A force of 100 newtons was necessary to lift a tree. A total of 50 joules of work was done. How far was the tree lifted

Answer:

An ecosystem is a community or group of living organisms that live in and interact with each other in a specific environment.

Explanation:

That's the most straight forward explanation I could come up with

Answer:

45.7g of CO₂ is the maximum amount of carbon dioxide that could be produced.

Explanation:

Hexane, C₆H₁₄, reacts with O₂ to produce H₂O and CO₂ as follows:

C₆H₁₄ + 13/2O₂ → 7H₂O + 3CO₂

Where 1 mole of hexane reacts with 13/2 moles of O₂.

To solve this question we need to convert the mass of each reactant to moles in order to find the limiting reactant. With limiting reactant we can find the maximum amount of CO₂ produced:

Moles C₆H₁₄ -Molar mass: 86.18g/mol-:

64g C₆H₁₄ * (1mol / 86.18g) = 0.7426 moles C₆H₁₄

Moles O₂ -Molar mass: 32g/mol-:

72.0g O₂ * (1mol / 32g) = 2.25 moles O₂

For a complete reaction of 2.25 moles of O₂ are required:

2.25 moles O₂ * (1mol C₆H₁₄ / 13/2 moles O₂) = 0.346 moles of C₆H₁₄

As there are 0.7426 moles of C₆H₁₄, C₆H₁₄ is the excess reactant and:

Oxygen is limiting reactant.

The maximum moles of CO₂ that could be produced are:

2.25 moles O₂ * (3mol CO₂ / 13/2 moles O₂) = 1.038 moles CO₂

In grams:

1.038 moles CO₂ * (44.01g / mol) =

Answer:

h3po2

Explanation:

Answer:

i think it is H3PO4

Explanation:

Answer:

ANSWER OS HERE

Explanation:

THE O2- has two more extra electrons due to presence of 2 negative charges so a total of 10 electrons and the element that has 10 electrons in the periodic table in its neutral state is Neon (Ne) ( atomic number (10) = no.of protons = no. of electrons) so neutral element with same electron configuration as O2- is Ne. Log in or register to post comments.

The electron configuration of the neutral atom is an useful place to start when trying to determine the electron configuration of an ion.

The neutral atom in your situation is sulfur (S), which is found in group 16 of period 3 of the periodic chart. A neutral sulfur atom has a total of 16 electrons surrounding its nucleus since sulfur has an atomic number of 16. Thus, a neutral sulfur atom will have the following electron configuration. Now, a neutral sulfur atom receives two more electrons to create the sulfide anion, or S2. These two electrons will be added to the 3p-orbitals, which can hold a maximum of two protons, as you can see in the configuration of the neutral atom. between them, a maximum of six electrons. Thus, the sulfide anion's electron configuration will be the electron configuration of neon, the noble gas that appears before sulfur in the periodic table, will be used in the shorthand notation for noble gases for the sulfide anion.

To know more about Electronic configuration, visit-https://brainly.com/question/13497372

#SPJ2

Answer:2NaF + Br2 —> 2NaBr + F2

2K + Cl2 —> 2KCl

N2+ 3F2 —> 2NF3

Explanation:

Answer:

In chemical reactions, elements tend to combine with other elements to INCREASE_ stability and DECREASE total energy.

Explanation:

The chemical compounds when joining are more stable in external media such as solvents or solutions already formed, although this union with another chemical compound removes total energy from the compound.

Mass of sample : 1987.5 g≈1990 g

Given

12% mass of Lithium chlorate

Required

Mass of sample

Solution

%mass = (mass of solute/mass of solution) x 100%

mass of solute = mass of Lithium chlorate = 238.5 g

Input the value :

12/100(0.12) = 238.5 g : mass of solution

mass of solution =238.5 : 0.12

mass of solution = 1987.5≈1990 g

Answer:

Percent relative error = 0.191%

Explanation:

Relative error is a measure of accuracy (How closeness is the measure to the accepted value) for a determined data. The formula is:

Percent relative error = |Experimental - Accepted| / Accepted * 100

Where experimental is the average of the data:

(40.220g/mol + 40.654g/mol + 40.314g/mol + 40.165g/mol + 40.554g/mol) / 5 =

40.381g/mol

Replacing using accepted value = 40.304g/mol:

|40.381g/mol - 40.304g/mol| / 40.304g/mol * 100

Answer:

A is the answer the reason why is because I got it right when I was doing my test

Answer:

d. 10 million years

Explanation:

These are the options for the question

Choose one answer.

a. 2.5 million years

b. 5 million years

c. 15 million years

d. 10 million years

✓half-life of the radioactive substance= 5 million years

✓ Then for every 5 million years, original radioactive given (100%) percentage is reduced by factor of 1/2.

✓ 1st 5 million year; After the first 5 million years, the original radioactive is reduced as;

(100%) × 1/2 = 50% remains

✓2nd 5 million year: At 10 millions year, the 50% remaining radioactive is reduced by factor of 1/2

(50%) × 1/2 = 25% remains

Hence, at At 10 millions years 25% of the original radioactive atoms remain

.

Answer:

10 million years

x = = 0.50 M Answer:

In order to produce some SbCl5, a 1.00 mole sample of SbCl3 is first placed in an empty 2.00 liter container maintained at a temperature different from 182oC. At this temperature, Kc, equals 0.117. How many moles of Cl2 must be added to this container to reduce the number of moles of SbCl3 to 0.700 mole at equilibrium

Moles Cl2 that must be added = 0.40 mol

Explanation:

K = ( = 0.117

Equilibrium concentrations:

= (1.00 - 0.70) mol / 2.00 L = 0.15 M <<---why is it 1.00-0.70???

= 0.700 mole / 2.00L = 0.350 M

= x

Kc = ÷ (0.15) = 0.117

Moles Cl2 at equilibrium = 0.050 mol L x 2.00 L = 0.10 mol

Moles Cl2 needed to make 0.300 mol SbCl3 into SbCl5 = 0.30 mol

Moles Cl2 that must be added = 0.40 mol

Answer:

1.51×10²³ atoms.

Explanation:

From the question given above, the following data were obtained:

Mass of Calcium (Ca = 10 g

Number of atom of Calcium (Ca) =?

The number of atoms present in 10 g of Ca be obtained as follow:

From Avogadro's hypothesis, we understood that 1 mole of any substance contains 6.02×10²³ atoms. This implies that 1 mole Ca contains 6.02×10²³ atoms.

1 mole of Ca = 40 g.

Now, if 40 g of Ca contains 6.02×10²³ atoms.

Therefore, 10 g of Ca will contain = (10 × 6.02×10²³) / 40 = 1.51×10²³ atoms.

Thus, 10 g of calcium contains 1.51×10²³ atoms.

Answer:

Answer:

Reversible

Explanation:

Changes of state are physical changes in matter. Common changes of the state include melting, freezing, sublimation, deposition, condensation, and vaporization.

Answer:

C) tellurium (Te) is the correct answer.

Answer:

4Al+3O2→2Al2O3

Explanation:

Answer:

0.171 M

Explanation:

Step 1: Given data

Step 2: Calculate the moles of solute

The molar mass of H₃PO₄ is 97.99 g/mol.

3.35 g × 1 mol/97.99 g = 0.0342 mol

Step 3: Convert "V" to liters

We will use the conversion factor 1 L = 1000 mL.

200 mL × 1 L/1000 mL = 0.200 L

Step 4: Calculate the molarity of the solution

We will use the definition of molarity.

M = moles of solute / liters of solution

M = 0.0342 mol/0.200 L = 0.171 M

The  uncertainties  of  the  delta  measurements  and  the  uncertainty  of  the  atomic  weight  derivedfrom  the  best  measurement  of  isotopic  abundances  constrain  the  number  of  significant  figures  in  theatomic-weight values of the upper and lower bounds. For carbon, the fifth digit after the decimal pointis uncertain because of the uncertainty value of 0.000 027. Therefore, the number of significant digitsin the atomic-weight value is reduced to four figures after the decimal point. The Commission may rec-ommend  additional  conservatism  and  reduce  the  number  of  significant  figures  further.  For  the  lowerbound of carbon, 12.009 635 is truncated to 12.0096. For an upper bound, the trailing digit is increasedto ensure the atomic-weight interval encompasses the atomic-weight values of all normal materials. Inthe case of carbon, the upper bound is adjusted from 12.011 532 to 12.0116 to express four digits afterthe decimal point. The lower and upper bounds are evaluated so that the number of significant digits ineach  is  identical.  If  a  value  ends  with  a  zero,  it  may  need  to  be  included  in  the  value  to  express  therequired number of digits. The following are examples of lower and upper atomic-weight bounds foroxygen that could be published by the Commission in its various tables.

---------------------------

Extracted from" Atomic weights of the elements 2009 (IUPAC Technical Report)"

Answer:

7.93 × 10⁻¹³ km/s

Explanation:

Step 1: Given data

Rate of growth of the fingernails (r): 2.50 cm/year

Step 2: Convert "r" from cm/year to km/year

We will use the following conversion factors.

[tex]\frac{2.50cm}{year} \times \frac{1m}{100cm} \times \frac{1km}{1000m} = 2.50 \times 10^{-5} km/year[/tex]

Step 3: Convert "r" from km/year to km/s

We will use the following conversion factors.

[tex]\frac{2.50 \times 10^{-5} km}{year} \times \frac{1year}{365day} \times \frac{1day}{24h} \times \frac{1h}{60min} \times \frac{1min}{60s} = 7.93 \times 10^{-13} km/s[/tex]

2.50 cm/year is equal to 7.93 × 10⁻¹³ kilometers/second.

Answer:

56 J

Explanation:

Step 1: Given data

Step 2: Calculate the work (w) done on the object

We can find the work done on the object using the following expression.

w = F × d × cosθ

where

θ is the angle between F and d

Since F and d occur in the same direction, θ = 0° and cosθ = 1. Then,

w = F × d × 1

w = F × d

w = 7 N × 8 m = 56 J

Answer:

b

Explanation:

The ocean is not a part of Earth's layers.

Answer:

Ocean

Explanation:

Answer:

Incorrect

Explanation:

Mole ratios are derived from the coefficients in front of the number, N2O does not have a 2 in front of it, the real mole ratio would be 4/1

Answer:

Correct

Explanation:

I had the same problem and I put correct, and it was correct.

Answer:

3

Explanation:

Answer:

best guess is polystyrene

Explanation:

Answer:

B. Synthesizing a complex molecule

Explanation:

Hello!

In this case, since catabolic reactions are related to the synthesis of complex biomolecules and metabolic reactions to the breaking down of complex molecules to obtain energy from (say start), we infer that the appropriate answer is:

B. Synthesizing a complex molecule

Because regardless C. also mentions the synthesis of a compound, carbonic acid is not a complex one in comparison to the biomolecules we produce during our cellular cycles.

Best regards!

Answer:

A) Mass = 32 g of KCl

Explanation:

Given data:

Mass of potassium chloride produced = ?

Mass of potassium chlorate = 52 g

Solution:

Chemical equation:

2KClO₃     →       2KCl + 3O₂

Number of moles of KClO₃:

Number of moles = mass/molar mass

Number of moles = 52 g/ 122.55 g/mol

Number of moles = 0.424 mol

Now we will compare the moles of KClO₃ and KCl

             KClO₃      :       KCl

               2            :       2

          0.424         :       0.424

Mass of KCl:

Mass = number of moles × molar mass

Mass = 0.424 mol × 74.55 g/mol

Mass = 32 g

Explanation:

Nucleic acids are the most important macromolecules for the continuity of life. They carry the genetic blueprint of a cell and carry instructions for the functioning of the cell.

Answer:

24.9%

Explanation:

According to this question, mole fraction of NaCl in an aqueous solution is 0.0927. This means that the mole percent of NaCl in the solution is:

0.0927 × 100 = 9.27%

Let's assume that the solution contains water (solvent) + NaCl (solute), hence, the mole fraction of water will be;

100% - 9.27% = 90.73%

THEREFORE, it can be said that, NaCl contains 0.0927moles while H2O contains 9.073moles

N.B: mole = mass/molar mass

Given the Molar Mass

NaCl: 58.44 g/mol

H2O: 18.016 g/mol

For NaCl;

0.0927 = mass/58.44

mass = 0.0927 × 58.44

5.42g

For H2O;

9.073 = mass/18.016

mass = 9.073 × 18.016

= 16.35g

Total mass of solution = 16.35g + 5.42g = 21.77g

Mass percent of NaCl = mass of NaCl/total mass × 100

% mass of NaCl = 5.42g/21.77g × 100

= 0.249 × 100

= 24.9%

Answer:

24.9

Explanation:

Answer:

Weather is at a specific place and time. Climate is over a period of time.

Explanation:

That is the difference

Answer:

d. 9.95 × 10⁻³ mol

e. 249 g

f. 2.55 × 10²⁴ atoms

g. 4.32 × 10²² atoms

Explanation:

d. the number of moles of cobalt represented by 5.99 x 10²¹ cobalt atoms

We will use Avogadro's number: there are 6.02 × 10²³ atoms of cobalt in 1 mole of atoms of cobalt.

5.99 x 10²¹ atoms × 1 mol/6.02 × 10²³ atoms = 9.95 × 10⁻³ mol

e. the mass of 4.23 mol of cobalt

The molar mass of cobalt is 58.93 g/mol.

4.23 mol × 58.93 g/mol = 249 g

f. the number of cobalt atoms in 4.23 mol of cobalt

We will use Avogadro's number: there are 6.02 × 10²³ atoms of cobalt in 1 mole of atoms of cobalt.

4.23 mol × 6.02 × 10²³ atoms/1 mol = 2.55 × 10²⁴ atoms

g. the number of cobalt atoms in 4.23 g of cobalt

First, we will calculate the moles of cobalt using the molar mass of cobalt.

4.23 g × 1 mol/58.93 g = 0.0718 mol

Then, we will calculate the number of cobalt atoms using Avogadro's number.

0.0718 mol × 6.02 × 10²³ atoms/1 mol = 4.32 × 10²² atoms