Electromyography (EMG) measures muscle response or electrical activity in response to a nerve's stimulation of the muscle. The test is used to help detect neuromuscular abnormalities.
Electromyography (EMG) :
(EMG) detects the electrical activity that occurs when a muscle is stimulated by a nerve. The test is used to identify aberrant neuromuscular function. One or more tiny needles, commonly known as electrodes, are introduced through the skin and into the muscle during the test. An oscilloscope is then used to display the electrical activity that the electrodes picked up (a monitor that displays electrical activity in the form of waves). In order to hear the activity, an audio amplifier is employed. The electrical activity of muscles during rest, a light contraction, and a strong contraction is measured by EMG. At rest, muscle tissue doesn't typically create any electrical signals. A brief period of activity can be seen on the oscilloscope when an electrode is introduced, but there should be no signal beyond that.
To learn more about Electromyography (EMG) refer: https://brainly.com/question/12967168
#SPJ4
The ________-year solar cycle is characterized by a variation in the number of sunspots and a reversal of the polarity of the Sun as a whole.
22 year solar cycle is characterized by a variation in the number of sunspots and a reversal of the polarity of the Sun as a whole.
What are sunspots?
Sunspots are caused by disturbances in the Sun's magnetic field welling up to the Sun's visible surface.
Sunspot are region of the earth that are more darker than other surfaces. They have a reduced temperature.
If sunspots are active, more solar flares will result creating an increase in geomagnetic storm activity for Earth.
Here, the sun's magnetic field changes polarity approximately every 11 years. So, for reversal polarity of the sun, 22 year solar cycle is characterized by a variation in the number of sunspots and a reversal of the polarity of the Sun as a whole.
Learn more about sunspots here:
https://brainly.com/question/18339194
#SPJ4
A radio telescope detects an incoming radio wave which has a power of 1.00 x 10-24 W. If this signal creates a potential of 1.00 nV in the radio receiver, how many electrons move through the receiver circuit per second
Answer:
Therefore, the number of electrons moving through the receiver circuit per second is 6250 electrons/s.
Explanation:
Given:
Power of radio wave, P = 1 × 10⁻²⁴ W
Potential of signal, V = 1 × 10⁻⁹ V
Solution:
Consider the number of electrons flowing through the receiver circuit per second be 'n'.
The current flowing through the circuit will be:
I = P/V
= (1 × 10⁻²⁴ W)/(1 × 10⁻⁹ V)
= 1 × 10⁻¹⁵ A
Then, the number of electrons moving through the receiver circuit can be calculated as:
ne = I
where, e is charge on an electron
I is current flowing through the circuit
Applying values in above equation we get:
n(1.6×10⁻¹⁹ C) = (1 × 10⁻¹⁵ A)
n = (1 × 10⁻¹⁵ A)/(1.6×10⁻¹⁹ C)
n = 6250 electrons/s
Therefore, the number of electrons moving through the receiver circuit per second is 6250 electrons/s.
Learn more about electron flow here:
https://brainly.com/question/6531580
#SPJ4
A plane wave has equation; y= 25sin(120 _4x).find the: (1)wave length (2)wave velocity (3)frequency and period of the wave
(1) The wavelength of the wave is 1.57 m.
(2) The velocity of the wave is 30 m/s .
(3) The frequency of the wave is 19.10 Hz and the time period of the wave is 0.052 s.
Note: The given equation seems to be incomplete. Most probably the equation was y=25sin(120t-4x). And the standard system of units (i.e. kg, m, s) is used.
Wavelength: The distance between the consecutive crest or trough of a wave is called the wavelength of a wave.
The equation of a plane wave oscillating in the y direction and traveling in the x direction is given by the equation,
y=A sin(ωt-kx)
where y is the displacement along the y direction, A is the amplitude of the wave, ω is the angular frequency, t is the time, x is the displacement along the x direction, and k is the wave constant.
The given equation is,
y=25sin(120t-4x)
Comparing this equation with the above equation, following values are obtained.
k= 4 m^(-1)
ω =120 rad/s
A=25
The wavelength λ is given by the formula,
λ=2π/k
Here k = 4 m^(-1), so
λ=2π/4
λ=1.57 m.
Velocity: The velocity of a wave is the product of the frequency and the wavelength.
The velocity v is given by the formula,
v=ω*λ/2π
Here ω=120 rad/s and λ=1.57 m, so
v=120*1.57/2π
v=30 m/s
Frequency: The number of oscillations completed in one second is called the frequency of a wave.
The formula of the frequency is,
f=v/λ
Here v=30 m/s and λ=1.57 m, so
f=30/1.57
f=19.10 Hz
Time period: The time taken to complete one cycle of oscillation is called the time period of oscillation.
The formula to calculate the time period T is,
T=2π/ω
Here ω=120 rad/s, so
T=2π/120
T=0.052 s.
Learn more about velocity of wave.
https://brainly.com/question/25847786
#SPJ4
An important step in science is supporting a theory or idea with data. The questions we ask help determine the type of data we collect. In the warm up, you reviewed the equation to calculate kinetic energy. What question could you ask about kinetic energy which will include the variables that affect i
In order to determine the kinetic energy of a body, it is important to ask about the mass and velocity of the body.
What is kinetic energy?Kinetic energy is the energy a body possesses due to the motion of that body.
The equation to calculate kinetic energy of a body is given as:
[tex]KE = \frac{1}{2}mv^{2}[/tex]
where
m is mass and v is velocityTherefore, it is important to ask what the mass of a body is and the speed at which it is moving in order to determine the kinetic energy of the body.
Learn more about kinetic energy at: https://brainly.com/question/25959744
#SPJ1
A 3600 kg boat is moving with a speed of 2.4 m/s. A much smaller 100 kg jet ski has the same amount of kinetic energy. What is the speed of the jet ski
Answer: A 3600 kg boat is moving with a speed of 2.4 m/s. A much smaller 100 kg jet ski has the same amount of kinetic energy. The is the speed of the jet ski is 14.4 m/s².
Explanation: To find the correct answer to the question given, we need to know more about the Kinetic energy.
What is kinetic energy?It is the form of mechanical energy possessed by a body by virtue of its motion. The expression for kinetic energy of a body of mass m having velocity v can be written as,[tex]KE=\frac{1}{2} mv^2[/tex]
How to solve the problem?Given that the kinetic energy of both the boat and the jet are equal.Let, mass and velocity of the boat will be m1 and v1 and mass and velocity of the jet will be m2 and v2, then,[tex]\frac{1}{2}m_1v_1^{2} =\frac{1}{2}m_2v_2^2\\ Thus, \\v_2^2=\frac{m_1v_1^{2}}{m_2} =207.36\\v_2^2=14.4 m/s^2[/tex]
Thus, we can conclude that, the is the speed of the jet ski is 14.4 m/s².
Learn more about the Kinetic energy here:
https://brainly.com/question/28020510
#SPJ4
A 50 mW laser beam is polarized horizontally. It then passes through two polarizers. The axis of the first polarizer is oriented at 30 degrees from the horizontal, and that os the second is oriented at 60 degrees from the horizontal. What is the power of the transmitted beam
The power of the transmitted beam is 28.1*10^-3.
The wireless strength consortium turned into installed in 2008 to expand interoperable standards across producers. Its Qi inductive power standard published in August 2009 enables high-performance charging and powering of portable gadgets of up to five watts over distances of four cm (1.6 inches).
Electricity transmission is the motion of power from its region of technology to a region wherein it is implemented to perform beneficial paintings. Power is defined officially as units of electricity consistent with units of time.
Learn more about the power of the transmitted beam here brainly.com/question/15691460
#SPJ4
A Toddler got up from a nap and ran for 7.0 seconds and got tired and stopped on the spot. from beginning to end she was accelerating at 0.24m/s^2. What has her change in velocity in metres per second
The toddler's change in velocity in metres per second is 1.68 m/s
To answer the question, we need to know what acceleration is
What is aceleration?Acceleration is the change in velocity of an object with time. It is given by
a = Δv/Δt where
Δv = change in velocity and Δt = change in time The toddler's change in velocityMaking Δv subject of the formula, we have
Δv = aΔt
Since the toddler's accleration is 0.24 m/s² and got up from a nap and ran for 7.0 seconds,
a = 0.24 m/s² and Δt = 7.0 sSubstituting the values of the variables into the equation, we have
Δv = aΔt
Δv = 0.24 m/s² × 7.0 s
Δv = 1.68 m/s
So, the toddler's change in velocity in metres per second is 1.68 m/s
Learn more about velocity here:
https://brainly.com/question/25749514
#SPJ1
9) 25cm³ of a liquid x of density 1.2g/cm³ is mixed with liquid of volume 30 cm³ and 0.9g/cm³ without change in volume. Calculate density of the mixture.
Answer:
0.545g/cm OR 545kg/m(both answers are in cubic)
Explanation:
first we have to find mass of liquid x
mass= density × volume
=25 cubic centimetre × 1.2g/cm
=3g
liquid y= density × volume
=30 cubic centimetre × 0.9g/cm
= 27g
next,we add the two masses
27+3
30g(mass of the whole mixture)
formula for finding density of the mixture
Mass1+ Mass2 ÷ Volume 1+ volume 2
30g ÷55 cubic centimetre
the answer will be a recurring decimal and as we know,we write decimals in 3 significant numbers so we round off
0.5454g/cm= 0.545g/cm and in SI units it's
545kg per cubic meter
If a jumper has a vertical leap of 1.54 m on his trial run, what is their takeoff speed and hang time (total time to move upwards to the peak and then return to the ground)?
The jumper's takeoff speed and hang time are equal to 5.50 m/s and 1.12 seconds respectively.
How to calculate takeoff speed and hang time?In this scenario, the takeoff speed is the same as the initial velocity of the jumper and it can be calculated by using the third equation of motion. Also, since the motion is against gravity, the acceleration due to gravity will be negative (g = -9.81 m/s²)
V² = U² - 2gS
U² = V² + 2gS
U² = 0² + 2(9.81)(1.54)
U = √30.22
U = 5.50 m/s.
Next, we would calculate the peak time by using the first equation of motion:
V = U - at
0 = 5.5 - 9.81t
9.81t = 5.5
t = 5.5/9.81
t = 0.56 seconds.
Mathematically, the hang time is double the peak time:
Hang time = 2 × 0.56
Hang time = 1.12 seconds.
Read more on hang time here: https://brainly.com/question/14902568
#SPJ1
A book placed on a table does not move identify the forces in action and identify why the book foes not move
Answer:
See below
Explanation:
There is the normal force of the book on the table.....the table exerts the same force ( upwards) on the book.
All of the forces result in a net zero force on the book so it does not move (there are no horizontal forces on the book)
A negatively charged rod is brought rear the cap of a leaf electroscope. The cap is then earthed momentarily by touching with the finger. Finally the rod is withdrawn. The electroscope is found to be positively charged. Explain.
A gold leaf electroscope's cap develops a negative charge when a negatively charged rod is brought close to it; the case is then grounded, creating a negative charge in the leaf. Option D is correct.
What is the charge?When the matter is put in an electromagnetic field, it has an electric charge, which causes it to experience a force. A positive or negative electric charge can exist.
Similar charges repel each other, whereas dissimilar charges attract each other.
The term "neutral" refers to an item that has no net charge. A charge is something experienced as a force in the electric and magnetic fields.
When a negatively charged rod is brought near the cap of a gold leaf electroscope whose case ad then is earthed, then the leaf has an induced negative charge.
Hence option D is correct.
To learn more about the charge, refer to the link;
https://brainly.com/question/24391667
#SPJ1
In the four terrestrial planets, the densest, heaviest materials are at the center and not evenly distributed throughout the planet. Scientists interpret this observation to mean that:
The question is incomplete. Please read below the missing content.
B) The 4 terrestrial planets have to as soon as were hot sufficient to be molten (like a liquid).
Terrestrial planets may be described as any planet of the sun machine or any exoplanet that is "Earth-like" in the experience that it is composed primarily of metals and rock, in evaluation to a planet that's a fuel large.
In the sun machine, the terrestrial planets are the inner planets closest to the solar, i.e. Mercury, Venus, Earth, and Mars.
Scientists believe that the densest, heaviest substances are at the center and not evenly allotted can be due to the truth that they need to once be warm enough to be molten. In this example, density will take region, making the heavier below and the lighter on the pinnacle.
In the four terrestrial planets, the densest, heaviest materials are at the center and not evenly distributed throughout the planet. Scientists interpret this observation to mean that:
a.the four terrestrial planets must once have been inside the Sun
b.the four terrestrial planets must once have been hot enough to be molten (like a liquid)
c.the four terrestrial planets must have formed where Jupiter and Saturn now are
d.the four terrestrial planets must have collided with each other many times
e.none of the above
Learn more about terrestrial planets here https://brainly.com/question/11862047
#SPJ4
As a sample of water is heated, the energy is used to overcome the attractions between the molecules so that they begin to move past one
another. Then, the kinetic energy of its molecules increases. Which sections
of the heating curve illustrate this process?
Answer:
D. A followed by B
Explanation:
You can see at section A solid Ice at temperature 0°C gets heated up for and all the energy generated from heating up the ice is used to break the bonds which holds the ice together as a solid .
while at Section B the liquid water at 100°C changes to vapor because the heat energy applied here breaks intermolecular bonds c.
The section where A is followed by C of the heating curve illustrate this process. The correct option is D.
What is heating curve?The heating curve represents the association between the supply temperature of the heating system and the external air temperature.
As can be seen in section A reliable Ice at 0°C is heated, and all of the energy generated by heating the ice is used to shatter the bonds that hold the ice together as a solid.
While in Section B, liquid water at 100°C transforms to vapor because the heat energy applied here shatters the intermolecular bonds c.
Thus, the correct option is D.
For more details regarding heating curve, visit:
https://brainly.com/question/10481356
#SPJ2
difference between mechanical watch and quartz watch
Answer:
Mechanical vs. Quartz Watch Movements
Mechanical watch movements are powered by gears and springs. They're autonomous little machines without the need for electric power sources, whereas quartz watches are powered by batteries that vibrate little crystals.
How does the meaning of the word isometric relate to determining if an isometric transformation occurred?.
In an isometric transformation, the shape does not change size.
What is isometric transformation?A shape-preserving transformation (movement) in the plane or in space is called an isometric transformation (or isometry). The isometric transformations include translation, rotation, and combinations thereof, such as the glide, which combines a translation with a reflection.
A stiff transformation called an isometry keeps perimeter and area constant while preserving length and angle measurements.
As a result, while dilations are not isometric since the image and preimage are comparable figures rather than congruent figures, translations, reflections, and rotations are.
To know more about isometric transformation refer to: https://brainly.com/question/110297
#SPJ4
A 110-kg horizontal beam is supported at each end. A 320-kg piano rests a quarter of the way from one end. What is the vertical force on each of the supports
Vertical force on left support = 2891 N
Vertical force on right support = 1323 N
Let's assume the Length of the horizontal beam = L(see diagram)
Mass of beam (m) = 110kg
Mass of piano(M) = 320kg
Weight of the Horizontal beam(W1) =mg = 110×9.8= 1078N
Net force acting on the beam =0
[tex]F_{L}[/tex] - Mg - mg + [tex]F_{R}[/tex] = 0
[tex]F_{L}[/tex] = Force support to the left
[tex]F_{R}[/tex] = Force support to the right
τ = F×r where, τ= Torque
Net torque is also 0
[tex]F_{R}[/tex]L - Mg[tex]\frac{L}{4}[/tex] - mg[tex]\frac{L}{2}[/tex] =0
[tex]F_{R}[/tex] = ([tex]\frac{M}{4} + \frac{m}{2}[/tex])g = 1323 N
[tex]F_{L}[/tex] = (M + m)g - [tex]F_{R}[/tex] = 2891 N
Hence Vertical force on left support is 2891 N and on right support is 1323 N
Learn more about Force & Torque here https://brainly.com/question/19712713
#SPJ4
only question no.2 pls it's very urgent.
Scurvy and rickets are micronutrient deficiency diseases due to a lack of certain vitamins or minerals in the diet. Scurvy is caused by vitamin C deficiency and rickets by vitamin D.
What are proteins and carbohydrates?Proteins and carbohydrates are the macronutrient in the body and are sources of energy. Proteins are made of amino acids linked together by the peptide bond and carbohydrates are made of carbon, oxygen, and hydrogen. Breathing is a biological process that involves exhalation and inhalation, while respiration is a chemical process that occurs in body cells and tissues. The cerebrum and cerebellum are the parts of the brain involved with different functions. The cerebrum of the forebrain is involved with mental, motor, and sensory functions, while the cerebellum is involved with posture, balance, and coordination. The infectious disease gets transmitted to another person by viruses, bacteria, fungi, etc., and non-infectious are non-communicable disease that includes age, deficiency, etc.Learn more about proteins and carbohydrates, here:
https://brainly.com/question/4932822
#SPJ1
If for a given pair of media CR
, CY
and CB
are the critical angles for red, yellow and blue colours respectively,
then
CR < CY < CB
Which factors affect the critical angle for a given pair of media?The factors which affect the critical angle are
(a) The colour (or wavelength) of light
(b) The temperature
(i) Effect of colour of light: The critical angle for a pair of media is less for the violet light and more for the red light. Thus the critical angle increases with the increase in wavelength of light.
(ii) Effect of temperature: The critical angle increases with increase in temperature because on increasing temperature of medium, its refractive index decreases.
According to the question,
μ 1 sinCR =1
μ 2 sinCY =1
μ 3 sinCB =1
μ 1 > μ 2 and μ 2 > μ 3
⟹μ 1 > μ 2 > μ 3
CR < CY < CB
Thus,
The critical angle increases with the increase in wavelength of light.
Learn more about wavelength of light here:
https://brainly.com/question/27557868
#SPJ1
When a planet temporarily moves westward in the sky over the course of several weeks or months (instead of eastward, as it typically does), we call it:
When a planet temporarily moves westward in the sky over the course of several weeks or months (instead of eastward, as it typically does), we call it retrograde motion.
In astronomy, retrograde motion refers to a body's actual or apparent motion in the opposite direction from the majority of solar system objects or other astronomical systems having a favored direction of motion.
Planets usually appear to migrate eastward when compared to the fixed stars.
However, on occasion, they appear to briefly stall in their eastward travel and then migrate westward (backward) in front of the stars for a few months.
They then pause once again. They resume their eastward movement after that.
This motion is known as retrograde motion and sometimes it is just an illusion.
Hence, when a planet temporarily moves westward in the sky over the course of several weeks or months (instead of eastward, as it typically does), we call it retrograde motion.
Learn more about Retrograde motion here https://brainly.com/question/22921263
#SPJ4
why new zealand and sydney celebrate the new year hours before it is celebrated in india.
Due to geographical location of new zealand and sydney, they celebrate the new year hours before it is celebrated in india.
Why new zealand and sydney celebrate the new year hours before it is celebrated in india?New Zealand and Sydney celebrate the new year hours before it is celebrated in india because of its geographical position close to the International Date Line. New Zealand is considered one of the first countries in the world that welcome the New Year.
So we can conclude that due to geographical location of new zealand and sydney, they celebrate the new year hours before it is celebrated in india.
Learn more about geography here: https://brainly.com/question/12790602
#SPJ1
Two concentric, coplanar, circular loops of wire of different diameter carry currents in the same direction. Describe the nature of the force exerted on the inner loop by the outer loop and on the outer loop by the inner loop.
Answer:
Both will be attractive in nature.
Explanation:
In the given case, the direction of the magnetic field is same in both loops as the direction of the current is same in both loops. When two parallel straight wire carrying current in the same direction are brought close to each other, the force between them is attractive in nature. In the same way, when two coplanar, circular and concentric loops of wire are carrying current in the same direction, the force between them is attractive in nature. It can be checked by using right hand thumb rule.
Check out other explanations.
brainly.com/question/15555539
#SPJ10
A 31.4-kg wheel with radius 1.21 m is rotating at 283 rev/min. It must be brought to a stop in 14.8 s. Find the required average power. Assume the wheel to be a thin hoop.
The average power required to stop the wheel is 2795 Joule.
To find the answer, we need to know about the linear velocity, acceleration and force on the wheel.
What is the angular frequency of the rotating wheel?Mathematically, angular frequency= 2×π×frequencySo, angular frequency= 2×π× 283 rev/min= 2×π×(283/60) rev/s
= 30 rad/s
What's the expression of velocity from angular frequency?Mathematically, angular frequency= velocity/radiusSo, velocity= angular frequency × radius Here, radius of the wheel= 1.21mSo, velocity= 30×1.21 m = 36.3 m/s
What will be the acceleration of the wheel, if the final velocity is zero, initial velocity 36.3m/s and time is 14.8 s?Mathematically, acceleration= changeing velocity/timeHere, changing velocity= 36.3m/s and time = 14.8 sSo, acceleration= 36.3/14.8 = 2.45 m/s²What's the force experienced by the wheel?The force on the wheel= mass× acceleration
= 31.4 × 2.45 = 77 N
What's the average power of the wheel?Mathematically, power= work done / time = force×velocityPower= 77 × 36.3 = 2795 J.Thus, we can conclude that the average power of the wheel is 2795 J.
Learn more about the average power here:
brainly.com/question/19415290
#SPJ4
The great astronomer of ancient times who summarized and improved a system of circles upon circles to explain the complicated motions of the planets (and published the system in a book now called The Almagest) is:
The great astronomer of ancient times who summarized and improved...in a book now called The Almagest) is Ptolemy This is further explained below.
Who is Ptolemy?Generally, Claudius Ptolemy was a Greek mathematician, astronomer, and geographer who lived in the second century CE and is best known for proposing the geocentric model of the cosmos, which was used to explain planetary and stellar movements for the next thousand years.
In conclusion, Ptolemy, the ancient world's preeminent astronomer, compiled and refined a system of circles inside circles to describe the complexities of planetary motion, publishing his work in what is now known as The Almagest.
Read more about Ptolemy
https://brainly.com/question/15075606
#SPJ1
Which of the following phrases best describes the term scientific model?
OA. A physical copy of a scientific object, system, or process
B. The application of scientific knowledge to make predictions about
an object, system, or process
C. An experiment in which variables are controlled
OD. A simplified representation used to explain or make predictions
about something
Sammy Speedy, a 69.5 kg jogger, takes a jog along a walk path. If Sammy expends 1,750.0 J while jogging, how fast is he moving?
The speed of Sammy, given that he expends 1750 J while jogging is 7.1 m/s
Data obtained from the questionMass (m) = 69.5 KgEnergy (E) = 1750 J Speed (v) =?How to determine the speedThe speed of Samnmy can be obtained as illustrated below:
E = ½mv²
1750 = ½ × 69.5 × v²
1750 = 34.75 × v²
Divide both side by 34.75
v² = 1750 / 34.75
Take the square root of both side
v = √(1750 / 34.75)
v = 7.1 m/s
Thus, Sammy is moving with a speed of 7.1 m/s
Learn more about energy:
https://brainly.com/question/10703928
#SPJ1
At what speed should a ball of mass 2 kg be rolled in order to reach the other side of
a 6 m high slope?
A. 12.52 m/s
B. 13.25 m/s
C. 10.84 m/s
D. 15.64 m/s
Answer:
M g H = 1/2 M v^2 potential energy = kinetic energy
v^2 = 2 g H = 2 * 9.80 * 6 = 117.6 m/s^2
v = 10.8 m/s
(C)
Compared with our ancestors, today's energy supply is provided by
solar energy and biomass.
solar energy and Hydro.
fossil fuels and Hydro.
fossil fuels and biomass.
Solar energy and Hydro is the correct option.
Which sources provide energy nowadays?Today's energy supply is provided by solar energy and Hydro as compared to our ancestors because our ancestors have no modern technology to obtain energy from sun and water. They get energy from burning of fossil fuels and biomass.
So we can conclude that solar energy and Hydro is the correct option.
Learn more about energy here: https://brainly.com/question/13881533
#SPJ1
A sky diver, mass 90 kg, reaches a terminal velocity of 60 m/s. What is the approximate magnitude of the force of air resistance?.
Answer:
The approximate magnitude of the force of air resistance is 540 N.
Explanation:
Mature wind waves of one wavelength that form orderly undulations of the ocean surface and often precede a major storm system is known as
Mature wind waves of one wavelength that form orderly undulations of the ocean surface and often precede a major storm system is known as swells.
Meaning of mature wind and waves:
The waves in a fully developed sea outrun the storm that creates them, lengthening and reducing in height in the process.
There are 3 types of wind generated waves:
Capillary wavesGravity wavesSwellswe can say that,
Mature wind waves are known as swell, when they left the formation region.
They have traveled away from where they were raised by the wind, and have to a greater or lesser extent dispersed.
Hence,
Mature wind waves of one wavelength is known as swell.
know more about Mature wind waves here:
https://brainly.com/question/23823354
#SPJ4
two identical springs of spring constant 7580 N/m are attached to a block of mass 0.245 kg. What is the frequency of oscillation on the frictionless floor
The frequency of oscillation on the frictionless floor is 28 Hz.
Frequency of the simple harmonic motion
The frequency of the oscillation is calculated as follows;
f = (1/2π)(√k/m)
where;
k is the spring constantm is mass of the blockf = (1/2π)(√7580/0.245)
f = 28 Hz
Thus, the frequency of oscillation on the frictionless floor is 28 Hz.
Learn more about frequency here: https://brainly.com/question/10728818
#SPJ1