In the system of linear equations -y = 2 kx - y = k,
(a) The augmented matrix can be reduced to row-echelon form by performing row operations.
(b) The system has (a) no solutions: None, (b) exactly one solution: x = 2k, y = k (in terms of k).
(c) infinitely many solutions: x = t, y = 0 (in terms of t) when k = 0.
(a) To reduce the augmented matrix for the system to row-echelon form, we can perform row operations.
Starting with the augmented matrix:
[ -1 | 2k ]
[ -1 | k ]
We can perform the following row operations to obtain row-echelon form:
Replace R2 with R2 + R1:
[ -1 | 2k ]
[ -2 | 3k ]
Now, the augmented matrix is in row-echelon form.
(b)To find the values of k for different cases, we can observe the row-echelon form:
[ -1 | 2k ]
[ 0 | k ]
From the row-echelon form, we can conclude the following:
(i) If k ≠ 0, then the system has a unique solution. The solution is x = 2k and y = k.
(ii) If k = 0, then the system has infinitely many solutions. The solution can be expressed as x = t and y = 0, where t is a parameter.
(iii) There are no values of k for which the system has no solutions.
Therefore, the system has (a) no solutions: None, (b) exactly one solution: x = 2k, y = k (in terms of k), and (c) infinitely many solutions: x = t, y = 0 (in terms of t) when k = 0.
Learn more about the system of linear equations at
https://brainly.com/question/20379472
#SPJ4
The file banking.txt attached to this assignment provides data acquired from banking and census records for different zip codes in the bank’s current market. Such information can be useful in targeting advertising for new customers or for choosing locations for branch offices. The data show
median age of the population (AGE)
median income (INCOME) in $
average bank balance (BALANCE) in $
median years of education (EDUCATION)
In this exercise you are asked to apply regression analysis techniques to describe the effect of age education and income on average account balance.
Analyze the distribution of average account balance using histogram, and compute appropriate descriptive statistics. Write a paragraph describing distribution of Balance and use appropriate descriptive statistics to describe center and spread of the distribution. Discuss your findings. Also, do you see any outliers? Include the histogram.
Create scatterplots to visualize the associations between bank balance and the other variables. Discuss the patterns displayed by the scatterplot. Also, do the associations appear to be linear? (You can create scatterplots or a matrix plot). Include the scatterplots.
Compute correlation values of bank balance vs the other variables. Interpret the correlation values, and discuss which pairs of variables appear to be strongly associated. Include the relevant output that shows the correlation values.
What is the independent variable and what are the dependent variable in this regression analysis?
Use SAS to fit a regression model to predict balance from age, education and income. Analyze the model parameters. Which predictors have a significant effect on balance? Use the t-tests on the parameters for alpha=0.05. Include the relevant regression output.
If one of the predictors is not significant, remove it from the model and refit the new regression model. Write the expression of the newly fitted regression model.
Interpret the value of the parameters for the variables in the model.
Report the value for the R2 coefficient and describe what it indicates. Include the portion of the output that includes the R2 coefficient values.
According to census data, the population for a certain zip code area has median age equal to 34.8 years, median education equal to 12.5 years and median income equal to $42,401.
Use the final model computed in step (f) above to compute the predicted average balance for the zip code area.
If the observed average balance for the zip code area is $21,572, what’s the model prediction error?
Copy and paste your SAS code into the word document along with your answers.
Age Education Income Balance
35.9 14.8 91033 38517
37.7 13.8 86748 40618
36.8 13.8 72245 35206
35.3 13.2 70639 33434
35.3 13.2 64879 28162
34.8 13.7 75591 36708
39.3 14.4 80615 38766
36.6 13.9 76507 34811
35.7 16.1 107935 41032
40.5 15.1 82557 41742
37.9 14.2 58294 29950
43.1 15.8 88041 51107
37.7 12.9 64597 34936
36 13.1 64894 32387
40.4 16.1 61091 32150
33.8 13.6 76771 37996
36.4 13.5 55609 24672
37.7 12.8 74091 37603
36.2 12.9 53713 26785
39.1 12.7 60262 32576
39.4 16.1 111548 56569
36.1 12.8 48600 26144
35.3 12.7 51419 24558
37.5 12.8 51182 23584
34.4 12.8 60753 26773
33.7 13.8 64601 27877
40.4 13.2 62164 28507
38.9 12.7 46607 27096
34.3 12.7 61446 28018
38.7 12.8 62024 31283
33.4 12.6 54986 24671
35 12.7 48182 25280
38.1 12.7 47388 24890
34.9 12.5 55273 26114
36.1 12.9 53892 27570
32.7 12.6 47923 20826
37.1 12.5 46176 23858
23.5 13.6 33088 20834
38 13.6 53890 26542
33.6 12.7 57390 27396
41.7 13 48439 31054
36.6 14.1 56803 29198
34.9 12.4 52392 24650
36.7 12.8 48631 23610
38.4 12.5 52500 29706
34.8 12.5 42401 21572
33.6 12.7 64792 32677
37 14.1 59842 29347
34.4 12.7 65625 29127
37.2 12.5 54044 27753
35.7 12.6 39707 21345
37.8 12.9 45286 28174
35.6 12.8 37784 19125
35.7 12.4 52284 29763
34.3 12.4 42944 22275
39.8 13.4 46036 27005
36.2 12.3 50357 24076
35.1 12.3 45521 23293
35.6 16.1 30418 16854
40.7 12.7 52500 28867
33.5 12.5 41795 21556
37.5 12.5 66667 31758
37.6 12.9 38596 17939
39.1 12.6 44286 22579
33.1 12.2 37287 19343
36.4 12.9 38184 21534
37.3 12.5 47119 22357
38.7 13.6 44520 25276
36.9 12.7 52838 23077
32.7 12.3 34688 20082
36.1 12.4 31770 15912
39.5 12.8 32994 21145
36.5 12.3 33891 18340
32.9 12.4 37813 19196
29.9 12.3 46528 21798
32.1 12.3 30319 13677
36.1 13.3 36492 20572
35.9 12.4 51818 26242
32.7 12.2 35625 17077
37.2 12.6 36789 20020
38.8 12.3 42750 25385
37.5 13 30412 20463
36.4 12.5 37083 21670
42.4 12.6 31563 15961
19.5 16.1 15395 5956
30.5 12.8 21433 11380
33.2 12.3 31250 18959
36.7 12.5 31344 16100
32.4 12.6 29733 14620
36.5 12.4 41607 22340
33.9 12.1 32813 26405
29.6 12.1 29375 13693
37.5 11.1 34896 20586
34 12.6 20578 14095
28.7 12.1 32574 14393
36.1 12.2 30589 16352
30.6 12.3 26565 17410
22.8 12.3 16590 10436
30.3 12.2 9354 9904
22 12 14115 9071
30.8 11.9 17992 10679
35.1 11 7741 6207
The provided dataset includes information on the median age, median income, average bank balance, and median years of education for different zip codes.
To analyze the distribution of the average account balance, a histogram can be created using the provided data. The histogram provides a visual representation of the frequency or count of different values or ranges of the average account balance. Descriptive statistics such as the mean, median, and standard deviation can be computed to describe the center and spread of the distribution. The mean represents the average balance, the median indicates the middle value, and the standard deviation measures the dispersion or spread of the data points around the mean.
Scatterplots can be generated to visualize the associations between bank balance and the other variables: age, education, and income. Scatterplots help identify any patterns or relationships between variables. By plotting bank balance on the y-axis and each of the other variables on the x-axis, we can observe how the bank balance varies with changes in each independent variable. Additionally, the scatterplots can provide insights into whether the associations appear to be linear, indicating a potentially strong relationship between the variables.
Correlation values can be computed to quantify the strength and direction of the associations between bank balance and the other variables. The correlation coefficient ranges from -1 to 1, with values closer to -1 or 1 indicating a strong negative or positive association, respectively. A correlation value of 0 suggests no linear relationship between the variables. By calculating the correlation between bank balance and each independent variable, we can determine which pairs of variables are strongly associated.
In the regression analysis, the independent variables are age, education, and income, while the dependent variable is the average account balance. A regression model can be fitted using these variables to predict the balance. The model parameters, such as the coefficients and their significance, can be analyzed. By conducting t-tests on the parameters using a significance level (alpha) of 0.05, we can determine which predictors have a significant effect on the balance.
If any predictors are found to be non-significant, they can be removed from the model, and a new regression model can be fitted. The expression of the newly fitted regression model can be written based on the remaining significant predictors.
The R2 coefficient measures the proportion of the variance in the dependent variable (balance) that can be explained by the independent variables (age, education, income). It ranges from 0 to 1, with a higher value indicating a better fit of the model. The R2 coefficient can be interpreted as the percentage of the variation in the average account balance that can be accounted for by age, education, and income.
Using the final model, the predicted average balance for a specific zip code area can be computed by plugging in the median values of age, education, and income for that area. By comparing the predicted average balance to the observed average balance, the model prediction error can be calculated.
SAS code and relevant output are requested to be provided in the document along with the answers.
To learn more about median click here :
brainly.com/question/300591
#SPJ11
factor the gcf: 12x3y 6x2y2 − 9xy3. 3x2y(4x2 2xy − 3) 3xy(4x 2xy − 3y2) 3xy(4x2 2xy − 3y2) 3x2y(4x3y − 2x2y2 − 3xy3)
The greatest common factor (GCF) of the expression 12x^3y, 6x^2y^2, and -9xy^3 is 3xy, and factoring out this GCF yields 3xy(4x^2 - 2xy - 3y^2).
To factor the GCF, we need to identify the common factors present in all the terms. In this case, the common factors among the terms are 3, x, and y. By factoring out the GCF, we can rewrite the expression as 3xy multiplied by the remaining factors.
The GCF, 3xy, is then distributed to each term within the parentheses. This process leaves us with the expression (4x^2 - 2xy - 3y^2) within the parentheses. By factoring out the GCF, we have effectively extracted the common factors, leaving behind the remaining factors that differ from term to term.
Thus, the correct factorization of the GCF is 3xy(4x^2 - 2xy - 3y^2), where the GCF 3xy has been factored out, and the remaining factors are contained within the parentheses.
To learn more about factoring, click here: brainly.com/question/29074132
#SPJ11
Use the demand function to find the rate of change in the demand x for the given price p. (Round your answer to two decimal places.)
x = 800 − p −
4p
p + 3
, p = $5
The rate of change of demand is -221. This indicates that for every $1 increase in price, the demand for the product will decrease by 221 units.
The demand function is provided as follows: x = 800 − p −4pp + 3, p = $5The problem statement requires us to use the demand function to find the rate of change in demand (x) for a given price (p) and round the answer to two decimal places.
As per the problem statement, the price is given as $5. Therefore, we substitute the value of p in the demand function: x = 800 − (5) −4(5)(5) + 3x = 787We now differentiate the demand function to find the rate of change in demand.
Since the value of x can be a function of time, the differentiation results in the rate of change of x with respect to time. However, as per the problem statement, we are interested in the rate of change of x with respect to p.
Therefore, we use the chain rule of differentiation as follows: dx/dp = dx/dx * dx/dp Where dx/dx = 1, and dx/dp is the rate of change of x with respect to p.
dx/dp = 1 * d/dp [800 - p - 4p(p) + 3]dx/dp = -1 - 4p (1+2p)dx/dp = -1 - 4p - 8p²The rate of change of demand for p = $5 is given as follows: dx/dp = -1 - 4(5) - 8(5)²dx/dp = -1 - 20 - 200dx/dp = -221Therefore, the rate of change of demand is -221.
This indicates that for every $1 increase in price, the demand for the product will decrease by 221 units.
For more such questions on increase in price
https://brainly.com/question/14798588
#SPJ8
Let f: (1, infinity) -> reals be defined by f(x) = ln(x). Determine whether f is injective/surjective/bijective.
Find a bijection from the integers to the even integers. If f: Z -> 2Z is defined by f(x) = 2x, find the inverse of f. Let g: R -> R be defined by g(x) = 2x+5 . Prove g bijective and find the inverse of g.
Let f: R -> R with f(x) = x^2, g: R -> R with g(x) = 2x+1, h: [0, infinity) -> reals with h(x) = sqrt(x).
Find the compositions of: f and g, g and f, f and h, h and f.
f(x) = ln(x) is injective but not surjective, therefore not bijective.
A bijection from Z to 2Z is f(x) = 2x, with inverse g(x) = x/2.
g(x) = 2x + 5 is bijective, with inverse g^(-1)(x) = (x - 5)/2.
Compositions: (f ∘ g)(x) = ln(2x + 5), (g ∘ f)(x) = 2ln(x) + 5, (f ∘ h)(x) = ln(sqrt(x)), (h ∘ f)(x) = |x|.
To determine whether a function is injective, surjective, or bijective, we need to analyze its properties:
Function f(x) = ln(x), defined on the interval (1, infinity):
Injective: For f to be injective, different inputs should map to different outputs. In this case, ln(x) is injective because different values of x will result in different values of ln(x).
Surjective: For f to be surjective, every element in the codomain should have a corresponding element in the domain. However, ln(x) is not surjective because its range is the set of all real numbers.
Bijective: Since ln(x) is not surjective, it cannot be bijective.
Bijection from integers to even integers:
A bijection from the set of integers (Z) to the set of even integers (2Z) can be defined as f(x) = 2x, where x is an integer. This function doubles every integer, mapping it to the corresponding even integer. It is both injective and surjective, making it a bijection.
Inverse of f(x) = 2x (defined on Z):
The inverse of f(x) = 2x is given by g(x) = x/2. It takes an even integer and divides it by 2, resulting in the corresponding integer.
Function g(x) = 2x + 5, defined on the real numbers (R):
Injective: g(x) = 2x + 5 is injective because different values of x will produce different values of g(x).
Surjective: For g to be surjective, every real number should have a corresponding element in the domain. Since g(x) can take any real number as its input, it covers the entire range of real numbers and is surjective.
Bijective: Since g(x) is both injective and surjective, it is bijective.
The inverse of g(x) = 2x + 5 can be found by solving the equation y = 2x + 5 for x:
x = (y - 5)/2
The inverse function is given by g^(-1)(x) = (x - 5)/2.
Compositions:
f and g: (f ∘ g)(x) = f(g(x)) = f(2x + 5) = ln(2x + 5)
g and f: (g ∘ f)(x) = g(f(x)) = g(ln(x)) = 2ln(x) + 5
f and h: (f ∘ h)(x) = f(h(x)) = f(sqrt(x)) = ln(sqrt(x))
h and f: (h ∘ f)(x) = h(f(x)) = h(x^2) = sqrt(x^2) = |x|
Know more about Integers here:
https://brainly.com/question/490943
#SPJ11
9.1 Problems 229 In Problems 1 through 10, sketch the graph of the function f defined for all t by the given formula, and determine whether it is periodic. If so, find its smallest period. 一九 21. f(t) = 12 ,-1 St Et 22. f(t) = 12,0 t < 21
To sketch the graph of the given function f and to determine if it's periodic, follow the steps below:
In Problems 1 through 10, sketch the graph of the function f defined for all t by the given formula, and determine whether it is periodic. If so, find its smallest period:一九 21. f(t) = 12 ,-1 St Et 22. f(t) = 12,0 t < 21
Step 1: Sketch the graph of the function f(t) = 12 ,-1 < t < E:
For the function, f(t) = 12 ,-1 < t < E, its graph is a horizontal line at y = 12. It's not a periodic function.
Step 2: Sketch the graph of the function f(t) = 12, 0 < t < 21:For the function, f(t) = 12,0 < t < 21, its graph is a horizontal line at y = 12. It's not a periodic function. Therefore, the given functions are not periodic.
To know more about graph refer to:
https://brainly.com/question/28783974
#SPJ11
which values of x are solution to the equatiob below 4x2-30=34
The equation 4x^2 - 30 = 34 can be solved to find the values of x. In this case, there are two solutions: x = -2 and x = 2.
To solve the equation 4x^2 - 30 = 34, we need to isolate the variable x.
First, we bring the constant terms to one side of the equation:
4x^2 - 30 - 34 = 0
Simplifying, we have:
4x^2 - 64 = 0
Next, we factor out the common factor:
4(x^2 - 16) = 0
Now, we can solve for x by setting each factor equal to zero:
x^2 - 16 = 0
Using the difference of squares formula, we can factor the equation further:
(x - 4)(x + 4) = 0
Setting each factor equal to zero, we have two equations:
x - 4 = 0 or x + 4 = 0
Solving for x in each equation, we find:
x = 4 or x = -4
Therefore, the solutions to the equation 4x^2 - 30 = 34 are x = -4 and x = 4.
Learn more about difference of squares formula here:
https://brainly.com/question/28990848
#SPJ11
z is a standard normal random variable. The P(-1.96 z -1.4) equals
a. 0.4192
b. 0.0558
c. 0.8942
d. 0.475
The probability P(-1.96 < z < -1.4) is approximately 0.055, which corresponds to option b. 0.0558.
To calculate the probability P(-1.96 < z < -1.4), where z is a standard normal random variable, we need to find the area under the standard normal curve between -1.96 and -1.4. This can be done by subtracting the cumulative probability at -1.4 from the cumulative probability at -1.96.
Using a standard normal distribution table or a calculator, we can find the cumulative probability at -1.96 to be approximately 0.025, and the cumulative probability at -1.4 to be approximately 0.080.
P(-1.96 < z < -1.4) is approximately 0.080 - 0.025 = 0.055.
Among the given options, the closest value to 0.055 is option b. Therefore, the correct answer is b. 0.0558.
Learn more about probability here:
https://brainly.com/question/32117953
#SPJ4
A data set includes data from 400 random tornadoes. The display from technology available below results from using the tomados test the claim that the mean tomado length is greater than 2.9 mies. Use a 0.05 significance level Identity the not and stative hypotheses statistic, P-value, and state the final conclusion that addresses the original claim
The null hypothesis is rejected since the p-value is less than the significance level of 0.05. There is enough evidence to suggest that the average tornado length surpasses 2.9 miles.
How to explain the hypothesisThe significance level is the likelihood of producing a Type I error, also known as a false positive. The significance level in this example is 0.05.
The p-value is the probability of receiving a test statistic that is at least as extreme as the one observed, assuming the null hypothesis is true. In this case, the p-value is 0.043.
There is enough data to support the idea that the average tornado length exceeds 2.9 miles.
Learn more about hypothesis on
https://brainly.com/question/11555274
#SPJ4
The following differential equations represent oscillating springs. - (i) s" + 36s = 0, $(0) = 2, s'(O) = 0. (ii) 98" + s = 0, $(0) = 6, s'(0) = 0. s. (iii) 36s" + s = 0, $(0) = 12, s' (O) = 0. 0 , (0 (iv) s" + 9s = 0, $(0) = 3, s'(0) = 0. - Which differential equation represents: (a) The spring oscillating most quickly (with the shortest period)? ? V (b) The spring oscillating with the largest amplitude?? (c) The spring oscillating most slowly (with the longest period)? ? (a) The spring oscillating with the largest maximum velocity?
(A) The differential equation that represents the spring oscillating most quickly is s" + 9s = 0
(B) The spring oscillating with the largest amplitude is represented by equation 36s" + s = 0
(C)The spring oscillating most slowly (with the longest period) is described by equation 98" + s = 0
(D)The spring oscillating with the largest maximum velocity is represented by equation s" + 36s = 0
(a) The differential equation that represents the spring oscillating most quickly (with the shortest period) is (iv) s" + 9s = 0. This is because the coefficient of s" is the largest among the given equations, which indicates a higher frequency of oscillation and shorter period.
(b) The spring oscillating with the largest amplitude is represented by equation (iii) 36s" + s = 0. This is because the coefficient of s is the largest among the given equations, which indicates a stronger restoring force and thus a larger amplitude of oscillation.
(c) The spring oscillating most slowly (with the longest period) is described by equation (ii) 98" + s = 0. This is because the coefficient of s" is the smallest among the given equations, which indicates a lower frequency of oscillation and longer period.
(d) The spring oscillating with the largest maximum velocity is represented by equation (i) s" + 36s = 0. This is because the coefficient of s is the largest among the given equations, which indicates a higher velocity during oscillation and thus the largest maximum velocity.
To know more about differential equation click here :
https://brainly.com/question/30773776
#SPJ4
which of the following is an example of a quantitative variable
An example of a quantitative variable is the number of hours spent studying for an exam.
An example of a quantitative variable is the temperature in degrees Celsius.
Quantitative variables are measurable and represent quantities or numerical values. They can be further categorized as either continuous or discrete variables. In the case of temperature, it is a continuous quantitative variable because it can take on any value within a certain range (e.g., -10°C, 20.5°C, 37.2°C).
Quantitative variables can be measured or counted, allowing for mathematical operations such as addition, subtraction, multiplication, and division to be performed on them. Other examples of quantitative variables include age, height, weight, income, and number of items sold.
for such more question on quantitative variable
https://brainly.com/question/7705888
#SPJ8
A meeting takes place between a diplomat and fourteen government officials. However, four of the officials are actually spies. If the diplomat gives secret information to one of the attendees at random, what is the probability that secret information was only given to the real officials (no spies )?
The probability that secret information was only given to the real officials (no spies) can be calculated by dividing the number of favorable outcomes by the total number of possible outcomes (all attendees).
In this scenario, there are 14 attendees in total, out of which 4 are spies. Therefore, the number of real officials is 14 - 4 = 10. The diplomat can choose any one of the 10 real officials to give the secret information to. So, the probability is given by the ratio of the number of favorable outcomes (10) to the total number of possible outcomes (14): Probability = 10 / 14 = 5 / 7 ≈ 0.714. Therefore, the probability that secret information was only given to the real officials is approximately 0.714 or 71.4%.
To know more about probability here: brainly.com/question/31828911
#SPJ11
Please help me solve for X & Y.
Find the stable distribution for the regular stochastic matrix. 0.6 0.1 0.4 0.9 Find the system of equations that must be solved to find x. Choose the correct answer below. X + y = 1 0.6x + 0.1y = X 0
There is no solution to the given system of equations hence there is no system of equations that must be solved to find x.
The given matrix is a regular stochastic matrix. A regular stochastic matrix is one that has all its entries in the range (0, 1), and its row and column sums are equal to one. To obtain the stable distribution for a regular stochastic matrix, the following steps should be followed:
Let [x y] be the stable distribution
Solve for x and y from the following system of equations:
0.6x + 0.1y = x0.4x + 0.9y = yx + y = 1
Multiplying the third equation by 10 gives 10x + 10y = 10 ----(1)
Multiplying the first equation by 10 gives 6x + y = 10x = (10 - y)/4 ----(2)
Substituting x from equation (2) into equation (1) gives:
60 - 5y = 10 - y54 = 4y y = 54/4 = 13.5
Substituting the value of y in equation (2) gives: x = (10 - y)/4 = (10 - 13.5)/4 = -1.125
This is not possible since we can't have a negative probability. Hence, there is no solution to the given system of equations. Hence, the correct answer is: There is no system of equations that must be solved to find x.
More on matrix: https://brainly.com/question/29132693
#SPJ11
1. Springtime Fabrics finds its cost function as, TC= 10Q²+10Q+10 Its demand function is P= 190 - 5Q a) Derive the MC and the AC. b) Find where the AC is minimized. c) What is the minimum AC? d) What is the profit maximizing level of output (Q)?
a) AC = 10Q² + 10Q + 10 / Q
b) Q = 2 is the point where AC is minimized.
c) AC = 50
d) The profit maximizing level of output is Q = 6.
Given the following cost function, TC = 10Q² + 10Q + 10And the demand function is, P = 190 - 5Q
a) MC stands for Marginal cost which is the cost of producing one more unit of the output.
To find the MC, we need to differentiate the cost function with respect to Q, i.e., TC = 10Q² + 10Q + 10dTC/dQ = 20Q + 10MC = 20Q + 10
Also, AC stands for Average cost which is the cost per unit of output. AC is calculated as follows:
AC = TC / Q
Substituting the value of TC in terms of Q, we get:
AC = 10Q² + 10Q + 10 / Q
b) To find where the AC is minimized, we need to differentiate the AC function with respect to Q and equate it to zero. d(AC)/dQ = 20Q - 10Q² / Q² = 0
Solving for Q, we get:
Q = 0 or 2Since the firm produces output, Q = 0 is not the answer.
Hence, Q = 2 is the point where AC is minimized.
c) Substituting Q = 2 in the AC function, we get:
AC = 10(2)² + 10(2) + 10 / 2 = 50
d) Profit maximizing level of output is where MR = MC. And, MR is calculated as follows:
MR = dTR / dQ = P * dQ / dQ = P
Substituting the value of P in terms of Q, we get:
MR = 190 - 5Q
Profit maximizing level of output is where MR = MC.190 - 5Q = 20Q + 10
Solving for Q, we get: Q = 6
The profit maximizing level of output is Q = 6.
To learn more about cost function
https://brainly.com/question/25109150
#SPJ11
In a study by Gallup, data was collected on Age of participants and their Opinion on the legality of abortion. The data is summarized in the contingency table below. Age and Opinion on legality of Abortion .Does the Opinion depend on Age? Do a hypothesis test at 5% significance level to conclude if there is any association between Age of participants and their Opinion on the legality of abortion.
To determine if there is any association between Age and Opinion on the legality of abortion, a hypothesis test can be conducted at a 5% significance level. The goal is to assess whether the Opinion depends on Age.
In order to test the association between Age and Opinion on the legality of abortion, a chi-square test of independence can be performed. This test helps determine if there is a significant relationship between two categorical variables.
The null hypothesis (H₀) assumes that there is no association between Age and Opinion, meaning the variables are independent. The alternative hypothesis (H₁) assumes that there is an association between the variables.
The chi-square test calculates the expected frequencies under the assumption of independence and compares them to the observed frequencies. If the calculated chi-square statistic exceeds the critical value at the chosen significance level (5% in this case), we reject the null hypothesis and conclude that there is evidence of an association between Age and Opinion.
By performing the chi-square test and comparing the calculated chi-square statistic to the critical value, we can make a conclusion about whether the Opinion on the legality of abortion depends on Age.
Learn more about chi-square here:
https://brainly.com/question/32379532
#SPJ11
The mass m(t), in grams, of a tumort months after it begins to grow is tet given by m(t) = Find the average rate of change, in grams per 60 month, during the sixth month of growth.
The average rate of change in grams per month of the tumor in the sixth month is about 27.975 grams per month
What is the average rate of change of a function?The average rate of a function on an interval is the ratio of the change in the value of the function to the change in the value of the input variable.
The possible function for the mass of the tumor, obtained from a similar question on the internet is; m(t) = (t·e^t)/60
Therefore, the average rate of change of the mass of the tumor in the during the sixth month of growth, can be obtained from the change in the mass from t = 5 to t = 6 as follows;
m(t) = (t·e^t)/60
m(5) = (5 × e^5)/60
m(6) = (6 × e^6)/60
The change in the mass of the tumor = m(6) - m(5) = (6 × e^6)/60 - (5 × e^5)/60
The change in the time = 6 - 5 = 1 month
The average rate of the mass of the tumor in the sixth month is therefore;
Average = ((6 × e^6)/60 - (5 × e^5)/60)/(6 - 5) ≈ 27.975 grams per month
Learn more on the average rate of change of a function here: https://brainly.com/question/29292603
#SPJ1
1. (a)
EXAMINATION
(i) How many words can be made when AA must not occur?
Using permutation, the total number of words that can be made when AA must not occur is 70.
The number of words that can be made when AA must not occur can be determined through the following ways:
Total number of words that can be made = Number of words that do not have an A + Number of words that have a single A and no other A occurs next to it
The number of words that do not have an A can be determined by arranging the 3 Bs and 2 Cs. This can be done using the following formula:
`(5!)/(3!2!) = 10`
The number of words that have a single A and no other A occurring next to it can be determined by arranging the 4 As, the 3 Bs, and 2 Cs such that no two As occur next to each other.
This can be done by treating AA as a single object. This is called a permutation with repetition which is calculated through the following formula:`
(n+r-1)!/(n-1)!` where n is the number of objects to arrange and r is the number of times an object is repeated.
Thus: `P(2 As, 3 Bs, 2 Cs) = (2+3+2-1)!/(2-1)!3!2! = 60`.
Thus, the total number of words that can be made when AA must not occur:`Total number of words = Number of words that do not have an A + Number of words that have a single A and no other A occurs next to it`= 10 + 60`= 70`.
Hence, there are 70 words that can be made when AA must not occur.
To know more about permutation refer here:
https://brainly.com/question/29990226#
#SPJ11
One card is drawn from a standard 52-card deck. Determine the probability that the card selected is not a 5.
There is a 92.3% chance that the card drawn from a standard 52-card deck is not a 5.
To find the probability that the card selected is not a 5, we need to determine the number of cards that are not 5 and divide it by the total number of cards in the deck.
In a standard 52-card deck, there are four 5s (one for each suit: hearts, diamonds, clubs, and spades).
Therefore, the number of cards that are not 5 is 52 - 4 = 48.
The total number of cards in the deck is 52.
So, the probability of selecting a card that is not a 5 is given by:
Probability = Number of favorable outcomes / Total number of outcomes
= Number of cards that are not 5 / Total number of cards in the deck
= 48 / 52
Simplifying this fraction, we get:
Probability = 12 / 13
Therefore, the probability that the card selected is not a 5 is 12/13 or approximately 0.923.
In summary, there is a 92.3% chance that the card drawn from a standard 52-card deck is not a 5.
To learn more about probability visit:
brainly.com/question/32006589
#SPJ11
Find the general solution of the following differential equation 2xdx – 2ydy = x^2ydy – 2xy^2dx.
The general solution of the following differential equation 2xdx – 2ydy = x^2ydy – 2xy^2dx is x² + C = 0
Given differential equation is: 2xdx – 2ydy = x²ydy – 2xy²dx
Now, let us write this equation in the form of an exact differential equation.
To do this, we will use the following criteria:
For the given equation Mdx + Ndy to be exact differential equation, we have to check the following:
∂M/∂y = ∂N/∂x …..(1)
On comparing the given differential equation with the exact differential equation, we have;
M = 2x and N = -2y + x²y
If we calculate ∂M/∂y and ∂N/∂x, we have;∂M/∂y = 0 and ∂N/∂x = 2xy
Therefore, as per criteria (1), we have the given differential equation as an exact differential equation.
Now, to solve the given differential equation, we will find a function F(x,y) such that,
F(x,y) = ∫(2x)dx = x² + C1 (where C1 is a constant of integration)
Now, to find the value of C1, we will differentiate F(x,y) with respect to y and equate it to N.
∂F/∂y = (-2y + x²) ∴ ∂F/∂y = N = -2y + x²y
On equating the above two expressions, we get;(-2y + x²) = -2y + x²y
∴ -2y + x² - 2y + x²y = 0 ∴ x²y - 4y = 0 ∴ y(x² - 4) = 0 ∴ y = 0 or x² - 4 = 0
Therefore, y = 0 is a trivial solution, while x² - 4 = 0 gives x = ± 2
Therefore, the general solution of the given differential equation is;
F(x,y) = x² + C1 = C2 (where C2 is a constant of integration)
Hence, we have the general solution of the given differential equation as x² + C = 0
To learn more about general solution
https://brainly.com/question/17004129
#SPJ11
(q7) Which of the following integrals gives the area of the surface obtained by rotating the curve
about the y-axis?
The integral that gives the area of the surface obtained by rotating the curve about the y-axis is obtained by integrating with respect to y and not x. It is because the cross-sectional shapes of the generated surfaces are the shells, and they are constructed perpendicular to the x-axis.
Moreover, the radius of each shell is the distance between the x-axis and the curve. So, the integral that gives the area of the surface obtained by rotating the curve about the y-axis is the following:$$A = 2π ∫_a^b x \mathrm{d}y$$where $a$ and $b$ are the y-coordinates of the intersection points of the curve with the y-axis.
Additionally, $x$ is the distance between the y-axis and the curve.To sum up, the surface area of a solid of revolution is the sum of the areas of an infinite number of cross-sectional shells stacked side by side. The area of each shell can be calculated using the formula $2πrh$, where $r$ is the radius of the shell and $h$ is the height. Then the integral is used to sum up the areas of all the shells.
For more questions on: perpendicular
https://brainly.com/question/1202004
#SPJ8
how many collections of six positive, odd integers have a sum of 18 ? note that 1 1 1 3 3 9 and 9 1 3 1 3 1 are considered to be the same collection.
We used the concept of generating functions and the binomial theorem, there are 33,649 collections of six positive, odd integers that have a sum of 18.
To find the number of collections, we used the concept of generating functions and the binomial theorem. We represented the possible values for each integer as terms in a generating function and found the coefficient of the desired term. However, since we were only interested in the number of collections and not the specific values, we simplified the calculation using the stars and bars method. By arranging stars and bars to represent the sum of 18 divided into six parts, we calculated the number of ways to arrange the dividers among the spaces. This resulted in a total of 33,649 collections of six positive, odd integers with a sum of 18.
To know more about binomial theorem, click here: brainly.com/question/30095070
#SPJ11
A $500,000 bond is retired at 101% when the unamortized premium is $4,500. Which of the following is one effect of recording the retirement?
OA $1,750 loss
OA $6,250 gain
OA $6,250 loss
OA$10.806 loss
The effect of recording the retirement is a $6,250 loss. Option C is correct.
A $500,000 bond is retired at 101% when the unamortized premium is $4,500. The effect of recording the retirement is a $6,250 loss.
How to calculate the loss: The bond is retired at 101% of its face value.
Therefore, the selling price is:Face value = $500,000Selling price = 101% of face value = 1.01 * $500,000 = $505,000The unamortized premium is $4,500.
Therefore, the book value of the bond at the time of retirement is:
Face value + Unamortized premium = $500,000 + $4,500 = $504,500.
Since the selling price is greater than the book value, there is a gain.
The gain is calculated as the difference between the selling price and the book value.
Gain = Selling price - Book value= $505,000 - $504,500 = $500
However, the question asks for the loss. Therefore, the gain is reversed:
Loss = $500Therefore, the effect of recording the retirement is a $6,250 loss. Option C is correct.
Learn more about bonds at: https://brainly.com/question/24209510
#SPJ11
A sample has a mean of 500 and standard deviation of 100. Compute the z score for particular observations of 500 and 400 and interpret what these two z values tell us about the variability of the observations. Compute z score for the observation of 500. Interpret the results Compute z score for the observation 400 and explain the result.
In terms of variability, the z-scores help us understand how each observation deviates from the mean in terms of standard deviations. A z-score of 0 means the observation has no deviation, while a negative z-score suggests the observation is below the mean and indicates a lower value relative to the average.
We use the following formula to get the z-score:
z = (x - μ) / σ
where:
x is the observation,
μ is the mean, and
σ is the standard deviation.
Let's compute the z-scores for the observations of 500 and 400.
For the observation of 500:
z score = (500 - 500) / 100 = 0
The z-score of 0 indicates that the observation of 500 is exactly at the mean of the sample. It tells us that this observation has no deviation from the mean and falls directly on the average value.
For the observation of 400:
z score= (400 - 500) / 100 = -1
The z-score of -1 indicates that the observation of 400 is 1 standard deviation below the mean. It tells us that this observation is relatively low compared to the mean and is one standard deviation away from the average value.
Learn more about Z - Score:
https://brainly.com/question/28000192
#SPJ4
A systems of the form 2 A2+ fit the flat 2 5 and the particular solution to the system is - (1) The general solution to the systems (1) If the initial value of the system is FC) - IVP find the solution to the (d) Consider the system of equations = -2012 Iz = -1 - (0) The system has a repeated eigenvalue of -1, and f = -1 is one solution to the system. Use the given eigenvector to find the second linearly independent solution to the system.
The second linearly independent solution to the system is x = 1, y = 0, z = 0.
To find the general solution to the system represented by equation (1), we need to solve for the eigenvalues and eigenvectors.
Given:
A² - 2A + 5I = 0, where A is the matrix representing the system.
Let λ be the eigenvalue and v be the corresponding eigenvector.
From the given equation:
(A - 5I)(A + I) = 0
This implies that the eigenvalues are 5 and -1.
For the eigenvalue λ = 5:
(A - 5I)v = 0
This gives us the eigenvector v₁.
For the eigenvalue λ = -1:
(A + I)v = 0
This gives us the eigenvector v₂.
Now, let's solve for the eigenvectors:
For λ = 5:
(A - 5I)v₁ = 0
Substituting A = 2A² gives us:
2A²v₁ - 10v₁ = 0
2(A² - 5)v₁ = 0
Since A² - 5I = 0, we have:
2(0)v₁ = 0
This implies that v₁ can be any non-zero vector.
For λ = -1:
(A + I)v₂ = 0
Substituting A = 2A² gives us:
2A²v₂ + 2v₂ = 0
2(A² + 1)v₂ = 0
Since A² + I = 0, we have:
2(0)v₂ = 0
Again, v₂ can be any non-zero vector.
So, we have found two linearly independent eigenvectors, v₁ and v₂.
The general solution to the system can be written as:
[tex]X(t) = c_1 * v_1 * e^{\lambda_1 * t} + c_2 * v_2 * e^{\lambda_2 * t}[/tex]
where c₁ and c₂ are arbitrary constants, v₁ and v₂ are the eigenvectors, and λ₁ and λ₂ are the corresponding eigenvalues.
Now, let's move on to the second part of the question.
Given the system of equations:
dx/dt = -2x
dy/dt = z
dz/dt = -1
We are told that the system has a repeated eigenvalue of -1 and f = -1 is one solution.
To find the second linearly independent solution, we need to find the corresponding eigenvector.
For λ = -1:
(A + I)v = 0
Substituting the given system of equations, we have:
[[0 -2 0], [0 0 1], [0 0 0]]v = 0
Solving this system of equations, we get:
-2y = 0
z = 0
Therefore, we can choose the eigenvector v = [1, 0, 0].
This second linearly independent solution corresponds to the repeated eigenvalue of -1.
To know more about linearly independent:
https://brainly.com/question/12902801
#SPJ4
Find the potential function f for the field F.
F = 2xe x2+y2 i + 2ye x2+y2 j
To find the potential function f for the given vector field F = 2xe^(x^2+y^2)i + 2ye^(x^2+y^2)j, we need to find a function whose gradient matches the components of F.
Let's assume that f(x, y) is the potential function we're looking for. The gradient of f is given by ∇f = (∂f/∂x)i + (∂f/∂y)j.
To find f, we need to equate the components of F to the corresponding partial derivatives of f:
2xe^(x^2+y^2) = ∂f/∂x
2ye^(x^2+y^2) = ∂f/∂y
We can integrate the first equation with respect to x to obtain f:
∫2xe^(x^2+y^2) dx = f(x, y) + g(y),
where g(y) is the constant of integration with respect to x. Taking the partial derivative of f(x, y) + g(y) with respect to y, we can match it with the second equation:
∂f/∂y + ∂g/∂y = 2ye^(x^2+y^2).
Since the second equation only depends on y, we can conclude that ∂g/∂y = 2ye^(x^2+y^2). Integrating this equation with respect to y, we obtain g(y) = ∫2ye^(x^2+y^2) dy.
Finally, combining f(x, y) + g(y) = ∫2xe^(x^2+y^2) dx + ∫2ye^(x^2+y^2) dy, we find the potential function f for the given vector field F:
f(x, y) = ∫2xe^(x^2+y^2) dx + ∫2ye^(x^2+y^2) dy.
Please note that finding the exact form of f may require further integration calculations.
To know more about the To find the potential function f for the given vector field F = 2xe^(x^2+y^2)i + 2ye^(x^2+y^2)j, we need to find a function whose gradient matches the components of F.
Let's assume that f(x, y) is the potential function we're looking for. The gradient of f is given by ∇f = (∂f/∂x)i + (∂f/∂y)j.
To find f, we need to equate the components of F to the corresponding partial derivatives of f:
2xe^(x^2+y^2) = ∂f/∂x
2ye^(x^2+y^2) = ∂f/∂y
We can integrate the first equation with respect to x to obtain f:
∫2xe^(x^2+y^2) dx = f(x, y) + g(y),
where g(y) is the constant of integration with respect to x. Taking the partial derivative of f(x, y) + g(y) with respect to y, we can match it with the second equation:
∂f/∂y + ∂g/∂y = 2ye^(x^2+y^2).
Since the second equation only depends on y, we can conclude that ∂g/∂y = 2ye^(x^2+y^2). Integrating this equation with respect to y, we obtain g(y) = ∫2ye^(x^2+y^2) dy.
Finally, combining f(x, y) + g(y) = ∫2xe^(x^2+y^2) dx + ∫2ye^(x^2+y^2) dy, we find the potential function f for the given vector field F:
f(x, y) = ∫2xe^(x^2+y^2) dx + ∫2ye^(x^2+y^2) dy.
Please note that finding the exact form of f may require further integration calculations.
To know more about the potential function, click here;
https://brainly.com/question/30098140
#SPJ11
What is the standard form equation of an ellipse that has vertices (-2, 14) and (-2,-12) and foci (-2,9) and (-2,-7)?
The standard form equation of an ellipse with vertices (-2, 14) and (-2, -12) and foci (-2, 9) and (-2, -7) can be expressed as (x + 2)²/16 + (y - 1)²/225 = 1.
To determine the standard form equation of the ellipse, we need to find the center, major axis length, and minor axis length. The center of the ellipse can be determined by taking the average of the vertices, which gives us (-2, (14 - 12)/2) = (-2, 1).
Next, we calculate the distances from the center to the vertices and the foci. The distance from the center to the vertices is the major axis length, and the distance from the center to the foci is related to the eccentricity of the ellipse.
The major axis length is obtained as the absolute difference between the y-coordinates of the vertices: 14 - (-12) = 26.
The distance from the center to the foci is found as the absolute difference between the y-coordinates of the foci: 9 - (-7) = 16.
Since the foci are located on the y-axis and the center is at (-2, 1), we can write the equation in the standard form:
(x + 2)²/16 + (y - 1)²/225 = 1.
This equation represents the ellipse with the given vertices and foci.
Learn more about ellipse here:
https://brainly.com/question/20393030
#SPJ11
Let v,w∈Rn. If |‖v‖=‖w‖, show that v+w and v−w are orthogonal (perpendicular).
Let v, w∈Rn. If |‖v‖=‖w‖, show that v+w and v−w are orthogonal (perpendicular). Solution: Let's assume that |‖v‖=‖w‖. Then it implies that ‖v‖2=‖w‖2... (1)Now, let's consider (v+w).(v-w) =(v.v)+(v.-w)+(w.v)+(w.-w)(dot product formula). The cross terms will be zero as we consider vectors v and w to be orthogonal. So, (v.w)+(w.v). Now, we know that, v.w = |v||w|cosθw.v = |v||w|cosθ(w -ve angle will be taken as w.v will give negative value).
Therefore, v.w + w.v = |v||w|cosθ +|v||w|cosθ= 2|v||w|cosθ. From (1) above, we can say that, |v|=|w|. So, v.w + w.v = 2|v||w|cosθ = 2|v|2cosθ = 2‖v‖2cosθ=(v+w).(v-w) = 2‖v‖2cosθ. Here, we have two vectors (v+w) and (v-w), which makes an angle of θ with each other, from the above step it is evident that the dot product of these vectors is zero.
Hence, the given two vectors are orthogonal (perpendicular). Therefore, the given statement is proved.
To know more about Orthogonal vectors, click here:
https://brainly.com/question/32196772
#SPJ11
Find the matrix A' for T relative to the basis B'. T: R2 → R2, T(x, y) = (4x – y, 3x), B' = {(-2, 1), (-1, 1)}
The matrix A' for the linear transformation T relative to the basis B' is a 2x2 matrix that represents the transformation of vectors in R2.
To find the matrix A' for the linear transformation T relative to the basis B', we need to determine how T maps the vectors in B' to their corresponding images.
The basis B' consists of two vectors: (-2, 1) and (-1, 1). We apply the transformation T to these basis vectors and express the results as linear combinations of the basis vectors in the standard basis of R2, which is {(1, 0), (0, 1)}.
For the first basis vector (-2, 1):
T((-2, 1)) = (4(-2) - 1(1), 3(-2)) = (-9, -6) = -9(1, 0) - 6(0, 1)
Similarly, for the second basis vector (-1, 1):
T((-1, 1)) = (4(-1) - 1(1), 3(-1)) = (-5, -3) = -5(1, 0) - 3(0, 1)
The coefficients of the standard basis vectors in these linear combinations give us the columns of the matrix A'. Therefore, A' = [(-9, -5), (-6, -3)].
Thus, the matrix A' for the linear transformation T relative to the basis B' is:
A' = [(-9, -5), (-6, -3)]
This matrix can be used to represent T when operating on vectors in the basis B'.
Learn more about linear transformation here:
https://brainly.com/question/13595405
#SPJ11
use cylindrical coordinates. Evaluate ∭E (x + y + z) dV , where E is the solid in the first octant that lies under the paraboloid z = 9 − x² − y².
The triple integral using these bounds ∫₀^(π/2) ∫₀^(√(9 - z)) ∫₀^(9 - r^2) (r cosθ + r sinθ + z) r dz dr dθ.
To evaluate the triple integral ∭E (x + y + z) dV in cylindrical coordinates, we first need to express the bounds of the integral and the differential volume element in cylindrical form.
The paraboloid z = 9 - x^2 - y^2 can be rewritten as z = 9 - r^2, where r is the radial distance from the z-axis. In cylindrical coordinates, the solid E in the first octant is defined by the conditions 0 ≤ r ≤ √(9 - z) and 0 ≤ θ ≤ π/2, where θ is the angle measured from the positive x-axis.
Now, let's express the differential volume element dV in cylindrical form. In Cartesian coordinates, dV = dx dy dz, but in cylindrical coordinates, we have dV = r dr dθ dz.
Now we can rewrite the triple integral using cylindrical coordinates:
∭E (x + y + z) dV = ∫∫∫E (r cosθ + r sinθ + z) r dr dθ dz.
The bounds of integration are as follows:
For z: 0 ≤ z ≤ 9 - r^2 (from the equation of the paraboloid)
For r: 0 ≤ r ≤ √(9 - z) (within the first octant)
For θ: 0 ≤ θ ≤ π/2 (within the first octant)
We can now evaluate the triple integral using these bounds:
∫∫∫E (r cosθ + r sinθ + z) r dr dθ dz
= ∫₀^(π/2) ∫₀^(√(9 - z)) ∫₀^(9 - r^2) (r cosθ + r sinθ + z) r dz dr dθ.
Performing the integration in the specified order, we can find the numerical value of the triple integral.
Learn more about triple integral here
https://brainly.com/question/17206296
#SPJ11
Consider a square whose side-length is one unit. Select any five points from inside this square. Prove that at least two of these points are within \sqrt(2)/2 units of each other. Above \sqrt(2) refers to square root of 2.
We have proven that at least two of the selected points are within √2/2 units of each other in the given square.
We have,
To prove that at least two of the five selected points are within √2/2 units of each other, we can use the Pigeonhole Principle.
Let's divide the square into four smaller squares by drawing two perpendicular lines that intersect at the center of the square.
Each smaller square will have a side length of √2/2 units.
Now, we have four smaller squares and five selected points.
By the Pigeonhole Principle, if we distribute the five points into the four squares, at least two points must be in the same smaller square.
Since the side length of each smaller square is √2/2 unit, the maximum distance between any two points within the same smaller square is √2/2 units.
Therefore, at least two of the five selected points are within √2/2 units of each other.
Thus,
We have proven that at least two of the selected points are within √2/2 units of each other in the given square.
Learn more about squares here:
https://brainly.com/question/22964077
#SPJ1
A color-blind man throws once two dice that seem identical to him. Construct the sample space S of this random experiment. Then, calculate and sketch the probability mass or density function (p.m.f. or pdf whichever appropriate) and the cumulative distribution function (CDF) of this process. A second person with proper color vision is also observing the throw. As this second person can verify the dice are actually not identical: one is green and one is orange. Repeat the exercise to reflect the point of view of the second person. Finally, identify the differences and similarities of the two viewpoints; explain
The main similarity between the two viewpoints is that the probability of each outcome is the same. This is because the dice are fair, so each outcome is equally likely.
The test space S of this arbitrary exploration is the set of all conceivable results of the two dice being tossed. Since the color-blind man cannot recognize between the dice, he will as it were be able to tell the distinction between the results based on the whole of the numbers on the two dice.
Hence, the test space S is the set of all conceivable entireties of two dice, which is {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12}.
The likelihood mass work (pmf) of this irregular try is the work that gives the likelihood of each conceivable result. Since all of the results within the test space are similarly likely, the pmf is essentially the number of results in each set isolated by the full number of results within the test space. This gives us the taking after pmf:
Result | Likelihood
2 | 1/36
3 | 2/36
4 | 3/36
5 | 4/36
6 | 5/36
7 | 6/36
8 | 5/36
9 | 4/36
10 | 3/36
11 | 2/36
12 | 1/36
The total conveyance work (CDF) of this irregular test is the work that gives the likelihood that the entirety of the two dice will be less than or rise to a certain esteem. To discover the cdf, ready to basically whole the pmf for all of the results that are less than or rise to the given esteem. For illustration, the cdf for esteem 7 is:
P(X <= 7) = 1/36 + 2/36 + 3/36 + 4/36 + 5/36 + 6/36 = 21/36 = 7/12
Ready to proceed in this way to discover the cdf for all conceivable values?
The moment individuals with appropriate color vision can recognize between the two dice, so they will be able to tell the distinction between the results based on the person numbers on the dice.
In this manner, the test space S for the moment individual is the set of all conceivable sets of numbers that can be rolled on two dice, which is {(1, 1), (1, 2), (1, 3), ..., (6, 6)}.
The pmf for the moment an individual is the same as the pmf for the color-blind man since the likelihood of each outcome is still the same. In any case, the cdf will be distinctive, since the moment individual can recognize between the results based on the person numbers on the dice. For illustration, the cdf for the esteem 7 for the moment individual is:
P(X <= 7) = 1/36 + 2/36 + 3/36 + 4/36 + 5/36 + 6/36 + 1/36 = 7/36
Typically since the moment an individual can recognize between the results (1, 6), (2, 5), (3, 4), and (4, 3), which all have an entirety of 7. The color-blind man, on the other hand, cannot recognize between these results, so he would as it were tally them as one result, (6, 6).
The most distinction between the two perspectives is that the moment an individual can recognize between the two dice, whereas the color-blind man cannot. This distinction influences the cdf from the moment an individual can recognize between results that the color-blind man cannot.
The closeness between the two perspectives is that the likelihood of each outcome is the same. Typically since the dice are reasonable, so each result is similarly likely.
To know more about probability refer to this :
https://brainly.com/question/251701
#SPJ4