[OH⁻]= 1 x 10⁻¹⁴ : 4.8 x 10⁻⁴ = 2.083 x 10⁻¹¹
Archimedes principle states that the buoyant force on an object is equal to the blank of the fluid displaced by the object
False. The principle states that the buoyant force on an object is equal to the weight of the fluid displaced by the object.
What is Archimedes' principle?It is a theory propounded by Archimedes. It opines that a floating body is acted upon by a buoyant force.
The buoyant force is the same as the weight of the fluid displaced by the floating body.
Thus, instead of saying 'the buoyant force is equal to the blank of the fluid displaced', it is actually 'the buoyant force is equal to the weight of the fluid displaced'.
More on Archimedes' principle can be found here: https://brainly.com/question/13106989
#SPJ1
A thin sample of X is put between metal plates. A radio-frequency electric current is applied to the plates and passes through the sample. From the measured voltage across the plates the value of E may be calculated.
Is this a physical or chemical property ?
The value of E determined as shown in the question is a chemical property.
What are chemical property?A chemical property has to do with the chemical changes that occur in a substance. Now we know that The value E refers to how easily a substance could accept or loose electrons.
Thus, the value of E determined as shown in the question is a chemical property.
Learn more about chemical property:https://brainly.com/question/1935242
#SPJ1
A 2.65 g sample of a salmon colored powder contains 0.70 g of chromium, 0.65 g of sulfur, and 1.30 g of oxygen. The molar mass is 392.2. What is the formula of the compound
The molecular formula of the compound is [tex]Cr_{2}S_{3}O_{12}[/tex].
Given:Mass of Cr = 0.70 g
Mass of S = 0.65 g
Mass of O = 1.30 g
Molecular mass = 392.2 g
Moles of Cr = [tex]\frac{0.70}{52.0}[/tex]
= 0.01346 mol
Moles of S = [tex]\frac{0.65}{32.06}[/tex]
= 0.02025 mol
Moles of O = [tex]\frac{1.30}{16.0}[/tex]
= 0.08125 mol
Dividing both sides with lower quantity ;
[tex]Cr_{\frac{0.01346}{0.01346} } S_{\frac{0.2025}{0.01346} } O _{\frac{0.08125}{0.01346} }[/tex]≅ [tex]CS_{1.5} O_{6}[/tex]
And [tex](empirical formula )_{n} = molecular formula[/tex]
392.2 = n (52.0 + 6 × 16.0)
n = 2
Therefore, the molecular formula of the compound is [tex]Cr_{2}S_{3}O_{12}[/tex].
Learn more about molecular formula here:
https://brainly.com/question/13058832
#SPJ4
For the reaction, Cl2(g)+3F2(g)→2ClF3(g) , determine the rate of change of ClF3 if the concentration of F2 decreases from 0.950 M to 0.865 M over 15 seconds.
3.73 x[tex]10^{-3}[/tex] the rate of change of [tex]ClF_3[/tex] if the concentration of [tex]F_2[/tex]decreases from 0.950 M to 0.865 M over 15 seconds.
What is the rate of change?The rate of change is used to mathematically describe the percentage change in value over a defined period of time, and it represents the momentum of a variable.
[tex]Cl_2(g)+3F_2(g)[/tex]→[tex]2ClF_3(g)[/tex]
Rate of change of [tex]F_2[/tex] = [tex]\frac{Change \;in \;concemtration}{Time}[/tex]
Rate of change of[tex]F_2[/tex] = [tex]\frac{0.950 M-0.865 M}{15 seconds}[/tex]
Rate of change of [tex]F_2[/tex] = 5.6 x [tex]10^{-3}[/tex]
[tex]\frac{Rate of change of F_2}{3}[/tex] =[tex]\frac{Rate \;of c\;hange \;of\;ClF_3}{2}[/tex]
[tex]\frac{5.6 X 10^{-3}}{3}[/tex]=[tex]\frac{Rate \;of \;change \;of \;ClF_3}{2}[/tex]
Rate of change of [tex]ClF_3[/tex] =1.866666667 x2 x[tex]10^{-3}[/tex]
Rate of change of [tex]ClF_3[/tex]= 3.73 x [tex]10^{-3}[/tex]
Hence, 3.73 x[tex]10^{-3}[/tex] the rate of change of [tex]ClF_3[/tex] if the concentration of [tex]F_2[/tex]decreases from 0.950 M to 0.865 M over 15 seconds.
Learn more about the rate of change here:
https://brainly.com/question/2734762
#SPJ1
The r value of the yellow dye = 0.60 the distance moved by the yellow dye = 5.7 cm calculate the distance moved by the solvent
The distance moved by the solvent is 9.5 cm.
Calculation:Given,
Rf value of yellow dye = 0.60
Distance moved by yellow distance = 5.7 cm
To calculate,
Distance moved by the solvent =?
We know that the Rf value in chromatography is calculated as:
Rf = distance moved by the solute/ distance moved by the solvent
Putting the given values in the above formula, we get
0.60 = 5.7/ distance moved by solvent
Distance moved by the solvent = 5.7/0.60
Distance moved by solvent = 9.5 cm
What is the Rf value?The ratio of the analyte's (solute) distance traveled to the solvent front on a chromatogram is known as the retention factor (Rf) value.
When using mobile solvents, analytes move differently depending on the type of chromatographic procedure used to transfer them to the stationary phases. The differences between analytes' affinity for stationary and mobile solvents are what cause this difference. The longer an analyte is in place, the lower its Rf value will be, and vice versa, depending on its relative affinity with a stationary phase.
Learn more about the Rf values here:
https://brainly.com/question/14393432
#SPJ4
Help! Help ASAP!
Using bonding principles, describe why AlCl3 forms an ionic bond
Simple
Look at Electronic configuration of Al
[Ne]3s²3p¹It has valency as 3
So it can make 3 bonds
Chlorine has well known valency 1So
Aluminium does bonding with 3 chlorine atoms
There is another reason
That's electronegativity
Chlorine is most electronegative elementAluminium has low electronegativityAs difference in electronegativity is higher they forms ionic bond
The pressure in car tires is often measured in pounds per square inch (lb/in.2), with the recommended pressure being in the range of 25 to 45 lb/in.2. Suppose a tire has a pressure of 38.5lb/in.2 . Convert 38.5lb/in.2 to its equivalent in atmospheres.
Express the pressure numerically in atmospheres.
38.5lb/in.2 = atm
Answer:
2.62 atm
Explanation:
1 atm = 14.6959 psi
38.5 / 14.6959 = 2.62 atm
Hana fills a cup with sandy ocean water. She pours the mixture through a filter. What does she collect that passes through the filter?
a sample of pure water
a solution of salt in water
a suspension of sand in water
a colloid of salt in water
Answer:-
A Solution of salt in Water
Hope It helps!
Answer: B) a solution of salt in water
Explanation:
Have a wonderfullll day :)
why do metals tend to lose electrons to form positive ions?
Answer:
metals tend to lose electrons to form positive ions because they have more protons than electrons.
Molecular and empirical formulas
Answer:
See below
Explanation:
Molecular formula ( just write down all of the elements ) C 4 H4 O4
Empiracle formual CHO
"Molecular formulas tell you how many atoms of each element are in a compound, and empirical formulas tell you the simplest or most reduced ratio of elements in a compound"
What term or terms correctly describes the following pair? Look at the picture pls
Answer:
Different elements
Explanation:
The variable, the bottom number, and the top number all reveal something about each other. The number at the bottom is the element's atomic number, and because both of these pairs have different atomic numbers, they are different elements in general.
A 8.06 g piece of solid CO2 is allowed to sublime in a balloon. The final volume of the balloon is 1.00 L at 300.0 K. What is the pressure of the gas
Answer: The pressure of the gas is 4.4334atm.
Explanation:
The ideal gas law for pressure is shown as: [tex]P=\frac{nRT}{V}[/tex].
~n=number of moles (mol)
~R=ideal gas constant=[tex]0.0821\frac{L*atm}{mol*K}[/tex]
~T=temperature (K)
~V= volume (L)
We are not given the number of moles, but we can find that with the grams of CO₂ that we were given. This is also better because we have the compound as well, making it easier to find its molar mass on the periodic table.
[tex]8.06gCO_{2} *\frac{1molCO_{2} }{44.009gCO_{2} }=0.18molCO_{2}[/tex]
Now we are ready to plug our given information into the formula for the ideal gas law of pressure.
[tex]P=\frac{0.18mol*0.0821\frac{L*atm}{mol*K}*300K }{1.00L}[/tex] [tex]P=4.4334atm[/tex]
Given the work above, the pressure of the gas is 4.4334 atmospheres.
I hope this helps! Pls mark brainliest!! :)
If the number is not a proper coefficient, how would you make it one?
An empty plastic or glass dish being removed from a microwave oven can be cool to the touch, even when food on an adjoining dish is hot. How is this phenom- enon possible?
Answer:
See explanation
Explanation:
Microwaves work by flipping water molecules upside down, then right side up again, and so on at very high speeds, and the friction generates heat. Some glass or plastic isn't affected by the microwaves, so the molecules don't get flipped, and so no friction occurs and no heat is produced, leading to the dish not being heated up.
What is the strongest type of intermolecular force between solute and solvent in each solution? (a) CH3OCH3(g) in H2O(l)
The strongest type of intermolecular force between solute and solvent in CH3OCH3(g) in H2O(l) is H-bond and ion-induced dipole.
What is H-bond?
Hydrogen bonding is a special type of dipole-dipole attraction between molecules, not a covalent bond to a hydrogen atom.
It comes about as a result of the attraction between a hydrogen atom that is covalently attached to a very electronegative atom, like an N, O, or F atom, and another extremely electronegative atom.
Hydrogen is covalently joined to the more electronegative oxygen atom in water molecules (H2O). Therefore, the dipole-dipole interactions between the hydrogen atom of one water molecule and the oxygen atom of another H2O molecule are what cause hydrogen bonding to form in water molecules.
Learn more about hydrogen bonding here:
https://brainly.com/question/14209071
#SPJ4
in diamond carbon atoms are bonded together by extended covalent bonds? what type of solid is diamond?
Diamond is a network solid.
In diamond, carbon atoms are bonded together by extended covalent bonds. Each carbon atom forms four strong covalent bonds with its neighboring carbon atoms, creating a three-dimensional network of carbon-carbon bonds throughout the crystal lattice.
Diamond is a type of solid known as a covalent network solid. In covalent network solids, the atoms are held together by a network of strong covalent bonds, extending throughout the entire crystal structure. This results in a very rigid and hard material with high melting and boiling points.
Other examples of covalent network solids include graphite and quartz. Due to its strong and interconnected carbon-carbon bonds, diamond is renowned for its exceptional hardness and is one of the hardest known naturally occurring materials.
Learn more about Diamond, here:
https://brainly.com/question/34270569
#SPJ3
Calculate the pH of a solution that is 0.175M benzoic acid and 0.190M sodium benzoate, a salt whose anion is the conjugate base of benzoic acid.
4.235 is the pH of a solution that is 0.175M benzoic acid and 0.190M sodium benzoate, a salt whose anion is the conjugate base of benzoic acid.
What is Henderson Hasslbalch Equation ?According to Henderson Hasslbalch Equation to calculate the pH of a solution is expressed as
[tex]pH = pK_{a} + \log \frac{[\text{Congujate base}]}{[\text{Weak acid}]}[/tex]
Benzoic acid (C₆H₅COOH) and its conjugate base is Benzoate (C₆H₅COO⁻) are considered as acidic buffer.
Kₐ for benzoic acid = 6.3 × 10⁻⁵
So, pKₐ = -log Kₐ
= - log [6.3 × 10⁻⁵]
= 4.2
Now put the value in above expression we get
[tex]pH = pK_{a} + \log \frac{[\text{Congujate base}]}{[\text{Weak acid}]}[/tex]
[tex]pH = pK_{a} + \log \frac{C_6H_5COONa}{C_6H_5COOH}[/tex]
[tex]= 4.2 + \log \frac{0.190}{0.175}[/tex]
= 4.2 + 0.035
= 4.235
Thus from the above conclusion we can say that 4.235 is the pH of a solution that is 0.175M benzoic acid and 0.190M sodium benzoate, a salt whose anion is the conjugate base of benzoic acid.
Learn more about the Henderson Hasslbalch Equation here: https://brainly.com/question/9255613
#SPJ4
What is the concentration of ammonia in a solution if 24.4 mL of a 0.117 M solution of HCl are needed to titrate a 100.0 mL sample of the solution
Answer: The concentration of ammonia is 0.0286M.
Explanation:
The diluted equation is presented as: [tex]M_{s} V_{s} =M_{d} V_{d}[/tex].
~M= Molarity (labeled as M)
~V= Volume (labeled in L)
~s= stock solution (what you started with)
~d= diluted solution (what you now have)
Now that we have our definitions, we can knowingly plug the information into the formula shown above.
[tex]0.117M*24.4mL=M_{d} *100mL[/tex]
We have the information plugged in, but the volume must be measured into liters, not milliliters. We can fix that by converting it. To convert milliliters to liters, you divide the milliliters by 1000.
[tex]24.4mL/1000=0.0244L[/tex] [tex]100mL/1000=0.1L[/tex]
Now that the volumes are in liters, let's plug that into the equation.
[tex]0.117M*0.0244L=M_{d} *0.1L[/tex]
We are now ready to solve the concentration with this equation!
[tex]M_{d} =\frac{0.117M*0.0244L}{0.1L}[/tex] [tex]M_{d} =0.0286M[/tex]
With all of the steps shown above, we can conclude that the new concentration of ammonia is 0.0286M.
I hope this helps! Pls mark brainliest!! :)
g at constant temperature, a sample of helium at 2 atm in a closed container was compressed from 5.00 L to 3.00 L. what was the new pressure exerted by the helium on its container
The new pressure exerted by helium on its container is 2533.33 torr.
Boyle's law: For a fixed amount of an ideal gas kept at a fixed temperature, pressure and volume are inversely proportional. so PV= constant.
At constant temperature and moles,
P1V1 = P2V2.
The original sample is at 2atm torr and volume 5.00 L and then helium gas was compressed to 3.00 L
∴ P₁V₁ = P₂V₂
(2× 760 torr)(5.00 L ) = (3.00 L )(x torr),
x = 2533.33 torr.
P₂ = 2533.33 torr.
Therefore, the new pressure exerted by helium on its container is 2533.33 torr.
Learn more about pressure here:
brainly.com/question/15339700
#SPJ4
A solution initially has a [Ca2+] = 0.100 M and [Ba2+] = 0.100 M Sulfate ion (SO42-) is being added to selectively precipitate out the Ba2+ ions and leave behind the Ca2+ ions. (The barium ions will start to precipitate out first because barium sulfate is less soluble than calcium sulfate.) BaSO4 Ksp = 1.07 x 10-10 CaSO4 Ksp = 7.10 x 10-5 Assume that somehow the sulfate ion is being added in a manner that does not change the volume of the solution significantly.
a) At what concentration of sulfate ion would the Ca2+ begin to precipitate out as calcium sulfate?
b) At that concentration of sulfate ion what would be the concentration of Ba2+ ion?
The concentration of sulfate ion would be required for Ca⁺ to begin to precipitate out as calcium sulfate is 7.10 * 10⁻⁴ M.
b) The concentration of the Ba²⁺ ion would be 9.929 * 10⁻² M
What concentration of sulfate ion would be required for Ca⁺ to begin to precipitate out as calcium sulfate?The precipitation of calcium sulfate occurs when the ionic product, Kip is greater than or equal to the solubility product, Ksp of calcium sulfate.
Kip ≥ Kspa) The equation of the dissociation of CaSO₄ is given below:
CaSO₄ ⇄ Ca²⁺ + SO₄²⁻
Ksp = [Ca²⁺] * [SO₄²⁻] = 7.10 * 10⁻⁵
Kip = [Ca²⁺] * [SO₄²⁻]
[SO₄²⁻] = Kip/[Ca²⁺]
[Ca²⁺] = 0.100 M
For precipitation to occur;
Kip = Ksp = 7.10 * 10⁻⁵
[SO₄²⁻] = 7.10 * 10⁻⁵/0.100
[SO₄²⁻] = 7.10 * 10⁻⁴ M
Therefore, the concentration of sulfate ion would be required for Ca⁺ to begin to precipitate out as calcium sulfate is 7.10 * 10⁻⁴ M.
b) The concentration of the Ba²⁺ ion would be;
0.100 M - 7.10 * 10⁻⁴ M = 9.929 * 10⁻² M
Learn more about solubility product at: https://brainly.com/question/20372961
#SPJ1
Processed foods often contain large amounts of salt, but it is actually sodium (Na) that causes health concerns. If 6 g of salt (NaCl) should be an adult's daily maximum, what would the daily maximum of just sodium (Na) be? Give your answer in milligrams. (2 points)
The daily maximum of just sodium (Na) should be = 6000 mg
Calculation of adult daily salt consumptionThe adult's daily maximum intake of salt = 6g
The major element of salt that causes health concerns is sodium (Na).
Therefore the quantity of sodium consumed in milligrammes= 6×1000
= 6000 mg
Learn more about salts here:
https://brainly.com/question/20835655
#SPJ1
Six-membered cyclic hemiacetals and five-membered cyclic hemiacetals are called, respectively, ________.
Answer:
Six-membered cyclic hemiacetals and five-membered cyclic hemiacetals are called, respectively, mannoses and xyloses.
please give me brainliest
The compound iron oxide can exist with either iron(II) ions or iron(III) ions. Conduct Internet research to learn about the differences between iron(II) oxide and iron(III) oxide. Give the chemical formula for each compound. Describe their appearance and uses. Based on your findings, are these two forms of the same compound, or are they two completely different compounds?
answer
Please add answer choice
Explanation:
Answer:
Explanation:
.........................................................
What scientist first developed an equation to calculate the wavelengths of lines in the emission spectrum of hydrogen atoms?.
Answer:
Swedish physicist Johannes Rydberg
Explanation:
Explai how you would find out that carbondioxide and watervapor are formed when acandleburns.
Candle wax is made up of several hydrocarbons with the general formula [tex](CH_2)_n[/tex] , where n is a large number.
Hydrocarbon's on reaction with oxygen forms carbon-dioxide and water vapor. This is called combustion reaction.
[tex](CH_2)_n + O_2 \rightarrow CO_2 + H_2O[/tex]
To find out that carbon-dioxide and water vapor are formed when a candle burns -With duct tape, you can secure the candle to the bowl's base.Water should be added to the bowl until it reaches the candle's top. Don't let the wick become submerged, please!Now you can cover the bowl with transparent lid.After few minutes, you will observe that the transparent lid is now opaque and there are traces of water deposited on the surface of lid.
Conclusion - the lid is opaque due to the carbon-dioxide formed and water vapors are condensed on the surface of lid.
You can learn more about combustion -
https://brainly.in/question/7110987
#SPJ4
A container contains a mixture of neon and argon gases at a uniform temperature. The argon gas has a rms speed of 1.20 km/s. How many Kelvin would the temperature need to change in order for the neon gas to be 39.0% faster than the rms speed of the argon
55.44 K is the temperature that need to change in order for the neon gas to be 39.0% faster than the RMS speed of the argon.
Given
RMS speed of argon = 1.20 km/sec = 1.20 ×[tex]10^{3}[/tex] m/sec
RMS speed of neon = 39% faster than the speed of argon
= RMS speed of argon + [tex]\frac{39}{100}[/tex] RMS speed of argon
= RMS speed of argon ( 1 +0.39)
RMS speed of neon = 1.39 times of RMS speed of argon
Hence [tex]\frac{v_{ne} }{v_{ar} } = \frac{1.39}{1}[/tex] … (1)
The atomic mass of argon is 39.95 g/mol = 39.95×[tex]10^{-3}[/tex] Kg/mol
and the atomic mass of neon is 20.18 g/mol = 20.18 ×[tex]10^{-3}[/tex] Kg/mol
According to the formula of root-mean-square velocities of gas molecules
[tex]v_{rms} = \sqrt{3RT/M}[/tex] where,
[tex]v_{rms}[/tex] = root-mean-square velocity
M = molar mass of gas (in kg per mole)
R = Molar gas constant = 8.314 J/mol/K
T = temperature (in kelvin)
[tex]v_{arg }[/tex] = [tex]\sqrt{3RT_{arg}/M }[/tex]
[tex]v_{arg} ^{2}[/tex] = [tex]3RT_{arg} /M[/tex]
1.20 ×1.20 ×[tex]10^{6\\[/tex] = 3 ×8.314×[tex]T_{arg}[/tex] /39.95 ×[tex]10^{-3}[/tex]
[tex]T_{arg}[/tex] = 1.44 × 39.95 ×[tex]10^{3}[/tex] / 24.942
[tex]T_{arg}[/tex] = 2306.47 K
Now,
RMS velocity is directly proportional to [tex]\sqrt{T}[/tex] and inversely proportional to [tex]\sqrt{M}[/tex]
[tex]v_{rms}[/tex] [tex]\alpha[/tex] [tex]\sqrt{T}[/tex] and [tex]v_{rms} \frac{1}{\alpha } \sqrt{M}[/tex]
[tex]\frac{v_{ne} }{v_{ar} }[/tex] = [tex]\sqrt{\frac{T_{ne} }{T_{ar} } }[/tex]× [tex]\sqrt{\frac{M_{ar} }{M_{ne} } }[/tex]
According to equation 1
[tex]\sqrt{\frac{T_{ne} }{T_{ar} } }[/tex] × [tex]\sqrt{\frac{M_{ar} }{M_{ne} } }[/tex] = 1.39
[tex]T_{ne}[/tex] = 1.39 ×1.39 × 2306.47 × 20.18 / 39.95
[tex]T_{ne}[/tex] = 2251.03K
Change in temp ΔT = 2306.47-2251.03= 55.44 K
Hence, 55.44 K is the temperature that need to change in order for the neon gas to be 39.0% faster than the RMS speed of the argon.
Learn more about Root-mean-square velocity here https://brainly.com/question/25806742
#SPJ4
There are several ways to model a compound. One type of model is shown.
4 C's are connected in a line by 3 black lines. The C on the left has 3 H's attached to it each by a black line. The next C has 1 H attached by a black line and 1 O attached by 2 black lines. The next C has 2 H's attached to it by 1 black line each. The last C has 2 H's attached to it by 1 black line each and 1 O attached by a single black line. That O has an H attached to it by 1 black line.
What is the chemical formula for the molecule represented by the model?
CHO
C4H9O2
C4H8O
C3H8O2
The chemical formula will be [tex]C_4H_9O_2[/tex].
Chemical formula
From the model, there are a total of 4 carbon atoms, 9 hydrogen atoms, and 2 oxygen atoms.
All the atoms are bonded to each other accordingly.
Thus, the only plausible chemical formula for the compound is [tex]C_4H_9O_2[/tex]
All other available options fall short in one way or the other as far as the number of atoms of each element in the compound is concerned.
More on chemical formulas can be found here: https://brainly.com/question/11995171
#SPJ1
A Calorie unit used in food is equal to the amount of energy necessary to raise the temperature of 1 kilogram of water ________ degrees) Celsius.
A Calorie unit used in food is equal to the amount of energy necessary to raise the temperature of 1 kilogram of water by 1 degrees Celsius.
What is One Calorie ?The amount of heat energy required to raise the temperature by 1 gram of water through 1°C is known as One Calorie.
1 Calorie = 4.18 J
Thus from the above conclusion we can say that A Calorie unit used in food is equal to the amount of energy necessary to raise the temperature of 1 kilogram of water by 1 degrees Celsius.
Learn more about the One calorie here: https://brainly.com/question/1061571
#SPJ4
In the bohr model of the hydrogen atom, the energy required to excite an electron from n = 2 to n = 3 is _______________ the energy required to excite an electron from n = 3 to n = 4?
In the bohr model of the hydrogen atom, the energy required to excite an electron from n = 2 to n = 3 is greater than the energy required to excite an electron from n = 3 to n = 4
Bohr's energy levels:
The essential concept of Bohr's atomic model is that electrons occupy specified orbitals that call for the electron to have a certain amount of energy. An electron needs to be in one of the permitted orbitals and have the correct amount of energy needed for that orbit in order to be in the electron cloud of an atom. An electron would require less energy to orbit near the nucleus, while an electron would need more energy to orbit away from the nucleus. Energy levels are the potential orbits. One of Bohr's models' flaws was that he was unable to explain why just specific energy levels or orbits were permitted.
It is evident that the energy required to escape an electron from n=2 to n=3 is greater than the energy required to exit an electron from n=3 to n=4. This is because as n increases, the energy levels move closer to one another.
Learn more about Bohr's model here:
https://brainly.com/question/3964366
#SPJ4
Magnesium has an HCP crystal structure, a c/a ratio of 1.635, an atomic weight of 24.305 g/mol, and a density of 1.74 g/cm3. Compute the atomic radius for Mg.
Atomic radius is1.349*10-23
hcp unit cell you can see that that the spheres touch each other along
so 2rMg = a where rMg is the radius of a Mg ion and = 0.6745*10^-23
There are three levels of atoms in the hcp structure.
Six atoms form a hexagonal arrangement in the top and bottom layers, while a seventh atom sits in the centre of the hexagonal arrangement.
Three atoms in the intermediate layer are tucked away in the top and bottom plane's triangular grooves.
Mg hcp c/a = 1.635
hcp is close-packed example ABABAB etc
V = sin(60)*a*a*1.635 a
V = 1.635 *0.866*a^3
V = 1.887*a^3 cm3
Z = 2 (atoms inside unit cell)
Mass inside unit cell is = (2 * 24.305)/(6.022*10^23) = 8.071*10^-23 g
D =M/V
1.74 = 8.071*10^-23/1.887*a^3
a^3 = 8.071*10^-23/1.887*1.74 = 2.458*10^-23
a = 1.349*10^-23
Hence Atomic radius is 1.349*10^-23
Learn more about Atomic radius here
https://brainly.com/question/15255548
#SPJ4