read position, or c. The next item to be read from the file is indicated by the read position.
The read position, also referred to as the file pointer, is a value that identifies where the following read operation will take place within a file. The read position is normally set to the file's beginning when it is opened. The read position is moved to the following location in the file as data is read from it, indicating where the following item will be read.
As a result, the programme is able to read data sequentially from the file, one item at a time, until it reaches the file's conclusion. A crucial idea in file handling is the read position, which enables the programme to maintain track of its location in the file and read data.
learn more about read position here:
https://brainly.com/question/29579195
#SPJ11
a typical data communication system includes all of the following components except:a. sender and receiver devicesb. modems or routersc. communication medium (channel)d. a local area network
Option d, "a local area network," is incorrect. A typical data communication system includes a local area network (LAN) as one of its components.
A LAN is a network of interconnected devices, such as computers, printers, and servers, within a limited geographic area, such as an office or building. The other components of a data communication system include sender and receiver devices, modems or routers, and communication medium (channel). The sender device is responsible for transmitting data, while the receiver device is responsible for receiving and interpreting the data. Modems or routers are used to convert signals from one form to another, and the communication medium (channel) is used to transmit data between sender and receiver devices.
To know more about local area network,
https://brainly.com/question/15227700
#SPJ11
The NetBIOS service uses port ____.
a. 110 c. 135
b. 119 d. 139
The NetBIOS service uses port 139. NetBIOS (Network Basic Input/Output System) is a legacy networking protocol that was originally developed by IBM and later adopted by Microsoft.
It provides a set of services that allow applications on different computers to communicate with each other over a local area network (LAN). NetBIOS provides services such as name resolution, session establishment, and message transfer between computers. It uses a broadcast mechanism to locate other NetBIOS-enabled devices on the same network and allows them to establish a session for communication. However, due to its lack of security and scalability, NetBIOS is no longer recommended for use in modern networks. It has been largely replaced by newer protocols such as TCP/IP, which provide more secure and scalable communication over the Internet. Nevertheless, NetBIOS is still supported in modern Windows operating systems for backward compatibility.
Learn more about NetBIOS here:
https://brainly.com/question/30206139
#SPJ11
In the non-pipelined datapath, for a R-type instruction, the control signals ALUOp and ALUSrc are used in the instruction's 3rd clock cycle, while RegDst and RegWrite are used in the instruction's 5th clock cycle.
True
False
False. In the non-pipelined data path, control signals are typically used in a single clock cycle on execute an instruction.
The timing of specific signals may vary depending on the specific design of the data path, but it is not typical for different control signals to be used in different clock cycles for a single instruction.
False. In a non-pipelined data path for an R-type instruction, the control signals ALUO p and ALUS r c are used in the 2nd clock cycle, while Reg D s t and Reg Write are used in the 3rd clock cycle.
This statement is partially correct but incomplete.
In a non-pipelined data path, the data path performs one instruction at a time, without overlapping the execution of different instructions. For an R-type instruction, which involves a register-to-register operation, the data path performs the following steps:
Instruction Fetch (IF): The instruction is fetched from memory and loaded into the instruction register.
Learn more about non-pipelined here;
https://brainly.com/question/31497064
#SPJ11
5.3.1
5.3.2
چلا
PRA
Name the technology that is represented by the diagram above.
What do the arrows in the diagram represent?
(1)
A flowchart is a visual representation of a process that uses symbols to show the sequence of steps and decisions needed to complete a task.
What are the symbols used?The symbols typically include shapes like rectangles, diamonds, and circles, each representing a different type of action. Arrows are used to indicate the direction of flow between the symbols, showing how the process progresses from one step to the next.
Flowcharts are commonly used in computer programming, engineering, and business to help visualize and analyze complex processes and identify areas for improvement or optimization. They can also be used to help explain complex ideas or concepts in a more accessible way.
Read more about flowcharts here:
https://brainly.com/question/6532130
#SPJ1
For a policy to have any effect, what must happen after it is approved by management? What are some ways to accomplish this?
For a policy to have any effect, it must be communicated and enforced by management. Ways to accomplish this include training, audits, and disciplinary actions.
Simply approving a policy is not enough to ensure that it has any real effect. To be effective, the policy must be communicated clearly to all relevant parties and enforced consistently by management. This can be accomplished through a variety of means, including training sessions, regular audits to ensure compliance, and disciplinary actions for violations. Additionally, it may be helpful to provide incentives or rewards for compliance, as this can help to reinforce the importance of the policy and encourage employees to take it seriously. Ultimately, the key to ensuring the effectiveness of a policy is to make sure that everyone understands it and is held accountable for following it.
Learn more about policy here;
https://brainly.com/question/31465168
#SPJ11
in order, the three-step process of using a file in a c program involves: group of answer choices name the file, open the file, delete the file open the file, read/write/save data, close the file create the file contents, close the file, name the file none of these insert a disk, open a file, remove the disk
The three-step process of using a file in a C program involves:
1. naming the file,
2. opening the file, and
3. reading/writing/saving data and closing the file.
First, the programmer must name the file to be used, which involves choosing a file name and a file path. Next, the file must be opened using the appropriate function and mode (read, write, or append).
Finally, the programmer can read data from or write data to the file, and then close the file when finished to release the system resources it was using.
It is important to handle any errors that may occur during this process, such as if the file is not found or if there are permissions issues.
For more questions like Data click the link below:
https://brainly.com/question/10980404
#SPJ11
what is a relational database? understand the meaning of the following terms in relational database context: records, attributes, fields. what are the requirements for a table in a relational database?
A relational database is a type of database that organizes data into tables with columns and rows. In this type of database, each table represents a specific entity or concept, and each row in the table represents a single instance of that entity.
Records in a relational database are individual rows within a table. Each record contains information about a specific instance of the entity represented by the table.
Attributes and fields are often used interchangeably in the context of relational databases. They both refer to the individual columns within a table that contain specific types of data. For example, a customer table might have attributes/fields for the customer's name, address, and phone number.
To create a table in a relational database, there are certain requirements that must be met. First, each table must have a unique name that accurately represents the entity it represents. Second, each column in the table must have a unique name and data type that accurately represents the attribute/field it contains. Third, each table must have a primary key, which is a column or set of columns that uniquely identifies each record in the table. Finally, there must be a relationship established between tables through the use of foreign keys, which allow data to be connected and shared between tables.
Overall, a relational database provides a powerful and flexible way to organize and manage complex data. By using tables, records, attributes/fields, and relationships between tables, relational databases can handle large amounts of data while maintaining accuracy, consistency, and efficiency.
To know more about relational database visit:
https://brainly.com/question/30011241
#SPJ11
When you construct a ____, you review the use case and identify the classes that participate in the underlying business process.
A) class diagram
B) sequence diagram
C) use case schematic
D) DFD
When you construct a sequence diagram, you review the use case and identify the classes that participate in the underlying business process.
When you construct a B) sequence diagram, you review the use case and identify the classes that participate in the underlying business process. A sequence diagram helps visualize the interactions between the classes over time, making it easier to understand the overall flow of the system.
When you create a use case diagram, the first step is to identify the system boundary, which is represented by a rectangle, Attributes are characteristics that describe the object.
To know more about system click here
brainly.com/question/30146762
#SPJ11
Assuming the network is indicated by the default portion of the IP address, which three of the following IP addresses belong to the Class A network 114.0.0.0? (Select three.)
114.122.66.12
115.0.0.66
114.0.0.15
115.88.0.55
114.58.12.0
The three IP addresses that belong to the Class A network 114.0.0.0 are 1. 114.122.66.12, 3. 114.0.0.15, and 5. 114.58.12.0
To determine which three IP addresses belong to the Class A network 114.0.0.0, we'll look at the first octet of each address.
Here are the given IP addresses:
1. 114.122.66.12
2. 115.0.0.66
3. 114.0.0.15
4. 115.88.0.55
5. 114.58.12.0
Class A networks have a first octet range of 1-126. Since the network in question is 114.0.0.0, we're looking for IP addresses that have a first octet of 114. So, the correct options are 1. 114.122.66.12, 3. 114.0.0.15, and 5. 114.58.12.0.
You can learn more about IP addresses at: brainly.com/question/16011753
#SPJ11
an ad that runs on multiple networks at the same time is called a(n) ________.
An ad that runs on multiple networks at the same time is called a cross-network ad.
Cross-network advertising allows advertisers to reach a broader audience across different platforms and networks, such as television, social media, search engines, and websites. By running ads on multiple networks simultaneously, advertisers can increase their reach and frequency, and potentially improve their return on investment (ROI) by targeting different demographics and interests. Cross-network ads can be delivered in various formats, such as banner ads, video ads, sponsored content, or native ads, depending on the type of network and audience being targeted.
Learn more about networks here:
https://brainly.com/question/4438295
#SPJ11
A program is used to assign processes to each of the processors. Which of the following describes how the program should assign the four processes to optimize execution time?
Processes W and Z should be assigned to one processor and processes X and Y should be assigned to the other processor.
Why?
Execution time is optimized when the workload of the two processors is as close to equal as possible so that one processor does not finish too early and has to wait for the other processor to finish. The closest-to-equal workloads are achieved by assigning processes W and Z to one processor (taking 70 seconds) and assigning processes X and Y to the other processor (taking 75 seconds). Using this solution, all four processes will finish executing in 75 seconds.
The program should allot W and Z to a single processor, and X and Y to the other processor - to maximize efficacy.
Why would the program do this?This is because together binding two tasks with equivalent execution times may confine idle time and ascertain that both processors are in sync with working to finish their allocated activities expeditiously, thereby rapidly diminishing general execution time.
In this situation, processes W and Z take 70 seconds to wrap up, whereas X and Y take 75 seconds to finish.
Thus, distributing processes W and Z to one processor, while parcelling out processes X and Y to the other processor will befit the workload proportionally between the two processors as much as achievable and enhance the execution time, producing all four processes finalizing in 75 seconds.
Read more about programs here:
https://brainly.com/question/26134656
#SPJ1
The ____ relies on the OS of the attacked computer, so it's a little more risky to use than the SYN scan.
a. NULL scan c. XMAS scan
b. connect scan d. ACK scan
The XMAS scan relies on the OS of the attacked computer, so it's a little more risky to use than the SYN scan.
The XMAS scan is a type of port scan used in network reconnaissance to identify open ports on a target system. It works by sending TCP packets with the FIN, URG, and PUSH flags set to the target ports. If the port is open, the target system's response will vary depending on its operating system. However, the XMAS scan is considered more risky than other types of scans, such as the SYN scan, because it can crash some systems or trigger intrusion detection systems. Additionally, some modern operating systems may not respond to XMAS scans, making them ineffective. As with any type of network reconnaissance, it's important to obtain proper authorization and follow ethical guidelines to avoid legal issues.
learn more about SYN scan here:
https://brainly.com/question/9082838
#SPJ11
Why is it hard for an ethical hacker to avoid breaking any laws?
As an ethical hacker, it can be challenging to avoid breaking any laws because the activities involved in hacking, such as scanning networks, testing software, and exploiting vulnerabilities, may be prohibited by the law.
Moreover, hacking may violate terms of service or contracts that are legally binding. Additionally, some hacking techniques may unintentionally disrupt systems or cause damage, leading to potential liability issues. Therefore, ethical hackers need to be well-versed in the laws and regulations governing their activities and should take appropriate measures to ensure compliance such as obtaining permission from system owners and using only approved tools and methods.
In short, ethical hacking requires a deep understanding of the legal framework and responsible behavior to avoid any legal issues.
Learn more about ethical hacker: https://brainly.com/question/24119349
#SPJ11
Examine each attack vector and determine which is most vulnerable to escalation of privileges.A. SoftwareB. Operating System (OS)C. ApplicationsD. Ports
The most vulnerable attack vector for the escalation of privileges is the Operating System (OS). While all attack vectors pose a potential risk.
the OS is the most critical component of a system and is responsible for managing all other software and applications. A successful attack on the OS can provide the attacker with elevated privileges, allowing them to access sensitive data and control system resources. Therefore, it is crucial to ensure that the OS is kept up-to-date with the latest security patches and that strong security measures are in place to protect against potential attacks. An operating system (OS) is software that manages computer hardware and software resources and provides services for computer programs. It is the interface between the user and the computer hardware, enabling users to interact with the computer and run various applications. Examples of OS include Windows, macOS, and Linux.
Learn more about operating system here:
https://brainly.com/question/18095291
#SPJ11
How far away must spoil be placed away from an excavation
The distance that spoil (excavated material) must be placed away from an excavation depends on several factors, including the type of soil, the depth and width of the excavation, and any applicable regulations or guidelines. In general, spoil should be placed at a safe distance away from the excavation to prevent it from falling back into the excavation or causing a collapse.
As a general rule of thumb, spoil should be placed at least 2 feet away from the edge of the excavation for every 5 feet of depth. For example, if the excavation is 10 feet deep, the spoil should be placed at least 4 feet away from the edge of the excavation. This distance can be increased based on the type of soil and the width of the excavation. It's important to note that regulations and guidelines for excavation safety may vary by location, and it's important to follow local guidelines and regulations when determining the appropriate distance for placing spoil away from an excavation.
Learn more about excavated material here:
https://brainly.com/question/27815608
#SPJ11
3001 will be waiting at the PC's input to be written on the next rising clock edge.
True
False
The statement "consider a rising clock edge that causes 3000 to be written into the PC. 3001 will be waiting at the PCs input to be written on the next rising clock edge" is true because the PC (Program Counter) is a register that holds the memory address of the next instruction to be executed.
When a statement mentions that a value, such as 3001, will be waiting at the PC's (Program Counter's) input to be written on the next rising clock edge, it implies that the value is ready to be processed during the next clock cycle.
A rising clock edge is the moment when the clock signal transitions from a low to a high state, indicating the beginning of a new clock cycle. In this case, the value 3001 will be written into the Program Counter during the next rising clock edge, making the statement true.
consider a rising clock edge that causes 3000 to be written into the PC. 3001 will be waiting at the PCs input to be written on the next rising clock edge. True or false.
Learn more about clock edge https://brainly.com/question/29998961
#SPJ11
MPI programs can suffer from indeterminacy.true/false
True. MPI programmes are susceptible to indeterminacy, which implies that depending on variables like the quantity of processes, communication patterns, and timing of events, the order of execution and output may change.
True. MPI (Message Passing Interface) programs can suffer from indeterminacy, which means that the order of execution and output may vary depending on factors such as the number of processes, communication patterns, and timing of events. This is because MPI programs involve multiple processes communicating with each other, and the timing and order of these communications can be affected by factors such as network latency and hardware performance. As a result, the behavior of MPI programs can be difficult to predict, and it is important for developers to carefully design and test their code to minimize indeterminacy and ensure correct results.
Learn more about MPI programs can suffer from indeterminacy here.
https://brainly.com/question/16254673
#SPJ11
A relatively new form of citizen participation, ______, allows citizens to access government agencies and their policies through various Web sites.
E-participation allows citizens to access government agencies and policies through various websites. It is a relatively new form of citizen participation facilitated by technology.
E-participation refers to the use of digital technology to enhance citizen participation in government decision-making processes. It allows citizens to interact with government agencies and participate in public policy discussions through various online platforms, such as social media, forums, and e-petitions. E-participation aims to increase transparency and accountability in government, as well as to foster greater citizen engagement and collaboration. By leveraging technology to enhance citizen participation, e-participation has the potential to promote more inclusive and democratic decision-making processes.
Learn more about websites here:
https://brainly.com/question/19459381
#SPJ11
What is the most important hardware component in virtualization?A.RAMB.Disk storageC.VideoD.Sound
Among the options given, the most important hardware component in virtualization is RAM (Random Access Memory).
Virtualization software creates virtual machines (VMs) that run on a physical server, and each VM requires a portion of the server's RAM to function. The more RAM a server has, the more VMs it can support, and the better their performance will be. Disk storage and video are also important components, but they primarily affect the storage and display of data within the VM. Sound, on the other hand, is not as critical in virtualization as it is primarily used for user experience and is not directly related to the functioning of the virtual machine.
Learn more Virtualization here:
https://brainly.com/question/31228094
#SPJ11
selecting the smallest element of an array and swapping it with the first entry is an operation in which sorting method?
Selecting the smallest element of an array and swapping it with the first entry is an operation in the selection sort algorithm.
Selection sort is a simple sorting algorithm that works by repeatedly finding the minimum element from the unsorted portion of an array and placing it at the beginning of the array. The algorithm then moves on to the next unsorted element and repeats the process until the entire array is sorted.
The operation of selecting the smallest element and swapping it with the first entry is the first step in the selection sort algorithm. This step places the smallest element in the first position of the array, which is then considered sorted. The algorithm then moves on to the second element and repeats the process to sort the remainder of the array.
While selection sort is a simple algorithm, it is not very efficient for large arrays as it has a time complexity of O(n^2), where n is the number of elements in the array. However, selection sort can be useful for sorting small arrays or as a subroutine in other more complex sorting algorithms.
Learn more about Selection Sort here:
https://brainly.com/question/13161882
#SPJ11
Selecting the smallest element of an array and swapping it with the first entry is an operation in the selection sort algorithm. Selection sort is a simple sorting algorithm .
that works by repeatedly finding the minimum element from the unsorted portion of an array and placing it at the beginning of the array. The algorithm then moves on to the next unsorted element and repeats the process until the entire array is sorted. The operation of selecting the smallest element and swapping it with the first entry is the first step in the selection sort algorithm. This step places the smallest element in the first position of the array, which is then considered sorted. The algorithm then moves on to the second element and repeats the process to sort the remainder of the array.
Learn more about Selection Sort here:
brainly.com/question/13161882
#SPJ11
Microsoft and many tech writers also use the term _______________ installation to define an upgrade.
The term used by Microsoft and many tech writers to define an upgrade installation is "in-place upgrade."
An in-place upgrade refers to the process of upgrading an existing operating system to a newer version while keeping all personal data, applications, and settings intact. This is in contrast to a clean installation, which involves wiping the system and starting fresh with a new operating system. An in-place upgrade can be a convenient option for users who want to upgrade their operating system without having to reinstall all of their programs and files. The term used by Microsoft and many tech writers to define an upgrade installation is "in-place upgrade." However, it can also be a more complex process that may result in issues if not done properly, such as compatibility problems with existing software or drivers.
learn more about Microsoft here:
https://brainly.com/question/26695071
#SPJ11
A static function can only be called from within the same compilation unit (file). true or false
True. A static function is a function that is declared with the keyword "static" before the function name. This means that the function is only visible and accessible within the same compilation unit, which is essentially the same file that the function is defined in.
When a program is compiled, each source file is compiled into its own object file, which contains the compiled code for all of the functions and variables in that file. If a function is declared as static, it is not included in the symbol table that is generated for the object file, which means that it cannot be called from other source files or from outside the program.
Static functions are often used in C and C++ programming to encapsulate functionality within a single file or module. This helps to keep the code organized and reduces the risk of naming conflicts or unintended side effects. However, it also means that static functions cannot be reused or shared across different parts of the program.
In summary, a static function can only be called from within the same compilation unit or file where it is defined. This is because the function is not visible or accessible outside of that file due to its static declaration.
Learn more about Static Function here : brainly.com/question/30400597
#SPJ11
Of the following choices, which action could be most physically harmful to you?
A. Using a computer without a surge protector
B. Force-ejecting a stuck DVD disc using a straightened paper clip
C. Looking into the end of a fiber optic cable
D. Wearing a grounding strap while installing a modem
Answer: A. Looking into the end of a fiber optic cable.
Explanation: Explanation: Never look into a fiber optic cable or any other possible source of laser light. Laser light can damage your eyes and even cause blindness. When working on a computer, you should use a grounding strap to protect the component from ESD damage. Using a computer without a surge protector could end to damage of the computer, but doesn't have any effect on your personal safety. Ejecting an Optical disc with a paperclip is an acceptable way to remove a disc if the drive door wont open.
SQL is an international standard language for processing a database. True False
The statement given "SQL is an international standard language for processing a database." is true because SQL is indeed an international standard language for managing and manipulating a database.
SQL stands for Structured Query Language, and it is used to create, modify, and query databases. SQL is used by almost all relational database management systems (RDBMS) and is essential for managing data stored in these systems. It is a powerful tool for data management, allowing users to easily manipulate data, retrieve information, and modify the structure of a database.
You can learn more about SQL at
https://brainly.com/question/25694408
#SPJ11
With conditional formatting, teachers can alter the cell color based on the value for:
(Select all that apply)
Text
Images
Dates
Numbers
Teachers can change the color of the cell based on the value of dates and numbers, using special formatting.
Teachers can change the color of cells based on the following values using conditional formatting:
1. Date
2. Number
Conditional formatting allows you to change the appearance of the cell (eg. , cell color) is based on the handling of the cell contents. This is often used with dates and numbers to show important information or patterns. However, formatting the picture usually doesn't work with text and images.
Conditional Formatting helps make patterns and patterns in data more visible. To use it, you must create rules to create cells based on their value, such as the monthly temperature data below, where the color of the cells depends on the value of the cells.
Learn more about Formatting:
brainly.com/question/12420521
#SPJ11
How much CPU time is wasted when spin-waiting?
The amount of CPU time wasted when spin-waiting depends on the amount of time it takes for the lock to be released.
Spin-waiting is a busy-waiting technique that involves repeatedly checking a lock in a loop until it becomes available. While this technique can be efficient for short periods of time, it can waste CPU time if the lock is held for an extended period. The amount of time wasted can be significant, especially if multiple threads are competing for the same lock.
In some cases, it may be more efficient to use other synchronization techniques such as blocking or signaling to avoid wasting CPU time. Therefore, it is important to use spin-waiting judiciously and consider the potential trade-offs when choosing a synchronization technique.
You can learn more about CPU time at
https://brainly.com/question/8367506
#SPJ11
True/False : It is often better to use multiple scalar arrays in GPU code than a single array of structs that stores the same data.
True: It is often better to use multiple scalar arrays in GPU code than a single array of structs that stores the same data.
This is because GPUs are designed for efficient parallel processing and accessing scalar arrays can be faster due to improved memory coalescing. An array is a data structure that stores a fixed-size, sequential collection of elements of the same data type. Each element in the array is identified by an index, which is an integer value that represents its position within the array. Arrays can be one-dimensional, two-dimensional, or multi-dimensional, depending on the number of indices required to uniquely identify each element. They are commonly used in computer programming to store and manipulate large amounts of data efficiently. Arrays can be initialized with values at the time of declaration or later using loops or other control structures. In many programming languages, arrays are zero-indexed, which means that the first element has an index of 0.
Learn more about array here:
https://brainly.com/question/30199244
#SPJ11
26. If a member variable is declared __________, all objects of that class have access to the same variable.
A stationary object is in static equilibrium, which is a special state of equilibrium. The metal block of the bench is an example of a static shape. As long as some parts of the body are not damaged, it is in a state of static equilibrium.
If a member variable is declared as "static", all objects of the class can access the same variable.
Statics is the branch of mechanics that deals with stationary objects or forces in equilibrium. Static equilibrium is the state of physics where the resultant force from a system is zero and the components of the system are at rest.
Electrostatics is the branch of physics that studies stationary electricity. A stationary object is in static equilibrium, which is a special state of equilibrium.
The metal block of the bench is an example of a static shape. As long as a part of the body is not damaged, it is in static equilibrium.
Learn more about Static:
brainly.com/question/12977661
#SPJ11
Interface designers can obtain data, called ____ metrics, by using software that can record and measure user interaction with a system.
Answer
aesthetics
relationship
ergonomic
usability
Usability metrics. Usability metrics refer to data that interface designers can gather and analyze to measure how easy it is for users to interact with a system.
These metrics include things like task completion time, error rate, and user satisfaction, among others. By collecting and analyzing usability metrics, designers can identify areas where users may be struggling with a system and make necessary adjustments to improve the overall user experience. Usability metrics can be obtained through software tools that track and measure user interaction with a system, such as a clickstream analysis, heatmaps, and user testing. The use of usability metrics is an important aspect of interface design and can help ensure that systems are both functional and user-friendly.
Learn more about Usability metrics here:
https://brainly.com/question/29897377
#SPJ11
if a speaker is using powerpoints as part of a presentation, which of these guidelines should he or she follow? select all that apply.
If a speaker is using PowerPoint as part of a presentation, guidelines should he or she follow that he or she should keep slides simple and uncluttered, with clear and concise text.
More details of these guidelines should he or she follow is as:
1. Keep slides simple and uncluttered, with clear and concise text.
2. Use high-quality visuals, such as images and charts, to support the speaker's points.
3. Maintain consistency in fonts, colors, and styles throughout the presentation.
4. Use bullet points to summarize key points and make the content easy to follow.
5. Limit the number of slides to avoid overwhelming the audience.
6. Practice the presentation to ensure smooth transitions between slides and effective communication of the content.
By following these guidelines, the speaker can ensure a professional and engaging PowerPoint presentation.
Learn more about guidelines at
https://brainly.com/question/30392490
#SPJ11