Los pueblos prehispánicos están relacionados con las civilizaciones nativas de la América hispánica y anglosajona antes de la llegada de los colonos españoles al continente.
¿Quiénes eran los pueblos prehispánicos?En ella se organizaron civilizaciones como los mayas y los incas, quienes poblaron América antes de la llegada de Colón y el inicio de la colonización del continente. Los mayas, por ejemplo, fueron una civilización que ocupó Centroamérica y México durante mucho tiempo.
La civilización maya se organizó y estructuró de forma descentralizada en ciudades-estado, con lengua propia y religión politeísta. Su economía se basó en la práctica de la agricultura, y obtuvieron desarrollados conocimientos en astronomía, medicina y matemáticas.
Por lo tanto, conocer las civilizaciones prehispánicas y sus características ayuda a comprender los aportes realizados por estos pueblos en diferentes áreas de la sociedad americana, como la cultura y la ciencia.
Encuentre más información sobre Los Mayas aquí:
https://brainly.com/question/1981417
#SPJ1
If the distance between two points is 2cm on a map scale of 1:100000, what will the distance be on a 1:50000 map
Explanation:
2÷1:50000=__________________cm
Cliff that shows layers of sedimentary rock in the area shifted along a fault what can the geologist conclude about geologic history of the area where fault was found
The geologist has come to the conclusion that the fault in question predates the deposition of sedimentary rock. This is further explained below.
What is a sedimentary rock.?Generally, Along with igneous and metamorphic rocks, sedimentary rocks are considered to be one of the three primary kinds of rocks.
In conclusion, The geologist may deduce from the analysis of the fault that it existed before sedimentary rock was formed.
Read more about sedimentary rock.
https://brainly.com/question/27094621
#SPJ1
Answer is c:The fault occurred after the sedimentary rock was deposited.
Explanation:i just took the quiz
why should we care about immigration
Answer:
immigration help to a country to grow their labor or taxes
Explanation:
Immigrants also make an important contribution to the U.S. economy. Most directly, immigration increases potential economic output by increasing the size of the labor force. Immigrants also contribute to increasing productivity.
One of the most destructive hazards associated with composite volcano eruptions are super-heated gases infused with incandescent ash and larger lava fragments racing down steep volcanic slopes called ____________________.
One of the most destructive hazards associated with composite volcano eruptions are super-heated gases called pyroclastic flows.
What are pyroclastic flows?The pyroclastic flows are harmful mixtures of warmed rocks and gases released during volcanic eruptions.
These pyroclastic flows are very harmful because they reach very high velocities (up 710 km per hour).
In conclusion, one of the most destructive hazards associated with composite volcano eruptions are super-heated gases called pyroclastic flows.
Learn more about pyroclastic flows here:
https://brainly.com/question/15870685
#SPJ1
What type of environment is shown in the image?
An environment with land covered in snow and an animal with white fur
Mountain
Swamp
Tundra
Wetland
An environment with land covered in snow and an animal with white further. Type of environment is shown in the image is Tundra. Thus, option (c) is correct.
According to the given image, the environment was shown on the Tundra. The term tundra refers to the wilderness, unwooded community with very little indecisive quantity.
The tundra is spread over with snow for most of the year and has a short maturation time period. Very few living organisms cause their residence in the tundra due to the unpleasant environment.
Tundra systems are unwooded regions found in the Arctic Zone and on the tops of natural elevation, where the climate is cold and breezy, and rainfall is scant.
As a result, the significance of the type of environment is shown in the image are the aforementioned. Therefore, option (c) is correct.
Learn more about on environment, here:
https://brainly.com/question/28782451
#SPJ3
Tropical climates exist between which of latitudes
Which type of rock may result when sedimentary rock is exposed to extreme heat and pressure?.
Answer:
Metamorphic rocks started out as some other type of rock, but have been substantially changed from their original igneous, sedimentary, or earlier metamorphic form. Metamorphic rocks form when rocks are subjected to high heat, high pressure, hot mineral-rich fluids or, more commonly, some combination of these factors.
Explanation:
1/10
Find the missing side of the right triangle. Leave
answer in simplest radical form.
If the legs of a right triangle are 3 and 4, then the
hypotenuse is
Explanation:
if the right triangle are 3and 4 then the hypotenuse should be 12 . So you multiply 3×4=12
The thermal equator during the month of July trends _________over continents and ________________ over the oceans.
Answer:
Ans:
Explanation:
the thermal equator during the month of july trends 20°-25°N over continents and ____________ over the oceans
sorry I didn't got that
hope it helps
Regularly spaced joints in an outcrop may indicate that an area ________. a.is underlain by a thrust fault b.has experienced tension c.is under intense shear stress d.is underlain by a magma body
Regularly spaced joints in an outcrop may indicate that an area is under intense shear stress. Hence, Option C is correct.
What is Shear Stress?A kind of stress that arises from a component. The components of force and material cross section are in parallel directions. A stress that changes a member's shape. This stress is great when it is parallel to neutral axis. Shear stress is denoted by τ. In Greek it is pronounced as "tau".
An image is attached for better understanding.
Therefore, Option C: under intense shear stress is correct.
Learn more about shear stress from here:
https://brainly.com/question/23270001
#SPJ1
Winds are named based on Group of answer choices the direction from which they originate. the altitude at which they occur. the direction in which they are blowing. the scientist who first described them
Winds are named based on the direction from which they emanate.
What factor determines how winds are named?
Basically, winds are named judging from the direction from which a particular wind has originated.
For instance, when a wind originates from the west coast, it is likely that its name would indicate that it started from the west.
In essence, the correct portion in this case, is the one that indicates the direction of the wind being a major factor that would be considered when forming its name.
Find further guidance in the link below:
https://brainly.com/question/1319281
#SPJ1
What does it mean to be free
/
Answer:
Freedom means you are free to choose, and free from boundaries
Explanation:
Can I have brainliest
Describe the composition and the main parts of a comet.
A comet, often known as a filthy snowball, is an ice mass coated with dust and tiny rocky fragments. The comet heats up and emits gases as it approaches the sun, a process known as outgassing. The so-called comet tail results from this.
There are 5 parts of a comet:
The Nucleus, also known as the core, is a solid mass that is largely formed of ice and dust with a little black biological stuff thrown in. It is just a few kilometers broad.A comet's nucleus is surrounded by a spherical envelope of gas called the Coma, which is around a million kilometers large.The comet releases hydrogen as it absorbs UV radiation, which escapes the comet's gravity and forms the hydrogen cloud.the Dust Tail: The sun's radiation drives dust particles out of the coma. The tail so constantly faces away from the sun. The length of this tail might reach 10 million kilometers. the Ion Tail: Some cometary gases become ions when charged solar particles interact with them, creating an ion. The ion track, which is often smaller than the dust path, can be 100 million kilometers long.Sedimentary rocks formed through the accumulation of organic carbon (dead plant matter) in low-oxygen environments (like swamps) are:
Biochemical sedimentary rocks are sedimentary rocks created by the buildup of organic carbon (dead plant debris) in low-oxygen conditions (such as swamps).
When organisms utilize elements dissolved in air or water to develop their tissue, biochemical sedimentary rocks form. The calcareous skeletons of creatures such as corals, mollusks, and foraminifera are used to make most varieties of limestone.
Shells and bodies of submerged creatures are used to build biochemical sedimentary rocks. Chemical components from the water are extracted by living creatures and used to form shells and other body parts. Aragonite, a mineral related to and usually replaced by calcite, and silica are among the constituents.
To know more about biochemical sedimentary rocks click here:
https://brainly.com/question/13719076
#SPJ4
What is the value of x?
Enter your answer in the box.
A quadrilateral with interior angles. Angle F is equal to 95 degrees, angle G is equal to 92 degrees, angle H is equal to 96 degrees, and angle I is equal to 7x degrees.
Answer:Correct
Explanation:Correct
Why ethiopia still remain to be the least urbanized country in the world and what are the major problems of urban centres of ethiopia
The Ethiopian nation is the least urbanized due to the fact that they like to focus on a peasant type of lifestyle that revolves around agriculture.
Why Ethiopia is the last developed?This is due to the fact that the nation is a self sufficiency nation that is based on agriculture. This is known to encourage the peasant lifestyle.
The slow urban growth is aqlso due to the Italian invasion that the nation had in the year 1935.
The major issues they have are lack of access to jobs and infrastructure.
Read more on Ethiopia here:
https://brainly.com/question/1289268
#SPJ1
Use the drop-down menus to answer the questions about fronts and weather maps. cold fronts appear on weather maps in areas of . warm fronts appear on weather maps in areas of .
Cold fronts appear in areas of large temperature and air pressure decrease, whereas warm fronts appear in areas of Temperature and air pressure increase.
What are cold fronts?Cold fronts are masses of atmospheric air that exert pressure on light warmer air masses, which then tend to rise in the atmosphere.
Cold fronts can be diagrammed in weather maps as blue lines and different triangular forms with sense to the region where they move.
In conclusion, cold fronts appear in areas of large temperature and air pressure decrease, whereas warm fronts appear in areas of Temperature and air pressure increase.
Learn more about cold fronts here:
https://brainly.com/question/1134430
#SPJ1
The Kangra and Kullu valley are located in:
(a) Uttarakhand
(b) Jammu and Kashmir
(c) Himachal Pradesh
(d) Uttar Pradesh
Mass wasting, a process that often occurs between weathering and erosion, involves ________.
Answer:
it includes the decomposition and disintegration of rocks in "situ"
"Igneous rocks that crystallize underground are ______________ rocks, while _____________ rocks crystallize after emerging from a volcanoe"
Instrusive and Extrusive are the correct answer respectively.
Intrusive Rocks
Intrusive rocks are igneous rocks that form when magma cools under the earth's surface. They can be identified by their large interlocking crystals, which grew large due to their slow cooling. Granite is a common type of intrusive rock that is distinguished by the presence of blocky pink potassium feldspar crystals.
Diorite, granite, and pegmatite are examples of intrusive igneous rocks.
Extrusive RocksExtrusive rocks are formed on the surface of the Earth from lava, which is magma that has emerged from underground. Intrusive rocks are formed from magma that cools and solidifies within the crust of the planet.
Basalt, tuff, pumice are examples of extrusive igneous rock.
Learn more about Igneous rocks on
https://brainly.in/question/21132281?msp_srt_exp=6
#SPJ4
A trip to Taipei, Taiwan, to study the Matsu parade would make an appropriate chapter for a book on the: Group of answer choices environmental geography of cities political geography of cities cultural geography of cities economic geography of cities
Answer:
geography of cities cultural geography
Explanation:
Answer:
d. geography of cities cultural geography
Explanation:
What is this bug? Just asking
What is the most important data for studying the potential for flooding along a river for several decades into the future
Discharge data from stream gauges are the most important data for studying the potential for flooding along a river for several decades into the future.
Move level (or water level) and streamflow (or discharge) are measured at locations called streamflow gaging stations. The stage is measured and recorded continuously by means of electronic devices.
Discharge, that's every now and then known as streamflow or water drift, is described because the charge at which an extent of water passes with the aid of a selected place. Discharge and gage peak are associated values.
It's far crucial due to its impact on water exceptional and on the dwelling organisms and habitats in the stream. large, unexpectedly flowing rivers can receive pollutants discharges and be little affected, while small streams have less capability to dilute and degrade wastes.
Learn more about flooding here https://brainly.com/question/12686086
#SPJ4
Why are the Mediterranean and Black Seas prone to heavier loads of pollution than the Atlantic Ocean and North Sea
They are landlocked and do not have the ability to flush themselves out quickly which results in contamination of European sea. and the Mediterranean sea .
Contamination of Mediterranean seasThe report shows that all four regional seas in Europe have a large-scale contamination problem, ranging from 96 % of the assessed area in the Baltic Sea and 91 % in the Black Sea, to 87 % in the Mediterranean and 75 % in the North-East Atlantic Ocean. The coverage of the assessed area is mostly good but it varies considerably between the four seas and remains limited in the offshore waters of the Mediterranean Sea.
Overall, contamination is declining in all four seas, though the insecticide DDT appears to be at best stabilising in the Mediterranean Sea. The concentrations of some well-known contaminants, such as cadmium and mercury, appear to be declining but in many areas not enough to meet agreed thresholds.
Learn more about Mediterranean here :
https://brainly.com/question/14677605
#SPJ4
why are development work essential ?
Answer:
Development work is essential because if the place is developed the Foreign currency can be earn
The analemma is located north of the Tropic of Cancer. True or false?
It is a true statement that the analemma is located north of the Tropic of Cancer.
Where is the analemma located?It is appears with a smaller loop in the north of the larger loop, that is, at the North Pole, it would be completely upright and only the top half of it would be visible.
However, when we head south, the entire analemma would become visible.
Therefore, It is a true statement that the analemma is located north of the Tropic of Cancer.
Read more about analemma
brainly.com/question/11408583
#SPJ1
meaning of navigable
Answer:
it means in Hindi जहाज़ रानी का
For any MEDC of your choice,draw a pie chart and describe the population distribution(description should be one page long)
Pie charts are graphical representations that show how much of the whole region each population represents. The distribution frequencies can be compared for these populations.
How to interprete a pie chart?Pie charts are circular graphs that represent the total amount (100%) of something, a group, or a unit.
This chart is divided into different sectors -slices-. Each of them is a category or subgroup and reflects the frequency or the magnitude of the elements composing the whole unit.
Pie charts are useful to make comparisons and easy interpretations according to the data we are representing.
For a better, I will provide you with a hypothetical example,
Let us imagine we are studying an unknown area of Mars known as Region X, where there are several populations, named Population 1, population 2, population 3, population 4, population 5, population 6, population 7, and population 8.
In this study, we need to express how much of the whole Region X each population represents. So we will use a pie chart to make this comparison and data about the population sizes.
We will consider,
Region X as the whole group or unit (100%)Each population is a sector -slice- that represents a percentage of the whole group.
You will find this pie chart in the attached files.
From this pie chart, we can conclude that,
Population 7 is the largest, representing 27% of the whole region X.Population 1 is the smallest, being only 3% of region X.Populations 6 and 7 together represent 50% of the whole region X.Populations 1, 2, 3, 4, and 5 together represent the other 50% of the region X.
This is an example. Now you can use your data and make the same reasoning to answer the question.
You can learn more about pie chart and population distribution at
https://brainly.com/question/15208052
https://brainly.com/question/12216180
#SPJ1
Western countries share the blame for the failure to complete the Doha round of trade talks.
In this sentence, complete means to:
protect against a challenge or attack
carry out
deal with in a routine way
designate by an identifying term
In the sentence above, complete means to: B. carry out.
What is trade?Trade is a strategic process that typically involves the buying and selling of goods and services between a producer and the consumers in a particular geographical region or country.
In this scenario, western countries share in the blame for the failure to complete (carry out) the Doha round of trade talks.
Read more on trade here: https://brainly.com/question/17727564
#SPJ1
Why are deep focus earthquakes (those originating hundreds of miles below the surface) associated with subduction zones, but not with divergent boundaries and transform boundaries
Answer:
Because divergent and transform zones are close to the surface where spreading is occurring, while subduction zones, where the subduction plates are plunging down below the surface.
Explanation: