A block is initially sliding along a surface of negligible friction with a speed v0. A constant force F0 is then exerted on the block. Which of the following figures represents the situations in which the kinetic energy of the block will initially decrease? Select two answers.AThe figure presents a block on a horizontal flat surface. The block is moving to the right with a velocity v sub 0. A force, F sub 0, points upwards and to the right.BThe figure presents a block on a horizontal flat surface. The block is moving to the right with a velocity v sub 0. A force, F sub 0, points upwards and to the left.CThe figure presents a block on a horizontal flat surface. The block is moving to the right with a velocity v sub 0. A force, F sub 0, points downwards and to the right.DThe figure presents a block on a horizontal flat surface. The block is moving to the right with a velocity v sub 0. A force, F sub 0, points downwards and to the left.

Two things metal and nonmetals have in common are: 1.Metals and nonmetals are elements and thus are made of atoms.

2. The atomic structures of metals and nonmetals are similar as they have a nucleus with orbiting electrons.

The magnitude of the maximum shear stress due to bending. is 1160 kN

Shear stress, frequently denoted through τ, is the component of pressure coplanar with a fabric move segment. It arises from the shear force, the component of the pressure vector parallel to the fabric move segment.

Shear strain is the force tending to motive deformation of fabric by means of slippage along a plane or planes parallel to the imposed strain. the resultant shear is of brilliant significance in nature, being in detail associated with the downslope movement of earth materials and to earthquakes.

The shear stress is defined to be the ratio of the tangential pressure to the move sectional location of the floor upon which it acts.

Calculation:-

Shear stress = Vmax / d

                       =  580kN / 0.5

                       = 1160 kN

Learn more about shear stress here:- https://brainly.com/question/20630976

#SPJ4

Betelgeuse is a very large/bright star located about 500 light years away. if a similar star is located at 2000 light years away, its relative brightness is 1/16, option (a) is correct, compared to Betelgeuse.

The brightness of a star, as seen from Earth, is determined by its luminosity (the amount of energy it emits) and its distance from Earth. As a star gets further away, its apparent brightness (the amount of light it appears to emit) decreases. To compare the relative brightness of two stars, you can use the inverse square law, which states that the intensity of a point source of light (such as a star) is inversely proportional to the square of the distance from the source. In other words, if a star is located twice as far away as another star, its apparent brightness will be 1/4 of the other star's apparent brightness. In this case, the star located at 2000 light years away is four times further away from Earth than Betelgeuse, which is located 500 light years away. Therefore, according to the inverse square law, the relative brightness of the star located at 2000 light years away compared to Betelgeuse would be 1/4 x 1/4 = 1/16. In other words, the star located at 2000 light years away would appear to be 16 times dimmer than Betelgeuse.

So, the correct answer is "1/16".

To know more about light years please refer: https://brainly.com/question/13218254

#SPJ4

Question - Betelgeuse is a very large/bright star located about 500 light years away. if a similar star is located at 2000 light years away, its relative brightness, compared to Betelgeuse, would be which of the following?

(a) 1/16, (b) 1/2, (c) 1/35, (d) 1/15

The rank of particles on the basis of energy is  2 > 3 = 4 > 1 > 5 = 6

The Rank of particles on the basis of speed is 1=2=3=4=5=6

All speed that is faster than light is the same. When a charged particle and an antiparticle annihilate one another, energy can create both positive and negative charges, +q and q. If both +q and q are 0, it follows that m must also be 0.

When, in order to conserve energy, an electron and positron annihilate to produce two genuine photons with mass zero that depart with the same energy as the electron-positron pair.

Additionally, contrary charges and timings must cancel. As opposed to the positron, which travels time backward, the electron pushes time forward. Time cancels out, as a result, creating two photons that travel at the speed of light while maintaining the illusion of time standing still.

Nuclear weapons have been theorized to be triggered by antimatter, and thermonuclear energy may be produced with it.

Learn more about Quantum Physics here

https://brainly.com/question/26095165

#SPJ4

The electron transport chain uses electrons between protein complexes to set up a proton gradient.

As the name suggests, the electron transport chain involves a series of proteins that pass electrons from one to the next. These electrons are removed from glucose, releasing energy as they pass through the electron transport chain. This energy is used to pump protons across the semipermeable membrane, creating a proton gradient that can drive ATP synthesis.

The electron transport chain is a series of four protein complexes that combine redox reactions to generate an electrochemical gradient that leads to the formation of ATP in a complete system called oxidative phosphorylation.

When an electron moves from a low redox potential to a high redox potential, the free energy released when high-energy electron donors and acceptors are converted to low-energy products is used by complex electron transport chains to create an electrochemical ion gradient. It is this electrochemical gradient that drives ATP synthesis by coupling to oxidative phosphorylation by use of ATP synthase.

Read more about cell physiology at:

brainly.com/question/14228763

#SPJ4

When the overcurrent protection for a conductor is located on the load end rather than the supply side of a conductor it is considered to be a tap conductor.

The National Electrical Code (NEC), the benchmark for safe electrical design, installation, and inspection to protect people and property from electrical hazards, defines a tap conductor as a conductor, other than a service conductor, that has overcurrent protection rated more than the ampacity of a conductor. A tap conductor has overcurrent protection ahead of its point of supply that exceeds the value permitted for similar conductors that are protected as described in NEC 240.4. Hence, when the overcurrent protection for a conductor is located on the load end rather than the supply side of a conductor it is considered to be a tap conductor.

Learn more about Tap conductor:

https://brainly.com/question/14744748

#SPJ4

When two identically sized balls are thrown against a wall at a speed of 5 m/s, they clash. Ball A strikes the wall and bounces back with a 4 m/s speed. The ball B stops after striking the wall. Assume that each ball's collision times are the same.

Compared to ball B, ball A has a greater velocity change, a greater momentum change, and a greater impact force.

Learn more about Collision here

https://brainly.com/question/24915434

#SPJ4

A 0.53kg mass is hung on a vertical spring which has spring constant k=70N/m, balanced then the spring stretch relative to its original length as a result of the mass hanging on it is 0.742m

Given that the mass of block (m) = 0.53kg

spring constant of the spring (k) = 70N/m

The force exerted by the spring balances the weight of the hanging mass is (F) = kl where l is length of the spring

We know that F = mg

mg = kl

then 0.53 x 9.8 = 70 x l

l = 0.0742m

Hence the length of the spring is 0.742m

To learn more about force click here https://brainly.com/question/13191643

#SPJ4

a) The amplitude of oscillation is 0.780 m.

b) The force constant of the spring can be determined by using the equation F=kx, where F is the force applied to the mass, k is the force constant, and x is the displacement of the mass. Since the displacement of the mass is 0.780 m, we can solve for k to get k = F/x = 0.780 N/m.

c) The position of the mass after one half a period is given by x(t) = (0.780 m)cos[(18.0 rad/s)t] = (0.780 m)cos[(9.0 rad/s)t] = 0.780 m.

d) The position of the mass one-third of a period after it has been released is given by x(t) = (0.780 m)cos[(18.0 rad/s)t] = (0.780 m)cos[(6.0 rad/s)t] = -0.500 m.

e) To determine the time it takes the mass to get to the position x=-0.500 m after it has been released, we can use the equation x(t) = (0.780 m)cos[(18.0 rad/s)t]. Since we know that x=-0.500 m when t=t0, we can solve for t0 to get t0=6.00 s. Therefore, it takes the mass 6.00 s to get to the position x=-0.500 m after it has been released.

For more questions like Oscillation click the link below:

https://brainly.com/question/13981801

#SPJ4

The ratio of F₂ : F₁ is 1 : 2

Newton's gravitation law states that the force of attraction between two objects can be formulated as follows:

F= Gm₁m₂/r²

F = Gravitational Force ( Newton )

G = Gravitation Constant ( 6.67 × 10⁻¹¹ Nm² / kg² )

m = Object's Mass ( kg )

R = Distance Between Objects ( m )

Gravitational force on planet 1 = F₁

Gravitation force on planet 2 = F₂

mass of planet 1 = m₁

mass of planet 2 = m₂ = 2m₁

distance between planet 1 and star = R₁

distance between planet 2 and star = R₂ = 2R₁

ratio of force = F₂ : F₁ = ?

F₂ : F₁ = GMm₁/r₁² : GMm₂/r₂²

F₂ : F₁ = m₁/r₁² : m₂/r₂²

F₂ : F₁ = 2m₁/(2r₁)² : m₁/r₁²

F₂ : F₁ = (2/4) : 1

F₂ : F₁ = (1/2) : 1

F₂ : F₁ = 1 : 2

Therefore, the ratio of gravitation forces F₂ : F₁  is 1 : 2.

To learn more about gravitation, refer: brainly.com/question/4189441

#SPJ4

Because each 12 AWG conductor requires 2.25 cubic inches of space, the volume required for four 12 AWG conductors is 9 cubic inches.

A 4 AWG copper wire is the minimum size equipment grounding conductor for this 200-ampere feeder. This number comes after gauge. For example, 14/2 shows that the cable contains two 14-gauge wires (a ground wire, if present, is not included in this number). Grounding: The letter "G" or the word "GROUND" indicate the presence of a ground wire. Throughout your basement project, this is the wire that connects all of your light fixtures and switches to your panel box.

Learn more about conductor here-

https://brainly.com/question/8426444

#SPJ4

Answer:

A mix of objects that interact with any other object is not a description of a closed system. A closed system is an isolated system that does not exchange matter or energy with its surroundings. In other words, a closed system is an object or a collection of objects that is not influenced by external effects and does not interact with any other objects.

pls mark as brainliest!

Explanation:

1/3 the loss and irreversible damage of coral reefs, wetlands, and coastal estuaries.

Estuaries are often categorized according to their underlying geology or their geologic origin. According to their geology, estuaries can be divided into four main categories: tectonic, bar-built, drowned river valleys, and fjords.

Because so many species of animals rely on ports for breeding and nesting, they are frequently referred to as the "nurseries of the sea." Chinook, herring, and oysters all spend at least a portion of their lives in estuaries, as do the majority of fish and shellfish consumed in the US.

to know more about coastal estuaries visit:

https://brainly.com/question/10073648

#SPJ4

The current flowing through the circuit A is IA = 2ε/(R1 + R2)

b) IB = 2ε/(2R2 + R1) c) P = 0.064

The equivalent resistance of the circuit A in series is calculated as follows;

Re = r1 + r2

The emf of the battery connected to circuit A

emf = e

The current flowing through the circuit A is calculated as follows;

I = V / R

I = e / r1 +  r2

Total resitance in circuit A = Req = R1+R1+R2 =2R1 + R2

total emf in circuit A = 2E

I = 2E/Req

I = 2E/(2R1+R2)

given : E = 10 V

R1 = 300 ohm

R2 = 5000 ohm

since connection is in series so current remain same across resistors

I = 2*10/(2*300 + 500)

I = 3.57 x 10^-3 A

power dissipated by R2

P = I^2*R2

P = (3.57 x 10^-3)^2 * 5000

P = 0.064

Learn more about circuit here:

https://brainly.com/question/12608516

#SPJ4

The tension of the left rope is 98N and tension of the right rope is 29.4N if two boxes are connected by a rope passing over a pulley .

We know very well when two masses are attached by a pulley,the only force acting on the blocks is the force due to gravity. Tension is measured in newtons. Also, since different masses are attached on both ends of pulley due to that tension generated in the rope are different.

We know force due to gravity is equal to =mg where m is defined as the mass and g is defined as the acceleration due to gravity.

Now, mass of left block is =10kg.Therefore,tension in left rope=mg

=>Tension in left rope=10×9.8

=>Tension in left rope=98N

Similarly, mass of right block is =3kg.Therefore,tension in right rope=mg

=>Tension in right rope=3×9.8

=>Tension in right rope=·29.4N

Hence, required tensions are 98N and 29.4N

To know more about tensions, visit here:

https://brainly.com/question/15880959

#SPJ4

When the current in the circuit is double of its initial value and separation is half then the original capacitive reactance in terms of r is 3r.

Capacitive Reactance is the relationship between reactance, frequency and capacitance. Resistance is unaffected by the rate of change of voltage or current and remains the same whether DC, or AC of any frequency is applied.

In a purely resistive circuit Ohms law applies and V= IR. Calculations of resistance in AC circuits are the same as for DC. The only extra thing to remember when calculating AC values, is that the same type of value, e.g. the RMS, Average value, or the peak-to-peak value must be used for all AC voltages or currents throughout the equation.

Inductance and capacitance however, have an effect on current that depends on frequency, and when either component is used with AC voltages and currents, then the frequency of the waveform must be taken into account.

To know more about capacitive reactance here

https://brainly.com/question/27853857

#SPJ4

Answer:

Ellipses are required in engineering, architectural, and machine drawings for two main reasons. First, any circle viewed at an angle will appear to be an ellipse. Second, ellipses were common architectural elements, often used in ceilings, staircases, and windows.

The ellipse is one of the four classic conic sections created by slicing a cone with a plane. The others are the parabola, the circle, and the hyperbola. The ellipse is vitally important in astronomy as celestial objects in periodic orbits around other celestial objects all trace out ellipses.

We may calculate the proportion of data values that are 1.5 standard deviations or more from the mean using Chebyshev's rule in statistics. Alternately, we can calculate the proportion of data values that deviate by 2.5 standard deviations from the mean.

What does a 75% Chebyshev interval mean?

Therefore, Chebyshev's Theorem informs you that at least 75% of the values lie within the range of 100 20, or 80 to 120. In contrast, no more than 25% of cases fall outside of that range. 1.41 standard deviations is an intriguing range.

What does the Chebyshev inequality tell us?

According to Chebyshev's inequality, 75% of values are found within two standard deviations of the mean, and 88.9% are found within three standard deviations of the mean. It is true for.

To know more about chebyshev to estimate visit;

https://brainly.com/question/14019579

#SPJ4

Brutus grabs Fred in a tight grip, and they fall to the ground.

The distance they slide is 0.0915m.

As given in the question

The mass of Fred ([tex]M_1[/tex]) is 65 kg

The mass of Brutus ([tex]M_2[/tex]) is 130kg

Speed of Fred running with foot ball ([tex]V_1[/tex]) is  -5.8m/s ( negative direction)

Speed of Brutus ([tex]V_2[/tex]) is 4m/s

The coefficient of friction is given as 0.30

By applying the law of conservation of momentum is

[tex]M_2V_2 - M_1V_1=(M_1+M_2)V[/tex]

[tex]M_1[/tex] is the mass of first object

[tex]M_2[/tex] is the mass of second object

[tex]V_1[/tex] is the velocity of first object

[tex]V_2[/tex] is the velocity of the second object

V is the velocity after colliding

Now

130 x 4 - 65 x 5.8= ( 65 + 130) V

520 - 377 = 195V

195V =143

V = 0.733m/s

Now acceleration due to friction is

=> [tex]\mu_k\ g[/tex]

=> 0.3 x 9.8

=.>2.94m/[tex]s^2[/tex]

To find the distance

[tex]v^2-u^2=2as[/tex]                             ( where u = 0)

=> [tex](0.733)^2=2 \times 2.94 \ s[/tex]

=>  s = 0.0915m

To know more about law of conservation of momentum:

https://brainly.com/question/29244885

#SPJ4

V(x, Y, Z) = 16Vo/pi2 is the potential inside the pipe. (-pi(m/a)2 + (n/b)2)1/2) sin (m*piy/a)sin (n*pi*Z/b). Because only one end of a rectangular metal pipe with sides a and b is grounded at x = 0.

Simply said, potential difference is the difference in electrical potential between two places. Two positive charges will repel one another when presented close to one another. The standard addresses the sizing and dimensioning of steel pipes. These pipes come in seamless and welded varieties, and they can withstand high or low temperatures and pressures. The pipe is distinct from the tube (Pipe versus Tube) in this context because it is specifically used for pipeline systems and the transmission of fluids (oil and gas, water, slurry).

In the event that Vo(y, z) = Vo Vo(a)(1-(-1)m-1 * b/n*pi(1-(-1)n) = Cn,m(a/2, b/2) V(x, y, z) = 16Vo/pi2(-pi(m/a)2+(n/b)2)1/2) sin (m*piy/a)sin(n*p)

Learn more about potential here

https://brainly.com/question/12198573

#SPJ4

The complete question  is -

An infinitely long rectangular metal pipe (sides a and b) is grounded, but one end, at x = 0, is maintained at a specified potential Vo(y, z), Find the potential inside the pipe. as indicated in Fig. y V=0 Vo(y, 2) b

The tension in the cable is F = πEaV²r³/2d²

The work. done. by the cable. is W = πEaV²r²/4d

[tex]\mathbf{U_i-U_f=\frac{\varepsilon_0\pi r^2 V^2}{2d}-\frac{\varepsilon_0\pi r^2 V^2}{4d}}\mathbf{\Rightarrow U_i-U_f=\frac{\varepsilon_0\pi r^2 V^2}{4d}}[/tex]

The equation can be used to depict the electric field created between two circular plates of a capacitor if they are separated by a constant distance and supported by a cable.

E = V/d

E' = E/2

F = qv/2d

F = Eav2r2/2d2.

Assuming that dz has shifted the upper plate higher, we can express the tension's work as follows:

dw = T*dz

dz = F * dw

The cable's work is W = Eav2r2/4d, or W = Eav2r2/2z2*dz.

Before the top plate is raised, the electrical energy capacitor has the following amount of energy stored in it:

Ui = 1/2 Cv²

Ui = EaR2V2D

Yes, the work carried out by the cable is equivalent to the change in electrical energy that has been stored. The variation in energy previously stored

Ui = Eaπr²v²/4d

[tex]\mathbf{U_i-U_f=\frac{\varepsilon_0\pi r^2 V^2}{2d}-\frac{\varepsilon_0\pi r^2 V^2}{4d}}\mathbf{\Rightarrow U_i-U_f=\frac{\varepsilon_0\pi r^2 V^2}{4d}}[/tex]

Learn more about tension here:

https://brainly.com/question/15211735

#SPJ4

Luke is part of a team test with changing the wires and electrical fitness in a basement. The earlier team has been working in a confined space for eight hours. To ensure safety, they should D. use safety helmets

Safety helmets, also known as hard hats, are intended to shield the head from flying and falling objects as well as from impacts such as bumps, scratches, and electrical arcs. They also serve to protect the side of the head, the eyes, and the neck from harm.

A safety helmet must be worn at all times while working. Your head is better shielded from shock, impact, and severe injury. Simply put, wearing a helmet lowers your risk of death and serious brain injuries because the helmet absorbs the majority of the impact energy during a fall or collision rather than your head and brain.

Therefore, based on the information given, the correct option is D.

Learn more about safety elements on:

https://brainly.com/question/1235633

#SPJ1

When  two lamps with one thick filament and one with a thin filament of the same material, are connected in parallel to a power supply. Then the  current is greater in the lamp with a thick filament.

Ohm's Law can be used to calculate the relationship between voltage, current, and resistance in an electrical circuit.

Ohm's law can be written as follows:,

V = I x R

When written out, the formula is as follows: voltage = current x resistance, or

Volt = Amp x Ω.

Because theory is connected in parallel and the potential difference across each filament is the same, we can conclude that a material's resistance is [tex]R = \rho*lA[/tex]

[tex]\rho[/tex] is the resistivity if the material for the two filaments is the same and the length 'l' is also the same

The area of cross section of a thick filament is greater than that of a thin filament. The resistance is less than the thin filament current. [tex]I = \frac{V}{R}[/tex]

since V is same

If R is smaller, current is greater, and thus current is greater in thick filament.

To learn more about ohm's law refer here

https://brainly.com/question/14796314

#SPJ4

The rms emf of the AC generator  is 297 Volt. Hence, option (C) is correct.

Energy is transformed from one form to another using a generator or a battery. One terminal in these gadgets charges up positively, whereas the other charges up negatively. Therefore, work performed on a unit of electric charge constitutes an electromotive force.

Given that: the  maximum output emf of  the AC generator:

V₀ =4.20 x 10^2 V.

Hence, r.m.s  output emf of  the AC generator:

[tex]V_{rms[/tex] = V₀/√2

= 4.20 x 10^2/√2 Volt

=297 Volt.

Learn more about rms emf here:

https://brainly.com/question/10093221

#SPJ1

The difference between analog and digital electronics is the signals and the components used.

The electronics can be classified into categories: analog and digital electronics. Some differences between both of them are as follows :

Thus, two differences between analog and digital electronics are analog uses continuous signals while digital uses discrete signals. Then, the analog uses passive components whereas digital uses active components.

Learn more about analog and digital by clicking this link :

https://brainly.com/question/23777902

#SPJ4

Difference between analog and digital electronics:

Analog electronics are electronics that deal with continuous signals. They generally provide a better and more accurate representation of changes in physical phenomena, such as position, pressure, and light.

Digital electronics are electronics that deal with binary signals. The digital signals for this type of electronics are represented using binary language (0's and 1's). Their circuits are usually composed of large assemblies of logic gates.

The difference between the two are the components used and the type of signal they deal with.

Learn more about digital technology at https://brainly.com/question/4371054

#SPJ4

The work done by the steam when the piston moves 0.800 m is 1.75×10⁵ J and the amount of work by calculating the force exerted times the distance traveled is 1.85×10⁵ J. From this, the work done by the second part is more than the initial one. So they are not the same.

The work produced by the compression or expansion of fluid is known as pressure-volume work. Gas molecules gain kinetic energy when energy is added, which causes the gas to expand and affect its surroundings. The work is calculated using the formula W=pΔV where p is pressure, W is work done and ΔV is the change in the volume.

Given the gauge pressure (Pg) of the steam locomotive is  1.75×10⁶ N/m², the radium of piston r is 0.200 m, and the distance moved by the piston l is 0.800 m.

a) First, calculate the ΔV.

ΔV = area×distance

ΔV = πr²×l

ΔV = π×(0.20)²×0.80

ΔV = 0.1 m³

Then, the work done will be,

W = 1.75×10⁶× 0.1

W = 1.75×10⁵ J

The required answer is 1.75×10⁵ J.

b) The absolute pressure is given by the sum of gauge pressure and the atmospheric pressure, i.e., P=P₀+Pg. Then,

P = 1.01×10⁵ +  1.75×10⁶

P = 18.5×10⁵ Pa.

The force is calculated as,

F = P×A

F = 18.5×10⁵×π×(0.20)²

F = 232477 N

The work done by the piston is calculated as,

W = Force×distance

W = 232477×0.80

W = 1.85×10⁵ J

The required answer is 1.85×10⁵ J.

The answer for the first and second parts are not the same.

To know more about pressure-volume work:

https://brainly.com/question/13130776

#SPJ4

For coexisting states of matter, this measurement is utilized in its orthobaric form. Comparing these ratios is specific gravity. This idea is used by buoyancy to determine whether an object will float or sink.

1 gram per cubic centimeter is the unit of measurement for water. This number, which is equal to mass over volume, is known as density, and it is represented by the Greek letter rho. A hydrometer or aerometer measures a fluid's specific gravity, or relative density, which is the difference between the density of the fluid and the density of water. The typical components of a hydrometer are a cylindrical stem made of glass, a bulb weighed down with lead or mercury so that it can float, and a water-filled container.

To learn more about buoyancy click here https://brainly.com/question/19168433

#SPJ4

The correct answer is "c. horizontal component of the normal force." When a railroad train rounds a banked track, the centripetal force needed comes from friction, but from the horizontal component of the normal force.

It is the component of the normal force that acts perpendicular to the direction of motion. The normal force is the force exerted by a surface on an object that is in contact with it. It acts perpendicular to the surface and helps to support the weight of the object. In the case of a train rounding a banked track, the normal force acts perpendicular to the surface of the track and helps to keep the train from sliding off the track.

The horizontal component of the normal force is the component of the normal force that acts in the direction of motion. It acts parallel to the surface of the track and helps to provide the centripetal force needed to keep the train moving in a circular path.

Learn more about Centripetal Force here:

https://brainly.com/question/898360

#SPJ4

Answer:

A: It becomes bigger.

Explanation:

When the ball is moved closer to the light source, the size of its shadow on the wall will increase. This is because the light from the bulb will be more concentrated on the ball, resulting in a larger area of the wall being blocked from the light and therefore appearing as part of the shadow. The darkness of the shadow will not change, as the amount of light being blocked by the ball remains the same. The sharpness of the shadow may also not change, as the distance between the ball and the wall will not affect the clarity of the shadow's edges. However, the length of the shadow may appear shorter, as the ball will be closer to the wall and therefore the shadow will appear to be cast over a shorter distance.

(please mark as brainliest!)

The measurement is 15.21 meters. When the jumper is at its maximum elongation, the cord will be extended by 85.21 m.

In light of this,

h=100 m bridge height

30 meters in length

40 N/m spring constant

Weight = 80 kg Assume we need to determine the distance at which the cord reaches its maximum elongation.

We must compute the distance.

We must compute the gravitational potential energy.

Using the gravitational potential energy formula

We must compute the value of x.

When the jumper is at its maximum elongation, the cord will be extended by 85.21 m. We must compute the distance. The negative symbol indicates the depth of the water.

As a result, the distance is 15.21 m.

Learn more about gravitational here-

https://brainly.com/question/3009841

#SPJ4