After balancing the following equation, what is the coefficient in front of hydrogen?
___Co(s) + ___HCl(aq) —> ___CoCl3(aq) + ___H2(g)
a) 1
b) 2
c) 3
d) 4
e) 6

They shouldn't have made a choice based on the frozen metals because scientific research is based on accepted procedures, not on personal bias.

Briefing:

A researcher that is biased is unable to look at experimental observations objectively before drawing any conclusions. Bias is the biggest trap that needs to be avoided when performing a scientific investigation.

When there is a discrepancy between the observation and interpretation of data in a scientific investigation, a bias is introduced.

In the instance of this inquiry, the researchers were already interested in determining whether it was possible to obtain a fuel without carbon. They reached a lobe-sided, unscientific conclusion because they forgot to fully study the chunks of frozen metal since their brains were so clouded by this bias.

To know more about metals, visit:

https://brainly.com/question/29404080

#SPJ1

Answer:

D) It tells what fraction of a radioactive sample remains after acertain length of time.

Explanation:

The lewis structure of Chloamine can be given as above.

If one element shares electron with another elements to form bond. This is called as covalent bond. The compound which contain Covalent bond called Covalent compound.

Nitrogen is one of the elements of periodic table. It has 7 as atomic number and 14 as mass number. Its electronic configuration is 1s2 2s2 2p3. It belongs to 15th group and 2nd period of the periodic table. It accept three electron to get stable electronic configuration.

As we know that, chloramine has the chemical formula NH2Cl. Nitrogen has five valence electrons, each hydrogen has one valence electron, and chlorine has seven valence electrons.

Thus, we concluded that Nitrogen form three single bond two with hydrogen and one with chlorine atom.

learn more about lewis structure:

https://brainly.com/question/20300458

#SPJ1

The cellulosic ethanol cellulosic ethanol grain ethanol grain ethanol methane are considered biofuels. The two most common biofuels used today are ethanol and biodiesel.

Both of which are the  first generation biofuel technologies. The BETO is working with industry to develop next-generation biofuels from waste, the cellulosic biomass, and algae-based resources. Ethanol (often derived from corn in the United States and sugarcane in Brazil), biodiesel (derived from vegetable oils and liquid animal fats), green diesel (derived from algae and other plant sources), and the biogas are examples of the biofuels (methane derived from animal manure and other digested organic material).

To learn more about biofuels, click here.

https://brainly.com/question/502679

#SPJ4

The molality of the solution from the elevation of boiling point and elevation constant is obtained as 0.79 molal. From this, the weight of iron chloride is added is 77.6 g.

Molality of a solution is the ratio of the number of moles of solute to the mass of solvent in kg. The elevation in boiling point of a solution by the addition of a solute is proportional to the molality by the equation:

ΔT = Kb m.

Given ΔT = 127.3 - 126 = 1.3 °C.

Kb = 1.63 °C Kg /mol.

mass of solvent = 600 g = 0.6 Kg

molality = ΔT / Kb

             = 1.3 °C / 1.63 °C Kg /mol

             = 0.79 mol/kg.

Molality = 0.79 Kg/mol = number of moles of FeCl₃ / 0.6 Kg

no.of moles of FeCl₃ = 0.79 Kg /mol × 0.6 Kg = 0.47  moles

Therefore, the mass of FeCl₃ added is:

= no.of moles × molar mass

= 0.47 ×  162.3 g/mol = 77.61 g.

Therefore, the mass of  FeCl₃ added is 77.61 g.

To find more on molality, refer here:

https://brainly.com/question/17034043

#SPJ1

The organic phase is a solvent, usually dichloromethane or diethyl ether, that disperses very little in water. The 9-fluorenone was dried, isolated, and saltified with sodium sulfate.

There are a number of extraction processes, including solvent extraction, distillation, pressing, and sublimation, that can be used. Solvent extraction is the method that is most frequently used.

extracting liquid from liquid When a substance is "extracted," it is moved from a solid or liquid into a separate solvent or phase. The method most frequently used in chemical labs is liquid-liquid extraction, which takes place in a separatory funnel.

To know more about Sodium visit:-

https://brainly.com/question/29327783

#SPJ4

The numbers is moles in the gas sample is 0.032

Since we know that the I deal gas equation is

PV=nRT

where ,

P is pressure

V is volume

n is no. of moles

R is gas constant (8.3145 J⋅mol^−1⋅K^−1)

T is temperature ( in Kelvin)

P =1.11 atm

T = 40.04 + 273

= 313.04 K

V= 76.87L

substituting the given values in the ideal gas equation we get,

1.11x76.87=n x 8.3145 x 313.04

n=(1.11x76.87)/(8.3145x313.04)

n=0.032

Hence the moles in the sample are 0.032 .

To know more about ideal gas equation,

https://brainly.com/question/16109961

Answer:

Moving from one environment to another causes it to change

Pancreatic amylase is able to break down starches, but not lipids because enzymes bind only to their specific substrates.

Pancreatic amylase is the enzyme secreted by pancreas. One of the important features of all the types of enzymes is the substrate specificity. It ensures that enzyme perform the chemical reaction they are specifically intended to do.

We also see salivary amylase secretion in the mouth which begins the breakdown process of our food. It is again directed towards carbohydrates for instance starch. Lipids are digested by emulsification and proteins are digested by breakdown through peptidases.

Learn more about enzymes -

https://brainly.com/question/1596855

#SPJ4

A. If the atoms have radius r, then the length of the cube edge is √8 times f  statements concerning a face- centered cubic unit cell and the corresponding lattice, made up of identical atoms, is incorrect.

74% of the FCC lattice's space is used for packing. Let n be the number of atoms or spheres, where n is equal to 4, and let r be the radius of the sphere and a be the length of the cube's edges.

A face-centered cubic unit cell structure is made up of atoms organized in a cube with a fraction of an atom at each corner and six extra whole atoms at the center of each cube face.

In this unit cell, there are 14 lattice points, eight of which are corner atoms while the remaining six are located in the middle of each face.

learn more about  face-centered cubic refer

https://brainly.com/question/17111818

#SPJ4

A gas is transported in a horizontal pipeline at a flow of 10.000 lb.„/min. If it is moving at 10 ft.'s, -6045 HP rate of work (in horsepower) must be performed on the gas to increase its velocity to 200 ft/s at the same temperature and pressure

This equation may be used to compute work: Work equals Force x Distance. The Newton metre is the SI unit for work (N.m). One joule is the amount of work done when one Newton of force pushes an item one metre.

Because the force transmits one unit of energy when it does one unit of work, the rate of accomplishing work equals the rate of utilising energy. A horsepower is equivalent to 550 foot pounds per second, while a kilowatt is equal to 1000 watts.

Given that,

A gas is transported in a horizontal pipeline at a flow of 10.000 lb/min

m = (10000÷60) lb/sec

m = 166.67 lb/sec

and, v₁ = 10 ft/sec

v₂ = 200 ft/sec

Now,

or, m [(v₂²  - v₁²)/2] = - w

or, w = m/2 × [(v₁²  - v₂²)]

or, w = 166.67/2 × [(10)² - (200)²]

or, w = -3325000 lb. ft².s⁻¹

or, w = -3325000 / 550 HP

or, w = -6045 HP

To know more about rate of work refer to:

https://brainly.com/question/169382

#SPJ1

The correct answers to the problem given above about germanium IV oxide are as follows:

GeO₂ is a chemical compound also known as germanium oxide, germanium dioxide or germanium IV oxide. It is a polar covalent which is a soluble substance to some extent.

In conclusion, it can be deduced from the explanation given above that germanium IV oxide is a chemical compound.

The complete lewis structure of germanium IV oxide is attached.

Complete question:

Answer the following questions about germanium IV oxide, GeO₂

a. Determine its lewis structure.

b. Its bonding pairs/lone pairs

c. What is its electron geometry (GeO₂)?

d. Its shape (GeO₂)?

e. Is germanium IV oxide a polar or non-polar molecule?

Read more on lewis structure:

https://brainly.com/question/11554350

#SPJ1

Weather is created by differences in air pressure and temperature and moisture.

Six main factors make up the weather. These include the following: temperature, atmospheric pressure, the development of clouds, wind, and precipitation. A minor modification to any of these elements may result in a new weather pattern. Every variation in the weather has a cascading effect that affects everyone on the planet.

The sun only warms half of Earth at a time, leaving the other side in shadow. As a result, the sun heats the surface of the Earth unevenly each day, heating some areas more than others. Winds, clouds, and precipitation are all brought on by these temperature differences.

To know more about weather visit:

https://brainly.com/question/9662539

#SPJ1

The length of the solid to be 6.5 cm and the height to be 5.1 cm. the thickness of the metal rectangular solid(mm) is 4.58 mm.

given that :

height of solid = 5.1 cm

length of solid = 6.5 cm

the initial volume of graduated cylinder = 32.9 mL

the final volume of graduated cylinder = 48.1 mL

the volume of the solid = 48.1 - 32.9

                                      = 15.2 mL = 15.2 cm³

the volume expression for the solid is given as :

volume = length × width × height

15.2 cm³ = 6.5 cm × width × 5.1

width = 15.2 / 33.15

Width = 0.458 cm  = 4.58 mm

Thus, the thickness of metal = 4.58 mm

To learn more about graduated cylinder here

https://brainly.com/question/23122699

#SPJ4

CaCl₂ has lowest freezing point as it has higher "im" value.

A solution's freezing point is lower than that of the pure solvent's. It follows that freezing cannot happen until a solution is lowered to a temperature lower than the pure solvent.

As we know more "im" value lowest is the freezing point.

Here,

m = molarity

i = van't Hoff factor = 1 + (n-1) α

α = degree of ionization

n = number of ions.

A. 0.25 MOL /LITER SUCROSE = 0.25 M SUCROSE

m = 0.25 M

Sucrose is non-electrolyte, so α = 0

or, i = 1 + (n-1) × 0

or, i = 1

So, im = 1 × 0.25 M

im = 0.25 M

B.  0.15 MOL/L CaCl₂ = 0.15 M CaCl₂

m = 0.15 M

CaCl₂ → Ca⁺² + 2Cl⁻

no. of ions (n) = 3

CaCl₂ is electrolyte, so α = 1

Thus,  i = 1 + (3-1) × 1

or, i = 3

So, im = 3 × 0.15 M

or, im = 0.45 M

C. 0.15 MOL/L NaCl = 0.15 M NaCl

m = 0.15 M

NaCl → Na⁺ + Cl⁻

no. of ions = 2

NaCl is electrolyte, so α = 1

Thus,  i = 1 + (2-1) × 1

or, i = 2

So, im = 2 × 0.15 M

or, im = 0.30 M

D. 0.2 MOL/L NaNO₃ = 0.2 M  NaNO₃

m =  0.2 M

NaNO₃ → Na⁺ + NO₃⁻

no. of ions = 2

NaNO₃ is electrolyte, so α = 1

Thus,  i = 1 + (2-1) × 1

or, i = 2

So, im = 2 × 0.2 M

or, im = 0.40 M

Among these four aqueous solution, CaCl₂ has higher "im" value thus it has lowest freezing point.

Correct option: B

To know more about freezing point refer to:

https://brainly.com/question/27184453

#SPJ1

Answer:

To find the density of a box, you will need to divide its mass by its volume. The density of an object is a measure of how much mass is contained in a given volume.

The volume of the box can be calculated by multiplying its length, width, and height:

volume = 2 cm x 4 cm x 10 cm = 80 cm^3

To find the density of the box, you will need to divide its mass by its volume:

density = mass / volume

= 120 g / 80 cm^3

= 1.5 g/cm^3

Therefore, the density of the box is 1.5 g/cm^3.

3.7*[tex]10^{-20}[/tex] J energy would be required to promote an electron from the n = 11 level to the n= 12 level.

According to particle in a box model energy is

E=[tex]\frac{n^{2} }{8ml^{2} } h^{2}[/tex] where n = no of energy level = 10

                          h is Planck constant, m is mass of electron= 9.1*[tex]10^{-31}[/tex]kg

and l is length of box= 140pm= 140*[tex]10^{-10}[/tex] m.

so E =3.7*[tex]10^{-20}[/tex]J.

What is particle in a box model?

The particle in a box model, sometimes referred to as the infinite potential well or the infinite square well, in quantum mechanics depicts a particle that is free to travel in a constrained area enclosed by impenetrable barriers.

Read more about particle in a box model:

https://brainly.com/question/15021026

#SPJ1

Answer: Alpha emission, beta emission, postitron emission,electron capture and gamma emission.

Explanation:

A=- \frac {dN}{dt}Another important atomic clock used for dating purposes is based on the radioactive decay of the isotope carbon-14                                      As an example, iodine-131 is a radioisotope with a half-life of 8 days. It decays by beta particle emission into xenon-131. After eight days have passed, half of the atoms of any sample of iodine-131 will have decayed, and the sample will now be 50% iodine-131 and 50% xenon-131.              

There is 1000 mg Vanco in 250 ml of 5w over 2 hrs. The drip rate of Vanco is 125 ml/hr.

Drip rate is a term used to describe the rate of an intravenous infusion depending on the number of drops (gtt) given to the patient each minute.

To conduct this calculation, you must know the total volume to be infused in milliliters, as well as the infusion time. Use the following formula.

To calculate the drip rate. The volume of the medicine is divided by the number of hours.

Given, the number of hours = 2 hrs

The volume of the Vanco is = 250ml

250 / 2 = 125 ml/hr

Therefore, the drip rate is 125 ml/hr.

To learn more about drip rate, refer to the link:

https://brainly.com/question/16544112

#SPJ1

The right answer is E.

The decarboxylation of pyruvate to acetyl-CoA and the production of NADH and CO2 are irreversible reactions that are catalyzed by the multi-enzyme complex known as pyruvate dehydrogenase. Pyruvate is introduced into the TCA cycle through the complex.

Two regulatory enzymes, three catalytic enzymes, and a binding protein make up the enzyme complex. There are three enzymes:

1. Thiamine pyrophosphate (TPP) is used as the prosthetic group by pyruvate dehydrogenase (E1).

2. Dihydrolipoyl transacetylase (E2), which has as its prosthetic groups coenzyme A and lipoamide.

3. Nicotinamide adenine dinucleotide (NAD+) and flavin adenine dinucleotide (FAD) serve as cofactors for dihydrolipoyl dehydrogenase (E3).

Hence, The correct response is option E since E2 needs coenzyme A as one of its co-factors.

To learn more about Enzymes click on the link

https://brainly.com/question/1596855

#SPJ4

The electron configuration of the atom with the most negative electron affinity is  1s² 2s² 2p⁶ 3s¹ sodium (Na)

When an atom gains an electron, there is an energy change called electron affinity.

Eea = X(g) + e⁻ ⇒ XE

E stand for change in energy  (E)

Eea stands for electron affinity.

Affinity for electrons frequently has negative energy levels. An electron can be added to an atom more readily the more negative the electron affinity. The periodic table shows that electron affinities increase with period.

Because electrons are added to energy levels, which brings them closer to the nucleus, there is a stronger attraction between the nucleus and its electrons, increasing electron affinity higher for the groups and from left to right across periods of a periodic table.

However, a few exceptions:

1. Elements in group 18 (8A) have electron affinities that are larger than zero. This is due to the atom's filled valence shell, which prevents an electron from being added without it moving to a lower energy shell.

2. Because adding an electron necessitates that it stay in the previously vacant p sub-shell, group 2 (2A) elements have higher electron affinities.

3. Due to the necessity of adding an electron to an orbital that is already occupied, group 15 (5A) elements have higher electron affinities.

Putting these things into practice with the components listed in the question

(i) 1s² 2s² 2p⁶ 3s¹ = 11 Sodium (Na)

(ii) 1s² 2s²2p⁶ 35² = 15 Phosphor (P)

(iii) 1s² 2s² 2p⁶ 3s² 3p¹ = 13 Aluminum (Al)

(iv) 1s² 2s² 2p⁶ 3s² 3p⁴ = 16  Sulfur( S)

(v) 1s² 2s² 2p⁶ 3s²= 12 Magnesium (Mg)

We knew that, electron affinity increases upward for the groups and from left to right across periods so, the electron congifuration that have the most negative electron affinity is sodium (Na)  1s² 2s² 2p⁶ 3s¹ .

Learn more about electron affinity at https://brainly.com/question/14351799

#SPJ4

The compound that is formed from the combination of NH₄⁺ and SO₃²⁻ is (NH₄)₂SO₃ and the compound that is formed from the combination calcium ion and phosphate ion is Ca₃(PO₄)₂.

Definition of Ionic bond

A bond that is formed by the complete transfer of some electrons from one atom to another is known as an ionic bond. The atom which loses one or more electrons becomes a cation—a positively charged ion. The atom which gains one or more electron becomes an anion—a negatively charged ion.

The term "ionic bonding" is given "when the ionic character is greater than the covalent character".

Learn more about ionic bond from the link given below.

https://brainly.com/question/1747704

#SPJ4

Use equation: (C=m/V). Now, the known concentration of copper(ll) ion solution and a colorimeter to produce a cu(ll) ion conc./absorbance calibration curve. you will be able to read its conc. from the curve.

A titration is a technique in which a solution of known concentration is used to determine the concentration of an unknown solution. The titrant (the known solution) is added from a buret to a known quantity of the analyte (the unknown solution) until the reaction is complete.

A calibration curve is a way to identify the concentration of an unknown compound. These curves use data points of known compounds at varying concentrations, and researchers or developers can use these curves to find where an unknown substance plots.

Learn more about burette below:

https://brainly.com/question/25311014

#SPJ4

The enthalpy change for the following reaction is -318 kJ. Using bond energies, estimate the O-F bond energy in OF₂(g).

OF₂(g) + H₂O(g) -> O₂(g) + 2HF(g) is   190 kJ /mol.

The reaction is given as :

F - O - F  +  H - O - H ----->  O = O +  2H - F

                                           moles       bond energy

bond broken H - O                  2               463  kJ/mol

bond broken O - F                  2                 ?

bond form O = O                     1                  498 kJ/mol

broken form H - F                     2                 565 kJ/mol

enthalpy change =  BE ( bond broken ) - BE (bond form )

- 318                      = (2 (O - F) + 2(463) - (( 498 ) + 2( 565))

- 318 = 2 (O - F) - 698

2 (O - F) = 380

(O - F) = 190 kJ /mol

To learn more about enthalpy change here

https://brainly.com/question/14286181

#SPJ4

The medicine that has to be given by the nurse to prevent cerebral palsy in the new-born is magnesium sulphate.

The term "cerebral palsy" refers to a collection of conditions that impair mobility and posture development and are thought to be caused by non-progressive abnormalities. Insults that caused cerebral palsy are thought to have happened during foetal development or early childhood. A significant risk factor for cerebral palsy is preterm delivery, and that risk rises sharply as gestational age decreases. Right now, 25% of all new occurrences of cerebral palsy are caused by babies delivered before 34 weeks of pregnancy. Cerebral palsy risk is higher when there are several pregnancies. MgSO4 was infused continuously at a rate of 2 g/h for up to 12 hours after a 6 g loading dose. Given before delivery, magnesium sulphate is known to regulate the vasculature and minimize hypoxia effects by neutralising cytokine or excitatory amino acid damage, which may lower the risk.

To know more about pregnancy visit:

https://brainly.com/question/26430164

#SPJ4

Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, the mass in gram of 7.68 x 10²¹atoms of carbon is 0.152g.

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity of amount of substance. It measure the number of elementary entities of a given substance that are present in a given sample. There are so many formula for calculating mole.

we know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number

mole =given number of atoms ÷ 6.022×10²³(Avogadro number)

given number of atoms of carbon=7.68 x 10²¹atoms

Substituting the values

mole= =7.68 x 10²¹÷ 6.022×10²³

mole = 0.0127moles of carbon

number of moles of carbon=given mass of carbon÷ molar mass of carbon

Substituting the values

0.0127= mass of carbon÷12.01g

mass of carbon= 0.152g

Therefore, the mass in gram of 7.68 x 10²¹atoms of carbon is 0.152g.

To know more about mole, here:

https://brainly.com/question/15209553

#SPJ1

Answer:

1.43 x 10^24 molecules

Explanation:

Molecular mass of methane = 12.01 + 4(1.01) = 16.05 g/mol

so mol of 38.25 g equals 38.25g x (1 mole/16.05g = 2.38 mol

1 mole = 6.022 x 10^23 molecules

so 2.38 mol will have 2.38 x 6.022 x 10^23 = 1.43 x 10^24 molecules

The age of wood 2880 years.

People who passed away would be interred in the tombs of the Ancient Egyptians.This was significant to the Egyptians because they held the view that as long as a person was properly buried in their tomb, life remained even after death.

The sarcophagus was intended to serve as the occupants' eternal home in the afterlife, according to ancient Egyptian belief.Pharaohs and rich citizens' sarcophagi were ornately decorated with carvings and painting.

To know more about ancient Egyptian tomb visit:

https://brainly.com/question/224985

#SPJ4

Answer: 4480 mL

Explanation:

2.40 grams of C is equal to [tex]2.40/12.011=0.19981683456831[/tex] moles of C.

From the reaction equation, for every mole of C consumed, one mole of CO is produced.

This means that 0.19981683456831 moles of CO are produced.

Therefore, the volume in milliliters is [tex](0.19981683456831)(22.4)(1000)=4480[/tex] mL.

The volume of CO gas produced by the complete reaction of 2.40 g of C solid at STP is approximately 4.47 L (or 4470 milliliters).

To calculate the volume of CO gas produced, we first need to determine the number of moles of C reacting. Given that 2.40 g of C is provided, we can convert this mass to moles using the molar mass of carbon (12.01 g/mol).

Moles of C = Mass of C / Molar mass of C

Moles of C = 2.40 g / 12.01 g/mol

Moles of C ≈ 0.1998 mol

Now, we use stoichiometry from the balanced chemical equation to find the number of moles of CO produced. From the equation, the molar ratio between C and CO is 1:1.

Moles of CO = Moles of C

Moles of CO ≈ 0.1998 mol

Finally, we use the ideal gas law at STP (22.4 L/mol) to calculate the volume of CO gas:

Volume of CO gas = Moles of CO * 22.4 L/mol

Volume of CO gas ≈ 0.1998 mol * 22.4 L/mol

Volume of CO gas ≈ 4.47 L

So, the volume of CO gas produced by the complete reaction of 2.40 g of C solid at STP is approximately 4.47 L (or 4470 milliliters).

To learn more about stoichiometry  here

https://brainly.com/question/18382922

#SPJ2

Answer:

The law of conservation of mass states that matter cannot be created or destroyed. If we have an unbalanced equation, atoms are either destroyed or created, which totally violates this law