Another host on the local network's network is in conflict with the IP address. When more than one device in a network shares the same IP address, this is known as an IP address conflict. One or both of the devices will be unable to communicate with the wireless network as a result of this.
When a network administrator manually assigns IPs to hosts or devices, this is known as static IP allocation. It is one of the most common causes of windows IP address conflict, which can cause the network administrator to configure two devices with the same IP address. This issue may arise if ineffective IP address management solutions, such as spreadsheets, are utilized. Configuring IP addresses for network devices using both static and dynamic allocation methods can result in IP conflicts. For instance, a network administrator might have given device A the IP address 192.168.1.10 (static IP allocation), and a DHCP server on that network might give the same IP address to a network device that asks for it (dynamic IP allocation); This can result in an IP conflict on the network if two distinct devices share the same IP address. When outside devices entering the network have been statically assigned an IP address, IP conflicts can occur in large organizations that support bring your own device (BYOD) policies. When brought into the corporate network, a device that was statically configured with the IP address 192.168.1.10 in the home network continues to use that IP address. When a different device within the organization has been given the same IP address, this can result in an IP conflict.
To know more about IP address conflict visit https://brainly.com/question/16011753?referrer=searchResults
#SPJ4
StateChart Based Testing:
The following StateCart represent the behavior of the Wiper of the winshield wiper case study.
Wiper 0 wipes/minute InState(Int) InState(Off) 6 wipes/minute InState(2) InState(1) InState(1),( InState(2)12 wipes/minute InState(3) InState(2) InState(3) 20 wips/minute InState(Low) InState Int) 30 wipes/minute InState(High) InState Low) 60 wipes/minute
a) Design test cases based on the segment of the StateChart shown below. Your test cases
should cover all state transitions shown in the given state diagram. Represent your test
cases in a table.
b) Implement Junit test cases to implement your test cases designed above (a)
c) Use case based testing: Consider the following usage scenario.
i.) Design test cases to test the scenario given.
ii.) Implement Junit test cases to implement your test cases designed above (c)
Assume that when lever and dial changes, they do not need to follow any sequential order. For
example, dial can go from 1 to 3 without staying at level 2.
Models have been shown to be useful in a number of software engineering activities, although model-driven development still faces a lot of opposition.
This essay examines a particular facet of the overall issue. It discusses the results of testing class clusters with state-dependent behavior using statecharts. It details a controlled experiment that looked into their effects on evaluating fault-detection efficiency. Statechart-based testing and code-based structural testing are contrasted, and their software is examined to see if they work better together. The effectiveness of the two test procedures in detecting faults is not significantly different, according to the results, but when combined, they are significantly more effective. This suggests that a cost-effective approach would specify statechart-based test cases in advance, run them once the source code is available, and then finish them with test cases based on code coverage analysis.
Know more about software here:
https://brainly.com/question/1022352
#SPJ4
Which of the following IT professions has the task of modifying an existing system called a legacy system?
Head applications developers
Application architects
Database administrators
CIO
Option A ; Head applications developers IT professions has the task of modifying an existing system called a legacy system.
A legacy system is any out-of-date computing device, component, or piece of software that is still in operation. Hardware, programs, file formats, and programming languages used in legacy systems are computers. Not all legacy systems, nevertheless, use outdated technology. hardware in power plants, MS-DOS-controlled manufacturing equipment, or antiquated finance systems. However, many other businesses throughout the world still rely on outdated programs to power crucial business operations. Unexpectedly many businesses still rely on legacy software despite the numerous alarming instances of hazards posed by outdated technology. Because they are typically dependable and well-known to the majority of their users, legacy systems are still in use today.
Learn more about legacy system here:
https://brainly.com/question/29468465
#SPJ4
conditional formatting is a spreadsheet tool that changes how cells appear when values meet a specific condition. data analysts can use conditional formatting to do which of the following tasks? select all that apply. a. to sort data in series of cells into a meaningful order b/ to make cells stand out for more efficient analysis
When values satisfy a predefined criterion, the conditional formatting spreadsheet tool modifies the appearance of the cells. to make cells stand out for more efficient analysis.
Data analysts might highlight specific cells using conditional formatting. One of these in-demand job profiles is the data analyst. To begin with, data analysts are the ones who use data to assist firms in making more informed and effective business decisions. You've come to the perfect site if you're someone who wants to work in the field of data analytics. Data can be sorted, simply arranged, and calculated numerically using a spreadsheet or worksheet, which is a file made up of rows and columns. A spreadsheet program's capacity to perform value calculations based on mathematical formulas distinguishes it from other software.
Learn more about spreadsheet here
https://brainly.com/question/9068845
#SPJ4
Answer: A & B
Explanation:
suppose data array contains 10000000 elements. using the binary search algorithim, one requires only
An effective approach for locating a particular item from a sorted list of elements is binary search. It works by continually dividing the section of the list that might contain the item in half, until there is only one possible position left.
What is the must required for binary search algorithm?Sorted arrays can be used for binary search. A middle-of-the-array element and the desired value are first compared in a binary search. The position of the element in the array is returned if the target value matches the element. The lower half of the array is searched if the target value is less than the element.
To arrive at this point, I comparisons are required, where n2i=1. We get i=logn when we solve for i. Depending on how many items are in the list, the maximum number of comparisons is logarithmic. As a result, the binary search returns O. (logn).A binary search algorithm is used to locate an element in an array that has already been sorted.
To learn more about binary refer to:
https://brainly.com/question/15190740
#SPJ4
Ted, an employee in the sales department, has asked a coworker, Ann, to update the product descriptions contained in a sales document. Ann can open the file, can't save her changes to it.
Which of the following digital security methods is MOST likely preventing her from saving the file?Directory permissions
Most likely, the security measure stopping her from saving the file is the Directory permissions.
Information technology (IT) security is the term used to describe the methods, tools, and personnel used to safeguard a company's digital assets. The goal of IT security is to prevent threat actors, or unauthorized users, from tampering with, stealing from, or exploiting these resources, tools, and services. These threats could come from the inside or the outside, and they could have malicious or accidental intentions.
In order to reduce vulnerabilities and address different cyber threats, an effective security plan uses a number of strategies. The identification, avoidance, and mitigation of security hazards involve the use of IT services, software, and security procedures.
Learn more about security here:
https://brainly.com/question/20408946
#SPJ4
on a windows workstation, you want to use the storage spaces feature to create a logical drive. which of the following components are used to configure storage spaces? (select three.)
Following components are used to configure storage spaces on physical drives, such as SATA drives or external drives, for storage devices.
What constitutes a storage space's primary elements?Physical disks (hard drives, SSDs, etc.) are added to a storage pool, virtualizing the storage so that you can construct virtual disks from open space in the pool, as seen above. Storage Spaces has three main objects. Each disk in the pool receives metadata related to the pool.
Which two elements are needed in storage spaces to establish a virtual disk?By allowing you to construct virtual disks with two storage tiers—an SSD tier for often accessible data and an HDD tier for less frequently accessed data—storage tiers combine the greatest features of SSDs and hard disk drives (HDDs).
To know more about storage visit:-
https://brainly.com/question/13041403
#SPJ4
a tool that reviews a workbook to detect potential issues that could hinder users who access your public files and then alerts you to these issues so that you can address them.
Accessibility Checker is the tool that reviews a workbook to determine potential issues that could hinder users who access your public files and then generates an alert to these issues so that you can address them.
Accessibility Checker is an Excel tool that identifies any potential accessibility issues and generates a report so that you can address the issues to make your file easier for people with disabilities to use.
The Accessibility Checker verifies your file against a set of predefined rules that determine possible issues for people who have disabilities. Based on how severe the issues are, the Accessibility Checker categorized each issue as a warning, error, or tip.
You can learn more about Accessibility Checker at
https://brainly.com/question/25327617
#SPJ4
Write the following method that returns true if the list is already sorted in increasing order.public static boolean isSorted(int[] list)Write a test program that prompts the user to enter a list and displays whether the list is sorted or not. A Sample run is provided on the next page. Note that the first number in the input indicates the number of elements in the list.Enter list: 8 10 1 5 16 61 9 11 1The list is not sortedEnter list: 10 1 1 3 4 4 5 7 9 11 21The list is already sortedA shell source code file called Problem3.java has been provided for you to start with.public class Problem3 {public static void main(String[] args) {//Fill in main code here}public static boolean isSorted(int[] list) {//Fill in isSorted code here}}
Answer: I used the bubble-sort algorithm to solve the isSorted() method
Explanation:
public static boolean isSorted(int[] list){
for(int i = 0;i < list.length;i++){
for(int j = 0; j < list.length - 1 - i;j++){
if(list[j] > list[j + 1]){
return false;
}
}
}
return true;
}
/* Brainly has the tendency to tweak with the code, so if your getting errors I would recommend re-typing everything :) */
write a statement that creates a dictionary containing the following key-value pairs: 'a' : 1 'b' : 2 'c' : 3
Answer:
my_dict = {'a': 1, 'b': 2, 'c': 3}
maggie suspects that a server may be running unnecessary services. which of the following tools is the best choice to identify the services running on the server?
Port scanner is the tool of choice for finding the services active on the server.
Port scanning is the process of looking for open ports on a network that could be receiving or sending data. It also requires sending packets to specific ports on a host and analysing the responses in order to detect vulnerabilities.
This scanning is not feasible in the absence of the initial compilation of a list of active hosts and the assignment of a unique IP address to each host. This procedure, referred to as host finding, begins with a network scan.
The purpose of port and network scanning is to recognize the arrangement of IP addresses, hosts, and ports so that open or vulnerable server locations may be accurately identified and security levels can be evaluated. Network and port scanning can both disclose the presence of security safeguards like a firewall between the server and client computers.
Know more about port scanning here:
https://brainly.com/question/10536867
#SPJ4
Context: Memory leaks are an issue with software just as much as or more than the hardware.
For this discussion assignment:
Examine memory leaks in different operating systems and identify an OS with the least memory leak. Include a comparison of Linux, Mac, and Windows in your discussion post.
In your responses to your peers, compare and contrast your answer to those of your peers.
Your Discussion should be a minimum of 200 words in length and not more than 500 words. Please include a word count.
The Examination of memory leaks in different operating systems and identify an OS with the least memory leak is given below.
What is an OS memory leak?A class of defects known as memory leaks occur when an application fails to release memory when it is no longer required. Memory leaks have an ongoing impact on the operating system's and the specific application's performance. Large leaks may cause excessive paging, which could lead to unacceptably long response times.
An IOS memory leak mean that Memory that your app no longer references that was allocated at some point but was never released. It can no longer be released because there are no references to it, and the memory can no longer be used.
An Android memory leak mean that when memory is allocated but never released, a memory leak occurs. This implies that once we finish eating the takeout, the GC cannot remove the trash. The rendering window on Android is 16 milliseconds, although memory management on the GC typically happens faster.
Therefore, Compared to other operating systems, the Mac operating system leaks memory the least.
Learn more about memory leaks from
https://brainly.com/question/29376559
#SPJ1
In order to complete each sentence, click and drag each word or phrase into the appropriate blank. Then, place the given events of fertilization in a logical order.
Sperms for two, noun, plural, sperms. spermatozoon, a cell of male reproduction.
What root word means seed or sperm?The fallopian tube, which connects the egg with the uterus, guides it. In the event of fertilization, it clings to the uterine wall, signaling the start of pregnancy. The uterus is where an unfertilized egg begins to degrade. Through the cervix, which is the uterine base, it exits the uterus.
Zygote, cleavage, morula, blastocyst, embryo, and fetus are the proper list of those that was given. To put it succinctly, the act of fertilization begins when a sperm cell penetrates the egg. The oocyte has now transformed into a zygote as a result of the union of the egg and sperm cells.
The prefix spermato-, which means "seed" and "sperm," is a combining form. The reproductive cells in semen are known as sperm.
To learn more about logical order refer to :
https://brainly.com/question/1294562
#SPJ1
FILL IN THE BLANK ipsec provides security services at the_______ layer by enabling a system to select required security protocols, determine the algorithms to use for the services and put in place any cryptographic keys required to provide the requested services.
IPSec provides security services at the IP layer by enabling a system to select required security protocols to determine algorithms to use for services and put in place cryptographic keys required to provide the requested services.
What is IPsec used for?When sensitive data is transported across the network, such as financial transactions, medical records, and business conversations, IPsec is used to protect it. Additionally, IPsec tunneling, which encrypts all data exchanged between two endpoints, is employed to safeguard virtual private networks (VPNs).
Additionally, IPsec can secure routers providing routing information over the open internet and encrypt data at the application layer. Additionally, IPsec can be used to offer authentication without encryption, for instance, to confirm that data came from a known sender.
Data can be securely transmitted without utilizing IPsec by applying encryption at the application or transport layers of the Open Systems Interconnection (OSI) model. The encryption is carried out using HTTPS, which operates at the application layer. the Transport Layer Security protocol, which is at the transport layer (TLS)
To learn more about IPsec refer to:
https://brainly.com/question/24475479
#SPJ4
write a small JAVA method to return the longest word in a string using for, do while, or while loops. NO ARRAYS!!!!
- user enters sentence
- method returns longest word
(for example: he plays an interesting sport.
returns interesting)
Answer:
public static String longestWord(String input) {
// split the input string into an array of words
String[] words = input.split(" ");
// initialize the longest word to be the first word in the array
String longestWord = words[0];
// initialize the index of the current word to 1
int i = 1;
// loop through the remaining words in the array
while (i < words.length) {
// if the current word is longer than the longest word,
// update the longest word to be the current word
if (words[i].length() > longestWord.length()) {
longestWord = words[i];
}
// move to the next word in the array
i++;
}
// return the longest word
return longestWord;
}
Explanation:
To use this method, you can call it with a string argument, like this:
String sentence = "he plays an interesting sport";
String longestWord = longestWord(sentence);
// the variable 'longestWord' should now be "interesting"
Note that this method does not use arrays, as requested in the question. Instead, it uses a while loop to iterate over the words in the input string.
A network administrator is installing Ethernet cabling connectors following the US government standard and not by which is a more popular choice. Which connector does the network administrator use?
The US government mandates the use of T568A. In T568A, the green pairs wire to pins 1 and 2, and the orange pairs wire to pins 3 and 6.
Based on the US government's preference to use a standard for connector, not with a popular selection, the connector used by the network administrator is T568A.
The U.S. government mandates the use of the standard T568A connector for wiring done under federal contracts. Based on the condition that while installing Ethernet cabling connectors, a network administrator has to use a connector as per the U.S. government standard, not which is a more popular choice, the network administrator will use the T568A connector.
You can learn more about connector at
https://brainly.com/question/28015204
#SPJ4
FILL IN THE BLANK Technology in those cases is often called a ______ innovation because companies can falter if they fail to respond with effective innovations of their own.
Technology in those cases is often called a disruptive innovation because businesses may suffer if they don't produce successful inventions of their own in response.
What is disruptive innovation ?Disruptive innovation, according to business theory, is innovation that establishes a new market and value network or enters a market from the bottom and eventually supplants long-established market-leading companies, goods, and alliances.Disruptive innovation opens up a completely new market with enormous potential and provides a more accessible, yet still inexpensive, solution to a larger client base. Disruptive technologies are innovations that have a substantial impact on how consumers, markets, and businesses operate.Even breakthrough innovations don't always cause disruption. For instance, because early automobiles were expensive luxury items that did not disrupt the market for horse-drawn vehicles, they were not disruptive innovations when they were introduced in the late 19th century. Up until the 1908 release of the less expensive Ford Model T, the transportation business virtually remained unaffected. Because it revolutionised the transportation industry, unlike the first thirty years of automobiles, the mass-produced automobile was a disruptive innovation.To learn more about disruptive innovation refer :
https://brainly.com/question/15703392
#SPJ4
which of the following is a high-speed network storage solution that can replace locally attached storage on a server
SAN. Speed, scalability, and fault tolerance are some of the advantages of SANs, but there are also some disadvantages to the technology.
An interconnected network of storage devices known as a SAN (storage area network) offers a shared pool of storage space that may be accessed by numerous servers or computers. The main material utilized in building roads, bridges, high-speed trains, and even land regeneration programs is sand. The glass that is used in every window, computer screen, and smart phone is created by melting together crushed sand, gravel, and rock. Sand is used in the manufacture of silicon chips. A switch is used to link servers to storage. Fibre Channel networking is required. For file-based storage, it works best. According to Jay Subramanian, vice president of product management for FlashBlade at Pure Storage, businesses continue to use SAN-based infrastructure to install mission-critical applications and databases. However, contemporary applications are also increasingly relying on newer paradigms, such file and object storage. A disc drive device that automatically backs up its data to a tape device or a distant device mirroring across the SAN are two examples.
Learn more about SAN here
https://brainly.com/question/14105574
#SPJ4
If we need to split the network that contains the following IPv4 CIDR address into 2 equally sized subnets, which of the following are valid subnet addresses? (Check all that apply): 128.35.185.125/24 128.35.185.0/25 128.35.184.0/25 128.35.186.0/25 128.35.187.0/25
The valid subnet addresses are (A): 128.35.185.0/25 and (B): 128.35.184.0/25.
Subnet addressing is a methods that allows an autonomous system made up of several networks to share the same Internet address. The Subnet addressing makes it possible to divide a single network address into multiple logical networks known as subnet addreses. Subnets avoids the need to pass data traffic through unneccasray routers to recah destined place so as making networks traffic more efficient.
When a network that contains the IPv4 CIDR address as 128.35.185.125/24 is splitted into two equal-sized subnets, the resulting valid subnet addresses are 128.35.185.0/25 and 128.35.184.0/25.
"
Complete question:
If we need to split the network that contains the following IPv4 CIDR address into 2 equally sized subnets, which of the following are valid subnet addresses? (Check all that apply): 128.35.185.125/24
A: 128.35.185.0/25
B: 128.35.184.0/25
128.35.186.0/25
128.35.187.0/25
"
You can learn more about subnet addressing at
https://brainly.com/question/8907973
#SPJ4
Consider the following Schemas
Movies (title, year, length, genre, studio, producerName, total Income)
StarsIn (title, year, starName)
MovieExec (name, address, cert#, netWorth)
MovieStar (StarName, address, gender, date of birth)
Procuder (producerName, address, net worth)
Write SQL queries for the following:
a)Find all the animation movies released in 2017 by Marvel.
b)List the number of movies produced by Stan Lee with the total number of different movie stars in those movies.
c)List the movie, which contributes more than 25% of the net income of its producer.
The queries are given as follows:
a)
SELECT title
FROM Movies
WHERE year = 2017 AND genre = 'animation' AND studio = 'Marvel';
b)
SELECT producerName, COUNT(DISTINCT title) AS num_movies, COUNT(DISTINCT starName) AS num_stars
FROM Movies
INNER JOIN StarsIn ON Movies.title = StarsIn.title AND Movies.year = StarsIn.year
INNER JOIN MovieExec ON Movies.producerName = MovieExec.name
WHERE Movies.producerName = 'Stan Lee'
GROUP BY Movies.producerName;
c)
SELECT title
FROM Movies
INNER JOIN MovieExec ON Movies.producerName = MovieExec.name
WHERE Movies.totalIncome / MovieExec.netWorth > 0.25;
How to obtain the queries?The queries are obtained with filters from the desired data-sets, as SQL works with databases.
For item a, all the movies are listed with their title, considering that the filters are:
Movies released in 2017.Genre: Animation movies.Studio: Marvel.For item b, all the movies produced by Stan Lee are ranked according to the total number of movie starts in those movies.
For item c, the ratio of the income of the movie and the income of the producer is calculated, as then the movies that contribute to more than 25% of the net income of the produced are listed.
More can be learned about SQL programming at https://brainly.com/question/13153664
#SPJ1
that supports the technologies the An advantage of an _____ intranet is that the organization can specify a(n) organization uses, such as Internet telephony or video conferencing. a. browser b. RSS feed c. top level domain d. search engine
The best choice is A. The ability to designate organizational uses, such as Internet telephony or video conferencing, is a benefit of a browser intranet.
The intranet's web server makes use of TCP/IP, HTTP, and other internet protocols. Through one or more gateway computers, an intranet often has access to the public internet and other services. Websites can also contain audio, video, animation, graphics, and hypertext in addition to basic text. Hypertext links allow users to navigate to other web pages by clicking on them. An intranet is a private network website that is utilized within an organization. TCP/IP, the same technology used by the web, is used by intranet websites.
Learn more about network here-
https://brainly.com/question/14276789
#SPJ4
write the definition of a class teelphone. the class has no constructors and one static method printnumber
After that, we build the main method, inside of which we create a string variable, set its value to "ABCD," and then call the function that prints the value of the string variable.
defining a public class for telephones.
{
void public static the method printNumber(String s) /define
{
Print the value using System.out.print(s).
}
defining the main method in public static void main(String[] args)
{
Define the variable s and give it a value with the string s="ABCD"
printing the number (s); calling the function
}
}
The class "Telephone" is defined in the Java program above. We define the function "printNumber" inside the class. The function accepts one string argument, "s," and since we use the return type void, it doesn't produce any results. This function prints the value of the pass variable.
Learn more about variable here-
https://brainly.com/question/13375207
#SPJ4
Your organization frequently has guests visiting in various conference rooms throughout the building. These guests need access to the Internet via the wireless network, but should not be able to access internal network resources. Employees need access to both the internal network and the Internet. Which of the following would BEST meet this need?
A. NAT
B. DMZ
C. VPN
D. 802.1x
Drive-by downloads or phishing emails with infected attachments are common ways that ransomware is transmitted.
What does a ransomware program do?
Ransomware is a sort of software that prohibits you from accessing your device and the data stored on it, typically by encrypting your files. Then a criminal organization will demand a ransom in return for decryption.
What is referred to as ransomware?
Malware known as ransomware restricts or prevents users from accessing their systems, either by locking the system's screen or by encrypting the users' files, in exchange for a ransom.
To know more about Ransomware visit;
https://brainly.com/question/14455233
#SPJ4
What happened when you add And to your search phrase?
Answer:
The results will include both terms.
Which of the following protocols establish a secure connection and encrypt data for a VPN? (Select THREE).
A. FTP B. PPTP C. IPSec D. RDP E. L2TP
L2TP, IPSec, PPTP are the protocols that establish a secure connection and encrypt data for a VPN.
Why would someone use a VPN?The term "Virtual Private Network," or VPN, refers to the possibility of creating a secure network connection when utilizing public networks. VPNs mask your identity online while encrypting your internet traffic.
What are the drawbacks of utilizing a VPN?Some VPNs could slow down your connection. It's possible that you won't be able to access certain goods or websites, including Netflix. Some countries, like China, forbid or strictly regulate the usage of VPNs. It's hard to know how securely your data is protected when using a VPN.
To know more about VPN visit:
https://brainly.com/question/29432190
#SPJ1
this lab is an extension to lab 06. you should build upon your existing work in lab 06 and add an additional functionality of supporting standard input and output redirection. for this lab, you will implement a program that continually prompts the user to enter a shell command with its options and ar- guments. the command may contain standard input and output redirection operators (e.g., cat file1.txt > output.txt, wc -cl < input.txt, head -n 5 < input.t
The goal of this project is to create a C program that acts as a shell interface and runs each command in its own process after accepting it from the user.
The goal of this project is to create a C program that acts as a shell interface and runs each command in its own process after accepting it from the user. Input and output redirection will be supported by your implementation, and pipes as an IPC method between two commands will also be supported. This project can be finished on a Linux machine and requires the use of the UNIX fork(), exec(), wait(), dup2(), and pipe() system functions.
The user is presented with a prompt through a shell interface, and then the following command is typed. The following example demonstrates the osh> prompt and the user's subsequent command: cat program c (This command uses the UNIX cat command to display the file prog.c on the terminal.)
Having a shell interface is one method of implementing a shell interface.
Know more about program here:
https://brainly.com/question/14368396
#SPJ4
all of the following are good questions that can help determine if an underage person is using a borrowed id except:
all of the following are good questions that can help determine if an underage person is using a borrowed id except: Your response is untrue. What is the number to your home?
A minor is a person who is not a legal adult according to the law. This age is usually the so-called "age of majority." The majority age varies by jurisdiction and application but is typically 18 years old. The word "minor" can also be employed in situations that have nothing to do with the general age of majority. For instance, the legal drinking and smoking age in the United States is 21, and even though a person is at least 18, they may still be referred to as a juvenile under the terms of the tobacco and alcohol laws if they are under 21. Underage or minor can also refer to someone who is younger than other legal age restrictions, such as the age of consent, the marriageable age, the driving age, the voting age, etc. These age restrictions frequently differ from the age of majority. In most countries, the definition of a minor is ambiguous. The ages of criminal responsibility and consent, the end of mandatory school attendance, the beginning of legally enforceable contracts, and other milestones may differ from one another.
Learn more about underage person here
https://brainly.com/question/10789364
#SPJ4
coronado cannot use the income statement as a measure of cash flows because it is calculated on a(n) basis rather than a(n) basis.
A company's sources and uses of cash are tracked by a cash flow statement, whereas its financial performance is assessed by an income statement.
What distinguishes an income statement from a cash flow statement?The cash flows from a company's investing, financing, and operating activities are listed on a cash flow statement. Users can view a company's sales, profits, costs, and losses over a certain time period by consulting an income statement.
Income statements or cash flow statements: which is more significant?The income statement, which shows a company's potential to make a profit, is likely to be the most crucial financial statement for the majority of users.
To know more about income visit:-
https://brainly.com/question/14732695
#SPJ4
pip is configured with locations that require tls/ssl, however the ssl module in python is not available
Using the knowledge in computational language in python it is possible to write a code that pip is configured with locations that require tls/ssl, however the ssl module.
Writting the code:find /etc/ -name openssl.cnf -printf "%h\n"
/etc/ssl
curl -O
tar xzf openssl-VERSION
pushd openssl-VERSION
./config \
--prefix=/usr/local/custom-openssl \
--libdir=lib \
--openssldir=/etc/ssl
make -j1 depend
make -j8
make install_sw
popd
pushd python-3.x.x
./configure -C \
--with-openssl=/usr/local/custom-openssl \
--with-openssl-rpath=auto \
--prefix=/usr/local/python-3.x.x
make -j8
make altinstall
See more about python at brainly.com/question/18502436
#SPJ1
TRUE/FALSE. if you send an email to a friend about something that happened at work, you are still in control of that information
True. You are in control of the information that you choose to send in the email.
What is email?
Email is an electronic communication tool that allows users to exchange messages, documents, images and videos across the internet. It is a very convenient and efficient way of communication as it enables users to send and receive messages quickly and easily. Emails can be sent to multiple recipients at the same time and can contain attachments. Emails allow users to communicate with people around the world and can be used for both personal and professional purposes. Email is also a great way to keep in contact with friends, family and colleagues and to stay up to date with news, events and information. It is also a popular tool for marketing, providing an easy way to reach large numbers of customers.
To learn more about email
https://brainly.com/question/29515052
#SPJ4
a native mobile app is: a responsive mobile app. a mobile website. a mobile web app. a standalone application that does not use a browser. one that can only operate on selected devices.
An internal software system's interactions with external entities are depicted in a context diagram. It is primarily employed to assist organizations in comprehending the extent of a system.
They can then determine the best way to build a new system and its specifications or how to enhance an existing system. The data flow diagram is the main tool for displaying a system's component activities and the data flow between them. Systems development is the umbrella term for all the processes involved in creating an information system to address a business issue or opportunity. Prior to making any plans, it is essential to have a complete understanding of the current setup and decide how to make the most effective use of computers.
Learn more about software here-
https://brainly.com/question/11973901
#SPJ4