Explanation:
First we have to descompose velocity, and get Velocity of X and Y side:
Vx = V * cos 30°
Vx = 3 m/s * 0,866...
Vx = 2,598 m/s
Vy = V * sen 30°
Vy = 3 m/s * 0,5
Vy = 1,5 m/s
Lets calculate time of fly:
Firat, lets calulate up time:
uT = (Fv - Iv) / g
uT = (0 m/s - 1,5 m/s) / -9,8 m/s^2
uT = -1,5 m/s / -9,8 m/s^2
uT = 0,15 s
Like up time is equal to down time, time of fly will be:
T =uT + dT
T = 0,15 s + 0,15 s
T = 0,3 s
Now for calculate how far will reach, lets aplicate the formula:
d = Vx * T
d = 2,598 m/s * 0,3 s
d = 0,779 meters
Will reach 0,779 meters
Gud luck
What is the speed in kilometers per hour of a 27.78m/s baseball pitch?
Answer:
100.008 km/h
Explanation:
multiply the speed value by 3.6
You are traveling down the highway when you notice a cop 200 meters ahead of you. For the next 5 seconds, you step on the bake to avoid a speeding ticket. The brake causes an acceleration on your car of -2.0 m/s^2.
What is the time it takes?
What is the displacement of your car?
What is the acceleration of your car?
Write the equation you will use to solve the problem.
What was your initial velocity?
Answer:200 5 -20 = v=323
Explanation:
OC wykonuje około 112 pełnych wahnięć skrzydłami w ciągu jednej sekundy Zaznacz poprawne dokończenie zdania okres drgań skrzydeł osy wynosi około a 112 sekund b 112 h z c9n s d 0,009 h l z
Answer:
T = 0.009 s
Explanation:
It is given that, an OC makes about 112 full wing swings in one second. We need to find the oscillation period of the wasp's wings.
No of oscillations per unit time is called the frequency of an object. It means 112 is the frequency of wing swings. Let T is the oscillation period. It is equal to the reciprocal of frequency as follows :
[tex]T=\dfrac{1}{f}\\\\T=\dfrac{1}{112}\\\\= 0.00892\ s\\\\=0.009\ s[/tex]
Hence, the oscillation period is 0.009 s.
i would appreciate it if u would answer
Answer:
A) Kinetic energy and gravitational energy
Explanation:
The blimp has kinetic energy, because it is moving. When it circles the event, it gains and uses kinetic energy. It also has potential energy because it has the potential to go a lot faster, and because it has so much stored energy and pressure.
Hope this helps!
how does an air pump work
Answer:
When the piston is pulled up, air gets sucked into the pump through the inlet. The pump chamber depressurizes as it fills with air. When the piston is forced down, the air becomes compressed and closes the inlet. Then the air flows out from the outlet
A) 750gm
11. Ifa rectangular solid box of aluminum is heated, which of the following is not true?
A) Its mass remains constant
Cits density increase
B) Its volume increase
Do none of the above
Given :
A rectangular solid box of aluminum is heated.
To Find :
Which of the following is not true.
A) Its mass remains constant
C) its density increase
B) Its volume increase
D) none of the above
Solution :
We know, when an object is heated it expands.
Objects expands means that the volume increases but mass remains same by conservation of mass.
Since mass remains constant and volume increases.
So, density will decrease.
Hence, this is the required solution.
What is the mass of an object that has a force of 89 n and an acceleration of 25 m/s2
Answer:
3.56g
Explanation:
You would use the formula F= ma
F= 89N
A= 25m/s^2
M=?
89= 25*m
6. Another engine reaches its top speed from rest in 7.5 s. It is able to perform 250,000 J of wok in
that time How much power does this engine have in that time?
Answer:
0.8N
Explanation:
your welcome:)
What is the difference between m/s and m.s.
Answer
m/s rate of change of dispalcement per sec. ie velocity
m/s^2 is (m/s)/s ie rate of change of velocity per sec. ie accelerationplanation:
Answer:
Hi there. I hope your having an amazing day. Here is the answer to you question. Give me brainlest please!
Explanation:
m/s rate of change of displacement per sec. ie velocity
m/s^2 is (m/s)/s ie rate of change of velocity per sec. ie acceleration plantation
I WILL MARK BRAINLIEST!!ASAP!!! Wet Lab - Coulomb's Law lab from edge!!
Answer:
idek to be honest
Explanation:
I WILL MARK BRAINLIEST!!ASAP!!! Wet Lab - Coulomb's Law lab from edge!!
Answer: nah
Explanation:
A wet lab experiment for Coulomb's law involves measuring the force between charged objects immersed in a liquid. The experiment is called a "wet" lab because it involves liquid or aqueous solutions.
What is Coulomb's law?Coulomb's law is an equation that describes the electrostatic force between two charged particles.
It states that "the force is directly proportional to the product of the charges and inversely proportional to the square of the distance between them."
The equation is given by:
F = k×(q₁ × q₂) / r²
Where
F = the electrostatic force,
k =Coulomb's constant,
q₁ and q₂= the charges of the particles,
r =the distance between the.
In this question,
In the experiment, two conductive objects are charged with opposite charges using a high-voltage power supply, which can be controlled to vary the magnitude of the charges.
The two objects are then immersed in a non-conductive liquid, such as oil or water, and positioned a fixed distance apart.
Using a force sensor or a balance, the force between the two objects is measured as they move toward each other. By measuring the force at different distances, the experiment can verify Coulomb's law, which predicts that the force between two charged objects is proportional to the product of their charges and inversely proportional to the square of their separation distance.
The experiment can be performed with different pairs of charged objects with different magnitudes of charge and separation distances, allowing the relationship between the force and these variables to be investigated. This provides insight into the electrostatic interaction between charged objects in a liquid, which has applications in various fields, including electrochemistry, material science, and biophysics.
Therefore, in a wet lab experiment on Coulomb's law, we have to immerse the apparatus in aqueous solutions.
To learn more about Coulomb's law click:
https://brainly.com/question/506926
#SPJ7
Inside a car that was at 273 K, a bottle with a pressure at 100,000 pascals warms up to 350 K. If the volume of the bottle remains constant, what is the pressure, in pascals, inside the hot water bottle!
Answer:
128.205.1
Explanation:
Which quantities define momentum?
Answer:
velocity and mass
Explanation:
:) apek
What is the final speed of an object that starts from rest and accelerates uniformly at 3.0 meters per second2 over a distance of 6.0 meters? (1) 8.0 m/s (2) 6 m/s (3) 16 m/s (4) 64 m/s
Answer:
16 m/s sir
Explanation:
because i am in collage
is it true that scientific theories and scientific laws both describe observed events??? provide evidence!!!!! only 2 people could answer so if you can't then comment and provide evidence thank you very much!!!!!!
Answer:
I'm not positive but I think the answer is Yes, because both scientific laws and theories are based on evidence.
Explanation:
Sorry I don't have notes on this, hope this helps! :)
A car initially traveling at 25 m/s speeds up to 60 m/s under a uniform acceleration of 5.0 m/s2 to avoid being hit by another car. How long does it take the car to speed up and get out of the way? Show your work.
Answer:
The car takes 7 seconds to speed up and get out of the way
Explanation:
Constant Acceleration Motion
It's a type of motion in which the velocity of an object changes uniformly over time.
Having a as the constant acceleration, vo the initial speed, vf the final speed, and t the time, the following relation applies:
v_f=v_o+at
Using the above equation we can solve for t:
[tex]\displaystyle t=\frac{v_f-v_o}{a}[/tex]
The car has an initial speed of vo=25 m/s and ends up at vf=60 m/s with an acceleration of a=5 [tex]m/s^2[/tex].
Given all the appropriate data, calculate t:
[tex]\displaystyle t=\frac{60-25}{5}[/tex]
Calculating:
[tex]\displaystyle t=\frac{35}{5}[/tex]
t = 7 seconds
The car takes 7 seconds to speed up and get out of the way
A whale travels 112 meters at 14 m/s How long does this take?
Answer:
8
Explanation:
112meters divided by 14
An electric heater takes 1.2kwh in 30min at 120V having an efficiency of 99%.The heat energy required boil a certain amount of water is 99KJ.If the current taken by heater is 20 amp at 120V.Find the time required to boil water?
Answer:
Explanation:
Power of the heater = P watt .
P x .5 = 1200
P = 2400 W
If resistance of heater R
V² / R = 2400
120²/ R = 2400
R = 6 ohm .
heat to be produced = 99000 J
Current be I
I²R t x .99 = 99000
20² x 6 x t x .99 = 99000
t = 41.67 s
Which of the following describes the acceleration of an object with constant velocity?
a) Negative acceleration
b) Positive acceleration
c) Not enough acceleration to tell
d) No acceleration
How did Robert Whittaker change classification?
He created an organizational hierarchy.
He classified organisms as plants or animals.
He added the Phylum and Family levels.
He reorganized life into five kingdoms.
Answer:
d
Explanation:
I need help on this question
Answer:
at rest because time is passing and speed is still at 0
Explanation:
Plz help plllzzzzzzzz
Una barra de hierro cuya longitud inicial es de 2m se le incrementa su temperatura de 20 °C a 120 °C ¿Cuál es la longitud final de la barra? (considera que el coeficiente de dilatación del hierro) es 1,2 x 10-5 1/°C ( 3 puntos)
Answer:
1.9976 m
Explanation:
An iron bar whose initial length is 2m has its temperature increased from 20 ° C to 120 ° C. What is the final length of the bar? (consider that the coefficient of expansion of iron) is 1.2 x 10-5 1 / ° C (3 points)
Given that,
Initial length of an iron bar, [tex]L_0=2\ m[/tex]
The temperature increased from 20°C to 120°C
The coefficient of expansion of iron is [tex]1.2\times 10^{-5}\ /^{\circ} C[/tex]
We need to find the final length of the bar.
The linear expansion equation is given by :
[tex]\Delta L=\alpha L\Delta T[/tex]
Where [tex]\Delta L[/tex] is the change in length
[tex]\Delta L=1.2\times 10^{-5}\times 2\times (120-20)\\\\=0.0024\ m[/tex]
Also, [tex]\Delta L = L_o-L[/tex]
L is final length
[tex]0.0024= 2-L\\\\L=2-0.0024\\\\=1.9976\ m[/tex]
So, the final length of the bar is 1.9976 m
What is the potential energy of a rock that weighs 10.0 kg and is sitting on top of a hill 300 meters high?
The potential energy of a rock that weighs 10.0 kg and is sitting on top of a hill 300 meters high is 29400J
POTENTIAL ENERGY:
Potential energy refers to the energy due to the position of an object. It can be calculated by using the following formula:P.E = m.g.h
Where;
m = mass of the rock
g = gravitational force of Earth (9.8m/s²)
h = height (m)
According to this question, a rock weighs 10.0 kg and is sitting on top of a hill 300 meters high. The potential energy can be calculated as follows:P.E = 10 × 9.8 × 300
P.E = 29400J
Therefore, the potential energy of a rock that weighs 10.0 kg and is sitting on top of a hill 300 meters high is 29400J.Learn more: https://brainly.com/question/15613166?referrer=searchResults
I will mark brainliest if right :)
Which features do sound waves have that ocean and light waves do not? Check all that apply.
compressions
rarefactions
amplitude
wavelength
crests
frequency
speed
(I know one is compressions but I can't figure out the others and i don't want to get it wrong, please help!!)
Answer:
Explanation:
compressions and rarefactions
Answer:
Compressions
-and-
Rarefactions
Explanation:
Question 2 of 10
Which of the following careers would physicists be least qualified to perform,
based on their training?
A. Nuclear engineer
B. Solar panel designer
C. Research lab manager
D. Gardener
Answer:
a and d
Explanation:
a because a nuclear engineer is more on explosions which links to chemistry and d because Gardner is irrelevant
Four examples of second class levers
Answer:
they are :
Explanation:
wheelbarrow bottle opener an oarWhich statements accurately describe matter
different between si unit and derived unit
Answer:
There are seven base SI units corresponding to different parameters and are considered independent of each other. Derived units are derived from these 7 base units. Derived units are dependent on the base units and are not independent of each other. For example, let us derive the SI units for force. By Newtons Second Law of Motion, the force is same as the product of mass and acceleration of a body. that is, force = mass x acceleration. Also, acceleration is defined as the rate of change of velocity. And velocity is defined as the rate of change of displacement. Thus, force = mass x acceleration = mass x dv/dt = mass x dt2 Mass has SI units of kg, distance is measured in m and t has the SI unit of second. Thus, Sl unit of force is kg.m/s^2 (also known as Newton).
PLS HELP ME THIS IS DUE TONIGHT
By listening for it underwater, using SONAR.
Hope this helped!