Answer:
1.73 m/s²
Explanation:
Given:
Δx = 250 m
v₀ = 0 m/s
t = 17 s
Find: a
Δx = v₀ t + ½ at²
250 m = (0 m/s) (17 s) + ½ a (17 s)²
a = 1.73 m/s²
The acceleration of this object is 1.730 meter per seconds square.
Given the following data:
Initial velocity = 2.5 m/s (since the object is starting from rest).Time = 17 seconds.To find the acceleration of this object, we would use the second equation of motion.
Mathematically, the second equation of motion is given by the formula;
[tex]S = ut + \frac{1}{2} at^2[/tex]
Where:
S is the displacement or distance covered.u is the initial velocity.a is the acceleration.t is the time measured in seconds.Substituting the given values into the formula, we have;
[tex]250 = 0(17) + \frac{1}{2} (a)(17^2)\\\\250 = \frac{1}{2} (289)a\\\\250 = 144.5a\\\\a = \frac{250}{144.5}[/tex]
Acceleration, a = 1.730 [tex]m/s^2[/tex]
Therefore, the acceleration of this object is 1.730 meter per seconds square.
Read more: https://brainly.com/question/7998145
Part A
What is the magnitude of the momentum of a 0.0073-kg marble whose speed is 0.65 m/s?
Express your answer to two significant figures and include appropriate units.
Part B
What is the speed of a 0.136-kg baseball whose momentum has a magnitude of 3.14 kg⋅m/s?
Express your answer to two significant figures and include appropriate units.
Answer:
(A). The magnitude of the momentum of the marble is 0.004745 kg m/s.
(B). The speed of baseball is 23.0 m/s
Explanation:
Given that,
Mass of marble = 0.0073 kg
Speed = 0.65 m/s
(A). We need to calculate the magnitude of the momentum of the marble
Using formula of momentum
[tex]p = mv[/tex]
Where, m = mass
v = velocity
Put the value into the formula
[tex]p=0.0073\times0.65[/tex]
[tex]p=0.004745\ kg m/s[/tex]
(B). Mass of baseball = 0.136 kg
Momentum of baseball = 3.14 kg m/s
We need to calculate the speed of baseball
Using formula of momentum
[tex]p=mv[/tex]
[tex]v=\dfrac{p}{m}[/tex]
Put the value into the formula
[tex]v=\dfrac{3.14}{0.136}[/tex]
[tex]v=23.0\ m/s[/tex]
Hence, (A). The magnitude of the momentum of the marble is 0.004745 kg m/s.
(B). The speed of baseball is 23.0 m/s
Does the US use the metric system? Please Only Real Answers Like Yes Or No Or yes because...... no because...... Thank You
Answer:
No
Explanation: It is the only country that does not. Hope this helped :)
A large negatively charged object is placed on a wooden table. A neutral metallic ball rolls straight towards the object but stops before it touches it. A second neutral metallic ball rolls up along the path followed by the first ball, strikes the first ball driving it a bit closer to the negatively charged object and stops. After all balls have stopped rolling, the first ball is closer to the negatively charged object than is the second ball. At no time did either ball touch the charged object. Which statement is correct concerning the final charge on each ball
Answer:
the charge of each small sphere, which is + Q / 2
Explanation:
For this exercise we must use the fact that a charged object induces charges on nearby bodies
Induced charge comes from the fact that charges of the same sign repel and charges of different signs attract.
In this case the large, fixed ball with a -Q charge induces a positive charge in the nearest part and the negative charges are repelled to the furthest point, but the net charge on the metallic sphere remains zero. It should be emphasized that since the charges are of different signs, there is an attractive force between the two spheres.
This first metallic sphere now has a negative charge on the back, this charge induces a positive charge on the second sphere, as the charges are of a different sign, they attract each other, which is why the force is attractive.
When the first sphere stops the second sphere hits it, at this moment the charge of the two spheres is equal, therefore the induced charge in the two spheres is + Q. When the two spheres are separated, the charge on each of them is half, that is, the sphere has a charge + Q / 2 and the second sphere has a charge + Q / 2.
Therefore the first sphere is subjected to two forces: an attractive force with the large sphere of charge -Q and a repulsive force with the second sphere of charge + Q / 2.
So the first sphere must approach the big ball and the second sphere must move away from the big sphere.
This is the process of the movement of this exercise, unfortunately the statements with which to compare this process do not appear, but one of the most common questions of what is the charge of each small sphere, which is + Q / 2
Lizard: A lizard is running in a straight line according to the following: xx(tt) = tt3⁄3 − tt2 + tt He starts at tt = 0. (a) Determine vv(tt). (b) When is the lizard at rest? (c) When is the lizard moving in the positive xx direction? (d) When is the lizard moving in the negative xx direction? (e) When does the lizard have zero acceleration?
Answer:
Explanation:
a ) x ( t ) = t³ / 3 - t² + t
v = dx / dt = 3 t² / 3 - 2 t + 1 = t² - 2 t + 1
b ) lizard is at rest , v( t ) = 0
t² - 2 t + 1 = 0
( t - 1 )² = 0
t = 1
c )
velocity is positive when
t² - 2 t + 1 > 0
( t - 1 ) ² > 0
Here we see that LHS is a square so it is always positive whatever be the value of t
So velocity is always positive or lizard is always moving in positive x direction .
d ) It never moves in negative x direction .
e )
a ( t ) = dv / dt = 2t - 2
t = 1
so it has zero acceleration at t = 0 .
The bonds between molecules store ____ Energy?
Answer:
chemical energy
Explanation:
Answer:
chemical energy
Explanation:
Energy is also stored in the covalent bonds holding atoms together in molecules. ... the difference in the amount of free energy given off as the original, reacting molecules fly apart, and the amount of free energy absorbed as the new covalent bonds form is left in the environment, often as light and/or heat.
6
Following an inelastic collision, what can kinetic energy be converted into? Check all that apply.
heat
impulse
momentum
potential energy
sound
Mark this and return
Save and Exit
Next
Submit
Answer:
Heat, potential energy, and sound.
Explanation:
Edgenuity says so
The characteristics of the inelastic shocks allow to find the correct answers of in which the kinetic energy can be transformed are:
Heat Potential energy Sound.
In a collision the total momentum of the system is conserved, this is an important principle of physics, we have two types of collisions:
Elastic. In this case the kinetic energy of the system is conserved. Inelastic. In this case the initial kinetic energy is not conserved.
In inelastic collision, part of the energy of the movement is transformed into potential energy of configuration of the system.
Let's analyze the different answers:
a) Heat.
True. Heat is a form of energy that, due to the change in the relative friction motion of bodies, is one of the greatest sources of transformation of energy into configuration power energy.
b) Impulse.
False. The impulse is the change of the momentum of the system and this is conserved, therefore the momentum is also conserved.
c) Momentum
False. Momentum is preserved in all crashes.
d) Potential energy.
True. Power energy is a configuration energy, therefore kinetic energy can be transformed into potential energy.
e) The sound.
True. Sound is a wave that carries energy, therefore kinetic energy can be transformed into traveling sound waves.
In conclusion, using the characteristics of inelastic shocks, we can find the correct answers that the kinetic energy can be transformed into are:
Heat Potential energy Sound.
Learn more here: brainly.com/question/24616147
Ricardo finds an online site about the gas laws. The site shows the equation below for Charles’s law. What change would correct the error on the site? “Charles’s law” should read “Gay-Lussac’s law,” which explains changes in volume and temperature. The symbol for T2 should be smaller than for T1 because if volume increases, then temperature should decrease. Each T should be replaced by a P in the equation because Charles’s law describes changes in volume and pressure. The volume should be divided by temperature on each side of the equation.
Answer:
D. The volume should be divided by temperature on each side of the equation.
Explanation:
Charles's Law is [tex]\frac{V_{1} }{T_{1} } = \frac{V_{2} }{T_{2} }[/tex].
Answer:
The volume should be divided by temperature on each side of the equation.
Explanation:
How does the energy in matter affect the state?
Answer:
Because of melting and freezing a higher heat will make something a plasma or liquid by melting it. by freezing you can make a liquid or gas solid.
Explanation:
Q17: A quantity has a unit of Kg.m-1.s-1, then its dimension is:
(a) [M2 L2 T?]
(b) M L?T
(c) (M2 LT]
(d) [M L-1 T-1]
(e) [M L-11-2]
Answer:
It's dimension is (d) [M L-1 T-1]
where do plants get the energy they need for photosynthesis
(A) leaves
(B) the sun
(C) sugars
(D) water
they get their energy from photosynthesis, so the answer would be (B) the sun
How did oxygen get into the earths atmosphere in its early days? plz explain
Answer:
The answer is tiny organisms known as cyanobacteria, or blue-green algae. These microbes conduct photosynthesis: using sunshine, water and carbon dioxide to produce carbohydrates and, yes, oxygen. In fact, all the plants on Earth incorporate symbiotic cyanobacteria (known as chloroplasts) to do their photosynthesis for them down to this day.
Explanation:
Sally walks to the store at a rate of 3 m/s for 15 seconds. She stops at a crosswalk for 4 seconds until the sign tells her she can go. Sally ran across the street at 5 m/s for 3 seconds until she reached the other side. She then walked the rest of the way to the store at 3 m/s. If the store was 100 m away from where Sally started originally and it took her 250 seconds to get there, what was her average speed?
Answer:
Average speed= 0.4 m/sExplanation:
step one:
simply put average speed is defined as the total distance travelled divided by the total time taken.
step two:
given data
total distance is the distance from where she started to the store
which is 100 m
also, we are told that the total time taken is 250 seconds
step three:
Hence we can compute the average speed as
average speed= 100/250
average speed= 0.4 m/s
the force which slow down a paper aeroplane moving through the air is called
The paper plane slows down when flying in the air due to air resistance or the friction due to the air around it. As the paper plane have flat surfaces and more surface area, the air resists it's motion more than before. If the paper plane is moving towards left, then friction acts towards left.
The friction always act opposite to the direction of paper plane and resists its motion. Hence, we can say that paper plane slows due to Frictional Force [tex]\red{\bullet}[/tex]
#CarryOnLearning
━━━━━━━━━━━━━━━━━━━━
Which phenomenon related to light allows scientists to measure the distance between a star and Earth? A. Dark patches appear in the electromagnetic spectrum emitted by stars. B. Light waves spread out as they move farther from their source. C. Stars have different colors based on their temperature. D. Stars have unique elements that make up their atmospheres.
Answer:
The Answer Is B not C
Explanation:
Answer:b
Explanation:
It takes you 9.5 min to walk with an average velocity of 1.2 m/s to the north
from the bus stop to the museum entrance. What is your displacement?
The direction of movement of the body or item is defined by velocity. Your total displacement will be 684 meters.
What is Velocity?The direction of movement of the body or item is defined by velocity. Speed is fundamentally a scalar number. Velocity is, in essence, a vector quantity. It is the pace at which distance changes. It is the displacement rate of change.
Given that It takes you 9.5 min to walk with an average velocity of 1.2 m/s to the north from the bus stop to the museum entrance.
Time = 9.5 minutes = 9.5 × 60 seconds = 570 seconds
Average Velocity = 1.2 m/s
Now, the displacement made by you can be written as,
Velocity = Displacement / Time
1.2 m/sec = Displacement / 570 seconds
Displacement = 1.2 m/sec × 570 seconds
Displacement = 684 meter
Hence, your total displacement will be 684 meters.
Learn more about Velocity here:
https://brainly.com/question/18084516
#SPJ2
What the differences between static and kinetic friction?
Answer:
Static friction prevents a stationary object from moving while kinetic or dynamic friction slows down a moving object.
Explanation:
Static Friction is the maximum force that must be overcome before a stationary object begins to move, while kinetic or dynamic friction is the maximum force that must be overcome for an object in motion to continue moving at a uniform velocity.
Static friction keeps a stationary object at rest, once the Force of Static friction is overcome, the Force of Kinetic friction is what slows down the moving object.
Suppose a wheel with a tire mounted on it is rotating at the constant rate of 3.273.27 times a second. A tack is stuck in the tire at a distance of 0.365 m0.365 m from the rotation axis. Noting that for every rotation the tack travels one circumference, find the tack's tangential speed. tangential speed: m/sm/s What is the tack's centripetal acceleration?
Answer:
The tangential speed is [tex]v = 7.5 m/s [/tex]
The centripetal acceleration is [tex]a = 154 \ m/s^2[/tex]
Explanation
Generally the angular velocity is mathematically represented as
[tex]w = e * \frac{ 2 \ pi \ rad }{s}[/tex]
substituting 3.27 rev/s for e we have that
[tex]w = 3.27 * \frac{ 2 \ pi \ rad }{s}[/tex]
=> [tex]w = 20.55 \ rad /s[/tex]
The tangential speed is mathematically represented as
[tex]v = w * r[/tex]
substituting 0.365 m for r we have that
[tex]v = 20.55 * 0.365 [/tex]
=> [tex]v = 7.5 m/s [/tex]
Generally the centripetal acceleration is mathematically represented as
[tex]a = \frac{v^2}{r}[/tex]
=> [tex]a = \frac{7.5^2}{ 0.365}[/tex]
=> [tex]a = 154 \ m/s^2[/tex]
Which is the process by which a solid changes to a liquid? O condensation O evaporation O melting sublimation
Answer:
Melting
Explanation:
The process in which a solid changes to a liquid is called melting. This process is also termed as fusion. Due to application of heat and pressure, the internal energy of a solid increases and the molecules become far from each other due to which it starts to melt.
Hence, the correct option is (c) "melting".
Answer:
c. melting
Explanation:
took the quiz on edge
A fisherman’s boat moves up and down periodically due to water waves. The boat travels from its highest to its lowest point, a vertical distance of 0.60 m, in 2.0 s. The horizontal distance between wave crests is 7.0 m. (a) What is the period of the wave motion? (b) What is the frequency of the wave motion? (c) W
Complete question is;
A fisherman’s boat moves up and down periodically due to water waves. The boat travels from its highest to its lowest point, a vertical distance of 0.60 m, in 2.0 s. The horizontal distance between wave crests is 7.0 m. (a) What is the period of the wave motion? (b) What is the frequency of the wave motion? (c) What is the amplitude of each wave
Answer:
A) Period = 4 s
B) Frequency = 0.25 Hz
C) Amplitude = 0.3 m
Explanation:
A) We are told that the distance it takes for the boat to travel from its highest to its lowest point is 2 s.
Thus, t = 2 s
Now, in waves, period (T) it the time between two successive waves.
This means that;
T = 2t
T = 2 × 2
T = 4 s
B) Also, the frequency(f) is given by the formula;
f = 1/T
f = 1/4
f = 0.25 Hz
C) We are given a vertical distance of 0.60 m from highest to lowest point of waves.
Now, amplitude is half of this distance.
Thus;
Amplitude(A) = 0.6/2
A = 0.3 m
What is the frequency in Hz of a wave that travels at 2,500 m/s with a wavelength of 100 m?
Answer:
f = 25 Hz
Explanation:
We know that :
[tex]v = f*d\\=> f = \frac{v}{d}[/tex] where f = frequency ; v = speed & d = wavelength
Here in the question ,
Speed = 2500 m/s
Wavelength = 100 m
Using the above formula ,
Frequency = [tex]\frac{2500}{100} = 25 Hz[/tex]
When a piece of paper is held with one face perpendicular to a uniform electric field the flux through it is 25 N .m2 /C. When the paper is turned 25° with respect to the field the flux through it is:_____.1. 02. 12 N .m2 /C3. 21 N .m2 /C4. 23 N .m2 /C5. 25 N .m2 /CB. A charged point particle is placed at the center of a spherical Gaussian surface. The electric flux is changed if:______.1. the sphere is replaced by a cube of the same volume2. the sphere is replaced by a cube of one-tenth the volume3. the point charge is moved off center (but still inside the original sphere)4. the point charge is moved to just outside the sphere5. a second point charge is placed just outside the sphereC. A charge of 0.8 × 10−9 C is placed at the center of a cube that measures 5 m along each edge. What is the electric flux through any 2 faces of the cube?
Answer:
1) 23 N.m²/C
2) The point charge is moved just outside the sphere
3) 30 N.m²/C
Explanation:
1) The flux through the field can be gotten by finding the dot product of the angle the later is turned, and the given uniform electric field.
25 * cos 25 =
25 * 0.9063 =
22.66 or approximately, 23 N.m²/C
2) The point charge is moved just outside the sphere
3) Using Gauss' Law, the electric flux through one face of the cube is given as Φ = Q / 6ε₀, thus,
Φ = 0.8*10^-9 / 6 * 8.85*10^-12
Φ = 0.8*10^-9 / 5.311*10^-11
Φ = 15 N.m²/C
And therefore, the flux through any 2 faces of the cube is 2 * 15 = 30 N.m²/C
Do you think a hurricane can be considered to be a heat machine? Why?
Answer:
No
Explanation:
Hurricanes always do not bring heat. For example, Hurricane Sandy brought snow.
A simple model of a hydrogen atom is a positive point charge +e (representing the proton) at the center of a ring of radius a with negative charge −e distributed uniformly around the ring (representing the electron in orbit around the proton). Find the magnitude of the total electric field due to this charge distribution at a point a distance a from the proton and perpendicular to the plane of the ring.
Answer:
Now e is due to the ring at a
So
We say
1/4πEo(ea/ a²+a²)^3/2
= 1/4πEo ea/2√2a³
So here E is faced towards the ring
Next is E due to a point at the centre
So
E² = 1/4πEo ( e/a²)
Finally we get the total
Et= E²-E
= e/4πEo(2√2-1/2√2)
So the direction here is away from the ring
is it true or false if a force is a push or a pull on a object
Answer: true
Explanation: a force can be anything that effects an object, as long as the object moves
This ball is technology too! It can be
rolled, kicked, or thrown. Is that a need
or a want?
Answer:
want
Explanation:
people always want the new thing especially if its technology
Father drove 176 km in 7 hours. For the first 92 km, he spent
for 4 hours. What was his average speed for the remaining
journey?
km/h
Answer:
28km/h
Explanation:
92km = 4 hours
176 - 92 = 84
84km = 3 hours
84/3 = 28
28km/h
Hopefully this helps you :)
pls mark brainlest ;)
A baseball pitcher's average fastball pitch speed is 98.6 mph. What is that speed in
m/s?
Answer:
44.078 m/s
Explanation:
convert 98.6 miles to meters then convert the hour to minutes and minutes to seconds
6. What is Mass????????????????
Two point charges are on the x-axis. One charge, q1 = 10 nC, is located at the origin, and the othercharge, q2 = 18 nC, is located at x = 9.0 m. What is the force on q2?a) 20 nN in the positive x-directionb) 20 pN in the positive x-directionc) 20 nN in the negative x-directiond) 20 pN in the negative x-directione) 180 nN in the positive x-direction
Answer:
The correct option is A
Explanation:
Generally the force on [tex]q_2[/tex] is mathematically represented as
[tex]F_2 = \frac{ k * q_1 * q_2 }{ x^2}[/tex]
here k is the coulombs constant with value [tex]k = 9*10^{9}\ kg\cdot m^3\cdot s^{-4} \cdot A^{-2}.[/tex]
=> [tex]F_2 = \frac{ 9*10^{9} * 10*10^{-9} * 18*10^{-9} }{ 9^2}[/tex]
=> [tex]F_2 = 2*10^{-8} \ N[/tex]
=> [tex]F_2 = 20*10^{-9} \ N[/tex]
=> [tex]F_2 = 20nN[/tex]
The direction is in the positive x-axis because both charge are of the same polarity so the will repel hence [tex]q_2[/tex] will move toward the positive x-axis
Protons are launched with an initial speed 9550 m/s at 37° above the horizontal, into a region where a uniform vertical electric field is present. The protons hit a target at a horizontal distance 1.27 mm from the point where the protons are launched. Find the electric field, the time of flight, and the maximum height reached by the protons above the point where they were launched.
Answer:
E=720,5 N/C
H=0,24mm
Explanation: