When using a coil of thick copper wire containing 24 turns, the voltmeter would read 168 volts
To determine the new voltmeter reading when using a coil with multiple turns, we'll use Faraday's Law of Electromagnetic Induction. Faraday's Law states that the induced electromotive force (EMF) in a closed loop is equal to the negative rate of change of magnetic flux through the loop. The formula for Faraday's Law is:
EMF = -N * (ΔΦ/Δt)
where EMF is the induced electromotive force, N is the number of turns in the coil, ΔΦ is the change in magnetic flux, and Δt is the change in time.
Since we know the initial voltmeter reading with a single wire (7 volts), we can use this information to determine the change in magnetic flux (ΔΦ/Δt) for the single wire:
7 volts = -1 * (ΔΦ/Δt)
Now, we can find the induced EMF for the coil with 24 turns:
EMF = -24 * (ΔΦ/Δt)
We already know the value of ΔΦ/Δt from the single wire, which is -7. So we can plug that value into our formula:
EMF = -24 * (-7)
EMF = 168 volts
Therefore, when using a coil of thick copper wire containing 24 turns, the voltmeter would read 168 volts.
learn more about electromotive force Refer: https://brainly.com/question/13753346
#SPJ11
Which stars are the most common?
A) Stars with a larger mass and a larger radius than the Sun's are the most common.
B) Stars with a smaller mass and a smaller radius than the Sun's are the most common.
C) Stars with a larger mass and a smaller radius than the Sun's are the most common.
D) Stars with a smaller mass and a larger radius than the Sun's are the most common.
E) All of the above are equally common.
Stars are born within the clouds of dust and scattered throughout most galaxies. A familiar example of such as a dust cloud is the Orion Nebula. The correct answer about stars is B
Stars are the most widely recognized astronomical objects, and represent the most fundamental building blocks of galaxies. The age, distribution, and composition of the stars in a galaxy trace the history, dynamics, and evolution of that galaxy. Moreover, stars are responsible for the manufacture and distribution of heavy elements such as carbon, nitrogen, and oxygen, and their characteristics are intimately tied to the characteristics of the planetary systems that may coalesce about them. Consequently, the study of the birth, life, and death of stars is central to the field of astronomy. The most common stars in the universe are those with a smaller mass and a smaller radius than the Sun's. Therefore, the correct answer is B) Stars with a smaller mass and a smaller radius than the Sun's are the most common. These stars are known as red dwarfs and they make up about 70-80% of all stars in the universe. Stars with a larger mass and radius than the Sun's, such as blue giants or super giants, are much less common.
learn about stars,
https://brainly.com/question/5284480
#SPJ11
Question 12
The greatest exposure to human made ionizing radiation for most individuals is through:
a. Eating plants that contain radioactive elements
b. Medical x-rays
c. Nuclear power plant emissions
d. Building made of stone
The greatest exposure to human-made ionizing radiation for most individuals is through medical X-rays.
Therefore the answer is b. Medical x-rays.
Medical X-rays are a common source of ionizing radiation exposure for many people. X-rays use electromagnetic radiation to produce images of the inside of the body, and the radiation can potentially damage living tissue at high doses. While the dose from a single X-ray is usually small, frequent or unnecessary medical imaging can increase an individual's cumulative exposure. Eating plants that contain radioactive elements, living in a building made of stone, and exposure to nuclear power plant emissions can also result in ionizing radiation exposure, but these sources are generally less significant than medical X-rays for most individuals.
Therefore, the greatest exposure to human made ionizing radiation for most individuals is through medical X-rays. Hence the correct answer is option b.
The level of radiation exposure also depends on a variety of factors, such as the type of radiation, the duration of exposure, and the distance from the source. To minimize the risk of radiation exposure, it is important to use medical imaging only when necessary, follow appropriate safety procedures in radiation-related occupations, and limit exposure to other sources of ionizing radiation when possible.
To know more on electromagnetic radiation
https://brainly.com/question/10759891
#SPJ4
An element becomes a positively charged ion when itloses protons.loses electrons.gains electrons.gains neutrons.
Answer:
An element becomes a positively charged ion when it losses electron.
Explanation:
Charged material experiences a force when it is exposed to an electromagnetic field due to the physical property of electric charge. You can have a positive or negative electric charge (commonly carried by protons and electrons respectively). Unlike charges attract one another while like charges repel one another. Neutral refers to an object that carries no net charge.
Electric charge is a conserved attribute, meaning that the net charge—that is, the sum of the positive and negative charges in an isolated system—cannot change. Subatomic particles carry an electric charge. In the nuclei of atoms, protons have positive charge and electrons carry negative charge in normal matter.
So, an element becomes a positively charged ion when it loses negative charge, that is, electron.
the greater the temperature difference between two heat reservoirs group of answer choices the greater their heights. the less work can be done. the more work can be done. the more water can flow.
The greater the temperature difference between two heat reservoirs, the more work can be done.
This is because heat naturally flows from hotter to cooler objects, so a larger temperature difference means there is more heat available to be converted into work. The height of the reservoirs is not directly related to the amount of work that can be done. The term "reservoirs" refers to the sources of heat, which can be anything from a power plant to the sun. This is due to the fact that heat naturally flows from a high-temperature region to a low-temperature region. With a larger temperature difference, this flow of heat is more significant, enabling more work to be done by the system.
learn more about temperature Refer: https://brainly.com/question/4160783
#SPJ11
1) If we could see our own galaxy from 2 million light-years away, it would appear
A) as a flattened disk with a central bulge and spiral arms.
B) as a faintly glowing band of light stretching all the way around the sky.
C) to fill the sky with widely spaced stars.
D) like a single, dim star.
A) If we could see our own galaxy from 2 million light-years away, it would appear as a flattened disk with a central bulge and spiral arms.
This is because our galaxy, the Milky Way, has a spiral structure with a central bulge surrounded by a disk containing the spiral arms. The stars, gas, and dust within these arms emit light, making the galaxy visible as a flattened disk with a central bulge and spiral arms from a distance.From a distance of 2 million light years, it would appear as a flattened disk with a central bulge and spiral arms. This structure is visible from Earth, but from a distant perspective it would be difficult to see any individual stars.
learn more about galaxy Refer: https://brainly.com/question/31361315
#SPJ11
Question 6
Which one of the following sources of noise has been declining slightly in recent years?
a. motorcycle
b. automobile
c. aircraft
d. industrial
the source of noise that has been declining slightly in recent years is the automobile. This is due to the implementation of noise regulations and the development of more efficient and quieter engines.
Answer - 1. Technical evolution of motor vehicles and progress in reducing their noise.
2. Population and urbanisation trends.
3. Economic trends and trends in motor vehicle ownership.
4. Traffic trends, particularly in urban areas.
5. Changes in legislation.
To learn more about the noise pollution -
brainly.com/question/21849543
#SPJ11
2) What is the thickness of the disk of the Milky Way? A) 100 light-years B) 1,000 light-years C) 10,000 light-years D) 100,000 light-years E) 1,000,000 light-years
The thickness of the disk of the Milky Way is approximately 1,000 light-years. This thickness varies somewhat depending on the method used to measure it, as the disk is not perfectly flat and uniform.
The disk is a flat, pancake-shaped structure that contains most of the stars, gas, and dust in the galaxy. The thickness of the disk varies somewhat across its diameter, but it is generally around 1,000 light-years thick. This means that the distance from the top of the disk to the bottom is about 1,000 light-years. The thickness of the disk is important because it affects the way stars and other objects move within the galaxy. The thickness of the disk is also related to the rate at which new stars are formed, as gas and dust in the disk collapse and coalesce to form new stars. Understanding the structure and thickness of the Milky Way's disk is an important part of understanding the galaxy as a whole.
To learn more about Milky Way, refer:-
https://brainly.com/question/30714548
#SPJ11
For the Rockwell Hardness tester, what is the minor load that is usually applied to the indenter?
The minor load that is usually applied to the indenter in the Rockwell Hardness test is 10 kgf (kilogram-force).
The Rockwell Hardness test is a popular method used to measure the hardness of metals and other materials. It measures the depth of indentation made by an indenter under a specific load, and is expressed as a hardness number.
The Rockwell test uses two loads: a minor load and a major load. The minor load is applied first to set the position of the indenter, and is usually 10 kgf. The major load is then applied to make the indentation, and can vary depending on the hardness of the material being tested.
After the major load is removed, the depth of the indentation is measured using a dial gauge or other instrument, and the Rockwell hardness number is determined based on the difference between the depth of the indentation with the major load and the depth of the indentation with the minor load.
For more question on indenter click on
https://brainly.com/question/30465430
#SPJ11
If the air temperature remains constant, evaporating water into the air will ________ the dew point and ________ the relative humidity.
-increase, decrease
-decrease, increase
-decrease, decrease
-not change, increase
-increase, increase
If the air temperature remains constant, evaporating water into the air will increase the dew point and decrease the relative humidity. The dew point is the temperature at which the air becomes saturated with water vapor and condensation begins to form.
Relative humidity is the ratio of the amount of water vapor in the air to the maximum amount of water vapor the air can hold at a given temperature and pressure.
When water evaporates into the air, it increases the amount of water vapor in the air. This increase in water vapor content causes the dew point to increase since more water vapor is required to saturate the air. In other words, the air can hold more water vapor before reaching saturation.
At the same time, the increase in water vapor content from evaporation can cause the relative humidity to decrease, since the amount of water vapor in the air is increasing without an increase in the maximum capacity for water vapor at that temperature. This means that the air is becoming less saturated since the ratio of water vapor in the air to the maximum amount it can hold is decreasing.
Overall, the increase in dew point and decrease in relative humidity from evaporating water into the air can have important effects on weather patterns and human comfort and are important factors to consider in a variety of fields, from meteorology to agriculture to building design.
Find out more about air temperature
brainly.com/question/31480624
#SPJ11
Question 100
Leaching from a garbage dump has been found to pollute wells
a. 2000 feet away
b. 1400 feet away
c. 100 feet away
d. 50 feet away
Leaching from a garbage dump can cause groundwater pollution, which can contaminate wells and threaten human health. In this case, the answer is (c) 100 feet away,
The distance at which wells can be affected by pollution depends on various factors, such as the type and amount of waste, the permeability of soil and the depth of the groundwater table. In this case, the answer is (c) 100 feet away, which means that the contamination has spread relatively close to the dump site. This highlights the importance of proper waste management practices to prevent groundwater pollution and protect public health.
Learn more about Leaching
https://brainly.com/question/2373295
#SPJ4
the speed of sound increases by about 0.4 m/s for each degree celsius when the air temperature rises. for a given sound, as the temperature increases, what happens to the wavelength?
As the temperature of the air increases, the speed of sound also increases.
This is because warmer air molecules move faster and collide with each other more frequently, which makes sound waves travel faster through the medium.
According to the given information, the speed of sound increases by about 0.4 m/s for each degree Celsius of temperature rise.
The wavelength of a sound wave is directly proportional to the speed of sound in the medium. This means that as the speed of sound increases, the wavelength of the sound wave also increases.
The relationship between the two is described by the formula:
wavelength = speed of sound / frequency
Since the frequency of the sound wave remains constant, an increase in the speed of sound due to a rise in temperature will result in an increase in the wavelength of the sound wave.
Therefore, as the air temperature increases, the wavelength of the sound wave also increases.
It is worth noting that the effect of temperature on sound waves is more significant for high-frequency sounds, such as those produced by musical instruments or human speech.
This is because high-frequency sounds have shorter wavelengths and are more strongly influenced by changes in the speed of sound. In summary, as the air temperature rises, the speed of sound increases, resulting in an increase in the wavelength of the sound wave.
To know more about temperature of the air here
https://brainly.com/question/26706491
#SPJ11
The wavelength of a particular sound decreases as air temperature increases.
This is due to the fact that while the frequency of sound fluctuates with temperature, the speed does not. Since speed equals frequency times wavelength, the equation must hold if speed increases while the frequency remains constant. In other words, since the speed has increased, the same number of waves will pass a location in less time, hence the wavelength must be smaller to make up for it. In disciplines like acoustics and meteorology, this phenomenon—known as the dependence of the speed of sound on temperature—must be taken into account.
learn more about wavelength here:
https://brainly.com/question/13533093
#SPJ11
Question 49
The major target for damage associated with ultraviolet radiation is:
a. Cellular DNA
b. The skin
c. The eyes
d. The liver
Cellular DNA is the main component of UV radiation damage.
The sun emits ultraviolet (UV) radiation, a form of electromagnetic radiation that can harm living tissues. Cellular DNA, which is particularly susceptible to the effects of UV radiation, is the main target for this damage. The creation of thymine dimers, which can obstruct DNA replication and transcription, is one type of damage that can result from UV light absorption by DNA. This might result in mutations that eventually cause cancer or other disorders. In addition, UV radiation can harm the skin and eyes, but cellular DNA is the area where it has the greatest long-term effect.
learn more about UV radiation here:
https://brainly.com/question/13849635
#SPJ11
the chemical that makes up genetic material
The chemical that makes up genetic material is called nucleic acid. Specifically, DNA deoxyribonucleic acid and RNA ribonucleic acid are the two types of nucleic acids that store and transmit genetic information in living organisms.
What are acids ?Acids are substances that have a pH less than 7 and can donate a hydrogen ion (H+) to a solution. They are characterized by their sour taste and their ability to dissolve metals, react with bases, and change the color of indicators. Acids can be categorized as strong or weak based on their ability to ionize in water. Strong acids ionize completely in water, while weak acids only partially ionize.
What is an ionize ?Ionization refers to the process of converting a neutral atom or molecule into an ion by adding or removing one or more electrons. This can occur through a variety of methods, such as heating, chemical reactions, or exposure to radiation. When an atom loses one or more electrons, it becomes positively charged and is called a cation.
To know more about ionize visit :
https://brainly.com/question/28385102
#SPJ1
Friction is a force that resists the relative motion of two objects in contact.
Why is the speciality of putting the word relative motion without putting motion
Answer:
Explanation:
Friction is a force that opposes the motion or potential motion of two items that come into contact. The word "relative motion" emphasizes that friction resists the motion of the objects with respect to one other, and it emphasizes that friction specifically operates against the motion or potential motion between two objects in contact.
Ectotherms can breathe ______ because their _____ metabolic rate allows them to cope with the low ______ availability.A) air; low; CO2B) water; high; CO2C) water; low; O2D) air; high; O2
Ectotherms can breathe air because their high metabolic rate allows them to cope with the low oxygen availability in their environment. Therefore, option D is the correct answer.
Ectotherms are organisms that rely on external sources of heat to regulate their body temperature. They have a low metabolic rate, which means that they require less energy and oxygen to maintain their bodily functions compared to endotherms (organisms that can internally regulate their body temperature).
Ectotherms can breathe C) water because their low metabolic rate allows them to cope with the low O2 availability.
To know more about Ectotherms click here.
#SPJ11
a coil is placed next to a straight wire. the current in the wire is as shown in the diagram below. the coil and wire lie in the same plane with the z axis perpendicular to the plane of the coil. (a) as the current in the wire increases, find the direction of the induced current in the coil by answering the following questions. (i) what is the direction of the magnetic field due to the current carrying wire in the center of the coil? ---select--- (ii) as the current in the wire increases, how will the magnetic flux in the coil change? ---select--- (iii) what is the direction of the induced magnetic flux in the coil? ---select--- (iv) what is the direction of the induced current in the coil? ---select---
The magnetic field produced by the current-carrying wire at the coil's centre is directed into or away from the coil and perpendicular to its plane.
The magnetic flux through the coil grows as the wire's current increases. The magnetic field produced by the coil's induced magnetic flux opposes the change that caused it, counteracting the wire's growing magnetic field.
Thus, in accordance with Lenz's law, the induced current in the coil moves in a direction that opposes the rise in the magnetic field of the wire in an effort to keep the system in balance.
For more details regarding magnetic field visit:
https://brainly.com/question/14848188
#SPJ12
A bungee jumper dives from a bridge. At a point near the bottom of his dive, the forces acting on him are:gravity: 700 N downwardsspring force: 850 N upwardsair resistance: 60 N upwardsShowing your working, calculate:the net force (strength and direction) acting on himhis acceleration, given that his mass is 70 kg
A bungee jumper dives from a bridge. At a point near the bottom of his dive, the forces acting on him are:gravity: 700 N downwardsspring force: 850 N upwardsair resistance: 60 N upwardsShowing your working,The acceleration of the bungee jumper is 3 m/s^2 downwards.
To calculate the net force, we need to add up all the forces acting on the bungee jumper. In this case, the gravitational force is acting downwards with a magnitude of 700 N, the spring force is acting upwards with a magnitude of 850 N, and the air resistance is also acting upwards with a magnitude of 60 N.
Therefore, the net force acting on the bungee jumper can be calculated as follows:
Net force = spring force + air resistance - gravitational force
Net force = 850 N + 60 N - 700 N
Net force = 210 N upwards
Therefore, the net force acting on the bungee jumper is 210 N upwards.
To calculate the acceleration of the bungee jumper, we can use Newton's second law of motion, which states that the net force acting on an object is equal to its mass multiplied by its acceleration.
Net force = mass x acceleration
Substituting the values, we get:
210 N = 70 kg x acceleration
Solving for acceleration, we get:
Acceleration = 210 N / 70 kg
Acceleration = 3 m/s^2 downwards
Therefore, the acceleration of the bungee jumper is 3 m/s^2 downwards.
learn more about force here
https://brainly.com/question/11400066
#SPJ11
What do you think could happen if your epiglottis malfunctions?
The epiglottis acts as a small, moveable "lid" that lies close to the throat & stops liquids and food against entering the windpipe. Epiglottis edoema might totally restrict the airway. This can result in difficulty breathing or failure of respiration.
What leads to the covering of the throat to fail?Epiglottitis usually occurs by a bacterial infection of H. influenzae type b (Hib). Hib can induce a variety of dangerous diseases, including pneumonia and meningitis, in addition to epiglottitis.
Is it possible to injure the epiglottis?Any epiglottis injury can impair an individual's capacity to eat, communicate, and possibly breath effectively. The epiglottis can be damaged for a variety of reasons, including malignancy, injury, and infection. In such circumstances, surgical reconstruction can be used to repair the epiglottis.
To know more about liquids visit:
https://brainly.com/question/9716973
#SPJ1
12) All the following types of objects are found almost exclusively in the disk (rather than the halo) of the Milky Way except A) young stars.
B) globular clusters.
C) X-ray binaries.
D) high-mass, red supergiant stars.
B) Globular clusters. Globular clusters are found almost exclusively in the halo of the Milky Way, rather than the disk.
The other objects mentioned, such as young stars, X-ray binaries, and high-mass red supergiant stars, are typically found in the disk of the Milky Way. Globular clusters are ancient, densely packed collections of stars that are typically found in galactic halos, rather than in the disks of galaxies. They are composed of some of the oldest stars in the universe, and are typically found in the halo regions of galaxies. X-ray binaries, high-mass, red supergiant stars, and young stars, on the other hand, are all typically found in the disks of galaxies, rather than in their halos.
learn more about Globular clusters Refer: https://brainly.com/question/15087030
#SPJ11
how fast in seconds can the 149 a current through a 0.350 h inductor be shut off if the induced emf cannot exceed 74.0 v?
The 149 A current through the 0.350 H inductor can be shut off in about 0.704 seconds without exceeding the induced emf limit of 74.0 V.
We can use the formula:
ε = -L (dI/dt)
where ε is the induced emf, L is the inductance, and dI/dt is the rate of change of current. The negative sign indicates that the induced emf opposes the change in current.
We want to find the maximum rate at which the current can be shut off without exceeding the induced emf limit of 74.0 V.
Rearranging the formula and solving for dI/dt, we get:
dI/dt = -ε / L
Substituting the given values, we get:
dI/dt = -74.0 V / 0.350 H = -211.4 A/s
This means that the current through the inductor can be decreased at a maximum rate of 211.4 A/s without exceeding the induced emf limit of 74.0 V.
To find the time it takes to shut off the current completely, we can use the formula:
t = ΔI / (dI/dt)
where ΔI is the change in current. In this case, ΔI = 149 A (the initial current) - 0 A (the final current) = 149 A. Substituting the values, we get:
t = 149 A / 211.4 A/s = 0.704 s
Therefore, the 149 A current through the 0.350 H inductor can be shut off in about 0.704 seconds without exceeding the induced emf limit of 74.0 V.
To know more about inductance visit :
https://brainly.com/question/25484149
#SPJ11
order for our moon
When the moon first formed, it was only 14,000 above the Earth's surface outside f
Roche limit. It took only to 100
to form.
When the moon first formed, it was only 14,000 miles above the Earth's surface outside the Roche limit.
The distance between two celestial bodies which are held together with the force of gravity between them, is called the Roche limit or Roche radius.
The order for our moon is that,
When the moon first formed, it was only 14,000 miles above the Earth's surface outside the Roche limit.
It took only to 100 years to form.
To learn more about Roche limit, click:
https://brainly.com/question/30788789
#SPJ1
Which describes how the spring constant affects the potential energy of an object for a given displacement from an
equilibrium position?
O The higher the spring constant, the greater the gravitational potential energy.
O The lower the spring constant, the greater the gravitational potential energy.
O The higher the spring constant, the greater the elastic potential energy.
O The lower the spring constant, the greater the elastic potential energy.
Answer: C.
Explanation:
The higher the spring constant, the greater the elastic potential energy.
When we jump, our gravitational force pulls on the Earth and the Earth’s gravity pulls on us. Does the Earth get pulled up to meet us or do we get pulled down to the Earth? Explain your answer.
When we jump, our gravitational force does indeed pull on the Earth, just as the Earth's gravity pulls on us. However, the effect of our gravitational pull on the Earth is extremely small compared to the Earth's mass and gravitational pull on us.
What is Gravitational Force?
Gravitational force, also known as gravity, is a fundamental force of nature that causes objects with mass to be attracted towards each other. It is the force that gives weight to physical objects and governs the motion of celestial bodies, such as planets, stars, and galaxies. Gravitational force is described by Newton's law of universal gravitation.
According to Newton's law of universal gravitation, every object with mass exerts a gravitational force on every other object with mass. The magnitude of this gravitational force depends on the masses of the objects and the distance between them.
Learn more about Gravitational Force from the given link
https://brainly.com/question/27943482
#SPJ1
As a roller coaster travels down a hill, it accelerates at a rate of 7 m/s. If its speed at the top of the hill is 3 m/s what is its speed after 4 seconds
The speed of the roller coaster after 4 seconds will be 31[tex]\sf{ms^{-1}}[/tex]
We know that,
[tex]\larger{\bf{\boxed{\boxed{v = u + at}}}}[/tex]
where,
v = final velocity u = initial velocity = 3 [tex]\sf{ms^{-1}}[/tex]a = acceleration = 7 [tex]\sf{ms^{-2}}[/tex]t = time = 4 seconsAfter putting all values
[tex]\implies{\sf{v = 3 + (7 \times 4)}} \\ \implies{\sf{v = 3 + 28}} \\ \bf{\implies{v = 31 \ ms^{-1}}}[/tex]
Learn more on :
https://brainly.com/question/14344386https://brainly.com/question/24905073The magnetic field at the center of a circular coil of wire with N0 turns and radius R0 and carrying current I0 can be doubled by:
The magnetic field at the center of a circular coil can be doubled by either doubling the number of turns (No) to 2No or doubling the current ([tex]I_{0}[/tex]) to 2[tex]I_{0}[/tex].
The magnetic field at the center of a circular coil is given by the formula B = (μ0 * No * [tex]I_{0}[/tex]) / (2 * [tex]R_{0}[/tex]), where μ0 is the permeability of free space. To double the magnetic field, we need to increase the numerator of the formula by a factor of 2. This can be achieved by either increasing the number of turns No or the current [tex]I_{0}[/tex]. Alternatively, we can decrease the radius [tex]R_{0}[/tex] by a factor of √2, since the magnetic field is inversely proportional to the radius. Therefore, the magnetic field at the center of a circular coil can be doubled by increasing the number of turns or the current, or by decreasing the radius by a factor of √2.
Learn more about permeability here: https://brainly.com/question/1023696
#SPJ11
Question 42 Marks: 1 Beta particles can be stopped by a few millimeters of aluminum.Choose one answer. a. True b. False
a. True. Beta particles are high-energy electrons or positrons that can be stopped by thin layers of materials such as aluminum, which can block them after a few millimeters.
Beta particles, which are high-energy electrons emitted from some radioactive elements, can be blocked by a few millimeters of aluminum. Aluminum is an effective shield because of its high atomic number and because it is a good conductor of electricity. The aluminum absorbs the beta particle, preventing it from traveling any further. In addition, because aluminum is a good conductor of electricity, it helps to dissipate the energy of the beta particle, diminishing its power.
To learn more about beta particles click here https://brainly.com/question/3580345
#SPJ11
20. A 0.254-m diameter circular saw blade rotates at a constant angular speed of 117 rad/s. What is the tangential speed of the tip of a saw tooth at the edge of the blade?
A) 29.7 m/s
B) 14.9 m/s
C) 9.46 m/s
D) 7.45 m/s
E) 2.17 m/s
The tangential speed of the tip of a saw tooth at the edge of the blade is 14.9 m/s.
To find the tangential speed of the tip of a saw tooth at the edge of the blade, we can use the following formula:
tangential speed = radius x angular speed
The radius of the circular saw blade is half of its diameter, which is 0.254/2 = 0.127 m. The angular speed is given as 117 rad/s. Thus, we can calculate the tangential speed as:
tangential speed = 0.127 m x 117 rad/s = 14.859 m/s
Rounding to two significant figures, we get the answer as 14.9 m/s, which is option B. Therefore, the tangential speed of the tip of a saw tooth at the edge of the blade is 14.9 m/s.
learn more about tangential speed Refer: https://brainly.com/question/17446849
#SPJ11
7. During the spin-dry cycle of a washing machine, the motor slows from 90 rad/s to 30 rad/s while the turning the drum through an angle of 180 radians. What is the magnitude of the angular acceleration of the motor?
A) 64 rad/s2
B) 32 rad/s2
C) 10 rad/s2
D) 20 rad/s2
E) 1.0 rad/s2
20 rad/s^2 is the magnitude of the angular acceleration of the motor.
To find the angular acceleration of the motor, we need to use the formula:
angular acceleration = (final angular velocity - initial angular velocity) / time
In this case, we are given the initial and final angular velocities, but we don't know the time it takes for the motor to slow down. However, we do know the angle through which the drum turns during this time.
We can use the formula:
angle = (1/2) * angular acceleration * time^2
Rearranging this formula to solve for time, we get:
time = sqrt(2 * angle / angular acceleration)
Substituting the given values, we get:
180 = (1/2) * angular acceleration * (sqrt(2 * 180 / angular acceleration))^2
Simplifying:
180 = angular acceleration * 2 * 180 / angular acceleration
180 = 360
This is not possible, so we made a mistake somewhere. Let's try another approach.
We can use the formula:
final angular velocity^2 = initial angular velocity^2 + 2 * angular acceleration * angle
Substituting the given values, we get:
30^2 = 90^2 + 2 * angular acceleration * 180
Simplifying:
900 - 8100 = 360 * angular acceleration
-7200 = 360 * angular acceleration
angular acceleration = -20 rad/s^2
This answer is negative, which means that the motor is decelerating. To get the magnitude of the angular acceleration, we need to take the absolute value:
magnitude of angular acceleration = |-20| = 20 rad/s^2
Therefore, the correct answer is D) 20 rad/s^2.
learn more about magnitude here
https://brainly.com/question/3371255
#SPJ11
Question 19 Marks: 1 One piece of refuse-compaction and earth-moving equipment is needed at the landfill site for approximately eachChoose one answer. a. 40 loads per day b. 60 loads per day c. 80 loads per day d. 100 loads per day
One piece of refuse-compaction and earth-moving equipment is needed at the landfill site for approximately each 80 loads per day. So the correct answer is c.
This means that based on the specific conditions or requirements of the landfill site in question, it is estimated that one piece of refuse-compaction and earth-moving equipment would be needed to handle approximately 80 loads of refuse per day. This information may be based on factors such as the volume of waste generated, the efficiency of the equipment, the capacity of the landfill site, and other operational considerations.
It's important to note that the actual number of loads per day that would require equipment may vary depending on various factors and site-specific conditions. The given answer is an estimate and may not be universally applicable to all landfill sites or situations.
To know more about landfill ,
https://brainly.com/question/16924501
#SPJ11
in wikipedia, look up cold front, read the intro then scroll down to development of cold fronts, and answer this question: happens when mass of colder air move into where warmer air is present?
When a mass of colder air moves into where warmer air is present, it creates a boundary known as a cold front. This results in the warmer air being lifted upwards, which can lead to the formation of clouds and precipitation.
The development of a cold front is a key aspect of weather patterns and can impact temperature, humidity, and atmospheric pressure. This information can be found on the Wikipedia page for Cold Front under the section titled "Development of Cold Fronts".
When a mass of colder air moves into an area where warmer air is present, a cold front develops. The colder air, being denser, slides under the warmer air and lifts it. This process often results in the formation of clouds and precipitation as the warmer air is forced to rise, cool, and condense. The movement of the cold front can also cause a noticeable drop in temperature and changes in wind direction.
To know more about Mass click here .
brainly.com/question/19694949
#SPJ11