An electric current is transmitted through an aluminum wire that has been coiled several times around a piece of metal.
What the curved and looped arrows represent in the diagram?
a. magnetic field lines created by Earth's gravity acting on the wire
b. magnetic field lines created by Earth's magnetic field acting on the wire
c. magnetic field lines created when the aluminum wire removes the metal's magnetic field
d magnetic field lines created when the metal is inserted into the wire coil

Answers

Answer 1

The curved and looped arrows will represent the magnetic field lines created by Earth's magnetic field acting on the wire. Therefore the answer is (b).

Principles behind magnetic fields

The Earth's magnetic field can induce a magnetic field in the wire when it carries an electric current. This magnetic field is perpendicular to both the direction of the current flow and the Earth's magnetic field lines. The magnetic field produced by the current flowing through the wire interacts with the Earth's magnetic field, causing the magnetic field lines to loop around the wire in a specific direction. This phenomenon is known as the "right-hand rule" and is commonly used to determine the direction of the magnetic field produced by a current-carrying wire.

Learn more about magnetic field here:

https://brainly.com/question/26257705

#SPJ1


Related Questions

Question 24 Marks: 1 Resource recovery and reduction of solid wastes should startChoose one answer. a. at the point of generation b. at the sanitary landfill c. in the home d. at the transfer station

Answers

Resource recovery and reduction of solid wastes should start at the point of generation. So the correct option is a.

Resource recovery and reduction of solid wastes involve methods and practices aimed at minimizing the amount of waste generated, as well as recovering valuable resources from waste materials. The most effective and sustainable approach is to start the process of resource recovery and waste reduction at the point of generation, which is where waste is initially produced. This can include practices such as reducing waste generation through source reduction and waste prevention measures, reusing materials, recycling, and composting. By implementing waste reduction and resource recovery practices at the point of generation, such as in homes, businesses, and industries, we can minimize the environmental impact of waste disposal, conserve resources, and promote sustainability.

To know more about solid wastes,

https://brainly.com/question/14665452

#SPJ11

A loop conductor rotating in a constant magnetic field creates an electric current. true or false

Answers

True. A loop conductor rotating in a constant magnetic field creates an electric current is true.

Valid. At the point when a circle transmitter is pivoted in a consistent attractive field, it makes an electric flow. This peculiarity is known as electromagnetic acceptance and was first found by Michael Faraday in 1831. As per Faraday's law of electromagnetic enlistment, the attractive field going through a circle channel changes as the transmitter pivots, and this adjustment of transition prompts an electromotive power (EMF) in the conduit, bringing about an electric flow.

The heading of the prompted not entirely set in stone by the course of the adjustment of attractive transition. Consequently, a turning circle conveyor in a steady attractive field produces an exchanging flow (AC), and this rule is the premise of numerous electrical generators, engines, and different gadgets that utilization electromagnetic enlistment.

To learn more about magnetic field, refer:

https://brainly.com/question/14610578

#SPJ4

two blocks are connected as shown. when released, the 6.00-kg block accelerates downward and the 8.00-kg block accelerates to the right. each block has moved 2.00 m. consider the system as frictionless and the pulley massless. what is the total work done on the 8.00-kg block? using the work-energy theorem, find the speed of 8.00-kg block when it has moved 2.00 m if the system starts from rest.

Answers

To solve this problem, we'll use the following terms: work-energy theorem, potential energy, kinetic energy, and conservation of energy. So, the speed of the 8.00-kg block after moving 2.00 m is 5.42 m/s.


First, let's find the total work done on the 8.00-kg block. In this frictionless system, the only force acting on the 8.00-kg block is tension in the rope, and it's equal to the gravitational force acting on the 6.00-kg block. So, work done = force x distance.

Work done = (6.00 kg * 9.81 m/s²) * 2.00 m = 117.72 J

Now, let's use the work-energy theorem to find the speed of the 8.00-kg block after moving 2.00 m. The work-energy theorem states that work done on an object is equal to the change in its kinetic energy. Since the system starts from rest, the initial kinetic energy is zero.

Final kinetic energy = work done = 117.72 J

To find the speed, use the formula for kinetic energy: KE = 0.5 * m * v², where m is the mass and v is the velocity of the 8.00-kg block.

117.72 J = 0.5 * 8.00 kg * v²

Solving for v, we get:

v² = (117.72 J) / (0.5 * 8.00 kg) = 29.43 m²/s²
v = √29.43 m²/s² = 5.42 m/s

So, the speed of the 8.00-kg block after moving 2.00 m is 5.42 m/s.

Visit here to learn more about work-energy theorem  : https://brainly.com/question/30560150
#SPJ11

Question 38 Marks: 1 Water in wading pools should be completely recirculated everyChoose one answer. a. 1 to 2 hours b. 12 hours c. 6 hours d. 24 hours

Answers

The correct answer is c. 6 hours. Water in wading pools should be completely recirculated every 6 hours to maintain safe and clean water conditions for children. This helps to prevent the growth of harmful bacteria and other contaminants.

Wading pools are shallow pools typically used by children for play and recreation. Because the water in these pools is often not treated with chemicals like chlorine, it is important to ensure that the water is recirculated frequently to maintain its cleanliness and prevent the spread of waterborne illnesses. According to industry standards and guidelines, the water in wading pools should be completely recirculated every 6 hours. This helps to ensure that the water is adequately filtered and treated, and that any contaminants or bacteria are removed before they can cause harm to swimmers.

Learn more about wading pools here:

https://brainly.com/question/28780998

#SPJ11

consider a cart initially pushed against a spring as shown. it is then released and accelerates away. consider a system of the cart. which of the following describe the system? your response has been hidden for privacy. click show response below to see it, or click change response if you want to replace your current response with a new one. a. it is closed and isolated. b. it is closed but not isolated. c. it is not closed but is isolated. d. it is not closed or isolated.

Answers

The system you described, where a cart is initially pushed against a spring and then released, can be classified as option B: it is closed but not isolated.

This is because the system's energy (spring potential energy and cart's kinetic energy) and mass are conserved, but it is still influenced by external forces such as the spring force and potential friction.

spring potential is the potential energy stored in spring when it is stretched or deformed. It is equal to force multiplied by displacement. This energy is stored in the spring by virtue of its position. It is the work done to stretch the spring.

When spring is stretched, it undergoes displacement. It comes to its equilibrium position when force is removed. So, it exerts an equal and opposite force When it is stretched. Work is done by this force that is stored in the form of potential energy.

Since potential energy = force × displacement

and, force = spring constant × displacement

So, potential energy = spring constant × displacement²

Thus, PE = K × x²

Visit here to learn more about spring potential  : https://brainly.com/question/30765703
#SPJ11

Find the word described by these clues:
*the position value of the letter c in the alphabet is 4.
*The alphabetical position of the last 5 letters of the word adds up to the same total alphabetical position as the first letter in the word.
*the sum of the alphabetical positions of all of the letters in the word is 53
*the sum of the positions of the first and last letters in the word is 28
*the second and fifth letters in the word are not consonants
*the word has 6 letters
*the alphabetical position of the third letter in the word is right after the alphabetical position of the fifth letter in the word
* capital versions of the middle and fourth letters in the word look similar
*if you subtract ONE from every NUMERAL above, you'll get true values. They are currently false.

Answers

The word described by these clues is "seance".

When someone asks you to "find the word described by these clues, " you need to figure out what word matches all of the given criteria or clues. This often involves solving a puzzle or riddle.

Here's how the clues match up with the letters in the word:

The position value of the letter c in the alphabet is 4. The alphabetical position of the last 5 letters of the word adds up to the same total alphabetical position as the first letter in the word (s = 19, e = 5, a = 1, n = 14, c = 3; 19 + 5 + 1 + 14 + 3 = 42; 42 = 19).The sum of the alphabetical positions of all of the letters in the word is 53 (s = 19, e = 5, a = 1, n = 14, c = 3, e = 5; 19 + 5 + 1 + 14 + 3 + 5 = 47).The sum of the positions of the first and last letters in the word is 28 (s = 19, e = 5, a = 1, n = 14, c = 3, e = 5; 19 + 5 = 24; 24 + 4 = 28).The second and fifth letters in the word are not consonants (e and e).The word has 6 letters.The alphabetical position of the third letter in the word is right after the alphabetical position of the fifth letter in the word (s = 19, e = 5, a = 1, n = 14, c = 3, e = 5; 14 + 1 = 15; 15 + 1 = 16; 16 = n).Capital versions of the middle and fourth letters in the word look similar (a and n).If you subtract ONE from every NUMERAL above, you'll get true values. They are currently false. (The statement is true for this word as well.)

Therefore, The word described by these clues is "seance".

To learn more about context clues click:

brainly.com/question/3072470

#SPJ1

Conductors in Parallel: If we have an 800 ampere service with a calculated demand load of 750 ampere, what size 75 degree C conductors would be required if parallel in two raceways?

Answers

4/0 AWG conductors would be suitable for parallel runs in each raceway for an 800A service with a 750A demand.

To decide the size of the guides required for equal runs, the ampacity of every guide ought to be determined first. Since we have two raceways, the complete ampacity of the equal runs would be partitioned similarly between them.

Utilizing the 800 ampere administration and a determined interest heap of 750 amperes, we can compute the necessary ampacity for every guide by isolating the all out ampacity by the quantity of guides in equal (two).

800 amps/2 = 400 amps for every guide

Then, we want to allude to the NEC ampacity graph to decide the fitting wire size. For 75 degree Celsius guides, a 4/0 AWG guide has an ampacity of 405 amps. Thusly, a 4/0 AWG guide would be reasonable for the equal runs in every raceway, since it has an ampacity more prominent than the expected 400 amps for each guide.

To learn more about Conductor, refer:

https://brainly.com/question/30204697

#SPJ4

The complete question is:

If an 800A service has a calculated load of 750A, what size 75 degree C conductors are required if the conductors are paralleled in two raceways? All termanitions are 75 degree C.

a. 4/0 AWG

b. 250 kcmil

c. 500 kcmil

d. 750 kcmil

Impact energy may be transferred into the test sample in which various ways?

Answers

Impact energy may be transferred into the test sample through compression, tension, bending, shearing, torsion, or a combination of these.

Impact testing is a common method used to evaluate the toughness and strength of materials by measuring their ability to absorb energy during an impact event. During an impact, energy is transferred from the impactor to the test sample, and the way that energy is transferred can have a significant impact on the behavior of the material.

There are several ways in which impact energy can be transferred into a test sample, including compression, tension, bending, shearing, torsion, and a combination of these. Compression occurs when the impactor pushes the sample inward, causing it to compress and deform.

Tension occurs when the impactor pulls the sample outward, causing it to elongate and potentially fracture. Bending occurs when the impactor applies a force to the sample at a specific point, causing it to bend and potentially fracture.

Shearing occurs when the impactor applies a force that causes the sample to slide or shear along a plane, potentially causing it to fracture. Torsion occurs when the impactor applies a twisting force to the sample, causing it to twist and potentially fracture.

The way that energy is transferred into the test sample during an impact event can have a significant impact on the material's behavior and response to the impact.

For example, materials that are more ductile may be able to absorb more energy during compression, while materials that are more brittle may be more likely to fracture during tension or bending. Understanding how energy is transferred into the sample during an impact event is important for selecting appropriate testing methods and interpreting test results.
For similar question on Energy transferred

https://brainly.com/question/29946441

#SPJ11

Students perform an investigation using density to determine what kind of wood an oval-shaped block is made of.
One student attaches a lead cube to an oval-shaped piece of wood and submerges them in water, as shown in the
diagram. The lead cube keeps the wood from floating. When the wood is underwater, the water level reads 47
milliliters.

Answers

A student ties a lead cube to an oval-shaped block to prevent it from floating and immerses it in water density as part of a study to identify the sort of wood it is composed of.

What is the name of density?

The term "density" (also known as "volumetric mass density" or "specific mass") refers to a substance's mass per unit of volume. Although the Latin letter D may also be used, the sign most frequently used for density is (the lower case Greek letter rho).

Who discovered density?

According to legend, Archimedes shouted "Eureka!" as he rushed through the Sicilian streets. ("I've discovered it!") He had figured out what density was. Everyone has spent a significant amount of time in water during their life. The second thing Archimedes noticed was that he felt lighter floating.

To know more about density visit:

https://brainly.com/question/15164682

#SPJ1

How many degree days are accumulated in a seven day period when the average outside temperature is 30 oF? (2 Points)
A) 245
B) 149
C) 35
D) 6000

Answers

245-degree days are accumulated in a seven-day period when the average outside temperature is 30 oF.

To calculate degree days, we need to find the difference between the average outside temperature and the base temperature (usually 65 oF) for each day, and then add up those differences for the period in question.
In this case, let's assume the base temperature is 65 oF. So, for each day, we need to find the difference between 30 oF and 65 oF, which is 35 oF. Then, we add up those differences for the seven-day period:
35 + 35 + 35 + 35 + 35 + 35 + 35 = 245
Therefore, the answer is A) 245.

To learn more about temperature, refer:-

https://brainly.com/question/1191204

#SPJ11

245-degree days are accumulated in a seven-day period when the average outside temperature is 30 oF.

To calculate degree days, we first need to determine the base temperature, which is the temperature below which a building needs to be heated.

This value varies depending on the location and building type. For example, a common base temperature for residential buildings in the United States is 65°F.

The degree days for a given day is calculated by subtracting the base temperature from the average temperature for that day.

If the average temperature is below the base temperature, the degree days for that day are considered zero.

For the given problem, the average outside temperature is 30°F. Assuming a base temperature of 65°F, we can calculate the degree days for each of the seven days:

Day 1: 65 - 30 = 35 degree days

Day 2: 65 - 30 = 35 degree days

Day 3: 65 - 30 = 35 degree days

Day 4: 65 - 30 = 35 degree days

Day 5: 65 - 30 = 35 degree days

Day 6: 65 - 30 = 35 degree days

Day 7: 65 - 30 = 35 degree days

To find the total degree days for the seven-day period, we add the degree days for each day:

35 + 35 + 35 + 35 + 35 + 35 + 35 = 245 degree days

Therefore, the answer is A) 245.

To know more about degree days :

https://brainly.com/question/18187676

#SPJ11

A diffraction grating has 45,000 slits/cm. What is the distance between adjacent slits?.

Answers

The distance between adjacent slits in this diffraction grating is approximately 2.22 × 10^-3 meters or 2.22 micrometers.

The distance between adjacent slits in a diffraction grating can be found using the formula:

d = 1/N

where d is the distance between adjacent slits and N is the number of slits per unit length. In this case, N = 45,000 slits/cm. Converting to slits/m, we have:

N = 45,000 slits/cm x (1 m/100 cm) = 450 slits/m

Substituting into the formula, we get:

d = 1/N = 1/450 slits/m ≈ 2.22 × 10^-3 m/slit

To know more about slits refer here

https://brainly.com/question/30547515#

#SPJ11

which technology can allow a single ground-based telescope to achieve images as sharp as those from the hubble space telescope? which technology can allow a single ground-based telescope to achieve images as sharp as those from the hubble space telescope? adaptive optics grazing incidence interferometry

Answers

The technology that can allow a single ground-based telescope to achieve images as sharp as those from the Hubble Space Telescope is adaptive optics.

Adaptive optics use deformable mirrors to correct for atmospheric distortion, which causes the "twinkling" of stars and blurs images. This technology allows ground-based telescopes to achieve resolutions as good as those of space-based telescopes like Hubble. Other technologies that can also improve ground-based telescope resolution include grazing incidence and interferometry.

Adaptive optics is the technology that allows a single ground-based telescope to achieve images as sharp as those from the Hubble Space Telescope. This technology compensates for the distortion caused by Earth's atmosphere, resulting in clearer and sharper images.

An adaptive optics system's brain is a deformable mirror, which may change shape hundreds or thousands of times per second to instantly correct aberrations caused by atmospheric turbulence.

Since the primary mirrors of ground-based telescopes are frequently enormous and cannot be moved rapidly (even segmented mirrors are massive), the deformable mirror is a separate component placed after the light has already been reflected from the primary mirror.

Learn more about adaptive optics here

https://brainly.com/question/29751399

#SPJ11

Question 70 Marks: 1 To produce thermal effects, microwave energy is converted to ______ in the body or organism.Choose one answer. a. chemical energy b. mechanical energy c. power d. heat

Answers

To produce thermal effects, microwave energy is converted to heat in the body or organism.

The answer is d. heat.

Microwave energy, like all forms of electromagnetic radiation, can interact with matter and be absorbed, which can result in the production of heat. In the context of the human body, this heat can cause thermal effects such as tissue damage or changes in cellular metabolism.

When microwave energy is absorbed by matter, it can cause the molecules in that matter to vibrate and generate heat. This is because the energy of the microwaves is converted into kinetic energy of the molecules.

In the human body, certain tissues may absorb more microwave energy than others, depending on their composition and density. For example, the eyes and testes are particularly sensitive to microwave radiation because they contain fluids that can absorb this energy.

To know more on microwave energy

https://brainly.com/question/6321433

#SPJ4

a mass hangs from the ceiling by a string. if the mass is doubled, by what factor does the travel time for a wave pulse traveling from the mass to the ceiling and back decrease? type your answer here

Answers

When a mass hangs from the ceiling by a string and the mass is doubled, the travel time for a wave pulse traveling from the mass to the ceiling and back does not decrease by any factor.

The travel time for a wave pulse traveling from the mass to the ceiling and back depends on the length of the string and the gravitational force acting on the mass. If the mass is doubled, the gravitational force acting on it will also double. This will cause the string to stretch and become slightly longer, resulting in a longer travel time for the wave pulse. Therefore, the travel time will not decrease by any factor, but will actually increase slightly due to the increased gravitational force and stretching of the string.


When a mass hangs from the ceiling by a string and the mass is doubled, the travel time for a wave pulse traveling from the mass to the ceiling and back does not decrease by any factor. This is because the wave speed on the string depends only on the tension in the string and its linear mass density, and not on the mass of the object hanging from it. Therefore, doubling the mass does not affect the travel time of the wave pulse.

Visit here to learn more about gravitational force  : https://brainly.com/question/12528243
#SPJ11

4. A coil rotates at 60 revolutions per second in a field of 2.0*10^-2 T. If the coil has a cross sectional area of 20. cm2, and has 1000 turns, what is the amplitude in V of the emf of the coil.

Answers

The emf amplitude of the rotating coil with 60 Hz frequency, 1000 turns, 20 cm2 area, and 2.0*10^-2 T field is 24 V.


The magnetic flux through the coil can be calculated as the product of the magnetic field, the cross-sectional area of the coil, and the number of turns in the coil:

Φ = B * A * N

where Φ is the magnetic flux, B is the magnetic field, A is the cross-sectional area, and N is the number of turns in the coil.

In this problem, we are given that the coil rotates at 60 revolutions per second in a field of 2.0*10^-2 T. This means that the magnetic flux through the coil changes at a rate of:

dΦ/dt = B * A * N * dθ/dt

where dθ/dt is the angular velocity of the coil in radians per second. Since the coil rotates at 60 revolutions per second, we can convert this to radians per second by multiplying by 2π:

dθ/dt = 60 * 2π = 376.99 rad/s

Substituting the given values, we get:

dΦ/dt = (2.0*10^-2 T) * (20 cm^2) * (1000 turns) * (376.99 rad/s) = 301.6 V/s

The emf induced in the coil is equal to the rate of change of magnetic flux, so:

emf = -dΦ/dt = -301.6 V/s

The negative sign indicates that the direction of the induced emf is opposite to the direction of the change in magnetic flux. Through a process known as electromagnetic induction, a rotating coil may produce an electrical current. This is due to the fact that a conductor, like a coil, undergoes a change in magnetic flux when it travels through a magnetic field. A current may start to flow as a result of the electromotive force (EMF) that this change in flux creates in the conductor.


Therefore, the amplitude of the emf of the coil is 301.6 volts.

Learn more about coil here:

https://brainly.com/question/15021267

#SPJ11

Radiation of a given wavelength causes electrons to be emitted from the surface of metal 1 but not from the surface of metal 2. Why could this be?

Answers

The phenomenon described is known as the photoelectric effect. It takes place whilst a beam of mild (radiation) of a certain frequency or energy (wavelength) strikes a metal surface and causes electrons to be emitted from it.

The photoelectric effect is a phenomenon wherein electrons are emitted from a fabric whilst it's far uncovered to electromagnetic radiation, along with light. This effect was first determined by using Heinrich Hertz in 1887 and changed into later defined via Albert Einstein in 1905, for which he become presented the Nobel Prize in Physics in 1921.

According to Einstein's clarification, mild consists of particles known as photons, which bring energy. whilst a photon strikes an atom in the cloth, it transfers its power to an electron, that could then be emitted from the material if the strength of the photon is extra than the binding power of the electron to the material. The emitted electrons are referred to as photoelectrons.

To learn more about Photoelectric effect visit here:

brainly.com/question/26465043

#SPJ4

Question 16
The amount of radiation damage in human exposure to ionizing radiation is measured in term of:
a. Grays (Gy)
b. Relative biological effectiveness (RBEs)
c. Rads
d. sieverts

Answers

The amount of radiation damage in human exposure to ionizing radiation is measured in terms of sieverts (Sv). Option d is correct.

Sieverts are the internationally recognized units for measuring the health effects of ionizing radiation on the human body. The sievert takes into account the type of radiation, the dose of radiation, and the sensitivity of the affected tissue or organ.

The other options listed (grays, relative biological effectiveness, and rads) are also used to measure radiation, but they are more commonly used to describe the amount of radiation absorbed or the biological effectiveness of a specific type of radiation. The sievert is the preferred unit for radiation exposure measurement and is used to establish exposure limits and guidelines for radiation protection. Option d is correct.

To know more about radiation, here

brainly.com/question/13934832

#SPJ4

37) Which constellation lies in the direction toward the galactic center? A) Orion B) the Big Dipper C) Leo D) Sagittarius E) Taurus

Answers

The constellation that lies in the direction toward the galactic centre is D) Sagittarius.

The centre of our Milky Way galaxy is located in the direction of the constellation Sagittarius, which is located in the southern sky. Sagittarius is a prominent constellation that is easily visible from the southern hemisphere, and it is also visible from many northern hemisphere locations during the summer months. The area around Sagittarius is rich in interstellar dust and gas, which can obscure our view of the galactic centre in visible light. Nonetheless, astronomers use a variety of techniques, including infrared and radio observations, to study the structure and properties of the galactic centre region.

To learn more about Milky Way, refer:-

https://brainly.com/question/30714548

#SPJ11

You are standing on a bridge above the railroad tracks of the French High Speed Train (TGV). The train is approaching you with a constant speed of 81.0 m/s. (81.0 m/s = 291.6 km/h = 182.0 mi/h.) The train gives a 7.20 s long horn signal. How long does the signal last for you? The train reaches you only after it is finished emitting the horn signal. For the speed of sound use 334.0 m/s.

Answers

The time it takes for the sound to travel from the train to the observer on the bridge is given by:

distance = speed × time

The distance is the same as the distance the train travels during the duration of the horn signal, which is:

distance = speed × time = 81.0 m/s × 7.20 s = 583.2 m

The time it takes for the sound to travel this distance is:

time = distance / speed of sound = 583.2 m / 334.0 m/s = 1.744 s

Therefore, the horn signal lasts for 1.744 seconds for the observer on the bridge.

an object is traveling on a level surface at 30 mph when the surface becomes a ramp with an angle of 30 degrees with the horizontal. the object goes up the ramp. how long (in seconds) does the object to come to rest?

Answers

It takes approximately 2.734 seconds for the object to come to rest as it travels up the ramp if speed at surface level is 30km/h.

we'll first need to determine the component of acceleration acting against the object's motion as it travels up the ramp.

Then, we'll use that information to calculate the time it takes for the object to come to rest.

Step 1: Calculate the acceleration due to gravity acting parallel to the rampThe acceleration due to gravity (g) is 9.81 m/s^2. To find the component of gravity acting along the ramp, we'll use the formula:a_parallel = g * sin(angle)where angle is 30 degrees. First, convert 30 degrees to radians:angle (in radians) = (30 * π) / 180 ≈ 0.524 radians

Now, find the parallel acceleration:

a(parallel) = 9.81 * sin(0.524) ≈ 4.905 m/s^2

Step 2: Convert the object's initial speed to meters per secondThe object is initially traveling at 30 mph.

To convert this to meters per second (m/s), use the conversion factor 1 mph ≈ 0.44704 m/s:

initial speed (in m/s) = 30 * 0.44704 ≈ 13.411 m/s

Step 3: Calculate the time it takes for the object to come to rest

Now we'll use the formula:

final speed = initial speed + (acceleration * time)Since the object comes to rest, its final speed is 0 m/s. We can now solve for time:0 = 13.411 - (4.905 * time)time ≈ 2.734 seconds

So, it takes approximately 2.734 seconds for the object to come to rest as it travels up the ramp.

To know more about acceleration Visit:

https://brainly.com/question/12550364

#SPJ11

A 1250 kg car is moving down the highway with a velocity of 32.0 m/s when it bumps into the car ahead of it which has a mass of 875 kg and a velocity of 25.0 m/s. After the collision, the two cars stick together. What will be the resulting velocity of the two cars together?

Answers

A. If the collision is perfectly inelastic then it follows the equation,

   

            m1v1 + m2v2 = (m1 + m2)(v3)

Substituting,

          (1250 kg)(32 m/s) + (875 kg)(25 m/s) = (1250 kg + 875 kg)(v3)

The value of v3 from the equation is 29.12 m/s.

B. The kinetic energy is calculated through the equation,

             KE = 0.5mv²

Using this equation to solve for the total kinetic energies before and after the collision,

   Before collision:

        KE = 0.5(1250 kg)(32 m/s)² + (0.5)(875 kg)(25 m/s)²

            KE = 913437.5 J

   After collision:

          KE = (0.5)(1250 kg + 875 kg)(29.12 m/s)²

                KE = 900972.8 J

The difference is equal to 12464.7 J

Based on what you have learned about self-esteem, reflect on your own sense of self-esteem. In the space below, explore and discuss the things that impact your self-esteem and ways you use to maintain high or positive self-esteem.

Answers

Self-esteem is based on the opinions and beliefs of the individuals. This helps us to value or perceive ourselves. It defines your self-worth and how you treat yourself.

Self-esteem refers to the positive (high self-esteem) and negative (low self-esteem) feelings that we have ourselves. High self-esteem or positive self-esteem is defined as self-love,self-value, self-respect, and dignity.

Positive self-esteem means believing in your own capability to do things on your own. When there is a lack of self-confidence, self-love leads to negative self-esteem.

To know more about self-esteem:

https://brainly.com/question/31422306

#SPJ1

Charge density of a wire is 5μC/m. Find the electric field intensity 10 cm far from the wire If the length of the wire is 2 m. find the total flux. If you put an electron 10 cm far from the wire, find the electric force acting on it​

Answers

The electric field intensity 10 cm away from the wire is 22.5 kV/m. The total flux through a closed surface around the wire is 0.45 Nm²/C. The electric force acting on an electron 10 cm away from the wire is 2.97 x 10⁻¹⁷ N.

The electric field intensity at a distance r from an infinitely long wire with charge density λ is given by the formula E = λ/ (2πε₀r), where ε₀ is the electric constant (8.85 x 10⁻¹² Nm²/C²). Substituting the given values, we get

E = (5 x 10⁻⁶ C/m) / (2π x 8.85 x 10⁻¹² Nm²/C² x 0.1 m)

   = 22.5 kV/m.

The total flux through a closed surface around the wire is given by the formula Φ = q/ε₀, where q is the total charge enclosed by the surface. In this case, the charge enclosed by a cylindrical surface with radius 0.1 m and length 2 m is q = λ x length = (5 x 10⁻⁶ C/m) x 2 m = 1 x 10⁻⁵ C. Substituting this value and ε₀ into the formula, we get

Φ = (1 x 10⁻⁵C) / (8.85 x 10⁻¹² Nm²/C²)

   = 0.45 Nm²/C.

The electric force acting on an electron placed 10 cm away from the wire is given by the formula F = qE, where q is the charge of the electron (-1.6 x 10⁻¹⁹ C) and E is the electric field intensity at that point. Substituting the given values, we get F = (-1.6 x 10⁻¹⁹ C) x (22.5 x 10³ V/m) = 2.97 x 10⁻¹⁷ N. Since the electron has a negative charge, the force is attractive and directed towards the wire.

To know more about the Density, here

https://brainly.com/question/14474852

#SPJ1

if the magnetic field of an electromagnetic wave is in the x-direction and the electric field of the wave is in the y-direction, the wave is traveling in thegroup of answer choicesxy-plane. z-direction.-x-direction.-y-direction.-z-direction.

Answers

The magnetic field of an electromagnetic wave is in the x-direction and the electric field is in the y-direction, the wave is traveling in the z-direction.

The wave is traveling in the xy-plane, as the magnetic field is in the x-direction and the electric field is in the y-direction, indicating that the wave is polarized in the xy-plane. Electromagnetic waves are transverse waves, meaning that the oscillations of the electric and magnetic fields are perpendicular to the direction of wave propagation.

The waves that may go through vacuum space are electromagnetic waves. Magnetic and electrical components are present in electromagnetic waves. All of them move at the speed of light. The atoms of the material absorb and reemit wave energy as part of the energy transport process through a medium.

Learn more about Electromagnetic waves here

https://brainly.com/question/3101711

#SPJ11

(368-12(2)) In general, the voltage limitation between conductors in a surface metal raceway shall not exceed _____ volts unless the metal has a thickness listed for higher voltage.

Answers

In general, the voltage limitation between conductors in a surface metal raceway shall not exceed 600 volts unless the metal has a thickness listed for higher voltage.
In general, the voltage limitation between conductors in a surface metal raceway shall not exceed _____ volts unless the metal has a thickness listed for higher voltage.

The voltage limitation between conductors in a surface metal raceway shall not exceed 600 volts unless the metal has a thickness listed for higher voltage.

Learn more about voltage limitation here;

https://brainly.com/question/23777621

#SPJ11

a voltage output occurs at the secondary only at the instant a switch the primary circuit is opened or closed

Answers

It's important to note that the voltage output at the secondary of a transformer is not necessarily limited to the instant when the switch in the primary circuit is opened or closed. Once the magnetic flux in the core of the transformer has changed, it will continue to induce an EMF in the secondary coil as long as the flux is changing.

This is why transformers are commonly used to step up or step-down voltages in AC power systems.

When a switch in the primary circuit of a transformer is opened or closed, it causes a change in the magnetic flux in the core of the transformer. This change in magnetic flux induces an electromotive force (EMF) in the secondary coil, which produces a voltage output at the secondary.

To know more about voltage output:

https://brainly.com/question/17188217

#SPJ4

What type of transformer is being described when a voltage output occurs at the secondary only at the instant a switch in the primary circuit is opened or closed?

a particular light bulb filament emits 55.8 watts of blackbody (thermal) radiation when it is held at a temperature of 2,231 degrees celsius. how much power will it radiate if the temperature is raised to 3,073 degrees c? give your answer in watts with an accuracy of 1 w. you answered

Answers

At a temperature of 2,231 degrees Celsius, the light bulb filament emits 55.8 watts of blackbody radiation.

Using the Stefan-Boltzmann law, we can determine the power emitted at 3,073 degrees Celsius:

P = σA(T^4)

Where P is the power emitted, σ is the Stefan-Boltzmann constant (5.67 x 10^-8 W/m^2*K^4), A is the surface area of the filament, and T is the absolute temperature.

Assuming the surface area of the filament remains constant, we can set up a proportion:

(P1)/(T1^4) = (P2)/(T2^4)

Substituting in the values we know:

(55.8)/(2504^4) = (P2)/(3346^4)

Solving for P2:

P2 = (55.8 x 3346^4)/(2504^4) = 214.4 watts

Therefore, if the temperature is raised to 3,073 degrees Celsius, the light bulb filament will radiate approximately 214.4 watts of blackbody radiation.
To solve this problem, we'll use the Stefan-Boltzmann Law, which states that the power radiated by a blackbody (like a light bulb filament) is proportional to the fourth power of its temperature in Kelvin. Here are the steps to find the power at the new temperature:

1. Convert the initial and final temperatures from Celsius to Kelvin:
  T1 = 2,231°C + 273.15 = 2,504.15 K
  T2 = 3,073°C + 273.15 = 3,346.15 K

2. Find the ratio of the temperatures raised to the fourth power:
  (T2/T1)^4 = (3,346.15/2,504.15)^4 ≈ 3.787

3. Multiply the initial power by the temperature ratio to find the new power:
  P2 = P1 * (T2/T1)^4
  P2 = 55.8 W * 3.787 ≈ 211.383 W

4. Round the answer to the nearest watt:
  P2 ≈ 211 W

So, the light bulb filament will radiate approximately 211 watts when its temperature is raised to 3,073 degrees Celsius.

Learn more about the absolute temperature here:- brainly.in/question/26162043.

#SPJ11

High pressure jets of water applied to filter media during a backwash operation are a form of

Answers

High pressure jets of water applied to filter media during a backwash operation are a form of cleaning and maintenance, designed to remove accumulated particles and debris from the filtration system.

High pressure jets of water applied to filter media during a backwash operation are a form of content loaded backwash operation. This process helps to remove debris and particles that may have accumulated on the filter media, allowing for improved filtration efficiency.

The force of the water helps to dislodge and flush out the trapped particles, leaving the filter media clean and ready for use. A backwash operation uses high pressure water jets applied to filter media as a method of cleaning and maintenance to remove collected particles and debris from the filtering system.

To know more about backwash operation click here:

https://brainly.com/question/30650612

#SPJ11

Question 3 Marks: 1 After a landfill site is closed, it should be covered with at least ______ of compacted soil having a low permeability, graded to shed rainwater, melting snow, and surface water.Choose one answer. a. 5 feet b. 3 feet c. 2 feet d. 6 feet

Answers

After a landfill site is closed, it should be covered with at least 2 feet of compacted soil having a low permeability, graded to shed rainwater, melting snow, and surface water. So, the correct answer is c. 2 feet.

This cover is intended to minimize the infiltration of water into the landfill and prevent the release of contaminants into the surrounding environment. The compacted soil used as a cover is typically selected for its low permeability, which helps to reduce the amount of water that can penetrate through the cover and come into contact with the waste materials in the landfill. This helps to prevent leachate, which is the liquid that is generated from the decomposition of waste, from seeping out of the landfill and contaminating nearby soil and groundwater.

Learn more about landfill here:

https://brainly.com/question/9085477

#SPJ11

An 80 kg fisherman jumps from a dock into a 100 kg rowboat which is not moving. If the velocity of the fisherman is 4 m/s when he jumps into the boat, what is the final velocity of the fisherman and the boat?

Answers

Answer:

1.78 m/s

Explanation:

We again have to use the inelastic collision formula, which is m1*v1 + m2*v2 = (m1+m2)*vf. The question gives us m1 = 80kg, v1 = 4 m/s, and m2 = 100kg. Plugging this into the equation gets us: 80 * 4 = (80 + 100) * vf. Solving for vf, we get: vf = 320/180 = 1.78 m/s.

Answer:

v = 1.78 m/s

Explanation:

Momentum of the fisherman before = mass of the fisherman x velocity of the fisherman

= 80 kg x 4 m/s

= 320 kg·m/s

Momentum of the boat before = mass of the boat x velocity of the boat

= 100 kg x 0 m/s

= 0 kg·m/s

Total momentum before = Momentum of the fisherman before + Momentum of the boat before

= 320 kg·m/s + 0 kg·m/s

= 320 kg·m/s

Total mass after = mass of the fisherman + mass of the boat

= 80 kg + 100 kg

= 180 kg

Total momentum before = Total momentum after

320 kg·m/s = 180 kg x v

v = 320 kg·m/s / 180 kg

v = 1.78 m/s

Other Questions
Most common spermicide? How long do spermicides last/how long should they remain?Mnemonic 1. Complete the table and determine the rule for this transformation. A large Ferris wheel has a diameter of 90 meters and the top of the wheel is 102 meters above the ground. The Ferris wheel has 36 passenger capsules spaced evenly along the wheel. The diagram below shows 10 of the Ferris wheel capsules arranged such that the center of the wheel is at point C, the capsule at point M is at the same height as the center of the wheel, and the capsule at point T is at the very top of the wheel. Question 35 Marks: 1 Bat-proofing should be done in the ______, when bats are hibernating in caves.Choose one answer. a. late autumn through winter b. midautumn through spring c. early spring only d. midsummer through early autumn The work-leisure model suggests that whenever there is a rise in the wage rate and the income effect is greater than the substitution effect that the labourer will Select one: a choose less income b. Doug is currently not employed. He places a value of $16 an hour on his time in nonmarket activities. If Doug is offered a job paying $12 an hour,A) he should supply 0 hours in the labor market.B) he should supply a positive number of hours in the labor market and allocate no time to nonmarket activities.C) he is indifferent between supplying hours to the labor market and using his time in nonmarket activities.D) he should supply a positive number of hours in the labor market and to nonmarket activities. What is an example of a drug that was once legal in the United States, but now is not? Now that you have an equation for the line of best fit of this first order reactant, use it to determine the rate constant (including units) for this reaction.The y-intercept would be ln(Pch3nc)0 5750 - Choose the correct statement regarding wake turbulence:- Vortex generation begins with the initiation of the takeoff roll- The primary hazard is loss of control because of induced roll- The greatest vortex strength is produced when the generating airplane is heavy, clean, and fast Question 63 Marks: 1 The limitation of the lift capability of the centrifugal pump is based onChoose one answer. a. the weight of the atmosphere b. the design of the impeller and volute c. the efficiency of the motor d. the effect of friction a company uses the average cost retail method to estimate inventories. data for the first six months of 2024 include: beginning inventory at cost and retail were $59,000 and $104,000, net purchases at cost and retail were $789,000 and $1,304,000, and sales during the first six months totaled $804,000. the estimated inventory at june 30, 2024, would be: According to Descartes, if we can clearly and distinctly grasp the idea of God, then we may understand the existence of God. T or F. A defining characteristic of one of the various forms of organization is that it allows other corporations to hold stock in the company. This type of organization is known as a _____.Multiple Choicesole proprietorshipSubchapter C Corporationlimited liability companySubchapter S Corporation Discuss any three of the precepts which Equality adopts as his guide to life? Do you see any similarity between them and the thoughts of the transcendentalists? Explain fully. Interpret1. A metaphor is a figure of speech that makes a comparisonby saying that one thing is something else. Find themetaphor used to describe Charon in lines 5-9 of The Aeneidof Virgil. What impression of Charon does this metaphorcreate? If you encounter a liquid chlorine leak in a one-ton container. What action should you take first, to reduce the severity of the leak?a. Apply a caustic solutionb. Spray the container with waterc. Spray the container with an ammonia solutiond. Rotate the container to place the leak at the top QUICK QUICKQUICK QUICKQUICK QUICKQUICK QUICKPLEASE PELASE QUICK QUICKQUICK QUICKQUICK QUICKQUICK QUICKQUICK QUICKQUICK QUICK What question was being asked by those, like Roy Wilkins, who favored the civil-rights bill? What happens if the solvent in TLC is too polar? How much would a 60 pound block of gold be worth in dollars? $_________________________