The least number of products the company can have so that at least two products must be stored in the same bin is 850.
What is LCM?The least common multiple, lowest common multiple, or smallest common multiple of two integers a and b, denoted by lcm in arithmetic and number theory, is the smallest positive integer that is divisible by both a and b.
The least common multiple (LCM) of two numbers is the smallest number that is divisible by both numbers. It can also be calculated for two or more numbers. There are several methods for calculating the LCM of a given set of numbers. One of the quickest ways to find the LCM of two numbers is to prime factorize each number, and then multiply the product of the highest powers of the common prime factors by the LCM of those numbers.
In this situation, since there are 50 aisles, 85 horizontal locations in each aisle, the lowest common multiple for 50 and 85 is 850.
Learn more about LCM on:
https://brainly.com/question/284493
#SPJ1
Your consulting firm is asked to design an activated carbon adsorption system to treat contaminated groundwater containing
10mg/L of benzene with a treatment goal of 99% reduction in benzene concentration before injection into groundwater. The extraction well pumps groundwater at
100gpm. The activated carbon removal capacity is expressed as the following Freundlich equation:
q(mg/g)=2C0.2, where C is the concentration (mg/L) of benzene after adsorption equilibrium. (a) What is the amount of activated carbon (kg) needed per day?(428.3 kg)
(b) If the packing density of activated carbon is 1.2 g/cm, how many 55-gallon tanks it would fill? Approximate to the nearest number exceeding the amount of activated carbon required.(∼2tanks)
(a) The amount of activated carbon (kg) needed per day is 4319.327 kg per day.
(b) If the packing density of activated carbon is 1.2 g/cm, no. of 55-gallon tanks it would fill is 18 .
What is activated carbon?An element called activated carbon or activated charcoal has pores that can trap compounds, primarily organic ones, that are present in a gas or liquid. It accomplishes this with such efficiency that it is the purifying agent that people use the most frequently.
Chains of carbon and hydrogen atoms make up the fundamental structure of organic compounds, which are produced by the metabolism of living things. All of the derivatives from the plant and animal kingdoms, including oil and the compounds made from it, are included in this group.
Adsorption is the ability of a solid to hold onto the walls of a moving molecule. Adsorbent refers to the solid, and adsorbate refers to the molecule.
No other single purification method has more applications than activated carbon, which is used to retain solids that are present in a fluid after filtration.
Learn more about activated charcoal
https://brainly.com/question/29548411
#SPJ1
in a jfet, the u- shaped region is called the and is flush with the upper surface of the substrate.
The U-shaped area in a JFET is known as the channel and is flush with the substrate's upper surface.
The concept of a surface as it pertains to mathematics is called a surface. It is a generalization of a plane, just like a curve generalizes a straight line, but unlike a plane, it may be curved. There are a number of more precise definitions, depending on the circumstance and the mathematical techniques used for the study. Planes and spheres are the most fundamental mathematical surfaces in Euclidean 3-space. The specific description of a surface may vary depending on the circumstances. In topology or differential geometry, a surface rarely crosses itself. this is not the case in algebraic geometry. Since a surface is a two-dimensional topological space, a moving point on a surface can only travel in one of two directions.
Learn more about surface from
brainly.com/question/1297098
#SPJ4
Can someone please help me the answer is supposed to be A but I don’t know why
We can see here that the element in the circuit that is possibly a resistor is Element B.
What is a resistor?A resistor actually known to be a electrical component or device that has two terminals through which current enters and leaves. A resistor is known to limit or regulate the flow of electrical current in an electronic circuit. Resistors are known to be used in order to also provide a kind of specific voltage for a device that is active like a transistor.
Resistors are used in electrical and electronics in order to control the flow of current, reduce current, divide voltages, adjust the level of signals and terminate transmission lines. It is used for other purposes in the electronics field.
We see here that element B selected above is a resistor. The arrow on the head is pointing downward which indicates that current is entering.
Learn more about resistor on https://brainly.com/question/13606415
#SPJ1
1.) Unevenly torqued lug nuts could result in:
A. vibration while braking.
B. brake squeal.
C. premature brake pad wear.
D. pull to one side when braking.
Unevenly torqued lug nuts could result in premature brake pad wear. The correct option is C.
What are lug nuts?The hardware used to hold your wheel and tire assembly to your vehicle is known as lug nuts. The suitable lug nut guarantees that your wheel is installed safely and securely. They may be little, but they do a lot of work.
With a missing lug nut, you can drive at legal speeds; however, you should visit your nearest tire shop as soon as possible. Wheel nuts gradually loosen, causing wear on the wheel as it vibrates against the thread of the bolt.
Therefore, the correct option is C. premature brake pad wear.
To learn more about lug nuts, refer to the link:
https://brainly.com/question/20516510
#SPJ1
Accenture is helping a client improve their business agility by reducing time to
market, increasing product quality, and enabling continuous delivery.
The client team responsible for quality checks sometimes takes longer to finish
testing all aspects of their product.
What should Accenture suggest the client do to decrease the testing time?
Utilizing DevOps will help to lengthen the testing process, which improves business agility and raises the caliber of the final product.
What should Accenture suggest the client do to decrease the testing time?Deploying DevOps sooner during the testing process will shorten the testing period.The DevOps platform from Accenture is the best tool for helping teams and individuals choose, assess, develop, and simulate end-to-end testing solutions while also making the most of their time.Time must be used efficiently without losing quality inspections.Software delivery can be made more effective and efficient by interacting, coordinating, integrating, and automating between IT operations and software developers, according to the DevOps IT philosophy.To improve delivery predictability, efficiency, security, and maintainability, DevOps teams prioritize standardizing development environments and automating delivery processes.Automated testing ensures that the code is prepared for deployment.Once the code has passed all automated testing, it is made available to a select number of users.To learn more about Accenture refer
https://brainly.com/question/29509318
#SPJ1
Suppose you are a part of Qatar''''s best software team named "the Photon Intelligence Team" and you are required to set up a detailed alert system to secure the data of all the football fans who are coming to watch football matches.
Metro trains are typically vacant during the day but may be busy at night.
What widespread interest from all throughout the world?But there were doubts about how it'd work in practice and how the city would handle the alleged influx of much more than a million images once the event started.
Michael Edgley, head of the Green and Gold Army, claimed that although some confusing transport management was presenting challenges for tour buses, it was a similar story for his traveling group of Socceroos family and supporters.
Because of the traffic restrictions, walking for fall and pick-ups around the stadiums can be difficult, but for numerous people, it is still the more convenient option.
To know more about the alleged influx visit:
https://brainly.com/question/14299924
#SPJ 1
An environmental engineer wants to examine the permeability of different soils to determine the best natural containment system to protect groundwater from pollutants. The engineer tests four different soil samples, places them into a wet column, and pours 50mL of water over each sample. The engineer records the total amount of water that moves through the column as well as the total amount of time for the water to fully percolate through the soil. The data from the study are shown below.
Which of the following best describes why the engineer chose to calculate the permeability of the soil sample in the experimental design in order to evaluate a natural containment system to protect groundwater?
Note that the best option that describes why the engineer chose to calculate the permeability of the soil sample in the experimental design in order to evaluate a natural containment system to protect groundwater is: "Soils that have low permeability would best help protect groundwater because the soil traps pollutants so that chemical and biological breakdown can occur."
What is Soil Permeability?Soil permeability is a measure of how easily water can move through soil. Permeable soil allows water to pass through it easily, while impermeable soil does not allow water to pass through it easily.
Permeable soil is important because it helps to reduce flooding and erosion, and it can help to recharge groundwater. Impermeable soil can lead to problems such as flooding and erosion.
Permeability conveys information on foundation stability, seepage via embankments, and so on. Shear strength is the most essential geotechnical feature of soils, since it aids in the stability of civil engineering projects on or under the earth's surface.
Learn more about Soil Permeability:
https://brainly.com/question/27626099?
#SPJ1
If the input driver) gear is 30 teeth and the output (driven) gear is 15 teeth, what is the gear
ratio?
0.5 is the gear ratio of the gear having Input 30 teeth and output 15 teeth.
Gear Ratio is Defined as the ratio of the number of Output (driven) to input (Driver) .
Gear Ratio = output /input
The number of rotations of a driven gear to the number of rotations of a driver gear Which means if the gear ratio is 3 the Driven will rotate 3 time if Driver rotates 1 time.
Gear ratio=15/30 = 0.5
Hence 0.5 is the gear ratio of the gear having Input 30 teeth and output 15 teeth. Higher gear ratio will give the better torque and acceleration.
To study more about Gear:https://brainly.com/question/9302478
what is the lighting load on a 120v circuit for six 100w incandescent lights and four fluorescent fixtures with a ballast rating of 1.5a, all operating continuously for 8 hours per day?
Note that the lighting load on a 120v circuit for six 100w incandescent lights and four fluorescent fixtures with a ballast rating of 1.5a, all operating continuously for 8 hours per day is: 10,560 Watts.
What is Lighting Load?A building's lighting loads are sometimes referred to in terms of "Lighting Power Density," which is measured in watts per square foot or square meter.
It is to be noted that a single calculation is used to compute lighting load:
W=VA.
Where
W = Watts
V = Volts; and
A = Amps
To determine the total wattage for the fluorescent fixtures we say:
4 fixtures x 1.5 amps x 120 volts = 720 watts
Next, we add the wattages for the incandescent lights and fluorescent fixtures to get the total wattage for the circuit. That is:
(6 x 100watts) + 720 watts
= 600 watts + 720 watts
= 1,320 watts
Thus the Load is 1,320 watts.
If all lighting will operate continuously for 8 hours/day, then:
Daily energy consumption will be:
1320 x 8
= 10,560 Watts.
Thus, the Lighting Load on a 120v circuit for 6 100w incandescent lights and four fluorescent fixtures with a ballast rating of 1.5a Operating at 8 hours per day is 10,560 Watts.
Learn more about Lighting Load:
https://brainly.com/question/14375425
#SPJ1
technician a says a torsion bar is a type of shock absorber. technician b says shock absorbers slow the upward and downward movement of the vehicle after a bump. who is correct?
A torsion isn't part of the shock absorber. Hence, technician A is wrong and technician B is correct.
The suspension system allows the wheel to up and down over bumps in the road. The suspension system makes the wheels and tires to up and down to absorb the shock from bumps. The rubber tires and air in the tires also slow down the ride over hard surfaces and conform to slightly uneven and rough surfaces. Thus, technician B is correct. Meanwhile, the technician A is wrong because a torsion isn't kind of shock absorber.
Kind of shock absorbers are:
Standard telescopic shocks. Struts. Spring seat.Learn more about shock absorbers, here https://brainly.com/question/10838031
#SPJ4
an ic with a switching rate of and is dissipating . what will be the power dissipation if we change to and the switching rate to while keeping the activity factor the same?
The power dissipated by a specific circuit element is equal to the product of the current and voltage, or P = I V, if a current I passes through that element while a voltage V is lost in the process.
What change to and the switching rate in power dissipation?In other words, the power dissipated across the load will be at its maximum if the value of load resistance is equivalent to the amount of source resistance, or Thevenin's resistance.
Therefore, P = CV2 f, which states that dynamic power dissipation depends squarely on supply voltage and linearly on frequency, results in a cubic reduction in power consumption when both are scaled back.
Learn more about power dissipated here:
https://brainly.com/question/12803712
#SPJ1
how should water be added to a concrete mix
When adding water to a concrete mix, it is important to follow the manufacturer's instructions and use the right amount of water. Too little water can result in a dry, crumbly mix that is difficult to work with, while too much water can weaken the concrete and reduce its strength.
To add water to a concrete mix, follow these steps:
Begin by measuring out the amount of dry concrete mix that you need.Place the dry mix in a clean, dry mixing container, such as a wheelbarrow or cement mixer.Slowly add water to the dry mix, using a hose or watering can.Mix the water and dry mix together until the water is evenly distributed and the concrete reaches a uniform, smooth consistency.Continue to add small amounts of water as needed until the concrete reaches the desired consistency.Once you have added the desired amount of water, continue to mix the concrete for an additional 2-3 minutes to ensure that the water is evenly distributed and the concrete is properly mixed.It is important to note that the exact amount of water needed will vary depending on the type of concrete mix you are using, as well as the weather conditions and the intended use of the concrete. Therefore, it is important to follow the manufacturer's instructions and use the recommended amount of water.
A study was conducted to test the effectiveness of a juggling class. Before the class started, six subjects juggled as many balls as they could at once. After the class, the same six subjects juggled as many balls as they could. The differences in the number of balls are calculated. The differences have a normal distribution. Test at the 1% significance level. (Calculate "after" − "before. ")
There is sufficient evidence to support that juggling class is effective.
How to explain the normal distribution?From the information, a study was conducted to test the effectiveness of a juggling class and before the class started, six subjects juggled as many balls as they could at once
In this case, the standard deviation will be:
= ✓3.5 / n - 1
where b = number
= ✓3.5 / (6 - 1)
= ✓3.5/5
= 0.84
The test statistic will be:
t = d /(sd /✓n)
t = test statistic
sd = standard deviation
n = number
t = 1.5 / 0.84/✓6
t = 4.39
Here, the using a distribution table, the p value is 0.035.
Therefore, we reject the null hypothesis.
Learn more about normal distribution on:
brainly.com/question/4079902
#SPJ1
suppose you are given a steel bar and you cut it in fifths. how does the moment of inertia of one of the pieces compare to that of the original bar? assume rotation about a perpendicular axis through one end of the bars.
The moment of inertia of one piece is 125 times smaller than the moment of inertia of original bar.
What is moment of inertia?A body's resistance to having the speed of its rotation about an axis changed by the application of a torque is measured by the term "moment of inertia" in physics (turning force). The axis could be fixed or not fixed, internal or external.
Nevertheless, the moment of inertia (I), which is always specified in relation to that axis, is calculated as the sum of the products obtained by multiplying the mass of each particle of matter in a given body by the square of that particle's distance from the axis.
The moment of inertia can be compared to mass in linear momentum when calculating the angular momentum of a rigid body.
Learn more about moment of inertia
https://brainly.com/question/14460640
technician a says liquid cooling an engine maintains a constant operating temperature. technician b says that air cooling lets the engine operate more efficiently. who is correct?
Technician A is correct. The liquid cooling an engine maintains a constant operating temperature. Technician B is wrong because the usage of air condition can increase fuel consumption by up to 20%.
Component of systems are a radiator to dissipate heat, a fan or fans to ensure adequate airflow for radiator cooling, a thermostat valve that opens when the desired operating temperature is reached and a water pump (or coolant pump) to circulate coolant through the engine, hoses and other elements. The engine cooling system has responsible for holding it at a stable temperature to avoid damage to the vehicle. There are two kind of cooling systems for engines:
Air cooling system. Water cooling system.Learn more about cooling engine system, here https://brainly.com/question/14557991
#SPJ4
technician a says synchronizers are used to match the clutch and input shaft speeds to provide easier gear changes. technician b says a synchronizer matches gear speed with shaft speed. who is correct?
Technician B is correct.
Since, a synchronizer matches gear speed with shaft speed.It is used for shifting gears while driving. The synchronizer works like a friction clutch, decelerating or accelerating the input shaft to match the speed of the next gear.
What is a synchronizer?
A synchronizer matches the rotational speed of the desired gear to the rotational speed of the output shaft. The gears are constantly meshing.
The shift fork moves the synchronizer's sleeve to lock the spinning gear to the shaft. It makes use of a blocking ring made of brass or soft metal to make contact with the gear's dog teeth.
These brass rings are inexpensive and wear over time, becoming rounded. When the teeth appear worn or rounded, they should be replaced.
The synchronizer blocking ring functions as a clutch, speeding up or slowing down the mating gear to match the output shaft speed.
To know more about Transmission, visit: https://brainly.com/question/27941416
#SPJ4
7.41 two channels are welded to a rolled w section, as shown. determine the moments of inertia and the radii of gyration of the combined section with respect to the centroidal x and y axes.
When the two channels are welded to a rolled w section, the radius of gyration will be,
Radius of the gyration on the X-axis will be -
[tex]K_{X}[/tex] = 4 in
Radius of the gyration on the Y-axis will be -
[tex]K_{Y}[/tex] = 2.54 in
What is Radius of Gyration?
A body's radius of gyration, or gyradius, is always centered on an axis of rotation. It is defined as the spiral distance to a point with a moment of inertia. A rigid body's radius of gyration is a geometric property. Consider the center of mass. It is analogous to the body's actual mass dissemination. If the entire body's mass is concentrated.
In physics, the radius of gyration refers to the technique for dispersing various segments of the item present around an object in material science. The radius of gyration is the perpendicular distance taken from the rotational axis to an explicit point of mass when viewed in terms of the moment of inactivity.
To know more about Radius of Gyration, visit: https://brainly.com/question/15127397
#SPJ4
technician a says that with a manual transmission, output shaft speed and torque can be increased at the same time. technician b says that output shaft speed and torque can be increased, but not at the same time. who is correct?
That is the purpose of a transmission in the first place, but output shaft speed and torque cannot be done at the same time. This is why shifters were created.
What is transmission in vehicle?
A transmission, also known as a gearbox, is the medium that transmits power generated by an engine to the wheels via a mechanical system of gears and gear trains in a car.
A transmission allows a person to control the application of power to a vehicle, without which the car would not move efficiently. Lower gears in a gearbox provide the necessary torque to accelerate, whereas higher gears aid in reaching high speeds by more effectively utilizing the engine's power.
While the function is straightforward, there are various transmissions that aid in the transmission of power.
To know more about transmission, visit: https://brainly.com/question/28449144
#SPJ4
n ideal transformer has 20 turns on its primary side and 90 turns on its secondary side. the primary side has 200 volts and 50 amps. what are the voltage and current on the secondary side
Below is the solution of the voltage and current on the secondary side when an ideal transformer has 20 turns on its primary side and 90 turns on its secondary side.
Step-by-step solution -
Given,
[tex]V_{P} = 200V\\N_{P} = 20\\N_{S} = 90[/tex]
For Transformer -
[tex]\frac{V_{P}} {V_{S}} = \frac{N_{P}} {N_{S}}[/tex]
[tex]\frac{200} {V_{S}} = \frac{20} {90}[/tex]
[tex]V_{S} = \frac{1800}{2} = 900 V[/tex]
For Ideal transformer ,
[tex]P_{OUT} = P_{IN}}[/tex]
200 x 50 = 900 x [tex]I_{S}[/tex]
[tex]I_{S}[/tex] = 100/9 A.
What is an Ideal Transformer?
A perfect transformer is one that has no losses, such as copper or core. This transformer's output power is equal to its input power. This transformer's efficiency is 100%, which means there is no power loss within the transformer.
What is a Transformer?
A transformer is a fixed electrical device that is used to transfer electrical energy between two circuits while maintaining a constant frequency and increasing or decreasing the current or voltage.
To know more about Ideal Transformer, visit: https://brainly.com/question/23870167
#SPJ4
in order to calculate the dispersion of contaminants in a room, one can use a large number of langrangian particles in a random process.TrueFalse
True. The dispersion of contaminants in a room can be modeled using a large number of Lagrangian particles in a random process. In this approach, the movement of each particle is tracked as it moves through the room, and the concentration of contaminants at different points in the room is calculated based on the distribution of the particles. This allows researchers to understand how the contaminants will spread throughout the room and how long they will remain in the air.
Lagrangian particle modeling is a useful tool for predicting the dispersion of contaminants in indoor environments, as it takes into account the influence of the room's geometry and the flow of air within the space. It can be used to evaluate the effectiveness of ventilation systems and to identify potential areas of high contaminant concentrations that may pose a risk to the occupants of the space.
Overall, the use of Lagrangian particles in a random process is a useful technique for understanding the dispersion of contaminants in indoor environments and for identifying strategies to reduce the risks associated with exposure to these contaminants.
Learn more about Lagrangian, here https://brainly.com/question/13195233
#SPJ4
7. geophysical evidence suggests that lineaments in an exploration area may trend 60 degrees west. a. in order to enhance these lineaments, what are the two optimum radar look directions?
60 degrees east or west would be the two optimum radar look directions.
Why 60 degree?The optimum radar look directions for enhancing lineaments that trend 60 degrees west would be 60 degrees east and 60 degrees west.
This is because radar look directions are generally chosen to be perpendicular to the direction of the lineaments, as this allows the radar to "see" the lineaments more clearly and provide better resolution.
In this case, a look direction of 60 degrees east or west would be perpendicular to the lineaments, which would provide the best possible radar imaging of the lineaments in the exploration area.
To Know More About Geography, Check Out
https://brainly.com/question/1462956
#SPJ1
The data model contains the Official entity that has an array key called Reports of the type Report. The Report entity has a typekey field called ReportType (with possible typecodes 'inspection', 'state', 'police'). Given the variable: var thisOfficial : Official Which expression represents the correct approach to retrieve a single array element with ReportType 'police'? thisofficial. Reports.firstwhere(\r→r. ReportType=−ReportType.TC. POLICE) thisofficial.Reports. first(\->r.ReportType=wtypekey. ReportType.TC. POLICE) thisofficial. Reports.hasMatch(\r→rr. ReportType = a typelist. ReportType.TC POLICE) exists (report in thisofficial.Reports where report. Reporttype==typekey.ReportType.TC.POLICE) thisofficial. Reports". ReportType==ReportType. TC POLICE
The expression that represents the correct approach to retrieve a single array element with ReportType 'police' is:
thisOfficial.Reports.hasMatch(\ r -> r.ReportType == typelist.ReportType.TC_POLICE)
What is an array element?Information is stored in arrays. An array is made up of a group of elements used to store data. A scalar integer number called an index, which is assigned to each element in an array, is what makes up the indexing system.
The data size and the data type or data representation of an array's elements must be the same.
On the base address of the array is the first element.
To determine the element's position (or address), which is used to retrieve the element's actual value, three factors must be considered: the base address, the size of the data type, and the index.
Learn more about array
https://brainly.com/question/28565733
#SPJ4
The circuit below is known as a source-follower configuration. It achieves a DC level shift between the input and output. The value of this shift is determined by the current lo. Assumey- 0.4, 2ion-0.6 V, To-0.43 V, k-1 15 pA/V2, and -0. The NMOS device has W/L 5.4/1.2u such that the short channel effects are not observed. a. Derive an expression giving Vi as a function of Vo and Vro. If we neglect body effect, what is the nominal value of the level shift performed by this circuit? The NMOS transistor experiences a shift in Vr due to the body effect. Find Vr as a function of Vo for Vo ranging from 0 to 1.5V with 0.25 V intervals. Plot a curve for VT vs. Vo roughly. b. DD 2.5 V 54112μ 10-35 μΑ
The nominal value of the level shift performed by this circuit is V[tex]_T[/tex] + 0.367 v, where given V[tex]_T[/tex] = 0.43.
The shift in voltage is, ΔV = 0.43 + 0.367 = 0.797.
What is voltage?Voltage is the pressure from the power source of an electrical circuit that pushes charged electrons (current) through a conducting loop, allowing them to perform tasks like lighting a lamp.
In a nutshell, voltage equals pressure and is measured in volts (V). The term honours Italian physicist Alessandro Volta (1745–1827), who developed the voltaic pile, the forerunner of the modern household battery.
Voltage was first referred to as electromotive force in the early history of electricity (emf). For this reason, voltage is denoted by the letter E in equations like Ohm's Law.
Learn more about Voltage
https://brainly.com/question/1176850
#SPJ4
20 Suppoe A Nonlinear Device I Available For Which The Output Current Io And Input Voltage V Are Related
Yes, such a divide could be used for demodulation. To generate AM wave with either carrier frequency Fc, we require a sinusoidal component of frequency FC to be added to the DSB-SC generated.
To achieve this requirement, we may use a configuration involving a pair of non-linear devices and a pair of identical bandpass filters as shown in the above figure.
From this spectrum, we see that in order to extract a DSB-SC wave with carrier frequency FC from i.
We need a bandpass filter with mid-band frequency Fc and band with 2w, the two of which satisfy the requirement FC-1 > fc/2 + 2w ⇒ 6w
To learn more about the output current
https://brainly.com/question/28132691
#SPJ4
a synchronous motor rated at 300kva is to be added to the above load. it is expected to operate at 60% of rated load and an 80% leading power factor. find the total power factor and the real, reactive, and apparent power used by the facility.
The perceived power S is modest when the power factor is close to unity. This indicates that the electrical system's rating is the lowest possible for transmitting a specific active power P to the load.
What power factor and the real, and apparent power?The measurement of how much power is consumed to run machinery and equipment over a specific time period is known as apparent power, sometimes referred to as demand. You may calculate it by multiplying (kVA = V × A).
Therefore, working power (measured in kW) to perceived power (measured in kilovolt-amperes) is known as the power factor (PF) (kVA).
Learn more about power factor here:
https://brainly.com/question/17832655
#SPJ1
What is the current in a circuit if the voltage applied to a load is 492 volts? the connected load contains two series-connected resistive heating elements that are each rated for 2. 8 kw at 250 volts.
The current in the circuit would be approximately 10,958.33 A.
What is Ohm's law?Ohm's law states that the "current in a circuit is equal to the voltage applied to the circuit divided by the total resistance of the circuit".
To solve this problem, we need to first determine the total resistance of the two resistive heating elements in the circuit.
Since the heating elements are connected in series, their resistances add up, so the total resistance of the circuit is
⇒ 2 x 2.8 kW / 250 V = 11.2 kW / 250 V = 0.0448 kW / V.
As per Ohm's law, the current in the circuit would be
⇒ 492 V / 0.0448 kW / V = 10,958.33 A.
Therefore, the current in the circuit would be approximately 10,958.33 A.
To learn more about Ohm's law click here:
https://brainly.com/question/1247379
#SPJ2
4. identify the c-h out-of-plane bending vibrations in the infrared spectrum of 4- methylcyclo- hexene. what structural information can be obtained from these bands?
650 to 1000 cm-1 of out-of-plane C-H bending vibrations.
The C-H stretch is where?Depending on the hydrization, the C-H stretching modes range between 2850 and 3300 cm-1. The peaks from 3000-3100 cm-1 denote an unsaturated system, while the range from 2850-3000 cm-1 refers to saturated systems (alkanes, sp3, for example 1). (alkenes, sp2, example 2; aromatic ring, example 3,4).
What does cyclohexane's IR spectrum look like?In the range of 4000-150 cm-1, the infrared spectra of cyclohexane in both its liquid and vapour phases have been investigated. The Eu skeletal deformation vibration's infrared band was discovered at 248 cm1.
To know more about vibrations visit:-
https://brainly.com/question/20999521
#SPJ4
Although not limited by the NEC, if a 15-amp residential circuit is to be loaded only up to its rating, how many outlets can be put on the 120-volt circuit if the outlets are rated at 120 VA per outlet? Select one: a. 15 b. 1 c. 20 d. 8 e. 9
Although not limited by the NEC, if a 15-amp residential circuit is to be loaded only up to its rating, The number of outlets that can be put on the 120-volt circuit if the outlets are rated at 120 VA per outlet are 15 (Option A).
What is a residential circuit?These are similar to the wire systems in your home, but they can be as large as the power lines outside. Power circuits are required when a considerable volume of electricity has to be transmitted and managed.
The majority of your home's typical 120-volt domestic circuits are (or should be) parallel circuits. Outlets, switches, and light fixtures are connected such that the hot and neutral wires form a continuous circuit pathway separate from the various devices that consume electricity from the circuit.
Learn mroe about the residential circuit:
https://brainly.com/question/13053867
#SPJ1
Lamaellar eutectic solids form because the geometry limits diffusion distances required for solidification of alpha and beta phases. True False
Fals, Diffusion takes place across small distances due to the urgency of the phase shift, creating a fine lamellar microstructure.
The eutectic structure forms for what reason?A lamellar eutectic structure can only form if the interfacial energy between the two solids (S1/S2; S1 and S2 stand for Solid 1 and Solid 2, respectively) is lower than that of S1/Liquid and S2/Liquid. The diffusional partitioning of components results in the formation of eutectic microstructure.
What features distinguish a eutectic structure?A homogenous, solid mixture of two or more materials that forms a super-lattice is referred to as a eutectic system. The mixture either melts or solidifies at a lower temperature than the melting point of any of the constituent materials. The phrase is most frequently used to describe an alloy composition.
To know more about eutectic visit:-
https://brainly.com/question/27886492
#SPJ4
Why does some core analysis reports show depths broken into 1/2 feet and some in whole feet?
Answer:
Core analysis reports often show depths broken into increments of 1/2 feet because it provides a more detailed and accurate representation of the geologic layers present in the subsurface. By breaking the depth into smaller increments, geologists can more accurately depict the thickness and distribution of different geologic units and identify any changes or variations within those units. This can be especially important in cases where the geology is complex or there are small variations in the subsurface that could have significant impacts on the exploration or development of a resource.
In some cases, core analysis reports may show depths in whole feet rather than 1/2 feet. This is usually done when the geology is relatively simple and there are no significant variations within the geologic units being analyzed. In these cases, showing the depths in whole feet may be sufficient to accurately represent the geology and meet the needs of the project.
Ultimately, the decision to show depths in 1/2 feet or whole feet will depend on the specific needs of the project and the complexity of the geology being analyzed. Both approaches can be useful for different purposes and it is important to choose the one that is most appropriate for the task at hand.