calulate the molarity
The first solution contains 0.600 mol of NaOH in 2.10 L of solution.
The second solution contains 10.3 g of NaCl in 675 mL of solution.

the answer is B transfer thru direct contact

Answer:

Decreases  

Explanation:

Answer:

The correct option is acetic acid

Explanation:

Distillation is the process of separating a mixture of substances based on differences in boiling points. During distillation, the compound with the lowest/least boiling point is distilled and collected first and then the one with the next least boiling point and it goes on like that.

From the explanation above, acetic acid has the least boiling point (in the organic layer) with 118°C and thus will distill first. This is then followed by isopentyl alcohol (130°C) and then isopentyl acetate (142°C) and finally sulfuric acid water (290°C).

Answer:

The answer  is  [tex]\frac{dT}{dP} = 2.84*10^{-4}\ K/Pa[/tex]

Explanation:

From the question we are told that

  The boiling point of water is  [tex]T_b = 100^oC = 100 + 273 = 373 \ K[/tex]

  The enthalpy of vaporization is  [tex]\Delta H_{vap} = 40.69 \ kJ mol-1 = 40.69 *10^{3} \ J/mol[/tex]

  The molar volume of liquid water is  [tex]V =0.019 * 10^{-3} m^3 mol^{-1}[/tex]

   The molar volume of steam is  [tex]V_s = 30.199 * 10^{-3} \cddot m^3\cdot mol^{-1}[/tex]

  The pressure is  [tex]P = 1.01325 \ bar[/tex]

Gnerally from Clausius Clapeyron equation we have that

      [tex]\frac{dP}{dT} = \frac{\Delta H_{vap}}{ T * \Delta V}[/tex]

Here  [tex]\Delta V = V_s - V[/tex]

=>     [tex]\Delta V = [30.199 * 10^{-3} ] - [ 0.019 * 10^{-3}][/tex]

=>     [tex]\Delta V = [30.199 * 10^{-3} ] - [ 0.019 * 10^{-3}][/tex]      

=>     [tex]\Delta V = 0.03018 \ m^3 mol^{-1}[/tex]          

So

    [tex]\frac{dP}{dT} = \frac{40.69 *10^{3} }{ 373 * 0.03018}[/tex]

=>  [tex]\frac{dP}{dT} = 3522.28 \ Pa/K[/tex]

Generally from the we are ask to obtain the change in the boiling point of water at 1000 C per Pa change under atmospheric pressure conditions which is mathematically represented as

       [tex]\frac{d T}{dP}[/tex]

So

    [tex]\frac{dT}{dP} = \frac{1}{\frac{dP}{dT} } = \frac{1}{3522.28}[/tex]

=> [tex]\frac{dT}{dP} = \frac{1}{\frac{dP}{dT} } = 2.84*10^{-4}\ K/Pa[/tex]

The question is incomplete; the complete question is;

If the pressure of each gas is increased at constant temperature until condensation occurs, which gas will condense at the lowest pressure?

A) Octane

B) Ethane

C) Butane

D) All the gases will condense at the same pressure

Answer:

Octane

Explanation:

If we study the table closely we will realize that octane has the greatest molecular mass among all the gases shown.

The greater the molecular mass, the lower the pressure required for the condensation of the gas. Hence, the lowest pressure is required for the condensation of octane at constant temperature.

Answer: If the outer shell is filled, the atom is stable. Atoms with unfilled outer shells are unstable, and will usually form chemical bonds with other atoms to achieve stability.

(hope this helps ^^)

the answer is D because can be tested the others ones is opinion

please mark me as brainliest

Answer:

0.34 J / g ⁰C

Explanation:

Let the specific heat of metal be s .

heat will be lost by hot metal and gained by water .

heat lost by metal = mass x specific heat x loss of temperature

= 75 x s x ( 99 - 28 ) = 5325 s

heat gained by water = mass x specific heat x gain of temperature

= 145 x 4.18 x ( 28 - 25 ) = 1818.3

heat lost = heat gained

5325 s = 1818.3

s = 0.34 J / g ⁰C

Answer:

B. When one element replaces another element in a compound during a chemical reaction

Answer:

The answer is boiling point

Given parameters:

Number of moles of Nitrogen = 2.0mole

Temperature of the gas = 1000c

Pressure on the gas = 100000Pa

Gas constant R = 8.31J/molK = 0.082atmdm³mol⁻¹k⁻¹

Unknown:

Volume in cubic meter and cubic decimeter = ?

Solution:

The ideal gas law is given as;

       PV  = nRT

where P is the pressure on the gas

          V is the volume of the gas

         n is the number of moles

         R is the gas constant

         T is the temperature of the gas

Let us convert to appropriate units;

      1000°C to K;

       K  = 1000 + 273  = 1273K

100000Pa to atm;

           101325Pa  = 1atm

           100000Pa = 0.99atm

 Input the parameters and solve for the unknown;

      0.99 x V  = 2 x 0.082 x 1273

                   V  = 210.9dm³

to m³;

        1000dm³   = 1m³

        210.9dm³ = [tex]\frac{210.9}{1000}[/tex]   = 0.21m³

Explanation:

subtract it into 273.15to convert it in to celcius

Answer:

1.-213(kcal/mol)*5mol=1065kcal

2.100/213 mol

a. The energy released from 5.0 mol of methane is -1065 kcal/mol.

b. The number of moles of methane needed to give 100. kcal heat is 0.4694 moles.

Combustion is a chemical process in which the element reacts with oxygen to produce heat and light. Burning of wood.

The equation of combustion of methane:

CH₄ (g) + 2O₂(g) ------> CO₂ (g) + 2H₂O (l)

a) Enthalpy of the reaction is H = -213 Kcal/mol

This means 213 Kcal heat is released in the burning of one mole of CH4

H reaction = [ H products ] - [ H reactants ]

Hr = [ H(CO₂)g + 2H(H₂O)l ] - [ H(CH₄)g ] = -213 kcal/mol

For 5 moles of methane:

5CH₄(g) + 10O₂(g) -----> 5CO₂(g) + 10H₂O(l)

therefore, new Hr = 5 x -213 = -1065 kcal/mol

H reaction = -1065 kcal/mol

b) 213 kcal is released per mole of Methane

then, to release 100 kcal we need, 100 / (213) = 0.4694 moles

Thus, the energy released is -1065 kcal/mol, and the number of moles is 0.4694 moles.

Learn more about combustion, here:

https://brainly.com/question/15117038

#SPJ5

Answer:

dendrites

axons

Explanation:

got it right on edg.

Answer:

B and D

Explanation:

edge

Answer:

The balloon will occupy a volume of 1.32L.

Explanation:

Given the following data;

Original Volume, V1 = 1.03L

Original Temperature, T1 = 99°C

New Temperature, T2 = 198°C

To find new volume V2, we would use Charles' law.

Charles states that when the pressure of an ideal gas is kept constant, the volume of the gas is directly proportional to the absolute temperature of the gas.

Mathematically, Charles is given by;

[tex] VT = K[/tex]

[tex] \frac{V1}{T1} = \frac{V2}{T2}[/tex]

Converting T1, from Celsius to Kelvin = 273 + 99 = 372K

Converting, T2, from Celsius to Kelvin = 273 + 198 = 471K

[tex] \frac{V1}{T1} = \frac{V2}{T2}[/tex]

Making V2 as the subject formula, we have;

[tex] V_{2}= \frac{V1}{T1} * T_{2}[/tex]

[tex] V_{2}= \frac{1.03}{372} * 471[/tex]

[tex] V_{2}= 0.0028 * 471[/tex]

V2 = 1.32L

Therefore, the balloon will occupy a volume of 1.32L at 198°C

Answer:

C

Explanation:

(A+B) are compounds and D is mixtures

no se bb si quieres salimos tu sabes

Answer:

Ok what question

Explanation:

Answer:

frogs don't spend all their time swimming, nor do they spend all ... The frog is capable of sitting perfectly still for hours on end, only to suddenly ... When a frog is resting or hunting, he will sit on whatever is handy.

Explanation:

Hope I helped if I did please mark me brainiest Thanks! <333 :3

Temperature is mostly responsible for the form of matter. For instance, when raising the temperature you're adding energy. This energy gives the individual molecules and atoms the ability to overcome the forces that hold them together. This can be seen when a solid turns into a liquid or a liquid turns into a gas. However, when you're lowering the temperature you're removing energy. The lack of energy results in less movement from the atoms. Gases condense into liquid because the atoms don't have enough energy to stay away from each other. Liquids solidify because the atoms don't have enough energy to slide past each other and they get stuck in place. So in conclusion, temperature determines how how much energy atoms have that allow them to move at different speeds which determines the state of matter.

Answer:

no

Explanation:

Answer:no

Explanation:The moon orbits the Earth once every 27.322 days. It also takes approximately 27 days for the moon to rotate once on its axis.

Answer:

The net force is greater at the second situation as well as the acceleration due to the contribution of the second guy.

Explanation:

Hello.

In this case, since the net force is computed via adding all the exerted forces on a body, for the first situation we can see that the net force equals the force provided by that guy when pulling, whereas in the second situation the net force equals the force of both of the guys pulling the car:

[tex]F_N_1=F_1\\\\F_N_2=F_1+F_2[/tex]

For the acceleration, we can see that applying an extra force (due to the second guy) turns out into a greater acceleration, that is why the car at the second situation reaches the tree whereas the other one does not.

Best regards.

Answer:

they are expected to have the same particles because their masses are the same with there molar mass

Answer:

52g of carbon dioxide

Explanation:

Liquid hexane + gaseous oxygen --> Carbon dioxide + gaseous water

The balance chemical equation is given as;

C6H12 + 9O2 --> 6CO2 + 6H2O

From the stochiometry of the reaction;

1 mol of hexane (86g) would consume 9 mol of oxygen (144g) to form 4 mol of carbon dioxide (264g)

The limiting reactant in this equation is hexane as it would run out before oxygen. This means hexane determines how much of the carbon dioxide is formed.

86g of hexane = 264g of crbon dioxide

17g of hexane = xg of carbon dioxide

x = 17 * 264 / 86 =  52g of carbon dioxide