Answer:
4.14516129 g/mL
Explanation:
The density can be found with the following formula.
[tex]d= \frac{m}{v}[/tex]
where [tex]m[/tex] is the mass and [tex]v[/tex] is the volume.
We know the mass is 25.7 grams. We must find the volume.
The volume is equal to the volume of water that is displaced. Subtract the initial volume from the final volume.
⇒ final volume - initial volume
The initial volume is 35.5 mL and the final volume is 41.7 mL.
⇒ 41.7 mL - 35.5 mL
⇒ 6.2 mL
The volume of the aluminum piece is 6.2 mL.
Now we know the mass and the volume.
[tex]m= 25.7 g\\v=6.2 mL[/tex]
Substitute the values into the formula.
[tex]d=\frac{m}{v}[/tex]
[tex]d=\frac{25.7 g}{6.2 mL}[/tex]
[tex]d=4.14516129 g/mL[/tex]
The density of the aluminum sample is 4.14516129 g/mL
If 24.1 g of sodium hydroxide react with 22.0 g of hydrochloric acid to form 35.3g
of table salt, how much water was formed? *
Answer:
10.85 g of H2O.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
NaOH + HCl —> NaCl + H2O
Next, we shall determine the mass of NaOH that reacted and the mass of H2O produced from the balanced equation.
These can be obtained as illustrated below:
Molar mass of NaOH = 23 + 16 + 1 = 40 g/mol
Mass of NaOH from the balanced equation = 1 × 40 = 40 g
Molar mass of H2O = (2×1) + 16 = 2 + 16 = 18 g/mol
Mass of H2O from the balanced equation = 1 × 18 = 18 g
Summary:
From the balanced equation above,
40 g of NaOH reacted to produce 18 g of H2O.
Finally, we shall determine the mass of water, H2O produced from the reaction as follow:
From the balanced equation above,
40 g of NaOH reacted to produce 18 g of H2O.
Therefore, 24.1 g of NaOH will react to produce = (24.1 × 18)/40 = 10.85 g of H2O.
Therefore, 10.85 g of H2O were produced from the reaction.
If you have 45.6mL of a liquid and its
mass is measured at 46.83g, what is its
density? What liquid is it?
The allowable concentration level of vinyl chloride, C2H3Cl, in the atmosphere in a chemical plant is 2.0 x 10-6 g/L. a. How many moles of vinyl chloride in each liter does this represent?
Answer:
3.2x10⁻⁸ moles of vinyl chloride per liter
Explanation:
The concentration of C₂H₃Cl is 2.0x10⁻⁶g/L. To find moles per liter we need to convert this mass to moles using molar mass of vinyl chloride:
Molar mass C₂H₃Cl:
2C = 2*12g/mol = 24
3H = 3*1g/mol = 3
Cl = 1*35g/mol = 35
Molar mass = 35g/mol + 3g/mol + 24g/mol = 62g/mol
2.0x10⁻⁶g * (1mol / 62g) =
3.2x10⁻⁸ moles of vinyl chloride per literis water a compound?
Answer:
Yes, actually it is a compound.
Explanation:
There are important differences between the properties of a mixture and a compound. In this table, the column Mixture refers to the gasses hydrogen and oxygen, and the column named Compound refers to water.
b. What is the mass of a piece of wood that has a volume of
25.3cm® and a density of 0.75g/cm?
Answer:
Explanation:
[tex]\frac{mass}{volume} =density\\mass=volume \times density=25.3 \times 0.75=18.975 ~gm[/tex]
Consider the orbitals shown below
Which of these diagrams correctly shows the electron configuration for the atom with one more electron than the one shown above?
Answer:b
Explanation:
The option that correctly shows the electron configuration for the atom with one more electron than the one shown above would be the second diagram.
According to Hund's rule, electrons are distributed into empty orbitals singly before pairing can start.
Following the rule:
diagram 1 is incorrect because the first 3p orbital is already paired while the third one remains empty.diagram 3 is incorrect because the orientation of the electron in the third p orbital is wrongdiagram 4 is incorrect because the first 3p orbital already has 2 electrons (with a disoriented one) while the third 3p orbital remains empty.The only diagram that follows Hund's rule is diagram 2.
More on Hund's rule can be found here: https://brainly.com/question/11653230
What is a sediment and how it is formed?
Answer:
Sedimentary rocks are formed when sediment is deposited out of air, ice, wind, gravity, or water flows carrying the particles in suspension. This sediment is often formed when weathering and erosion break down a rock into loose material in a source area.
Im not sure if this answers your question but here!
Sedimentary rocks are one of three main types of rocks, along with igneous and metamorphic. They are formed on or near the Earth’s surface from the compression of ocean sediments or other processes.
Reaction coordinates represent: A. The balanced equation for a chemical reaction. B. The change in pH for a chemical reaction. C. The potential energy change for a chemical reaction. D. None of the above
Answer:
C. The potential energy change for a chemical reaction.
Explanation:
The reaction coordinate q illustrates, graphically, the energy changes during exothermic and endothermic reactions. This graphical representation of the energy changes in the course of a chemical reaction is known as reaction coordinates. A reaction coordinate is a graphical sequence of steps by which the reaction progresses from reactants through activated complexes to products. Reaction coordinates explain how far a reaction has proceeded towards the products or from the reactants.
From the images attached below, we can see the reaction coordinates in the reaction profiles.
What food is made up of gelatin and why does it have protein in it?
Answer:
gummy´s and it can be lofat gummy´s
Explanation:
1. _____ There are tracks from three different animals in the rock.
2. _____ One animal was chasing another animal.
3 _____. Two different animals died in this spot.
4. _____ When the animals walked here the ground was wet.
5. _____ One of the animals that died here had bony plates.
6. _____ One of the animals that died here had sharp teeth.
7. _____ The animal that had sharp teeth ate meat.
A. Observation
B. Inference
Answer:
1.Observation
2. Inference
3. Observation
4. Inference
5. Observation
6. Observation
7. Inference.
In two or more complete sentences explain how to balance the chemical equation, KClO3 ⟶ KCl + O2 and include all steps. Write your response in the essay box below.
Answer:
2KClO3 -------> 2KCl + 3O2
Explanation:
First, in balancing a chemical reaction such as the one given in the question, you should understand that for an equation to be balanced, the number of atoms and ions on both sides of the equation that is the right and left side must be equal. This follows the law of conservation of mass which tells us that matter can neither be created nor destroyed but can be changed into another form.
Next is to begin balancing the equation by identifying and writing down the substances given:
KCl03 ---------> KCl + O2
Next is to count he number of the individual atoms on each side and find out if they are the same on both sides and if not you must follow the next step.
Add a corresponding number and use it to multiply the atoms involved
KClO3 ---------> KCl + O2
Oxygen is 3 on the left side and two on the other side, so we multiply the left hand side by 2 and the right hand side by 3
2KClO3 -----> KCl + 3O2
The potassium and Chlorine are no longer balanced, so you multiply the right had=nd side of KCl by 2.
2KClO3 -----> 2KCl + 3O2
The reactionis herefore balanced as both sides have equal number of atoms and ions.
All scientific discoveries are made in a
laboratory.
True
False
pls helppp
Answer:
i would say false.
Explanation:
some discoveries are made as people continue exploring the world...........they are just prooved in the laboratory, while there are other which are still made in the lab and are also examined there.
the particles in water have less mobility than the particles in oxygen. Which statement best explains this observation? Water is always colder than oxygen. Water has a lower density than oxygen. Water particles have a greater kinetic energy. Water particles have strong intermolecular forces.
Answer:
Water particles have strong intermolecular forces.
Explanation:
Water molecules are affected by attraction and repulsion and that causes the water to have strong forces and intermolecular strength to be strong.
Water particles have strong intermolecular forces.
What are intramolecular forces?Intramolecular forces are the forces that keep atoms together inside a molecule. Intermolecular forces are forces that exist among molecules. determine intermolecular appeal between H-Cl molecules and intramolecular attraction within H-Cl molecules.
What are the strongest intramolecular forces?The most powerful intermolecular forces are dipole-dipole interactions. A dipole-dipole pressure is while the high-quality aspect of a polar molecule draws the bad facet of every other polar molecule.
Learn more about intermolecular forces here: https://brainly.com/question/25920008
#SPJ2
During freezing, a substance? -loses chemical energy -loses thermal energy -gains thermal energy -gains chemical energy
The process of melting a crystalline solid can be
reversed if the liquid is cooled. The change from the liquid state
to the solid state is called freezing. As the liquid cools, it loses
thermal energy. As a result, its particles slow down and come
closer together. Attractive forces begin to trap particles and the
crystals of a solid begin to form.
"The total kinetic energy of all the particles in a sample of
matter is called thermal energy. Thermal energy, an extensive
property, depends on the number of particles in a substance as
well as the amount of energy each particle has. If either the
number of particles or the amount of energy in each particle
changes, the thermal energy of the sample changes. With identically sized
samples, the warmer substance has a greater thermal energy."
Calculate the mass of one molecule of propane (C_3H_8)
What is the most important laboratory procedure to follow before leaving the lab area? A. Record all of your results in your lab notebook. B. Wash your hands thoroughly with soap and water. C. Make sure that rulers and thermometers are put away. D. Ask the teacher for permission to leave.
Answer:
Wash your hands thouroughly with soap and water
Explanation:
Guessing. Hope I get it right for a brainly
Answer:
B C E
Explanation:
are all correct
The emission spectrum for an element is? Select all that apply
Answer: You didn't give anything to select, however, the emission spectrum of a chemical element is frequencies of electromagnetic radiation emitted due to an atom or molecule making a transition from a high energy state to a lower energy state.
tell me answer........... fast
Answer:
45
Explanation:
1+4x1=5
2+5x2=12
3+6x3=21
5+8x5=45
A jogger runs 10 km East. She then stops and heads back west for 6 km. What is the jogger's distance? What is the jogger's displacement?
Answer:
distance is 16m
displacement 4m east
Which elements are present in ammonia and calculate its mass
Answer:
nitrogen and hydrogen
Its molecular mass is 17g
Explanation:
Ammonia = NH3
nitrogen= 14g
hydrogen= 1g × 3 =3
14+3=17
What name is given to a reaction that takes in energy from the surroundings?
Answer:
Endothermic reaction
Explanation:
Endothermic reactions take in energy from the surroundings.
Energy is a reactant in endothermic reactions, and the temperature of the surroundings will decrease because it took in energy.
Neutrons are about the same size as....
Answer:
proton
Explanation:
if it was not an isotope..
Point P(-4, 0) lies on the directed line segment AE. The endpoints are A(2,-6)
and E(x, y). What are the coordinates of point E such that AP is 3/4 of the
distance from A to E?
Answer: (10,-14) I think
Explanation:
Which of the following is a lanthanide
A. Gold (Au)
B. Americium (Am)
C. Barium (Ba)
D. Europium (Eu)
Answer:
Hope it helps.
Explanation:
The lanthanide (/ˈlænθənaɪd/) or lanthanoid (/ˈlænθənɔɪd/) series of chemical elements[1] comprises the 15 metallic chemical elements with atomic numbers 57–71, from lanthanum through lutetium.[2][3][4] These elements, along with the chemically similar elements scandium and yttrium, are often collectively known as the rare earth elements.
The informal chemical symbol Ln is used in general discussions of lanthanide chemistry to refer to any lanthanide. All but one of the lanthanides are f-block elements, corresponding to the filling of the 4f electron shell; depending on the source, either lanthanum or lutetium is considered a d-block element, but is included due to its chemical similarities with the other 14.[5] All lanthanide elements form trivalent cations, Ln3+, whose chemistry is largely determined by the ionic radius, which decreases steadily from lanthanum to lutetium.
They are called lanthanides because the elements in the series are chemically similar to lanthanum. Both lanthanum and lutetium have been labeled as group 3 elements, because they have a single valence electron in the 5d shell. However, both elements are often included in discussions of the chemistry of lanthanide elements. Lanthanum is the more often omitted of the two, because its placement as a group 3 element is somewhat more common in texts and for semantic reasons: since "lanthanide" means "like lanthanum", it has been argued that lanthanum cannot logically be a lanthanide, but IUPAC acknowledges its inclusion based on common usage.[6]
In presentations of the periodic table, the lanthanides and the actinides are customarily shown as two additional rows below the main body of the table,[2] with placeholders or else a selected single element of each series (either lanthanum and actinium, or lutetium and lawrencium) shown in a single cell of the main table, between barium and hafnium, and radium and rutherfordium, respectively. This convention is entirely a matter of aesthetics and formatting practicality; a rarely used wide-formatted periodic table inserts the lanthanide and actinide series in their proper places, as parts of the table's sixth and seventh rows (periods).
The 1985 International Union of Pure and Applied Chemistry “Red Book” (p. 45) recommends that "lanthanoid" is used rather than "lanthanide". The ending “-ide” normally indicates a negative ion. However, owing to wide current use, “lanthanide” is still allowed.
Answer:
D. Europium
Explanation:
I got this as a correct answer on apex
Which statement best describes a physical property of copper
Answer:A physical property is one that can be changed without altering the identity of a substance. These set of properties is not concentration dependent. They are used to describe matter. Examples are density, solubility, melting point, color and odor. For this case, the second option seems to fit the description. It can be reshaped by a force.
Explanation:
In a desert ecosystem, coyotes and rattlesnakes both eat the same type of mouse as a primary part of their diets. Recently, coyotes have been hunted and killed by people, decreasing the overall coyote population.
Answer:
there primary food source will still be the same
Explanation:
they will still ear mice but coyotesmay eat Humans if they are close because once they see humans they think they will be killed its there protectiong
Answer:
D. It will increase because coyotes are the competition.
Explanation:
Because Competition is When 2 organisms fight for the same thing, and sense rattlesnakes are the other competition they will increase because coyotes are being killed.
How many elements are represented in the formula CaCO3
Answer:
3
Explanation:
calcium (Ca)
carbon(C)
oxygen(O)
hope u like it ❤️❤️
For any question comment me
Answer:
3 different elements, 6 total in the Calcium Carbonate molecule
Explanation:
Ca=Calcium
C=Carbon
O=Oxygen (* 3)
What structures and materials are found in all cells?
Answer: the plasma membrane, the cytoplasm, ribosomes, and genetic material.
hope this helped
What is Thermal Energy?
What are octet and duplet rules ?
Answer:
DUPLET RULE: The tendency of an atom to acquire an outer most shell of two electrons is called duplet rule. OCTET RULE: The tendency of an atom to acquire an outermost shell of eight electrons is called the octet rule.