A gas expands and does PV work on its surroundings equal to 322 J. At the same time, it absorbs 132 J of heat from the surroundings. Calculate the change in energy of the gas. Note: PV work means work done by a changing volume against constant pressure. Enter your answer in scientific notation.

Answer:

The bright side of the moon will become less and less and will eventually be covered in complete darkness :)

To learn more about this topic, click this link below :)

https://brainly.com/question/9044312

Have an amazing day!!

Please rate and mark brainliest!!

Answer:

electrolysis is the process by which electric current is passed through a substance to effect a chemical change

pl (25*C)

Arginine -----> 10.76

Glutamic -----> 3.08

Asparagine -----> 5.43

Tyrosine -----> 5.63

☆...hope this helps...☆

_♡_mashi_♡_

Answer:

Technology is the application of scientific knowledge for practical purposes especially in industry.

The law of conservation of mass say that, in a chemical reaction, the mass of the reagents will always be equal to the mass of the products.

If we have 29.5 g of HBr, we must have 100 g of H2 and Br2 together, so:

Answer:

24.0 g C₃H₈

Explanation:

To find the mass of C₃H₈, you need to (1) convert grams CO/H₂ to moles CO/H₂ (via molar mass), then (2) convert moles CO/H₂ to moles C₃H₈ (via mole-to-mole ratio from reaction coefficients), and then (3) convert moles C₃H₈ to grams C₃H₈ (via molar mass). It is important to arrange the conversions/ratios in a way that allows for the cancellation of units (the desired unit should be in the numerator). The final answer should have 3 sig figs to reflect the sig figs in the given values.

Molar Mass (CO): 12.011 g/mol + 15.998 g/mol

Molar Mass (CO): 28.009 g/mol

Molar Mass (H₂): 2(1.008 g/mol)

Molar Mass (H₂): 2.016 g/mol

Molar Mass (C₃H₈): 3(12.011 g/mol) + 8(1.008 g/mol)

Molar Mass (C₃H₈): 44.097 g/mol

3 CO + 7 H₂ ----> 1 C₃H₈ + 3 H₂O
^           ^              ^

45.8 g CO           1 mole              1 mole C₃H₈          44.097 g
-----------------  x  ------------------  x  --------------------  x  ------------------  =
                           28.009 g           3 moles CO            1 mole

=  24.0 g C₃H₈

87.3 g H₂           1 mole           1 mole C₃H₈          44.097 g
----------------  x  ---------------  x  ---------------------  x  -----------------  =  
                          2.016 g           7 moles H₂             1 mole

=  273 g C₃H₈

It was necessary to find the mass of the products from both of the reactants because you did not know which one was the limiting reagent. The limiting reagent is the reactant which is completely used up first. Because CO produced the smaller amount of product, it must be the limiting reagent. Therefore, the actual amount of C₃H₈ produced is 24.0 grams.

Whether a living or non-living object, everyone has a particular life cycle. It starts right from the birth and ends upon the death of that object. Just like others, stars also have their own life cycle and that has different stages.

Nebula ⇒ Protostar ⇒ Supergiant ⇒ Supernova ⇒ Neutron Star

In the initial stage, a star is in the form of a nebula. At this stage, it is a huge cloud of gas and dust. The changes occur in the star and the final size totally depends upon the size of that star.

In a massive star, the fuel is used very quickly because of its life span of a few hundred thousand years. The second stage is the Protostar.

The next stage is the Supergiant. At this stage, the nuclear reactions that occur because of the hydrogen will gradually run out and the star will enter the final phase of its life span. The bigger star will have more massiveness.

Following this, the star will enter the next stage, i.e., supernova, and after that, neutron star. In a supernova, the star will have a very energetic and violent end. In the last stage, when the dust particles clear, a neutron star will be visible.

For better understanding, an image is attached at the end.

Thus, the life cycle of a high-mass star is arranged from its birth to its death.

https://brainly.com/question/27997005

#SPJ1

The stages of a high-mass star's life cycle in the correct order, from a star's birth to its death are-

Nebula

Protostar

Supergiant

Supernova

Neutron star

The life cycle of a high-mass star begins with a nebula, a cloud of gas and dust in space. As gravity pulls the nebula together, it forms a protostar—a young, hot, and dense object. The protostar continues to gather mass and becomes a main-sequence star, burning hydrogen in its core.

Once the hydrogen is exhausted, the star expands into a supergiant and starts fusing helium into heavier elements. Eventually, it undergoes a supernova explosion, releasing an enormous amount of energy and leaving behind a dense core known as a neutron star. This process showcases the incredible transformations that high-mass stars undergo throughout their life cycle.

Learn more about High-mass star, here:

https://brainly.com/question/30706375

#SPJ3

13.73 L of oxygen gas were used up if 185 g of wax [tex]C_{22}H_{44}[/tex] burns.

What is an ideal gas equation?

The ideal gas law (PV = nRT) relates the macroscopic properties of ideal gases. An ideal gas is a gas in which the particles (a) do not attract or repel one another and (b) take up no space (have no volume).

First, calculate the moles of the gas using the gas law,

PV=nRT, where n is the moles and R is the gas constant. Then divide

the given mass by the number of moles to get molar mass.

Given data:

P= 101kpa =0.996792 atm

V= ?

R=[tex]0.082057338 \;L \;atm \;K^{-1}mol^{-1}[/tex]

T=25 +273 =298 K

Moles =?

[tex]Moles = \frac{mass}{molar \;mass}[/tex]

[tex]Moles = \frac{185 g }{308.6}[/tex]

Moles =0.56

Putting value in the given equation:

[tex]\frac{PV}{RT}=n[/tex]

[tex]0.56= \frac{0.996792\;atm\; X \; V }{0.082057338 \;L \;atm \;K^{-1}mol^{-1} X 298}[/tex]

13.73 L =V

13.73 L of oxygen gas were used up if 185 g of wax [tex]C_{22}H_{44}[/tex] burns.

Learn more about the ideal gas here:

https://brainly.com/question/27691721

#SPJ1

Each section would be 230 centimeters or 2.30 meters long.

The original wood pole is 12 meters long.

12 meters = 12 x 100 = 1200 centimeters

It is to be cut into 5 equal sections: 1200/5 = 240 centimeters

But each cut wastes 10 cm of the pole.

          240 - 10 = 230 centimeters.

Thus, each section would be 230 centimeters or 2.30 meters long.

More on sectional divisions can be found here: https://brainly.com/question/15381501

#SPJ1

The molecular mass of a 2.66g sample of gas at a temperature of pressure of 845torr and occupying a volume of 0.70L is 84.16g/mol.

The molecular mass can be calculated by first calculating the number of moles using the following formula:

PV = nRT

Where;

1.112 × 0.7 = n × 0.0821 × 300

0.7784 = 24.63n

n = 0.032mol

molecular mass = 2.66g ÷ 0.032mol

molecular mass = 84.16g/mol

Therefore, the molecular mass of a 2.66g sample of gas at a temperature of pressure of 845torr and occupying a volume of 0.70L is 84.16g/mol.

Learn more about molar mass at: https://brainly.com/question/14122402

#SPJ1

Answer: A. The particles move faster

Explanation:

Increasing the temperature increases the kinetic energy of the particles, causing them to move faster.

Magnesium has atomic no 12

Electronic configuration given by

Or

[tex]1s^22s^22p^63s^2[/tex] is the electron configuration for magnesium. Therefore, the correct option is option C.

The positioning of electrons within an atom is referred to as electron configuration. The distribution of electrons in each of their corresponding energy levels or orbitals is described in great detail. The notation known as the Aufbau principle is frequently used to represent the electron configuration of an atom. This theory states that electrons fill an atom's orbitals starting at the lowest energy level and moving up the energy scale. The energy level diagram, which can also be represented by a periodic table, serves as the foundation for this sequential filling. A maximum of two electrons can be held in the main level, the initial energy level, which is closest to the nucleus. [tex]1s^22s^22p^63s^2[/tex] is the electron configuration for magnesium.

To know more about electron configuration, here:

https://brainly.com/question/29157546

#SPJ6

20.24 grams of [tex]N_2O[/tex] is formed if 0.46 mole of [tex]NH_4NO_3[/tex] is used in the reaction.

A mole is defined as 6.02214076 × [tex]10^{23}[/tex]of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.

Balanced equation:

[tex]NH_4NO_3[/tex] → [tex]N_2O + 2H_2O[/tex].

1 mole [tex]NH_4NO_3[/tex] gives 1 mole of [tex]N_2O.[/tex]

0.46 mole of [tex]NH_4NO_3[/tex] gives [tex]\frac{ 1 mole}{ 1 mole}[/tex] x 0.46 mole [tex]N_2O[/tex].

0.46 mole [tex]N_2O[/tex] =[tex]\frac{mass}{44.013 g/mol}[/tex]

Mass= 0.46 x 44.013

Mass=20.24gram.

Hence, 20.24 grams of [tex]N_2O[/tex] is formed if 0.46 mole of [tex]NH_4NO_3[/tex] is used in the reaction.

Learn more about moles here:

https://brainly.com/question/8455949

#SPJ1

Based on the electron configuration of the two atoms predict the ratio of metal cationic (+) atom to nonmetal anionic (-) atom in the compound hence the ratio is 1:1.

The Octet Rule states that the atoms of the elements bond to each other in an attempt to complete their valence shell (the last shell of the electrosphere).

Basically, they obey the octet rule which states that the capacity of atoms (e.g. here Magnesium and Sulfur) to prefer to have 8 (eight) electrons (e-) in their respective valence shells. In this case,  Magnesium is Mg (+2) and Sulfur is (-2) hence the ratio is 1:1.

See more about octet rule at brainly.com/question/865531

#SPJ1

Answer:

Adsorption is the adhesion of atoms, ions or molecules from a gas, liquid or dissolved solid to a surface. This process creates a film of the adsorbate on the surface of the adsorbent. This process differs from absorption, in which a fluid is dissolved by or permeates a liquid or solid.

while ,

Absorption is a physical or chemical phenomenon or a process in which atoms, molecules or ions enter some bulk phase – liquid or solid material. This is a different process from adsorption, since molecules undergoing absorption are taken up by the volume, not by the surface

[tex] \\ [/tex]

-,-

C. The number of moles of H in 0.109 mole of N₂H₄ is 0.436 mole

D. The number of moles of H in 34 moles of C₁₀H₂₂ is 748 moles

1 mole of N₂H₄ contains 4 moles of H

Therefore,

0.109 mole of N₂H₄ will contain = 0.109 × 4 = 0.436 mole of H

1 mole of C₁₀H₂₂ contains 22 moles of H

Therefore,

34 mole of C₁₀H₂₂ will contain = 34 × 22 = 748 mole of H

Learn more about mole:

https://brainly.com/question/13314627

#SPJ1

Answer:

s

Explanation:

Answer:

Answer choices A, B, and C all contain a certain level (or amount, if you will) of Calcium Carbonate, but B. chalk contains the most amount out of all three.

Explanation:

I hope that this was helpful! (✿◠‿◠)

Thank you!

The amount of water that will be produced is 50.36 grams

The metabolism of glucose is represented by the following equation:

[tex]C_6H_1_2O_6(s)+6O_2(g)--- > 6CO_2(g)+6H_2O(g)[/tex]

The mole ratio of glucose metabolized to the water produced is 1:6.

Mole of 84.0 g glucose = 84/180.156 = 0.4662 moles

Equivalent mole of water = 0.4662 x 6 = 2.7975 moles

Mass of 2.7975 moles water = 2.7975 x 18 = 50.36 grams

More on stoichiometric problems can be found here: https://brainly.com/question/14465605

#SPJ1

589L volume of carbon dioxide in litres could be generated at 0.96 atm and 362. K by the combustion of 228.85 grams of oxygen gas excess pentane gas ([tex]C_5H_{12}[/tex])

The ideal gas law (PV = nRT) relates the macroscopic properties of ideal gases. An ideal gas is a gas in which the particles (a) do not attract or repel one another and (b) take up no space (have no volume).

[tex]C_5H_{12}(g) + 8 O_2(g)[/tex] --->[tex]5 CO_2(g) + 6 H_2O(g)[/tex]

To find the volume, you need to use the Ideal Gas Law. The equation looks like this:

PV = nRT

In this equation,

P = pressure (atm)

V = volume (L)

n = number of moles

R = constant (0.0821 L*atm/mol*K)

T = temperature (K)

To find the volume of water vapour, you need to (1) convert grams C₅H₁₂ to moles C₅H₁₂ (via molar mass), then (2) convert moles C₅H₁₂ to moles H₂O (via mole-to-mole ratio from reaction coefficients), then (3) calculate volume H₂O (via Ideal Gas Law). The final answer should have 3 sig figs.

Molar Mass (C₅H₁₂) =72.151 g/mol

1 C₅H₁₂ (g) + 8 O₂ (g) -----> 5 CO₂ (g) + 6 H₂O (g)

228.85 g C₅H₁₂           1 mole            6 moles H₂O

-----------------------  x  ----------------  x  -----------------------  =  19.03 moles H₂O

                                 72.151 g           1 mole C₅H₁₂

Moles of H₂O=  19.03

P =0.96 atm            

R = 0.0821 L x atm/mol x K

V = ?                          

T = 362 K

n =  19.03 moles

PV = nRT

(0.96  atm)V = ( 19.03 moles)(0.0821 Latm/molK)(362K)

(0.96  atm)V = 565.575406

V = 589L

Hence, 589L volume of carbon dioxide in litres could be generated at 0.96 atm and 362. K by the combustion of 228.85 grams of oxygen gas excess pentane gas ([tex]C_5H_{12}[/tex]).

Learn more about the ideal gas here:

https://brainly.com/question/27691721

#SPJ1

Answer:

propene

Explanation:

According to the rules,the name of hydrocarbon:root word+suffix=prop+ene=propene

Thorium 234 is the daughter product of Uranium-238 decays whereas protactinium 234 is the daughter product of Thorium -228.

If an atom of Uranium-238 decays via alpha emission, a nucleus of uranium 238 decays by alpha emission to form a daughter nucleus, thorium 234 while If an atom of Thorium -228 decayed via beta emission, the daughter isotope is protactinium 234.

So we can conclude that thorium 234 is the daughter product of Uranium-238 decays whereas protactinium 234 is the daughter product of Thorium -228.

Learn more about isotope here: https://brainly.com/question/14220416

#SPJ1

The ratio of diffusion rates of ¹H₂ to ²H₂ is 1.4 while the ratio of diffusion rates of O₂ to O₃ is 1.2.

Graham’s law states can be described as the rate of diffusion of a gas is inversely proportional to the square root of its molecular weight of the gas.

According to this Law, molecules with lower molecular mass will diffuse faster than those with higher molecular mass molecules at constant pressure and temperature.

The mathematical formula is utilized to compare the rates of diffusion of two different gases at pressures and temperatures.

[tex]{\displaystyle \frac{R_1}{R_2} =\sqrt{\frac{M_2}{M_1} }[/tex]

Where M₁ and M₂ represent the molar mass of gas 1 and gas 2.

Given, the molar mass of  ¹H₂  = 2.0 g/mol

The molar mass of to ²H₂ = 4.0 g/mol

The ratio of the rate of diffusion of ¹H₂ to ²H₂:

[tex]{\displaystyle \frac{R_{^1H_2}}{R_{^2H_2}} =\sqrt{ \frac{M_{^2H_2}}{M_{^1H_2}} }[/tex]

[tex]{\displaystyle \frac{R_{^1H_2}}{R_{^2H_2}} =\sqrt{ \frac{4}{2} }[/tex]

[tex]{\displaystyle \frac{R_{^1H_2}}{R_{^2H_2}} =1.4[/tex]

Given, the molar mass of  O₂  = 32.0 g/mol

The molar mass of to O₃ = 48.0 g/mol

The ratio of the rate of diffusion of O₂ to O₃:

[tex]{\displaystyle \frac{R_{O_2}}{R_{O_3}} =\sqrt{ \frac{M_{O_3}}{M_{O_2}} }[/tex]

[tex]{\displaystyle \frac{R_{O_2}}{R_{O_3}} =\sqrt{ \frac{48}{32} }[/tex]

[tex]{\displaystyle \frac{R_{O_2}}{R_{O_3}} =1.2[/tex]

Learn more about Graham's law, here:

brainly.com/question/12415336

#SPJ6

For the 6s subshell, the magnetic quantum number is zero while for the 4f subshell we have -3, -2, -1, 0, 1, 2, 3.

The magnetic quantum number takes on values between 0 to (n - l). It gives the orientations of the sublevels. The four types of quantum numbers are;

For the 6s subshell, the magnetic quantum number is zero while for the 4f subshell we have -3, -2, -1, 0, 1, 2, 3.

Learn more about magnetic quantum number:https://brainly.com/question/24204727

#SPJ1

Wastewater can be treated using series of eight steps which would be clarified below.

Wastewater is the type of water that is used for four different purposes in homes,offices, industries and factories.

These wastewater contain human waste, food scraps, oils, soaps and chemicals which can be treated and reused through the following means:

Learn more about water treatment here:

https://brainly.com/question/13348717

#SPJ1

The symbol of the radioactive nuclide, given the data is ⁴⁰₁₉K

From the question given above, the atomic number of the nuclide is 19.

Comparing the atomic number (i.e 19) of the nuclide with those in the periodic table, the nuclide is potassium with a symbol of K

The symbol of a nuclide is given as ᴬ₂X

Where

Thus,

ᴬ₂X => ⁴⁰₁₉K

Therefore, the symbol of the nuclide is ⁴⁰₁₉K

Learn more about composition of atoms:

https://brainly.com/question/886387

#SPJ1

Explanation:

B. 1.00 x 10^-2 M HCI

The question is asking us to find the molarity/concentration of the acid (HCl).

We have been provided with;

We know that molarity (M) of a solution is contained in 1 L or 1000 mL or 1000 cm³.

This means that;

5.0 x 10^-³ moles is contained in 1000 mL.

is contained in 1000 mL.X mol is contained in 20.0 mL

[tex]x \: mol \: = \frac{20 \times 5.0 \times {10}^{ - 3} }{1000} \\ = 0.0001 \: mol[/tex]

= 0.0001 moles

These 0.0001 moles is contained in 10 mL of HCl.

To find the molarity of the acid;

0.0001 moles is contained in 10 mL

x mol is contained in 1000 mL

[tex]x \: mol \: = \frac{0.0001 \times 1000}{10} \\ = 0.01 \: mol[/tex]

= 0.01 M

Therefore the Concentration of the acid (HCl) is 0.01 M or 1.0 x 10^-2 M