A 0.4550g solid mixture containing MgSO4 is dissolved in water and treated with an excess of Ba(NO3)2, resulting in the precipitation of 0.6168g of BaSO4.Find the concentration (percent) of MgSO4 in the mixture.How do you start?

The class with the highest average age is the Evening class, with a mean of 22 years. The class with the ages that are the most spread out can be determined by comparing the standard deviations.

The empirical rule of statistics asserts that 99.7% of data in a normal distribution falls within three standard deviations of the mean. In order to do this, 68% of the observed data will fall within the first standard deviation, 95% within the second deviation, and 97.5% within the third standard deviation.

With the normal distribution, 68% of the observations fall within one standard deviation of the mean, 95% fall within two standard deviations of the mean, and 99% fall within three standard deviations of the mean.

To know more about average visit:-

https://brainly.com/question/31358056

#SPJ1

A bond in which one atom contributes both bonding electrons is called a polyatomic covalent bond" is Never True,Option (1)

A bond in which one atom contributes both bonding electrons is called a coordinate covalent bond, not a polyatomic covalent bond. In a coordinate covalent bond, one atom contributes a lone pair of electrons to be shared with another atom. In a polyatomic covalent bond, two or more atoms share pairs of electrons to form a stable molecule or compound.

Polyatomic ions are ions that are composed of two or more atoms that are linked by covalent bonds, but that still have a net deficiency or surplus of electrons, resulting in an overall charge on the group.

Learn more about polyatomic covalent bond

https://brainly.com/question/2496976

#SPJ4

Full Question : A bond in which one atom contributes both bonding electrons is called a polyatomic covalent bond.

X-ray is not a part of particulate radiation. The correct answer is option d.

Particulate radiation is composed of particles with mass such as protons, neutrons, and electrons. X-rays, on the other hand, are a form of electromagnetic radiation and do not have mass or charge.

X-rays are produced when high-energy electrons collide with a metal target and can penetrate through materials, making them useful for medical imaging and industrial inspection.

However, they can also be harmful to human health if exposure is prolonged or at high doses. In contrast, particulate radiation can be stopped by a material barrier, such as clothing or walls, but can be more damaging to biological tissue if absorbed due to their mass and charge.

It is important to be aware of the different types of radiation and their potential effects to take appropriate safety precautions.

Therefore, option d is correct.

For more such questions on X-ray, click on:

https://brainly.com/question/28299888

#SPJ11

Thin layer chromatography (TLC) is a chromatographic technique which is used to separate the components of a mixture using a stationary phase and a mobile phase.

In TLC, the plate is spotted at a point above the solvent front and the solvent moves up the plate by capillary action leading to the separation of the various components of the mixture spotted on the plate.

However, if the TLC plate is allowed to remain in the developing chamber for too long such that the solvent front reaches the top of the plate, the components of the mixture will recombine at the top of the plate and cancel out any separation which may have occurred on the plate.

To know more about TLC here

https://brainly.com/question/28814348

#SPJ4

Out of the options given, vinegar would be the best solution to dissolve hard water deposits around your bathroom sink. This is because vinegar is a mild acid that can break down the calcium carbonate without damaging the surface of the sink.

Bleach and ammonia are not recommended as they are harsh chemicals that can damage the sink and emit toxic fumes if mixed with other cleaning products. Lye, although effective, is a strong alkali that can cause chemical burns and should be handled with extreme caution.

To use vinegar, mix equal parts of vinegar and water and apply it to the affected areas. Let it sit for a few minutes before scrubbing the area with a soft-bristled brush or cloth. Rinse with water and repeat the process if necessary.

It's important to note that prevention is key when it comes to hard water deposits. Regularly cleaning your bathroom sink with a mild cleaner and wiping it dry after use can help prevent the buildup of calcium carbonate.

learn more about hard water deposits  here: brainly.com/question/14424069

#SPJ11

The performing a melting point determination on a compound with a melting point of 170°C, the voltage used should be determined by the specific apparatus being used. The voltage required will depend on the heating rate of the apparatus and the specific properties of the compound being tested.

The important to use a voltage that allows for a gradual and controlled increase in temperature, to ensure an accurate determination of the melting point. According to a source I found on Quizlet1, the voltage in volts that should be used when performing a melting point determination on a compound whose melting point is 170 Degrees C is 50 volts. The formula used to calculate this voltage is Melting Point in Degrees C + 52.5 / 4.45 = 170 + 52.5 / 4.45 = 50 volts.

learn more about voltage here.

https://brainly.com/question/27104137

#SPJ11

The two conditions to consider when deciding if a chemical reaction is spontaneous are: Enthalpy (ΔH): This is the measure of the heat energy that is released or absorbed during a chemical reaction.

A negative value of enthalpy (ΔH < 0) indicates that the reaction releases heat energy and is exothermic, while a positive value of enthalpy (ΔH > 0) indicates that the reaction absorbs heat energy and is endothermic. A spontaneous reaction typically involves a decrease in enthalpy (ΔH < 0), as this means that the reaction releases heat energy and becomes more stable.

Entropy (ΔS): This is the measure of the disorder or randomness of a system. A positive value of entropy (ΔS > 0) indicates that the system becomes more disordered or random, while a negative value of entropy (ΔS < 0) indicates that the system becomes more ordered or less random. A spontaneous reaction typically involves an increase in entropy (ΔS > 0), as this means that the reaction becomes more disordered and more favorable from a thermodynamic perspective.

Together, the two conditions of enthalpy and entropy are summarized by the Gibbs free energy (ΔG), which is the measure of the overall spontaneity of a reaction. If ΔG is negative, the reaction is spontaneous, while if ΔG is positive, the reaction is non-spontaneous.

To know more about Enthalpy

brainly.com/question/16720480

#SPJ11

Answer:

When we burn fuels, it begins a process called combustion. Combustion is where you burn a fuel in the presence of an oxidant like oxygen. Heat is produced, because the bonds in the fuel store more energy than the bonds in the water and carbon dioxide that are the products of combustion.

Hope it helped! :)

The answer is B. I and ill. Steel is particularly well suited for structural framing because of its relative strength and low cost.

Steel is well suited for structural framing due to its high strength and ease of fabrication. It is also a relatively low-cost material, which makes it an attractive option for many construction projects. However, steel is not known for its corrosion resistance, and it can be vulnerable to rust and other forms of corrosion over time. Steel is also not particularly fire resistant, and it can lose its strength quickly when exposed to high temperatures.

Therefore, only options (I) and (III) are correct, indicating that steel is well suited for structural framing because of its strength and low cost.

To learn more about corrosion, refer:-

https://brainly.com/question/31313074

#SPJ11

The injection of compressed air into the filter media just prior to and/or during the backwashing process is a common form of air scouring in water treatment.

Here are some additional points about air scouring in water treatment:

Air scouring is a process used to enhance the cleaning of filter media during backwashing by loosening and removing any accumulated debris or particulate matter that may have accumulated in the filter bed. This process is typically used in conjunction with other forms of filter media cleaning such as backwashing and chemical cleaning to ensure that the filter media is thoroughly cleaned and free of contaminants.

Learn More About compressed air

https://brainly.com/question/31042908

#SPJ11

The false statement is: the rate laws of all chemical reactions can be determined directly from their net chemical equations.

This is because not all chemical reactions follow a simple stoichiometry and may involve multiple intermediate steps and complex mechanisms. However, elementary reaction rate laws can be determined directly from their chemical equations, and the rate laws of termolecular elementary reactions are third order overall, while the rate laws of unimolecular elementary reactions are first order overall.

The false statement among the given options is: The rate laws of all chemical reactions can be determined directly from their net chemical equations. This is because the rate law is determined experimentally and cannot be derived solely from the net chemical equation. The other statements regarding elementary reaction rate laws and order for termolecular and unimolecular reactions are true.

To know more about chemical click here

brainly.com/question/25931113

#SPJ11

The first emission standards for automobiles dealt with the emission of hydrocarbons. These are organic compounds that contain only hydrogen and carbon atoms and are major components of gasoline and other fossil fuels used in vehicles. The correct alternative is d. hydrocarbons.

Here are some additional points on the other options:

Learn More About hydrocarbons

https://brainly.com/question/29318707

#SPJ11

Methyl orange is the least desirable residual test for chlorine. Hence, option b is correct.

Methyl orange is a titration indicator dye that changes color when an acid or base is present. Due to the existence of additional oxidizing agents or pollutants that could react with the indicator, the test is not specific for detecting chlorine residue and may produce erroneous findings.

SNORT, OTA, and DPD are more accurate and trustworthy ways to measure chlorine residual in water than the other residual assays. OTA is a colorimetric method that measures total chlorine residual, SNORT is a visual indicator that changes color in the presence of chlorine, and DPD is a frequently used test that evaluates free and mixed chlorine residual.

To know more about residual test, visit,

https://brainly.com/question/16936855

#SPJ4

To find the mass of 3.00 moles of ethanol, we can use the formula: mass = moles x molar mass mass = 3.00 moles x 46.07 g/mol mass = 138.21 g Therefore, the answer is B) 138 g.

To find the mass of 3.00 moles of ethanol (C2H6O), you need to first calculate the molar mass of ethanol and then multiply it by the given number of moles.

Step 1: Determine the molar mass of ethanol (C2H6O).
- Carbon (C): 12.01 g/mol
- Hydrogen (H): 1.01 g/mol
- Oxygen (O): 16.00 g/mol

Ethanol (C2H6O) has 2 carbon atoms, 6 hydrogen atoms, and 1 oxygen atom:
(2 × 12.01 g/mol) + (6 × 1.01 g/mol) + (1 × 16.00 g/mol) = 24.02 + 6.06 + 16.00 = 46.08 g/mol

Step 2: Multiply the molar mass by the given number of moles:
3.00 moles × 46.08 g/mol = 138.24 g

The mass of 3.00 moles of ethanol is approximately 138 g, so the correct answer is B) 138 g.

to learn more about molar mass click here:

brainly.com/question/19755698

#SPJ11

we have 0.755 mol of O atoms in 25.7 g of CaSO₄. The correct answer is option B) 0.755 mol.

To determine the number of moles of O atoms in 25.7 g of CaSO₄, we need to first find the molar mass of CaSO₄ and then use the given mass to calculate the moles of the compound. Finally, we will find the moles of O atoms within the compound.
The molar mass of CaSO₄ can be found by adding the molar masses of its constituent elements: Ca, S, and O. The molar masses are as follows:
Ca = 40.08 g/mol
S = 32.07 g/mol
O = 16.00 g/mol
The formula of CaSO₄ contains one Ca atom, one S atom, and four O atoms. Therefore, the molar mass of CaSO₄ is:
(1 × 40.08) + (1 × 32.07) + (4 × 16.00) = 40.08 + 32.07 + 64.00 = 136.15 g/mol
Now we can find the moles of CaSO₄ in 25.7 g:
moles of CaSO₄ = (mass of CaSO₄) / (molar mass of CaSO₄) = 25.7 g / 136.15 g/mol = 0.1887 mol
Since there are 4 moles of O atoms in each mole of CaSO₄, we can now calculate the moles of O atoms:
moles of O atoms = (moles of CaSO₄) × (4 moles of O atoms per mole of CaSO₄) = 0.1887 mol × 4 = 0.7548 mol
Rounded to three significant figures, we have 0.755 mol of O atoms in 25.7 g of CaSO₄. The correct answer is option B) 0.755 mol.

learn more about atoms here

https://brainly.com/question/30898688

#SPJ11

Answer:

The molar mass of silver nitrate is 169.87 g/mol.

Hope it helped! :)

HTH dry powder chlorine is set at 65% purity. So, the correct answer is c.) 65%.

To maintain your pool clean, clear, and prepared for summertime enjoyment, it sanitises, manages algae, clarifies, softens pool water, even prevents stain and scale. sanitizer and shock therapy combined. eliminates algae and germs. softens, clarifies, and guards against scale and stains. Water that is clearly flashing blue in 24 hours. HTH is a potent chlorinating agent with a chlorine concentration of more than 30%. This substance is frequently used to disinfect swimming pools. Hence, HTH dry powder chlorine is set at 65% purity. So, the correct answer is c.) 65%.

To know more about chlorine click here:

https://brainly.com/question/13123721

#SPJ11

Increasing the concentration of the substrate can also increase the rate of carbocation formation and subsequently the rate of the Sn1 reaction.

To help carbocation formation and increase the rate of an Sn1 reaction, consider the following factors:
1. Substrate structure: More substituted carbocations (3° > 2° > 1°) are more stable, and their formation is favored. This stability increases the rate of an Sn1 reaction.
2. Leaving group: A good leaving group (one that is stable when it departs) increases the likelihood of carbocation formation and the rate of an Sn1 reaction.
3. Solvent: Polar protic solvents stabilize carbocations through solvation, which can help in carbocation formation and increase the Sn1 reaction rate.
4. Temperature: Increasing temperature can help overcome the energy barrier for carbocation formation, resulting in a faster Sn1 reaction rate.
By optimizing these factors, you can promote carbocation formation and increase the rate of an Sn1 reaction.

learn more about carbocation Refer: https://brainly.com/question/31538109

#SPJ11

The half life for a first order reaction is 27 min. For 4 half lives to occur it will take 108 mins. The correct option is (b)

The order of reaction describes  the relationship between the rate of a chemical reaction and the concentration of all the species participating in the reaction.  Reaction order gives information about the number of reacting species whose concentration affects the reaction rate. It is obtained by adding all the exponents of the concentration in the rate equation. The value of order of a reaction can beany  integer or a fraction. It can also have a value  zero.

Half life of a reaction is defined as the time required for completion of half of the reaction or 50% of the reaction. The expression for half life of a second order reaction is 0.693/k

According to question, for 1 half life it takes 27 mins

So, for 4 half life it will take 27× 4= 108 mins.

Thus, option (b) is correct.

To know more about half life here

https://brainly.com/question/19369788

#SPJ4

Assuming the solution of ascorbic acid and vinegar have the same pH, I would predict that ascorbic acid would be more effective in preventing browning.

The reason for this is because ascorbic acid, also known as vitamin C, is an antioxidant that can directly react with the compounds responsible for browning (such as polyphenols) and neutralize them, thereby preventing the browning process. While vinegar is an acid that can help lower the pH of the solution, making it less favorable for browning reactions to occur, it does not have the same antioxidant properties as ascorbic acid, which allows it to directly inhibit the browning process.

Learn more about ascorbic acid here:

brainly.com/question/15297660

#SPJ11

a. True. Sodium fluoroacetate, also known as "1080," is indeed the most effective fast-acting rodenticide Rodenticide Act available for use throughout the United States.

The Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) of 1947 is the law that governs the use of pesticides and herbicides in the USA. Certain substances are not allowed to be used as pesticides under this law.

A proper federal regulatory framework for the use, distribution, and sale of pesticides is provided by the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) statute.

The purpose of this law (FIFRA) is to safeguard those who use pesticides, consumers, and the environment.

The US Environmental Protection Agency (EPA) is required to grant licences for the use of pesticides throughout the country.

To assure the safety and efficacy of all pesticides used in the US, the EPA reviews and registers them in accordance with FIFRA. The organisation also controls the use, handling, and disposal of pesticides and performs routine inspections to make sure they remain safe.

If someone or a business violates FIFRA rules, the EPA has the authority to file a lawsuit and, if necessary, revoke or suspend pesticide registrations.

Learn more about Rodenticide Act here

https://brainly.com/question/25780629

#SPJ11

C: Percentage -268 mol, mole ratio = 1.5 and whole number = 3

H: Percentage = 4.46 mol, mole ratio = 2.5 and whole number = 5

Cl: Percentage = 1.79 mol, mole ratio = 2 and whole number = 2

Therefore, The molecular formula is C3H5Cl2, so the correct answer is (C).

To find the molecular formula for the compound, we first need to determine the empirical formula.

We can assume that we have 100 grams of the compound, so we can convert the percentages to grams:
- 32.18 g C
- 4.50 g H
- 63.32 g Cl

Next, we can convert these masses to moles by dividing by their respective atomic/molecular masses:
- Moles of C: 32.18 g / 12.01 g/mol = 2.68 mol
- Moles of H: 4.50 g / 1.01 g/mol = 4.46 mol
- Moles of Cl: 63.32 g / 35.45 g/mol = 1.78 mol

We can divide each of these mole values by the smallest mole value to get a set of whole-number ratios:
- C: 2.68 mol / 1.78 mol = 1.50
- H: 4.46 mol / 1.78 mol = 2.50
- Cl: 1.78 mol / 1.78 mol = 1.00

These ratios can be rounded to the nearest whole number to give us the empirical formula: C1.5H2.5Cl1
To find the molecular formula, we need to determine the "n" value that will give us a molecular mass close to the given molar mass of 223.94 g/mol.

The empirical formula has a mass of approximately:
- (1.5 x 12.01 g/mol) + (2.5 x 1.01 g/mol) + (1 x 35.45 g/mol) = 56.53 g/mol

To determine "n", we can divide the molar mass by the empirical formula mass:
- n = 223.94 g/mol / 56.53 g/mol = 3.96

Rounding this to the nearest whole number gives us a value of 4, so the molecular formula is:
- (C1.5H2.5Cl1)4 = C6H10Cl4

Therefore, the answer is B) C6H10Cl4.

Learn more about the mole ratio:

brainly.com/question/15288923

#SPJ11

The correct answer is E) 162.23 amu. The molecular mass of nicotine, [tex]C_{10} H_{14} N_{2}[/tex] can be calculated by adding the atomic masses of all its constituent atoms:

(10 x atomic mass of C) + (14 x atomic mass of H) + (2 x atomic mass of N)

= (10 x 12.011) + (14 x 1.008) + (2 x 14.007)

= 162.23 amu

The molecular mass of a compound is the sum of the atomic masses of all the atoms in a molecule. In the case of nicotine, its molecular mass is calculated by adding the atomic masses of each of its atoms, which are as follows:

10 carbon atoms: 10 x 12.01 amu = 120.1 amu

14 hydrogen atoms: 14 x 1.01 amu = 14.14 amu

2 nitrogen atoms: 2 x 14.01 amu = 28.02 amu

Therefore, the molecular mass of nicotine ([tex]C_{10} H_{14} N_{2}[/tex]) is:

Molecular mass = 120.1 amu + 14.14 amu + 28.02 amu = 162.26 amu (rounded to two decimal places)

To know more about atoms

brainly.com/question/1566330

#SPJ11

The concentration of [OH-] = 3.16*[tex]10^{-11}[/tex]M.

The amount of solute contained in a specific amount of solution is the substance's concentration. The number of moles of solute in 1 L of solution, or molarity, is used to express concentrations.

In chemistry, a solution is a homogeneous mixture of two or more compounds in their relative proportions. The composition of the solution can be continually changed up to the solubility limit. Although solutions of gases and solids are possible, the term "solution" is most frequently used to refer to the liquid condition of matter.

according to question:

[H+] *[OH-] = 1*[tex]10^{-14}[/tex]

If [H+] = 3.16*[tex]10^{4}[/tex]

then [OH-] = (1*[tex]10^{-14}[/tex]) / ( 3.16*[tex]10^{-4}[/tex])

[OH-] = 3.16*[tex]10^-11[/tex] M

To know more about concentration visit:

https://brainly.com/question/10725862

#SPJ1

The total surface area of the irregularly shaped metal part is approximately 1224.78 cm².

To determine the total surface area of the irregularly shaped metal part, we need to first find the mass of zinc deposited, then use the volume and density to find the surface area.

The amount of zinc deposited can be calculated using Faraday's Law of Electrolysis:

m = (I × t × M) / (n × F)

where m is the mass of zinc deposited, I is the current (2.599 A), t is the time (1 hour = 3600 s), M is the molar mass of zinc (65.38 g/mol), n is the number of electrons involved in the redox reaction (for Zn, n = 2), and F is the Faraday constant (96485 C/mol).

m = (2.599 A × 3600 s × 65.38 g/mol) / (2 × 96485 C/mol) = 9.833 g

Now we can find the volume of zinc deposited:

V = m / ρ = 9.833 g / 7.140 g/cm³ = 1.376 cm³

We know the thickness of the zinc layer is 0.01123 mm, which is equivalent to 0.001123 cm. To find the surface area (A), we can use the formula:

A = V / thickness = 1.376 cm³ / 0.001123 cm = 1224.78 cm²

So, the total surface area of the irregularly shaped metal part is approximately 1224.78 cm².

Visit here to learn more about  molar mass : https://brainly.com/question/12127540
#SPJ11

When starting with a chiral alkyl halide, the products of a substitution reaction can be either achiral or chiral, depending on the reaction mechanism and the stereochemistry of the nucleophile.

In an SN1 reaction, the nucleophile attacks the carbocation intermediate from either side with equal probability, resulting in a racemic mixture of both R and S enantiomers.

In contrast, in an SN2 reaction, the nucleophile approaches the alkyl halide from the opposite side of the leaving group, resulting in an inversion of stereochemistry at the chiral center. This means that the product will be the opposite enantiomer of the starting material, resulting in a chiral product.

However, if the nucleophile used in the SN2 reaction is achiral, such as a hydroxide ion, the product will be racemic, as the reaction can occur with equal probability on both sides of the molecule.

In summary, the products of a substitution reaction starting with a chiral alkyl halide can be either achiral or chiral, depending on the reaction mechanism and the stereochemistry of the nucleophile.

To know more about nucleophile

brainly.com/question/28325919

#SPJ11

The correct expression for the deltaG'o for the transition observed in the experiments described in the passage is ΔG° = -RT ln(K).

In order to provide an accurate answer, I would need more information about the specific passage and experiments being referred to. However, I can provide a general answer about ΔG° (standard Gibbs free energy change) in relation to a transition observed in experiments.

The correct expression for the standard Gibbs free energy change (ΔG°) in a transition observed in experiments is:

ΔG° = -RT ln(K)

where:
- ΔG° is the standard Gibbs free energy change
- R is the gas constant (8.314 J/mol·K)
- T is the temperature in Kelvin
- K is the equilibrium constant for the reaction

This equation allows you to calculate the standard Gibbs free energy change for a transition observed in experiments, provided you have the required information.

Know more about Gibbs free energy  here:

https://brainly.com/question/22697457

#SPJ11

1.945 x 10²⁴ molecules make up 3.23 moles.

In the case of sodium chloride, Sodium chloride, there are Avogadro's number of formula units for each mole of Sodium chloride (molecules). So, the number of Sodium chloride formula units (molecules) we need to determine is equal to the number of movements times all of the data we have is constant.

To convert from moles to molecules, you need to use Avogadro's number, which is 6.022 x 10²³ molecules per mole.

So, to convert 3.23 mol to molecules:

3.23 mol x 6.022 x 10²³ molecules/mol = 1.945 x 10²⁴ molecules.

To know more about molecules visit:-

https://brainly.com/question/15123235

#SPJ1

There are 12.00 grams of Al(NO₃)₃ in 0.089 L of a 0.63 M solution of Al(NO₃)₃.

The number of moles is a unit used to measure the amount of a substance, defined as the amount of a substance that contains as many elementary entities (such as atoms, molecules, or ions) as there are atoms in 12 grams of carbon-12. One mole of a substance contains Avogadro's number of entities, which is approximately 6.022 × 10^23 particles.

The number of moles can be calculated by dividing the mass of a substance by its molar mass or by dividing the amount of substance (in units of molecules, atoms or ions) by Avogadro's number.

To calculate the amount of Al(NO₃)₃ in grams present in 0.089 L of a 0.63 M solution of Al(NO₃)₃, we can use the formula:

mass = molarity × volume × molar mass

where:

molarity is the concentration of the solution in moles per liter (M)

volume is the volume of the solution in liters (L)

molar mass is the mass of one mole of the compound in grams per mole (g/mol)

First, let's calculate the number of moles of Al(NO₃)₃ present in 0.089 L of the solution:

moles = molarity × volume = 0.63 M × 0.089 L = 0.05607 mol

The molar mass of Al(NO₃)₃ is:

Al(NO₃)₃ = Al + 3(NO₃) = 1(26.98 g/mol) + 3(63.01 g/mol) = 213.97 g/mol

Now we can use the formula to calculate the mass of Al(NO₃)₃:

mass = moles × molar mass = 0.05607 mol × 213.97 g/mol = 12.00 g

Therefore, there are 12.00 grams of Al(NO₃)₃ in 0.089 L of a 0.63 M solution of Al(NO₃)₃.

Learn more about moles here:

https://brainly.com/question/26416088

#SPJ1

To determine the number of moles of Cl atoms in 65.2 g CHCl₃, we first need to calculate the molar mass of CHCl3:

Molar mass of CHCl₃ = (1 x 12.01 g/mol) + (1 x 1.01 g/mol) + (3 x 35.45 g/mol)

= 119.38 g/mol

Next, we need to determine the number of moles of CHCl₃:

n = m/M = 65.2 g/119.38 g/mol = 0.5467 mol

Finally, we can calculate the number of moles of Cl atoms by multiplying the number of moles of CHCl3 by the number of Cl atoms in each molecule of CHCl₃ (which is 1):

n(Cl) = 0.5467 mol x 1 = 0.5467 mol

Therefore, there are 0.5467 moles of Cl atoms in 65.2 g CHCl₃. Rounded to three significant figures, the answer is A) 0.548 mol.

Learn more about  molar mass here:

https://brainly.com/question/22997914

#SPJ11