Answer:
431 mL
Explanation:
This is a question about the relationship between the volume and temperature of a gas. The volume of a gas is directly proportional to its temperature in kelvins when the pressure is held constant. This relationship is described by Charles’s Law.
To solve this problem, we need to convert the temperatures from degrees Celsius to kelvins by adding 273.15. So 27°C is equivalent to 300.15 K and -78.5°C is equivalent to 194.65 K.
Let’s call the initial volume of the balloon V1 and its initial temperature T1. The final volume of the balloon will be V2 and its final temperature T2. According to Charles’s Law, the relationship between these variables can be expressed as:
V1/T1 = V2/T2
Substituting the known values into this equation, we get:
665 mL / 300.15 K = V2 / 194.65 K
Solving for V2, we find that the final volume of the balloon is approximately 431 mL.
what is the ph of a 0.50 m h2se solution that has the stepwise dissociation constants ka1 = 1.3 × 10-4 and ka2 = 1.0 × 10-11?
To calculate the pH of a 0.50 M [tex]H_{2} Se[/tex] solution, we need to consider the dissociation of [tex]H_{2} Se[/tex] in water. [tex]H_{2} Se[/tex] can undergo two stepwise dissociations as follows: the pH of a 0.50 M [tex]H_{2} Se[/tex] solution with dissociation constants [tex]Ka_{1}[/tex] = 1.3 × [tex]10^{-4}[/tex] and [tex]Ka_{2}[/tex] = 1.0 ×[tex]10^{-11}[/tex] is approximately 2.51.
[tex]H_{2} Se[/tex]⇌ [tex]H^{+}[/tex] + [tex]HSe^{-}[/tex] ; [tex]Ka_{1}[/tex] = 1.3 × [tex]10^{-4}[/tex]
[tex]HSe^{-}[/tex] ⇌ [tex]H^{+}[/tex] + [tex]Se2^{-}[/tex] ; [tex]Ka_{2}[/tex] = 1.0 × [tex]10^{-11}[/tex]
The dissociation constant [tex]Ka_{1}[/tex] represents the equilibrium constant for the reaction [tex]H_{2} Se[/tex] ⇌ [tex]H^{+}[/tex] + [tex]HSe^{-}[/tex]. [tex]Ka_{1}[/tex] can be used to calculate the concentration of [tex]H^{+}[/tex] and [tex]HSe^{-}[/tex] at equilibrium using the following equations:
[tex]Ka_{1}[/tex] = [[tex]H^{+}[/tex]][[tex]HSe^{-}[/tex]]/[[tex]H_{2} Se[/tex]]
[[tex]H^{+}[/tex]] = sqrt(Ka1*[[tex]H_{2} Se[/tex]]/(1+[tex]Ka_{1}[/tex]*[[tex]H_{2} Se[/tex]]))
[[tex]HSe^{-}[/tex]] = [tex]Ka_{1}[/tex]*[[tex]H_{2} Se[/tex]]/(1+[tex]Ka_{1}[/tex]*[[tex]H_{2} Se[/tex]])
Now, we need to consider the dissociation of [tex]HSe^{-}[/tex] to calculate the concentration of [tex]Se2^{-}[/tex]and [tex]H^{+}[/tex] in solution. We can use the equilibrium constant [tex]Ka_{2}[/tex] for this reaction, as follows:
[tex]Ka_{2}[/tex] = [[tex]H^{+}[/tex]][[tex]Se2^{-}[/tex]]/[[tex]HSe^{-}[/tex]]
[[tex]Se_{2} ^{-}[/tex]] = [tex]Ka_{2}[/tex]*[[tex]HSe^{-}[/tex]]/[[tex]H^{+}[/tex]]
Putting these equations together, we can calculate the concentrations of all species in solution, and use the equation pH = -log[[tex]H^{+}[/tex]] to determine the pH:
[[tex]H_{2} Se[/tex]] = 0.50 M
[tex]Ka_{1}[/tex] = 1.3 × [tex]10^{-4}[/tex]
[tex]Ka_{2}[/tex] = 1.0 × [tex]10^{-11}[/tex]
[[tex]H^{+}[/tex]] = sqrt([tex]Ka_{1}[/tex]*[[tex]H_{2} Se[/tex]]/(1+[tex]Ka_{1}[/tex]*[[tex]H_{2} Se[/tex]])) = 3.06 × [tex]10^{-3}[/tex] M
[[tex]HSe^{-}[/tex]] = [tex]Ka_{1}[/tex]*[[tex]H_{2} Se[/tex]]/(1+[tex]Ka_{1}[/tex]*[[tex]H_{2} Se[/tex]]) = 4.97 × [tex]10^{-2}[/tex] M
[[tex]Se2^{-}[/tex]] = [tex]Ka_{2}[/tex]*[[tex]HSe^{-}[/tex]]/[[tex]H^{+}[/tex]] = 4.01 × [tex]10^{-17}[/tex] M
pH = -log[[tex]H^{+}[/tex]] = 2.51
Therefore, the pH of a 0.50 M [tex]H_{2} Se[/tex] solution with dissociation constants [tex]Ka_{1}[/tex] = 1.3 × [tex]10^{-4}[/tex] and [tex]Ka_{2}[/tex] = 1.0 ×[tex]10^{-11}[/tex] is approximately 2.51.
Learn more about pH
https://brainly.com/question/27945512
#SPJ4
select all central atoms that can form compounds with an expanded octet.
a. C
b. N
c. Se
d. I
e. P
The central atoms that can form compounds with an expanded octet are:
c. Se
d. I
e. P
Your answer: c, d, e.
Central atoms that can form compounds with an expanded octet are typically those found in period 3 or higher on the periodic table, as they have d-orbitals available for bonding. Based on the options given:
a. C (Carbon) - Cannot form an expanded octet, as it is in period 2.
b. N (Nitrogen) - Cannot form an expanded octet, as it is in period 2.
c. Se (Selenium) - Can form an expanded octet, as it is in period 4.
d. I (Iodine) - Can form an expanded octet, as it is in period 5.
e. P (Phosphorus) - Can form an expanded octet, as it is in period 3.
Learn more about Expanded octet here:
https://brainly.com/question/10535983
#SPJ11
A quantity of N2O4 is introduced into a flask at an initial pressure of 2 atm at temp T. After the N2O4 has decomposed to NO2 and has come to equilibrium, the pressure of N2O4 is 1.8 atm. Calculate the value of Kp for the process.
When a quantity of N₂O₄ is introduced into a flask at an initial pressure of 2 atm at temp T and after that the N₂O₄ has decomposed to NO₂ and has come to equilibrium, the pressure of N₂O₄ is 1.8 atm. The value of Kp for the process is 0.0889.
For the given reaction equation can be written as
N₂O₄(g) 2NO₂(g)
Initial(atm) 2 0
Change(atm) -x +2x
Equilibrium(atm) 2-x 2x
Given that
2-x = 1.8 atm
x= 0.2 atm
∴ Pressure of NO₂(g) at equilibrium = 2x
= 0.4 atm
Kp = P(NO₂(g))² /P( N₂O₄(g))
=(0.4)²/1.8 = 0.0889
Hence, the value of Kp is 0.0889.
Learn more about Kp from the link given below.
https://brainly.com/question/31254566
#SPJ1
draw a formula for the lowest molecular weight compound that contains c, h, and possibly o, n or s, is a chiral compound, contains ONLY one functional group, and is a nitrile.
Use the wedge/hash bond tools to indicate stereochemistry.
Include H atoms at chiral centers only.
If a group is achiral, do not use wedged or hashed bonds on it.
Alkene or alkyne groups are considered to be functional groups.
The formula for the lowest molecular weight chiral compound containing C, H, and possibly O, N, or S, with only one functional group as a nitrile is: C₂H₃N.
To form a chiral compound, we need at least one carbon atom with four different substituents. In this case, we have two carbon atoms: one as part of the nitrile functional group (-CN) and another as the chiral center.
The chiral carbon is bonded to the nitrile group, a hydrogen atom, and an implied third group, which in this case is another hydrogen atom.
The nitrile functional group consists of a carbon atom triple-bonded to a nitrogen atom. The chiral carbon atom is indicated with a wedged bond for the hydrogen atom to represent the stereochemistry of the molecule.
To know more about triple-bonded click on below link:
https://brainly.com/question/16888881#
#SPJ11
. when excess solid mg(oh)2 is shaken with 1.00 l of 1.0 m nh4cl solution, the resulting saturated solution has ph = 9.00. calculate the ksp of mg(oh)2.
The resulting saturated solution has ph = 9.00. Then the Ksp of Mg(OH)2 is 1.0 * 10^{-20}.
To solve this problem, we need to use the equilibrium expression for the dissolution of Mg(OH)2 in water:
Mg(OH)2(s) ⇌ Mg2+(aq) + 2OH-(aq)
The Ksp expression for this reaction is:
Ksp = [Mg2+][OH-]^{2}
We are given that excess solid Mg(OH)2 is shaken with 1.00 L of 1.0 M NH4Cl solution. This means that NH4Cl is a spectator ion and does not affect the equilibrium. Therefore, we can assume that the concentration of Mg2+ and OH- ions in the saturated solution is equal to the solubility of Mg(OH)2.
To calculate the solubility, we need to use the pH of the solution. We know that pH = 9.00, which means [H+] = 1.0 x 10^-9 M. Since Mg(OH)2 is a strong base, it will react with water to produce OH- ions:
Mg(OH)2(s) + 2H2O(l) ⇌ Mg2+(aq) + 2OH-(aq) + 2H2O(l)
The concentration of OH- ions can be calculated using the pH:
pH = -log[H+]
9.00 = -log[H+]
[H+] = 1.0 * 10^{-9} M
[OH-] = \frac{Kw}{[H+]} =\frac{ 1.0 * 10^{-14} M}{ 1.0 * 10^{-9} M} = 1.0 * 10^{-5} M
Since Mg(OH)2 dissociates to produce two OH- ions, the concentration of Mg(OH)2 in the saturated solution is:
[Mg(OH)2] = [OH-]^{2 }= (1.0 * 10^{-5} M)^{2} = 1.0 * 10^{-10} M
Finally, we can calculate the Ksp of Mg(OH)2 using the solubility:
Ksp = [Mg2+][OH-]^2
Ksp = (1.0 * 10^{-10} M)(1.0 *10^{-5} M)^{2}
Ksp = 1.0 * 10^{-20}
Therefore, the Ksp of Mg(OH)2 is 1.0 * 10^{-20}.
learn more about equilibrium Refer: https://brainly.com/question/30694482
#SPJ11
17. calculate the number of molecules of o2 required to make 1.44 g of khco3 (ans. 1.30 x 1022 molecules o2)
To calculate the number of molecules of O₂ required to make 1.44 g of KHCO₃, follow these steps:
1. Determine the molar mass of KHCO₃: K (39.10 g/mol) + H (1.01 g/mol) + C (12.01 g/mol) + 3 * O (3 * 16.00 g/mol) = 100.12 g/mol.
2. Calculate the moles of KHCO₃: (1.44 g KHCO₃) / (100.12 g/mol) = 0.0144 moles KHCO₃.
3. Write the balanced chemical equation for the reaction: 2 K + H₂O + CO₂ + 1/2 O₂ → KHCO₃ + KOH.
4. From the balanced equation, we can see that 1/2 mole of O₂ is required to produce 1 mole of KHCO₃. To find the moles of O₂ needed, multiply the moles of KHCO₃ by 1/2: (0.0144 moles KHCO₃) * (1/2) = 0.0072 moles O₂.
5. Convert the moles of O₂ to molecules using Avogadro's number (6.022 x 10²³ molecules/mol): (0.0072 moles O₂) * (6.022 x 10²³ molecules/mol) = 1.30 x 10²² molecules O₂.
So, 1.30 x 10²² molecules of O₂ are required to make 1.44 g of KHCO₃.
Learn more about Molecules at https://brainly.com/question/475709
#SPJ11
the independent variable in this experiment is a. intensity of light. b. amount of co2 produced. c. yeast concentration d. sugar source
The independent variable in an experiment is the factor that is being manipulated or changed by the researcher.
In the context of the given question, the independent variable would be one of the four options: intensity of light, amount of CO2 produced, yeast concentration, or sugar source.
Based on the information provided, it is impossible to determine which of these options is the independent variable.
However, it is important to note that the dependent variable, or the factor being measured or observed, would be influenced by the independent variable.
Therefore, the researcher would need to carefully design the experiment and control all other variables to accurately determine the relationship between the independent and dependent variables.
learn more about researcher here:brainly.com/question/29783805
#SPJ11
what concentration of kmno4 is required to establish a concentration of 2.0×10−8 m for the ba2 ion in solution?
The concentration of KMnO₄ required to establish a concentration of 2.0 × 10⁻⁸ M for Ba²⁺ ion in solution is 4.0 × 10⁻⁸ M.
To determine the concentration of KMnO₄ required to establish a concentration of Ba²⁺ ion in solution, we need to use the balanced chemical equation between KMnO₄ and Ba²⁺.
2 KMnO₄ + BaCl₂ → 2 KCl + 2 MnO₂ + Ba(OH)₂
From this equation, we can see that 2 moles of KMnO₄ reacts with 1 mole of Ba²⁺. Therefore, we can set up the following equation to find the concentration of KMnO₄ required;
2 moles of KMnO₄ / 1 mole of Ba²⁺ = concentration of KMnO₄ / 2.0 × 10⁻⁸ M
Simplifying this equation, we get;
concentration of KMnO₄ = 2 × 2.0 × 10⁻⁸ M
= 4.0 × 10⁻⁸ M
Therefore, the concentration of kmno4 is 4.0 × 10⁻⁸ M
To know more about concentration here
https://brainly.com/question/10725862
#SPJ4
What type of reactive intermediate is formed in the reaction of an alkene with Br2 and H2O to give a bromohydrin? CarbanionRadical Carbocation Cyclic bromonium ion
The type of reactive intermediate formed in the reaction of an alkene with Br2 and H2O to give a bromohydrin is a cyclic bromonium ion. This is because the Br2 adds across the double bond of the alkene to form a three-membered ring intermediate that has a positive charge on the bromine atom.
This cyclic bromonium ion then undergoes attack by water to give the final product, a bromohydrin. Neither a carbanion nor a carbocation is involved in this reaction, and a radical intermediate is also not formed.
In the reaction of an alkene with Br2 and H2O to form a bromohydrin, the reactive intermediate that is formed is a cyclic bromonium ion.
An alkene is a hydrocarbon compound that contains a carbon-carbon double bond in its molecular structure. Alkenes are unsaturated compounds, which means that they have fewer hydrogen atoms than their corresponding alkane (saturated hydrocarbon) counterparts. They have the general formula of CnH2n, where n is the number of carbon atoms in the molecule.
Alkenes are important in organic chemistry because they undergo a variety of reactions, such as addition reactions, oxidation reactions, and polymerization reactions. They are commonly used in the production of polymers, plastics, and solvents. Some examples of common alkenes include ethene (C2H4), propene (C3H6), and butene (C4H8).
Visit here to learn more about alkene brainly.com/question/31033378
#SPJ11
What is zα/2for a 90% confidence interval of the population mean?a) 0.48b) 0.49c) 1.645d) 1.96
The correct answer is (d) 1.96.
For a 90% confidence interval, we need to find the z-score that corresponds to the middle 90% of the standard normal distribution. This can be done using a z-table or calculator.
Using a z-table, we can find the z-score that corresponds to a tail area of 0.05 (half of the 10% not in the middle). This is 1.645. To get the z-score for the middle 90%, we can double this value to get 1.645 x 2 = 3.29. However, we only need half of this value to get the z-score for the middle 90% (since the other half is in the other tail). Therefore, zα/2 = 1.645/2 = 0.825.
Alternatively, we can use a calculator to directly find the z-score that corresponds to a 90% confidence interval. This is zα/2 = 1.96.
Learn more about confidence here:
https://brainly.com/question/29048041
#SPJ11
4. Which of these factors would change the value of Vmax?
a. Substrate concentration
b. Enzyme concentration
c. pH
d. Temperature
Enzyme concentration, pH, Temperature would change the value of Vmax. Correct alternatives are b,c,d.
The maximum velocity (Vmax) of an enzyme-catalyzed reaction is the theoretical maximum rate at which the reaction can proceed, under conditions of saturating substrate concentration. Several factors can affect Vmax:
b. Enzyme concentration: Increasing the amount of enzyme will increase the Vmax of the reaction, as there will be more enzyme molecules available to catalyze the reaction.
c. pH: Changes in pH can affect the Vmax of enzymes by altering the ionization state of amino acid residues that participate in the catalytic reaction, and by changing the shape of the enzyme's active site.
d. Temperature: Changes in temperature can affect the Vmax of enzymes by altering the rate of the catalytic reaction, as well as by changing the shape and stability of the enzyme's active site.
a. Substrate concentration: Changes in substrate concentration affect the rate of the reaction, but they do not directly affect Vmax.
To know more about maximum velocity (Vmax) here:
https://brainly.com/question/30874421#
#SPJ11
hypochlorous acid, hclo, has a pka of 7.54. what are [h3o ], ph, [clo-], and [hclo] in 0.125 m hclo? [h3o ]
The solution is acidic (pH < 7), and the majority of the hypochlorous acid molecules have dissociated into H3O+ and ClO- ions.
What is the dissociation of hypochlorous acid (HClO) in water?The dissociation of hypochlorous acid (HClO) in water can be represented as:
HClO + H2O ⇌ H3O+ + ClO-
The equilibrium constant expression for this reaction is:
Ka = [H3O+][ClO-]/[HClO]
We can use the following expressions to calculate the concentrations of the species in solution:
[H3O+] = Ka * [HClO] / [ClO-]
[ClO-] = [HClO] / (Ka/[H3O+])
[HClO] = 0.125 M (the initial concentration)
Substituting the given values, we get:
[ClO-] = [HClO] / (Ka/[H3O+]) = (0.125 M) / (10^(pKa - pH)) = (0.125 M) / (10^(7.54 - pH))
[H3O+] = Ka * [HClO] / [ClO-] = 10^(-pKa) * [HClO] / [ClO-] = 10^(-7.54) * [HClO] / [ClO-]
We can solve for pH by using the equation:
pH = -log[H3O+]
Substituting the expression for [H3O+], we get:
pH = -log(10^(-7.54) * [HClO] / [ClO-]) = -log(10^(-7.54)) + log([ClO-]/[HClO])
Simplifying the expression, we get:
pH = 7.54 + log([ClO-]/[HClO])
Substituting the given values, we get:
[ClO-] = (0.125 M) / (10^(7.54 - pH))
[H3O+] = 10^(-7.54) * (0.125 M) * (10^(pH - 7.54)) / (0.125 M / (10^(7.54 - pH)))
Simplifying, we get:
[ClO-] = 10^(-pH)
[H3O+] = 10^(-pH)
Finally, we can calculate the concentration of HClO using the expression:
[HClO] = [ClO-] * (Ka / [H3O+])
Substituting the calculated values, we get:
[HClO] = 10^(-pH) * (10^(7.54) / 10^(-pH)) = 10^(7.54 - 2pH)
Therefore, in 0.125 M HClO solution:
[H3O+] = [ClO-] = 10^(-pH)
[ClO-] = 10^(-pH)
[HClO] = 10^(7.54 - 2pH)
pH = 1/2(7.54 - log(0.125)) = 3.05
Substituting the pH into the expressions for [H3O+], [ClO-], and [HClO], we get:
[H3O+] = [ClO-] = 10^(-pH) = 9.13 × 10^(-4) M
[HClO] = 10^(7.54 - 2pH) = 1.98 × 10^(-4) M
This means that the solution is acidic (pH < 7), and the majority of the hypochlorous acid molecules have dissociated into H3O+ and ClO- ions.
Learn more about hypochlorous acid
brainly.com/question/16984896
#SPJ11
What is the activity series for Copper, Lead, and Zinc with the most active metal at the top of the list?
The activity series for Copper, Lead, and Zinc in order of decreasing reactivity (most active to least active) is:
Zinc > Copper > Lead
This means that Zinc will displace Copper and Lead from their salts in solution, Copper will displace Lead but not Zinc, and Lead will not displace either Copper or Zinc.
The activity series is a list of metals and their ions in order of their relative reactivity with each other. The most reactive metal is at the top of the list and the least reactive metal is at the bottom of the list.
This series helps to predict the outcome of a chemical reaction between two metals or their ions. When a metal is placed in a solution containing ions of another metal, the metal with a higher position in the activity series will replace the metal with a lower position in the activity series.
Visit here to learn more about activity series brainly.com/question/14129976
#SPJ11
calculate the equilibrium concentrations of all species when 15.0 ml of 0.100 m agno3 is mixed with 5.00 ml of 0.200 m nh3. the kf of [ag(nh3)2] is 1.7x107 .
The equilibrium concentrations of all species are; [Ag⁺] = 0.191 M, [NH₃] = 1.34 × 10⁻³ M, and [Ag(NH₃)₂]+ = 0.0800 M.
Write the balanced equation for the reaction between AgNO₃ and NH₃;
Ag⁺ + 2NH₃ ⇌ [Ag(NH₃)₂]⁺
Calculate the initial moles of Ag⁺ and NH₃;
moles of Ag⁺ = 0.100 M × 0.0150 L = 1.50 × 10⁻³ moles
moles of NH₃ = 0.200 M × 0.00500 L = 1.00 × 10⁻³ moles
Determine which reactant is limiting;
Ag⁺ is in excess because there are more moles of Ag⁺ (1.50 × 10⁻³ moles) than NH₃ (1.00 × 10⁻³ moles).
Calculate the moles of Ag⁺ that react with NH₃;
moles of Ag⁺ that react = 2 × 1.00 × 10⁻³ moles = 2.00 × 10⁻³ moles
Calculate the moles of Ag⁺ and [Ag(NH₃)₂]⁺ at equilibrium;
moles of Ag⁺ = 1.50 × 10⁻³ - 2.00 × 10⁻³ = -0.50 × 10⁻³ moles (excess)
moles of [Ag(NH₃)₂]⁺ = 2.00 × 10⁻³ moles
Calculate the concentration of [Ag(NH₃)₂]⁺ at equilibrium;
[Ag(NH₃)₂]⁺ = moles of [Ag(NH₃)₂]⁺ / total volume of solution
= 2.00 × 10⁻³ moles / (15.0 mL + 5.00 mL) = 0.0800 M
Calculate the concentration of NH₃ at equilibrium using the Kb expression for NH₃;
Kb = Kw / Ka(NH₄⁺) = 1.0 × 10⁻¹⁴ / 5.6 × 10⁻¹⁰ = 1.8 × 10⁻⁵
[NH₃] × [H⁺] / [NH₄⁺] = Kb
[0.2 - x] × x / [x] = 1.8 × 10⁻⁵
x² = 1.8 × 10⁻⁵ × 0.2
x = 1.34 × 10⁻³ M
Calculate the concentration of Ag⁺ at equilibrium;
Kf = [Ag(NH₃)₂]+ / [Ag⁺] × [NH₃]²
1.7 × 10⁷ = 0.0800 / [Ag⁺] × (0.00134 M)²
[Ag⁺] = 0.191 M
Check the assumptions; We assumed that Ag⁺ was in excess initially, and this was confirmed by our calculations. We also assumed that the reaction went to completion, and this is reasonable given the very large value of Kf.
Therefore, the equilibrium concentrations of all species are;
[Ag⁺] = 0.191 M
[NH₃] = 1.34 × 10⁻³ M
[Ag(NH₃)₂]+ = 0.0800 M
To know more about equilibrium concentrations here
https://brainly.com/question/16645766
#SPJ4
The equilibrium concentrations of all species are; [Ag⁺] = 0.191 M, [NH₃] = 1.34 × 10⁻³ M, and [Ag(NH₃)₂]+ = 0.0800 M.
Write the balanced equation for the reaction between AgNO₃ and NH₃;
Ag⁺ + 2NH₃ ⇌ [Ag(NH₃)₂]⁺
Calculate the initial moles of Ag⁺ and NH₃;
moles of Ag⁺ = 0.100 M × 0.0150 L = 1.50 × 10⁻³ moles
moles of NH₃ = 0.200 M × 0.00500 L = 1.00 × 10⁻³ moles
Determine which reactant is limiting;
Ag⁺ is in excess because there are more moles of Ag⁺ (1.50 × 10⁻³ moles) than NH₃ (1.00 × 10⁻³ moles).
Calculate the moles of Ag⁺ that react with NH₃;
moles of Ag⁺ that react = 2 × 1.00 × 10⁻³ moles = 2.00 × 10⁻³ moles
Calculate the moles of Ag⁺ and [Ag(NH₃)₂]⁺ at equilibrium;
moles of Ag⁺ = 1.50 × 10⁻³ - 2.00 × 10⁻³ = -0.50 × 10⁻³ moles (excess)
moles of [Ag(NH₃)₂]⁺ = 2.00 × 10⁻³ moles
Calculate the concentration of [Ag(NH₃)₂]⁺ at equilibrium;
[Ag(NH₃)₂]⁺ = moles of [Ag(NH₃)₂]⁺ / total volume of solution
= 2.00 × 10⁻³ moles / (15.0 mL + 5.00 mL) = 0.0800 M
Calculate the concentration of NH₃ at equilibrium using the Kb expression for NH₃;
Kb = Kw / Ka(NH₄⁺) = 1.0 × 10⁻¹⁴ / 5.6 × 10⁻¹⁰ = 1.8 × 10⁻⁵
[NH₃] × [H⁺] / [NH₄⁺] = Kb
[0.2 - x] × x / [x] = 1.8 × 10⁻⁵
x² = 1.8 × 10⁻⁵ × 0.2
x = 1.34 × 10⁻³ M
Calculate the concentration of Ag⁺ at equilibrium;
Kf = [Ag(NH₃)₂]+ / [Ag⁺] × [NH₃]²
1.7 × 10⁷ = 0.0800 / [Ag⁺] × (0.00134 M)²
[Ag⁺] = 0.191 M
Check the assumptions; We assumed that Ag⁺ was in excess initially, and this was confirmed by our calculations. We also assumed that the reaction went to completion, and this is reasonable given the very large value of Kf.
Therefore, the equilibrium concentrations of all species are;
[Ag⁺] = 0.191 M
[NH₃] = 1.34 × 10⁻³ M
[Ag(NH₃)₂]+ = 0.0800 M
To know more about equilibrium concentrations here
https://brainly.com/question/16645766
#SPJ4
Which of the following does NOT move thermal energy
through convection currents on Earth?
a the ocean
b the atmosphere
€ molten rock
What is the de Broglie wavelength (in m) of a 25 g object moving at a speed of 5.0 m/s? O 5.3 x 10-33 m O 1.3 x 10-34m O 5.3 x 10-36 m O 1.3 x 10-37 m O 6.0x 107 m
The de Broglie wavelength of the 25 g object moving at a speed of 5.0 m/s is 5.3 x 10^-34 m.
How to calculate the wavelength of an object?The de Broglie wavelength (in m) of an object is given by the equation λ = h/mv, where h is Planck's constant (6.626 x 10^-34 J*s), m is the mass of the object, v is the velocity of the object.
First, convert the mass from grams to kilograms:
25 g = 0.025 kg
Next, plug the values into the formula:
λ = (6.626 x 10^-34 Js) / (0.025 kg * 5.0 m/s)
Calculate the wavelength:
λ = (6.626 x 10^-34 Js) / (0.125 kg*m/s)
λ = 5.3 x 10^-34 m
To know more about de-broglie wavelength:
https://brainly.com/question/16629783
#SPJ11
The de Broglie wavelength of the 25 g object moving at a speed of 5.0 m/s is 5.3 x 10^-34 m.
How to calculate the wavelength of an object?The de Broglie wavelength (in m) of an object is given by the equation λ = h/mv, where h is Planck's constant (6.626 x 10^-34 J*s), m is the mass of the object, v is the velocity of the object.
First, convert the mass from grams to kilograms:
25 g = 0.025 kg
Next, plug the values into the formula:
λ = (6.626 x 10^-34 Js) / (0.025 kg * 5.0 m/s)
Calculate the wavelength:
λ = (6.626 x 10^-34 Js) / (0.125 kg*m/s)
λ = 5.3 x 10^-34 m
To know more about de-broglie wavelength:
https://brainly.com/question/16629783
#SPJ11
Calculate the number of moles of N2 produced from 0.080 moles of NH3 by the following reaction. 4 NH3 + 6 NO — 5 N2 + 6 H20
Answer: 0.10 moles of N2 are produced.
Explanation: You can find the number of moles of N2 produced from 0.080 moles of NH3 by doing mole ratios.
Since 5 moles of N2 is being produced for 4 moles of NH3, you can do
(0.080 moles of NH3 x 5 moles of N2) and then divide the number you get by 4 moles of NH3.
(0.080 x 5 moles)/4 = 0.10
Since 0.080 has 2 significant figures, your final answer also needs to have 2 sig figs.
How does the size of ice affect the rate of melting?
The larger ice cubes require more heat from the water to melt. To transfer more heat from the water requires more time. Therefore, it takes longer for the larger ice cubes to melt.
Calculate the ph when 56.0 ml of 0.250 m HCl is mixed with 40.0 ml of 0.150 m Ca(OH)₂
Therefore, the pH of the resulting solution is approximately 11.32.
The pH of the resulting solution, we need to find the moles of HCl and Ca(OH)₂ in the solution.
Moles HCl = (0.250 mol/L) x (0.0560 L) = 0.0140 mol
Moles Ca(OH)₂ = (0.150 mol/L) x (0.0400 L) = 0.00600 mol
Since HCl is a strong acid and Ca(OH)₂ is a strong base, they will react completely in a 1:2 ratio to form CaCl₂ and water:
2HCl + Ca(OH)₂ → CaCl₂ + 2H₂O
So, all of the HCl will react with twice as much Ca(OH)₂ to form CaCl₂, leaving behind 0.00200 mol of Ca(OH)₂ in solution.
Next, we can find the concentration of hydroxide ions in the solution:
[OH⁻] = (0.00200 mol) / (0.0960 L) = 0.0208 M
Finally, we can use the Kw expression to find the concentration of hydrogen ions:
Kw = [H⁺][OH⁻] = 1.0 x 10⁻¹⁴
[H⁺] = Kw / [OH⁻] = (1.0 x 10⁻¹⁴) / (0.0208 M) = 4.81 x 10⁻¹²
Learn more about ph Visit: brainly.com/question/26424076
#SPJ4
Ethylene glycol, is used as antifreeze for automobile engines. If you want to produce 2.00 kg of ethylene glycol from the reaction of C2H4Cl2 and Na2CO3 , what is the minimum amount of Na2CO3that is needed?
C2H4Cl2(l)+Na2CO3(s)+H2O(l)→C2H6O2(l)+2NaCl(aq)+CO2(g)
To calculate the minimum amount of Na2CO3 needed to produce 2.00 kg of ethylene glycol, we first need to determine the balanced chemical equation for the reaction. From the given equation, we can see that 1 mole of C2H4Cl2 reacts with 1 mole of Na2CO3 to produce 1 mole of ethylene glycol (C2H6O2).
The molar mass of C2H6O2 is:
C: 12.01 x 2 = 24.02 g/mol
H: 1.01 x 6 = 6.06 g/mol
O: 16.00 x 2 = 32.00 g/mol
Total: 62.08 g/mol
Therefore, 2.00 kg of ethylene glycol is equivalent to:
2.00 kg = 2,000 g
2,000 g / 62.08 g/mol = 32.24 mol
Since the reaction requires 1 mole of Na2CO3 for every mole of C2H4Cl2, we need at least 32.24 moles of Na2CO3. The molar mass of Na2CO3 is:
Na: 22.99 x 2 = 45.98 g/mol
C: 12.01
O: 16.00 x 3 = 48.00 g/mol
Total: 105.99 g/mol
Therefore, the minimum amount of Na2CO3 needed is:
32.24 mol x 105.99 g/mol = 3,417 g or 3.42 kg
So, we need at least 3.42 kg of Na2CO3 to produce 2.00 kg of ethylene glycol.
Learn more about ethylene glycol here:
https://brainly.com/question/10405060
#SPJ11
To produce 2.00 kg of ethylene glycol from the given reaction, a minimum of 2.87 kg of Na₂CO₃is needed.
The balanced chemical equation for the given reaction is:
C₂H4Cl₂(l) + Na₂CO₃(s) + H₂O(l) → C₂H₆O₂(l) + 2NaCl(aq) + CO₂(g)
From the equation, we can see that the mole ratio of Na₂CO₃ to C₂H₆O₂is 1:1. Therefore, we need to calculate the amount of Na₂CO₃ required to produce 2.00 kg of C₂H₆O₂.
The molar mass of C₂H₆O₂ is:
2 x (12.01 g/mol for C) + 6 x (1.01 g/mol for H) + 2 x (16.00 g/mol for O) = 62.07 g/mol
The number of moles of C₂H₆O₂ required to produce 2.00 kg (or 2000 g) can be calculated as:
n(C₂H₆O₂) = mass/molar mass = 2000 g/62.07 g/mol = 32.22 mol
Since the mole ratio of Na₂CO₃ to C₂H₆O₂ is 1:1, we need 32.22 mol of Na₂CO₃ to produce 32.22 mol of C₂H₆O₂.
The molar mass of Na₂CO₃ is:
2 x (22.99 g/mol for Na) + 1 x (12.01 g/mol for C) + 3 x (16.00 g/mol for O) = 105.99 g/mol
The mass of Na₂CO₃ required to produce 32.22 mol can be calculated as:
mass = n x molar mass = 32.22 mol x 105.99 g/mol = 3,425.8 g = 3.43 kg
Therefore, a minimum of 3.43 kg (or 2.87 kg considering the significant figures) of Na₂CO₃ is needed to produce 2.00 kg of ethylene glycol.
Learn More about Ethylene glycol
https://brainly.com/question/24213993
#SPJ4
note that in a successful separation scheme, solutions are always sepeerated from a solid before adding the next reagant why
In a successful separation scheme, it is essential to separate solutions from solids before adding the next reagent, this is because each reagent serves a specific purpose in the process, targeting particular components within the mixture.
By separating the solution from the solid first, you ensure that the desired reaction occurs only with the components in the solution, allowing for an accurate and efficient separation process. Additionally, the presence of a solid in the solution can interfere with the intended reaction, potentially causing unwanted side reactions or hindering the efficiency of the process. In some cases, the solid may even react with the reagent, which could lead to false results or the formation of unwanted by-products
Moreover, keeping the solution clear of solids also simplifies the analysis and identification of separated components, this allows for a more precise determination of the separated components and a more effective overall separation process. In summary, separating solutions from solids before adding the next reagent is crucial for maintaining the accuracy, efficiency, and reliability of a separation scheme. This practice ensures that the desired reactions occur without interference, minimizes the potential for unwanted side reactions, and facilitates the analysis of the separated components.
Learn more about solution at:
https://brainly.com/question/29195815
#SPJ11
Which of the following does NOT contribute to the high phosphoryl-transfer potential of ATP? A. ability of water to interact more favorably with the products of ATP hydrolysis than with ATP itself
B. adenine ring structure C. resonance stabilization
D. charge repulsion
In the high phosphoryl-transfer potential of ATP, the adenine ring structure does not have any contribution. Therefore, the correct answer is option B.
Phosphoryl-transfer potential is the ability of an organic molecule, this ability helps the molecule to transfer a phosphoryl group to another molecule known as the acceptor molecule. ATP has a high phosphoryl-transfer potential. The main factors that contribute to the high phosphoryl-transfer potential of ATP are:
-resonance stabilization -charge repulsion -stabilization due to hydration --increase in entropy
Therefore, adenine ring structure (option B) is the only factor that plays no role in the high phosphoryl-transfer potential of ATP.
To learn more about ATP's high phosphoryl-transfer potential, visit: https://brainly.com/question/28286963
#SPJ11
Given the unbalanced equation: Al2(SO4)3 + Ca(OH)2 + Al(OH)3 + CaSO4 What is the coefficient in front of the CaSO4 when the equation is completely balanced with the smallest whole-number coefficients? A. 1 B. 2 C. 3 D. 4
The balanced equation with the smallest whole-number coefficients is Al2(SO4)3 + 3Ca(OH)2 → 2Al(OH)3 + 3CaSO4. Therefore, the coefficient in front of the CaSO4 when the equation is completely balanced with the smallest whole-number coefficients is 3 (option C).
To determine the coefficient in front of the CaSO4 when the given unbalanced equation Al2(SO4)3 + Ca(OH)2 → Al(OH)3 + CaSO4 is completely balanced with the smallest whole-number coefficients, follow these steps:
Balance the aluminum (Al) atoms: Place a coefficient of 2 in front of Al(OH)3. Now the equation is:See more about equation in:
https://brainly.com/question/2972832
#SPJ11
when 56.6 g of calcium and 30.5g of nitrogen gas under go a reaction that has 90% yield, what mass of calcium nitride is formed?
90% of 100.2 g, or 90.18 g, of calcium nitride was produced.
What is chemical reaction?A chemical reaction is a process that changes one group of chemical constituents into another. As reactants are transformed into products, chemical bonds between atoms are formed and broken. Typically, this is an exothermic process that releases energy as heat or light.
Calcium nitride, also known as [tex]Ca_3N_2[/tex], is created by the interaction of calcium and nitrogen gas. The mass of calcium nitride that is produced when 56.6 g of calcium and 30.5 g of nitrogen gas are combined can be calculated using stoichiometry.
The reaction's balanced equation is as follows: [tex]3C_a+N_2- > Ca_3N_2[/tex]
Therefore, 3 moles of nitrogen are needed for every 1 mole of calcium. The following equation can be used to determine the moles of calcium
and nitrogen:
Moles of [tex]C_a[/tex] = 56.6 g / 40 g/mol = 1.415 mol
Moles of [tex]N_2[/tex] = 30.5 g / 28 g/mol = 1.089 mol
Since nitrogen is the limiting reagent and calcium and nitrogen have a mole ratio of 1.089:1.415, the following formula can be used to get the potential calcium nitride yield:
Theoretical yield = 1.089 mol × 92 g/mol = 100.2 g
The actual yield of calcium nitride is 90% of the theoretical yield because the reaction has a 90% yield. Therefore, 90% of 100.2 g, or 90.18 g, of calcium nitride was produced.
To know more about chemical reaction, click-
brainly.com/question/25769000
#SPJ1
what is the density of nitrogen gas at 1.98 atm and 74.5 ∘ c 1.98 atm and 74.5∘c ?
The density of nitrogen gas at 1.98 atm and 74.5°C is approximately 1.946 g/L.
To find the density of nitrogen gas at 1.98 atm and 74.5°C, we can use the Ideal Gas Law equation, which is PV = nRT. We will modify this equation to find the density (ρ) by using the formula: ρ = (PM)/(RT), where P is pressure, M is molar mass, R is the gas constant, and T is temperature.
1. Convert temperature to Kelvin:
T (K) = 74.5°C + 273.15 = 347.65 K
2. Use the values given in the problem and the constants:
P = 1.98 atm
M (molar mass of nitrogen, N₂) = 28.02 g/mol
R (gas constant) = 0.0821 L atm / (K mol)
3. Plug the values into the density formula:
ρ = (PM)/(RT) = (1.98 atm * 28.02 g/mol) / (0.0821 L atm / (K mol) * 347.65 K)
4. Calculate the density:
ρ = (55.476 g/mol) / (28.5093 L/mol) = 1.946 g/L
The density of nitrogen gas at 1.98 atm and 74.5°C is approximately 1.946 g/L.
Know more about Density here:
https://brainly.com/question/28929608
#SPJ11
Note that no organic solvent was added as an organic layer during extraction.a. What is the advantage? Why would this procedure be undesirable if the reaction was conducted at 1/50 of thescale of this procedure?b. What is the disadvantage of not using a solvent to rinse your reaction flask in the transfer to the separatoryfunnel?
a. The advantage of not adding an organic solvent during extraction is that it simplifies the procedure and reduces potential contamination or side reactions. b. The disadvantage of not using a solvent to rinse the reaction flask during the transfer to the separatory funnel is that some product may be left behind in the flask, leading to incomplete transfer and a lower yield.
a. The advantage of not adding an organic solvent as an organic layer during extraction is that it reduces the use of harmful solvents and makes the process more environmentally friendly. If the reaction was conducted at 1/50 of the scale of this procedure, it would still be advantageous to not use an organic solvent as it would still reduce the amount of waste generated and lower the environmental impact of the process. However, if the scale of the procedure is decreased, the yield of the extraction may decrease as well, making it less efficient.
b. The disadvantage of not using a solvent to rinse your reaction flask in the transfer to the separatory funnel is that it may leave residual product in the flask, leading to a lower yield of the desired compound. It may also contaminate the final product with impurities, affecting its purity and quality. Therefore, it is important to rinse the reaction flask thoroughly with a suitable solvent to ensure that all of the desired product is transferred to the separatory funnel for extraction.
Learn more about organic solvent here: brainly.com/question/31325351
#SPJ11
Why must the halogenated acetanilide 5 be transformed into the amine 6 before introducing iodine into the ring? Explain in terms of the activating power of amide vs amino groups, and the electrophilicity of the iodonium ion
The halogenated acetanilide 5 must be transformed into the amine 6 before introducing iodine into the ring because of the differences in activating power between amide and amino groups, as well as the electrophilicity of the iodonium ion.
Step 1: Understand activating power.
Activating power refers to the ability of a substituent to increase the reactivity of an aromatic ring towards electrophilic aromatic substitution (EAS). Amide groups (as in acetanilide) are weakly activating, while amino groups are strongly activating.
Step 2: Consider electrophilicity.
Electrophilicity refers to the ability of a molecule or ion to accept electrons from another molecule or ion. The iodonium ion is a highly electrophilic species, which means it readily accepts electrons from nucleophiles.
Step 3: Explain the transformation.
Since the iodonium ion is highly electrophilic, it requires a strongly activating group on the aromatic ring to facilitate the reaction. The amide group in halogenated acetanilide 5 is only weakly activating, which makes it difficult for the iodonium ion to react with the aromatic ring. By transforming the halogenated acetanilide 5 into the amine 6, you introduce a strongly activating amino group, which greatly increases the reactivity of the aromatic ring towards the electrophilic iodonium ion, allowing for the successful iodination of the ring.
To learn more about electrophilicity https://brainly.com/question/31051319
#SPJ11
what is the pH of a 0.3 M HF solution (Ka = 7.2 x 10-4)
The pH of a 0.3 M HF solution with a Ka value of 7.2 x 10⁻⁴ is approximately 1.84.
To determine the pH of a 0.3 M HF solution with a Ka value of 7.2 x 10⁻⁴, you'll need to use the Ka expression and the equilibrium concentration calculations.
For the dissociation of HF:
HF ⇌ H⁺ + F⁻
Ka expression: Ka = [H⁺][F⁻] / [HF]
Let x represent the concentration of H⁺ ions formed:
[H⁺] = x, [F⁻] = x, and [HF] = 0.3 - x
Plug in the values into the Ka expression:
7.2 x 10⁻⁴ = x² / (0.3 - x)
Assuming x is small compared to 0.3, we can approximate:
7.2 x 10⁻⁴ ≈ x² / 0.3
Solve for x, which represents [H⁺]:
x = √(7.2 x 10⁻⁴ * 0.3) ≈ 0.0145
Now, to find the pH, use the formula:
pH = -log[H⁺]
pH ≈ -log(0.0145) ≈ 1.84
Therefore, the pH of the 0.3 M HF solution is approximately 1.84.
Learn more about pH here: https://brainly.com/question/26424076
#SPJ11
write the second step of the aldol reaction using curved arrows to show electron reorganization. ethanal -->dilute aq NaOH --> aldol
The second step of the aldol reaction using ethanal and dilute aq NaOH involves the nucleophilic attack of the enolate ion on the carbonyl carbon of another ethanal molecule, forming a new C-C bond and an alkoxide ion.
In the aldol reaction, the first step is the formation of the enolate ion by the deprotonation of the alpha hydrogen of ethanal by NaOH. In the second step, the enolate ion acts as a nucleophile and attacks the electrophilic carbonyl carbon of another ethanal molecule.
The curved arrow originates from the negatively charged oxygen of the enolate ion and points towards the carbonyl carbon, indicating the movement of the electron pair.
As a result, the double bond between the carbonyl carbon and oxygen shifts to form a bond with the oxygen, creating an alkoxide ion. The new C-C bond and alkoxide ion ultimately lead to the formation of the aldol product.
To know more about nucleophilic attack click on below link:
https://brainly.com/question/31279781#
#SPJ11
Which is the pH-relevant equation when NH4Br dissolves in water? Kb of NH3 is 1.76x 10-5. O NH,(aq) + H2O() ㄹ NH4+(aq) + OH-(aq) O Br-(aq) + H2O() HBr(aq) + OH-(aq) O NH4 (aq)H20NHa(aa)+H3O (aq)
The pH-relevant equation is NH3(aq) + H2O(l) ⇌ NH4+(aq) + OH-(aq).
What is the pH-relevant equation when NH4Br dissolves in water?The pH-relevant equation when NH4Br dissolves in water, given that the Kb of NH3 is 1.76 x 10^-5, is:
NH3(aq) + H2O(l) ⇌ NH4+(aq) + OH-(aq)
Learn more about pH equation
brainly.com/question/16480786
#SPJ11