A 900 car parking lot is divided into 3 sections. There are 330 spots in Section 1. Section 2 holds 160 more than the amount of cars in Section 3. How many spots does Section 3 have?

AAA ( Angle - Angle - Angle) congruence rule is one of congruence postulate but not preferable, for showing the similarity in two triangles

Two triangles are said to be congruent if one can be superimposed on the other exactly by rigid body motion, and the congruence theorem gives the conditions under which this occurs.

AAA Congruence rule:

It is stands for angle-angle-angle Congruence rule. When all three angles of one triangle is equals to the corresponding angles of another triangle. but it is possible if and only if the corresponding sides of both triangles are equal and when all three sides of two triangles are equal to each other then we use SSS Congruence rule. So, it not considered as preferable congruence rule . For example, In ∆ABC and ∆PQR

all three angles of ∆ABC is equal to corresponding angles of ∆PQR. So,∆ABC and ∆PQR are congruent.

To learn more about AAA (angle-angle-angle) Congruence rule, refer:

https://brainly.com/question/29792706

#SPJ4

Answer:

(1) The answer is given in the paper.

(2) The answer is given in the paper.

(3) PT = 21.26 cm

Step-by-step explanation:

(1) the paper says the answer is 7.81 cm

(2) the paper says the answer is 42 cm

(3) The work is in the image that is attached to this response.

By applying direct proportion, the value of y when x is 17 is equal to 68.

Mathematically, a direct proportion or direct variation can be represented the following mathematical expression:

y = kx

Where:

Next, we would determine the constant of proportionality (k) as follows:

k = y/x

k = 156/39

k = 4

Now, we can calculate the value of y when x is 17;

y = kx

y = 4 × 17

y = 68.

Read more on proportionality here: brainly.com/question/12866878

#SPJ1

The Median of 23 will be 23.

How to calculate the Median?

A data set's median value is the point where 50% of the data points have values that are lower or equal to it, and 50% of the data points have values that are higher or equal to it. In a list of odd numbers, one would select the middle number with an equal number of numbers on either side of it to determine the median value. The numbers should be arranged in order, typically from lowest to highest, before calculating the median.

The middle pair must be identified, added, then divided by two in order to calculate the median value in a list of even integers. Once more, group the figures from lowest to highest.

The median will be the average of the two middle numbers, in our questions 23 and 23, the mean of which is 23 because there are an even number of values.

So the final answer will be 23.

To learn more about Median, visit: https://brainly.com/question/11237736

#SPJ4

AAS (Angle-Angle-Side) is the basic congruence criteria for proving the congruence ( similarity) of two triangles.

Two triangles are said to be congruent if all three corresponding sides are equal and all three corresponding angles are equal.

The basic terms of the agreement are as follows.

Now let's talk about AAS Consensus Criteria.

AAS Congruence Criteria: AAS Criterion stands for Angle-Angle-Side Criterion. According to the AAS criterion, two triangles are congruent if any two angles and excluded sides of one triangle are equal to the corresponding angles and excluded sides of the other triangle.

To learn more about AAS Congruence postulate, refer:

https://brainly.com/question/28039171

#SPJ4

Answer: the tradition is to use (x, y) as the order of the coordinate pair locating a point on a plane

Step-by-step explanation: A two-axis system of east-west and north-south was defined using the algebra coordinate system created by mathematician René Descartes in the 1600s

7 pens are obtained by adding 5 and 2. We receive 5 back after subtracting 7 pens and 2 pens. The procedures of addition and subtraction are reversed in this case.

Given,

Inverse operations;

Inverse operations, such as addition and subtraction, multiplication and division, are pairs of mathematical operations where one operation reverses the effect of the other. The term "inverse" refers to the reciprocal of a number, i.e., x - 1 = 1 / x. One results from multiplying a number by its reciprocal, or inverse.

Examples for inverse operations;

We get 7 pens when we mix 5 and 2. We now have 5 pens left after subtracting 7 pens and 2 pens. Addition and subtraction are inverse operations in this situation.

Learn more about inverse operations here;

https://brainly.com/question/12425007

#SPJ4

Answer:6 dollars

Step-by-step explanation:

1 dozen=12 oranges

3 dozen=36 oranges

36 divided by 6=6

6 times 1= 6 dollars

By analyzing and applying correct method we can solve for any given Y problem.

Analysis is the process of carefully examining something difficult in order to comprehend it or identify its key characteristics.

Explaining, rephrasing, or otherwise demonstrating your own understanding of something is the act of interpretation. An interpreter is a person who interprets from one language into another for the purpose of explaining what is being said to a non-native speaker.

Let any problem is represented as Y. We can solve Y problem by analyzing the situation that is presented in the problem and by applying right method or formula to get required solution of given problem.

To learn more about analysis visit the link:

https://brainly.com/question/1859113

#SPJ4

A three-term expression is called a trinomial.

Math is a powerful tool that can be used to solve a range of problems. From simple arithmetic to complex equations, math provides us with powerful tools to explore the world around us. One such tool is the trinomial, a three-term expression that can be used to represent a wide variety of mathematical problems. In this essay, we will explore the possibilities of trinomials, examining their structure, uses, and potential applications.

Trinomials are composed of three terms: a variable, a coefficient, and a constant. Each term can be used to represent a different aspect of a problem. The variable is typically either an x or a y, and is used to represent the unknown quantity in an equation. The coefficient is a number used to modify the variable, and the constant is a number that is not affected by the variable. Together, these three terms form a trinomial, which can be used to represent a wide range of mathematical problems.

Learn more about math expressions:

https://brainly.com/question/4541471

#SPJ4

Answer:

Elga is 22 years old

Step-by-step explanation:

Let A = Alvin's age

Let E = Elga's age

We have the equations:

A = E - 11

A + E = 33

Substitute A = E - 11 from the first equation into the second equation and solve for E

So, we have

A + E = 33

(E - 11) + E = 33

2E - 11 = 33

2E = 44

E = 22 years old

So, Alvin is 11 years old and Elga is 22 years old

15 is the standard deviation of 225 .

What is explained by the standard deviation?

You can tell how skewed the data is by looking at the standard deviation. It gauges how far away from the mean each observed value is.

                      Any distribution will have roughly 95% of its values within two standard deviations of the mean. Think about the following data: 2, 1, 3, 2, 4. The average and the sum of squares representing the observations' variances from the mean will be 2.4 and 5.2, respectively.

Variance is simply the square of the standard deviation (v=σ2) .

          So if the variance is 225,

                        σ=√225 or 15.

Learn more about Standard deviation

brainly.com/question/23907081

#SPJ4

The median of 2/3 and 4 is 2.33.

The median is the middle point in a dataset—half of the data points are smaller than the median and half of the data points are larger.

A data set's median value is the point where 50% of the data points have values that are lower or equal to it, and 50% of the data points have values that are higher or equal to it.

To arrange the data points in ascending order for a small data set, count the number of data points (n).

To get the rank of the data point whose value is the median when the number of data points is unequal, multiply the total by 1 and divide the results by 2.

Median = (2/3+4)/2 = 4.66/2 = 2.33

Thus, the median of 2/3 and 4 is 2.33.

To know more about the median visit: brainly.com/question/28060453

#SPJ4

To get the rank of the data point whose value is the median when the number of data points is unequal, multiply the total by 1 and divide the results by 2.

Median = (2/3+4)/2 = 4.66/2 = 2.33

Thus, the median of 2/3 and 4 is 2.33.

A. The mean of the data set is 71.09.

B. The median of the data set is the 12th term which is 74.

C. There is no mode value in the given data set.

D. Median value best represents the data.

A stem leaf method is used to represent discrete data.

The first column are the stem values and the second are the leaf values.

To find the mean of the data set we'll use the weightage average method

which is sum of all the values divided by the number of values.

∴ Mean = 71.09.

Total no. of data is 23 so the median is the 12th term which is 74.

There is no particular frequently occurring data hence no mode.

Median value best represents this data set as in the stem and leaf the most no. of data are in this row.

learn more about the stem leaf method here :

https://brainly.com/question/9798801

#SPJ1

the probability of risk increases with the extension of supply chain. The more we enlarge our business the more possibility of risk.

A supply chain refers a system of connection of the business elements such as raw materials, products, resources, profit, loss as well as all the activities of a running business organization.

the extent of possibility of occurring unexpected incident in a business. while going on with our business, we wish to extend our organization so as to earn reputation as well as gaining outstanding outcomes. But at the same time the chance of getting bad outcomes rises. It is termed as probability of risk.

hence, the above expression risk rises with increasing supply chain is true.

to know more about supply chain and risk visit:

https://brainly.com/question/18793688

#SPJ4

The mean formula in statistics for a set is defined as the sum of the observations divided by the total number of observations.

One of the most significant and often employed metrics of central tendency is the mean. In mathematics, there are various different kinds of means. In statistics, the mean is the product of all the values in a set of data divided by the total number of values in the data for a particular set of observations.

To put it another way, calculating the mean of a data set only requires adding up all the values and dividing the result by the total number of values.

However, depending on whether grouped or ungrouped data is provided, the basic approach and formulae change. Ungrouped data is a collection of random observations, whereas grouped data is a collection of individual observations of a variable aggregated into separate groups.

To know more about the mean visit: brainly.com/question/29895356

#SPJ4

To put it another way, all that is necessary to determine the mean of a set of data is to sum up all the values and divide the total by the number of values.

However, the fundamental approach and equations vary according on whether grouped or ungrouped data are presented. Ungrouped data is a collection of arbitrary observations, whereas grouped data is a collection of distinct groupings of individual observations of a variable.

The y-intercept is (0, 5). Hence, the intercepts of the equation 5x + 3y = 15 are (3,0) and (0,5).

To find the x-intercept we have to substitute y = 0 into the equation, as follows:

9x - 7*0 = -63

9x = -63

Dividing by 9 at both sides of the equation:

9x/9 = -63/9

x = -7

To find the y-intercept we have to substitute x = 0 into the equation, as follows:

9*0 - 7y = -63

-7y = -63

Dividing by -7 at both sides of the equation:

-7y/(-7) = -63/(-7)

y = 9

x-intercept: −7; y-intercept: 9

learn more about of intercept here

https://brainly.com/question/29113022

#SPJ4

Answer:

y = 5x + 10

Step-by-step explanation:

The equation is y = mx + b

m = the slope

b = y-intercept

We know slope 5 and y-intercept 10

So, our equation is

y = 5x + 10

The range() function outputs a list of numbers that starts at 0 by default, increases by 1 (by default), and ends before a given value .

The statistical range for a given data collection is the range of values between the highest and lowest values. Another way to show the range is to compare the top and lowest observation differences. The sample interval can be calculated by subtracting the highest number from the lowest. For continuous variables, the sample range is an essential measure of variability.

here ,

Python has a built-in method called range() that can be used to create a series of numbers.

The range() function accepts starting and ending values as inputs, which can be supplied by the user to construct a sequence .

The range() function outputs a list of numbers that starts at 0 by default, increases by 1 (by default), and ends before a given value .

To know more about range visit :-

https://brainly.com/question/28135761

#SPJ4

Sam spent two-fifth of his work day by answering email. He works for 9 hours.

Steps to translate and solve a word problem using algebraic expressions:

- Assign the unknowns to variables

- Translate the word into operators plus, less, multiply, or division

- Isolate the unknown

In the given problem, let p is the variable to express the total hours Sam worked yesterday.

He spent two-fifth of hi work day by answering email = 2/5 p

He spent 3.6 hours answering email yesterday, means:

2/5 p = 3.6

p = 5 x 3.6/2 = 9 hours

Hence, Sam worked for 9 hours.

Learn more about variables here:

https://brainly.com/question/28651633

#SPJ4

Test value for a test of the difference between these two population proportions would be 2.44

What is Proportion?

A proportion in math is when two ratios are equivalent, that means they are equal to each other.

To calculate the test value for the difference between the two population proportions, you will need to first calculate the sample proportions for each group.

The sample proportion for the group of students attending 2-year colleges is 105/300 = 0.35.

The sample proportion for the group of students attending 4-year universities is 20/225 = 0.089.

Next, you can use these sample proportions to calculate the test value using the following formula:

      test value =  [tex]\frac{p1-p2}{\sqrt{[(p1(1-p1)/n1) + (p2(1-p2)/n2)]} }[/tex]

where p1 is the sample proportion for the first group, p2 is the sample proportion for the second group, n1 is the sample size for the first group, and n2 is the sample size for the second group.

Plugging in the values from the problem, we get:

test value = [tex]\frac{(0.35 - 0.089)}{\sqrt{[(0.35(1-0.35)/300) + (0.089(1-0.089)/225)]} }[/tex]

Simplifying this expression gives us a test value of approximately 2.44. This is the test value for the difference between the two population proportions.

To know more about Proportion visit,

https://brainly.com/question/870035

#SPJ4

The total number of combinations is given by the product between the numbers of options, so there are 8 combinations.

Here we have 3 variables and each can take two values:

x = {x₁, x₂}

y = {y₁, y₂}

z = {z₁, z₂}

The total number of combinations is equal to the product between the number of options that we have for each variable, then the number of combinations is:

C = 2*2*2 = 4*2 = 8

C = 8

There are 8 combinations.

Learn more about combinations:

https://brainly.com/question/11732255

#SPJ1

The graph of the function h(x) is attached below.

What is a function?

A mathematical phrase, rule, or law that establishes the link between an independent variable and a dependent variable (the dependent variable). In mathematics, functions exist everywhere, and they are crucial for constructing physical links in the sciences.

Given function is h(x) = √(x-2) + 3

The radical function is always positive.

Therefore,

x - 2 ≥ 0

x ≥ 2

The domain of the function is [2, ∞)

The value of h(x) is at the lowest value of x that is x = 2.

h(2) = √(2-2) + 3

h(2) = 3

The range of the function is [3, ∞)

The starting point of the function is (2,3).

To learn more about graph, click on below link:

https://brainly.com/question/14813590

#SPJ1

Answer:

The graph of g(x) = (3x+5) + 8 will be shifted 8 units up from the graph of f(x). Specifically, the graph of g(x) will be 8 units higher than the graph of f(x) for all x.

Step-by-step explanation:

Answer: $7.65 for a dozen/12

Step-by-step explanation: 2.55 x 3

We divide the smaller number in HCF by the remaining after dividing the smaller number by the smaller number. Until there is no more remaining, we repeat the process.

For two or more numbers, HCF can be assessed. It is the most powerful factor for dividing any pair of numbers by either half or all of them. To illustrate: 15 is the biggest number that can divide both 60 and 75 perfectly, making it the highest common factor between those two numbers.

here

Step 1 is to divide the largest integer by the smallest number.

Step 2: Divide the first divisor by the first remainder, taking the divisor as the new dividend and the remainder as the new divisor.

Step 3: Continue until the remainder is 0 and the HCF of the given numbers is the last divisor.

To know more about HCF visit :-

https://brainly.com/question/29114178

#SPJ4

Multiplicity of 3 is the number of times that the value 3 appears as a root of an equation  is the multiplicity of 3 is 3

Multiplicity of 3 (also known as a 3-fold root) is a mathematical concept used to describe the number of times a certain value appears as a root (or solution) of an equation. Specifically, it refers to the number of times a certain value appears as a root of a given equation when the equation is solved.

For example, the equation x2 = 9 has three solutions: x = 3, -3, and 0. This means that the multiplicity of 3 is 3, because 3 appears three times as a root of the equation. The general formula used to calculate the multiplicity of a given root is:

Multiplicity of x = Number of times x appears as a root of the equation

In this case, the multiplicity of 3 is 3, because 3 appears as a root of the equation three times. Similarly, if there are two solutions, x = -2 and x = 0, the multiplicity of -2 is 2, because -2 appears as a root of the equation twice.

In summary, multiplicity of 3 is the number of times that the value 3 appears as a root of an equation when the equation is solved. In the example above, the multiplicity of 3 is 3.

Learn more about multiplicity here:

https://brainly.com/question/19943359

#SPJ4

Answer:

No

Step-by-step explanation:

Consider the graphs of [tex]y=2^x[/tex] and [tex]y=3^x[/tex].