Betelgeuse is a very large/bright star located about 500 light years away. if a similar star is located at 2000 light years away, its relative brightness is 1/16, option (a) is correct, compared to Betelgeuse.
The brightness of a star, as seen from Earth, is determined by its luminosity (the amount of energy it emits) and its distance from Earth. As a star gets further away, its apparent brightness (the amount of light it appears to emit) decreases. To compare the relative brightness of two stars, you can use the inverse square law, which states that the intensity of a point source of light (such as a star) is inversely proportional to the square of the distance from the source. In other words, if a star is located twice as far away as another star, its apparent brightness will be 1/4 of the other star's apparent brightness. In this case, the star located at 2000 light years away is four times further away from Earth than Betelgeuse, which is located 500 light years away. Therefore, according to the inverse square law, the relative brightness of the star located at 2000 light years away compared to Betelgeuse would be 1/4 x 1/4 = 1/16. In other words, the star located at 2000 light years away would appear to be 16 times dimmer than Betelgeuse.
So, the correct answer is "1/16".
To know more about light years please refer: https://brainly.com/question/13218254
#SPJ4
Question - Betelgeuse is a very large/bright star located about 500 light years away. if a similar star is located at 2000 light years away, its relative brightness, compared to Betelgeuse, would be which of the following?
(a) 1/16, (b) 1/2, (c) 1/35, (d) 1/15
the colors in a rainbow are caused by the colors in a rainbow are caused by different amounts of absorption for light of different colors by the water in the raindrops. the interaction of the light reflected from different raindrops. the downward motion of the raindrops. different amounts of refraction for light of different colors by the water in the raindrops.
Varying degrees of refraction for various colours of light by the water in raindrops.
What is absorption ?
A chemical or physical phenomena known as absorption occurs when molecules, atoms, and ions from the substance being absorbed move into the bulk phase (gas, liquid, or solid) of the medium in which they are being absorbed.
What is reflected ?
When a wave encounters a barrier between two media, it will abruptly change direction and reflect. The approaching wave disturbance, at least in part, stays in the same medium.
Different amounts of refraction for light of different colors by the water in the raindrops. because, the amount of light will under go refraction, internal reflection and dispersion.
Therefore, option (d) is correct.
Learn more about from the given link.
https://brainly.com/question/26061959
#SPJ4
In a Geiger tube the total time taken to create a pulse and then let the electrons recombine with the ions to again form a neutral state is about
A. 1 μs
B. 30 μs
C. 300 μs
D. 10,000 μs
In a Geiger tube, the total time taken to create a pulse and then let the electrons recombine with the ions to again form a neutral state is about C. 300 μs
How to calculate the ions?As we know that in G. M. Counter, slow positive ion takes 100μs to reach at cathode. If in this time, any other ion enters then no recording of this ion , known as dead time after this time also counter takes 100μs more, known as recovery time.
The sum of these times know as paralysis time of gm counter will be:
= (100+100+100)
= 300 μs.
Based on the information, the correct option is C.
Learn more about electrons on:
https://brainly.com/question/25674345
#SPJ1
the in situ moisture content of a soil is 15% with saturation level equal to 70% and void ratio of 0.9. the specific gravity of soil solids is 2.75. this soil is to be excavated and transported to a construction site for use in a compacted fill. if the specifications call for the soil to be compacted
This soil is to be excavated and transported to a construction site for use in a compacted Volume fill is 8680.73 m³
The specific gravity of solids = 2.75
situ moisture content of a soil is 15% with saturation level equal to 70% and void ratio of 0.9.
Dry weight = 103.5
Yd = 16.5/(1 + 18/100) = 14.34KN/m³
Volume of soil to be excavated to produce 7651m³
V = Yd compacted / Yd insite × compacted fill volume
V = 16.27/14.34 × 7651 = 8680.73 m³
No of trucks = V × Yinsity / 1.78 = 8680 × 16.5/178 = 826trucks.
Using the human body, such as by pinching or measuring an object's volume using the size of your hand, is the most traditional method of doing so. The human body, however, is incredibly unpredictable due to its differences. A more accurate technique to measure volume is to utilize fairly constant and long-lasting natural objects, like gourds, sheep or pig stomachs, and bladders. Small volumes are typically measured using standardized human-made containers today since metallurgy and glass manufacture have advanced through time. [3]: 393 By using a multiple or portion of the container, this approach is frequently used to measure small volumes of fluids or granular materials. To create a nearly flat surface, the container is shook or leveled off for granular items. The most exact approach to measure is not with this technique.
Learn more about Volume here:
https://brainly.com/question/17322215
#SPJ4
A 10-cm-long spring is attached to the ceiling. When a 2.0 kg mass is hung from it, the spring stretches to a length of 15 cm.
What is the spring constant k? Answer for this already found= 392 N/m
1) How long is the spring when a 6.0 kg mass is suspended from it?
The spring is 20cm long when a 6.0 kg mass is suspended from it.
What is Hooke's Law's spring constant, k?K stands for the proportionality constant, commonly referred to as the "spring constant." In layman's words, stiffness and strength are shown by the k variable in Hooke's law (F = -kx). An object requires more force to be stretched to a specific length the greater the value of k.
F=-kx
“-ve" is for the direction of motion
K=F/x
Dimensions of F=[MLT-²]
Dimensions of x=[L]
K=[MLT-²]/[L]=[MT-²]
DIMENSIONS OF SPRING CONSTANT IS
[MT-²]
Why do we use the spring constant?The spring constant is calculated by dividing the force required to stretch or compress a spring by the lengthening or shortening of the spring. It is used to identify whether a spring is stable or unstable, and consequently, what system it should be employed in.
Learn more about spring constant here:
brainly.com/question/14159361
#SPJ4
construction worker Bob IS standing at the top of a slanted rooftop when he accidentally drops & orange from his lunch bag; The orange rolls down the rool, which i> angled at 0 28,58 relative t0 Ihe harizontal as shown the figure below The bottom edge of the roofus meters above Ihe ground. Ihe orarge leaves the right edge ol Ihe rooftop with velocity 0l Ti 4.471,how fal, Arto the right of the roof edge does his 8 meter tall fellow consiruction warker Werdy have sland on the ground 50 that the orange just barely passes over her head? [Figure not diawn t0 scalel Imapa *x4: ALhae
Wendy must stand 1.19m to the left of the edge of the roof so that the orange just barely passes over her head.
Bob's orange will travel down the slanted roof with a velocity of 4.47 m/s, and it will hit the ground 3.0 m below the edge of the roof. The height of the orange above the ground at the edge of the roof is 1.8 m, and the angle of the roof is 28.5° relative to the horizontal.
To calculate the distance Ar that Wendy has to stand from the edge of the roof, we must first calculate the time it takes for the orange to reach the ground. Using the equation for the vertical displacement of an object with an initial velocity, we can solve for the time, t:
d = v*t - (1/2)*g*t^2
0 = 4.47*t - (1/2)*9.8*t^2
t = 0.938s
Next, we must calculate the horizontal displacement of the orange from the time, t. Using the equation for the horizontal displacement of an object with an initial velocity and a constant acceleration we can solve for the displacement:
x = v*t + (1/2)*a*t^2
x = 4.47*0.938 + (1/2)*0*0.938^2
x = 4.19m
To calculate the distance Ar that Wendy must stand from the edge of the roof, we must subtract the horizontal displacement of the orange from the height of the edge of the roof:
Ar = 3.0 - 4.19
Ar = -1.19m
Therefore, Wendy must stand 1.19m to the left of the edge of the roof so that the orange just barely passes over her head.
For more questions like Distance click the link below:
https://brainly.com/question/29175462
#SPJ4
a mass m starts at rest and then falls down distance l, where it contacts an unstressed spring of negligible mass. if the spring compresses for a maximum of l/2, find the force constant of the spring in terms of mg/l.
For a mass, the spring's force constant is 12 mg/L. M begins at rest and descends l distance before colliding with a negligible mass unstressed spring. if the spring is compressed for no longer than l/2.
The spring constant is significant because it demonstrates a fundamental material characteristic. The amount of force necessary to deform any spring made of any material is specified here. The material is more stiff when the spring constant is higher, and less stiff when the spring constant is lower. The force constant of an undamaged spring is k. It is stretched to an equilibrium length that is well inside the elastic limit by a weight that is suspended from it.
mg(L+L/2) = 0.5 kx^2
mg(3L)/2 = 1/2k(1/2)^2
3mgL/2 = kl^2/8
k = 12mg/L
Learn more about spring's force here
https://brainly.com/question/14655680
#SPJ4
Randomized block design: Researchers interested in identifying the optimal planting density for a type of perennial grass performed the following randomized experiment: Ten different plots of land were each divided into eight subplots, and planting densities of 2, 4, 6 and 8 plants per square meter were randomly assigned to the subplots, so that there are two subplots at each density in each plot. At the end of the growing season the amount of plant matter yield was recorded in metric tons per hectare. These data appear in the file pdensity. dat. The researchers want to fit a model like y = β1 + β2x + β3x 2 + , where y is yield and x is planting density, but worry that since soil conditions vary across plots they should allow for some across-plot heterogeneity in this relationship. To accommodate this possibility we will analyze these data using the hierarchical linear model described in Section 11.1. Randomized block design: Researchers interested in identifying the optimal planting density for a type of perennial grass performed the following randomized experiment: Ten different plots of land were each divided into eight subplots, and planting densities of 2, 4, 6 and 8 plants per square meter were randomly assigned to the subplots, so that there are two subplots at each density in each plot. At the end of the growing season the
The diversity of the vegetation on Earth contributes to its attractiveness, particularly the grassland, which is primarily covered in trees and grasses.
There are many different types of grassland, and one of them is savanna grassland, which is home to forbs and perennial grasses.
Large geographic areas called biomes are identified by a certain climatic pattern and a set of dominating plant and animal populations. Savanna and grassland biomes both have a dominant grass composition. In semi-arid climate zones where there is insufficient rainfall to sustain significant tree development, grassland biomes can be found. Savannas are grassland habitats that contain a sizable amount of woody vegetation, such as trees or bushes. Due to their need for a warm climate, they are found closer to the equator.
To know more about vegetation
https://brainly.com/question/14323508
#SPJ4
A vertical plate is submerged in water and has the indicated shape. Find a Riemann sum that describes the hydrostatic force against one side of the plate. Then, write the sum as an integral and evaluate it.The pressure of a fluid that is exerted on an object due to its gravity is called hydrostatic pressure. Mathematically hydrostatic pressure is represented as P=rhogh. The hydrostatic force is calculated by multiplying the hydrostatic pressure with the area.
The hydrostatic force is calculated by multiplying the hydrostatic pressure with the area is 6000lb.
What is hydrostatic force ?
A hydrostatic force is the outcome of a liquid's pressure loading when it acts on submerged surfaces. Calculating the hydrostatic force and determining the Centre of pressure are two important concepts in fluid mechanics.
What is gravity ?
A planet or other body's gravity draws objects toward its centre. The force of gravity keeps all the planets in their orbits around the sun.
The area of the strip is calculated as follows
Astrip = 6dy
Pstrip = pgy
Here, the density of water is p, the acceleration due to gravity is g and the vertical height of the strip from free surface of water is y.
The weight density of water is
Pg= 62.5 lb/ft3
The hydrostatic force again one side of the plate is calculated as follows.
F hydrostatic = ∫ P strip A strip
Substitute all the values in the above equation and integrate.
F hydrostatic = ∫ (pgy) (6dy)
F hydrostatic = ∫6pg ydy
F hydrostatic = 6pg y²/2
F hydrostatic = 6pg (6²/2 – 2²/2)
F hydrostatic = 6 X 62.5 (6²/2 – 2²/2)
F hydrostatic= 6000 lb
Therefore, hydrostatic force is calculated by multiplying the hydrostatic pressure with the area is 6000lb.
Learn more about hydrostatic pressure from the given link.
https://brainly.com/question/12933026
#SPJ4
based on these insights, you create your primary message. which of the following reflect the expectations of a primary message? A
Although electric vehicle sales demand is on the rise, low availability of charging stations and short battery range are significant hurdles that Gaea must overcome
B
Electric vehicle sales demand is expected to grow by more than 400% by 2025. However, the number of publicly available vehicle charging stations is a significant factor in consumer buying decisions. Currently, there are many locations with so few charging stations that electric car owners would run out of power when traveling between stations. Vehicle battery range is also a significant factor for consumers. In 2020, the average battery range was 210 miles. However, the vast majority of people say they will not buy an electric car until the battery range is at least 300 miles per charge
C
Electric vehicle demand is skyrocketing
D
The number of publicly available vehicle charging stations is a significant factor in consumer buying decisions. Therefore, Gaea must begin building vehicle charging stations
The insights to be used in creating a primary message is that; Electric vehicle demand is skyrocketing. Option C
What are electric vehicles?We can see that the demand for electric vehicles has increased in the recent times. Why has the demand for electric vehicles increased? We know that in the recent times there has been a push for the use of cleaner energy.
This has made a strong impressions upon governments around the would and has led to an increase in the rate at which any kind of research that tries to fund the use of devices that use alternative energy to fossil fuels is concerned.
As a result of this, there has been an increase in the demand and the use of the electric vehicles especially in the developed countries where more people can be able to afford the vehicles.
Learn more about electric vehicles:https://brainly.com/question/28174365
#SPJ1
use the theory of elasticity and given applied pressure at the end of construction, determine the settlements at 2p and 3p
Elasticity theory is concerned with the relationship between forces applied to an item and the subsequent deformations.
In practice, analyzing a material's elastic behavior is reduced to studying basic deformations and determining the appropriate elastic constants. Our bodily tissues are pliable. This mechanical feature is particularly significant in the lungs, skin, and arteries, because aging produces emphysema, loose skin, and arteriosclerosis. Elastic fibers are extracellular matrix fibers that resemble rubber and are responsible for tissue elasticity. Elasticity refers to an object's or material's capacity to return to its original shape after being stretched or crushed. Because of its elastic nature, a rubber regains its shape after a long stretch.
Learn more about elastic here-
https://brainly.com/question/25945297
#SPJ4
A baseball player friend of yours wants to determine his pitching speed. You have him stand on a ledge and throw the ball horizontally from an elevation above the ground. The ball lands away. What is his pitching speed?
The pitching speed of basketball player is 58 m/s for A baseball player The ball lands away
As the ball thrown in horizontally, the initial vertical velocity of the ball is zero.
(Vy)t = 0
Use the kinematic equation of motion, y = (Vy)t+1/2gt² and find the time of flight of the baseball.
3.0 m = (0)t + 1/2 (9.8 m/s²)t²
3.0 m = (4.9 m/s²)t²
t= √3.0 m /4.9 m/s²
= 0.78 s
The maximum horizontal distance (range) travelled by the ball is.
x = v2t
V2 = x/t
= 30 m/0.78 s
= 38 m/s
Consider the ball is being thrown 5° above the horizontal. The maximum height to which the ball can go above the elevation is,
h= (vsin 5°)² / 2g
= [vsin 5°]² / 2(9.8 m/s²)
= 3.87×10^-4 V²
The time taken for ball to reach the ground from the height 0.559 m above the elevation of height 3.0 m is,
t=√2hmax/g
= √2(3.87x10^-4 v²) / 9.8 m/s²
= 8.88x10^-3 v
The horizontal range of the ball is.
x = v₂t
30 m = (v cos 5°) (8.88x10^-3 v)
V² = 30 m / (8.88×10^-3) cos 5°
v=58 m/s²
Consider the ball is being thrown 5° below the horizontal. The time of flight of the ball is,
t = v cos 5° / 30 m
=3.32×10^-2 v
The time taken for ball to reach the ground can be calculated as follows.
y = (Vy)t1 + 1/2 gt²
3.0 m = (vsin 5°) (3.32 × 10^−2 v) + 1/2 (9.8 m/s²) (3.32×10^-2 v)² =
3.0 m = (0.289×10^-2)v²+5.4×10^-3v²
8.29×10^-3 V^2 = 3.0 m
V = √3.0 m / 8.29 8 10^-3
= 19 m/s
Therefore, the minimum speed of the ball is 19 m/s and maximum speed of the ball is 58 m/s
Learn more about Speed here:
https://brainly.com/question/28224010
#SPJ4
a block of mass m on an inclined surface is attached to a spring of negligible mass, as shown. the other end of the spring is attached to a wall, and there is negligible friction between the block and the incline. the block is pulled to a position such that the spring is stretched from its equilibrium position. the block is then released from rest. which of the following systems can be classified as a closed system?
A block of mass m on an inclined surface is attached to a spring of negligible mass, as shown is a system consisting of the block, spring, and Earth.
What is mass?
The amount of matter in a particle or object is represented by its mass, which is denoted by the symbol m. In the International System (SI), the kilogram serves as the default unit of mass (kg).
What is inclined surface ?
An inclined plane is the technical term for a sloped surface. It is well known that objects can accelerate down inclination planes due to an imbalanced force. Analyzing the forces acting onto an object on an inclined plane is crucial for comprehending this form of motion.
Therefore, a block of mass m on an inclined surface is attached to a spring of negligible mass, as shown is a system consisting of the block, spring, and Earth.
Learn more about mass from the given link.
https://brainly.com/question/1838164
#SPJ4
n 1986, a nuclear power accident in chernobyl, ukraine led to high radiation levels for kilometers surrounding the plant. the high levels of radiation caused elevated mutation rates in the surviving organisms, and evolutionary biologists have been studying vole populations in the chernobyl area ever since. based on your understanding of evolutionary mechanisms, which of the following most likely occurred in the vole populations following the accident?
Based on my understanding of evolutionary mechanisms, Mutation led to increased genetic variation in 1986, nuclear power accident Chernobyl, Ukraine.
Mutations:
Mutations, or changes in the nucleotide sequence, can be caused by transposition, covalent changes in structure brought on by reactions with environmental chemicals or physical agents, or errors during DNA replication. Cells are where the majority of sequence changes are corrected.
Without these mutations, populations of species would not change in a way that would allow them to adapt to environmental changes. A mutation is an abrupt change to DNA. Radiation or any type of mutagen can cause mutations. Mutations were brought about by the radiation in this catastrophe. As a result, the organism will vary.
Genetic Variation:
The variety in DNA sequence seen in each of our genomes is referred to as genetic variation. We are all different from one another in terms of our hair color, complexion tone, and even the form of our features due to genetic variance.
Learn more about Mutations here
https://brainly.com/question/2639398
#SPJ4
A student initially stands on a circular platform that is free to rotate without friction about its center. The student jumps off tangentially, setting the platform spinning. Quantities that are conserved for the student-platform system as the student jumps include which of the following? 1. Angular momentum II. Linear momentum III. Kinetic energy Al only B Il only С I and II only D II and III only E I, II, and 111
The quantity conserved for the student platform system when the student jumps is included in the momentum angular.
The true choice is A.
Angular momentum is simply defined as the momentum possessed by objects that move circularly.
Momentum angle also has meaning as a measure used to see how much linear momentum is directed around a certain point. This point is known as the center point.
Since angular momentum and linear momentum are vectors, the direction must be considered. As in this question, the direction of the linear momentum keeps changing as the circular platform rotates, and the direction of the angular momentum is always the same (both off the page and into the page). That's why linear momentum changes but angular momentum doesn't. So, the quantity conserved for the student platform system when the student jumps is included in the momentum angular.
Learn more about angular momentum at https://brainly.com/question/4126751
#SPJ4
La varilla liviana de la figura 5.12
A tank whose bottom is a mirror is filled with water to a depth of 19.3 cm. A small fish floats motionless 7.50 cm under the surface of the water. What is the apparent depth of the reflection of the fish in the bottom of the tank when viewed at normal incidence?
The fish's perceived depth is 5.3 cm, while the fish's picture is 24.8 cm. when observed at normal incidence, the perceived depth of a fish's reflect in the tank's bottom.
What do you deem an incident to be?
A "incidence" is the appearance of new cases of illness or injury within a population over a specific period of time. The amount of new cases in a population is how some public health experts define incidence, however
What distinguishes incidence from prevalence?
In contrast to prevalence, which is the percentage of a population with a particular characteristic, incidence is the number of new cases of a characteristic that appear in a population during a given time frame.
Briefing:
apparent depth=(Na/Nw)*s
=(1.00/1.33)*33cm
=24.8cm
To know more about incidence visit:
https://brainly.com/question/14221826
#SPJ4
A 66.9 kg diver steps off a 6.07 m tower and drops straight down into the water. If he comes to rest 2.96 m below the surface of the water, determine the average resistance force exerted on the diver by the water.
The average resistance force exerted on the diver by the water is 2,000 N
According to the law of conservation of energy, the mechanical energy is constant.
Mechanical energy (EM) is equal to the kinetic energy (Ek) + potential energy (Ep).
In the given problem, the diver comes to rest at 2.96 m below the surface of the water. Hence, at this point, his velocity is zero, so is its kinetic energy. Therefore, according to the law of conservation of energy:
ΔE = - mg (h₂ - h₁)
Where:
m = mass of the diver
g = gravitation due to gravity
h = height
Hence,
ΔE = - 66.9 x 9.8 x (-2.96 - 6.07)
= 5920.25 Joule
This is equivalent to the work done by the resistance force.
Hence,
W = ΔE = F . s
Where:
s = distance under water
Hence,
5920.25 = F x 2.96
F = 5920.25 / 2.96 = 2,000 N
Learn more about energy conservation here:
https://brainly.com/question/27422874
#SPJ4
Your system volume is running out of disk space. You need to extend the system volume to give it more space. Which of the following conditions must be met to extend the system volume?O The system volume must be formatted with NTFS.O The disk must have contiguous free space on the same disk.
Contiguous free space on the same disk is the sole available option for expanding the system volume. For both basic or dynamic disks, this is true.
Choose two benefits of solid state storage over hard drives from the list below.Your computer will boot up faster thanks to SSDs, which also provide faster data transfer. When running applications that access vast volumes of data, such an operating system, faster speeds imply SSDs can policies and procedures for managing at the ultra-speeds required in today's commercial environment.
Which of the following has to be true in order to increase the system volume?On the same disk, there must be continuous open space. Only contiguous free space within the same disk can be used to expand the system capacity.
To know more about disk space visit
brainly.com/question/28065270
#SPJ4
the top of the saturated zone, as marked by the dashed line in the illustration, is called the water .
The dashed line in the figure denotes the water, which is at the top of the saturated zone. The underground region is included in the saturated zone.
The geologic medium's whole network of connecting apertures is fully submerged in water. This zone is frequently divided into the phreatic zone and the capillary fringe by hydrogeologists. The area of ground directly below the water table is known as the zone of saturation. Water has seeped into the pores and cracks of the earth and rocks. Over the water table, the saturated zone is more corrosive than the saturated zone. One extreme of the area's moisture content and the other extreme of the soil's dryness. a saturated area. The unsaturated zone can contain discrete saturated zones.
Learn more about saturated zone here
https://brainly.com/question/18851564
#SPJ4
The complete question is-
The top of the saturated zone, as marked by the dashed line in the illustration, is called ?
You're carrying a 3.0-m-long, 20kg pole to a construction site when you decide to stop for a rest. You place one end of the pole on a fence post and hold the other end of the pole 35cm from its tip.
A) How much force must you exert to keep the pole motionless in a horizontal position?
Express your answer using two significant figures. answer must be "N"
You need to provide 132 N of force to maintain the pole horizontally.
The criteria are as follows: 3.2 m for the pole's length and 24 kg for its weight.
The pole's weight is determined as follows:
W = 24 x 9.8 = 235.2 N
The total force applied to maintain the pole's horizontality,
∑F = F1 + F2 = 235.2
F1 = 235.2 - F2
Consider the pole's core for a minute.
F1 × 1.6 = F2(1.6 - 0.35)
1.6(235.2 - F2) = 1.25 F2
376.2 - 1.6F2 = 1.25 F2
376.2 = 2.85 F2
F2 = 376.32 ÷ 2.85
F2 = 132.04
Learn more about force at
https://brainly.com/question/13191643?referrer=searchResults
#SPJ4
orientation of patterns: explain why the diffraction pattern of the hair appears in the direction that it does (i.e., horizontal vs. vertical)
Additionally, if the light is sent as a vertical array of lines, these lines can be bent into horizontal rows of dots.
Simply put, what is diffraction?The act of light spreading out after passing through a tiny area or bending around an object is known as diffraction. The diffraction of light waves is a topic covered in physics classes. Sound, radio, and water waves are all susceptible to diffraction.
What is diffraction and how does it work?Water waves bending around a stationary object are the most typical instance of diffraction. Around an object's edge, light bends similarly. They diffract, or shift direction, noticeably.
To know more about Diffraction visit:
https://brainly.com/question/16096548
#SPJ4
consider an earthquake to be a three-dimensional wave traveling through the earth's crust. the intensity of the earthquake passing through the earth is measured to be 11000 j/(m2*sec) at a distance 35 km from the source. the earthquake lasts for 14 seconds. ef picup part description answer save status a. determine the intensity at 1.3 km from the source. (include units with answer) format check click here to check your answer 6.25 pts.75% 2% try penalty 1 hint available
The Energy that can be captured is 8.267*10^7 KwH, Energy produced by earth quake in 11 seconds is 1.86*10^15 J.
What is intensity?
Intensity is the amount of energy a wave carries over a surface of a particular area in a unit of time, and it is the same as the energy density times the wave speed. The most popular unit of measurement is watts per square meter. The strength and size of a wave affect its frequency.
What is earth quake ?
An earthquake is the abrupt release of energy from the earth's crust that causes the earth's surface to shake. Seismic waves, also called S waves, are consequently produced.
I = 11000 J/(m^2 s)
r = 35 km
t = 11 s
a) from the given data
Energy produced by earth quake in 11 seconds
E = I*A*time
= I*4*pi*r^2*t
= 11000*4*pi*(35*10^3)^2*11
= 1.86*10^15 J
using,
log(E) = 4.8 + 1.5*M
log(1.86*10^15) = 4.8 + 1.5*M
==> M = 6.98
b) Energy that can be captured, E_captured = 16% of E
= 0.16*1.86*10^15
= 2.976*10^14
= 2.976*10^14/(3.6*10^6) KwH
= 8.267*10^7 KwH
the number of houses the earthquake could power for a year, N = E/10000
= 8.267*10^7/10000
= 8267
Therefore, Energy that can be captured is 8.267*10^7 KwH, Energy produced by earth quake in 11 seconds is 1.86*10^15 J.
Learn more about intensity from the given link.
https://brainly.com/question/16797771
#SPJ4
what is the period if a runner completes 5 laps around a circular track in 450s
Answer:
90 seconds to complete one lap around the track
Explanation:
To find the period of a runner's laps, we need to first find the length of time it takes for the runner to complete one lap around the track. We can do this by dividing the total time it takes to complete 5 laps by the number of laps:
period = 450 seconds / 5 laps
period = 90 seconds/lap
This means that it takes the runner 90 seconds to complete one lap around the track. This is the period of the runner's laps.
Public Radio station KXPR-FM in Sacramento broadcasts at 88.9 MHz. The radio waves pass between two tall skyscrapers that are 15.0m apart along their closest walls.
A). At what horizontal angles, relative to the original direction of the waves, will a distant antenna not receive any signal from this station?
B).If the maximum intensity is 3.40W/m2 at the antenna, what is the intensity at �6.00? from the center of the central maximum at the distant antenna?
The horizontal angle will be 1.4598 rad and the intensity will be 1.576 W/m² in relation to the waves' initial direction.
A radar antenna is a gadget that broadcasts radio waves and watches for reflected waves. An antenna's performance is based on its capacity to recognize the precise direction in which an object is positioned.
The specified direction's horizontal angle is:
sinθ ∝ 1
sinθ = nλ/a
n ∝ λ/a
n = (88.9 * 10⁶ * 15)/ 3 * 10⁸ = 4.4454
n max = 4
The maximum angle θ4 = (4 * 3 * 10⁸)/ 15 * 88.9 * 10⁶ = 64.14°
The value of the wavelength is:
λ = c / v = (3 * 10⁸)/ (88.9 * 10⁶) = 3.3745 m
I = Imax [(sin δ/2)/ δ/2]
β/2 = π /4 (a sinθ)
β = π / 3.3745 (15 sin 6°) = 1.4597 rad
I = 3.4 * (sin 1.4597/ 1.4597)² = 1.576 W/m²
As a result, at horizontal angles, the intensity will be 1.576 W/m2 and the wave direction will be 1.4597 rad.
To know more about radar antenna:
https://brainly.com/question/27733312
#SPJ4
Consider two identical rods with lengthLand uniformly distributed massM. The rods are not pinned down, they are free to move both translationally and rotationally. Initially, the center of mass of each rod is stationary, but the left rod is rotating clockwise around its center with an angular speedω0(the right rod is not rotating): The ends of the rods collide. After the collision, the left rod moves directly up towards the top of the page with a speedv, and is no longer rotating around its center: If the collision is elastic, find expressions for the following quantities: - the speedv
- the final translational velocity of the center of mass of the right rod - the final angular velocity of the right rod around its center Express your answers in terms ofω0,L, and numerical factors.
The centre of mass of the right rod has a final translational velocity of MWo2/12. The right rod's final angle of rotation about its centre is ML2/12.
Ordinary velocity, expressed in metres per second, is what translational velocity is. Tangential velocity is the part of ordinary (translational) velocity that is in the tangential direction. For instance, if a rigid body is rotating about a fixed axis at an angular velocity of radians per second, any point r metres away from the axis will have a purely tangential velocity of r metres per second. The speed at which the angular location or orientation of an item varies is represented by a pseudovector in physics as angular velocity or rotational velocity ( or ), also called an angular frequency vector.
Iz = Ix+Iy
Ix = iy
Iz = 2Ix
(ML^2/6)/2 = ML^2/12
the final angular velocity of the right rod around its center is ML^2/12.
Learn more about velocity here
https://brainly.com/question/18084516
#SPJ4
Figure shows three forces applied to a trunk that moves leftward by 3.00 m over a frictionless floor. The force magnitudes are F 1
​
=5.00 N,F 2
​
=9.00 N, and F 3
​
=3.00 N. and the indicated angle is θ=60.0 0
. During the displacement,
(a) what is the net work done on the trunk by the three forces?
(b) does the kinetic energy of the trunk increase or decrease?
The net work done on the trunk by the three forces is 1.50J and the kinetic energy of the trunk will increase
The data given in the question is:
F 1 =5.00N,
F2 =9.00N,
F3 =3.00N,
θ=60°
d=3m
Work done by each force can be found as
We know that, work done by a force is given by:
W =F d cosϕ,
where ϕ is the angle between Force and displacement vectors.
F₁ is in the direction of the displacement.
So,
W₁=F₁dcosϕ
=(5.00N)(3.00m)cos0°
=15.0J.
Force F₂ makes an angle of
ϕ ₂=180°−θ
=180° −60°
=120°
with the displacement i.e. in negative x direction.
So,
W₂=F₂dcosϕ₂
=(9.00N)(3.00m)cos120°
=−13.5J.
Force F₃ is perpendicular to the displacement.
So, W₃=F₃dcosϕ
=(3.00N)(3.00m) cos90°
=0J
Net Work done by three forces is
As work is a scalar quantity, so total work done will be the algebraic sum of all the individual works.
So, W=W₁+W₂+W₃
=15−13.5+0
=+1.50J.
According to Work energy theorem, total work done on a system equal the change in kinetic energy of the system.
Here, a positive work of 1.5 Joules is done on the trunk, so its Kinetic Energy will increase by 1.5 Joules.
Figure was missing it is attached with the answer
To look more about force click here
brainly.com/question/13191643
#SPJ4
If offspring is made asexually, how do they compare to the parent?
Answer: They will be an exact copy of the parent
Explanation:
Nathalie, Selene, and Ella are playing tug-of-war, fighting over a .30 kg water bottle. Nathalie is pulling to the left with 85 N of force and Selene and Ella are both pulling to the right – Selene is pulling with 75 N of force. If the water bottle accelerates to the left at 2.0m/s2
A.Fnet on water bottle
B. FElla
The net force on the bottle is 6 N and the force exerted by Ella is 4 N.
We know the formula given by sir Issac Newton, which is, F = ma.
This formula means Force is equal to the mass of the particle times the acceleration of the particle.
So in this case the acceleration of the particle is given as 2 m/s.
The mass of the given particle is 3 kg.
Hence, the force on the particle is 3 X 2 = 6 Newtons.
In our case, the particle is a water bottle, hence the F net on the water bottle is 6 N.
Now, as the net force experienced by the bottle is 6 Newtons,
F Nathalie - F Selene -F Ella = 6N
85-75- F Ella =6 N
=> F Ella =4 N
To learn more about Newton Dynamics and Force and acceleration refer to the following link - https://brainly.com/question/21588598
a piston a has a diameter of 0.81 cm, as shown. a second piston b has a diameter of 4.0 cm. a b 578.8 n f in the absence of friction, determine the magnitude of the force f~ necessary to support the 578.8 n weight. answer in units of n.
11.7 N of force is needed to hold the weight m on Piston 2.
What are example and force?Force is the term used to describe a body's tendency to change or modify its state as a result of an external cause. When force is applied, the item can also alter its size, shape, and direction. kick a ball, pushing and pulling on the door, or kneading dough are a few examples.
Briefing:
The force required to support weight, m on Piston 2 is calculated from Pascal's principle as follows:
P₁ = P₂
where P₁ is pressure on Piston 1 = F₁/A₁
P₂ is pressure on Piston = F₂/A₂
F₁/A₁ = F₂/A₂
F₂ is the force on Piston 2 = 1189 N
A₁ is Area 1 = πr²
where r = d/2
A₁ = π * (0.81/2 *1/100)²
A₁ = 40.5* 10⁻⁵ m²
F₁ is the force on piston 1 = ?
A₂ is area 2
A₂ = π * (4.0/2 *1/100)²
A₂ = 2 * [tex]10^{-2}[/tex] m²
F₁ = A₁ * F₂/A₂
F₁ =40.5* 10⁻⁵ m² * 578.8 N / 2 * [tex]10^{-2}[/tex]m²
F₁ = 11.7N
To know more about force visit:
https://brainly.com/question/13191643
#SPJ4
Most of the mass of our Galaxy lies
a) in the bright spiral arms.
b) between Earth and the Galactic center.
c) outside the luminous part of the Milky Way Galaxy.
d) within the bulge.
e) at the galactic center.
c) outside the luminous part of the Milky Way Galaxy.
While much of the mass of our Galaxy lies within the bright spiral arms, the majority of the mass actually lies outside the luminous part of the Milky Way Galaxy.So the correct option is c.
The Milky Way Galaxy is a vast and expansive collection of stars, gas and dust that spans the universe. It is estimated to contain between 200 and 400 billion stars, making it one of the largest galaxies in the universe. The Milky Way is a spiral galaxy, meaning that it is composed of a central bulge surrounded by four main spiral arms. The luminous part of the Milky Way Galaxy, which is visible from Earth, lies within the spiral arms.
However, the majority of the mass of our Galaxy does not lie within the luminous part of the Milky Way Galaxy. Instead, much of the mass of the Milky Way lies outside the visible part of our Galaxy. This mass is found in the form of dark matter, which is an invisible form of matter that does not emit any light. Dark matter makes up around 85 percent of all the matter in the Universe and is believed to be responsible for the structure and evolution of galaxies.
The rest of the mass of our Galaxy is located within the bulge at the center of the Milky Way, as well as between Earth and the Galactic center. This mass is made up of stars, gas, dust and other forms of matter. While much of the mass of our Galaxy is invisible, it is still an important component of the Milky Way. Without this mass, the structure and evolution of the Milky Way would be drastically different.
Learn more about Galaxy at :https://brainly.com/question/24836631
#SPJ4