Answer:
manganese dioxide, is a solid chemical compound that is typically not able to conduct electricity when it is in its solid form. This is because the structure of solid manganese dioxide is made up of a network of strong covalent bonds between the manganese and oxygen atoms. These covalent bonds are very stable and do not allow electrons to flow freely through the compound, which is necessary for the conduction of electricity.
However, when manganese dioxide is melted or dissolved in a solvent, the covalent bonds are broken and the electrons become more mobile. This allows the electrons to flow more freely through the compound, enabling it to conduct electricity.
In summary, manganese (IV) oxide is not able to conduct electricity in its solid form due to the strong covalent bonds between its atoms, which do not allow electrons to flow freely. However, when it is in its molten or solution form, the covalent bonds are broken and the electrons become more mobile, allowing the compound to conduct electricity.
a plot of PV/RT against Pext gives a lower value than the ideal at moderate pressures and a higher value than the ideal at very high pressures for most gases. select all the statements that correctly account for this behavior
-at low pressures gas particles repel each other
-at very high pressures the molecular volume of the gas particles is significant
-at low temps, the gas particles are moving at slower velocities
-at moderately high pressures there are significant intermolecular attractions
-at very high pressures, the molecular volume of the gas particles is significant
-at moderately high pressures there are significant intermolecular attractions
At very high pressures, the molecular volume of the gas particles is significant.At moderately high pressures there are significant intermolecular attractions is the statements that correctly account for this given behavior.
An equation of states is PV = nRT. Three variables are P, V, and T. They are variables because they indicate the pressure, volume, and temperature of a gas in a certain condition as well as other physical characteristics. The ideal gas constant (R) is a constant that may be found in chemical literature, and the number of moles (n) may be maintained constant. Moles (n) may be set to PV / RT as follows: n = PV / RT. T / V ratio becomes important because pressure (P), which is directly proportional to T and indirectly proportional to V, depends on it.Volume (V) is a function of T/P, with V being directly proportional to T and indirectly proportional to P. PV is a necessary condition for temperature (T), which is directly proportional to variations in both P and V.
To know more about ideal gas constant please click on the link brainly.com/question/3961783
#SPJ4
______ in a white, crystalline solid at room temperature that is soluble in water, has low melting and boiling points, and held together through covalent bonds. a. Baking soda b. Butter
c. Granulated sugar
d. Table salt
At room temperature, granulated sugar is a white, crystalline solid that is soluble in water, has a low melting and boiling point, and is bound together by covalent bonds.
What types of solids have crystal lattices?
Crystalline solids are made up of atoms, polymers, or ions that are arranged in a predictable, three-dimensional pattern. Solids that have a crystal structure include quartz, diamonds, sodium chloride, and others.
What are the characteristics of a crystalline solid?
Solids with crystalline structures have conventional geometries. In these kinds of solids, atoms, molecules, or ions are arranged in long-range order throughout the 3-dimensional network of a crystal. Sodium chloride, quartz, diamond, etc. are few examples. Crystalline solids' characteristics.
To know more about crystalline solid visit:
https://brainly.com/question/28274778
#SPJ4
assuming that the uranium atoms are spherical and that their metallic radius is such that their size is determined by the unit cell dimensions (i.e., equal size spheres that touch each other as constraint by the unit cell) determine the metallic radius of uranium atoms at room temperature.
Uranium is often known as a silvery-white metal in the actinide series of the periodic table. Uranium is softly radioactive because all isotopes of uranium are unstable, with half-lives varying between 159,200 years and 4.5 billion years.
Uranium has the giant atomic weight of the primordially occurring elements and Its hardness is about 70% higher than that of lead and slightly lower than that of gold or tungsten.
Uranium is often found at low levels (a few ppm – parts per million) in all rocks, soil, water, plants, and animals (including humans). generally, Uranium occurs also in seawater and can be recovered from the ocean water.
Significant concentrations of uranium occur in some elements such as uraninite (the most common uranium ore), phosphate rock deposits, and other minerals.
Uranium is a chemical element with atomic number 92 which means there are ninety-two protons in its nucleus.
There are a total number of protons in the nucleus is called the atomic number of the atom and is denoted by the symbol Z. The total amount of electrical charge of the nucleus is, therefore, +Ze, where e (elementary charge) equals 1,602 x 10-19 coulombs.
To know more about Uranium:
https://brainly.com/question/5688204
#SPJ4
determine the oxidation numbers of each of the elements in the following reaction, and identify which of them, if any, are oxidized or reduced.
When an atom's oxidation number rises, the reducing agent reduces the atom, and when it falls, the oxidising agent reduces the atom. The oxidising agent is the atom that is reduced, while the reducing agent is the atom that is oxidised.
What does the number +3 oxidation mean?For instance, the oxygen ion O2+ has an oxidation number of 2 because it can contribute two electrons, whereas the iron ion Fe3+ has an oxidation number of +3 because it can take up three electrons to establish a chemical bond.
Electrons are lost during oxidation. An rise in the substance's oxidation state results from the loss of negative charge. Fe atoms become oxidised to Fe2+ ions after losing two electrons.
Learn more about oxidation number refer
https://brainly.com/question/13182308
#SPJ4
draw the lewis structure for monochloramine, which is a covalent compound with the formula nh2cl. include all nonbonding electrons, such as lone pairs, and any nonzero formal charges.
Lewis structures are used to show the arrangement of electrons around the valence shell of atoms present in the molecules.
A Lewis dot structure is composed of dots and symbols of the elements. The Lewis structure shows the electrons present on the valence shells of atoms in molecules. We can easily deduce the number of valence electrons in a molecule by simply counting the number of electrons from the molecule.
The Lewis structure of NH₂Cl is clearly shown in the image attached. The lone pairs of electrons are shown by using dots while the bond pairs are shown by using a single dash.
Learn more about Lewis dot structure from the link given below.
https://brainly.com/question/29611367
#SPJ4
note the number of atoms of carbon in pyruvic acid and explain why three molecules of carbon dioxide are produced.
Each molecule of pyruvic acid has three carbon atoms, while each molecule of carbon dioxide only has one.
Why are there three carbon dioxide molecules created?Explanation: If we start with one molecule of pyruvate, three carbon dioxide molecules are created during cellular respiration. The first is created by pyruvate dehydrogenase's intermediate step, which transforms pyruvate into acetyl-CoA. When D-isocitrate is changed into alpha-ketoglutarate, the second is created.
Why just three bonds can carbon form?If a quadruple bond were to form, it would point away from the two carbon atoms. The other three bonds would need to be severely bent in order for this bond to exist, which is extremely inefficient in terms of energy. Thus, the creation of the quadruple bond is prevented by this strain.
Learn more about redox reaction here:
https://brainly.com/question/13293425
#SPJ4
Rust (Fe2O3) forms on abandoned cars such as the one in this photo through a series of reactions between iron in the car and oxygen inte atmosphere. 168 The unbalanced chemical equation for this reaction is Fe(s) + O2(g) ? Fe2O3(s) 4th attempt ns (2 points) part 1 dize t is ox o5 men
12 electrons are transferred in this oxidation–reduction reaction.
What is oxidation-reduction reaction?
Reduction-oxidation is referred to as redox, and a redox reaction is one in which both a reduction reaction and an oxidation reaction occur at the same time. Additionally, it is an acronym for an oxidation-reduction reaction. Let's first talk about each of these two elements independently before returning to how they interact to form a complete redox reaction.
The balanced reaction is
4 Fe (s) + 3 O2 —> 2 Fe2O3 (s)
Oxidation state of Fe changes from 0 to +3 and there are 4 such Fe.
So, it loses 4*3 = 12 electrons
Oxidation state of Oxygen changes from 0 to -2 and there are 6 such Oxygen.
So, it gains 6*2 = 12 electrons
Hence, we can say that 12 electrons are transferred.
To learn more about oxidation-reduction reaction from the given link.
https://brainly.com/question/13892498
#SPJ4
Complete question:
Rust (Fe2O3) forms on abandoned cars such as the one in this photo through a series of reactions between iron in the car and oxygen in the atmosphere.
The unbalanced chemical equation for this reaction is
Fe(s) + O2(g) –> Fe2O3(s)
How many electrons are transferred in this oxidation–reduction reaction?________ electrons
classify the protein images as representing the primary structure, secondary structure, tertiary structure, or quaternary structure of a protein.
The sequence of amino acids in a polypeptide chain is the most basic level of protein structure, known as primary structure. Insulin, for example, has two polypeptide chains. Each chain has its own set of amino acids that are assembled in a specific order.
Secondary structure is the next level of protein structure and refers to local folded structures that form within a polypeptide as a result of interactions between backbone atoms.The helix and the pleated sheet are the two most common types of secondary structures.
A polypeptide's overall three-dimensional structure is referred to as its tertiary structure. The tertiary structure of the protein is primarily due to interactions between the R groups of the amino acids that comprise it. Hydrogen bonding, ionic bonding, dipole-dipole interactions, and London dispersion forces are all examples of R group interactions that contribute to tertiary structure. R groups with like charges, for example, repel one another, whereas those with opposite charges can form an ionic bond.
learn more about protein here
https://brainly.in/question/25310342
#SPJ4
Single alkenes do not show up very well on TLC under UV, even when indicators are used. Propose a stain that could be used to visualize your product on a TLC plate.
UV light is the most popular non-destructive visualization technique for TLC plates. stains from thin layer chromatography.
To see TLC findings for colorless substances, a visualizing approach is required. It will provide a means of seeing these chemicals as well as a Single alkenes do not show up very well on TLC under UV, even when markers are applied, hence this procedure is known as staining the TLC plate. Offer a stain that might be utilized to help a TLC viewer see your goods. Normally, a UV (Ultraviolet) lamp is required to see the various spots, but if the compounds are brightly colored, It is possible to conduct both qualitative and quantitative analyses using thin layer chromatography. Excellent wettability for accurate colorization outcomes.
to know more about TLC plates please visit.
https://brainly.com/question/17562109
#SPJ4
the isotope carbon-14 decays to nitrogen-14 over a half-life of 5,730 years. these isotopes could be used to determine the age of rocks formed early in the cenozoic era, approximately 60 million years ago.
FALSE, the isotope carbon-14 decays to nitrogen-14 over a half-life of 5,730 years. these isotopes could be used to determine the age of rocks formed early in the cenozoic era, approximately 60 million years ago.
Having the chemical symbol C and atomic number 6, carbon is an element with the meaning "coal" in Latin. It is nonmetallic and tetravalent, meaning that four of its atom's electrons may be used to create covalent chemical connections. The periodic table's group 14 is where it belongs. Only 0.025 percent of the crust of the Earth is made up of carbon. The bond sequence affects a bond's strength. Because shorter bonds have a higher bond strength than longer bonds, the higher the bond order, the stronger the bonds are. The bond order of carbon dioxide is 2, that of carbon monoxide is 3, and that of the carbonate ion is 1.33.
Learn more about carbon here:
https://brainly.com/question/22530423
#SPJ4
a. Consider the reaction
Fe(s) + 2HCl(aq) --> FeCl2(s) + H2(g)
Using standard thermodynamic data at 298K, calculate the entropy change for the surroundings when 2.13 moles of Fe(s) react at standard conditions.
S°surroundings = ____ J/K
b. Consider the reaction
C2H4(g) + H2O(g) --> CH3CH2OH(g)
Using standard thermodynamic data at 298K, calculate the entropy change for the surroundings when 2.23 moles of C2H4(g) react at standard conditions.
S°surroundings = ___ J/K
i) Entropy change for the surroundings when 2.13 moles of Fe(s) react at standard conditions is 52.89 K/J.
According to Hess law, “at constant temperature, heat energy changes (enthalpy – ΔHrec) accompanying a chemical reaction will remain constant, irrespective of the way the reactants react to form product”.
Heat of reaction = sum of heats of reaction of products - sum of heats of reaction of reactants or
ΔH0rxn = ∑n×ΔHf0(products)−∑n×ΔHf0(reactants)
= ΔHf0 FeCl2(s) + ΔHf0 H2(g) - (ΔHf0 Fe(s) + 2 *ΔHf0 HCl(aq))
= (-341.8 KJ + 0 KJ)-(2*-167.2 KJ+1*0 KJ)
= -7.4 KJ
the enthalpy change when 2.13 moles of Fe(s) react at standard conditions = 2.13(-7.4) KJ = -15.762 KJ
ΔS°surroundings = -ΔH0rxn /T
= -(-15.762 KJ)/298 K
= 52.89 J/K
ii) Entropy change for the surroundings when 2.23 moles of C2H4(g) react at standard conditions is 341.2 J/K.
According to Hess law,
ΔH0rxn = ∑n×ΔHf0(products)−∑n×ΔHf0(reactants)
= ΔHf0 CH3CH2OH(g) - (ΔHf0 C2H4(g) + ΔHf0 H2O(g)))
= (-235.1 KJ)-(52.3 KJ+(-241.8 KJ)
= -45.6 KJ
the enthalpy change when 2.23 moles of C2H4(g) react at standard conditions = 2.23(-45.6) KJ = -101.688 KJ
ΔS°surroundings = -ΔH0rxn /T
= -(-101.688 KJ)/298 K
= 341.2 J/K
To learn more about Entropy Change visit:
https://brainly.com/question/15016615
#SPJ4
1. the concentrations of the I-, IO3-, and H3AsO3 using m1v1=m2v2
2. calculate the initial concentration of [H+] in the solition for each experiment
3 . As well as using the [H3AsO3] and measured time to calculate the rate for each experiment
•rate law
•rate constant
the concentrations of the I-, IO3-, and H3AsO3 using m1v1=m2v2 is 2.2867 x 10^6, The initial concentration of [H+] in the solition for each experiment is 0.976 x 10^6, The rate of reaction is 2.7427 x 10^-
substance's concentration is the sum of solute in a provided amount of solution. Molarity is the amount of moles of solvent in one volume of water and is used to express concentrations. A solution's concentration is described as the quantity of solute present in a provided amount of solution. It can be stated as follows: Mass by a solution's mass percentage =mass of solutemass of solution 100 . The rate at which a chemical reaction occurs is defined as commensurate to an increase in the amount of a product per unit time and the reduce in the amount of a reactant per unit time. The rates of reaction could really vary greatly.
Learn more about concentration here:
https://brainly.com/question/10725862
#SPJ4
At equilibrium a mixture of n2, h2, nh3 gas at 500◦c is determined to consist of 0.602 mol/dm³ of n2, 0.420 mol/dm³ of h2, and 0.113 mol/dm³ of nh3. what is the equilibrium constant for the reaction
N2(g) + 3H2(g) 2NH3 is the reaction's balanced equation (g)
The equation for the reaction's equilibrium constant, k, is k = [NH3(g)]2 / [N2(g)].[H₂(g)]
The concentrations in the sample are in an equilibrium state. So, we may just utilize those in the computation.
0.184 mol/L= [NH3(g)]
0.551 mol/L= [N2(g)]
0.4 mol/L= [H2(g)]
Applying the equation, k = (0.184 mol/L)2 / ((0.551 mol/L) x (0.400 mol/L)3), yields k = 0.960 mol2 L2.
As a result, the reaction's equilibrium constant at 500 °C is 0.960 mol2 L2
To learn more about equilibrium click the link
https://brainly.com/question/517289
#SPJ1.
A 22.02 ml solution containing 1.615 g of magnesium nitrate is mixed with a 28.64 ml solution containing 1.073 g of sodium hydroxide. a precipitate forms. calculate the total concentration of ions remaining in solution after the reaction is complete. assume that the volumes are additive.
The total concentration of ions remaining in the solution is 0.0007 M.
To solve this problem, we need to determine the concentration of both magnesium nitrate and sodium hydroxide before the solutions are mixed, and then use the reaction between magnesium nitrate and sodium hydroxide to determine the concentration of ions remaining in solution after the reaction is complete.
To calculate the total concentration of ions remaining in solution after the reaction is complete, we need to first determine the number of moles of each reactant present before the reaction occurs. To do this, we can use the molar mass of each compound to convert the mass of each compound to moles.
First, we can calculate the number of moles of magnesium nitrate present in the 22.02 mL solution:
Number of moles of magnesium nitrate = (1.615 g magnesium nitrate) / (148.32 g/mol magnesium nitrate) = 0.0109 moles magnesium nitrate
Next, we can calculate the number of moles of sodium hydroxide present in the 28.64 mL solution:
Number of moles of sodium hydroxide = (1.073 g sodium hydroxide) / (40.00 g/mol sodium hydroxide) = 0.0268 moles sodium hydroxide
Now that we know the number of moles of each reactant, we can use the balanced chemical equation for the reaction between magnesium nitrate and sodium hydroxide to determine the number of moles of each product that will be formed:
Magnesium nitrate + Sodium hydroxide -> Magnesium hydroxide + Sodium nitrate
1 mole magnesium nitrate + 1 mole sodium hydroxide -> 1 mole magnesium hydroxide + 1 mole sodium nitrate
Since we have 0.0109 moles of magnesium nitrate and 0.0268 moles of sodium hydroxide, the number of moles of each product that will be formed is also 0.0109 moles for magnesium hydroxide and 0.0268 moles for sodium nitrate.
Finally, we can use the number of moles of each product and the total volume of the solution to calculate the concentration of each product in the solution. The total volume of the solution is 22.02 mL + 28.64 mL = 50.66 mL.
The concentration of magnesium hydroxide in the solution is:
(0.0109 moles magnesium hydroxide) / (50.66 mL solution) = 0.0002 M magnesium hydroxide
The concentration of sodium nitrate in the solution is:
(0.0268 moles sodium nitrate) / (50.66 mL solution) = 0.0005 M sodium nitrate
The total concentration of ions remaining in the solution after the reaction is complete is the sum of the concentration of the magnesium ions and the concentration of the sodium ions. The concentration of the magnesium ions is 0.0002 M, and the concentration of the sodium ions is 0.0005 M, so the total concentration of ions remaining in the solution is 0.0002 M + 0.0005 M = 0.0007 M.
Learn more about solution, here https://brainly.com/question/7932885
#SPJ4
The student performs a second titration using the 0.10MNaOH(aq) solution again as the titrant, but this time with a 20.mL sample of 0.20MHCl(aq) instead of 0.10MHCl(aq).
1. The box below to the left represents ions in a certain volume of 0.10MHCl(aq). In the box below to the right, draw a representation of ions in the same volume of 0.20MHCl(aq). (Do not include any water molecules in your drawing.)
2. graph in part (d), carefully draw a curve that shows the results of the second titration, in which the student titrates a 20.mL sample of 0.20MHCl(aq) with 0.10MNaOH(aq)
The box below to the left represents ions in a certain volume of 0.10MHCl(aq). In the box below to the right, representation of ions in the same volume of 0.20MHCl will contain eight dots and eight circles.
The student performs a second titration using the 0.10 M NaOH(aq) solution again as the titrant, but this time with a 20.mL sample of 0.20MHCl(aq) , instead of 0.10 M HCl. the square represents the 0.10 M HCl(aq) solution is contains four dots and the four circles.
Then the square representation of ions in the same volume of 0.20MHCl(aq) is eight dots and the eight circles. the image is attached below with representation of the sots and the circles.
To learn more about titration here
https://brainly.com/question/16187355
#SPJ4
robert boyle and robert hooke worked together and discovered some important physics concepts. their work lead to the formation of boyle's law; this describes the . flow of fluids in the body and lead to the formation of the humoral theory flow of fluids in the body and lead to the formation of the humoral theory movement of oxygen and lead to the discovery of how blood delivered oxygen to tissues movement of oxygen and lead to the discovery of how blood delivered oxygen to tissues relationship between blood flow and the heart rhythm and helped them discover how the heart works relationship between blood flow and the heart rhythm and helped them discover how the heart works relationship between pressure and air volume and led to the understanding of how respiration works relationship between pressure and air volume and led to the understanding of how respiration works
A fundamental property of chemistry called Boyle's Law describes how a gas behaves when it is kept at a constant temperature. The rule asserts that the volume of a gas is inversely proportional to the pressure it exerts at a certain temperature. Robert A. Boyle discovered this relationship in 1662.
This empirical relationship, which Robert Boyle, a scientist, first proposed in 1662, argues that, under constant temperature, the pressure (p) of a given amount of gas changes inversely with its volume (v); in equation form, this means that pv = k, a constant.
Blood flows into the syringe to balance the pressure difference since blood in a vein has a higher pressure than the gas in the syringe. One of the three gas laws that govern the behavior of gases is Boyle's law.
For more information on Boyle's law kindly visit to
https://brainly.com/question/24709149
#SPJ4
Can somebody help me, what's the name of this
The name of the organic compound shown is methylpropenaoate.
It is an alkanoate.
What are esters?Esters are organic compounds formed when an organic acid reacts with an organic base.
An example of an ester is alkanoates.
Alkanoates are formed when alkanoates, the alkanoic acids react with alkanols.
In hydrogen ion, an alkanoic acid reacts with the hydroxide ion of the alkanol to form water and the alkanoates are formed as well from the remaining moieties of the alkanol and the alkanoic acids.
The molecule whose structure is shown is an alkanoate.
Learn more about alkanoates at: https://brainly.com/question/29092307
#SPJ1
in the citric acid cycle (see the figure), beginning with one molecule of isocitrate and ending with fumarate, how many atp molecules can be made through substrate-level phosphorylation?
In the citric acid cycle , beginning with one of the molecule of isocitrate and ending with the fumarate, the ATP molecules can made through the substrate-level phosphorylation is one molecule.
In the citric acid cycle, the substrate level phosphorylation is the high energy of the phosphate group in the organic molecule. it transfers to the ADP to produces the ATP. it is the metabolic reaction and form the ATP molecules. The citric acid cycle is called as Krebs cycle also.
Thus, the number of ATP molecules form during the citric acid cycle that start with the one molecule of the isocitrate and end with the fumarate is the one molecule.
To learn more about citric acid cycle here
https://brainly.com/question/13030117
#SPJ4
calculate the final velocity of each particle when they reach the negative plate, assuming they both started from rest
The final velocity of particle B when it reaches the negative plate is 2.318×10^6 m/s.
According to the work-energy theorem work done by the particle is equal to an increase in kinetic energy
Given
Mass of particle A is m(A)= 5×10^-30 kg
Charge on particle A q(A)= 1.6×10^-19 C
V1=40 volt and V2= -100 volt
Work done by particle A is ∆E=q(A)(V1-V2).
∆E=1.6×10^-19*×(40-(-100))=1.6×10^-19×140 jule
∆E=224×10^-19 joule
Let the velocity of particle A at the negative plate is v(A)
Kinetic energy of particle K.E=1/2×m(A)×v(A)^2
By the work-energy theorem ∆E=K.E
So. 1/2×5×10^-30×v(A)^2=224×10^-19
V(A)^2=8.96×10^12
V(A) = 2.993×10^6 m/s
The final velocity of particle A when it reaches the negative plate is 2.993×10^6 m/s
Now
Mass of partial B is m(B) =2.5×10^-29 kg
Charge of particle B is q(B)= 4.8×10^-19 C
Work done by particle B is ∆E= q(B)×(40-(-100)
∆E=4.8×10^-19×140 =672×10^-19 jule
Let the final velocity of a particle at the negative plate is v(B)
By applying the work energy theorem.
1/2×m(B)×v(B)^2= 672×10^-19
v(B)^2=537.6×10^10
V(B)=2.318×10^6 m/s
To learn more about kinetic and potential energy,
https://brainly.com/question/15764612
#SPJ4
which of the following can help initiate a sluggish grignard reaction? (select all that apply)a. waterb. a crystal of iodinec. a few drops of preformed grignard reagentd. a sonicatorb. a crystal of iodinec. a few drops of preformed grignard reagentd. a sonicator
a crystal of iodine, a sonicator, a few drops of performing Grignard reagent.
What is the purpose of a sonicator?Sonicators are high-frequency (20 kHz) devices that agitate particles in liquids using ultrasonic radiation.These tools are used to speed up a wide range of procedures, including sample preparation, cell disruption, cleaning, degassing, and mixing.
The sonicator principle is what?Small vacuum bubbles are formed in the liquid when low pressure is applied because this causes high-intensity ultrasonic waves to be created.In the high-pressure cycle, bubbles disintegrate as soon as they reach their saturation point.Cavitation is the name of this procedure.
To know more about grignard reaction visit:
https://brainly.com/question/19340479
#SPJ4
which of the following pairs of chemicals produce a buffer solution when dissolved in water (assume that chemicals are mixed in equal amounts)? (select all that apply.) and and (citric acid) and (succinic acid) and g
The chemical pair that will produce a buffer solution when dissolved in water is HNO2 and NaOH. (Option C)
A buffer solution refers to an aqueous solution which consists of a mixture of a weak acid and its conjugate base, or vice versa. A buffer solution is a solution whose pH only changes slightly when an acid or a base is added to it. For an acid-buffer solution, it consists of a weak acid and its conjugate base. For a basic-buffer solution, it consists of a weak base and its conjugate acid. The HNO2 and NaOH will form a buffer as it is a mixture of weak acid and its conjugate base.
Note: The question is incomplete. The complete question probably is: Which of the following chemical pairs produce a buffer solution when dissolved in water? A) NaOH and HBr B) NaCl and HCl C) HNO2 and NaOH D) NH3 and HCl.
Learn more about Buffer solution:
https://brainly.com/question/8676275
#SPJ4
Example 2:
=
(i) N2(g) + O2(g) →NO [8] ∆H (kJ)
=+90
2[g]
(i) NO [g] +0[g] →NO 2[g] ∆H (kJ)
=-56
(ii) 2NO 2[g] →N₂04[g]
ΔΗ (kJ)=-58
Evaluate AH for the reaction (iv) N2tg +202 [g] → N₂O4[gl
The ΔH of the reaction of the formation of N₂O₄ is equal to - 90 KJ.
What is Hess's law?Hess's law of constant heat summation can be defined as the total enthalpy change while the complete course of a chemical reaction independent of the sequence of steps.
Given, the reactions can be represented as:
N₂ (g) + O₂(g) → NO } ×1 ΔH = + 90 KJ
NO (g) + 1/2 O₂ (g) → NO₂ (g) } × 2 ΔH = -56 KJ
2NO₂ (g) → N₂O₄ (g) } × 1 ΔH = - 58 KJ
The overall reaction of the formation of N₂O₄ (g) can be obtained as:
N₂ (g) +2 O ₂ (g) → N₂O₄ (g)
ΔH = 1 × 90 + 2 ×(-56) + 2 × (-58)
ΔH = = - 90 KJ
Learn more about Hess's law, here:
brainly.com/question/14561923
#SPJ1
Calculate the amount of energy (in kJ) necessary to convert 450g of liquid water from 38°C to water vapor at 125 C. The molar heat of vaporization (Hvap) of water is 40.79 kJ/mol. The specific heat for water is 4.184 J/g C, and for steam is 1.99 J/g C. (Assume that the specific heat values do not change over the range of temperatures in the problem.)
total amount of energy required is= 132.6 + 717.9 + 45.42 = 896 kJ to convert 450g of liquid water from 38°C to water vapor at 125 C. The molar heat of vaporization (Hvap) of water is 40.79 kJ/mol. The specific heat for water is 4.184 J/g C, and for steam is 1.99 J/g C.
cslculation-heat energy required to raise the temp of liquid water to 100 C = 317 * 4.184 * 100 = 132632 J =132.6 kJ,mole of water = 317 / 18 = 17.6 mol,heat required for vaporization = 17.6 * 40.79 = 717.9 kJ,Heat required to raise the temp of water vapor to 172 C = 317 * 1.99 * 72 = 45420 J = 45.42 kJ, total heat required = 132.6 + 717.9 + 45.42 = 896 kJ. The quantity of heat necessary to increase the temperature of one unit mass of a substance by one degree Celsius. The specific heat capacity of a substance is specified as the amount of heat (J) soaked up per unit mass (kg) when its temperature rises 1 K (or 1 °C). The specific heat capacity of a substance is typically calculated by monitoring the heat capacity of a specimen of the material, generally with a calorimeter, and trying to divide by the sample's mass. The average kinetic energy of each molecule increases as the substance heats up.
Learn more about specific heat here:
https://brainly.com/question/11297584
#SPJ4
This data table shows how quickly rope will rot away in freshwater and saltwater. what can you conclude about the rates of the rotting reaction?
A. The reaction occurs more slowly when the concentration of salt is higher.
B. The reaction occurs more quickly when the concentration of salt is higher.
C. The reaction occurs at the same rater, regardless of the concentration salt.
D. There is not enough information to conclude anything about the reaction rates.
One can either conclude that the rope rotted quicker due to the presence of a higher concentration of salt in the ocean or that there is not enough information to make a conclusion. Options B and D.
Rate of reactionsFrom the available data in the table, it took the rope 10 years to rot in a lake water. Whereas, it took the rope 4 years to rot in an ocean water.
Also from the table, the average concentration of salt in the lake water is almost zero, whereas, the average concentration of salt in the ocean water is high.
Two things can be inferred from this reaction:
That the shorter time it took the rope to rot is due to the presence of high salt concentration in ocean water.There is not enough information to make any specific claim.In order to accept the first inference, we will assume that all other factors have been examined and kept constant except the concentration of salt in the two water bodies. This will also include that the same size of rope was used in the two water bodies.
Without the assumptions made in the first inference, there is not enough information to arrive at a specific conclusion.
Thus, both B and D are plausible options.
More on rate of reactions can be found here: https://brainly.com/question/28566775
#SPJ1
Calculate the pH for each of the following cases in the titration of 25.0 mL of 0.150 M pyridine, C5H5N(aq) with 0.150 M HBr(aq):
(a) before addition of any HBr
(b) after addition of 12.5 mL of HBr
(c) after addition of 19.0 mL of HBr
(d) after addition of 25.0 mL of HBr
(e) after addition of 33.0 mL of HBr
The pH in each case depends on the relative amounts of acid and base present.
a) Before the addition of HBr:
Number of moles = Mass of substance / Mass of one mole
Number of moles of C5H5N = 25/1000 L × 0.150 M = 0.00375 moles
pOH = -log[0.00375 M]
pOH = 2.42
pH = 14 - 2.42
pH== 11.58
b) After the addition of 12.5 mL of HBr:
Since the reaction is 1:1
Number of moles of HBr = 12.5/1000 L × 0.150 M = 0.00375 moles
The HBr is the limiting reactant
Amount of excess acid = 0.0045 M - 0.00375 = 0.00075 moles
Total volume of solution = 25mL + 12.5 mL = 37.5mL or 0.0375L
molarity of excess H+ = 0.000075 moles / 0.0375 L = 0.002 M
pH = - log[0.002M]
pH = 2.69.
c) After the addition of 19.0 mL of HBr:
Number of moles of acid = 19/1000 × 0.150 M = 0.00285 moles
Number of moles of excess acid = 0.0045 moles - 0.00285 moles = 0.000165 moles
Total volume of solution = 19.0 mL + 25.0 mL = 44mL or 0.044 L
Molarity of excess acid = 0.00018 moles/ 0.044 L = 0.00409 M
pH = -log[0.00409 M]
pH== 11.58
d) After the addition of 25.0 mL of HBr:
Number of moles of acid = 25/1000 × 0.150 M = 0.00375 moles
We have an equal number of acids and bases hence pH=11.65
e) After the addition of 33.0 mL of HBr:
Number of moles of acid = 33/1000 × 0.150 M =0.00495 moles
We can see that the base is the limiting reactant.
Number of moles of excess base = 0.00495 moles
Total volume of solution = 33 mL + 25 mL = 58mL or 0.058 L
Molarity of excess base = 0.00162 moles/0.058 L = 0.027 M
pOH = -log[ 0.027 M]
pOH = 1.56
pH = 14 - 1.56
pH- = 12.44
To know more about pH calculation:
https://brainly.com/question/15356078
#SPJ4
Which one of the following pairs cannot be mixed together to form a buffer solution?
a)C5H5N, C5H5NHCl
b)HC2H3O2, NaOH (C2H3O2- = acetate)
c)KOH, HI
d)NH2CH3, HCl
e)NaClO, HNO3
It is impossible to combine KOH and HI to create a buffer solution.
What is a buffer solution?A buffer solution, also referred to as a pH buffer or hydrogen ion buffer, is an aqueous mixture of a weak acid and its conjugate base, or vice versa. The pH scarcely changes at all when a small amount of a strong acid or basic is added to it. Buffer solutions are used in a wide range of chemical processes to keep pH values almost constant. Buffering is used by many living systems to regulate pH in the natural world. For instance, the bicarbonate buffering system regulates the pH of blood, and bicarbonate also acts as a buffer in the ocean.
The pH of a solution containing a buffering agent can only fluctuate within a specific range, regardless of what else may be in the solution. This is necessary for the enzymes in biological systems to function properly. For instance, the primary mechanism for maintaining the blood's pH between 7.35 and 7.45 is a blend of carbonic acid and bicarbonate found in the plasma component of human blood. Outside of this exact pH range, metabolic diseases called acidosis and alkalosis that finally end in mortality rapidly develop if the necessary buffering capacity is not immediately restored.
To learn more about buffer solutions visit:
https://brainly.com/question/24262133
#SPJ1
the compound c5h8o2 exists in two forms in equilibrium with one another. (lone pairs are not shown.) what change occurs in the hybrid orbital set used by the c atom labeled carbon 3?
An electron in a molecule behaves wave-like according to a function called a molecular orbital. Utilizing quantum mechanics, the molecular orbital theory defines the electrical structure of molecules.
What would an example of equilibrium look like?
There are several examples of equilibrium, such as: an open book that is lying flat. a moving object that is moving steadily a chemical reaction takes place where the rates of both the forward and reverse reactions are identical.
What is straightforward equilibrium?
A system is at an equilibrium when all of its external forces are in balance. When a system is in equilibrium, nothing changes.
To know more about equilibrium visit:
https://brainly.com/question/9813711
#SPJ4
Dark surfaces such as the black paper Response area more light and Response area than the lighter surfaces such as yellow or pink paper. A simple experiment that you could try is to place two bottles out in the sun. Place the black paper under one bottle and white paper under the other. After a few minutes, measure the temperature of the water in each bottle. The glass with the Response area paper on it should be hotter than the other bottle. Lighter surfaces Response area more light, that is why people wear lighter colored clothes in the Response area.
The darker surfaces receive high temperature, and less light, the lighter surface receives low temperature and more light.
What is temperature?
Temperature is a unit of measurement that can be expressed on a variety of scales, including Fahrenheit and Celsius. Temperature shows the direction of the spontaneous movement of heat energy, i.e., from a hotter body (one with a higher temperature) to a colder body (one at a lower temperature).
What is Dark surfaces ?
Black surfaces serve as effective heat radiators and absorbers. Any object's color is determined by the light it reflects. If an object reflects all the light that strikes it, it is said to be white. If an object reflects no or very little light and absorbs practically all of the light, it is said to be black.
Blocking the red, blue, and green lights produces cyan; blocking the green, red, and blue lights produces magenta; and blocking the blue, red, and green lights produces yellow. By switching off several light fixtures, you may create a similar effect.
Therefore, the darker surfaces receive high temperature, and less light, the lighter surface receives low temperature and more light.
Learn more about temperature from the given link.
https://brainly.com/question/25677592
#SPJ1
Draw the Lewis structure for the polyatomic nitrate NO−3 anion. Be sure to include all resonance structures that satisfy the octet rule.
It is a monovalent inorganic ion that belongs to the reactive nitrogen species and is called a nitrogen oxoanion.
What is ion ?
An ion with more than one atom is referred to as a polyatomic ion. One such ion is the nitrate ion! It has one nitrogen atom and three oxygen atoms.
As seen in the graphic accompanying this answer, it is an ion in which there is charge separation. The nitrate ion's Lewis structure, which complies with the octet rule, is represented in the diagrams.Nitrates are an ester family of nitric acid (HNO3) and alcohol molecules. By losing a proton from nitric acid, nitrate is a nitrogen oxoanion. main species found at pH 7.3.
To learn more about ion click here:
https://brainly.com/question/13692734
#SPJ4
Write a balanced overall reaction given the unbalanced half‑reactions. Ca ⟶ Ca2+ Na+ ⟶ Na
Answer:
Ca + 2 Na+ + 2 e- ⟶ Ca2+ + 2 Na
Explanation:
The overall reaction is balanced by including the electrons that are transferred in the reaction. The balanced overall reaction is:
Ca + 2 Na+ + 2 e- ⟶ Ca2+ + 2 Na
This reaction shows the transfer of two electrons from calcium to sodium ions, which results in the formation of calcium ions and sodium atoms. This reaction is electrically neutral, with the same number of positive and negative charges on each side of the reaction. Overall, the reaction represents the transfer of electrons from one element to another, resulting in the formation of new chemical species.