False. Prior to the system reaching equilibrium, additional activities including the reverse reaction, reactant consumption, and product production are occurring as A is being transformed into B during the reaction.
The reactants are transformed into products during a chemical reaction through a sequence of processes. In addition to pushing ahead, the system is also shifting backward. As a result, processes other than A being changed into B are occurring. For instance, the opposite reaction, in which B is changed back into A, is also present.
Additionally, reactant consumption takes place, which means that when A is consumed during the forward reaction, its concentration declines. As B is created by the forward reaction, its concentration rises concurrently. As B is eaten, A is created in the opposite reaction, and vice versa. Therefore, it is untrue to state that the sole action occurring in a chemical reaction prior to equilibrium is the transformation of A into B. The response is a dynamic process that involves several simultaneous processes that all work together to bring the system's final equilibrium state about.
learn more about reverse reaction here:
https://brainly.com/question/16614705
#SPJ11
Why is it so important to monitor the speed of a variable speed pump?
a.) To prevent excessive temperatures from developing
b.) To prevent vibration from developing
c.) To prevent speed oscillation from occurring
d.) To prevent cavitation from occurring
It is important to monitor the speed of a variable speed pump To prevent excessive temperatures from developing, To prevent vibration from developing, To prevent speed oscillation from occurring, To prevent cavitation from occurring.
The correct options are a, b, c and d.
Monitoring the speed of a variable speed pump is crucial for several reasons. Firstly, excessive temperatures can develop if the speed is not properly controlled. Running the pump at too high a speed can cause friction and heat, leading to mechanical failure and potential safety hazards.
Secondly, monitoring the speed helps to prevent vibration from developing. Uncontrolled vibration can damage the pump and surrounding equipment, as well as creating noise pollution.
Additionally, speed oscillation can occur if the speed is not properly regulated, leading to inconsistent flow rates and reduced efficiency.
Finally, cavitation can occur if the speed is too high, causing bubbles to form in the fluid being pumped. This can damage the pump and decrease its lifespan. Overall, monitoring the speed of a variable speed pump helps to ensure optimal performance, prevent damage to equipment, and maintain a safe working environment.
Therefor, option a, b, c and d are correct.
For more such questions on vibration, click on:
https://brainly.com/question/11270549
#SPJ11
________ _____
•Adding large amounts of salt or sugar to foods creates a hypertonic environment for bacteria, causing plasmolysis.
•Pickling, smoking, and drying foods have been used for centuries to preserve foods.
•Osmotic pressure is never a_____ technique.
Preservation Techniques
Adding large amounts of salt or sugar to foods creates a hypertonic environment for bacteria, causing plasmolysis.
Pickling, smoking, and drying foods have been used for centuries to preserve foods.
Osmotic pressure is never a sterilization technique.
The preservation techniques and their effects on bacteria can be elaborated as follows:
Adding large amounts of salt or sugar to foods creates a hypertonic environment for bacteria, causing plasmolysis. This means that the high concentration of solutes outside the bacterial cells causes water to flow out of the cells, leading to cell shrinkage and ultimately inhibiting bacterial growth.
Pickling, smoking, and drying foods have been used for centuries to preserve foods. These methods work by either removing moisture, adding preservatives, or changing the food's environment, all of which help to slow down or prevent the growth of bacteria and spoilage.
Osmotic pressure is never a technique used for food preservation and sterilization; rather, it's a concept related to the movement of water across a semipermeable membrane in response to differences in solute concentrations. However, the principle of osmotic pressure can help us understand how some preservation techniques, such as adding salt or sugar, work by creating a hypertonic environment that leads to plasmolysis in bacteria.
To learn more about Food Preservation visit:
https://brainly.com/question/20397037
#SPJ11
What are some ways to reduce the effect of acid deposition?
There are several ways to reduce the effect of acid deposition. One method is to reduce emissions of sulfur dioxide and nitrogen oxide from power plants and factories through the use of clean technologies and alternative energy sources.
Another approach is to implement policies and regulations that encourage the reduction of air pollution. Additionally, reforestation and soil restoration can help to neutralize the effects of acid deposition on ecosystems. Overall, a combination of these strategies can help to reduce the harmful impacts of acid deposition on the environment and human health acid deposition.
Some ways to reduce the effect of acid deposition include:
1. Limiting emissions of sulfur dioxide (SO2) and nitrogen oxides (NOx) by implementing stricter regulations on industries and power plants.
2. Using cleaner energy sources, such as renewable energy like solar, wind, and hydroelectric power, to reduce reliance on fossil fuels that contribute to acid deposition.
3. Implementing energy efficiency measures to reduce overall energy consumption, thereby decreasing emissions of SO2 and NOx.
4. Encouraging the use of public transportation, carpooling, or electric vehicles to reduce emissions from vehicles, which contribute to acid deposition.
By implementing these strategies, we can effectively reduce the negative impacts of acid deposition on the environment and human health.
Learn more about acid deposition here
https://brainly.com/question/19999169
#SPJ11
determine the volume in milliliters of a 0.270 m 0.270 m naoh naoh solution needed to neutralize a 155 ml 155 ml solution of 0.180 m 0.180 m hcl hcl and 0.360 m 0.360 m h2so4.
Answer:
19⋅mL . We know that. Concentration=Amount of substance in molesVolume of solution.
Explanation:
The volume in mililitres of a solution of 0.270 M NaoH solution needed to neutralize a 155 ml solution is 950 ml
We have
N₁V₁=N₂V₂
Where N= normality, V=Volume
Normality= basicity ×molarity
For H₂SO₄ basicity=2
Normality =0.360 × 2
=0.720 N
For HCl basicity=1
normality = 0.180×1
=0.180 N
Total strength N₂= 0.720N +0.180N =0.900N
N₁= 0.270 N
V₂= 285 ml
substituting all values we get
V₁= N₂V₂/N₁
=0.900N ×285ml/0.270N
=950 ml
To know more about NaOH solution here
https://brainly.com/question/30007576
#SPJ2
Question 55 Marks: 1 If sufficient amounts of activated carbon in the powdered form are used, practically all tastes and odors are removed from water byChoose one answer. a. absorption b. polymerization c. adsorption d. oxidation
If sufficient amounts of activated carbon in the powdered form are used, practically all tastes and odors can be removed from water by adsorption.
Why will be sufficient amounts of activated carbon in the powdered form are used?Activated carbon is a highly porous form of carbon that is treated with oxygen to open up millions of tiny pores between the carbon atoms. These pores increase the surface area of the carbon and make it an excellent adsorbent material.
When activated carbon is added to water, it adsorbs a wide range of organic and inorganic contaminants, including tastes and odors, onto its surface.
Adsorption is a process by which a substance in a fluid is attracted to and adheres to the surface of a solid. In the case of activated carbon, contaminants in the water are attracted to and adhere to the surface of the carbon pores.
The carbon pores are so small that they can trap molecules of various sizes, including those responsible for tastes and odors in water.
Activated carbon can be used in a variety of water treatment applications, including municipal water treatment, industrial water treatment, and home water filters.
Learn more about sufficient amounts
brainly.com/question/28362783
#SPJ11
What is the coefficient of O2 when the following equation is properly balanced?___ CH3OH + ___ O2 = ___ CO2 + ___ H2OA) 1 B) 2 C) 3 D) 7 E) none of these
Answer:
C. 3
Explanation:
The balanced chemical equation for the combustion of methanol (CH3OH) is: 2 CH3OH + 3 O2 = 2 CO2 + 4 H2O. Therefore, the coefficient of O2 is 3. The correct answer is C) 3.
A(n) _____ removes hydrogen ions and a(n) _____ releases hydrogen ions.
a) compound, element
b) acid, base
c) base, acid
d) molecule, acid
e) element, compound
acid and base.
A base is a chemical that removes hydrogen ions from water by releasing hydroxide ions (OH-), whereas an acid produces hydrogen ions (H+) when it dissolves in water. Acids have a low pH, while bases have a high pH, and are sometimes viewed as the two extremes of a pH scale. An acid and a base can react to neutralise one another and produce water and salt when they are together. We refer to this as an acid-base reaction. The pH scale, which spans from 0 (extremely acidic) to 14 (very basic or alkaline), with 7 being neutral, measures the concentration of hydrogen ions in a solution.
learn more about acid here:
https://brainly.com/question/14072179
#SPJ11
After 3-PGA is phosphorylated, it receives energized electrons from _____.- NADPH - NADP+ - ADP - CO2 - ATP
After 3-PGA is phosphorylated, it receives energized electrons from NADPH.
In the Calvin cycle, there are three steps involved:
1. Carbon Fixation: In this step, the carbon molecule is fixed that is the Carbon atom from carbon dioxide is fixed by conjugation with RuBP. The compound formed after is 3-PGA.
In this step, no ATP molecules are required.
2. Reduction: This step involves the reduction of the fixed carbon, into the formation of G3P which further produces carbohydrates. This step requires 2 ATP and 2 NADPH for each G3P molecule. After phosphorylation by ATPs 3-PGA receives energy from NADPH.
3. Regeneration of RuBP: This step is used to regenerate the used RuBP molecule used in the first step which is the fixation of carbon. This step requires five ATP per RuBP regeneration.
Learn more about the Calvin cycle:
brainly.com/question/920840
#SPJ4
Mechanistically, what is the source of the hydroxide ion that catalyzes the dehydration in the synthesis of dibenzalacetone?
In the synthesis of dibenzalacetone, the source of the hydroxide ion that catalyzes the dehydration step is the base that is added to the reaction mixture.
The dehydration step involves the elimination of a water molecule from the intermediate formed in the condensation step, which results in the formation of the final product, dibenzalacetone. This reaction is usually carried out in the presence of a strong base, such as sodium hydroxide or potassium hydroxide, which can abstract a proton from the hydroxyl group of the intermediate, generating a hydroxide ion as a nucleophile.
The hydroxide ion can then attack the beta-carbon of the intermediate, leading to the formation of a and the elimination of a molecule of water. This process is called an E1cB (Elimination Unimolecular Conjugate Base) reaction mechanism.
Therefore, the hydroxide ion that catalyzes the dehydration in the synthesis of dibenzalacetone is derived from the strong base that is added to the reaction mixture.
learn more about sodium bicarbonate here
https://brainly.com/question/20670487
#SPJ4
Question 59
Mobilization of metals in acid water becomes a direct threat to human health when:
a. Plankton absorb the metal
b. The acidified water is a source of drinking water
c. Fish are present in the water and die
d. Algae disappear from the water
b. The mobilization of metals in acid water becomes a direct threat to human health when the acidified water is a source of drinking water.
This is because the metals can accumulate in the body over time and cause health problems such as kidney damage, neurological disorders, and cancer. It is important to treat and monitor acid water sources to prevent harm to human health.When acid water mobilizes metals, it can dissolve heavy metals and other harmful substances. If the acidified water is consumed as drinking water, these harmful substances can be ingested by humans, posing a direct threat to their health.
learn more about acidified Refer: https://brainly.com/question/23649888
#SPJ11
Provide the balanced rxn equation for the rxn that occurs when the mixture of initial reactants forms a clear yellow soln n the dibenzalacetone synthesis.
The balanced reaction equation for the formation of dibenzalacetone from the initial reactants that form a clear yellow solution is:
2C6H5CHO + C6H5CH=CHCHO → C17H14O + 2H2O
In this equation, C6H5CHO and C6H5CH=CHCHO are the reactants, which undergo a condensation reaction to form the product C17H14O (dibenzalacetone) and water (H2O).
Hi! In the dibenzalacetone synthesis, the balanced reaction equation for the formation of a clear yellow solution involves the condensation of acetone with benzaldehyde. The reactants and product in this reaction are as follows
2 C₆H₅CHO (benzaldehyde) + CH₃COCH₃ (acetone) → C₁₇H₁₄O (dibenzalacetone) + H₂O (water)
This balanced equation represents the mixture of initial reactants producing a clear yellow solution of dibenzalacetone.
To know more about Dibenzalacetone click here .
brainly.com/question/19340462
#SPJ11
give a formula corresponding to the following name: dibromobis(ethylenediamine)cobalt(iii) sulfate g
The formula corresponding to the following name Dibromobis(ethylenediamine)cobalt(III) sulfate is [Co(en)₂(Br)₂]₂SO₄.
The number of atoms of each element in one molecule of a chemical is expressed by the molecular formula. The formula that displays the precise number of each atom in a molecule is known as a molecular formula. The Molecular method is determined using the empirical method when the molar mass value is known.
n=molar mass/the empirical formula's mass
The empirical formula or an exact multiple of it, as well as the molecular formula, are frequently the same.
Since Cation is written before anion, hence we can say that complex ion (Dibromobis(ethylenediamine)Cobalt(III)) is a cation, and counter ion (Sulfate) is an anion.
In the second step, we will try to write the complex basis the below information :-
Central atom is CobaltThere are 2 ligand 2.1 en (neutral) and there is 2 of them. 2.2 Bromine (negative), 2 of themOxidation state of Co is +1Basis above information, formula is :- [Co(en)₂(Br)₂]₂SO₄.
Learn more about Formula:
https://brainly.com/question/30353496
#SPJ4
(d) "If a suitable solid catalyst were placed in the reaction vessel, would the final total pressure of the gases at
equilibrium be great than, less than, or equal to the final total concentration of the gases at equilibrium without
the catalyst? Justify your answer. (Assume that the volume of the solid catalyst is negligible). (e) Predict whether the partial pressure of CO2
(g) will increase, decrease, or remain the same as this system
approaches equilibrium. Justify your prediction with a calculation.
d.) The addition of a solid catalyst will not affect the total pressure of the gases, since its volume is negligible. e.) The partial pressure of [tex]CO_2[/tex] ([tex]P_{CO_2}[/tex]) will decrease as the system approaches equilibrium.
(d) If a suitable solid catalyst were placed in the reaction vessel, the final total pressure of the gases at equilibrium would be equal to the final total pressure of the gases at equilibrium without the catalyst. This is because a catalyst only speeds up the reaction by providing an alternate reaction pathway with a lower activation energy, but it does not affect the position of the equilibrium itself. As a result, the equilibrium constant, concentrations, and partial pressures of the gases involved in the reaction will remain the same.
(e) To predict whether the partial pressure of [tex]CO_2[/tex] (g) will increase, decrease, or remain the same as the system approaches equilibrium, we would need to know the reaction involved and the initial concentrations or pressures of the gases.
Kp = [tex](P_{CO})^2/P_{CO_2} = (6.74 atm)^2/1.63 atm = 27.9[/tex][tex](P_{CO_2})^2/(P_{CO_2}) = (2atm)^2/2atm = 2atm < Kp(=27.9)[/tex]
Q = (PCO2)^2/(PCO2) = (2atm)^2/2atm = 2atm < Kp(=27.9)
To learn more about catalyst click here https://brainly.com/question/24430084
#SPJ11
Complete question: Solid carbon and carbon dioxide gas at 1,160 K were placed in a rigid 2.00 L container, and the reaction represented above occurred. As the reaction proceeded, the total pressure in the container was monitored. When equilibrium was reached, there was still some C(s) remaining in the container.
c.) For the reaction mixture at equilibrium at 1,160 K, the partial pressure of the CO2(g) is 1.63 atm.
(d) "If a suitable solid catalyst were placed in the reaction vessel, would the final total pressure of the gases a equilibrium be great than, less than, or equal to the final total concentration of the gases at equilibrium without the catalyst? Justify your answer. (Assume that the volume of the solid catalyst is negligible).
(e) Predict whether the partial pressure of CO2(g) will increase, decrease, or remain the same as this system approaches equilibrium. Justify your prediction with a calculation.
Catalytic converters in automobiles use a heterogeneous transition metal catalyst that increases the rate at which carbon monoxide is converted to carbon dioxide.
True or False?
True. Catalytic converters in automobiles use a heterogeneous transition metal catalyst, often made of platinum, palladium, or rhodium, to increase the rate at which carbon monoxide is converted to carbon dioxide, reducing harmful emissions.
Catalytic converters change poisonous molecules like carbon monoxide and various nitrogen oxides in car exhausts into more harmless molecules like carbon dioxide and nitrogen. They use expensive metals like platinum, palladium and rhodium as the heterogeneous catalyst. Palladium is used as catalytic converters, which convert up to 90% of harmful gases from auto exhaust (hydrocarbons, carbon monoxide, and nitrogen dioxide) into less-harmful substances (nitrogen, carbon dioxide, and water vapor).
The catalytic converter helps to reduce airborne pollutants that could harm people as well as the environment, turning 90% of harmful emissions into less harmful gasses. A well-maintained catalytic converter improves the efficiency of your car, directly affecting its overall health and performance.
To know more about catalytic convertor Please click:-
brainly.com/question/18447466
#SPJ11
Question 2 Marks: 1 Stream pollution is sometimes apparent byChoose one answer. a. increased levels of available oxygen in the water b. a zone of degradation c. large numbers of crayfish and cristivomer species d. large numbers of small fish
B. A zone of degradation. Sometimes, stream pollution can be seen by a visible decrease in water quality, leading to degraded areas within the stream or river.
This can be caused by a variety of factors, including agricultural runoff, industrial waste, and improper disposal of household chemicals. The presence of these pollutants can harm aquatic life, decrease oxygen levels, and create a zone of degradation within the waterway.
The method of degradation that can be employed to break down excess carbs is lysosomal degradation.
Lysosomes play a function in the breakdown of carbohydrates. When glycoproteins and glycosaminoglycans break down, monosaccharides and sulphate are produced. Typically, these products are ejected from the lysosomes before they can once again join the biosynthetic pathways.
Additionally aids in the breakdown of glycosphingolipids. For the enzymes to break down carbs, an acidic environment is necessary.
In addition to their function in protein degradation, enzymes also play a part in the fusing of other organelles, the breakdown of big structures or cellular waste, and the fusion of other organelles.
Learn more about carbohydrates here
https://brainly.com/question/30757532
#SPJ11
immediately after introducing the copper into the water, what do you expect will happen to the temperature of the water?
When copper is introduced into water, it is expected that the temperature of the water will remain relatively unchanged.
This is because copper is a good conductor of heat, meaning it can quickly transfer any heat it may have to the surrounding water molecules. Therefore, the copper will not cause a significant increase or decrease in the temperature of the water.
After introducing the copper into the water, you can expect the temperature of the water to change depending on the initial temperature of the copper. If the copper is warmer than the water, it will transfer heat to the water, causing the water's temperature to increase.
Conversely, if the copper is cooler than the water, it will absorb heat from the water, leading to a decrease in the water's temperature. This heat exchange will continue until the copper and water reach thermal equilibrium.
To know more about temperature click here
brainly.com/question/29072206
#SPJ11
Immediately after introducing the copper into the water, I expect the temperature of the water to change based on the following terms:
1. Heat transfer: If the copper is at a different temperature than the water, heat will transfer between the two substances until they reach thermal equilibrium.
2. Specific heat capacity: The specific heat capacity of copper and water are different, with water having a higher specific heat capacity. This means that water can absorb more heat without a significant temperature increase compared to copper.
3. Thermal conductivity: Copper has a high thermal conductivity, which means it transfers heat quickly. As a result, the temperature of the water may change relatively fast upon introducing the copper.
In summary, when you introduce the copper into the water, the temperature of the water will change due to heat transfer, specific heat capacity, and thermal conductivity. The specific direction of the temperature change (increase or decrease) will depend on the initial temperatures of the copper and the water.
To know more about Thermal conductivity:
https://brainly.com/question/7643131
#SPJ11
which sentence about sound is correct?
sound can not travel through air.
sound can not travel through stone.
sound can not travel through a vacuum.
sound can not travel through water.
Answer:
the answer is sound can not travel through stone
A gas at 110 kPa and 30.0 0C fills a flexible container with an initial volume of 2.00L. If the temperature is raised to 80.0 0C and the pressure increases to 440 kPa, what is the new volume? SHOW YOUR WORK FOR FULL CREDIT
Answer:
To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas:
(P1V1)/T1 = (P2V2)/T2
where P1, V1, and T1 are the initial pressure, volume, and temperature of the gas, and P2, V2, and T2 are the new pressure, volume, and temperature of the gas.
We are given:
P1 = 110 kPa
V1 = 2.00 L
T1 = 30.0°C = 303.15 K
We need to find V2, given:
P2 = 440 kPa
T2 = 80.0°C = 353.15 K
Substituting these values into the combined gas law equation, we get:
(110 kPa)(2.00 L)/(303.15 K) = (440 kPa)(V2)/(353.15 K)
Solving for V2, we get:
V2 = (110 kPa)(2.00 L)(353.15 K)/(303.15 K)(440 kPa) = 1.55 L
Therefore, the new volume of the gas is 1.55 L.
Which factor causes a decrease in the rate of dissolution?
There are several factors that can cause a decrease in the rate of dissolution:
Decrease in temperature: As the temperature decreases, the kinetic energy of the particles decreases, and the rate of dissolution also decreases.
Increase in solute concentration: If the solution is already saturated with solute, then adding more solute will cause it to become supersaturated, which can cause a decrease in the rate of dissolution.
Increase in pressure: Increasing the pressure can force more solute into the solution, but it can also cause an increase in the solubility of the solute, which can cause a decrease in the rate of dissolution.
Decrease in surface area: If the solute is in the form of large particles, then breaking it down into smaller particles will increase the surface area available for dissolution and increase the rate of dissolution. Conversely, decreasing the surface area will decrease the rate of dissolution.
Formation of a precipitate: If the solute is capable of forming a precipitate in the solution, then the rate of dissolution may decrease as the solute is removed from the solution and deposited as a solid.
~~~Harsha~~~
Together with Ca, this mineral in involved in muscle contractions and blood clotting. What mineral is this?
The mineral that is involved in muscle contractions and blood clotting, together with Calcium (Ca), is Magnesium (Mg).
Both minerals play crucial roles in these physiological processes. Magnesium is an essential mineral for muscle contraction, nerve conduction, and blood clotting. It helps to relax and contract muscles, and it is also involved in nerve signaling and the release of energy from food. Magnesium is also necessary for blood clotting, as it helps to activate certain enzymes involved in the clotting process. Magnesium is also required for the production of energy and helps to regulate blood glucose levels, as well as being important for maintaining healthy bones and teeth.
learn more about Magnesium refer: https://brainly.com/question/1533548
#SPJ11
Which basic electrical unit is used to measure a material's opposition to the flow of electricity?
a.) Ampere
b.) Ohm
c.) Volts
d.) Resistance or impedance
The basic electrical unit used to measure a material's opposition to the flow of electricity is the Ohm. The correct answer is option b.
Ohm is the unit of electrical resistance and is represented by the symbol Ω. Resistance, or impedance in the case of alternating current (AC) circuits, quantifies how much a material hinders the flow of electric current.
Resistance occurs because of collisions between charge carriers, such as electrons, and the atoms in the material. Materials with higher resistance values impede the flow of electric current more than those with lower values.
Ohm's Law, which is represented by the formula V = IR, relates voltage (V), current (I), and resistance (R) in a circuit. In this equation, voltage is measured in volts, current is measured in amperes, and resistance is measured in ohms.
Therefore, option b is correct.
For more such questions on electricity, click on:
https://brainly.com/question/24154868
#SPJ11
A pH reading of 6.0 units indicates that the water sample is:
a. Very acidic
b. Slightly alkaline
c. Very alkaline
d. Slightly acidic
Answer c
the answer is c
Phenolphthalein has often been used to monitor the progress of acid-base neutralization reactions.
What color will phenolphthalein be if there is an excess of base present?
A) colorless
B) green
C) pink
D) yellow
Pink color will phenolphthalein be if there is an excess of base present.
If there is an excess of base present in an acid-base neutralization reaction, phenolphthalein will turn --pink . Phenolphthalein is a commonly used acid-base indicator that is colorless in acidic solutions and pink in basic solutions.
When an acid-base neutralization reaction occurs, the pH of the solution changes from acidic to basic as the reaction progresses. Once all the acid has reacted with the base, any additional base that is present will increase the pH of the solution and cause phenolphthalein to turn pink, indicating the presence of excess base. Therefore, the correct answer is C) pink.
Visit to know more about Phenolphthalein:-
brainly.com/question/31497639
#SPJ11
Which of the following statements is correct for an endothermic reaction?
- The activation energy of the forward reaction is equal to the difference of the activation energy for the reverse reaction and the enthalpy change for the forward reaction.
- The activation energy for the forward and reverse reactions is equal.
The activation energy of the forward reaction is equal to the enthalpy change for the reverse reaction.
- The activation energy of the forward reaction is equal to the sum of the activation energy for the reverse reaction and the enthalpy change for the forward reaction.
The activation energy of the forward reaction is equal to the sum of activation energy for the reverse reaction and the enthalpy change for the forward reaction.
Why is the endothermic reaction a forward one?The forward reaction will take place if the reaction is endothermic as specified, increasing the amounts of the products and lowering the amounts of reactants. If the temperature is reduced, the result will be the opposite.
An endothermic reaction: why is that?Any chemical process that takes heat from the surroundings is said to be endothermic. The energy that was absorbed provides the activation energy for the process. This kind of response is characterised by its icy sensation.
To know more about enthalpy change visit:-
https://brainly.com/question/29556033
#SPJ1
How do heat and acid affect the green chlorophyll molecule?
Both heat and acid can negatively impact the green chlorophyll molecule by causing it to degrade and lose its green color, which affects the plant's ability to perform photosynthesis effectively.
Heat and acid both affect the green chlorophyll molecule in different ways.
1. Heat: When chlorophyll is exposed to high temperatures, the molecule becomes unstable and starts to degrade. This degradation process results in the loss of its green color, which in turn affects the photosynthetic capacity of plants. The breakdown of chlorophyll can also lead to the formation of other pigments, such as carotenoids, which might cause a change in the color of the plant.
2. Acid: Exposure to acidic conditions can also cause chlorophyll to break down. Acidic environments can cause protonation of certain parts of the chlorophyll molecule, altering its structure and eventually leading to degradation. This process also results in the loss of the green color and reduced photosynthetic activity.
learn more about acidic Refer: https://brainly.com/question/14072179
#SPJ11
Only primary alcohols can be oxidized to carboxylic acids. T/F?
Answer: True. Only primary alcohols can be oxidized to carboxylic acids using an oxidizing agent such as potassium permanganate (KMnO4) or chromium trioxide (CrO3) in an acidic solution. Secondary alcohols can be oxidized to ketones, but not to carboxylic acids, while tertiary alcohols cannot be oxidized at all using these reagents.
Explanation:
26. In a linked-based implementation of the ADT list with only a head reference, what is the performance of removing an entry at the end of the list? a. O(n) b. O(n 2 ) c. O(log n) d. O(1)
The performance of removing an entry at the end of a linked-based implementation of the ADT list with only a head reference is O(n).
This is because in order to remove the last entry, we need to traverse the entire list to find the second-to-last node, and then update its reference to null. This traversal requires visiting every node in the list, so the time complexity is proportional to the length of the list, which is O(n). Therefore, the correct answer is (a) O(n).
To know more about ADT list, please click on:
https://brainly.com/question/13440204
#SPJ11
what happens when chloro Methane is heated with sodium in the presence of dry ether ?(wurtz reaction)
The Wurtz reaction occurs when chloromethane is heated with sodium in the presence of dry ether. The reaction produces two molecules of methane and sodium chloride.
Why is dry ether needed to make the Grignard reagent?Since it forms a stable complex when reacting with Grignard reagents, ether is also utilised as a solvent. The ionic magnesium-halogen link dissolves the ether's carbon-oxygen bond, creating a stable complex and enhancing the Grignard reagent's reactivity.
When dry ether is present, what is treated with magnesium?Find out how Grignard's reagent affects carbonyl compounds. Based on this, you may use the reaction mechanisms for the specified named reactions to identify the first responding molecule.
To know more about Wurtz reaction visit:-
https://brainly.com/question/28330368
#SPJ1
we add excess na2cro4 solution to 51.0 ml of a solution of silver nitrate (agno3) to form insoluble solid ag2cro4. when it has been dried and weighed, the mass of ag2cro4 is found to be 0.670 grams. what is the molarity of the agno3 solution? answer in units of m.
The need to use stoichiometry and the concept of limiting reagents. When excess Na2CrO4 is added to AgNO3, it forms an insoluble solid Ag2CrO4. The balanced chemical equation for this reaction is 2AgNO3 + Na2CrO4 → Ag2CrO4(s) + 2NaNO3.
The mass of Ag2CrO4 produced is 0.670 grams. Using the molar mass of Ag2CrO4 (331.73 g/mol), we can calculate the number of moles of Ag2CrO4. 0.670 g Ag2CrO4 x (1 mol Ag2CrO4/ 331.73 g Ag2CrO4) = 0.00202 mol Ag2CrO4
Since the reaction is a 1:1 stoichiometric ratio between Ag2CrO4 and AgNO3, we know that the number of moles of AgNO3 present in the original solution is also 0.00202 mol. We can calculate the molarity of the AgNO3 solution by dividing the number of moles by the volume of the solution in liters Molarity = moles of solute / volume of solution (in liters) The volume of the solution is given as 51.0 mL or 0.0510 L. Therefore Molarity = 0.00202 mol / 0.0510 L = 0.0396 M Therefore, the molarity of the AgNO3 solution is 0.0396 M. In summary, we can determine the molarity of a solution of AgNO3 by adding excess Na2CrO4 and allowing the formation of an insoluble solid, Ag2CrO4. We can then use stoichiometry to calculate the number of moles of AgNO3 and use that to calculate the molarity of the solution.
learn more about solid here.
https://brainly.com/question/17061172
#SPJ11
3. This chart shows the mean age and standard deviation for students in three dance classes. Use these
data to answer the questions.
Class
Morning
Noon
Evening
Mean (years)
8.9
15
22
Standard deviation
(years)
2.4
1.2
0.8
a) Which class has the highest average age? Morning / Noon / Evening
b) Which class has ages that are the most spread out? Morning / Noon / Evening
c) If the noon class has a symmetric distribution, what is the median?.
According to the information we can infer that the class with the highest average age is the Evening class, the class with the most spread out ages is the Morning class, and the mean age of the noon class is 15 years.
Which class has the highest average age?To identify which class has the oldest average age, we must analyze the information in the graph. As we can see, the night class has a mean of 22 years, so we can infer that their average age is higher.
Which class has ages that are the most spread out?To identify the class that has the greatest spread out age is the one that has the highest standard deviation. In this case it would be the morning class that has a standard deviation of 2.4
If the noon class has a symmetric distribution, what is the median?To identify the mean of the noon class, we must take into account that its distribution is symmetrical, so the value of the mean would be the same as the median, that is, 15 years.
Learn more about statistics at: https://brainly.com/question/31538429
#SPJ1