At the beginning of the year, a company predicts total overhead costs of $560,000. The company applies overhead using machine hours and estimates it will use 1,400 machine hours during the year. What amount of overhead should be applied to Job 65A if that job uses 13 machine hours during January? Overhead applied to Job 65A _____

Maggie Corp. needs to sell 10,100 units to break even. To break even, Maggie Corp. must sell enough units to cover its fixed costs and variable costs.

The contribution margin per unit is calculated by subtracting variable costs from the selling price, which in this case is $12 ($31 - $19). Dividing the fixed costs by the contribution margin per unit gives the number of units required to break even, which in this case is 10,100 units ($121,200 ÷ $12).

Therefore, Maggie Corp. needs to sell 10,100 units to break even. It is important to note that any units sold beyond this point will generate profit for the company. Additionally, if the selling price or variable costs were to change, the break-even point would also change accordingly.

To know more about break even , refer to the link:

https://brainly.com/question/13770712#

#SPJ11

Based on the provided probabilities for each outcome, the expected value is $880.

The expected value is calculated by multiplying each outcome by its probability and adding up all of the results. It is given that outcome probability of $500 is 0.3, $1,000 is 0.6, and $1,300 is 0.1.

1: Multiply each given outcome by its associated probability.

$500 × 0.3 = $150

$1,000 × 0.6 = $600

$1,300 × 0.1 = $130

2: Add the results obtained from Step 1 together to determine the expected value.

$150 + $600 + $130 = $880

The expected value is $880.

Learn more about Expected value:

https://brainly.com/question/24305645

#SPJ11

For Flash and Clash, the contribution margin per labour hour is $25 and $30, respectively. In order for the DVD Corporation to make the most money, Clash should be produced because it has a bigger contribution margin per labour hour.

The gross profit margin formula and the net profit margin formula, which are both discussed below the profit margin formula, are further divided into two formulas. The formula for profit margin is as follows:

Formula for Calculating Profit Margin:

((Revenue - Cost of Goods Sold)/Revenue) x 100.

The contribution margin per labour hour for both Flash and Clash is calculated in detail here:

Step 1: Determine each product's contribution margin.

Contribution Margin for Flash is calculated as Sales Price - Variable Costs.

Direct costs plus direct labour and variable production overhead equal variable costs.

Variable Costs = $70 + $100 + $70 = $240

Contribution Margin = $340 - $240 = $100

For Clash:

Variable Costs = Direct materials + Direct labour + Variable factory overhead

Variable Costs = $30 + $50 + $50 = $130

Contribution Margin = $190 - $130 = $60

Step 2: Calculate the contribution margin per labour hour for each product.

Contribution Margin per Labor Hour = Contribution Margin / Direct Labor Hours

For Flash:

Direct Labor Hours = 4

Contribution Margin per Labor Hour = $100 / 4 = $25

For Clash:

Direct Labor Hours = 2

Contribution Margin per Labor Hour = $60 / 2 = $30

Step 3: Choose the product that will yield the highest contribution margin per labour hour.

DVD Production Company should create Clash since it has a greater contribution margin per labour hour ($30) than Flash ($25), which will increase profits.

To sum up:

- Flash: Contribution margin per labour hour is $25

- Clash: Contribution margin per labour hour is $30

- Clash should be produced as it has a higher contribution margin per labour hour.

To learn more about contribution margin, visit:

brainly.com/question/24039258

#SPJ1

(a) The expected time until departure from the system when all three servers are busy and no one is waiting is equal to 1/(3µ).

(b) The expected time until the second departure when all three servers are busy and no one is waiting is equal to 1/(2µ).

(c) The expected time until departure from the system when all three servers are busy and one person is waiting is equal to 1/(2µ).

(a) When all three servers are busy and no one is waiting, the arrival of the next customer will join the queue and wait until one of the servers becomes free. The probability of a server becoming free at any time is 1/3, and the expected time until this happens is 1/µ.

Therefore, the expected time until departure from the system is the sum of the expected waiting time in the queue and the expected service time, which is given by 1/(3µ).

(b) When all three servers are busy and no one is waiting, the arrival of the next customer will join the queue and wait until one of the servers becomes free. The first departure will occur when the customer currently being served by the server with the shortest queue finishes. The probability of this server being chosen is 1/3, and the expected time until the end of the service is 1/µ.

Therefore, the expected time until the first departure is 1/(3µ). Once the first departure occurs, the next departure will occur when the customer currently being served by the server with the shortest queue finishes. Since there are only two servers left, the probability of this server being chosen is 1/2, and the expected time until the end of the service is 1/µ. Therefore, the expected time until the second departure is 1/(2µ).

(c) When all three servers are busy and one person is waiting, the next customer will immediately begin service on the server that becomes free first. The probability of each server becoming free at any time is 1/3, and the expected time until this happens is 1/µ.

Therefore, the expected time until the customer who is currently waiting begins service is 1/(3µ). Once this customer begins service, the expected service time is 1/µ. Therefore, the expected time until departure from the system is the sum of the expected waiting time and the expected service time, which is given by 1/(2µ).

To know more about departure refer here:

https://brainly.com/question/27425966#

#SPJ11

Yes, depending on the maturity date, held-to-maturity investments are categorized as either current assets or long-term assets on the balance sheet.

If the investment matures within the next year, it is considered a current asset and is reported under the current assets section of the balance sheet.

If the investment matures after one year, it is considered a long-term asset and is reported under the non-current assets section of the balance sheet.

It is important for companies to properly categorize their held-to-maturity investments in order to provide accurate financial statements and comply with accounting standards.

Learn more about held to maturity at

https://brainly.com/question/14805952

#SPJ11

To determine if offering a higher cash back will give a 95% confidence for the mean, the bank needs to conduct a hypothesis test.

They would need to gather data on the cashback offered, the number of customers who took advantage of the offer, and the resulting revenue generated. Then, they would use statistical tools to calculate the mean and confidence interval.

If the confidence interval falls within the desired range, the bank can be 95% confident that offering a higher cashback will lead to a positive increase in revenue.

However, if the confidence interval is outside the desired range, the bank cannot be confident that offering a higher cashback will result in a positive impact on revenue.

It's important for the bank to consider other factors, such as the cost of offering higher cashback and the long-term impact on customer loyalty. Overall, conducting a hypothesis test can help the bank make an informed decision on whether to offer a higher cashback.

To know more about hypothesis test refer here:

https://brainly.com/question/31199947#

#SPJ11

Bergman first called Wigand in order to hire him as a consultant for a story he was working on for CBS. Mike Wallace wanted to speak with Wigand, who had previously worked for tobacco giant Brown & Williamson, in order to try and get him to blow the whistle on the company and their practices.

However, Wigand was hesitant to do so and was not returning Bergman's calls. In order to get in contact with Wigand, Bergman then sent him a fax with the details of the report he wanted to do and asked Wigand to call him. This was the second means of contact Bergman used in order to speak with Wigand, as he had previously tried calling Wigand directly with no success.

Bergman's persistence in trying to get in contact with Wigand eventually paid off, as Wigand agreed to speak with Mike Wallace and tell his story. This eventually paved the way for the tobacco industry to be exposed and for the world to learn about the potentially dangerous effects of smoking.

know more about company here

https://brainly.com/question/30532251#

#SPJ11

The journal entry to record the transaction for Tyler, would include debit cash and credit Preferred Stock

Total number of shares = 100

The par value of the shares = $10

Amount of preferred stock = $5,000

According to generally accepted accounting principles (GAAP) and the pertinent accounting rules applicable in the jurisdiction where Tyler, Inc. operates, the entry would be made in the business' general ledger and financial records.

The journal entry to record the transaction of Tyler, Inc. issuing 100 shares of $10 par value preferred stock for $5,000 cash would be -

Cash A/c   Dr                                               $5,000

To Preferred Stock A/c                               $1,000

To Paid-in Capital in Excess of Par Value $4,000

( Being preferred stocks issued in cash)

Read more about the journal on:

https://brainly.com/question/14279491

#SPJ4

Macroeconomic factors can have a significant impact on interest rates at different levels of economy.

These factors include inflation, economic growth, and government monetary policies. When inflation is high, interest rates tend to increase in order to combat the rising cost of goods and services. Similarly, when economic growth is strong, interest rates may increase to prevent the economy from overheating. On the other hand, when economic growth is sluggish or there is a recession, interest rates may be lowered to encourage borrowing and stimulate the economy. Finally, government monetary policies, such as quantitative easing or raising reserve requirements for banks, can also impact interest rates. Overall, macroeconomic factors play a crucial role in determining the level of interest rates.

Learn more about interest rates here:

https://brainly.com/question/13324776

#SPJ11

Macroeconomic factors play a crucial role in determining the level of interest rates in an economy. Some of the major macroeconomic factors that affect interest rates include inflation, economic growth, government policies, and international trade.

Inflation is one of the most important macroeconomic factors that impact interest rates. When inflation rises, the central bank may increase interest rates to control the rising prices. Higher interest rates make borrowing more expensive, which can lead to a decrease in demand for credit and ultimately lower inflation.

Economic growth is another important factor that affects interest rates. When the economy is growing, businesses need to borrow more to finance their expansion plans, which increases the demand for credit. This can lead to an increase in interest rates as lenders seek to make higher profits.

Government policies can also influence interest rates. For instance, if the government increases spending, it may borrow more, which increases the demand for credit and drives up interest rates. Similarly, if the government decreases taxes, it may reduce the amount of money available to lend, which can also push up interest rates.

Finally, international trade can impact interest rates. When a country's economy is heavily dependent on exports, fluctuations in international trade can impact the economy's growth. This can then affect interest rates, as lenders adjust rates to reflect the economic conditions.

In conclusion, macroeconomic factors have a significant impact on the level of interest rates in an economy. As such, policymakers and investors closely monitor these factors to predict changes in interest rates and adjust their strategies accordingly.

LEARN MORE ABOUT Macroeconomic HERE:

https://brainly.com/question/30044582

#SPJ11

The formal assessment and presentation of the economic expenditures needed for a particular security control, contrasted with its projected value to the organization, is known as a cost-benefit analysis.

A cost-benefit analysis is a useful tool for decision-making in security management. It helps organizations to evaluate the economic feasibility of security controls and determine the potential return on investment.

The analysis involves identifying the costs of implementing a security control, such as the cost of purchasing hardware and software, hiring staff, and training employees. It also involves estimating the potential benefits of the security control,

such as reducing the risk of a security breach, minimizing financial losses, and protecting the reputation of the organization.

By comparing the costs and benefits of the security control, the analysis provides insights into the economic viability of the security control and helps organizations to make informed decisions about its implementation.

A cost-benefit analysis is an important part of the overall risk management process and can assist organizations in maximizing their security investments while minimizing their costs.

To know more about investments click here

brainly.com/question/15353704

#SPJ11

what is also known as an economic feasibility study, the formal assessment and presentation of the economic expenditures needed for a particular security control, contrasted with its projected value to the organization, is known as _____.

According to the question, the marginal cost of the third unit of output is $20/1 = $20.

Marginal cost is the cost to produce one additional unit of a product or service. It is calculated by calculating the total cost of production and then subtracting the total cost of all units produced minus one. It includes both fixed and variable costs. For example, the marginal cost of producing an additional unit of a product may include the cost of raw materials and labor needed to produce that unit, as well as the depreciation costs associated with any new machinery and equipment used to produce it.

In this case, the total cost of the third unit of output is $65 and the total cost of the second unit of output is $45, so the difference is $20. The third unit of output is one more than the second unit of output, so the difference is 1.

Therefore, the marginal cost of the third unit of output is $20/1 = $20.

To learn more about marginal cost

https://brainly.com/question/30165613

#SPJ1

Adding these interviews would change the total cost, but we would need more information or a new sensitivity report to determine the exact amount.

a. Using Solver in Excel, the interview plan that satisfies the research requirements at the minimum cost is:

- 400 interviews with households with children in the evening
- 200 interviews with households with children during the day
- 400 interviews with households without children in the evening
- 100 interviews with households without children during the day

The total number of interviews conducted is 1000, with at least 400 for both types of households, and evening interviews being at least as many as day interviews. The check value for the total cost is $20320.

b. If the price for daytime interviews with households with children is increased to $25, Solver will still produce the same solution. This is because the evening interviews with households with children are more expensive than the daytime interviews, so it is still more cost-effective to conduct more evening interviews with households with children.

c. If the company requires 200 more interviews, Solver will produce a new solution that conducts 1200 interviews in total. The new interview plan that satisfies the research requirements at the minimum cost is:

- 480 interviews with households with children in the evening
- 240 interviews with households with children during the day
- 480 interviews with households without children in the evening
- 120 interviews with households without children during the day

The check value for the total cost is $30480, which is higher than the original cost due to the additional interviews.

Learn more about total cost here:

https://brainly.com/question/30355738

#SPJ11

The correct sequence of events that follows an increase in demand in a constant cost industry where P = AC = $20 is:

P > AC, firms make an economic profit, existing firms expand output, new firms enter the industry, the short-run supply curve shifts right, price falls until profits return to $0.

As demand increases, the price will also increase above the average cost, leading to economic profits for firms in the industry. Existing firms will expand their output to meet the higher demand, and new firms will enter the industry to also benefit from the economic profits.

This will result in an increase in the short-run supply curve and a decrease in price until profits return to normal. Since the industry is in a constant cost environment, there will be no change in the average cost of production, and the final price will be equal to the average cost of production, which is $20.

to know more about increase in demand  refer here

https://brainly.com/question/13213873#

#SPJ11

The work-up procedure used for removing unchanged aldehyde from the desired product involves the addition of a reducing agent and an acid.

The reducing agent, typically sodium borohydride or lithium aluminum hydride, reduces any remaining aldehyde to an alcohol, which is then protonated by the acid.

The resulting mixture is then extracted with a polar solvent, such as diethyl ether or ethyl acetate, to remove the desired product from the aqueous layer containing the by-products and excess reagents. The solvent is then evaporated and the product is isolated.

This work-up procedure ensures that the desired product is free of any residual aldehyde, which can lead to unwanted side reactions or impurities. Overall, this method is a reliable way to obtain pure and high-quality products from aldehyde reactions.

To know more about aldehyde refer here:

https://brainly.com/question/30902678#

#SPJ11

Confirmation Bias - Alana is only seeking evidence that confirms her existing opinion that hiring from UNLV will produce successful employees, rather than considering all available evidence in an unbiased manner.

Employees are individuals who work in an organization, typically in exchange for financial compensation. They can be full-time, part-time, or on contract. Employees are responsible for performing duties and tasks assigned to them by their employer and following the instructions of their supervisors. They are expected to contribute to the success of the company and adhere to company policies. Employees also have certain rights and responsibilities, such as the right to a safe and healthy work environment, the responsibility to act in a professional and ethical manner, and the right to receive payment for work performed.

To learn more about employees
https://brainly.com/question/27404382
#SPJ1

The document that acts as a receipt, a contract, and a document of title for Maine Coast Company's lobster exports to foreign markets is the bill of lading. The correct option is bill to landing.

A bill of lading is a legal document issued by the carrier or their agent, acknowledging receipt of goods, and specifying the terms of shipment. It serves as evidence of the contract of carriage, confirming that the goods have been loaded onto the shipping vessel and are being transported to their destination. In addition, it acts as a receipt by providing proof of delivery, allowing the buyer to claim the goods upon arrival.

Furthermore, the bill of lading serves as a document of title, allowing the buyer to transfer ownership of the goods by endorsing and surrendering the original bill of lading to the carrier or their agent. This allows for smooth and secure transactions between buyers and sellers, ensuring the safe and timely delivery of goods. The correct option is bill to landing.

For more about foreign markets:

https://brainly.com/question/13211872

#SPJ11

The explicit requirement in the Circular No. 230 rule on conflict of interest is that the practitioner may not represent an attest client if the practitioner is personally conflicted under any circumstances.

The explicit requirement in the Circular No. 230 rule on conflict of interest. The explicit requirement in Circular No. 230 is: 2) The practitioner may not represent a client if such representation adversely affects another of the practitioner's client. This rule ensures that a tax professional maintains a high level of professional conduct and avoids any conflicts that could compromise their  to represent their clients effectively and fairly.

To know more about Tax professional

https://brainly.com/question/30138537

#SPJ11

The company must pay for exactly two claims is approximately 0.293, or 29.3%. We can use the binomial probability formula. In this case, an insurance company insures 10 projects, each independently having a 5% chance of requiring a claim to be paid.

To find the chance that the insurance company must pay for exactly two claims, we need to use the binomial probability formula. Let's denote the probability of a claim being made for each project as "p" (which is given as 0.5 since each project has a 50/50 chance of requiring a claim to be paid), and the total number of projects as "n" (which is given as 10). The formula is:

[tex]P(X = k) = (n choose k) * p^k * (1 - p)^(n - k)[/tex]

where X is the random variable representing the number of claims that need to be paid, k is the specific number of claims we're interested in (in this case, k = 2).

Plugging in the values, we get:

P(X = 2) = (10 choose 2) * (0.5)^2 * (1 - 0.5)^(10 - 2)
= (45) * (0.25) * (0.5)^8
= 0.293

Therefore, the chance that the insurance company must pay for exactly two claims is approximately 0.293, or 29.3%.

Learn more about company here:

https://brainly.com/question/30532251

#SPJ11

A narrow deep product mix characterizes a specialty store. Therefore, the correct option is option 1.

Specialty stores typically focus on a specific product category, such as shoes or electronics, and offer a deep assortment of products within that category. Hence, specialty stores are characterized by a narrow deep product mix. The reason for this is that specialty stores focus on a specific product category or target market, offering a limited range of products (narrow product mix) but with a wide variety of options within that category (deep product mix).

This allows them to cater to the needs of a specific group of customers, providing them with expert knowledge and a comprehensive selection within their chosen niche. In contrast, department stores and variety stores offer a broader range of products across multiple categories, while off-price chains offer discounted merchandise from a variety of brands. Hence, the correct answer is option 1: specialty stores.

Learn more about Product mix:

https://brainly.com/question/15229182

#SPJ11

The probability that õ is within $600 of the population mean if a sample of size 80 is used is 0.2855 (to 4 decimals).

SE = σ/√n = 5000/√40 = 790.56

The margin of error for a 95% confidence level is:

ME = z* SE = 1.96 * 790.56 = 1547.68

The range for the sample mean to be within $600 of the population mean is:

$71,300 ± $600 = [$70,700, $71,900]

To calculate the z-scores for these values:

z1 = ($70,700 - $71,300) / 790.56 = -0.758

z2 = ($71,900 - $71,300) / 790.56 = 0.758

Using the z-table, the probability of obtaining a z-score between -0.758 and 0.758 is 0.2824.

Therefore, the probability that õ is within $600 of the population mean if a sample of size 40 is used is 0.2824 (to 4 decimals).

b. For a sample of size n = 80, the standard error of the mean is:

SE = σ/√n = 5000/√80 = 558.43

The margin of error for a 95% confidence level is:

ME = z* SE = 1.96 * 558.43 = 1095.03

The range for the sample mean to be within $600 of the population mean is:

$71,300 ± $600 = [$70,700, $71,900]

To calculate the z-scores for these values:

z1 = ($70,700 - $71,300) / 558.43 = -1.074

z2 = ($71,900 - $71,300) / 558.43 = 1.074

Using the z-table, the probability of obtaining a z-score between -1.074 and 1.074 is 0.2855.

To know more about probability -

https://brainly.com/question/11034287

#SPJ1

The weight on Taggart Transcontinental stock in the market portfolio is closest to 20%.

Based on the table provided, the market consists of only these four stocks as investment opportunities. To calculate the weight of Taggart Transcontinental (TT) stock in the market portfolio, we need to first calculate the market capitalization of each stock by multiplying the price per share by the number of shares outstanding.

For TT, market capitalization = $15.60 x 25 million = $390 million.

For Rearden Metal, market capitalization = $13.00 x 45 million = $585 million.

For Wyatt Oil, market capitalization = $29.25 x 10 million = $292.5 million.

For Nielson Motors, market capitalization = $26.25 x 26 million = $682.5 million.

To find the total market capitalization, we add up the market capitalizations of all four stocks:

$390 million + $585 million + $292.5 million + $682.5 million = $1950 million.

Finally, to find the weight of TT stock in the market portfolio, we divide its market capitalization by the total market capitalization:

Weight of TT stock = ($390 million / $1950 million) x 100% = 20%.

Therefore, the weight on Taggart Transcontinental stock in the market portfolio is closest to 20%.

Learn more about market portfolio here

https://brainly.com/question/15683560

#SPJ11

b) False Using payback to evaluate an investment in a biotech, video games, or movies is not an excellent way to determine whether one should make the investment.

Payback is the time it takes for an investment to generate an amount equal to the initial investment cost. While it is a useful tool to assess the time it takes to recover the initial investment, it does not account for the time value of money, risk, or the investment's potential future returns.

Instead, it's recommended to use other investment evaluation methods such as net present value (NPV) or internal rate of return (IRR) which better consider these factors.

To know more about payback  click on below link :

https://brainly.com/question/28196122#

#SPJ11

The sentence "There is a new software company that will be hiring employees" is an example of concise wording. Thus, option 2 is correct.

The given sentence "There is a new software company that will be hiring employees" is direct, clear, and does not include any unnecessary words or phrases. It conveys the necessary information about the software company and its plan to hire employees in a simple and efficient manner.

Concise wording is often recommended so that the message is conveyed clearly through a few words without the reader losing interest in the topic. Concise writing helps grab the readers' attention and also leaves behind a lasting impact on them. Thus, the given statement is an example of concise wording. Option 2 is correct.

To learn more about concise wording, visit: https://brainly.com/question/16967638

#SPJ11

The internal rate of return (IRR) is a statistic used in capital budgeting to estimate the return of possible investments.

The IRR technique assumes that the company can reinvest cash flows at the project's IRR, whereas the NPV method assumes that cash flows will be reinvested close to or at the project's current cost of capital.

According to the IRR technique, cash flows are assumed to be reinvested at a rate of return equal to the IRR. The MIRR approach counts on cash flows.

To know more about NCFs visit:-

https://brainly.com/question/31319817

#SPJ1

The only policy lever that is effective against unemployment when the AS (Aggregate Supply) curve is vertical is fiscal policy, specifically expansionary fiscal policy.

1. When the AS curve is vertical, the economy is at its potential output, meaning it is at full employment.
2. In such a situation, monetary policy would be ineffective in reducing unemployment because it primarily affects aggregate demand, which does not have an impact on output or employment when the AS curve is vertical.
3. Expansionary fiscal policy, on the other hand, can directly create jobs and reduce unemployment through increased government spending or tax cuts, which would stimulate business investment and consumer spending.
4. This policy lever would effectively target unemployment even when the AS curve is vertical.

To know more about fiscal policy

https://brainly.com/question/27250647

#SPJ11

When a country falls into a recession, the following variables are affected: Output: Output decreases as businesses produce less due to decreased demand. Income: Income also decreases as businesses and individuals earn less money. Unemployment: Unemployment increases as businesses lay off workers due to decreased demand and production.

Consumption spending: Consumption spending decreases as individuals have less money to spend. Spending on imports: Spending on imports also decreases as individuals and businesses have less money to spend. Net exports: Net exports decrease as exports decrease due to decreased demand from other countries. As for the trade partners of the country in recession: Their exports to the country in recession: Their exports to the country in recession decrease as demand for their products decreases. Their level of production and income: Their level of production and income also decreases as they have less demand for their products and services. When one country falls into a recession, it can have a ripple effect and cause other countries to also fall into a recession. Therefore, the statement "True" is selected.

Learn more about country more;

https://brainly.com/question/2945219

#SPJ11

The likelihood that a sample of 694 pet dogs' proportion of Labradors would deviate from the p-value population proportion by less than 3% is 0.9964.The likelihood is computed using the z score.

which is used to calculate how many standard deviations there are in a sample.

The z score is calculated using the formula

Z=(X-u)/o.

Definition of the variables mean,

u =p=8%

= 0.08 sample size,

n = 694 standard deviation,

o = V(p(1-p))/n)

= V[(0.08 * 0.98)/694 = 0.0103

Standard deviation, o = V((p(1-p)/n)

= V[(0.08 * 0.98) / 694) = 0.0103

Less than 3% of the probability deviates from the population percentage.

IX - 0.08| < 0.03 X<0.11

ORX>0.05 0.05 < X<0.11

P(z < 0.1) - P(z < 0.05)

p value for z > -2.9126

= 0.001792 Z, SCore for z 0.05

Z = (0.05 - 0.08) / 0.0103 Z

= (0.12- 0.09) / 0.0102

= 2.9412 SCore for z 0.12

The probability that the proportion is 2.9412.

To know more about p-value visit:

https://brainly.com/question/29325442

#SPJ4

Cash 5,740

Notes Payable 5,740

Computer 2,870

Cash 2,870

Supplies 517

Accounts Payable 517

The first transaction involves borrowing money from the bank, which results in an increase in cash and a corresponding increase in notes payable. The journal entry records the increase in both accounts, with cash and notes payable being debited and credited, respectively.

The second transaction involves the purchase of a computer for $2,870 in cash. The journal entry records the increase in the computer asset and the corresponding decrease in cash, with the computer account being debited and the cash account being credited.

The third transaction involves the purchase of supplies on account, which results in an increase in supplies and a corresponding increase in accounts payable.

The journal entry records the increase in both accounts, with the supplies account being debited and the accounts payable account being credited.

For more questions like Cash click the link below:

https://brainly.com/question/10714011

#SPJ11

Under the conventional retail method what will happen to the cost-to-retail ratio when net markups are included net markups only. The answer is OPTION C

The cost-to-retail ratio examines what much of the retail price of an item is made up of costs. Cost-to-retail ratio = [cost of products available for sale retail value of items available for sale] x 100 is the formula used to calculate this ratio.

The conventional retail method comes close to a lower-of-cost-or-market valuation when the cost-to-retail ratio accounts for both net markups and net markdowns. A markup on an inventory item's original cost is what is meant by the term "markup" in the retail inventory technique. The answer is OPTION C

To learn more about markdowns, click here.

https://brainly.com/question/18761936

#SPJ4

Cash sale of $5,000: This transaction will decrease the average period since it is a cash sale and has no impact on the current ratio. It will increase the receivable turnover ratio since the cash sale will reduce the amount of outstanding accounts receivable. It has no impact on the bad debt to sales ratio since there is no allowance for doubtful accounts related to cash sales.

Bad debt expense of $500: This transaction will increase the average period since it reduces the accounts receivable. It has no impact on the current ratio. It will decrease the receivable turnover ratio since it reduces the amount of accounts receivable, and thus slows down the collection of receivables. It will increase the bad debt to sales ratio since the bad debt expense is recognized as a percentage of sales.

Write-off of $100 account: This transaction will increase the average period since it reduces the accounts receivable. It has no impact on the current ratio. It will decrease the receivable turnover ratio since it reduces the amount of accounts receivable. It will increase the bad debt to sales ratio since the write-off of the account is recognized as a percentage of sales.

Credit sales of $2,500: This transaction will increase the average period since it increases the accounts receivable. It has no impact on the current ratio. It will increase the receivable turnover ratio since the credit sales will increase the amount of outstanding accounts receivable. It has no impact on the bad debt to sales ratio since the allowance for doubtful accounts has not changed.

Learn more about transaction here:

https://brainly.com/question/24730931

#SPJ11

Cash sale of $5,000: This transaction will decrease the average period since it is a cash sale and has no impact on the current ratio. It will increase the receivable turnover ratio since the cash sale will reduce the amount of outstanding accounts receivable. It has no impact on the bad debt to sales ratio since there is no allowance for doubtful accounts related to cash sales.

Bad debt expense of $500: This transaction will increase the average period since it reduces the accounts receivable. It has no impact on the current ratio. It will decrease the receivable turnover ratio since it reduces the amount of accounts receivable, and thus slows down the collection of receivables. It will increase the bad debt to sales ratio since the bad debt expense is recognized as a percentage of sales.

Write-off of $100 account: This transaction will increase the average period since it reduces the accounts receivable. It has no impact on the current ratio. It will decrease the receivable turnover ratio since it reduces the amount of accounts receivable. It will increase the bad debt to sales ratio since the write-off of the account is recognized as a percentage of sales.

Credit sales of $2,500: This transaction will increase the average period since it increases the accounts receivable. It has no impact on the current ratio. It will increase the receivable turnover ratio since the credit sales will increase the amount of outstanding accounts receivable. It has no impact on the bad debt to sales ratio since the allowance for doubtful accounts has not changed.

Learn more about transaction here:

https://brainly.com/question/24730931

#SPJ11