Based on the number of particles involved and the enthalpy of the reaction, changes that would shift the equilibrium to the right would, according to Le Chatelier's principle, include increasing the volume of the system, reducing the pressure of the system, reducing the temperature of the system, increasing the concentration of ammonia and/or oxygen and reducing the concentration of NO and/or water. Changes in the opposite direction would cause the equilibrium to shift towards the reactants.
Upon increasing pressure or reducing volume, the equilibrium shifts in the direction that produces fewer gaseous particles. In this case, that's the reactants (9 molecules) and not the products (10 molecules). When considering temperature, it is useful to consider heat as one of the reaction components. When the enthalpy of the reaction is negative, heat is produced so it can be considered to be one of the products. Le Chatelier's principle states that upon changing one of the variables, the equilibrium will shift in the direction that counteracts the effects of the change. So, when reducing the temperature of the system, we are taking the heat out of the system, so equilibrium will shift to the products so that it can produce more heat, and vice versa. The same principle applies to the concentrations of ammonia, oxygen, water, and NO.
You can learn more about Le Chatelier's principle here:
brainly.com/question/2001993
#SPJ4
A glass container was initially charged with 1.90 moles of a gas sample at 4.00 atm and 21.7 °C. Some of the gas was released as the temperature was increased to 29.1 °C, so the final pressure in the container was reduced to 1.05 atm. How many moles of the gas sample are present at the end?
The no. of moles of the gas sample are present at the end is 0.486 moles
The ideal gas law is :
PV = nRT
here,
P is pressure = 4.00 atm
T is temperature = 21.7 °C = 294.7 K
n is moles = 1.90 moles
R is gas constant
V = n RT / P
= (1.90 × 0.082 × 294.7) / 4
= 11.47 L
Now when temperature is 302.1 K , pressure is 1.05 atm and volume is 11.47 L then the moles will be :
PV = n RT
n = PV / RT
= ( 1.05 × 11.47 ) /( 0.082 × 302.1 )
= 12.04 / 24.77
= 0.486 moles
Thus , A glass container was initially charged with 1.90 moles of a gas sample at 4.00 atm and 21.7 °C. some of the gas was released as the temperature was increased to 29.1 °C, so the final pressure in the container was reduced to 1.05 atm . the no. of moles of the gas sample are present at the end is 0.486 moles
To learn more about ideal gas law here
https://brainly.com/question/13821925
#SPJ1
a mixture contains n a h c o 3 together with unreactive components. a 1.62 g sample of the mixture reacts with h a to produce 0.561 g of c o 2 . the molar mass of n a h c o 3 is 84.01 g/mol and the molar mass of c o 2 is 44.01 g/mol . what is the percent by mass of n a h c o 3 in the original mixture?
The percent by mass of sodium bicarbonate in the sample mixture is 67%.
Sodium bicarbonate reacts with a monoprotic acid HA in the following manner:
[tex]NaHCO_{3} + HCl[/tex] → [tex]NaCl + H_{2}O+CO_{2}[/tex]
This means that 1 mole of sodium bicarbonate produces 1 mole of carbon dioxide. We can use this to set up a proportion:
84.01 g of sodium bicarbonate : 44.01 g of carbon dioxide = X : 0.561 g of carbon dioxde
X is equal to the mass of sodium bicarbonate in the sample.
X = 84.01 g * 0.561 g / 44.01 g = 1.08 g of sodium bicarbonate
The percent by mass is calculated using the following equation:
%w = 100% * mass of sodium bicarbonate / mass of mixture = 100% * 1.08 g / 1.62 g = 67%
You can learn more about percent by mass here:
brainly.com/question/14990953
#SPJ4
Our atmosphere's density and pressure do this as you go up in altitude from the ground: question 1 options: density and pressure both decrease density decreases, pressure increases density increases, pressure decreases density and pressure both increase density and pressure both increase until you get to the stratosphere
Both atmosphere density and atmospheric pressure decrease with the increase in altitude.
Atmosphere density decreases as we go up in altitude because the composition of the atmosphere changes in favor of lighter gases, lowering the overall density of the mixture.
On the other hand, with the increase in altitude, the height of the column of air above us decreases, and that air also becomes less dense, resulting in lower atmospheric pressure at higher altitudes. One interesting consequence of this is that, for example, the boiling point of water decreases, so that at the top of Mount Everest, water boils at 68 °C.
You can learn more about atmospheric pressure here:
brainly.com/question/28310375
#SPJ4
tertiary and secondary alcohols react with hx by forming a carbication intermediate. methyl and primary alcohols do not form these intermediates; they form alkyloxonium ions that react with the nucleophilic x–. the halide ion bonds to the primary or methyl carbon by eliminating a(n) molecule.
lysozyme, an enzyme found in human saliva, tears, and other secretions, catalyzes the hydrolysis of the beta-1,4-glycosidic linkages and peptidoglycan. This enzyme degrades the bacterial cell wall but it is suitable for human health by preventing bacterial infection.
What is hydrolysis?
The cleavage of biomolecules known as biological hydrolysis occurs when a water molecule is consumed in order to cause the division of a bigger molecule into its component parts. Saccharification is the process of hydrolyzing a carbohydrate into its individual sugar molecules, as occurs when sucrose is broken down into glucose and fructose.
The beta one for, say, acidic connections, an urgent analogy that will demolish the bacterial cell wall. By destroying their peptidoglycan, it breaks down the bacterial cell wall. In addition, since we lack peptidoglycan in our bodies, an enzyme that kills bacteria won't have the same impact on human cells. This is excellent for human health since it can help stop bacterial infections. Because it will presumably destroy microorganisms, we detect it in human secretions that come into contact with the environment, such as tears and saliva.
Hence . lysozyme degrades the bacterial cell wall but it is suitable for human health by preventing bacterial infection.
To learn more about Hydrolysis from the given link
https://brainly.com/question/8740481
#SPJ9
The hydrolysis of the beta-1,4-glycosidic bonds and peptidoglycan is catalyzed by the enzyme lysozyme, which is present in human saliva, tears, and other secretions. This enzyme breaks down the bacterial cell wall, but because it guards against bacterial infection, it is safe for human health.
Describing hydrolysis.
When a water molecule is consumed to split a larger molecule into its constituent parts, the process of cleaving biomolecules is known as biological hydrolysis. Hydrolyzing a carbohydrate into its constituent sugar molecules, as happens when sucrose is broken down into glucose and fructose, is the process known as saccharification.
The beta one, for example, would be for acidic connections, a critical comparison that would destroy the bacterial cell wall. It disintegrates the bacterial cell wall by dissolving their peptidoglycan. Additionally, an enzyme that kills bacteria won't have the same effect on human cells since we lack peptidoglycan in our body. Since it can aid in preventing bacterial infections, this is fantastic for human health. We find it in human fluids that come into contact with the environment, including tears and saliva, because it will likely kill bacteria.
Hence . Lysozyme breaks down bacterial cell walls, yet because it guards against bacterial infection, it's safe for human health.
To know more about carbication intermediate, click on the link below:
https://brainly.com/question/18503359
#SPJ9
the electron configuration for copper is 1 s 2 2 s 2 2 p 6 3 s 2 3 p 6 4 s 1 3 d 10 1s22s22p63s23p64s13d10. how many inner core electrons does copper contain?
Copper [Cu] has 28 inner core electrons
Copper is a group 11 element with atomic number 29. It has one valence electron
Valence electron is the electron in the outermost shell and it's the number of electron an atom lose or gain to become a noble gas
Cu has four electron shells with 2,8,18 and 1 electrons in each shell respectively
The outermost shell containing just one electron .
Apart from this shell, the rest of the shells contain 28 electrons and these are regarded as the inner core electrons
Read more
https://brainly.ph/question/1322859
#SPJ4
16. Give examples of at least three questions that we can use science to help answer.
Answer:
1.) Why is the sky blue?
2.) How far away from earth is the moon?
3.) How many different kinds of bacteria are on the main door handle at school?
Explanation:
Questions based on observations or on data from experiments are the ones that science can most likely help with.
A compound of bromine and fluorine is used to make uf6, which is an important chemical in processing and reprocessing of nuclear fuel. The compound contains 58. 37 mass percent bromine. Determine its empirical formula.
The empirical formula for the given compound is BrF₃.
It is given that,
% of Br = 58.37
then % of F = 100 - 58.37 = 41.63%
Let the mass of the compound be 100 g. So, the percentages given are taken as mass.
Mass of Br = 58.37 g
Mass of F = 41.63 g
To formulate the empirical formula,
No. of moles of Br = 58.37/79.90 = 0.73 moles
No. of moles of F = 41.63/19 = 2.19 moles.
For the mole ratio, we divide each value of the moles by the smallest number of moles calculated which is 0.73 moles.
For Bromine = 0.73/0.73 = 1
For Fluorine = 2.19/0.73 = 3
Now, taking the mole ratio as their subscripts.
The ratio of Br : F = 1 : 3
Hence, the empirical formula for the given compound is BrF₃.
To know more about empirical formula visit the link:
https://brainly.com/question/11588623?referrer=searchResults
#SPJ9
What is the mass of 5.32 x 10^25 atoms of sodium?
Answer:
2031 g or 2.03 kg
Explanation:
1 mole of Na = 22.990 g = 6.022 x 10^23 atoms
so the mass of 5.32 x 10^25 atoms of Na equals
(22.990)(5.32 x 10^25)/(6.022 x 10^23)
= 2030.99966788 g = 2031 g or 2.03 kg
which one of the following would form a precipitate with po₄³⁻ ions in aqueous solution? a) k⁺ b) nh₄⁺ c) ca²⁺ d) none of these would form a precipitate.
Which of the following factors can precipitate as po₄³⁻ ions in an aqueous solution: ca²⁺.
Precipitate: In chemistry, a stable substance occurs due to a chemical reaction that reduces the solubility of a solid or an exchange of reactions due to a change in temperature. In meteorology, precipitation is liquid or strong water falling from the sky (rain, snow, etc.). Fehling's solution is blue due to dissolved Cu2. When silver nitrate and sodium chloride are mixed with water, the silver chloride precipitates out of the solution as a heavy precipitate. In this situation, the precipitate is silver chloride.
A precipitate has a strong form in a chemical reaction that is unique to both reactants. This occurs when solutions containing ionic compounds combine to form insoluble products. Sediment identification can usually be addressed by reviewing solubility recommendations. The correct answer is a homogeneous aggregate of two or more materials. A precipitate is a stable substance that separates from the solution as in a chemical reaction.
Learn more about precipitate here:
https://brainly.com/question/1783904
#SPJ1
Describe the parts of an atom including location, charge, mass and what each part determines about the atom.
Answer:
1. Protons: located in the nucleus, positive charge, mass is 1 amu
2. Neutron: located in nucleus, neutral charge, mass is 1 amu
3. Electron: located in the 3 dimensional space around the nucleus, negative charge, nearly massless when compared to protons and neutrons
Explanation:
Write the molecular and empirical formulas of the following compound:
O-H
|
O-P-0-H
O-H
Answer:
the answer base on my test is H3O4P1
how does the process of conduction, convection, and radiation work when heat transfer is involved with melting of polar ice caps?
Convection is a type of heat transfer in which a fluid experiences an energy transition. Radiation refers to the process by which heat is transferred between objects without direct physical contact.
How do conduction convection and radiation work together?Through the process of conduction, heat is transferred directly from one object to another. Convection is a type of heat transfer in which a fluid experiences an energy transition. Radiation refers to the process by which heat is transferred between objects without direct physical contact.
Direct contact between the objects is how heat is transferred during conduction. The heat is transferred within the fluid during convection. Heat transfer in radiation happens through electromagnetic waves without the use of particles. The temperature difference causes heat transfer to occur.
Conduction describes the process by which heat is transferred between objects when they come into direct contact.Convection is a type of heat transfer in which a fluid experiences an energy transition. It facilitates the passage of heat through fluids.Heat is helped to move through empty spaces by radiation.To learn more about conduction, convection, and radiation refer to:
https://brainly.com/question/20493362
#SPJ4
if, at a given temperature, the equilibrium constant for the reaction h2(g) cl2(g) 2hcl(g) is kp, then the equilibrium constant for the reaction hcl(g) h2(g) cl2 (g) can be represented as:
if, at a given temperature, the equilibrium constant for the reaction
H₂ + Cl₂ ----> 2HCl is Kp, then the equilibrium constant for the reaction : 2HCl ----> H₂ + Cl₂ is 1 / Kp.
the equilibrium constant for the reaction
H₂ + Cl₂ ----> 2HCl is Kp,
when we reverse the equation the equilibrium constant becomes reciprocal of original reaction . so the reaction is given as:
2HCl ----> H₂ + Cl₂
this is the reverse reaction of the original reaction ,so the equilibrium constant becomes the reciprocal of the original reaction.
so, the equilibrium constant K'p = 1/ Kp
Thus, if, at a given temperature, the equilibrium constant for the reaction
H₂ + Cl₂ ----> 2HCl is Kp, then the equilibrium constant for the reaction : 2HCl ----> H₂ + Cl₂ is 1 / Kp.
To learn more about equilibrium constant here
https://brainly.com/question/2009610
#SPJ1
What is the concentration of nitrate ion in a solution made by mixing 100 ml of a 0.200 m hno3 solution with 200 ml of a 0.100 m solution of mg(no3)2?
The total concentration (or molarity) of nitrate ions in the mixed solution will be 2 M (2 mol/L).
The nitrate ion in the final solution will originate from both nitric acid and magnesium nitrate. To find the final molarity, it is easiest to find the number of moles originating from nitric acid, then do the same for magnesium nitrate, add those moles together, and divide them by the total volume.
Because 1 mol of nitric acid generates 1 mol of nitrate ions, the amount of nitrate ions will be equal to the amount of nitric acid.
c = n/V ⇒ n = V*c = 0.100 L * 0.200 M = 0.02 mol
On the other hand, 1 mol of magnesium nitrate generates 2 moles of nitrate ions, so the amount of nitrate ions will be double the amount of magnesium nitrate.
n = V*c = 0.200 L * 0.100 M = 0.02 mol of magnesium nitrate ⇒ 0.04 mol of nitrate ions
total amount = 0.02 mol + 0.04 mol = 0.06 mol
total volume = 0.100 L + 0.02 L = 0.03 L
c = n/V = 0.06 mol / 0.03 L = 2 M
You can learn more about molarity here:
brainly.com/question/16727614
#SPJ4
At a fixed temperature and pressure, the volume occupied by a gas is _____ proportional to the number of moles of gas present. For ideal gases under these conditions, equal _____ of gas contain equal numbers of particles or moles.
directly, volumes
At a fixed temperature and pressure, the volume occupied by a gas is directly proportional to the number of moles of gas present. For ideal gases under these conditions, equal volumes of gas contain equal numbers of particles or moles.
The physical behavior of a sample of gas can be described completely by the four variables, pressure (P), volume (V), temperature (T) and quantity (moles). These variables are interdependent. Any one of them can be determined by knowing the other three.
The volume occupied by a mole of gas at STP ( same temperature and pressure) is called the standard molar volume and is very nearly a constant for gases.
Learn more about the laws of gas here:
https://brainly.com/question/10511054
Which of the following provides the most evidence for the theory of plate tectonics?
Plate tectonics is supported by the distribution of fossils. The graphic depicts how four distinct fossilised species were distributed over three continents.
Which one supports the hypothesis of plate tectonics the most?How the plates originally fit together is shown by evidence from fossils, glaciers, and adjacent coasts. Plants and animals formerly lived there, and fossils show us when and where.
According to the idea of plate tectonics, the mantle is covered by a number of different plates that make up the Earth's crust. Compared to the mantle of the Earth, the plates behave like a solid, rigid shell. The lithosphere is this thick outer layer. Continental drift has been replaced by plate tectonics.
Learn more about plate tectonics refer
https://brainly.com/question/2325633
#SPJ9
When attractive forces between molecules are strong in a liquid, the liquid can be described as...
a solid
b.
fluid
C.
viscous
d
definite in shape
When attractive forces between molecules are strong in a liquid, the liquid can be described as solid.
How are attraction forces in solid, liquid, and gas?A solid's internal kinetic energy produces a force that is weaker than the attraction forces between its molecules. The molecules in a solid are kept in close proximity to one another by attraction forces as the attractive forces between molecules are strong.In a liquid, there is more kinetic energy than there is in a solid. In a solid, the stiff attraction between molecules can be broken by kinetic energy. The molecular attraction between them is still strong enough to keep the liquid's molecular structure intact.In comparison to kinetic energy in molecules, kinetic energy in a gas is substantially strong. In a gas, the attraction between the molecules is significantly weaker than the kinetic energy. In this situation, there is no longer any molecular attraction.
To learn more about attractive forces, refer
https://brainly.com/question/19534658
#SPJ13
Calculate the number of moles that are present in 100g of SO₂. Show your work with units.
The number of moles SO₂ that are present in 100g of SO₂ 1.56 moles.
What is the formula for calculating the moles of a substance given the mass of the substance?The moles of a substance is related to the mass of the substance and the molar mass as follows:
mole = mass / molar massthe molar mass of a substance is the mass of 1 mole of the substance.
Molar mass of SO₂ = 32 + 16 * 2
Molar mass of SO₂ = 64
mass of SO₂ in the sample = 100 g
moles of SO₂ = 100 / 64
moles of SO₂ = 1.56 moles
Learn more about moles and molar mass at: https://brainly.com/question/21334167
#SPJ1
Using your knowledge of the Brønsted-Lowry theory of acids and bases, write equations for the following acid-base reactions
a) HNO3 + OH-
b) CH3NH2 + H2O
c) OH- + HPO4-2
2) The compound NaOH is a base by the two of the theories we discussed in class. However, each of the ttwo theories describes what a base is in different terms. Use your knowledge of these ttwo theories to describe NaOH as an Arrhenius base, a Brønsted-Lowry base,
3) Write an equation for the reaction of potassium metal with hydrochloric acid.
4) Write the names for the following acids and bases:
a) KOH ____________________________________
b) H2¬Se ____________________________________
c) C2H3O2H ____________________________________
d) Fe(OH)2 ____________________________________
e) HCN ____________________________________
Using Bronsted - Lowry theory of acid and bases reaction :
a) HNO₃ + OH⁻ -----> NO₃ + H₂O
b) CH₃NH₂ + H₂O ------> CH₃NH₃⁺ + OH⁻
c) OH⁻ + HPO₄²⁻ ⇔ PO₄³⁻ + H₂O
2) NaOH is an Arrhenius base as it dissociates in water to give OH⁻ (hydroxide) and Na⁺ (sodium) ions.
NaOH is Bronsted Lowry base as it accepts H⁺ ion in the given reaction :
HCl + NaOH ---> H₂O + NaCl
3) potassium metal with hydrochloric acid:
2K + 2HCl ----> 2KCl + H₂
4)
a) KOH = potassium hydroxide is strong base
b) H₂Se = hydrogen selenide is acid
c) C₂H₃O₂H = acetic acid
d) Fe(OH)₂ = iron(II)hydroxide is base
e) HCN = hydrogen cyanide is weak base.
T o learn more about acids and bases here
https://brainly.com/question/9936252
#SPJ1
If the frequency of a wave is 7.43 x 10¹4 Hz, is the wave in the visible light spectrum?
The frequency of a wave is V = 4.4 x [tex]10^{2}[/tex] [tex]s^{-1}[/tex].
The visible light spectrum is the part of the electromagnetic spectrum that can be seen by the human eye. This wavelength range is simply called visible light. Normally the human eye can see wavelengths between 380 and 700 nanometers. Visible light made up of the individual colors of the rainbow is only a small part of the electromagnetic spectrum. Another kind of light is radio waves.
The wavelength of light waves is approximately 400 to 700 nanometers 4,000 to 7,000 angstroms. Our eyes perceive different wavelengths of light as rainbow colors. Red light has a relatively long wavelength approximately 700 nm in length. Blue and violet light have short wavelengths of about 400 nm and the visible light spectrum is part of the spectrum of electromagnetic radiation visible to the human eye.
Learn more about Visible light here:-https://brainly.com/question/20930002
#SPJ1
if you gently shake a separatory funnel containing a carboxylic acid with chloroform and aq nahco3, the organic acid will be found where? (multiple answers possible)
If you gently shake a separatory funnel containing a carboxylic acid with chloroform and aq NaHCO3, the organic acid will be found in the top layer and the aqueous layer.
Here's the complete question:
If you gently shake a separatory funnel containing a carboxylic acid with chloroform and aq NaHCO3, the organic acid will be found where? (Multiple answers possible)
a) The top layer b) The bottom layer. c) The organic layer. d)The aqueous layer. e) As an insoluble solid.
Generally, Acid-base extractions are used in extracting Carboxylic acids from the organic layer to the aqueous and top layer by shaking them with a basic solution.
Learn more on Acid base extraction from:
https://brainly.com/question/14606183?referrer=searchResults
#SPJ4
what is meant by the term bumping? select one: agitating a liquid with a stir bar or stirring rod one liquid coming in contact with another suddenly increasing the temperature on a liquid sudden and uncontrolled boiling of liquid
Bumping is the sudden and uncontrolled boiling of liquid.
Bumping is a word used in chemistry to describe the situation where homogeneous liquids boiled in a test tube or other container will superheat and, upon nucleation, rapid boiling will expel the liquid from the container. This happens when liquids are heated up beyond their boiling points and it causes them to burst out of their containers.
Learn more on Boiling liquids from:
https://brainly.com/question/14620648?referrer=searchResults
#SPJ4
A chemical reaction with 28g of reactants is completed in a closed system (all of the reactants are used up and none of the products escape). What is the mass of the products?
From the law of the conservation of mass, we can see that the mass of the products in the system is 28 g.
What is the Law of conservation of mass?The law of conservation of mass states that the mass of the system before the reaction ought to be the same as the mass of the system after reaction. Seeing that we have 28g of reactants is completed in a closed system (all of the reactants are used up and none of the products escape), we now now need to determine the mass of the products.
If we consider the law of conservation of mass, then we must have to agree that the mass of the product would be 28 g.
Learn more about conservation of mass:https://brainly.com/question/13383562
#SPJ1
Need this quick to correct my chem quiz, will give brainliest!
ROUND the answer for each problem to the CORRECT number of significant figures.
A: (7.31 × 10^4) + (3.23 × 10^3)
B: (8.54 × 10^-3) - (3.41 × 10^-4)
C: 4.35 dm × 2.34 dm × 7.35 dm
D: 4.78 cm + 3.218 cm + 5.82 cm
E: 38,736 km ÷ 4,784 km
Answer:
A I did this and got an 100 eazy
the mass of fe(s) produced when 1 faraday is used to reduce a solution of feso4 is 1.5 times the mass of fe(s) produced when 1 faraday is used to reduce a solution of fecl3.
Fe2+ requires 2 Faraday / mol Fe (s) or 1 Faraday → 1/ 2 mol Fe(s) Fe3+ require 3 Faraday / mol Fe (s) or 1 Faraday → 1/3 mol Fe (s) for equal numbers of Faraday (1/2 : 1/3 as 1.5 : 1) (Or inverse relationship is clear) no 2nd point unless flow of e¯ to mass (moles) is clear and logically correct
Is faraday unit of charge?The faraday is a dimensionless measure of the amount of electric charge, or roughly 6.02 × 10²³ electric charge carriers. This exists even referred to as Avogadro's constant and is equivalent to one mole. The coulomb (C) is the most popular unit for measuring the amount of electric charge in the International System of Units (SI).
Fe2+ requires 2 Faraday / mol Fe (s) or 1 Faraday → 1/ 2 mol Fe(s) Fe3+ require 3 Faraday / mol Fe (s) or 1 Faraday → 1/3 mol Fe (s) for equal numbers of Faraday (1/2 : 1/3 as 1.5 : 1) (Or inverse relationship is clear) no 2nd point unless flow of e¯ to mass (moles) is clear and logically correct
To learn more about faraday refer to:
https://brainly.com/question/4418412
#SPJ9
Why are valence electrons important?
A) They shield the other electrons from the nucleus.
B) They are mostly empty space.
C) They make up the bulk of the mass of the atom.
D) They participate in bonding.
How many total oxygen atoms are shown in the scenario below?
3CO₂ + H₂O
O a. 2
O b. 3
O c. 6
O d. 7
O e. 8
Answer:
d. 7
Explanation:
3CO2 => 3 x 2 => 6 atoms
H20 => 1 => 1 atoms
to increase the water solubility of resorcinol or salicylic acid, 3m naoh is used to dissolve them. why do they dissolve better in naoh than in water?
To increase the water solubility of resorcinol or salicylic acid, 3m naoh is used to dissolve them. the reason why they dissolve better in NAOH than in water is because resorcinol as well as salicylic acid have some measures of acidic hydrogens and so they can be ionized inside of NaOH.
How does salicylic acid dissolve in water?
Salicylic acid must be transformed into salicylate because it is insufficiently soluble in water at room temperature to produce the composition you want.
Note that Salicylic acid can be used to accomplish this by reacting with sodium bicarbonate (baking soda) in water; the salicylic acid will dissolve during the reaction.
Learn more about water solubility from
https://brainly.com/question/24057916
#SPJ1
I’ve has density of 0.92g/cm what will ice do in water
The unknown liquid must have a density that is lower than that of water since ice will only float in liquids that are less dense than water.
Briefing:For your information, ice has a density of 0.92 g/cm³ but water has a density of 1 g/cm³. Only liquids less dense than 0.92 g/cm³ will cause ice to sink. The unknown liquid must have a density that is lower than that of water since ice will only float in liquids that are less dense than water.
Why is ice low density?Other liquids have denser solid phases due to the tightly packed arrangement of molecules at lower temperatures. Although the water ice's hydrogen bonds are strong, their orientation causes molecules to push apart, which lowers density.
To know more about Low density visit:
https://brainly.com/question/12022043
#SPJ10
In the first reaction of the citric acid cycle, oxaloacetate, which contains blank______ carbons, is combined with acetyl-coa, which contains blank______ carbons in its acetyl group, to produce citric acid, which contains blank______ carbons.
In the first reaction of the citric acid cycle, oxaloacetate, which contains 4 carbons, is combined with acetyl-coa, which contains 2 carbons in its acetyl group, to produce citric acid, which contains 6 carbons.
What is carbon?
Chemical element carbon has the atomic number six and the letter C assigned to it. It has a monovalent atom, which means that four of its electrons may be used to create covalent chemical connections. It is nonmetallic. The element table's group 14 includes it. The crust of the Earth contains barely 0.025 percent carbon.
Therefore,
In the first reaction of the citric acid cycle, oxaloacetate, which contains 4 carbons, is combined with acetyl-coa, which contains 2 carbons in its acetyl group, to produce citric acid, which contains 6 carbons.
To learn more about carbons from the given link:
https://brainly.com/question/20994647
#SPJ9