Of nine executives in a business firm, three are married, four have never married, and two are divorced. Three of the executives are to be selected for promotion. Let Y1 denote the number of married executives and Y2 denote the number of never-married executives among the three selected for promotion. Assuming that the three are randomly selected from the nine available, find the joint probability function of Y1 and Y2.

y1

y2 0 1 2 3

0 __ __ __ __ 1 __ __ __ __ 2 __ __ __ __ 3 __ __ __ __

Answer:

7cm

Step-by-step explanation:

Since 1ml=1cm³ that means 210ml=210cm³

The volume of a cuboid( rectangular prism) is given by L×B×H

The height of the water is just as good as the depth.

L×B×H=volume

6×5×H=210cm³ (divide both sides by 6×5 or 30 to isolate the variable)

[tex] \frac{6 \times 5 \times h}{6 \times 5} = \frac{210}{6 \times 5} [/tex]

H=7cm

: . Depth of water is = 7cm

When all the second order partial derivatives of Z are continuous, (a) Zyx = 5y, (b) Zxyz = 0, (c) Zxyy = 5.

It is given that Zxy = 5y and all second-order partial derivatives of Z are continuous, we can find:

(a) Zyx:
Since all second-order partial derivatives are continuous, we can apply Clairaut's theorem, which states that mixed partial derivatives are equal if they exist and are continuous. Therefore, Zxy = Zyx, so Zyx = 5y.

(b) Zxyz:
To find Zxyz, we need to take the partial derivative of Zyx with respect to z. Since Zyx does not depend on z, its partial derivative with respect to z will be zero. Therefore, Zxyz = 0.

(c) Zxyy:
To find Zxyy, we need to take the second partial derivative of Zxy with respect to y. Given Zxy = 5y, we differentiate with respect to y again: d(5y)/dy = 5. So, Zxyy = 5.

In summary, Zyx = 5y, Zxyz = 0, and Zxyy = 5.

Learn more about "partial derivatives": https://brainly.com/question/28728157

#SPJ11

Answer:

B' (-6, 7)

C' ( -8, 1)

Step-by-step explanation:

The rule is

(x,y) → (x -2, y - 1)

A( -2,4) → A' ( -4,3)

To get from A to A', the x value changed by -2 (-2-2 = -4).  The y changed by -1 ( 3-1 = 3)

Helping in the name of Jesus.

The absolute minimum value of given trigonometric-function is 331.9 and absolute maximum value of the same function is 4403.

What is absolute value?

The non-negative value of x or its distance from zero on the number line, regardless of its sign, is the absolute value, modulus, or magnitude denoted by | x | for any real number x. When a function reaches its absolute minimum value, it has reached its lowest conceivable value, and when it reaches its absolute maximum value, it has reached its highest possible value.

Given that the trigonometric function is f(t) = 7t + [tex]7 cot\frac{t}{2}[/tex]

Also given the point at which the function has critical values= [[tex]\frac{\pi }{4} , \frac{7\pi }{2}[/tex] ]

Value of function at [tex]\frac{\pi }{4}[/tex] :

f( [tex]\frac{\pi }{4}[/tex] ) = 7( [tex]\frac{\pi }{4}[/tex] ) + 7 cot([tex]\frac{\pi }{4}.\frac{1}{2}[/tex])

       =[tex]\frac{7\pi }{4}[/tex]       + 7 cot ([tex]\frac{\pi }{8}[/tex])

       =315 + 7 cot 22.5

       =315  + 7(2.414)

       = 315 + 16.898

       =331.898

f( [tex]\frac{\pi }{4}[/tex] ) ≈ 331.9

Value of function at [tex]\frac{7\pi }{2}[/tex] :

f( [tex]\frac{7\pi }{2}[/tex] ) = 7( [tex]\frac{7\pi }{2}[/tex] ) + 7 cot([tex]\frac{7\pi }{2}.\frac{1}{2}[/tex])

        =[tex]\frac{49\pi }{2}[/tex]      + 7 cot ([tex]\frac{7\pi }{4}[/tex])

        =4410 + 7 cot 315

        =4410 + 7(-1)

        =4410-7

        =4403

f( [tex]\frac{7\pi }{2}[/tex] ) =4403

The minimum value=331.9 & maximum value is 4403

To know more about absolute, visit:

https://brainly.com/question/1301718

#SPJ1

The Laplace transform of a+bt+c is (a/s) + (b/s^2) + (c/s). The Laplace transform of A cos(t+Bsin(t)) is (s/(s^2+B^2)) (A cos(φ) + (B/sin(φ)) A sin(φ)), where φ = arctan(B/s).

For a function f(t), the Laplace transform F(s) is defined as ∫[0, ∞) e^(-st) f(t) dt, where s is a complex number.

To find the Laplace transform of a+bt+c, we use linearity and the Laplace transform of elementary functions:

L{a+bt+c} = L{a} + L{bt} + L{c} = a/s + bL{t} + c/s = a/s + b/s^2 + c/s

Therefore, the Laplace transform of a+bt+c is (a/s) + (b/s^2) + (c/s).

B. To find the Laplace transform of A cos(t+Bsin(t)), we use the following identity:

cos(t + Bsin(t)) = cos(t)cos(Bsin(t)) - sin(t)sin(Bsin(t))

Then, we apply the Laplace transform to both sides and use linearity and the Laplace transform of elementary functions:

L{cos(t + Bsin(t))} = L{cos(t)cos(Bsin(t))} - L{sin(t)sin(Bsin(t))}

Using the formula L{cos(at)} = s/(s^2 + a^2), we get:

L{cos(t + Bsin(t))} = (s/(s^2+B^2)) L{cos(t)} - (s/(s^2+B^2)) L{sin(t)}

Using the formula L{sin(at)} = a/(s^2 + a^2), we get:

L{cos(t + Bsin(t))} = (s/(s^2+B^2)) (1/s) - (B/(s^2+B^2)) (1/s)

Simplifying, we get:

L{cos(t + Bsin(t))} = (s/(s^2+B^2)) (A cos(φ) + (B/sin(φ)) A sin(φ)), where φ = arctan(B/s)

Therefore, the Laplace transform of A cos(t+Bsin(t)) is (s/(s^2+B^2)) (A cos(φ) + (B/sin(φ)) A sin(φ)), where φ = arctan(B/s).

For more questions like Function click the link below:

https://brainly.com/question/16008229

#SPJ11

The statement "For any equation containing the variables x and y, the derivative dy/dx can be found by first using algebra to rewrite the equation in the form y = f(x)." is true

For any equation containing the variables x and y, the derivative dy/dx can be found by first using algebra to rewrite the equation in the form y=f(x).
To find the derivative dy/dx, we need to have the equation in the form y = f(x).

By rewriting the equation in this form using algebra,

we can then differentiate the function f(x) with respect to x to find the derivative dy/dx.

Learn more about dy/dx by implicit differentiation: https://brainly.com/question/31401678

#SPJ11

The cost of the film for the whole area of the figure is $73.6.

Given that,

Chris is covering a window with a decorative adhesive film to filter light.

The figure is a window in the shape of a parallelogram.

We have to find the area of the figure.

Area of parallelogram = Base × Height

Area = 8 × 4 = 32 feet²

Cost for the film per square foot = $2.3

Cost of the film for 32 square foot = 32 × $2.3 = $73.6

Hence the cost of the film is $73.6.

Learn more about Area here :

https://brainly.com/question/11952845

#SPJ1

The function with an amplitude of 3 and a phase shift of π/2 is h(x) = 3 cos (2x - π/2) + 3.

The amplitude of a function is the distance between the maximum and minimum values of the function, divided by 2. The phase shift of a function is the horizontal shift of the function from the standard position,

(y = cos(x) or y = sin(x)).
To find the function with an amplitude of 3 and a phase shift of π/2, we need to look for a function that has a coefficient of 3 on the cosine term and a horizontal shift of π/2.
Looking at the given options, we can eliminate option a) because it has a coefficient of -3 on the cosine term, which means that its amplitude is 3 but it is inverted.

Option b) has a coefficient of 3 on the cosine term but it has a phase shift of -π/2, which means it is shifted to the left instead of to the right. Option d) has a phase shift of π/2, but it has a coefficient of -2 on the cosine term, which means its amplitude is 2 and not 3.
A*cos(B( x - C)) + D

Where A is the amplitude, B affects the period, C is the phase shift, and D is the vertical shift.

f(x) = -3 cos(2x - π) + 4

Amplitude: |-3| = 3

Phase shift: π (not π/2) b) g(x) = 3cos(2x + π) -1

Amplitude: |3| = 3

Phase shift: -π (not π/2) c) h(x) = 3 cos (2x - π/2) + 3

Amplitude: |3| = 3

Phase shift: π/2 d) j(x) = -2cos(2x + π/2) + 3200

Amplitude: |-2| = 2 (not 3)

Phase shift: -π/2
Therefore, the only option left is c) h(x) = 3 cos (2x - π/2) + 3. This function has a coefficient of 3 on the cosine term and a horizontal shift of π/2, which means it has an amplitude of 3 and a phase shift of π/2.
For more questions related to amplitude:

https://brainly.com/question/8662436

#SPJ11

In this sample, 154 college graduates and 132 non-college graduates support drilling for oil and natural gas off the coast of California. Therefore, the percentage of college graduates who support drilling is (154/438) x 100 = 35.16%, while the percentage of non-college graduates who support drilling is (132/389) x 100 = 33.95%.

It is worth noting that college graduates have a larger proportion of support than non-college graduates, although the difference is not statistically significant. The percentages of those who oppose and those who are unsure, on the other hand, differ dramatically between the two categories. In this sample, 41.1% of college graduates were opposed to drilling, compared to 32.4% of non-college graduates, and 23.7% were uncertain, compared to 33.6% of non-college graduates.

Overall, the evidence reveals that, while there is some difference in beliefs between college graduates and non-college graduates, the differences are not statistically significant. In both categories, the percentages of support, opposition, and undecided are quite identical. It is worth noting, however, that a sizable proportion of both groups (about one-third) are undecided, implying that there is still substantial disagreement and confusion around this subject.

To learn more about Statistics, visit:

https://brainly.com/question/27342429

#SPJ11

Check the picture below.

[tex]\textit{area of a trapezoid}\\\\ A=\cfrac{h(a+b)}{2}~~ \begin{cases} h~~=height\\ a,b=\stackrel{parallel~sides}{bases~\hfill }\\[-0.5em] \hrulefill\\ a=8\\ b=10\\ h=30 \end{cases}\implies A=\cfrac{30(8+10)}{2}\implies A=270[/tex]

The x-coordinate of the vertex of the parabola whose equation is given would be -3/2. Option C.

To find the x-coordinate of the vertex of the parabola, we need to use the formula:

In this case, a = 3 and b = 9, so:

x = -9/(2*3) = -3/2

Therefore, the x-coordinate of the vertex of the parabola is -3/2.

More on x-coordinate can be found here: https://brainly.com/question/16634867

#SPJ1

The x-coordinate of the vertex of the parabola whose equation is given would be -3/2. Option C.

To find the x-coordinate of the vertex of the parabola, we need to use the formula:

In this case, a = 3 and b = 9, so:

x = -9/(2*3) = -3/2

Therefore, the x-coordinate of the vertex of the parabola is -3/2.

More on x-coordinate can be found here: https://brainly.com/question/16634867

#SPJ1

The measure of angle A and B is 30° and 60° respectively.

Trigonometric Ratios are defined as the values of all the trigonometric functions based on the value of the ratio of sides in a right-angled triangle.

Sin(tetha) = opp/hyp

cos(tetha) = adj/hyp

tan(tetha) = opp/adj

16 is hypotenuse and 8 is opposite

therefore, sin(tetha) = 8/16

sin(tetha) = 0.5

tetha = sin^-1 ( 0.5)

= 30°

The sum of angle in a triangle is 180°. Therefore ,

angle B = 180-(90+30)

= 180-120 = 60°

therefore the measure of angle A and B is 30° and 60° respectively.

learn more about trigonometric ratio from

https://brainly.com/question/24349828

#SPJ1

Answer:

26.95

Step-by-step explanation:

pass =  656.26 = (36 s + 2t) so 17.27 per person assuming teacher & student same price.

lunch = 348.48/36 =9.68/student

pass and lunch = 9.68 + 17.27 =26.95

The overall reliability of the system through time t is approximately 0.370.

You have a system with four components and their reliabilities through time t are given as follows:

1. Component 1: 0.80
2. Component 2: 0.66
3. Component 3: 0.78
4. Component 4: 0.89

To find the overall reliability of the system, you'll need to multiply the reliabilities of each individual component:

Overall Reliability = Component 1 Reliability × Component 2 Reliability × Component 3 Reliability × Component 4 Reliability

Step-by-step calculation:

Overall Reliability = 0.80 × 0.66 × 0.78 × 0.89

Now, multiply the given reliabilities:

Overall Reliability ≈ 0.370

So, the overall reliability of the system through time t is approximately 0.370.

visit here to learn more about reliability:

brainly.com/question/30154360

#SPJ11

The given series is convergent.

We will use the ratio test to determine the convergence or divergence of the given series:

r = [tex]lim_{n\rightarrow \infty} |(ln[(n+1)^2+1]/(2(n+1)^2+7)) / (ln(n^2+1)/(2n^2+7))|[/tex]

r =[tex]lim_{n\rightarrow \infty} |(ln[(n+1)^2+1]/(2(n+1)^2+7)) * ((2n^2+7)/(ln(n^2+1)))|[/tex]

r = [tex]lim_{n\rightarrow \infty} |(ln[(n+1)^2+1]/ln(n^2+1)) * (2n^2+7)/(2(n+1)^2+7)|[/tex]

We note that the expression [tex](ln[(n+1)^2+1]/ln(n^2+1))[/tex] approaches 1 as n approaches infinity. So we can simplify the above expression as:

r = [tex]lim_{n\rightarrow \infty} |(2n^2+7)/(2(n+1)^2+7)|[/tex]

Now, as n approaches infinity, the terms [tex](2n^2+7)[/tex] and [tex]2(n+1)^2+7[/tex] both approach infinity. So we can apply L'Hopital's rule to the limit:

r =[tex]lim_{n\rightarrow \infty } |(4n)/(4n+4)| = lim_{n\rightarrow \infty} |n/(n+1)| = 1[/tex]

Since the limit r is equal to 1, the ratio test is inconclusive. Therefore, we cannot determine the convergence or divergence of the given series using this test.

However, we can use the comparison test to show that the series is convergent. We note that:

[tex]ln(n^2+1) < n^2+1[/tex] for all n >= 1

So we have:

[tex]ln(n^2+1)/(2n^2+7) < (n^2+1)/(2n^2+7)[/tex]

Since the series ∑ [tex](n^2+1)/(2n^2+7)[/tex] converges by the limit comparison test with the series ∑ [tex]1/n^2[/tex], the series ∑ [tex]ln(n^2+1)/(2n^2+7)[/tex] is also convergent by the comparison test.

Therefore, the given series is convergent.

Learn more about convergent series

brainly.com/question/15415793

#SPJ11

The given series is convergent.

We will use the ratio test to determine the convergence or divergence of the given series:

r = [tex]lim_{n\rightarrow \infty} |(ln[(n+1)^2+1]/(2(n+1)^2+7)) / (ln(n^2+1)/(2n^2+7))|[/tex]

r =[tex]lim_{n\rightarrow \infty} |(ln[(n+1)^2+1]/(2(n+1)^2+7)) * ((2n^2+7)/(ln(n^2+1)))|[/tex]

r = [tex]lim_{n\rightarrow \infty} |(ln[(n+1)^2+1]/ln(n^2+1)) * (2n^2+7)/(2(n+1)^2+7)|[/tex]

We note that the expression [tex](ln[(n+1)^2+1]/ln(n^2+1))[/tex] approaches 1 as n approaches infinity. So we can simplify the above expression as:

r = [tex]lim_{n\rightarrow \infty} |(2n^2+7)/(2(n+1)^2+7)|[/tex]

Now, as n approaches infinity, the terms [tex](2n^2+7)[/tex] and [tex]2(n+1)^2+7[/tex] both approach infinity. So we can apply L'Hopital's rule to the limit:

r =[tex]lim_{n\rightarrow \infty } |(4n)/(4n+4)| = lim_{n\rightarrow \infty} |n/(n+1)| = 1[/tex]

Since the limit r is equal to 1, the ratio test is inconclusive. Therefore, we cannot determine the convergence or divergence of the given series using this test.

However, we can use the comparison test to show that the series is convergent. We note that:

[tex]ln(n^2+1) < n^2+1[/tex] for all n >= 1

So we have:

[tex]ln(n^2+1)/(2n^2+7) < (n^2+1)/(2n^2+7)[/tex]

Since the series ∑ [tex](n^2+1)/(2n^2+7)[/tex] converges by the limit comparison test with the series ∑ [tex]1/n^2[/tex], the series ∑ [tex]ln(n^2+1)/(2n^2+7)[/tex] is also convergent by the comparison test.

Therefore, the given series is convergent.

Learn more about convergent series

brainly.com/question/15415793

#SPJ11

The 100(1-α)% confidence interval for a population mean when n is greater than or equal to 30 and σ is unknown is: X ± t_(α/2, n-1) * s/√n.

If n is greater than or equal to 30 and the population standard deviation is unknown, we can use the t-distribution to construct a confidence interval for the population mean.

The formula for the confidence interval is:

X ± t_(α/2, n-1) * s/√n

where X is the sample mean, s is the sample standard deviation, n is the sample size, t_(α/2, n-1) is the t-score with (n-1) degrees of freedom that corresponds to the desired level of confidence (1-α), and α is the significance level.

The degrees of freedom for the t-distribution is (n-1) because we use the sample standard deviation to estimate the population standard deviation.

Therefore, the 100(1-α)% confidence interval for a population mean when n is greater than or equal to 30 and σ is unknown is:

X ± t_(α/2, n-1) * s/√n

where t_(α/2, n-1) is the t-score with (n-1) degrees of freedom that corresponds to the desired level of confidence (1-α).

To learn more about population mean visit: https://brainly.com/question/30727743

#SPJ11

The minimum pumping length of {} is any positive integer, of {a} is 1, {a, aaaa, aa}: 1, σ∗: 1 and of {ϵ} is not regular

To find the minimum pumping length for a given language, we need to consider the smallest possible strings in the language and find the smallest length at which we can apply the pumping lemma.

{} (the empty language): There are no strings in the language, so the pumping lemma vacuously holds for any pumping length. The minimum pumping length is any positive integer.

{a}: The smallest string in the language is "a". We can choose the pumping length to be 1, since any substring of "a" of length 1 is still "a". Thus, the minimum pumping length is 1.

{a, aaaa, aa}: The smallest string in the language is "a". We can choose the pumping length to be 1, since any substring of "a" of length 1 is still "a". Thus, the minimum pumping length is 1.

σ∗ (the Kleene closure of σ): Any string over {a} is in the language, including the empty string. We can choose the pumping length to be 1, since any substring of any string in the language of length 1 is still in the language. Thus, the minimum pumping length is 1.

{ϵ} (the language containing only the empty string): The smallest string in the language is the empty string, which has length 0. However, the pumping lemma requires that the pumping length be greater than 0. Since there are no other strings in the language, we cannot satisfy the pumping lemma for any pumping length. Thus, the language {ϵ} is not regular.

For more such questions on Pumping length.

https://brainly.com/question/31386297#

#SPJ11

Therefore, the probability of getting a blue face or a red face in one roll is 2/3.

A cube has six faces, and we know that two of these faces are blue and two are red. Therefore, there are a total of 4 faces that are either blue or  red.

To calculate the probability of getting a blue or a red face in one roll, we can use the formula:

P(blue or red) = P(blue) + P(red)

The probability of rolling a blue face is the number of blue faces divided by the total number of faces, which is 2/6, since there are 2 blue faces out of a total of 6 faces. Similarly, the probability of rolling a red face is also 2/6.

So, substituting these values into the formula, we get:

P(blue or red) = 2/6 + 2/6

= 4/6

= 2/3

Therefore, the probability of getting a blue or a red face in one roll of the cube is 2/3.

To know more about probability,

https://brainly.com/question/30034780

#SPJ11

The shortest distance from the point (3, 0, −2) to the plane x + y + z = 2 is √(3) or approximately 1.732 units.

To find the shortest distance, d, from the point (3, 0, −2) to the plane x + y + z = 2, we need to use the formula for the distance between a point and a plane.

First, we need to find the normal vector of the plane. The coefficients of x, y, and z in the plane equation (1, 1, 1) form the normal vector (since the plane is perpendicular to this vector).

Next, we can use the point-to-plane distance formula:

d = |(ax + by + cz - d) / √(a² + b² + c²)|

where (a, b, c) is the normal vector of the plane, (x, y, z) is the coordinates of the point, and d is the constant term in the plane equation.

Plugging in the values, we get:

d = |(1(3) + 1(0) + 1(-2) - 2) / √(1² + 1² + 1²)|

d = |(1 + 0 - 4) / √(3)|

d = |-3 / √(3)|

d = |-√(3)|

Therefore, the shortest distance from the point (3, 0, −2) to the plane x + y + z = 2 is √(3) or approximately 1.732 units.

To learn more about shortest distance here:

brainly.com/question/31136574#

#SPJ11

Answer:

2.5 hours

Step-by-step explanation:

Let's call the time Jim spent on his bike "t", in hours.

We know that the total time of the trip was 4 hours, so the time he spent walking was 4 - t.

We can use the formula:

distance = rate x time

to set up two equations based on the distances traveled while biking and walking:

Distance biked = rate biking x time biking = 41t

Distance walked = rate walking x time walking = 5(4 - t) = 20 - 5t

The total distance of the trip is 110 miles, so:

Distance biked + distance walked = 110

Substituting the equations for distance biked and walked:

41t + 20 - 5t = 110

36t = 90

t = 2.5

So Jim spent 2.5 hours on his bike.

Hope this helps!

The tangential component of the acceleration vector is (4t / (1 + 4t² + 9)[tex]^{1/2}[/tex])i + (8t²/ (1 + 4t² + 9)[tex]^{1/2}[/tex])j + (12t / (1 + 4t² + 9)[tex]^{1/2}[/tex])k, and the normal component of the acceleration vector is -4t / (1 + 4t² + 9)[tex]^{1/2}[/tex] * i + (2 - 8t² / (1 + 4t² + 9)[tex]^{1/2}[/tex])j - 12t / (1 + 4t² + 9)[tex]^{1/2}[/tex] * k.

To find the tangential and normal components of the acceleration vector, we first need to find the acceleration vector itself by taking the second derivative of the position vector r(t):

r(t) = ti + [tex]t^{2j}[/tex] + 3tk

v(t) = dr/dt = i + 2tj + 3k

a(t) = dv/dt = 2j

The acceleration vector is a(t) = 2j. This means that the acceleration is entirely in the y-direction, and there is no acceleration in the x- or z-directions.

The tangential component of the acceleration vector, a_T, is the component of the acceleration vector that is parallel to the velocity vector v(t). Since the velocity vector is i + 2tj + 3k and the acceleration vector is 2j, the tangential component is:

a_T = (a(t) · v(t) / ||v(t)||[tex]^{2}[/tex]) * v(t) = (0 + 4t + 0) / [tex](1 + 4t^{2} + 9)^{1/2}[/tex] * (i + 2tj + 3k)

Simplifying this expression, we get:

a_T = (4t / [tex](1 + 4t^{2} + 9 ^{1/2} )[/tex]i + (8t^2 / (1 + 4t^2 + 9)^(1/2))j + (12t / (1 + 4t^2 + 9)[tex]^{1/2}[/tex])k

The normal component of the acceleration vector, a_N, is the component of the acceleration vector that is perpendicular to the velocity vector. Since the acceleration vector is entirely in the y-direction, the normal component is:

a_N = a(t) - a_T = -4t / (1 + 4t² + 9)[tex]^{1/2}[/tex]* i + (2 - 8t² / (1 + 4t²+ 9)[tex]^{1/2}[/tex])j - 12t / (1 + 4t² + 9)[tex]^{1/2}[/tex]* k

Therefore, the tangential component of the acceleration vector is (4t / (1 + 4t² + 9)[tex]^{1/2}[/tex])i + (8t²/ (1 + 4t² + 9)[tex]^{1/2}[/tex])j + (12t / (1 + 4t² + 9)[tex]^{1/2}[/tex])k, and the normal component of the acceleration vector is -4t / (1 + 4t² + 9)[tex]^{1/2}[/tex] * i + (2 - 8t² / (1 + 4t² + 9)[tex]^{1/2}[/tex])j - 12t / (1 + 4t² + 9)[tex]^{1/2}[/tex] * k.

Learn more about tangential and normal components

brainly.com/question/30029917

#SPJ11

The problem involves finding the compositions of two functions f and g, their inverse functions, and the composition of the inverse functions. The solution demonstrates how to apply these concepts.

To find the compositions of functions and their inverse functions.

Using the given definitions of f and g.

We find their compositions and their inverse functions. Then we apply these results to find the compositions of inverse functions.

(a) fog: [tex]fog(x) = f(g(x)) = f(5x+7) = 2(5x+7) + 3 = 10x + 17[/tex]

(b) gof: [tex]gof(x) = g(f(x)) = g(2x+3) = 5(2x+3) + 7 = 10x + 22[/tex]

(c) [tex](fog)^-1:[/tex]

We first find fog(x) and then solve for x: [tex]fog(x) = 10x + 17[/tex]

[tex]x = (fog(x) - 17)/10[/tex]

[tex](fog)^-1(x) = (x - 17)/10[/tex]

[tex](d) f^-1 o g^-1:[/tex]

[tex]f^-1(x) = (x - 3)/2[/tex]

[tex]g^-1(x) = (x - 7)/5[/tex]

[tex](f^-1 o g^-1)(x) = f^-1(g^-1(x)) = f^-1((x-7)/5)[/tex] = [tex][(x-7)/5 - 3]/2 = (x-23)/10[/tex]

(e)[tex]g^1 o f^-1:[/tex] [tex]g^1(x) = (x-7)/5[/tex]

[tex](g^1 o f^-1)(x) = g^1(f^-1(x))[/tex]

=[tex]g^1((x-3)/2) = 5((x-3)/2) + 7[/tex]

=[tex](5x+2)/2[/tex]

Overall, the problem requires a solid understanding of function composition, inverse functions, and basic algebraic manipulation.

To learn more about inverse functions, visit here

https://brainly.com/question/2541698

#SPJ4

Answer:

c. 50(i-0.1)² + 210(i - 0.1) + 320.5.

Step-by-step explanation:

To find the equivalent expression that contains the future value for a monthly interest rate of i = 0.1, we simply substitute i = 0.1 into the equation V = 50(1 + i)² + 100(1 + i) + 150 and simplify.

V = 50(1 + 0.1)² + 100(1 + 0.1) + 150

V = 50(1.1)² + 100(1.1) + 150

V = 50(1.21) + 110 + 150

V = 60.5 + 110 + 150

V = 320.5

Therefore, the expression that contains the future value for a monthly interest rate of i = 0.1 is c. 50(i-0.1)² + 210(i - 0.1) + 320.5.

Note that this is a vector calculus problem and the tabularized answers are attached accordingly. See the explanation below.

This is a vector calculus problem, which is a branch of mathematics that deals with vectors and functions of vectors. It involves the study of vector fields, which are functions that assign a vector to each point in a given region of space, and the operations that can be performed on them, such as gradient, divergence, and curl. It is often studied in the context of calculus, physics, and engineering.

To fill in the table, we need to calculate the curl and divergence of the given vector fields and determine if they are conservative. Here are the calculations:

F1 = (x - 2z)i + (x + 7y + z)j + (z - 2y)k

Curl F1 = (∂Q/∂y - ∂P/∂z)i + (∂R/∂z - ∂P/∂x)j + (∂P/∂y - ∂Q/∂x)k

= (1 - 0)i + (-2 - 0)j + (7 - 1)k

= i - 2j + 6k

Div F1 = ∂P/∂x + ∂Q/∂y + ∂R/∂z

= 1 + 7 - 2

= 6

Since the curl of F1 is not equal to zero, F1 is not a conservative vector field.

Therefore, the table for F1 would be:

F1 Curl F1 DivF1 is conservative (Y/N)?

(x-2z)i + (x+7y + z)j + (z-2y)k <i - 2j + 6k> 6 N

F2 = yzi + xzj + zyk

Curl F2 = (∂Q/∂y - ∂P/∂z)i + (∂R/∂z - ∂P/∂x)j + (∂P/∂y - ∂Q/∂x)k

= z i + 0j + x k

Div F2 = ∂P/∂x + ∂Q/∂y + ∂R/∂z

= z + z + 1

= 2z + 1

Since the curl of F2 is not equal to zero, F2 is not a conservative vector field.

Therefore, the table for F2 would be:

F2 Curl F2 DivF2 is conservative (Y/N)?

yzi + xzj + zyk <zi + 0k> 2z + 1 N

Learn more about vectors at:

https://brainly.com/question/10164701

#SPJ1

Note that this is a vector calculus problem and the tabularized answers are attached accordingly. See the explanation below.

This is a vector calculus problem, which is a branch of mathematics that deals with vectors and functions of vectors. It involves the study of vector fields, which are functions that assign a vector to each point in a given region of space, and the operations that can be performed on them, such as gradient, divergence, and curl. It is often studied in the context of calculus, physics, and engineering.

To fill in the table, we need to calculate the curl and divergence of the given vector fields and determine if they are conservative. Here are the calculations:

F1 = (x - 2z)i + (x + 7y + z)j + (z - 2y)k

Curl F1 = (∂Q/∂y - ∂P/∂z)i + (∂R/∂z - ∂P/∂x)j + (∂P/∂y - ∂Q/∂x)k

= (1 - 0)i + (-2 - 0)j + (7 - 1)k

= i - 2j + 6k

Div F1 = ∂P/∂x + ∂Q/∂y + ∂R/∂z

= 1 + 7 - 2

= 6

Since the curl of F1 is not equal to zero, F1 is not a conservative vector field.

Therefore, the table for F1 would be:

F1 Curl F1 DivF1 is conservative (Y/N)?

(x-2z)i + (x+7y + z)j + (z-2y)k <i - 2j + 6k> 6 N

F2 = yzi + xzj + zyk

Curl F2 = (∂Q/∂y - ∂P/∂z)i + (∂R/∂z - ∂P/∂x)j + (∂P/∂y - ∂Q/∂x)k

= z i + 0j + x k

Div F2 = ∂P/∂x + ∂Q/∂y + ∂R/∂z

= z + z + 1

= 2z + 1

Since the curl of F2 is not equal to zero, F2 is not a conservative vector field.

Therefore, the table for F2 would be:

F2 Curl F2 DivF2 is conservative (Y/N)?

yzi + xzj + zyk <zi + 0k> 2z + 1 N

Learn more about vectors at:

https://brainly.com/question/10164701

#SPJ1

From the Venn diagram, the values of a, b, c and d are11,19,35,35 respectively

A Venn diagram is an illustration that uses circles to show the relationships among things or finite groups of things. Circles that overlap have a commonality while Circles that do not overlap do not share those traits.

The universal set is ∈ = 100

The languages are

Spanish = 30

Russian = 54

(S∪ R)¹ = 35 = d

a = Spanish only = a-b

30-b = a

Russia only = c-b

54 - b

Therefore, The universal set ∈ is

100 = (a-b) + (b)+ (c-b) +(d)

100 =  30-b + b + 54 - b + 35

100 = 119 - b = 119-100

b= 19

Therefore,

a = 30 -19 =11

b = 19

c = 59 - 19 35

d = 35

Learn more about the Venn diagram on https://brainly.com/question/29301560

#SPJ1

There are 1716 different flags that can be made with 7 stripes, consisting of 2 white, 2 red, and 3 green stripes using the formula for combinations with repetition.

We can use the formula for combinations with repetition to solve this problem

n = total number of items (stripes)

r₁ = number of items of type 1 (white stripes)

r₂ = number of items of type 2 (red stripes)

r₃ = number of items of type 3 (green stripes)

The formula is

C(n+r₁+r₂+r₃-1, r₁+r₂+r₃-1) = C(7+2+2+3-1, 2+2+3-1) = C(13, 6) = 1716

Therefore, we can make 1716 different flags with 7 stripes if we have 2 white, 2 red, and 3 green stripes.

Learn more about combinations here

brainly.com/question/28720645

#SPJ4

Answer:

5/5 es una fracción adecuada ya que el numerador es igual al denominador.