an aqueous solution is known to contain ag , mg2 , and sr2 ions. which reagent should be used to selectively precipitate the ag ?

The atomic structure of the atoms would be ions with the positively charged ion having one extra electron and the negatively charged ion having one fewer electron.

Both atoms have 6 protons each. The first atom has a positive charge while the second atom has a negative charge.

In other words, the first atom has lost an electron in order to have a positive charge. Similarly, the second atom has gained an electron in order to have a negative charge.

This means that the atom with a positive charge originally has one extra electron while the one with a negative charge originally has one fewer electron.

For the two atoms, the protons and neutrons are located in the nucleus while the electrons are found outside the nucleus around the orbitals.

More on the atomic structure can be found here: https://brainly.com/question/14156701

#SPJ1

Alcohol is a teratogen from the given options, which is responsible for fetal harm. The correct option to this question is C.

A well-known teratogen, alcohol intake during pregnancy can have negative consequences on the developing fetus.

Alcohol is a proven carcinogen that kills cells in a growing fetus and a teratogen that changes the cell cycle and function in a fetus's brain, with PAE having rapid and long-lasting impacts on someone with FASDs.

Any substance that exposes a fetus to an abnormality while the mother is pregnant is considered a teratogen. Teratogens are typically identified following an increase in the prevalence of a specific birth abnormality. For instance, a medication called thalidomide was prescribed to alleviate morning sickness in the early 1960s.

For more information on teratogen kindly visit to

https://brainly.com/question/29376531

#SPJ4

Reactions involves a single compound producing two or more simpler substances. The decomposition reaction is the right response.

Multiple products are created from a single reactant in a decomposition process. When a chemical and oxygen are combined, the result is a combustion reaction that produces oxides of other elements as a byproduct (although nitrogen atoms react to make N 2).

Decomposition reactions occur when complex chemical entities split apart into smaller components. Decomposition reactions often demand energy input. For instance, the thermal breakdown of potassium chlorate (KClO3) is a typical technique used in laboratories to generate oxygen gas.

When one reactant disintegrates into two or more products, the reaction is said to be in decomposition. This can be modelled by the all-inclusive formula AB = A + B. The conversion of water to hydrogen and oxygen and the breakdown of hydrogen peroxide are two examples of decomposition reactions.

To learn more about decomposition reaction. Please visit the below link.

https://brainly.com/question/16987748

#SPJ4

Answer:

In this experiment, the variable is the substance that was placed in the water. The student performed the experiment with four different substances (sodium chloride, vegetable oil, sugar, and glycerin), and she measured the effect of each substance on the water. All other factors, such as the volume of the water and the time that she stirred each beaker, were kept constant. Therefore, the correct answer is option C: "the substances that were placed in the water."

The concentration of aluminum ions in the solution is 0.15 M.

To determine the concentration of aluminum ions in the solution, you need to know the formula for aluminum nitrate and the number of moles of aluminum nitrate that were added to the water. The formula for aluminum nitrate is Al(NO3)3. This means that for every molecule of aluminum nitrate, there is one molecule of aluminum ions (Al3+).

If the concentration of nitrate in the solution is 0.15 M, that means that 0.15 moles of aluminum nitrate were added to every liter of water. Since there is one mole of aluminum ions for every mole of aluminum nitrate, the concentration of aluminum ions in the solution is also 0.15 M.

Learn more about concentration, here https://brainly.com/question/10725862

#SPJ4

Answer:

Explanation:

To solve this problem, we need to use the equation Q = mcΔT, where Q is the heat transfer, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature.

First, we need to determine the mass of water in the pot. Let's assume that the pot has a volume of 1 liter, or 1000 mL. Water has a density of 1 g/mL, so the mass of the water is 1000 g.

Next, we need to determine the change in temperature of the water. We know that the heat transfer is 640 KJ, and the specific heat capacity of water is 4.184 J/g°C. So, the change in temperature of the water is 640,000 J / (4.184 J/g°C * 1000 g) = 152.3°C.

Now, we can use the equation Q = mcΔT to solve for the mass of propane needed. We know that Q = 640,000 J, m = 1000 g, c = 4.184 J/g°C, and ΔT = 152.3°C. Plugging these values into the equation, we get 640,000 J = (1000 g)(4.184 J/g°C)(152.3°C). Solving for the mass of propane, we get m = 640,000 J / (4.184 J/g°C * 152.3°C) = 30.8 g.

So, the amount of propane needed to transfer 640 KJ of heat into the pot of water is 30.8 g.

Answer:

approximately 22 grams of propane to transfer 640 KJ of heat into a pot of water.

Explanation:

To determine the mass of propane needed to transfer 640 KJ of heat into a pot of water, you can use the following equation:

mass (g) = (heat transfer (J) / molar enthalpy of combustion (J/mol)) x molar mass (g/mol)

First, you need to convert the heat transfer value from KJ to J. To do this, multiply the value in KJ by 1000: 640 KJ * 1000 J/KJ = 640000 J

Next, you need to convert the molar enthalpy of combustion value from KJ/mol to J/mol. To do this, multiply the value in KJ/mol by 1000: -2220 KJ/mol * 1000 J/KJ = -2220000 J/mol

Finally, you can plug these values into the equation above to calculate the mass of propane needed:

[tex]mass (g) = (640000 J / -2220000 J/mol) x 44 g/mol = 22 g[/tex]

So, you would need approximately 22 grams of propane to transfer 640 KJ of heat into a pot of water.

One atom must be much more electronegative than the other.

Electronegativity

Electronegativity is the propensity of an atom in a molecule to draw the shared pair of electrons toward itself.

Because it is merely a propensity, this attribute has no dimensions. It essentially represents the final consequence of atoms' propensities to attract electron pairs that form bonds in various elements. On several scales, we quantify electronegativity. Linus Pauling created the most widely used scale.

Factors Affecting Electronegativity

To know more about Electronegativity, Check out:

https://brainly.com/question/17762711

#SPJ4

At the end of glycolysis, one can find energy contained in chemical bonds of glucose in ATP, NADH and pyruvate molecules.

The cytoplasm of a cell is where glycolysis takes place. It has two phases, which are the energy-requiring phase and the energy-releasing phase. The initial molecule, glucose, is first rearranged and two phosphate groups, which come from ATP, are attached to it in the energy-requiring phase. The sugar fructose-1,6-biphosphate is made up of phosphate groups. This separates into sugars with three carbons.

Whereas, the three carbon-sugars are transformed into three-carbon molecules during the energy release phase. Here, one of the NADH and pyruvate molecules is present together with two ATP molecules. Thus, the energy held in the chemical bonds of glucose can be found in ATP, NADH, and pyruvate.

Read more about glycolysis on:

https://brainly.com/question/1966268

#SPJ4

The rest of the wood equivalent to 1.8 grams is converted into its gas form by the process of combustion.

Burning a sample of wood creates is process of combustion which changes the form of a compound into another form, in this case, a sample of wood with a mass of 3 grams, being burned in an open dish will cause a reaction between the fire and oxygen from the surroundings and will result in a gas creation called carbon dioxide, losing 1.8 grams of its mass, as well as an ash residue weighing 1.2 grams. To calculate the loss of mass due to wood conversion into its gas form of carbon dioxide, we calculate it with the following calculation:

3.0-1.2=1.8

Therefore the loss of mass due to combustion and the creation of carbon dioxide is 1.8 grams.

To learn more about combustion: https://brainly.com/question/11023425

#SPJ4

Explanation: help help help

The freezing point of the solution will be - 0.952 °C can be calculated by the molality of the solution.

Molality of the solution can be calculated as follows by :

Molality= Number of the moles of the solute / weight of the solvent in Kg

= 27.3 ×100/ 83.0 × 46.07

= 0.7m

Since the molar mass of the ethanol is 46.07g/mol

So by the formula,

The molal freezing point depression constant KF and the solute's molality, m, are used to calculate the freezing point depression, which is given by T = KFm. Rearranging results in the formula: mol solute = (m) x (kg solvent).

ΔTf​ = Kf  ×Molality

=1.86×0.7

= 0.952

Thus, freezing point = 0−0.952

                                 =−0.952

Hence the freezing point of the resulting solution is calculated .

To know more about freezing point, please refer:

https://brainly.com/question/24314907

#SPJ4

250 , C-14 atoms should be left, if the rock is 5730 years old. C-14 (radiocarbon) is radioactive and decays into n-14 with a half-life of 5730 years. assume a rock starts with 1000 atoms of C-14.

Radiation-emitting radiocarbon substances are referred to as radioactive . A radionuclide decays into a different atom known as a decay product. Until the atoms achieve a stable state and stop being radioactive, the radiocarbon continue to change into new decay products. C degrades through a process known as beta decay. One of the neutrons in the radiocarbon atom turns into a proton during this process, which results in the decay of a 14C atom into a 14N atom. By adding one more proton to the atom, this results in the formation of a nitrogen atom rather than a radiocarbon atom.

learn more about decay here:

https://brainly.com/question/9615302

#SPJ4

The Czochralski method is the process most commonly used to grow single-crystal ingots of silicon for semiconductor processing.

The Czochralski method, also known as the Czochralski process or Czochralski technique, is a method of crystal growth employed to obtain single crystals of semiconductors such as silicon, germanium, and gallium arsenide, metals such as palladium, silver, platinum, gold), salts and synthetic gemstones.

The most important application of this method may be the growth of large cylindrical ingots, or boules, of single-crystal silicon used in the electronics industry to make semiconductor devices like integrated circuits.

Czochralski's method is not limited to the production of metal or metalloid crystals. It is also employed in the production of very high-purity crystals of salts, also used in particle physics experiments, with tight controls on confounding metal ions and water absorbed during production.

To learn more about Czochralski's method; click here:

https://brainly.com/question/28814014

#SPJ4

Because there are more links between surfaces, increasing crosslinking and crystallinity enhance resistance. Since crosslinking uses covalent bonds, it is the more efficient of the two.

Crystallinity rises with crosslinking, improving resistance to swelling. Atoms or molecules of the solute seep into the regions between the polymer chains. As a result, amorphous regions are more likely than crystalline parts to experience this process. A polymer's resistance to swelling is improved by increasing crystallinity since there is more intermolecular interaction between chains. Due to the comparatively strong covalent crosslinks created by increased crosslinking, interchain displacement is more resistant, which reduces swelling.

learn more about crystallinity here:

https://brainly.com/question/14977689

#SPJ4

To solve such this we must know the concept of acid base reaction. Therefore, in below given ways salt can be formed easily. Salt is formed by reaction between acid and base.

Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction, acid base reaction.

In the following ways salts can be made using nonmetals, oxides and bases.

oxides of non metal + water [tex]\rightarrow[/tex] acid

acid +base [tex]\rightarrow[/tex] salt

Therefore, in above given ways salt can be formed easily.

Learn more about the chemical reactions, here:

https://brainly.com/question/3461108

#SPJ1

The percentage of O2 will react is 0.97%.

The rate of reaction at equilibrium is determined by the equilibrium constant (Kc) value; that is, the higher the Kc value, the more products are formed. Kc is calculated by taking the ratio of product and reactant concentrations at equilibrium.

The chemical equation is N2 (g)+O2 (g)⇋2NO (g)

The reaction's equilibrium constant is Kc = 4.10104.

The solution contains 0.867 mol of N2 and 0.867 mol of O2.

The container has a volume of V=0.769L.

The initial concentration of

N2 = 0.967/0.769 M = 1.13 M

O2 = 0.867/0.769 M = 1.3 M

For the table, refer image

Now we write this same reaction's equilibrium constant expression.

[tex]K_{c} = \frac{[NO]^{2} }{[N_{2} ] . [O_{2} ]} \\\\4.10 * 10^{-4} = \frac{(2y)^{2}}{(1.13 - y) . (1.13 - y)} \\\\1.277 - 2.26y + y^{2} = 9756y^{2} \\\\9755y^{2} + 2.26y - 1.277 = 0\\[/tex]

     y = 0.011 M

So,

Now we know that the amount of O2 reacting is y = 0.011 M

and the percentage is 0.011/1.13 * 100%

                                                      = 0.97%

To know more about the Equilibrium constant, here

https://brainly.com/question/19671384

#SPJ4

Answer:

11.67 lbs

Explanation:

Answer:

B. Nucleotide

Explanation:

It combines and can form nucleic acids

Answer:

your answer would be b

Explanation:

DNA and RNA are made up of monomers known as nucleotides. The nucleotides combine with each other to form a nucleic acid, DNA or RNA. Each nucleotide is made up of three components: a nitrogenous base, a pentose (five-carbon) sugar, and a phosphate group

Therefore, the order of the reaction with respect to NO is 1, the order of the reaction with respect to [tex]O_3[/tex]  is 1, and the total order of the reaction is 2.

[tex]NO + O_3 - > NO_2 + O_2[/tex]  ,rate=k[NO][[tex]O_3[/tex]]

The rate of the reaction is given as  rate=k[NO][[tex]O_3[/tex]] , where k is the rate constant and [NO] and [[tex]O_3[/tex]]  represent the concentrations of NO and [tex]O_3[/tex], respectively.

The order of the reaction with respect to each element is determined by the power to which the concentration of that element appears in the rate expression. In this case, the concentration of NO appears to the first power and the concentration of  appears to the first power, so the order of the reaction with respect to NO is 1 and the order of the reaction with respect to [tex]O_3[/tex] is 1.

The total order of the reaction is the sum of the orders of the reaction with respect to each element. In this case, the total order of the reaction is 1 + 1 = 2.

Therefore, the order of the reaction with respect to NO is 1, the order of the reaction with respect to [tex]O_3[/tex]  is 1, and the total order of the reaction is 2.

To know more about order of reaction click on below link:

https://brainly.com/question/1769080#

#SPJ

Complete question:

Consider the following reaction:

[tex]NO + O_3 - > NO_2 + O_2[/tex]  ,rate=k[NO][[tex]O_3[/tex]]

what is order of reaction with respect to each element and total order of reaction?

The name given to the model of the atom that repres the atom as a nucleus surrounded by electron cloud is Bohr's model of atom.

According to the Bohr's model item the positive charge of the atom is present in a small concentrated part called nucleus which is surrounded by the electrons.

According to Neil Bohr, the electrons revolve around the nucleus in a stationary circular orbit which do not changes the energy of the electron which describes the stability of the atom.

The stationery level of orbits was represented by the letters K, L, M, N,... respectively. This model of atom was applicable to the one electrons species like the Alpha particles and the hydrogen atoms.

To know more about atom, visit,

https://brainly.com/question/17545314

#SPJ4

True, This occurs because as nuclear charge increases, losing electrons from an atom becomes more challenging.

The atom radius of an atom is the distance between its nucleus's centre and its outermost shell. As we transition from one era to another, the atomic size of a group grows as a result of the addition of shells. Over time, the number of shells stays constant as the nuclear charge rises, but the atomic size shrinks. As a result, electrons in the outermost shell are drawn toward the nucleus, causing the size to decrease.

Learn more about atom here

https://brainly.com/question/13654549

#SPJ4

At the corrosion, these electrons are depleted. When the cathode region is larger and the anode is smaller, all of the liberated electrons at the anode are soon used up.

This approach accelerates corrosion by causing the anodic reaction to happen at its quickest rate feasible. A metal's susceptibility to corrosion is determined by the metal itself. Corrosion is more likely to occur in metals with lower reduction potential than in metals with higher reduction potential. If the pH is 3 or lower, considerable corrosion happens in the absence of air due to the continual evolution of H2 at the cathode. • However, metals like Al, Zn, and others quickly corrode in excessively alkaline environments. if the metal's anodic area is smaller.

Learn more about corrosion here

https://brainly.com/question/489228

#SPJ4

Electronic Spectroscopy relies on the quantized nature of energy states, then there will be no intensity and no peak on the spectrum.

Electronic Spectroscopy

By measuring the kinetic energies of the electrons that are emitted when a chemical species is exposed to X-ray or ultraviolet radiation, a technique known as electron spectroscopy can be used to determine the energy with which electrons are bonded in chemical species. Because variations in atom configurations alter the amount of energy needed to release electrons, the data can be used to determine the structure's specifics.

Because Auger electrons and photoelectrons have relatively low energy, typically 20–2000 eV, chemical information can only be gleaned from the sample's topmost atomic layers (depth 10 nm or less).

To know more about Electron Spectroscopy, Check out:

https://brainly.com/question/24230107

#SPJ4

The number of atoms of v are preset in each unit cell is 2.

This unit cell uses nine  atoms, eight of which are corner atoms forming the  cell and one  further in the center of the  cell. The corners contribute only one net  atom and the center atom contributes another for a aggregate of two  atoms.

In a BCC ( body centered cubic) unit cell, there's one atom fully contained within the unit cell at the chassis  point in the center, and the chassis  spots at each of the eight corners are also  enthralled, but each of those is participated between eight neighboring unit cells.

So the total number of  atoms for each unit cell is

= > 18/8

= > 2

To learn more about BCC:

https://brainly.com/question/14953452

#SPJ4

The mixture of Ca(NO₃)₂ in water will show ion dipole forces.

An Ion dipole force is observed in a mixture where and ionic compound is made to be dissolved into a polar solvent.

CH₃OH is a non ionic compound and water is a polar solvent. So, when we dissolve it in water it will not show the ion-dipole forces.

On the other hand Ca(NO₃)₂ is a strong electrolyte.

Because of it's strong electrolytic property it dissolves into ions when it is mixed with water and because water is already a polar solution it give rise to the existence of the iron dipole forces.

To know more about Ion dipole forces, visit,

https://brainly.com/question/9279925

#SPJ4

Answer:

1.8 moles per liter of solution per second.

Explanation:

The rate at which carbon dioxide is being formed in this reaction can be calculated by using the balanced chemical equation for the combustion of propane:

[tex]C3H8 + 5 O2 - > 3 CO2 + 4 H2O[/tex]

From the balanced chemical equation, it is clear that for every mole of propane consumed, 3 moles of carbon dioxide are formed. Therefore, if the rate of consumption of propane is 0.6 mol/L s, the rate of formation of carbon dioxide is 3 * 0.6 = 1.8 mol/L s.

This means that the rate of formation of carbon dioxide is 1.8 moles per liter of solution per second.

Answer:

hope this helps!: Most volcanoes are found along a belt, called the “Ring of Fire” that encircles the Pacific Ocean. Some volcanoes, like those that form the Hawaiian Islands, occur in the interior of plates at areas called “hot spots.”

Explanation:

what I don't know?? lol!! hope u get a good grade and stuff :)

0.0305mol of carbon dioxide can be produced when 3.05 mole of calcium carbonate are heated.

Carbon dioxide is a chemically compound made up of molecules that each one have  one carbon atomclick covalently double bonded to two oxygen atoms. It is founded in the gas state at room temperature. In the air, carbon dioxide is to the  transparent to visible light of the  but absorbs infra-red by radiation, acting as the  greenhouse gas.

CaCO3 ---> CaO + CO2

Mass of CaCO3 mol = 40 + 12 + (16 x 3) = 100g/mol

Number of CaCO3 moles heated = 3.05/100 = 0.0305 mol

One CaCO3 mol produces 1 mol CO2

Therefore 0.0305mol  of CO2 produced.

To know more about carbon dioxide click-

https://brainly.com/question/25385913

#SPJ1

Answer: 29.4L

Explanation:

n = m/mm

36.8g/28g/mol = 1.31mol

At STP, the molar volume is equal to 22.4L/mol, therefore, the volume that will be occupied by 36.8g carbon monoxide is:

Multiply 22.4 and 1.31,

Answer = 29.4L

The concentration of the aluminum ion [Al3+] in the solution is 0.033M.

Solid Al(NO3) is added to distilled water to produce a solution in which the concentration of nitrate [NO3-] is 0.1 M. so the equation becomes,

Al(NO3)3 ----> Al3+ + NO3-

In chemical reaction, it leads to the chemical transformation of one set of chemical substances to another. In the reaction, the reactants are converted to one or more different substances that is called the products. Substances are either chemical elements or compounds. A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products.

1 mole of Al3+ = 3 mole of (NO3-)

let NO3- = 3y

then Al3+ becomes y.

[NO3-] = 0.10M

So it becomes, 3y = 0.10 M

                            y = 0.10 / 3

                              = 0.033M

To learn more about Chemical reaction please visit:

https://brainly.com/question/16416932

#SPJ4