chlorofluorocarbons. The correct answer is b. produce the gas.

CFCs are chemicals that can damage the ozone layer and are used in items like aerosols and refrigerators. "CFC" is an acronym for "chlorofluorocarbon."

The use of CFC is restricted in many nations because it breaks down into chlorine atoms, which weakens or destroys the ozone layer.

The ozone layer's thinning permits harmful UV radiation to penetrate the atmosphere, which can result in skin cancer, genetic diseases, sunburn, and other adverse effects on marine and forest life. Hence, The correct answer is b. produce the gas.

To know more about chlorofluorocarbons click here:

https://brainly.com/question/16159504

#SPJ11

We can produce 240.74 g of Magnesium sulfate from the reaction of 2 moles of Magnesium oxide with Sulfuric acid.

As a result, we can see that we may obtain moles of our initial reactant by dividing its original mass in grammes by its molar mass. To obtain moles of product, multiply those grammes by the products-to-reactants ratio, which is 2:4. Lastly, we multiply the product's moles by its molar mass to obtain its grammes.

Magnesium oxide + Sulfuric acid → Magnesium sulfate + Water

The molar mass of Magnesium sulfate is:

Magnesium sulfate = 24.31 + 32.06 + (4 x 16.00) = 120.37 g/mol

So, 2 moles of Magnesium sulfate would have a mass of:

mass = 2 moles x 120.37 g/mol = 240.74 g

To know more about reaction visit:-

https://brainly.com/question/28984750

#SPJ1

Enzyme-coagulated curd and acid-coagulated curd have different textures due to the differences in the coagulation process and resulting protein structures.

Enzyme-coagulated curd has a different texture than acid-coagulated curd due to the different coagulation processes involved.

1. Enzyme-coagulated curd is formed by using enzymes, such as rennet, which specifically target and break down casein proteins in milk. This leads to the formation of a more firm and elastic curd, as the proteins bind together tightly, trapping water and fat molecules.
2. Acid-coagulated curd is formed by adding an acid, like vinegar or lemon juice, to milk. This lowers the pH and causes the proteins to denature and clump together, forming a curd. The acid-coagulated curd is generally softer and more fragile than enzyme-coagulated curd, as the protein bonds are less structured.

The different coagulation methods result in distinct textures, with enzyme-coagulated curds being firmer and more elastic, while acid-coagulated curds are softer and more crumbly.

To know more about coagulation ,

https://brainly.com/question/30514392

#SPJ11

The element that's most likely to produce a 2+ electron calcium is the correct answer.

Calcium sources include milk, cheese, and other dairy products. Green leafy vegetables, such as curly kale and okra, but not spinach (although spinach contains a lot of calcium, the body can't digest it all). Soya drinks with calcium.

A typical adult requires 1,000 mg of minerals per day. For women across the age in 50 or men over the power source age of 71, the amount raises to a total of 1,200 milligrams per day. "It's best to get your calcium from the food you eat, which is very doable because calcium is a substance found in a variety of foods, asserts Dr. Brown.

To know more about calcium visit :

https://brainly.com/question/8768657

#SPJ1

The stock system name for Cu+ is Copper(I) ion.

In the stock system, the oxidation state or the charge of the metal ion is indicated in Roman numerals in parentheses after the name of the metal. In the case of Copper, the common oxidation states are +1 and +2. When Copper has a +1 charge, it is named a Copper(I) ion, while when it has a +2 charge, it is named a Copper(II) ion.

The stock system is important in identifying the charges and the number of atoms of elements present in a compound. It is commonly used in chemistry and is widely recognized as an essential tool in naming and identifying various compounds.

Learn more about the stock system at https://brainly.com/question/28271409

#SPJ11

The geometry of the hexafluoroaluminate ion[tex]AIF_{6} ^{-3}[/tex]is octahedral, as it has six fluorine atoms surrounding the central aluminum atom, arranged at the corners of an octahedron. This gives the ion a symmetry of OH.

Hexafluoroaluminate(3-) is an aluminum coordination entity and a perfluorometallate anion. To determine the geometry of hexafluoroaluminate.We first need to identify the number of bonding and non-bonding electrons in the molecule. Aluminum has three valence electrons, and each fluorine has seven valence electrons. The negative charge of the ion indicates that there are three extra electrons in the molecule. So, the total number of valence electrons in the hexafluoroaluminate ion is:48 .To find the molecular geometry, we can use the Valence Shell Electron Pair Repulsion (VSEPR) theory, which states that the molecular geometry is determined by the electron pairs (bonding and non-bonding) surrounding the central atom. In this case, the central atom is aluminum, with six fluorine atoms bonded. So, the electron pair geometry is octahedral, which means that the six fluorine atoms are arranged around the aluminum atom symmetrically, with the maximum distance from each other. However, since there are three extra electrons, the ion has three lone pairs of electrons on the aluminum atom. These lone pairs will repel the bonding pairs, causing them to compress slightly and leading to a distortion in the molecular geometry. Therefore, the geometry of the hexafluoroaluminate ion is distorted octahedral.

Learn more about Aluminum here:https://brainly.com/question/25869623

#SPJ11

The location of an enzyme's production or the location of the production of its inactive precursors might serve as a classification for the enzyme.

Enzymes can be classified based on the site where they are produced or where their inactive precursors are produced. For example, digestive enzymes such as amylase, lipase, and protease are produced in the pancreas and released into the small intestine to aid in the digestion of carbohydrates, fats, and proteins. Enzymes involved in blood clotting, such as thrombin and fibrinogen, are produced in the liver. Enzymes involved in the breakdown of glycogen into glucose, such as glycogen phosphorylase, are produced in the muscles and liver. Enzymes involved in the synthesis of proteins, such as RNA polymerase, are produced in the nucleus of the cell. Enzymes involved in the breakdown of amino acids, such as alanine transaminase and aspartate transaminase, are produced in the liver. Overall, the site of enzyme production can provide insight into the function and regulation of the enzyme.

To know more about  enzyme's click here:

https://brainly.com/question/31385011

#SPJ11

The most practical method for removing nitrates from water is ion exchange.

In this method, water containing nitrates is passed through a resin bed that contains exchangeable ions, usually sulfonated polystyrene beads. The nitrate ions are exchanged with other ions on the resin, typically chloride or sulfate ions. The nitrate-free water is then collected from the outlet of the resin bed.

Reverse osmosis is also an effective method for removing nitrates from water, but it is typically more expensive and energy-intensive than ion exchange. Lime softening and double reverse osmosis are not commonly used methods for nitrate removal.

To know more about ion exchange, please click on:

https://brainly.com/question/28203551

#SPJ11

A liquid has a specific volume but still no distinct shape, a solid has a definite shape and size, and a gas lacks both. The volume of a solid is measured in cubic units like cubic centimetres, metres, and feet.

The surface area of an object is the space and region that it takes up. On the reverse hand, volume describes how much space an object has. Geometry includes a wide variety of shapes and proportions, such as spheres, cubes, cuboid shapes, cones, and cylinders. Each form has a unique surface area and volume.

The amount of space a liquid takes up inside the container determines its volume. The values in the measuring containers therefore precisely reflect the liquid's volume. The litre (l) unit of measurement is used to express liquid volume. a 20-liter milk can, a 1-liter dairy packet, and so forth.

To know more about gas visit:

https://brainly.com/question/14812509

#SPJ1

Swimming pool clarity is measured in NTU or Nephelometric Turbidity Units. Water purity level in swimming pools should not exceed 0.5 NTU. So option (b) is true.

Turbidity is defined as the opacity of the liquid due to suspended solids and is measured in nephelometric turbidity units (NTU). The National Sanitation Foundation's standard for water purity is 0.5 Nephelometric Turbidity Units (NTU). During peak bath load, turbidity is allowed to rise to 1.0 NTU, but must return to 0.5 NTU within 6 hours (NSPF 2005).

Reducing the turbidity of the water is important for killing the well. As we can see, the clarity of the water in swimming pool is between 0.5 NTU and 1 NTU, so it is not the highest. Thus, the water clarity level shall not exceed than 0.5 NTU. So, option(b) is answer.

For more information about Nephelotnetric Turbidity Units, visit :

https://brainly.com/question/31556949

#SPJ4

The Langelier index is used to determine the point of stability of water pH.

This index is a measure of the balance between the saturation and corrosiveness of water, based on factors such as pH, alkalinity, calcium hardness, and temperature. The Langelier index can be used to predict whether water is likely to cause scaling or corrosion in pipes and other water systems. A Langelier index value below zero indicates that the water is corrosive, while a value above zero indicates that the water is likely to cause scaling. Therefore, the Langelier index is an important tool for ensuring the proper treatment and maintenance of water systems.

To know more about pH click here:

https://brainly.com/question/2288405

#SPJ11

According to the passage the inhibitive behavior on PBP, is cephalosporins bind irreversibly to the active site of PBP.

Generally cefixime is the substance which is used to treat certain infections that is caused by some bacteria such as bronchitis ( this causes infection in the airway tubes leading to the lungs), gonorrhea (which is a sex-ually transmitted disease) and certain infections of the ears, throat, tonsils, and also urinary tract. Basically cefixime is in a class of medications which are known as cephalosporin antibiotics.

Generally sui-cide inhibition occurs when an enzyme binds to the inhibitor ( which is structurally a substrate analogue) and this binding usually forms a irreversible complex by the formation of covalent bond.

Learn more about cefixime from the link given below.

https://brainly.com/question/28232269

#SPJ4

Statement i is true about batteries. For a battery to be able to supply electrical energy to a circuit, the overall reaction that occurs within the battery must have a positive emf.

i. The overall reaction in a battery must have a positive emf is true. The emf, or electromotive force, is the measure of the energy per unit charge that is supplied by a source of electrical energy, such as a battery.
ii. Batteries must have some sort of salt bridge to allow for ion transport is partially true. A salt bridge is a component of some types of batteries that allows for the transport of ions between the two half-cells of the battery. However, not all batteries require a salt bridge. For example, some types of batteries, such as the alkaline battery, use a porous separator instead of a salt bridge to allow for ion transport  electrical energy .
iii. Lithium-ion batteries provide higher voltages than most other batteries is partially true. Lithium-ion batteries are known for their high energy density and long cycle life, but their voltage is not necessarily higher than other types of batteries. The voltage of a battery depends on the chemistry of the reaction that occurs within the battery, and different types of batteries can have different voltages.

Learn more about  electrical energy  here

https://brainly.com/question/863273

#SPJ11

The 25.0L tank contains 3.34 moles of helium gas at 3.2 atm pressure and 25.0°C temperature.

A material (such as an atom, a molecule, or an ion) has a molecular mass of 6.022 1023 units. The term "Avogadro's number" or "Avogadro's constant" refers to the number 6.022 1023.

P = 3.2 atm

V = 25.0 L

n = ?

R = 0.0821 L·atm/(mol·K)

T = 25.0 + 273.15 = 298.15 K

Using the ideal gas law equation PV = nRT, we can solve for n:

n = PV/(RT) = (3.2 atm) * (25.0 L) / (0.0821 L·atm/(mol·K) * 298.15 K) = 3.34 mol.

To know more about moles visit:-

https://brainly.com/question/26416088

#SPJ1

The correct answer to the given question is an option (C).

For balancing the equation there must be an equal number of elements on both sides of the equation.

In the given question there are 1-S, 4-F, 2-H, and 1-O on the left side whereas,

on the right side there are 1-S, 1-F, 3-H, and 3-0.

To balance the equation add 1 and 3 coefficients to the left side(i.e. SF4 AND H20 respectively).

And, add 1 and 4 coefficients to the right side (i.e. H2SO3 and HF).

So, the equation becomes [tex]\sf{1SF_{4} + 3H_{2}O \longrightarrow 1H_{2}S0_{4} + 4HF}}[/tex]

Learn more about balancing equations on :

https://brainly.com/question/26694427

The current would need to be applied for approximately 0.71 hours (or 42.6 minutes) to plate out 4.90 g of nickel.

To determine how long the current must be applied to plate out a certain amount of nickel, we need to use Faraday's laws of electrolysis, which relate the amount of material deposited on an electrode during electrolysis to the amount of electric charge passed through the solution.

The first step is to calculate the amount of electric charge that would be passed through the solution during the plating of 4.90 g of nickel. We can do this using the following equation:

Q = nF

where Q is the amount of electric charge (in coulombs), n is the number of moles of nickel being plated out, and F is Faraday's constant (96485 coulombs per mole of electrons).

The number of moles of nickel being plated out can be calculated from its molar mass:

molar mass of nickel = 58.69 g/mol

moles of nickel = 4.90 g / 58.69 g/mol = 0.0834 mol

Substituting into the equation above, we get:

Q = 0.0834 mol × 96485 C/mol = 8040 C

The next step is to use the current to determine the time required to pass this amount of electric charge. We can use the following equation:

Q = It

where I is the current (in amperes), t is the time (in seconds), and Q is the amount of electric charge (in coulombs).

To convert hours to seconds, we multiply by 3600:

t = Q / I = 8040 C / 3.16 A = 2544 s = 2544/3600 hours

Therefore, by calculating we can say that the current would need to be applied for approximately 0.71 hours (or 42.6 minutes) to plate out 4.90 g of nickel.

To know more about the Faraday's laws refer here :

https://brainly.com/question/1640558#

#SPJ11

When 3.50 g of Mg(OH)2 is dissolved in 1.5 L of a 0.200 M KOH solution, the concentration of Mg2+ ions can be determined using the solubility product (Ksp) of Mg(OH)2, which is 1.2 x 10^-11.

First, calculate the concentration of OH- ions in the KOH solution:
OH- concentration = 0.200 mol/L

Next, write the solubility product expression for Mg(OH)2:
Ksp = [Mg2+][OH-]^2

Plug in the known values and solve for the Mg2+ concentration:
1.2 x 10^-11 = [Mg2+](0.200)^2,

Now, we can use the Ksp equation to solve for the concentration of Mg2+ ions:

Ksp = [Mg2+][OH-]^2
1.2 x 10^-11 = [Mg2+][0.200]^2
[Mg2+] = 1.2 x 10^-11 / 0.04
[Mg2+] = 3.0 x 10^-10 M
Therefore, the concentration of Mg2+ ions in the solution is 3.0 x 10^-10 M.

To know more about concentrations click here

brainly.com/question/29072206

#SPJ11

To find the concentration of Mg2+ ions, we first need to write the chemical equation for the dissolution of Mg(OH)2:
Mg(OH)2 (s) ⇌ Mg2+ (aq) + 2OH- (aq)

The solubility product expression for Mg(OH)2 is:
Ksp = [Mg2+][OH-]^2 = 1.2 x 10^-11

We know that 3.50 g of Mg(OH)2 are dissolved in 1.5 L of a 0.200 M solution of KOH.

To determine the concentration of Mg2+ ions, we need to use the stoichiometry of the balanced equation.

First, we need to calculate the number of moles of KOH present in 1.5 L of a 0.200 M solution:
n(KOH) = Molarity x Volume = 0.200 mol/L x 1.5 L = 0.300 mol

Since KOH is a strong base, it will dissociate completely in water to form OH- ions. Therefore, the concentration of OH- ions in the solution will be:
[OH-] = n(OH-) / V = 0.300 mol / 1.5 L = 0.200 M

Now we can use the solubility product expression to find the concentration of Mg2+ ions:

Ksp = [Mg2+][OH-]^2
[Mg2+] = Ksp / [OH-]^2 = (1.2 x 10^-11) / (0.200 M)^2 = 3.0 x 10^-10 M

Therefore, the concentration of Mg2+ ions in the solution is 3.0 x 10^-10 M.

To know more about stoichiometry of the balanced equation:

https://brainly.com/question/30808199

#SPJ11

Tactile finishes are generally applied to operating hardware in order to provide C. greater handling control.

These finishes offer an enhanced grip, making it easier to operate the hardware and improving the overall user experience. While they may have some effects on corrosion resistance or aesthetics, their primary purpose is to ensure better handling control.

Tactile finishes refer to textured or roughened surfaces that are designed to improve grip and prevent slippage. In the context of operating hardware, such as door handles, tactile finishes can make it easier for people to open and close doors, particularly in situations where their hands may be wet, greasy, or otherwise impeded. Tactile finishes can also be helpful for people with disabilities or limited mobility who may have difficulty grasping smooth or slippery surfaces. While some tactile finishes may also offer improved corrosion resistance or a more decorative appearance, their primary purpose is to provide greater handling control.

To learn more about corrosion, refer:-

https://brainly.com/question/31313074

#SPJ11

The answer is a. True. A radioisotope is an artificially created or naturally occurring isotope of a chemical element that is radioactive.

A radioisotope is a type of isotope, or variant, of a chemical element that is unstable and emits radiation as it decays into a more stable form. Isotopes of an element have the same number of protons in their nucleus but differ in the number of neutrons. Radioisotopes have an excess of neutrons or protons, making them unstable and causing them to emit radiation in the form of alpha, beta, or gamma particles. The rate at which a radioisotope decay is measured by its half-life, which is the time it takes for half of its atoms to decay.

Some chemical elements have no naturally occurring isotopes that are stable, so all of their isotopes are radioactive. Others, such as carbon and potassium, have both stable and radioactive isotopes. Radioisotopes are commonly used in various fields, including medicine, industry, and scientific research.

To know more about Radioisotopes:

https://brainly.com/question/9249979

#SPJ11

According to the question the number of moles of CO₂(g) produced in the reaction is 1.18 mol.

Moles are small, burrowing mammals found throughout much of the world. They are classified as insectivores, meaning they are specialized in eating insects. Moles have long, cylindrical bodies, short limbs, and large, clawed feet adapted for digging. Their fur is usually black to gray, though some species may have a light brown or yellowish color. They have small eyes and ears, and their noses are long and sensitive, used to detect prey and other objects in their environment.

The ideal gas law can be used to calculate the number of moles of CO₂(g) produced in the reaction. The ideal gas law states that PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is temperature.
Since the volume and temperature are known, we can rearrange the equation to solve for n:
n = PV/RT
At the beginning of the reaction, the pressure is 0 and the volume is 4.3 L, so the number of moles of CO₂(g) is 0.
At the end of the reaction, the pressure is 5 atm and the volume is still 4.3 L. Plugging these values into the equation gives us:
n = (5 atm)(4.3 L)/(0.08206 L·atm/mol·K)(298K) = 1.18 mol CO₂(g)
Therefore, the number of moles of CO₂(g) produced in the reaction is 1.18 mol.

To learn more about moles
https://brainly.com/question/15356425
#SPJ1

Solvents used as eluents should have suitable polarity, low volatility, low viscosity, compatibility with the stationary phase, and low toxicity and environmental impact. These characteristics contribute to efficient and effective chromatographic separation and sample recovery.

Typical characteristics of solvents used as eluents include:

1. Polarity: Eluent solvents should have an appropriate polarity to interact with the compounds being separated. The polarity of the solvent determines the separation efficiency and resolution of the chromatographic process.

2. Volatility: Eluent solvents should have low boiling points to allow for easy removal after the separation process. This ensures that the solvent can be evaporated without affecting the analytes, making the recovery process more efficient.

3. Low viscosity: Eluent solvents should have low viscosity to facilitate a smooth flow through the chromatographic column. Low viscosity reduces backpressure in the system, leading to faster separation times and better performance.

4. Compatibility: Eluent solvents should be compatible with the stationary phase and other components of the chromatographic system. Compatibility ensures that there is no degradation or damage to the stationary phase, and thus maintains the efficiency of the chromatographic process.

5. Low toxicity and environmental impact: Solvents used as eluents should have low toxicity and minimal environmental impact. This is important for both the safety of the personnel handling the solvents and the environment, as well as compliance with environmental regulations.

You can learn more about eluents at: brainly.com/question/28557521

#SPJ11

Molecular sieves are effective in removing water to shift the equilibrium in esterification reactions because they have a highly specific pore size that selectively adsorbs water molecules.

This allows them to effectively remove water without reacting with or affecting the other components in the reaction mixture. Other drying agents might not be suitable for this purpose because they can either react with the reactants, products, or catalysts involved in the esterification process, or they may not be selective enough in removing only water, thus potentially affecting the overall reaction equilibrium.

Molecular sieves are often preferred as drying agents in esterification reactions because they have a high surface area and can selectively adsorb water molecules, thereby helping to shift the equilibrium towards the desired product. Other drying agents, such as calcium chloride or magnesium sulfate, may also be used but they have a lower selectivity for water and may also react with the reactants or products, potentially leading to unwanted side reactions. Additionally, molecular sieves can be easily regenerated by heating, making them more cost-effective than other drying agents in the long run.

To know more about Molecular sieves click here:

https://brainly.com/question/31562171

#SPJ11

The pollutants in the ambient air that are most associated with heightened risk of death and disease are particulate matter, sulfur dioxide, nitrogen oxides, and ozone.

However, among these pollutants, particulate matter and sulfur dioxide are considered the most harmful. Sulfur dioxides are a type of air pollutant that can cause respiratory problems and aggravate existing heart and lung conditions.
Among the pollutants in the ambient air, the most associated with heightened risk of death and disease are:
a. Particulate
Particulate matter is considered more harmful than sulfur dioxides, nitrogen oxides, and ozone due to its ability to penetrate deep into the lungs and bloodstream, leading to serious health effects, such as respiratory and cardiovascular diseases.

Visit here to learn more about pollutants:

brainly.com/question/28519286

#SPJ11

In the context of chromatography, silica and alumina are commonly used as stationary phases for the separation of compounds.

If you use silica for very nonpolar compounds, they will interact weakly with the polar silica surface, resulting in rapid elution and poor separation. On the other hand, using alumina for very polar compounds will lead to strong interactions between the polar compounds and the polar alumina surface, causing slow elution and potential co-elution of similar compounds, which can also result in poor separation. To achieve optimal separation, it's essential to match the polarity of the stationary phase with the polarity of the compounds being separated.

Learn more about the stationary phase at https://brainly.com/question/29835994

#SPJ11

In order for an aldol addition to occur, at least one of the reagents must contain a carbonyl group (such as an aldehyde or ketone) as this is a requirement for the reaction to take place.

The carbonyl group serves as the electrophile and reacts with the enolate ion formed from the other reagent to form the aldol product.

To address your question, the requirement for at least one of the reagents in an aldol addition to occur is that it must possess an α-hydrogen, which is a hydrogen atom connected to the carbon adjacent to the carbonyl group. This α-hydrogen enables the formation of an enolate ion, which is crucial for the aldol addition reaction to take place.

To know more about Reagents click here .

brainly.com/question/31228572

#SPJ11

Water containing nitrates generally indicates evidence of agricultural/previous pollution. Nitrates are a common ingredient in fertilizers used in agriculture. When rainwater or irrigation water seeps through the soil, it dissolves nitrates and carries them into groundwater, rivers, and lakes.

This can result in elevated nitrate levels in water sources. Consuming water with high nitrate levels can be harmful, particularly for infants and pregnant women. Nitrate-contaminated water can also harm aquatic ecosystems by promoting excessive plant and algae growth, which can deplete oxygen levels in the water and suffocate fish and other aquatic animals.

Therefore, it is important to monitor nitrate levels in water sources and take steps to reduce pollution sources. In summary, the presence of nitrates in water is usually an indicator of agricultural or previous pollution and should be addressed to protect human and environmental health.

learn more about nitrates here: brainly.com/question/28198019

#SPJ11

Answer:

A solution is a homogeneous mixture of two or more chemical substances. If we have a solution

made from a solid and a liquid, we say that the solid is dissolved in the liquid and we call the

solid the solute and the liquid the solvent. Initially, we will consider only solutions of a solid in

water. If a solution has a small amount of solute in a large amount of solvent, we say that the

solution is dilute (or that we have a dilute solution). If a solution has a large amount of solute

for a certain amount of solvent, we say that the solution is concentrated (or that we have a

concentrated solution). We see that the terms dilute and concentrated are not precise and are

merely used to give a rough indication of the amount of solute for a given amount of solvent.

The amount of solute in a given amount of solvent (or solution) is called the concentration of

the solution. In this course, we will consider two ways of expressing concentration - mass

percent and molarity. We will consider molarity here and mass percent later.

Explanation: