Charlie jumped a distance of 81/feet. His younger 1 brother jumped a distance of 35/L feet and then jumped 21 feet Who jumped farther? How much farther? Explain how you found your answer.

We can say with 82% confidence that the true difference in mean times for left-handed and right-handed people is between -0.978 s and -0.222 s and t-distribution is used.

To calculate the certainty interim for the contrast between left-handed and right-handed individuals, we are able to utilize the taking-after equation:

CI = (x1 - x2) ± t*SE 

where:

x1 = the meantime for left-handed people

x2 = the meantime for right-handed people

t = the critical value for the t-distribution with n1+n2-2 degrees of freedom and the desired confidence level (in this case, 82%)

SE = the standard error of the difference in means, which is calculated as:

[tex]SE = sqrt((s1^2/n1) + (s2^2/n2))[/tex]

where:

s1 = the standard deviation for left-handed people

s2 = the standard deviation for right-handed people

n1 = the sample size for left-handed people

n2 = the sample size for right-handed people

Plugging in the given values, we get:

x1 - x2 = 1.1 - 1.7 = -0.6

s1 = 0.4

s2 = 1.4

n1 = 47

n2 = 42

[tex]SE = sqrt((0.4^2/47) + (1.4^2/42)) = 0.261[/tex]

To find the critical value for the t-distribution, we can use a t-table or a calculator. With n1+n2-2 = 87 degrees of freedom and an 82% confidence level, the critical value is approximately 1.360.

Thus, the 82% confidence interval for the difference in left-handed or right-handed people is:

CI = (-0.6) ± (1.360*0.261) = (-0.978, -0.222)

hence, we can say with 82% confidence that the true difference in mean times for left-handed and right-handed people is between -0.978 s and -0.222 s.

Note that we used the t-distribution because the sample sizes for both groups are relatively small (n1 = 47, n2 = 42).

learn more about t-distribution

brainly.com/question/13574945

#SPJ4

Using percentages we know that Terrel has the best free throw statistics which is 70.83%.

In mathematics, a quantity or ratio known as A% stands for a percentage of 100.

There are several different ways to depict a dimensionless connection between two numbers, including ratios, fractions, and decimals.

To represent percentages, the symbol "%" is typically written after the number.

In mathematics, a percentage is a number or ratio that is expressed as a fraction of 100.

So, in the given situation where we need to get whose statistics are the best.

We need to calculate the percentages in all cases as follows:

Jack: 18/39*100 = 46.15%

Henry: 54%

Terrel: 17/24*100 = 70.83%

Riley: 9/23*100 = 39.13%

Since Terrel has the highest %, so he has the best free throw statistics.

Therefore, using percentages we know that Terrel has the best free throw statistics which is 70.83%.

Know more about the percentage here:

https://brainly.com/question/24877689

#SPJ1

3/4

If she ate part of the large cookie and was left with 1/4 of the cookie, that means only 3/4 of the cookie is left.

The highest point of a normal curve, also known as a Gaussian distribution or bell curve, always occurs at the mean. This is because the normal curve is symmetrical around the mean, with the same number of values on either side of the mean. Therefore, the peak of the curve must be directly above the mean.

The standard deviation is a measure of how spread out the values in a distribution are. For a normal distribution, approximately 68% of the values fall within one standard deviation of the mean, 95% fall within two standard deviations of the mean, and 99.7% fall within three standard deviations of the mean. Therefore, while the highest point of the normal curve occurs at the mean, the curve does extend out to both sides of the mean, with the height of the curve gradually decreasing as the distance from the mean increases.

Specifically, the point at which the curve begins to flatten out on either side of the peak is approximately one standard deviation away from the mean. At two standard deviations away from the mean, the curve has flattened out significantly, and at three standard deviations away from the mean, the curve is almost entirely flat. This is known as the empirical rule, or the 68-95-99.7 rule.

Understanding the normal curve and its characteristics is important in statistics and data analysis, as many real-world phenomena can be approximated using a normal distribution. By knowing the mean and standard deviation of a distribution, we can make predictions about the likelihood of various outcomes occurring.

for such more question on mean

https://brainly.com/question/14532771

#SPJ11

Answer:

1,760m

Step-by-step explanation:

The side of the smaller triangle is multiplied by 4, which got 44 in the bigger triangle. So you would multiply the base of the smaller by 4 as well, resulting in 80. Now you need to multiply the base and the side of the triangle, and divide that answer by half.

FORMULA FOR A TRIANGLE:

A= 1/2( L x W )

A= 1/2 (44 x 80)

A= 1/2 (3520)

A= 1760

Therefore, the area of the shaded triangle is 1,760m.

SORRY IF THIS DID NOT MAKE SENSE!

The reason is 2) Vertical Angles Theorem.

Given is figure in which two triangles are joined,

We need to complete the proof of ΔBCA ≅ ΔDCE,

So,

BC = DC, AC = EC [given]

∠BCA = ∠DCE [Vertical Angles Theorem]

ΔBCA ≅ ΔDCE by SAS rule,

Hence, the reason is 2) Vertical Angles Theorem.

Learn more about Vertical Angles Theorem click;

https://brainly.com/question/18868430

#SPJ1

Step-by-step explanation:

oh you have to do is that you have to see 15 / 18 ft * 15 / 1

Joseph must score at least 32 on exam B to do equivalently well as he did on exam A.

To determine how well Joseph must score on exam B in order to do equivalently well as he did on exam A, we need to find the equivalent z-score for his exam A score and then use it to find the corresponding score on exam B.

First, we find the z-score for Joseph's exam A score:

z = (x - mu) / sigma

z = (516 - 600) / 40

z = -2.1

The z-score of -2.1 indicates that Joseph's exam A score is 2.1 standard deviations below the mean.

To find the equivalent score on exam B, we use the formula:

z = (x - mu) / sigma

Solving for x, we get:

x = z * sigma + mu

x = -2.1 * 20 + 76

x = 32

To learn more about standard deviations visit:

brainly.com/question/23907081

#SPJ11

The option (3) is correct the quotient is −5x³ + x + 3.

To solve quadratic equations by factoring, we first express the quadratic polynomial into a product of factors by using middle term splitting or different identities and then set each factor equal to 0. The equation a x 2 + b x + c = 0 ( a ≠ 0 ) can be written as.

According to given question

To divide[tex]15x^5[/tex] − 3x³ − 9x² by −3x² using the factorization method, we can factor out −3x² from the expression and simplify to get:

[tex]15x^5[/tex]− 3x³ − 9x²= −3x²(−5x³ + x + 3)

Therefore, the quotient is −5x³ + x + 3.

Learn more about Quadratic polynomial here

https://brainly.com/question/17489661

#SPJ1

Answer:

A 48 pound catfish would be approximately 45 inches long

Step-by-step explanation:

First find the slope of the line, m, using 2 points on the line, (20, 3) and (25, 12)

m = (12-3) / (25-20) = 9/5

Use the point (30, 21) and slope to find the equation (in point-slope form) of the line:

(y - 21) = 9/5(x - 30) = 9/5x - 270/5 = 9/5x - 54

y = 9/5x - 54 + 21 = 9/5x - 33

y = 9/5x - 33      now you have the equation of the line in y = mx + b form

Find x (catfish length) when y = 48 (catfish weight)

48 = 9/5x - 33

9/5x = 48 + 33 = 81

x = 81 · 5/9 = 45

x = 45 inches

The width of the parking lot in the drawing is 16 centimeters

Gabby made a scale drawing of the town library. She used the scale 1 centimeter : 5 meters. The actual width of the parking lot is 80 meters.

If the scale is 1 centimeter : 5 meters, then 1 centimeter on the drawing represents 5 meters in real life.

To find the width of the parking lot in the drawing, we need to set up a proportion

1 cm : 5 m = x cm : 80 m

Where x is the width of the parking lot in the drawing.

To solve for x, we can cross-multiply and simplify

1 cm * 80 m = 5 m * x cm

80 cm = 5x

x = 16 cm

Therefore, the width of the parking lot in the drawing is 16 centimeters.

To know more about width here

https://brainly.com/question/20927746

#SPJ1

The polar form of the rectangular coordinates (-3√3, 0) is r = 3√3 and θ = 0

To convert the rectangular coordinates (-3√3, 0) into polar form, we can use the following equations:

r = √(x² + y²)

θ = tan⁻¹(y/x)

In this case, x = -3√3 and y = 0, so we have:

r = √((-3√3)² + 0²) = 3√3

θ = tan⁻¹(0/(-3√3)) = tan⁻¹(0) = 0

Since the angle is given in radians over the interval 0 ≤ θ < 2π (which is equivalent to 0 ≤ θ < 6.28318), we need to add 2π to θ if it is negative, to ensure that θ is in the specified interval.

However, in this case, θ is already equal to 0, which is within the specified interval.

Therefore, the polar form of the rectangular coordinates (-3√3, 0) is:

r = 3√3

θ = 0 (in radians, over the interval 0 ≤ θ < 2π)

To know more about the conversion of coordinates into other forms visit:

brainly.com/question/31442898

#SPJ1

There are 144 ways to arrange the letters in UNIVERSALLY so that no two vowels occur consecutively and the consonants appear in alphabetical order

To solve this problem, we can break it down into two parts:

Part 1: Arranging the consonants in alphabetical order
The consonants in UNIVERSALLY are N, R, S, V, and Y. Since we want them to appear in alphabetical order, there is only one way to arrange them: NRSVY.

Part 2: Arranging the vowels so that no two occur consecutively
There are four vowels in UNIVERSALLY: E, I, U, and A. To arrange them so that no two occur consecutively, we can use the following strategy:

1. Start with the two consonants N and R. There are three spaces between them where we can place the vowels: _N_R_. We can place the vowels in these spaces in 4! = 24 ways.

2. Next, we add the consonant S to the left of N. There are now four spaces between S and R: S _ N _ R _. We can place the vowels in these spaces in 3! = 6 ways.

3. We continue adding consonants in alphabetical order and placing the remaining vowels in the available spaces. After adding V and Y, we end up with the following arrangement:

S U N I V E R S A L L Y R

There are 24 ways to arrange the vowels between the consonants at step 1, 6 ways to arrange them at step 2, and only 1 way to arrange them after all the consonants have been added. Therefore, the total number of arrangements that satisfy both conditions is:
24 x 6 x 1 = 144

So there are 144 ways to arrange the letters in UNIVERSALLY so that no two vowels occur consecutively and the consonants appear in alphabetical order.

To know more about "Consonants and vowels" refer here:

https://brainly.com/question/30551558#

#SPJ11

The relation {(5,0), (0,5), (5,1), (1,5)} is not a function because some inputs have multiple outputs.

To graph the relation {(5,0), (0,5), (5,1), (1,5)}, we can plot the points on a coordinate plane and connect them to form a scatter plot.

The graph of this relation looks like two intersecting lines that form an "X" shape, where the points (5,0) and (0,5) are on one line and the points (5,1) and (1,5) are on the other line.

Now, to determine whether this relation is a function or not, we need to check if each input (x-value) is associated with exactly one output (y-value).

Looking at the points, we see that both x=5 and y=5 have multiple outputs: (5,0) and (5,1) for x=5, and (0,5) and (1,5) for y=5. This means that the relation is not a function, as there are multiple y-values associated with a single x-value, violating the definition of a function.

To learn more about function here:

https://brainly.com/question/18315707

#SPJ1

The x² value lie between 1.42 and 2.37

The formula to calculate the x² value is:

χ² = Σ (Observed frequency - Expected frequency)² / Expected frequency

Here, Σ represents the sum of all the values in the calculation. The observed frequency is the actual frequency of a category in the sample, while the expected frequency is the theoretical frequency based on the null hypothesis.

The x² value is compared to a chi-squared distribution table to determine its significance level. The table shows the probability of obtaining a certain x² value under the null hypothesis for different degrees of freedom. Degrees of freedom (df) are calculated as the number of categories minus 1.

If the calculated x² value is greater than the critical value from the table for a given significance level, the null hypothesis is rejected, and the alternative hypothesis is accepted. This means that there is a significant relationship between the variables. If the calculated x² value is less than the critical value, the null hypothesis is accepted, and no significant relationship is found.

In the context of the problem given, the x² value is used to test the hypothesis that the genes are unlinked. The significance level used is 0.05, which means that there is a 5% chance of rejecting the null hypothesis when it is actually true. If the probability corresponding to the x² value is less than or equal to 0.05, the hypothesis should be rejected. If it is greater than 0.05, the results are not statistically significant, and the hypothesis is accepted.

To know more about hypothesis here

https://brainly.com/question/29576929

#SPJ4

Complete Question:

The x² value means nothing on its own- it is used to find the probability that, assuming the hypothesis is true, the observed data set could have resulted from random fluctuations. A low probability suggests that the observed data are consistent with the hypothesis, and thus the hypothesis should be rejected, A standard cutoff point used by biologists is a probability of 0.05(5%). If the probability corresponding to the x² value is 0.05or considered statistically significant, the hypothesis (that the genes are unlinked) should be rejected. If the probability is above 0.05, the results are not statistically significant: the observed data are consistent with the hypothesis.

Determines which values on the df =3 line of the table your calculated x² value lies between.

Answer:10g-3

Step-by-step explanation:

Answer:

g=0.5

Step-by-step explanation:

2(5—1)=3

10g—2=3

10g—2+2=3+2

10g=5

10g/10=5/10

g=0.5

Analyst input the function, they follow a predetermined structure that includes all required information for the function and its proper placement. so, syntax  of a function does this describe.

Syntax is a predetermined structure that includes all required information and its proper placement.

A formula in Excel is used to do mathematical calculations. Formulas always start with the equal sign = typed in the cell, followed by your calculation.

In the syntax of all Excel functions, an argument enclosed in [square brackets] is optional, other arguments are required. Meaning, your Sum formula should include at least 1 number, reference to a cell or a range of cells. For example: =SUM(B2:B6) - adds up values in cells B2 through B6.

Learn more about syntax here :-

https://brainly.com/question/17284674

#SPJ4

x - 4/3 ≤ 0 is equivalent to x ≥ 4/3, and they both represent the same set of values for x. My friend is correct.

The relationship between two values that are not equal is defined by inequalities.

When we subtract 4/3 from both sides; x ≤ 4/3 can be rewritten as:

x - 4/3 ≤ 0

-6x ≤ -8 can be simplified by dividing both sides by -6 and reversing the inequality which gives:

x ≥ 4/3.

Full question "Your friend says that the inequalities x ≤ 4/3 and -6x ≤ -8 is your friend correct? Explain the reason"

Read more about inequalities

brainly.com/question/25275758

#SPJ4

The answer of this question is equation [-6x+4y=16].

An equation is a mathematical statement that shows the equality between two expressions, typically separated by an equal sign. It can contain variables, constants, and mathematical operations such as addition, subtraction, multiplication, and division. The goal of solving an equation is to find the value of the variable that makes the equation true.

In mathematics, a system refers to a collection of mathematical objects or entities that are related or interconnected in some way.

System A

5x-y=-11

3x-2y=-8

System B

5x-y=-11

-2(3x-2y)=-8×(-2)

5x-y=-11

-6x+4y=16

Learn more about system here:

https://brainly.com/question/31462941

#SPJ1

The probability that exactly one of the computers will be defective is 0.141

To calculate the probability of exactly one defective computer being selected out of four computers, we can use the binomial distribution formula

P(X = k) = (n choose k) × p^k × (1 - p)^(n - k)

where P(X = k) is the probability of exactly k successes (in this case, one defective computer), n is the total number of trials (in this case, four computers being selected), p is the probability of success (in this case, the probability of selecting a defective computer), and (n choose k) is the binomial coefficient, which represents the number of ways to choose k items out of n.

The probability of selecting a defective computer is 4/15, since there are 4 defective computers out of 15 in total. Therefore, the probability of selecting exactly one defective computer out of four is:

P(X = 1) = (4 choose 1) × (4/15)^1 × (11/15)^3

= 4 × 4/15 × 1331/3375

= 0.141

Learn more about probability here

brainly.com/question/11234923

#SPJ4

The given question is incomplete, the complete question is:

A computer retail store has 15 personal computers in stock. A buyer wants to purchase 4 of them. Unknown to either the retail store or the buyer, 4 of the computers in stock have defective hard drives. Assume that the computers are selected at random. What is the probability that exactly one of the computers will be defective?

a) The exact solutions on [0, 2π) are t = π/3, π, and 5π/3. b) The exact solution on the interval [0, π) is t = 2π/3. c) The solutions are θ = π/3 and θ = 5π/3. d) The exact solutions on the interval [0, 2π) are: t = arcsin[(-1 +  [tex]\sqrt{41}[/tex])/4] and t = 2π - arcsin[(-1 +  [tex]\sqrt{41}[/tex])/4] using trigonometric identities.

a) We can rewrite the equation as:

2[tex]cos^{2}t[/tex] + cos(t) - 1 = 0

Using the quadratic formula, we get:

cos(t) = [-1 ± [tex]\sqrt{1-4(2)(-1)}[/tex] ] / (4)

cos(t) = [-1 ± [tex]\sqrt{9}[/tex]]/4

cos(t) = [-1 ± 3]/4

Thus, we have two solutions:

cos(t) = 1/2, which gives us t = π/3 and t = 5π/3

cos(t) = -1, which gives us t = π

Therefore, the exact solutions on [0, 2π) are t = π/3, π, and 5π/3.

b) We can use the identity [tex]tan^{2}t[/tex] + 1 = [tex]sec^{2}t[/tex] to rewrite the equation as:

[tex]tan^{2}t[/tex] = - [tex](3/2)^{2}[/tex]

Taking the square root of both sides and remembering that tan(t) is negative in the third quadrant, we get:

tan(t) = -3/2

Using the identity tan(t) = sin(t)/cos(t), we can rewrite this as:

sin(t)/cos(t) = -3/2

Multiplying both sides by cos(t) and rearranging, we get:

sin(t) = -3cos(t)/2

Squaring both sides and using the identity [tex]sin^{2}t[/tex] + [tex]cos^{2}t[/tex] = 1, we get:

9[tex]cos^{2}t[/tex]/4 + [tex]cos^{2}t[/tex] = 1

Expanding and simplifying, we get:

13 [tex]cos^{2}t[/tex] /4 = 1

[tex]cos^{2}t[/tex]  = 4/13

Taking the square root of both sides and remembering that cos(t) is negative in the third quadrant, we get:

cos(t) = -2[tex]\sqrt{13}[/tex] /13

Using the identity  [tex]sin^{2}t[/tex] +  [tex]cos^{2}t[/tex]  = 1, we can solve for sin(t) as:

sin(t) = -3/2 cos(t) = 3[tex]\sqrt{13}[/tex] /13

Therefore, the exact solution on the interval [0, π) is t = 2π/3.

c) We can use the identity sin(2θ) = 2sin(θ)cos(θ) to rewrite the equation as:

sin(θ) = 2sin(θ)cos(θ)

Dividing both sides by sin(θ) (assuming sin(θ) is non-zero), we get:

1 = 2cos(θ)

cos(θ) = 1/2

Therefore, the solutions are θ = π/3 and θ = 5π/3.

d) We can use the identity cos(2t) = 1 - 2 [tex]sin^{2}t[/tex]  and rearrange the equation as:

2 [tex]sin^{2}t[/tex]  + sin(t) - 5 = 0

Solving this quadratic equation using the quadratic formula, we get:

sin(t) = [-1 ± [tex]\sqrt{41}[/tex]]/4

Since the sine function has a range of [-1, 1], only the positive solution is possible, so we have:

sin(t) = (-1 + [tex]\sqrt{41}[/tex])/4

Using the identity [tex]cos^{2}t[/tex] = 1 -  [tex]sin^{2}t[/tex] , we can solve for cos(t) as:

cos(t) =[tex]\sqrt{1-sin^{2}t}[/tex] = [tex]\sqrt{17-\sqrt{41} }/4[/tex]

Therefore, the exact solutions on the interval [0, 2π) are:

t = arcsin[(-1 +  [tex]\sqrt{41}[/tex])/4] and t = 2π - arcsin[(-1 +  [tex]\sqrt{41}[/tex])/4]

To learn more about trigonometric identities here:

https://brainly.com/question/3785172

#SPJ4

Answer: If there are 60 questions and the student has to answer 75% of questions then the number of questions the student must answer is 45

Step-by-step explanation:

No of questions= 60,

Answers to be given= 75%

then no of questions to pass the exam= No of questions*Answers to be given in percentage

=60*75/100\

=45

Hence, the correct answer are Function  f(x)  is  translated  6  units  to  the left and Function  f(x)  is translated 8 units down.

Function, in mathematics, an expression, rule, or law that defines a relationship between one variable (the independent variable) and another variable (the dependent variable). Functions are ubiquitous in mathematics and are essential for formulating physical relationships in the sciences.

The absolute value of a number refers to the distance of a number from the origin of a number line. It is represented as |x|,  which defines the magnitude of any integer ‘x’. The absolute value of any integer, whether positive or negative,  will be the real numbers,  regardless of which sign it has.   It is represented by two vertical lines  |x|,  which is known as the modulus of x.

Function  f(x) = ||x||  is  transformed  to  create function  g(x) =  ||x+6||-8.

To  get  from  f(x)  to  g(x),

we  need  to  perform  the  following  transformations:

Therefore,  the correct  statements  are:

Learn more about Integer here:

https://brainly.com/question/929808

#SPJ1

Answer:

sugger

Step-by-step explanation:

because she bought 34.15 super and 34.144 pepper

The height of the cuboid is 14cm.

What is the perimeter?

A closed path that covers, encircles, or outlines a one-dimensional length or a two-dimensional shape is called a perimeter. A circle's or an ellipse's circumference is referred to as its perimeter. There are numerous uses in real life for perimeter calculations.

Here, we have

Given: Joe has 784 one-centimeter cubes.

He arranges all of the cubes into a cuboid.

The perimeter of the top of the cuboid is 30 cm.

Each side of the cuboid has a length greater than 2 cm.

We have to find the height of the cuboid.

1. a = 7, b = 8

V = 784

We know that

height = V/s

h = 784/56

h = 14cm

Hence, the height of the cuboid is 14cm.

To learn more about the perimeter from the given link

https://brainly.com/question/19819849

#SPJ1

The solution to this system of equations can be found by equating f(x) and g(x) and solving for x:

3x = x + 2

2x = 2

x = 1

Based on the given table data, we can see that the number of imports (f(x)) and the number of exports (g(x)) follow a linear relationship with respect to the month (x). The data shows that as the month progresses, both the number of imports and exports increase.

The system of equations can be represented as follows:

f(x) = 3x

g(x) = x + 2

The first equation f(x) = 3x represents the number of imports, where the coefficient of x is 3, indicating that the number of imports increases by 3 units for every increase of 1 unit in the month.

The second equation g(x) = x + 2 represents the number of exports, where the coefficient of x is 1, indicating that the number of exports increases by 1 unit for every increase of 1 unit in the month. Additionally, there is a constant term of 2, which represents the initial number of exports in the month of January.

The solution to this system of equations can be found by equating f(x) and g(x) and solving for x:

3x = x + 2

2x = 2

x = 1

The solution x = 1 represents the month of January, where both the number of imports and exports are equal to 3. This implies that in the month of January, there were 3 units of imports and 3 units of exports.

In all, the solution to the system of equations indicates that in the month of January (x = 1), the number of imports (f(x)) and the number of exports (g(x)) were both 3 units, as per the given data in the table.

Read more about functions here:

https://brainly.com/question/26651007

#SPJ1

The expression that represents the relationship between the step number n and the total number of small squares in the pattern is this: (n-1)^2.

From the given information, we can see that the pattern starts with 0 squares at step 1, and each subsequent step adds a square to the pattern. However, the lower right square is always missing. Therefore, the total number of small squares in the pattern at step n can be represented by the expression: (n-1)^2

The reason we subtract 1 from n is that we started counting from step 1, whereas the expression (n-1)^2 assumes that we start counting from 0. Then we square (n-1) to account for the number of squares in the pattern, excluding the missing square in the lower right corner.

Complete Question:

Which expression represents the relationship between the step number n and the total number of small squares in the pattern?

A pattern of small squares. Step 1 has 0 squares. Step 3 has 3 squares: 2 by 2 but missing the lower right square. Step 3 has 8 squares: 3 by 3 but missing the lower right square.

Learn more about patterns here:

https://brainly.com/question/27033681

#SPJ1