Balance the following chemical equation and determine the number of moles of Fe(s) produced when 8.1E-1
moles of Fe2O3(s) react with excess C(s) to produce Fe(s) and CO2(g).
Fe2O3(s) + C(s) ——)Fe(s) + CO2(g)

Answer:

1027.9 mL, its easy

Explanation:

Answer:

 A Chart Of The Chemical Elements That Displays Them In Rows Horizontally In Order Of Increasing Atomic Number And Vertically According To Similarity Of The Chemical Properties Of Their Atoms.

..........................

Chromium exhibits a wide range of possible oxidation states, where the +3 state is the most stable energetically. The +3 and +6 states are the most commonly observed in chromium compounds, whereas the +1, +4 and +5 states are rare.

Answer:

The nuclear reaction could be controlled and maintained.

Explanation:

People had initiated a self-sustaining nuclear reaction--and then stopped it. He had released the energy of the atom's nucleus and controlled that energy.

Fermi's achievement in setting off the first self-sustaining nuclear chain reaction from his design of an atomic pile led to a new Age of the Atom. The controlled release of nuclear energy was now a reality

Answer:

I think it s the third one

BTW yw if it's correct

Answer:

yes, it's possible to covert molecule to molecule

Explanation:

Converting between molecules and moles is done by either multiplying by or dividing by Avogadro's number.

hope it helps.

plz mark me as brainliest

have a great day ahead

Explanation:

Cyclic Hydrocarbons

A cyclic hydrocarbon is a hydrocarbon in which the carbon chain joins to itself in a ring. A cycloalkane is a cyclic hydrocarbon in which all of the carbon-carbon bonds are single bonds. Like other alkanes, cycloalkanes are saturated compounds. Cycloalkanes have the general formula CnH2nCnH2n. The simplest cycloalkane is cyclopropane, a three-carbon ring.

Explanation:

thermoplastic polymer

Answer:

From Middle school to college

Answer:

So, the melting of wax and vapourisation of melted wax are physical changes. Chemical Changes : The wax near flame burns and gives new substances like carbon dioxide, carbon soot, water vapour, heat and light. LPG is another example of a familiar process in which both the chemical and physical changes take place.

Answer:

1)A moth bursting out of a cocoon is neither a chemical or physical change, it's a biological change.  If I had to chose it would be a physical change though.  Not to sure...

2)Playing with slime is a physical change.  

Explanation:

1)The reason why I would chose physical change is because the moth is changing it's physical state more than it's chemical composition, but you should say both if that's an option.  

2)A physical change is when the temperature, shape, or state of matter changes. A chemical change occurs when the actual substance changes.  An example of this is a chemical reaction.  Because the slime is changing shape and not substances, I would say that it's obviously a physical change.  

Hope this helps, sorry that I'm not too sure about the 1st question.  

Answer:

a

b

d

c

a

Explanation:

hope helpful pls give brainliest

Answer:

Hey if its up tomorrow I can I can’t rn sorry :(

Explanation:

Answer:

Calcium Nitrate is made up of three different elements and contains a total of nine atoms. This compound's formula is Ca(NO3)2. There is one calcium atom, two nitrogen atoms, and there are six oxygen atoms in calcium nitrate

Answer:

3.

Explanation:

potassium

bromine

oxygen

Answer:

Changes of state are physical changes. They occur when matter absorbs or loses energy. Processes in which matter changes between liquid and solid states are freezing and melting. Processes in which matter changes between liquid and gaseous states are vaporization, evaporation, and condensation.

hope this helped

Answer:

what the model is describing is the molecules. when molecules are tightly packed they form a solid like ice, and when the ice is melting forms a liquid because the molecules are spreading out. when the ice evaporates (gas) the molecules are moving about and are not touching eachother

Answer:

Mark me as a Brainliest

Due to the fact that electrons are delocalized in graphite, it is a good conductor of electricity. Carbon atoms in graphite form hexagonal layers and are in covalent bonds with three other carbon atoms. Due to this non-bond electron configuration, each carbon atom conducts electricity in the form of a delocalized electron.

Answer:

Solid

Explanation:

According to Wikipedia

Deposition is the phase transition in which gas transforms into solid without passing through the liquid phase. Deposition is a thermodynamic process. The reverse of deposition is sublimation and hence sometimes deposition is called desublimation.

Answer:

1.6 M.

Explanation:

We want to find the molarity of a solution that contains 114.4 g NaCl in a 1.2 L solution.

Recall that molarity is given by:

[tex]\displaystyle \text{M} = \frac{\text{ mols solute}}{\text{ L soln.}}[/tex]

Convert 114.4 g NaCl to mol NaCl using its molecular weight:

[tex]\displaystyle 114.4 \text{ g NaCl} \cdot \frac{1 \text{ mol NaCl}}{58.44 \text{ g NaCl}} = 1.958\text{ mol NaCl}[/tex]

Therefore, the molarity of the solution will be:

[tex]\displaystyle \text{M} = \frac{1.958 \text{ mol NaCl}}{1.2\text{ L soln.}} = 1.6 \text{ M}[/tex]

In conclusion, the molarity of the solution is 1.6 M.

Gasoline in water = insoluble

acetone in nail polished = soluble

salt in alcohol = soluble

oil in vinegar = insoluble

tawas in water = soluble...

Sorry if i am incorrect......

Explanation:

equations to note:

density= mass/volume

mass= volume *density

volume= mass/density

you have a volume- 8.33cm3

you have a density- 2.07 g/cm3

Answer:

8.33cm3 * 2.07g/cm3=  17.24g

mass= 17.24g

Answer:

5.2M, 5M, 0.975M, 28M

Explanation:

M = ( moles × 1000 ) ÷ volume

Molarity is affected by temperature. Its unit is mole/litre. It measure the concentration of any solute in a solution. Thus the molarity of [tex]KNO_{3}[/tex],[tex]BaCl_{2}[/tex],[tex]Na_{2}CO_{3}[/tex] and[tex]C_{6}H_{12}O_{6}[/tex] are 5.2mol/litre, 5mol/litre, 0.97mol/litre, 28mol/litre respectively.

Molarity can be calculated by dividing  number of moles of solute by volume of solution in liter.

Other concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution

Mathematically,

Molarity= number of moles of solute/volume of solution in litre (1)

1) Molarity of [tex]KNO_{3}[/tex]= {1.30 mol ×(1000ml/l)}÷250.0 mL=5.2mol/litre

2)Molarity of [tex]BaCl_{2}[/tex]= {0.500 mol  ×(1000ml/l)}÷100.0 mL=5mol/litre

3)Molarity of[tex]Na_{2}CO_{3}[/tex]= {0.195 mol   ×(1000ml/l)}÷200.0 mL=0.97mol/litre

4)Molarity of [tex]C_{6}H_{12}O_{6}[/tex] = {7.00 mol  ×(1000ml/l)}÷ 250.0 mL=28mol/litre

Thus the molarity of [tex]KNO_{3}[/tex],[tex]BaCl_{2}[/tex],[tex]Na_{2}CO_{3}[/tex] and[tex]C_{6}H_{12}O_{6}[/tex] are 5.2mol/liter, 5mol/litre, 0.97mol/litre, 28mol/litre respectively.

Learn more about Molarity, here:

https://brainly.com/question/16727614

#SPJ2

Answer:

फ्य्फ्य्क्ज्य्य्क्सुग्किग्क्सिगिदित्फ

[tex]\\ \sf\longmapsto Volume=\dfrac{Mass}{Density}[/tex]

[tex]\\ \sf\longmapsto Volume=\dfrac{212}{0.85}[/tex]

[tex]\\ \sf\longmapsto Volume=249.4mL[/tex]

Answer:

[tex]249.41 \: ml[/tex]

Explanation:

[tex]volume = \frac{mass}{density} \\ = \frac{212g}{0.85 \: g \: {ml}^{ - 1} } \\ = 249.41 \: ml[/tex]

Hope this helps you.

Let me know if you have any other questions :-):-)

Explanation:

18 A

19 C

20 C

22 A

24 B

hope this helps you.

The gas that is to be identified in the problem is C2H2

From the ideal gas equation;

PV = nRT

P = pressure of the gas = 745 torr or 0.98 atm

V = volume of the gas =  4.13 mL or 0.00413 L

n = number of moles of the gas = ?

R = gas constant = 0.082 atm Lmol-1K-1

T = temperature of the gas = 23°C + 273 = 296 K

n = PV/RT

n = 0.98 atm ×  0.00413 L/0.082 atm Lmol-1K-1 × 296 K

n = 0.00405/24.272

n = 0.000167 moles

Recall that;

Number of moles = mass/molar mass

molar mass = mass/Number of moles

molar mass = 0.00500-gram/0.000167 moles

molar mass = 30 g/mol

Since it is a hydrocarbon;

[12 +1]n = 30

n = 30/13

n = 2

The gas is C2H2

Learn more:https://brainly.com/question/9743981