A student gathered two boxes of the same size made of different materials: glass and clear plastic. She placed them on a windowsill in the sun for an hour, and then measured the temperature of the air in each box. What is the temperature of the air in this experiment

Because of the Doppler effect, a light- or sound-emitting object moving toward you has a lower amplitude compared to a stationary object.

The Doppler effect is generally defined as the shift in wave frequency (whether it be sound or light) caused by relative motion between the wave source and the observer. Every time a source wave moves in reference to the observer, this effect can be seen.

The Doppler effect allows astronomers to determine the frequency of light waves as an object moves in relation to the observer. As it approaches you, the frequency decreases and the item exhibits a blueshift. A redshift indicates that an item is travelling away from us.

To know more about Doppler effect

https://brainly.com/question/13229185

#SPJ4

The time it takes for the mass to reach the new equilibrium position is approximately 0.15 seconds.

To calculate the time it takes for the mass to reach the new equilibrium position, you will need to know the spring constant of the spring. The spring constant, denoted by the letter k, is a measure of the spring's stiffness, and it is related to the force required to stretch the spring by a certain distance. If the spring constant is not given, it can not be calculated.

Once you have the spring constant, you can use the equation:

T = 2π √(m/k) where,

The spring constant (k) can be found by using the equation:

F = kx where,

In this case, the force is equal to the weight of the mass, which is m*g, where m is the mass and g is the acceleration due to gravity.

mg = kx

or, k = (m*g)/x

or, k = (1.65 kg * 9.8 m/s^2) / 0.215 m = 74.65 kg/s^2

Now that we know the spring constant, we can use the equation:

T = 2π √(m/k)

To find the time it takes for the mass to reach the new equilibrium position, where T is the period of oscillation, m is the mass of the object attached to the spring, and k is the spring constant.

T = 2π √(1.65 kg / 74.65 kg/s^2) = 0.15 sec

So the time it takes for the mass to reach the new equilibrium position is approximately 0.15 seconds.

Learn more about Hook's law here:

https://brainly.com/question/2648431

#SPJ4

Answer:

The potential energy can be increased by increasing the mass of the object, by varying the distance between the two objects, decreasing the kinetic energy of the molecules, by freezing, by compressing or stretching, and so on.

Explanation:

Hope this helped !

Static stretches are those in which you remain in a single position—standing, sitting, or lying still—for up to 45 seconds. Dynamic stretches are regulated motions that get your ligaments, muscles.

Movement is included into dynamic stretches, such as lunges with a torso twist. As opposed to dynamic stretches, static stretches include holding a stretched position for a while. Stretches that are static include the triceps stretch and the butterfly stretch.

A swimmer might, for instance, circle their arms before entering the water. A series of movements to get the body moving before engaging in any kind of exercise can also be considered dynamic stretches.

To learn more about flexibility visit:

brainly.com/question/2645707

#SPJ4

Answer:

3 km displacement

Explanation:

I'm pretty sure that's the answer, I'm so sorry if it's not

Due to the surface makeup and the product that spilled, Downhill/Downwind is the direction most hazardous materials will spread based on their viscosity.

The viscosity of a fluid (liquid or gas) is its resistance to a change in form or movement of neighbouring sections relative to one another. Viscosity signifies resistance to flow. The SI unit is poiseiulle (PI).

It relates to the colloquial sense of "thickness" in liquids: syrup, for example, has a higher viscosity than water. The strength of the compensatory force is related to the viscosity of the fluid in a tube with a constant rate of flow.

In general, viscosity is affected by the condition of a fluid, such as temperature, pressure, and rate of deformation. However, in certain circumstances, the reliance on some of these features is minor. The viscosity of a Newtonian fluid, for example, does not vary appreciably with the rate of deformation. Only at very low temperatures is zero viscosity (no resistance to shear stress) observed in superfluids; otherwise, the second law of thermodynamics requires all fluids to have positive viscosity.

To learn more about viscosity, here

https://brainly.com/question/13385698

#SPJ4

The film strip that emerges from the camera is usually a Negative. That is, its color and light values are the opposite of those in the original scene.

One of the three camera settings that affects exposure is the aperture. The shutter speed, aperture, and ISO settings are together referred as as the "exposure triangle." By adjusting the relative amount of light entering a camera lens, an aperture can change the exposure.

A camera's shutter can close or open depending on how much light is required to expose the film at the rear of the device.

To know more about camera visit:-

https://brainly.com/question/10944268

#SPJ4

According to the given statement (a) power in this case will be P=38,933.2428 Watts (b) power in this case will be P=91,788.4599\ W

Average power is defined as the work done per unit time.

Work done can be found by change in kinetic energy.

[tex]W=Kf-Ki\\\\=\frac{1}{2}\mathrm{\ }m(Vf)^2-\frac{1}{2}\mathrm{\ }m(Vi)^2\\\\\Rightarrow\frac{m}{2}\left\{(28.4)^2-(0)^2\right\}\\\\=403.28\mathrm{\ }mJ oules.[/tex]

[tex]P=\frac{W}{t}=\frac{403.28\ m}{6.68}=60.37125mWatts.[/tex]

Explanation: Please refer to solution in this step.

a.) mass of the car will bemass [tex]=\frac{\mathrm{\ Weight\ }}{g}=0.644897\times{10}^3Kg[/tex]

using above equation we can find the power, [tex]P=60.37125\left(0.644897\times{10}^3\right)[/tex]

[tex]=38,933.2428 Watts[/tex]

b.) mass of the car will be [tex]=\frac{\mathrm{\ Weight\ }}{g}=0.152040\times{10}^4Kg[/tex]

using above equation we can find

the power, [tex]P=60.37125\left(0.152040\times{10}^4\right)=91,788.4599 Watts[/tex]

To know more about accelerates visit:

https://brainly.com/question/12960024

#SPJ4

Your weight would be 85.7N if the Earth were seven times as massive as it is and had a radius three times that of today since the gravitational pull is reduced by seven times with an increase in radius.

Gravitation is a fundamental interaction in physics that produces attraction between all objects with mass or energy. Of the four fundamental interactions, gravity is by far the weakest, being about ten times less than the strong interaction. A body's mass is a fundamental characteristic. Before the discovery of the atom and the field of particle physics, it was generally thought to be tied to the amount of matter in a physical body. x = 600N/7, x = 85.7N

Learn more about gravitational here

https://brainly.com/question/3009841

#SPJ4

The final velocity of the freight train is 27 m/s that accelerates at a rate of 0.050 m/s2 for 8.0 min, starting with an initial velocity of 3.0 m/s.

Information given:

Acceleration is 0.050 m/s²

Time is 8.0 min

Initial velocity is 3.0 m/s

We apply the resulting equations for rectilinear motion at constant acceleration to this problem.

a = (v - u)/t

where the,

a is acceleration

u and v are the initial and final velocities, respectively

s is the distance

t is the time

Substituting the values in the equation:

The solution is as follows:

a = (v - v₀)/t

0.050 m/s² = (v - 3 m/s)/(8 min * 60 s/1 min)

Time: 480 sec

Solving for v,

24=v-3

v=27 m/s

Learn more about acceleration:

brainly.com/question/28743430

#SPJ4

The energy stored in the capacitor is 0.045 mJ. Under DC conditions, the capacitors will be open-circuited.

Energy stored in a capacitor can be calculated by

E = ½ CV²

Where

The picture of circuit in the attached plot is in the attachment.

Find the energy stored in the capacitor under DC conditions!

We have

Under DC (Direct Current) conditions, the capacitors will be open-circuited. It means that there is no current will flow through the 20 Ω resistor. So, I across the 10 Ω resistor is the same as I source.

See the picture below in the attachment!

The voltage across the 10 Ω resistor is

V = IR

V = 3(10)

V = 30 V

The voltage across the capacitor is the same as the voltage across the 10 Ω resistor.

Vc = V = 30 V

The energy stored would be

E = ½ C Vc²

E = ½ (0.1)(10⁻⁶)(30)²

E = ½ (10⁻⁷)(900)

E = 450 × 10⁻⁷

E = 0.045 × 10⁻³

E = 0.045 mJ

Hence, the energy stored in the capacitor under DC conditions is 0.045 mJ. The correct option is (c).

Learn more about energy stored in the circuit here:

brainly.com/question/14103175

#SPJ4

The magnitude of the net electric field is 2.7 x 10^9 N/C, and the direction is away from the positive charge and towards the negative charge.

The magnitude of the electric field due to the positive charge at the midpoint is:

E = k * q / r^2

E = (9.0 x 10^9 N * m^2/C^2) * (20.0 x 10^-6 C) / (0.20 m)

E = 4.5 x 10^9 N/C

The magnitude of the electric field due to the negative charge at the midpoint is:

E = k * q / r^2

E = (9.0 x 10^9 N * m^2/C^2) * (-8.00 x 10^-6 C) / (0.20 m)

E = -1.8 x 10^9 N/C

The direction of the electric field due to the positive charge is away from the charge, and the direction of the electric field due to the negative charge is towards the charge.

To find the net electric field, we add the vectors of the two electric fields. Since the vectors are in opposite directions, we subtract the negative vector from the positive vector.

E_net = E_positive + E_negative

E_net = (4.5 x 10^9 N/C) + (-1.8 x 10^9 N/C)

E_net = 2.7 x 10^9 N/C

The magnitude of the net electric field is 2.7 x 10^9 N/C, and the direction is away from the positive charge and towards the negative charge.

Learn more about the magnitude of the net electric field here: https://brainly.com/question/29679588

#SPJ4

The difference between static stretching and passive stretching is that static stretching is done independently by moving the body, while passive stretching is done using outside assistance.

Stretching is the activity of carrying out movements aimed at flexing or relaxing stiff body parts. Stretching is done to avoid muscle injury because it has benefits such as flexibility, range of motion, circulation, and range of motion of the joints.

There are several types of stretching to relax the body, two of which are static stretching and passive stretching. Static stretching is a movement that is done slowly on the muscles until there is tension and pain. While passive stretching is stretching that is done with outside help such as using a tool or asking for help from others to relax and flex certain muscle parts. So the difference between the two stretches is that static stretching is done independently by moving the body itself, while passive stretching is done using outside help.

Learn more about static stretching at:

https://brainly.com/question/1543747

#SPJ4

Latency problems can be prevented by not downloading multiple items at a time, not running multiple applications simultaneously, scanning for viruses, and not deleting the cache.

One of the principal causes of network latency is distance, specifically the distance between client devices making requests and the servers responding to those requests. Customers demand to communicate with technology in real time without any delays, hence low latency is essential. Users may stop using a platform altogether and switch to another application permanently if there are problems with severe latency and time delays.

In milliseconds, latency reveals the strength of your connection within your network. For gaming, anything with a latency of 100ms or less is fine. However, the ideal range is 20–40 ms.

To learn more about latency visit:

brainly.com/question/14894222

#SPJ4

The length of the diagonal member is 20 ft, and if its modulus of elasticity is 30,000,000 psi. If the strain in the diagonal member is measured as 0. 001200 in, the elongation of the member is 29 inches.

A truss is constructed of a number of components, such as beams, connected at nodes to create a rigid framework. According to engineering definition, a truss is a structure that "consists of merely two-force members, where the members are placed so that the assembly as a whole behaves as a single entity."

A truss is a piece of furniture comprised of components arranged into linked triangles that function as a single unit. Trusses are most typically used in towers, roofs, and bridges. If a truss' members essentially lie on a single plane, it is referred to as a plane truss.

To learn more about truss visit:

brainly.com/question/16757156

#SPJ4

The first one is based on the fundamental definition of velocity that employs the widely used velocity equation.

The second approach determines the amount of velocity change brought on by acceleration over a given period of time.

Finally, the average velocity formula is used in the third section of the velocity calculator, which may be helpful if you need to examine trips with varying speeds across different distances.

According to the definition of velocity, it is the rate at which an object's position changes over time. Consideration of body motion is one of the fundamental ideas in classical mechanics.

Therefore, The first one is based on the fundamental definition of velocity that employs the widely used velocity equation.

To learn more about Velocity, refer to the link:

https://brainly.com/question/18084516

#SPJ1

The work that would have been done if a lever would have been used with an effort arm of 12 meters and a load arm of 6 meters is 50 J.

option A is the correct answer.

A lever is a simple machine that makes work easier and faster. When a lever is used, a small effort will be used to overcome a large load.

The efficiency of a machine increases when the output force is greater than the input force.

Mathematically, the formula for the efficiency of a machine is given as;

Eff = ( output force / input force ) x 100 %

The output force is given by the following formula;

F ( out ) = load x distance moved by load

The input force is given by the following formula;

F ( input ) = effort x distance moved by effort

The work that would have been done if a lever would have been used with an effort arm of 12 meters and a load arm of 6 meters is calculated as;

work = ( 600   x 6  ) / ( 12  x 6  )

work = 50 J

Learn more about lever here: https://brainly.com/question/416386

#SPJ1

Answer:

600 J

Explanation:

The work is not equal to the initial work divided by the effort arm.

The coefficient of static friction between the crate and the floor is calculated to be 0.275.

The frictional force when an object moves on the horizontal surface is given as,

Ff = μ N

where, N is the normal force

μ is the coefficient of static or kinematic friction

If no forces other then the weight and the normal are acting upon the y-direction, then the weight and the normal force are equal in magnitude.

N = W = m g

Given that,

Mass of the crate = 26 kg

Frictional force Ff = 70 N

Weight of the crate = 26 × 9.8 = 254.8 N

The normal force is 254.8 N.

The coefficient of static friction μ = Ff /N = 70/254.8 = 0.275

Thus, the coefficient of static friction between the crate and the floor is 0.275.

To know more about friction:

https://brainly.com/question/20162979

#SPJ4

Answer:Now this question can go ways

Explanation:

1: YES= Because they have super advanced technology and the aliens could fly to earth steal our resources and then experiment on the dinosaurs.

2:NO they did not have enough tech yet to support that much length and they just never look or find earth

ME PERSONALLY I WOULD CHOOSE 1 but, up to you

The four major forces acting on the sled and the free-body diagram of the 4 major forces acting on the sled is attached below:

In physics and engineering, a free body diagram (FBD; also called a force diagram) is a graphical representation used to visualize the forces, moments, and resulting reactions applied to a body in a given state. expression. It represents a body or connected bodies that includes all applied forces, moments, and reactions acting on the body. A body can consist of several internal elements (such as a truss), or it can be a compact body (such as a beam). A series of free-body and other diagrams may be required to solve complex problems. A free body diagram consists of:

To know more about free body diagram, visit:

https://brainly.com/question/24087893

#SPJ1

Approximately 27% of everything in the universe is dark matter, with dark energy making up 68%. This means that all the visible matter we can see, including galaxies, stars and planets, only represents 5% of everything that exists.

The matter of the universe is a complex and ongoing question that scientists are still working to answer. Generally, it is believed that the universe is composed of dark matter, dark energy, and ordinary matter.

Dark energy is thought to be the energy that is causing the universe to expand, while dark matter is an unseen form of matter that is believed to make up about 27% of the universe. Ordinary matter is the form of matter that makes up:

Learn more about the matter of the universe:

https://brainly.com/question/4078206

#SPJ4

A negatively charged object is one that has more electrons than protons.

A negative charge is present when an object has more electrons than protons. An atom has a positive charge when there are more protons than electrons in it. The charges of protons are positive while those of electrons are negative. The coulomb is used to measure charge (C).

The opposite of a charge's attraction is the opposite of its repellency. Therefore, a positive charge attracts a negative charge, whereas two negative charges repel one another. Along the boundary between the two charges, attraction or repulsion occurs.

Along the line that connects the centres of the two objects, the force is applied in that direction. Coulomb's law results in a negative value if the two charges have opposing signs. As a result, the force separating the particles is an attractive force.Coulomb's law produces a favourable outcome if the two charges have the same signs.

Therefore, the answer is 12.4 c positive.

To learn more about negative charges refer to:

https://brainly.com/question/24745720

#SPJ1

Two objects with negative charges of 6.2 nC (Coulomb) each are separated by 0.3 m. the size and direction of the force between the two charges is 3.8387038*10^12 N and toward left.

Solution:

Given :

Two objects with negative charges of 6.2 nC (nano coulomb ) each.

Separation= 0.3 m.

We will use the following Coulomb’s Law.

F = k*|q1| |q2|/r2             ∵ where k = 8.9876 × 109 N·m2

Putting the values, we get

F = 8.9876 × 109*|6.2| |6.2|/0.3^2

F=3.8387038*10^12 N

To know more about coulomb visit

https://brainly.com/question/16222732

#SPJ1

The ambulance weighs 16.97 tons, and the kinetic energy of an object is given by the formula KE = 1/2mv2, where m is the object's mass, v is its velocity, and KE is the kinetic energy.

To learn more about kinetic energy refer:

brainly.com/question/8101588

#SPJ4

Answer: The length of the pendulum is approximately 2.495 meters.

Explanation:

The period of a simple pendulum is the time it takes for the pendulum to swing back and forth through one full oscillation. The period of a simple pendulum is related to the length of the pendulum and the acceleration due to gravity (g) by the formula:

Period = 2 * pi * sqrt(length / g)

In this case, you are given that the period of the pendulum is 3 seconds and the value of g is 9.98 ms-2. You can use these values to solve for the length of the pendulum using the formula above.

Substituting in the values given, you get:

3 = 2 * pi * sqrt(length / 9.98)

Solving for length, you get:

length = (3 / (2 * pi))^2 * 9.98

= 0.5^2 * 9.98

= 0.25 * 9.98

= 2.495

Therefore, the length of the pendulum is approximately 2.495 meters.

A dedicated PV system circuit breaker, suitable for backfeed and positioned at the opposite end of the bus from the main circuit breaker, is a requirement of NEC 705.12(B).

A completed circular conduit through which electricity flows is known as a circuit in electronics. A simple circuit includes a current provider, conductors, and a load. The term "circuit" can broadly be used to describe any ongoing path via which electricity, information, or a signal might go.

A channel for the transfer of electric current is known as an electric circuit. Electric energy is transferred to components that transform it into various types of energy that can perform work, such as supplying power to light, appliances, and other devices, when electrical current flows across a circuit.

To know more about Circuit visit :

brainly.com/question/27206933

#SPJ4

The energy transferred to the system is equal to the work done. For the endothermic process work done is negative. The power of the system is the product of work and time. Hence, the power is 315000 watt.

Endothermic reactions are those which absorbs energy into the system. Thus the surrounding temperature gets decreased.

The calorimetric equation connecting the heat transferred q, with the specific heat, mass and temperature difference is  written as:

q = m c ΔT

Here, the heat energy transferred is equal to the work done on the system. Hence W = - 1050 J

Power of the system is the product of work done and time taken for the energy transfer.

Power = W.dt

w = - 1050 J

t = 5 min = 300 s

Then P = 1050 J × 300 = 315000 watt.

Find more on work done :

https://brainly.com/question/13662169

#SPJ1

The velocity of the ball is constant the entire time the ball is moving in a circular path at the end of a rope, in a uniform circular motion.

Hence, Option D is correct.

To know more about Circular motion here

https://brainly.com/question/28503060

#SPJ4

The mass of the object is 36.43 kg.

We can use the equation for force (F) to determine the mass (m) of the object:

F = m × a

Where F is the force applied to the object, m is the mass of the object, and a is the acceleration of the object.

So, in this case, we know that:

F = 255 N

a = 7 m/s²

We can use this information to solve for the mass of the object:

m = F ÷ a

m = 255 N ÷ 7 m/s²

m = 36.43 kg

Therefore, the mass of the object is 36.43 kg.

It's important to notice that this equation only holds if the force applied is the net force, so if there are other forces such as friction or air resistance they should be considered in the calculation.

Learn more about mass:

https://brainly.com/question/19694949

An electrical conductor that has very low resistance to current at low temperatures is called a(n) Superconductor.

A superconductor's hatred of magnetic fields is one of its basic characteristics. A superconductor generates its own equal and opposite magnetic field when a magnetic field is applied by a scientist.

A north-seeking pole (north pole) and a south-seeking pole (south pole) are found at either end of every magnet. Depending on how they are arranged, these two oppositely charged poles enable magnets to both repel and attract other magnets.

To know more about superconductors visit:

brainly.com/question/19618939

#SPJ4