Answer:
2 amps
Explanation:
Given data
Power = 460W
voltage= 230V
Required
The amperage/ current of the fuse
Recall P= IV
I= P/V
I= 460/230
I=2 amps
Hence the current of the fuse is 2 amps
A car has travelled 450 km in 35 hours. Calculate its velocity.
Its average speed is 12.86 km/hr.
There's not enough information to determine its velocity.
Give an example of speed making a difference in the amount of kinetic energy. Tell how you know that kinetic energy amount is different in your example.
Please help this is due today
Answer:
1. A car moving 40 mph has four times as much kinetic energy as one moving 20 mph, while at 60 mph a car carries nine times as much kinetic energy as at 20 mph. Thus a modest increase in speed can cause a large increase in kinetic energy.
PLZ MARK BRAINLIEST THANK AND FIVE STAR:)
Answer:
a car moving 40mph has four times as much kinetic energy as one moving 20 mph, while at 60 mph a car carries nine times as much kinetic energy as at 20 mph.
if you need any more info just dm me
What was the name of the first oil well in the UAE?
A.Murban
B.ADNOC
C.Murhabba
D.OLPEC
Answer:
B.ADNOCExplanation:
the Abu Dhabi Petroleum Company
The first commercially viable oil discovery was made at Bab in 1960. In 1962, the company was renamed the Abu Dhabi Petroleum Company. Exports began to flow from the Jebel Dhanna terminal on December 14, 1963.
Answer:
hiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
What do plasma cells produce ?
_____________________ show how many atoms of each element are in the compound.
Answer:
2 or more
Explanation:
yes yes yes yes yes yes yes
Equation of motion description is v=20+2t.How big is the initial speed,acceleration?
Answer:
the initial velocity is 20 m/s and the acceleration is 2 m/s²
Explanation:
Given equation of motion, v = 20 + 2t
If V represents the final velocity of the object, then the initial velocity and acceleration of the object is calculated as follows;
From first kinematic equation;
v = u + at
where;
v is the final velocity
u is the initial velocity
a is the acceleration
t is time of motion
If we compare (v = u + at) to (v = 20 + 2t)
then, u = 20 and
a = 2
Therefore, the initial velocity is 20 m/s and the acceleration is 2 m/s²
If potential energy is _____energy. Then Kinetic energy is the opposite. What is the blank?
Answer:
potential energy is like compressed - spring like
Explanation:
Answer:
built up
Explanation:
Because potential means still, it’s possibility’s while kinetic energy is in motion
hope this helps chase
Surfactants, or wetting agents, are chemicals that are used in detergents. These chemicals interfere with hydrogen bonding between water molecules to allow water to more easily penetrate the small spaces between the fibers in cloth.
If an accident released these substances into a pond, what danger would they most likely pose to living things in the pond?
A)The water in the pond would warm and cool more easily.
B)Plants on the bottom of the lake would die because ice would sink.
C)Insects would have trouble walking on the water.
D)The water would be able to dissolve fewer nutrients.
Answer:
D) Insects would have trouble walking on the water.
Explanation:
HELPPPPP MEEEEE PLEASE I NEED TO SUBMIT IN LESS THAN 10 MINSS
Answer:
X = 2146.05 m
Explanation:
We need to understand first what is the value we need to calculate here. In this case, we want to know how far from the starting point the package should be released. This is the distance.
We also know that the plane is flying a certain height with an specific speed. And the distance we need to calculate is the distance in X with the following expression:
X = Vt (1)
However we do not know the time that this distance is covered. This time can be determined because we know the height of the plain. This time is referred to the time of flight. And the time of flight can be calculated with the following expression:
t = √2h/g (2)
Where g is gravity acceleration which is 9.8 m/s². Replacing the data into the expression we have:
t = √(2*2500)/9.8
t = 22.59 s
Now replacing into (1) we have:
X = 95 * 22.59
X = 2146.05 mThis is the distance where the package should be released.
Hope this helps
A swimmer accelerates 4 m/s² while applying a force of 20N. What is the swimmer’s mass?
0.2 kg
5 kg
80 kg
80 pounds
when a material absorbs energy from light the energy causes the material to do what?
Answer:
To change.
Explanation:
The Law of Conservation of energy states that energy cannot be destroyed but can only be transformed or converted from one form to another. For example, light energy to heat energy.
When a material absorbs energy from light the energy causes the material to change.
What is Energy, Work and Power 2. Give an example of each (Energy, Work and Power)
Answer:
Energy:Energy is defined as the ability to do work.Example:Light energy,heat energy etc
Work:When force is applied on an object and it dispaces in the direction of that force then it is said that work has done.Its SI unit is joule
Power:Power is defined as the ratio of work done to the total time.Its SI unit is watt
Which option best describes electromagnetic waves that have enough energy to change atoms or molecules into ions?
A. Waves with low frequency
B. Ionizing radiation
C. Waves with long wavelength
D. Non-ionizing radiation
Answer:
B.Ionizing radiation is the correct answer.
Explanation:
Ionizing radiation has sufficient energy that it can convert atoms and molecules into ions.
It has a sufficient amount of energy that it can separate tightly confined electrons from the orbit of an atom and causing that atom to become ionized.
Answer: lonizing radiation
Explanation:
Got it right
7. An object with a weight of 19.6 N moves with a constant velocity of 20.0 m/s. A net
force of 6.00 N is applied to the object in the direction of its motion for 4.00 seconds.
What is the final momentum of the object?
Answer:
118.4kgm/s
Explanation:
Given parameters:
Weight of object = 19.6N
mass of object = 19.6/9.8 = 2kg
Constant velocity = 20m/s
Force applied = 6N
Time taken = 4s
Unknown:
Final momentum of the object = ?
Solution:
To solve this problem, we use Newton's second law of motion;
Ft = m (v - u)
F is the force applied
t is the time taken
m is the mass
v is the initial velocity
u is the time taken
Ft = mv - mu
mv is the final momentum;
So;
Final momentum = Ft + mu
Final momentum = (19.6 x 4) + (2 x 20) = 118.4kgm/s
There are several ways to model a compound. One type of model is shown.
What is the chemical formula for the molecule represented by the model?
CHO
C4H9O2
C4H8O
C3H8O2
Answer:
What is the chemical formula for the molecule represented by the model?
[tex] →CHO\\ →C_4H_9O_2✓ \\→C_4H_8O \\ →C_3H_8O_2[/tex]
2) C4H9O2 is the right answer.A 40kg box of junk food is being pushed along a wooden floor with a force of 100N. If the coefficient of friction is 0.2, what will be the acceleration of the box? Remember to show the equation you are using, then substitutions, then final answer.
A tire rotates 50 times in 2.5 seconds what is its period?
Answer:
0.05s
Explanation:
Given parameters:
Number of rotations = 50times
Time taken = 2.5s
Unknown:
Period = ?
Solution:
The period is the time taken for a body to make one complete rotation. It is mathematically expressed as;
Period = [tex]\frac{time taken}{number of rotation}[/tex]
Period = [tex]\frac{2.5}{50}[/tex] = 0.05s
Select ALL THAT APPLY to the following situation.
No work is done when:
an object is lifted straight up off the ground
1 an object stays at rest
an object is moved in the same direction as the force acting on it
an object is moved in a different direction than the forces acting on it
Explain the motion of a car as the wheels spin
I'm a bit late, but here's an answer
The motion of a car and the wheel is kinda interesting, actually. If the wheel is turned right, the wheels will turn right. If it's left, the wheels will go left, you get the idea. The car will move that direction if it's in motion, though.
Answer:
In space, rockets zoom around with no air to push against. ... Rockets and engines in space behave according to Isaac Newton's third law of motion: Every action produces an equal and opposite reaction. When a rocket shoots fuel out one end, this propels the rocket forward — no air is required.
Explanation:
:p
- 0utc8st
Which situations will NOT increase the reactions rate of most chemical reactions?
A) an increase in temperature
B) grind up the solute to increase surface area before mixing
C) by increasing the pressure in which the reaction takes place
D) decreasing the concentrations of the substances in the reaction
Answer:
D
Explanation:
Increasing temperature or pressure some times make the condition favorable to the reaction. Similarly increasing surface area of reacting mixture also helps to increase the reaction rate.
What is reaction rate ?The rate of a reaction is the rate of decrease in concentration of reactant or the rate of increase in concentration of the products. The rate of a reaction depends on several factors such as temperature, pressure, surface area etc.
Fir an endothermic reaction, as the temperature increases, reaction rate increases. Similarly, as the pressure increases, the reaction in which the number of moles of gaseous reactants is higher than that in products, rate increases.
The concentration of reactants must be sufficient for the reaction and decreasing the concentration of reactants does not favor an increase in reaction rate. Hence, option D is correct.
Find more on reaction rate :
https://brainly.com/question/8592296
#SPJ2
Three sharks are located at the vertices of an equilateral triangle whose side equals LL. They all start moving simultaneously with a constant speed vv, with the first shark heading constantly toward the second, the second toward the third, and the third toward the first. How soon will the sharks converge at one point
Answer:
They will never meet.
Explanation:
Given that three sharks are located at the vertices of an equilateral triangle whose side equals LL. They all start moving simultaneously with a constant speed vv, with the first shark heading constantly toward the second, the second toward the third, and the third toward the first. How soon will the sharks converge at one point ?
Since the three sharks are located at the vertices of an equilateral triangle whose side equals, and the first shark is moving toward the second, the second is moving toward the third, and the third shark is moving toward the first, the movement of the three shark will form a circular motion.
Since the three sharks are moving at a constant speed, the three sharks will never meet because the distances between them are also the same.
The three sharks will therefore continue to move till infinity.
hello! Someone please help me with this.
Explanation:
VT= 10 v
IT = V/R = 10/5= 2 A
RT= 5 ohm
PT = 20w
[tex] {i}^{2} \times r = {2}^{2} \times 5 = 20watts[/tex]
A 0.015 kg marble sliding to the right at 22.5 m / s on a frictionless surface causes an elastic frontal collision with a 0.018 kg marble moving to the left at 18 m / s. After the collision, the first marble moves to the left at 18 m / s. Find the speed of the second marble after the collision.
Answer:
I don't know the answer.
Explanation:
Im not smart <3
A 55-kg box rests on a horizontal surface. The coefficient of static friction between the box and the surface is 0.30. A 140-N force is applied to the box. What is the frictional force on the box?
Answer:
161.7N
Explanation:
Given parameters:
Mass of the box = 55kg
Coefficient of friction = 0.3
Applied force = 140N
Unknown:
Frictional force on the box = ?
Solution:
The frictional force on the box is a force that opposes the motion of the box.
To find the value of this force;
Fr = u m g
u is the coefficient of static friction
m is the mass
g is the acceleration due to gravity
So;
Fr = 0.3 x 55 x 9.8 = 161.7N
What type of waves can be found during a Tsunami?
Normal ocean waves are caused by the wind, weather, tides, and currents, whereas tsunamis are powered by a geological force. Tsunami waves are surface gravity waves that are formed as the displaced water mass moves under the influence of gravity and radiates across the ocean like ripples on a pond.
hope this helps! ^^
____________________________________________________________
通常の海の波は風、天候、潮汐、海流によって引き起こされますが、津波は地質学的な力によって動かされます。津波は、変位した水塊が重力の影響下で移動し、池のさざ波のように海を横切って放射するときに形成される表面重力波です。
お役に立てれば！ ^^
of the following states of motion, the one which requires balanced forces is:
A: a decrease in speed in a straight line
B: an increase in speed in a straight line
C: constant speed in a straight line
D: a change in the direction of the motion
A balanced force is required for a change in the direction of the motion.
What is a force?According to Newton's second law of motion, the force applied to a body is directly proportional to the product of mass and acceleration of the body.
Balanced forces
Balanced forces are those that are opposite in direction and equal in size. When forces are balanced there is no change in direction.
Thus, when there is change in direction, a balance force can be applied to cancel the change in direction of motion.
Learn more about balanced forces here: https://brainly.com/question/485828
An egg is drown at a wall and breaks. A second egg is thrown at the same velocity and collides with a bed sheet. The egg does not break. Why does the egg not break when it hits the sheet?
Answer:
The first egg is thrown at a wall and breaks because it has no time to decelerate and it breaks.
While, when a second egg is thrown at wall with same velocity and collides with a bed sheet, it does not break because it get more time to decelerate or collide with the wall. It reduces the amount of force exerted on the egg and it does not break.
NEED ANSWER ASAP
Common topics of physics include:
a forms of energy
b sound
C magnetism
d evolution
Answer:
a
Explanation:
Answer:
C
Explanation:
C
Do all metals stick to magnets? Give an example. I NEED HELP FASTT
Answer:
No
Explanation:
Not all metals stick to magnets. Like aluminum. if you were to stick a magnet on to an aluminum it would fall off.
If you go to Mars would you be heavier or lighter
Answer:
I mean you could just look it up... but here the answer for you ,so you know it's right...
Explanation:
:)