a 7.4 g bullet leaves the muzzle of a rifle with a speed of 493.1 m/s. what constant force is exerted on the bullet while it is traveling down the 0.8 m length of the barrel of the rifle?

Answers

Answer 1

A 7.4 g bullet shoots out of a rifle's muzzle at 493.1 m/s per second. While the bullet is moving down the rifle's 0.8-m-long barrel, it experiences a constant force that is 2878.88N

Given mass of the bullet (m) = 7.4g

Speed of bullet (v) = 493.1m/s

length of barrel of rifle is (s) = 0.8m

Force exerted on the bullet  = F

To find the acceleration in the barrel,  we use equation v^2 = u^2+2as where u =0 as initially at rest

a = v^2/2s = 493.1x493.1/2x0.8 = 389036.176m/s^2

We know that the force (F) = mass x acceleration

F = 7.4 x 10-3x 389036.176 = 2878.88N

Hence the constant force exerted on the bullet is 2878.88N

To learn more about constant force click here https://brainly.com/question/29597873

#SPJ4


Related Questions

Starting from rest, you run to a speed of 6.5 m/s in a time of 1.2 seconds. Determine your acceleration

- .37 m/s^2
- 2.7 m/s^2
- 3.8 m/s^2
- 5.4 m/s^2

Answers

Answer: a = 5.4 m/s^2

Explanation:

a = Δv/Δt

a = (6.5 m/s)/(1.2 s)

a = 5.4 m/s^2

an outdoor thermometer ~sterl1l temperature of 40 f. five minutes after it is brought into a room where the temperature is 70 f. the thermometer registers 60 of. when will it register 65 ' f')

Answers

An outdoor thermometer ~sterl1l temperature of 40 f. five minutes after it is brought into a room where the temperature is 70 f. the thermometer registers 60 of. In 8.15 min it will register 65 f.

The physical concept of temperature indicates in numerical form how hot or cold something is. A thermometer is used to determine temperature. Thermometers are calibrated using a variety of temperature scales, which historically defined distinct reference points and thermometric substances. The most popular scales are the Celsius scale, sometimes known as centigrade, with the unit symbol °C, the Fahrenheit scale (°F), and the Kelvin scale (K), with the latter being mostly used for scientific purposes. One of the seven base units in the International System of Units is the kelvin (SI). The lowest temperature on the thermodynamic temperature scale is absolute zero, or 0 kelvin, or 273.15 °C. The third law of thermodynamics acknowledges that it cannot actually be reached experimentally but can only be very closely approached. At that temperature, it would be difficult to produce heat from a body. All areas of natural science, including physics, chemistry, Earth science, astronomy, biology, ecology, material science, metallurgy, mechanical engineering, geography, and most aspects of daily life, depend on temperature. These fields include medicine, biology, ecology, and most other branches of science.

To know more about temperature please refer: https://brainly.com/question/24969033

#SPJ4

Six vectors (a through f ) have the magnitudes and directions indicated in the figure. (Figure 1)1.Rank the vector combinations on the basis of their magnitude.Rank from largest to smallest. To rank items as equivalent, overlap them.a+cf+cda+ba+ea+d

Answers

The vector size→a Along X -axis is 2 When Mets size along with j -axis is 0

So the vector → a will be → a = 2^Me+0^j.

vector size → b Along X -axis is 0

When t size along with j-axis is−2

When ts so the vector → b will be →b = 0^− 2 ^j.

A vector represents movement from one point to another. Vector quantities have both direction and magnitude. A scalar quantity has only one quantity. A vector can be represented by a line segment with an arrow think about the problem

The f-vector has the results of the other two vectors. According to the parallelogram law of vector addition.

Let f be the resultant force of d and e

that's why,

d+e=f

Read more about vector;

https://brainly.com/question/25705666

#SPJ4

which has greater linear speed, a horse near the outside rail of a merry-go-round or a horse near the inside rail?

Answers

In the same period of time, the horses on the outside of the carousel must travel farther than the ones on the inside. Accordingly, the horses outside move at a faster linear speed than the horses at the hub.

On a merry-go-round, is the angular speed the same?

Every point on the surface of the merry-go-round revolves at exactly the same angular speed because it rotates as a single solid entity.

whose tangential speed is higher A horse near the outside rail or one towards the middle of the merry-go-round?

Which horse travels faster along a rail, one near the inside or one on the outside of a merry-go-round? neither because their linear speeds are equal.

To know more about linear speed visit:-

https://brainly.com/question/3930773

#SPJ4

That ame bird 2KG wa flying at 4MS toward my car and my car 12000 KG what wa going 30MS toward the bird what i not happening in term of velocity

Answers

A bird of 2Kg mass was flying at 4m/s towards a car and the car of mass 12000 Kg was going with 30m/s towards the bird, then the velocity of center of mass is 11250.35m/s

Given the mass of bird(m1) = 2kg

Mass of car (m2) = 12000kg

velocity of bird (v1) = 4m/s

velocity of car (v2) = 30m/s

Velocity of center of mass (V) = m1v1 + m2v2 / m1+m2

V = 2x4 + 12000x30 / 2+30 = 11250.35m/s

Hence the velocity of center of mass is 11250.35m/s

To learn more about velocity click here https://brainly.com/question/18084516

#SPJ4

it is ok to evaporate all the liquid so that the conical vial is completely dry.

Answers

When the bubbling stops, what appears to be liquid is actually molten solid, which won't evaporate but could breakdown under extreme heat.

What liquid matter means?

Particle are less closely packed in liquids than they are in solids. When maintained inside a container, liquids adopt that shape. Since there is a smaller room for movement among particles in liquid, compression is challenging. While liquids have a fixed volume, their shapes are not.

Why is water a liquid?

The significant difference in polarity between oxygen and hydrogen causes the water molecules to be dipolar. As a result, a tight hydrogen bond forms between the H & O of nearby water molecules, which explains why the water molecules are packed closely together.

To know more about liquid visit:

brainly.com/question/9716973

#SPJ4

Which term is the rate at which work is done? a. energy b. powerc. joulesd. force

Answers

Answer:

power

power is the rate of doing work. It is equivalent to an amount of energy consumed per unit time. In the SI system, the unit of power is the joule per second (J/s).

How does changing the frequency affect the wave speed

Answers

Answer:

Explanation:

Changing the frequency or amplitude of the waves will not change the wave speed, since those are not changes to the properties of the medium.

Answer:

Changing the frequency or amplitude of the waves will not change the wave speed

Explanation:

the displacement of a turn coordinator during a coordinated turn will a. indicate the angle of bank. b. remain constant for a given bank regardless of airspeed. c. increase as angle of bank increases.

Answers

As the angle of bank rises, a turn coordinator's displacement during a coordinated turn will also rise.

Turn coordinators show information about the speed and quality of the turn as well as the coordination of the turn. Turn and slip indicators solely display turn rate. The turn and bank indication was created. The relative strength of gravity and the inertia brought on by a turn are measured by this ball. The ball will move to the left while the toy airplane makes a turn to the right. What directly displays on the turn coordinator's small aircraft? both the roll and turn rates. A little airplane symbol that rolls (rotates) right or left depending on the bank angle and the rate of turn is used to indicate the turn coordinator's rate of turn.

To learn more about displacement click here https://brainly.com/question/11934397

#SPJ4

an fm radio station broadcasts electromagnetic radiation at a frequency of 92.6 mhz. what is the wavelength (in meters) of this radiation (speed of light

Answers

The wavelength of the electromagnetic radiation broadcasted by the FM radio station is 0.3 m.

The FM radio station is broadcasting the electromagnetic radiation at a frequency of 92.6 megahertz.

The relation between the frequency, wavelength and speed of the electromagnetic radiation is given by,

v = cy

Where,

c, y and v are the speed, wavelength and frequency of the electromagnetic radiation respectively.

The speed of the electromagnetic radiation will be equal to the speed of the light.

Now, putting all the values,

92.6 x 1000000 = y x 3 x 10^8

y = 0.3 m.

So, the wavelength of the FM electromagnetic radiation is 0.3m.

To know more about wavelength, visit,

https://brainly.com/question/10728818

#SPJ4


In a game of tug-of-war, two teams pull on opposite directions of a rope and there are two
important forces. If Newton's 3rd Law says the forces are equal, explain how it is possible to
win tug-of-war.

Answers

This phenomenon of motion in physics can be explained in the following manner,

In a tug-of-war the rope is pulled by the two competing teams simultaneously, each using an equal amount of force. The rope is pulled with equal force by both teams thanks to Newton's third law. If one team pushes harder, the other team will follow suit.

The power with which the teams press the ground determines whether one team wins or loses. The team that pushes the floor harder gets pushed back with identical intensity by the ground, causing them to stand up straight without losing their equilibrium.

As a result, the power by which the team pushes the floor determines who wins and who loses.

Read more about Newton's Third law of motion from:

https://brainly.com/question/29880909

a point-to-point microwave link is being implemented at 10 ghz using identical parabolic antennas on each end of 20 cm diameter and illumination efficiency of 90%. find the gain of these antennas. g

Answers

A point-to-point microwave link is being implemented at 10 ghz using identical parabolic antennas on each end of 20 cm diameter and illumination efficiency of 90%. 10 g X G means 10gG is the gain of these antennas.

Electromagnetic radiation that can be seen by the human eye is known as light or visible light. Typically, visible light is characterized as having wavelengths between 400 and 700 nanometers (nm), or frequencies between 750 and 420 terahertz, which fall between the longer-wavelength infrared and the shorter-wavelength ultraviolet (with shorter wavelengths). The term "light" in physics can be used to more broadly describe electromagnetic radiation of any wavelength, whether or not it is visible. Gamma rays, X-rays, microwaves, and radio waves are all forms of light in this sense. Intensity, illumination, propagation direction, frequency or wavelength spectrum, and polarization are the four main characteristics of light. One of the fundamental constants of nature is its speed in a vacuum, which is 299 792 458 meters per second (m/s). The wavelength of EMR affects how it behaves. While lower frequencies have longer wavelengths, higher frequencies have shorter ones. The behavior of EMR depends on the energy that each quantum of the field carries when it interacts with individual atoms and molecules.

To know more about illumination please refer: https://brainly.com/question/29156148

#SPJ4

FILL IN THE BLANK. the energy of a photon that has a frequency of 1.821 × 1016 s-1 is ________ j.

Answers

The energy of the photon is 1.21 *[tex]10^{-17} J[/tex]

Photons released during transition have an energy of

E = hv

E=(hc) / λ

where ,

h Planck's constant, which is equal to   6.626 x[tex]10^{-34}[/tex] J-s

v is frequency of photon

λ is wavelength of photon

Einstein's paradigm was built on the basis of two suppositions. He initially believed that light was made up of photons, which are tiny, discrete bundles of energy. Second, he predicated that the energy of a photon is inversely related to both its wavelength and its frequency.

substituting the values in above formula we get

E=( 6.626 x[tex]10^{-34}[/tex] J-s)  *(1.821 × [tex]10^{16}[/tex]  [tex]s^{-1}[/tex])

E= 1.21 *[tex]10^{-17} J[/tex]

To know more about Einstein's paradigm click below:

https://brainly.com/question/10809666#

#SPJ4

determine the equilibrium constant, k, at 25°c for a reaction in which δgo = −20.5 kj/mol.

Answers

3.92 ×[tex]10^{3}[/tex]  is  the equilibrium constant, k, at 25°c for a reaction in which δgo = −20.5 kj/mol. ΔGo and K are related by the equation ΔGo = -RT ln K.

For a chemical reaction, the equilibrium constant can be defined as the ratio of reactant to product that is used to determine chemical behaviour. The rate constants are constant at a given temperature.

The equilibrium constant is equal to the forward reaction rate constant divided by the reverse reaction rate constant.

The demand and supply function (Qa - bP = x + yP) can be used to calculate it. When the supply equals the demand, the equation yields an equilibrium price. Because we're supposed to be using active masses rather than molarity/concentrations of the respective substances, the equilibrium constant has no units.

For such more questions on Equilibrium :

brainly.com/question/10038290

#SPJ4

A canon fires a canon ball of mass m1= 12kg at a constant velocity v=20m/s. At the same time, canon ball 2 of mass m2=24kg is dropped from an equal height. The fired ball lands after time t1, while the dropped ball lands after time t2. Ignoring air resistance, determine the relationship between t1 and t2

Answers

The relationship between time of flight t₁ and t₂ is t₂² = 20t₁ +  4.9t₁² = t₂²

What is the time it takes for the two cannon balls to land?

The time it takes for the two cannon balls to land or the time of flight is determined using the equation below:

h = ut + ¹/₂gt²

where;

h is heightu is the initial velocityt is the time of flightg is the acceleration due to gravity

For ball 1:

h = 20t₁ + ¹/₂ * 9.8 * t₁²

For ball 2:

h = 0 * (t₂) + ¹/₂* 9.8 * t₂²

Equating the two values of h:

20t₁ + ¹/₂ * 9.8 * t₁² = 0 * (t₂) + ¹/₂ * 9.8 * t₂²

20t₁ +  4.9t₁² = t₂²

Learn more about the time of flight at: https://brainly.com/question/27717141

#SPJ1

Suppose cartAhas a mass of 3m and is moving at speed v. Cart B has a mass of m and is at rest. CartA collides perfectly inelastically with cart B. What is their combined speed after the collision?

Answers

The combined speed after the inelastic collision is equal to 0.75 v.

What is inelastic Collision?

An inelastic collision can be described as a type of collision that occurs between two objects in which some energy is lost. In the case of inelastic collision, momentum remains conserved but the kinetic energy will not be conserved.

Given, the mass of cart A, m₁ = 3 m

The mass of the cart B, m₂= m

The initial speed of cart A, u₁ = v

The initial speed of cart B, u₂ = 0

After the inelastic collision the momentum will remain conserved:

m₁.u₁ + m₂u₂ = m₁.v₁ + m₂ v₂

3m × v + m ×0 = (3m + m)× V

V = 3mv/4m

V = 0.75 v

Learn more about inelastic collision, here:

https://brainly.com/question/14521843

#SPJ1

A simple pendulum consists of a small object of mass m (the "bob") suspended by a cord of length l of negligible mass. A force F⃗ is applied in the horizontal direction (so F⃗ =Fi^), moving the bob very slowly so the acceleration is essentially zero. (Note that the magnitude of F⃗ will need to vary with the angle θ that the cord makes with the vertical at any moment.) (Figure 1) Part A Determine the work done by this force, F⃗ , to move the pendulum from θ=0 to θ=θ0. Express your answer in terms of the variables m, l, θ0, and appropriate constants. Enter the argument of trigonometric function in parenthesis. WF = SubmitMy AnswersGive Up Part B Determine the work done by the gravitational force on the bob, F→G=mg→. Express your answer in terms of the variables m, l, θ0, and appropriate constants. WG = SubmitMy AnswersGive Up Part C Determine the work done by the force F→T that the cord exerts on the bob. Express your answer in terms of the variables m, l, θ0, and appropriate constants. WT = I need hellp with part c

Answers

The work done by the the force is mg ( 1 - cosθ₀ ). The work done by the gravitational force on the bob is - mgl ( 1 - cosθ₀) . The work done by the force that the cord exerts on the bob is always zero.

(A) Mass of the bob = m

Length of the chord = l

Magnitude of force = f

Initial acceleration = 0

Initial angle = θ₀ = 0

Final angle = θ

Distance travelled = s = Final angle  - Initial angle

The work done is proportional to force and displacement. It can be determined as W.

Work done by the force = W =

= W = ΔU

= W = mgh

= W = mg ( 1 - cosθ₀ )

Here, we used the work energy theorem to solve for the work done by the horizontal force.

(B) The work done by gravitational force is = W

= W = F.x

= W = mgl ( 1 - cosθ₀) X cos180

= W = - mgl ( 1 - cosθ₀)

(C) The tension that cord exerts on the bob is always at the angle of 90.

The work done is given as,

= W = F.x

= W = F. x X cos90

= W = 0

To know more about Work Done:

https://brainly.com/question/28727088

#SPJ4

if a particle's speed increases by a factor of 5, by what factor does its kinetic energy change?

Answers

The kinetic energy would increase by a factor of 25.

The kinetic energy of a moving body is a function of its mass and the velocity with which it is traveling. It can be expressed by the formula:

KE=1/2mu²

This suggests that the kinetic energy a body has varies directly with mass and with the square of the velocity. With this knowledge, we can easily figure out how it changes when the speed is altered by a certain factor. Assuming that the initial speed of a body of mass m was u, the initial kinetic energy of the body would be:

KE = 1/2mu²

Now that the speed is increased by a factor of of 5, the final speed y would be equal to 5 times the initial speed u, such that v=5u. The kinetic energy of the body would then be:

KE = 1/2m²

KE = 1/2m(5u)

KE = 1/2m(252)

Pulling out 25 and replacing the expression for the initial kinetic energy:

KE = 25.1/2mu²

KE = 25KE

So, on increasing the velocity by a factor of 5, the kinetic energy would increase by a factor of 25.

What is kinetic energy

Kinetic energy is the energy possessed by an object caused by the force of motion. The term kinetic comes from the Greek, 'kinetikos', which means to move. Therefore, an object moving at a certain speed must have kinetic energy, while an object that is not moving does not have kinetic energy.

Kinetic energy is also called motion energy, where the movement of an object can produce other energy. For example, motion energy can be turned into electrical energy, eventually that electrical energy can be utilized by humans.

Types of kinetic energy

Kinetic energy is divided into two types which are classified based on the movement of an object, namely:

Translational kinetic energy

This type of translation is kinetic energy produced by objects moving in a straight line with the same direction and speed. For example, a car driving on a highway and a bullet moving in a straight line.

Rotational kinetic energy

This is a condition when an object rotates. When rotating, the amount of energy in it can change. For example, the rotation of the earth around the sun, a spinning top that rotates on its axis, and a Ferris wheel.

Learn more about kinetic energy at https://brainly.com/question/26472013.

#SPJ4

three resistors, 1-ohm, 2-ohm, and 3- ohm are connected in parallel. if they were connected in series instead their equivalent resistance would be

Answers

They would have an 11-times higher equivalent resistance if they were joined in series.

What is an example of resistance?

Consider the scenario of a person navigating a busy market and encountering difficulty moving from one business to another to better understand resistance. Undoubtedly, this circumstance is comparable to a particle trying to pass through a wire.

What factors affect resistance?

An electrical conductor's resistance is determined by its length, resistivity, and cross-sectional area. The relationship between conductance and resistivity must be understood; the more conductive that anything is, the less resisting it is.

To know more about resistance visit:

https://brainly.com/question/29427458

#SPJ4

The complete question is-

three resistors, 1 ohm, 2 ohm, 3 ohm are connected in a parallel. if they were connected in series instead their equivalent resistance would be

a. 13 times as great

b. 11 times as great

c. 9 times as great

d. 7 times as great

e. none of the above

a chest x-ray is taken using 100 kvp and 2 mas and produce 32 mr of radiation. if the mas is changed to 4 mas how much radiation will be produced?

Answers

According to the question radiation will be produced is 64 mR.

What is a straightforward explanation of radiation?

The energy that emanates from a point and moves across space at the rate of light is referred to as radiation. This energy has wave-like qualities and is accompanied by an electric field as well as a magnetic field. Radiation may also be referred to as electromagnetic waves.

Briefing:

Intensity 1 / Intensity 2 = mAs 1 / mAs 2

Intensity 1 = 32mR

Intensity 2 = ???

⇒MAs 1 = 2

⇒MAs 2 = 4

⇒32mR / x = 1/2

⇒x= 64 mR

To learn more about radiation visit:

https://brainly.com/question/13934832

#SPJ4

what is the molarity of h2o2 after four half-lives if the initial concentration of h2o2 is 0.30 m?

Answers

Upon calculation the molarity of H₂O₂ after four half lives if the initial concentration of H₂O₂ is 0.30M is found to be 0.01875 M

This question can be solved using the concept of first order reaction

Every reaction has its own tempo. A glass of milk will begin to get sour in approximately an hour if left on a sunny windowsill. But when potassium metal is added to water, it reacts quickly and strongly. Two factors affect how quickly a reaction occurs. The first is the rate constant (k), which varies depending on the kind of reaction and is temperature-dependent. The second factor is the reactant concentration. The sequence of the reactions determines how the concentration influences the rate.

For a first order reaction,

ln[tex](\frac{A}{A_{o} })[/tex]= Kt

here, A= initial concentration

[tex]A_{0}[/tex]= concentration at a time t

K= Rate constant

t= time

A= 0.30 M

ln[tex](\frac{A}{A_{0} })[/tex]= k× 4[tex]t_{1/2}[/tex]

ln([tex]\frac{0.30}{A_{o} }[/tex])= k×[tex]\frac{4 ln2}{k}[/tex]

[tex]\frac{0.30}{A_{0} }[/tex]= 2⁴

[tex]\frac{0.30}{16}= A_{0}[/tex]

[tex]A_{0}[/tex]= 0.01875M

We can learn more about first order reaction here:

https://brainly.com/question/12446045#
#SPJ4

xif 54 j of work is needed to stretch a spring from 10 cm to 16 cm and another 90 j is needed to stretch it from 16 cm to 22 cm, what is the natural length (in cm) of the spring? cm

Answers

the natural length (in cm) of the spring is 4 cm

Calculation :

Let a = natural length of string from given data

54 = k/2(16-a)² - k/2(10-a)²

108 = k[256 + a² - 32a - 100 - a² + 200]

108 = k[156 - 12a]

9 = k[39 - 3a]   ------ 1

90 = k/2(22-a)² - k/2(16-a)²

90 = k(114 - 6a)

15 = k(19 - a) --------2

solving eqn 1 and 2

15/9 = (19k - ka)/(13k - ka)

15/9 = (19- a) / (13 - a)

24 = 6a

a = 4 cm

the natural length (in cm) of the spring is 4 cm.

Work is a force over distance. Examples of jobs include lifting objects against gravity, driving cars up hills, and pulling down trapped helium balloons. Work is a mechanical manifestation of energy. The usual unit of work is the joule (J), which is equivalent to the Newton meter (N m).

Learn more about work here : https://brainly.com/question/25573309

#SPJ4

one month ago, did you have to look east or west of the highest constellation that you saw to see the constellation that is highest now at midnight?

Answers

Observers need to look to the west to be able to see the highest constellation one month ago.

A constellation is a group of stars that appear connected to form a special configuration. In three-dimensional space, most of our stars have no relationship with each other but can appear as clusters on the night sky globe.

The constellation that was highest in the sky at midnight a month ago would be in the western sky at midnight, for its rise meant it had to rise earlier to get that far.

The Earth also orbits the Sun, causing different parts of the galaxy to appear at different points in Earth's orbit. This means that if you look at one group of stars one month, they will appear in a different place the next month.

Learn more about the highest constellation at https://brainly.com/question/29886101

#SPJ4

a mass of sunken lead is resting against the bottom in a glass of water. you take this lead, put it in a small boat of negligible mass, and float the boat in the water.
A. The sunken lead displaces a volume of water equal to the lead's own volume.
B. The floating lead displaces a volume of water equal to the lead's own volume.
C. The sunken lead displaces a volume of water whose weight equals the lead's weight.
D. The floating lead displaces a volume of water whose weight equals the lead's weight.

Answers

A amount of water corresponding to the submerged lead's own volume is displaced by it, and A volume of water equal to the weight of the floating lead is displaced by the floating lead.

In a definition, what is mass?

A measured amount of rigidity, a fundamental characteristic of all matter, is known as mass in physics. The resistance an unit of matter gives to one change in its pace or location as a result of the applying of a force is what it is in essence.

How much mass does a body have?

(a) A body's mass is how much matter is there inside of it. Kg is really the SI mass measurement unit. (kg). (b) The force that pulls a body toward the center of the earth is the load of that body.

To know more about Mass visit:

https://brainly.com/question/25121535

#SPJ4

calculate the number of elastic collisions needed to reduce the energy of a 1 mev neutron to 0.2 mev through collisions between the neutron and carbon nuclei

Answers

The number of collisions is 26. An elastic collision is one in which the system does not experience a net loss of kinetic energy as a result of the collision.

Two objects collide in an elastic collision when no kinetic energy is wasted. The kinetic energy and momentum of the objects are conserved when they bounce back from one another. We are dealing with an elastic collision because inelastic collisions are thought to happen when the two items stay together after the collision.

Initial energy equals E o

=2MeV=2×10 6 \s eV

After the initial collision, E 1 = 2 E o

​After a second collision, E 2 equals 2 E 1.

​​ \s = \s2 \s2

E \so \s​

When there is a third collision, E 3 equals 2 E 2.

​​ \s = \s2 \s3

E \so \s​

And so

Following n collisions, E n = 2 n

E \so \s​

final energy = 0.04 eV

Consequently, E n = 0.04

⟹ \s2 \sn

2×10 \s6

​ \s =0.04

⟹2 \sn \s = \s0.04 \s2×10 \s6

​ \s =5×10 \s7

n=log 2 (510 7 )=log 10 2 log 10 (510 7 )

​⟹n= \s0.301 \s7+0.699

​⟹n=26

Learn more about collision here-

https://brainly.com/question/28986861

#SPJ4

On the construction site for a new skyscraper, a uniform beamof steel is suspended from one end. If the beam swings back andforth with a period of 2.00 s, what is its length?

Answers

A uniform steel beam is suspended from one end on the construction  site of a new skyscraper. The beam's length is 0.99 m if its back-and-forth motion has a period of 2.00 s.

A simple pendulum is a beam suspended from one end. Simple pendulums are mechanical devices that move in a predictable pattern.

The formula for the time period of a simple pendulum whose length is 'l' is

T = 2[tex]\pi[/tex] [tex]\sqrt{\frac{l}{g} }[/tex]

Here, g is the acceleration due to gravity.

The time period of the beam is given as 2.00 s.

We can deduce from the preceding formula that

l = [tex]\frac{T^{2}g }{4\pi ^{2} }[/tex]

We have gravity acceleration, g = 9.8 m/[tex]s^{2}[/tex]

π = 3.14

and T = 2.00 s

So,

l= [tex]\frac{(2.00)(2.00)(9.8)}{4(3.14)(3.14)}[/tex]

or,

l = [tex]\frac{39.2}{39.4}[/tex]

or, l = 0.99 m.

As a result, the length of the beam is 0.99 m.

For more such questions on Time period :

brainly.com/question/569003

#SPJ4

why do the terrestrial planets have relatively meager atmospheres compared with those of the jovian planets?

Answers

The terrestrial planets receive more heat from the Sun and have a lower gravitational pull than the Jovian planets, which receive less heat from the Sun and have a much higher gravitational pull.

Because they are large and composed mostly of gas they are sometimes called gas giants. Small amounts of rocky material are found only deep within the core of Jupiter's planet. In the solar system, Jupiter planet is farther from the Sun than the terrestrial planets and is therefore cooler.

Terrestrial planets formed from rocky and metallic planetesimals but were ultimately too small to capture the large amounts of hydrogen and helium gases abundant in the solar nebula. But Jupiter's planet formed far from the Sun where ice and rock were abundant.

Learn more about Terrestrial planets here:-https://brainly.com/question/7633968

#SPJ4

a ball is shot from the ground straight up into the air with initial velocity of 46 46 ft/sec. assuming that the air resistance can be ignored, how high does it go?

Answers

The ball may fly up to a height of 27.56 feet. A ball is thrown up into the air, yet although though it rises into the air, the direction and velocity of the ball are actually downward.

As it rises, the ball's speed slows until the very apex of its motion, where it briefly pauses. At the peak, it accelerates at -9.8 m/s2.

the settings provided.

initial ball velocity (u) = 42 ft/s initial ball acceleration (a) = 32 ft/s2

The following formula is used to determine the ball's highest possible height:

v² = u²- 2gh

where;

When the ball is at its highest point, its velocity is zero.

0 = u² - 2gh

2gh = u²

The ball can therefore go a maximum height of 27.56 feet.

Learn more about speed here-

https://brainly.com/question/28484577

#SPJ4

what is the angle between the beam that is reflected at the water surface and the beam that is transmitted into the water?

Answers

The critical angle for water is 49 degrees, calculated as the angle between the beam and a line perpendicular to the surface.

What alternative word would you use for reflecting?

Cogitate, deliberate, reason, conjecture, and think are a few words that frequently replace the word reflect. All of these terms indicate "to utilize one's faculties of imagination, reasoning, or inference," but reflect denotes thoughtful deliberation over a memory that has just come to mind.

What response is reflected?

When light reflects off of something, it does so. The light will reflect at the same angle it struck the surface if the surface is smooth and shining, such as glass, water, or polished metal. Specular reflection is the name for this. A smooth surface allows light to bounce back at the same angle that it was incident.

To know more about Reflected visit:

https://brainly.com/question/13069673

#SPJ4

you are swinging a tin can around your head in a perfectly horizontal circle and its acceleration is 32 m/s2. if its speed is 4 m/s what is the value of the radius of its circular path? group of answer choices

Answers

The radius in the circular path is 2m.

A circle's or sphere's radius is any line segment that connects the object's center to its perimeter in classical geometry. In more contemporary usage, it is also the length of such line segments. The word "radius" is derived from Latin and means "ray" as well as "the spoke of a chariot wheel."

We are given that,

Acceleration = a = 32 m/s²

Speed = v = 4m/s

Thus , the radius of the circular path can be calculated by the formula,

a = v²/r

Where a is acceleration , v is speed and r is the radius of the circular path,

r = v²/a

r = (4m/s)²)/(32m/s²)

r = 2m

Hence the radius r of the circular path would be 2m.

To know more about circular path

https://brainly.com/question/29410787

#SPJ4

Other Questions
a perfectly competitive firm currently produces 1,000 units of output and hires its resources in a perfectly competitive factor market. it uses both labor and capital as inputs. the price of labor is $40; the price of capital is $100. the marginal product of labor is 8 units, and the marginal product of capital is 10 units. which of the following must be true? responses IThe firm is currently maximizing its profit.The firm can produce more than 1,000 units without increasing the total cost if it uses more labor and lesscapital.The firm can produce more than 1,000 units without increasing the total cost if it uses more capital and lesslabor.The firm can reduce the cost of producing 1,000 units by using less capital and employing the same amountof labor.The firm can reduce the cost of producing 1,000 units by employing less labor and using the same amountof capital. all of the following are true statements about meiosis in mammals except: responses it serves as a factor in bringing about variation among offspring. it serves as a factor in bringing about variation among offspring. it follows dna replication. it follows dna replication. it occurs only in reproductive structures. it occurs only in reproductive structures. it produces cells with the haploid number of chromosomes. it produces cells with the haploid number of chromosomes. it produces four genetically identical gametes. In 5 paragraphs (Introduction, 3 body, conclusion) discuss 3 ways that classism has played a role in the story "The Pearl"Include evidence from the story in your essay.Type and submit here.Be mindful of grammar and spelling. what is a forum? third-party ad servers who deliver ads from one central source. billboards that spread across the top or bottom of the web page. sites that act as brokers for advertisers and web sites. sections of sites that connect individuals around a specific topic. sites primarily involved in tracking people's behavior on the internet write the calculate average function. this function accepts a single integer argument, x, and returns the value of (1 2 3 .. x)/x. a nongovernmental not-for-profit organization may report on which of the following basis and remain in compliance with generally accepted accounting principles (gaap)? Nakida read that the number of time a cricket chirp depend on the temperature of the air. The cientit found that the number of chirp per minute i equal to 0. 23 time the temperature of the air, in degree Fahrenheit, plu forty. X y a. Write an equation that repreent the number of time a cricket chirp given the temperature in degree Fahrenheit A manufacturer of floor mops would like her product to last 700 hours, on the average. She hopes the mean number of hours is not a lot less than 700 (people will not continue to buy her product) or a lot more than 700 (people would seldom have to buy the product). However, the manufacturer has reason to believe the mean may have changed. A random sample of 48 items shows that sample mean = 675 and sample standard deviation = 77 hours. Use the significance level =.05. What is the appropriate test to perform? Regarding the hypothesis testing in question 1, what is the rejection region? Regarding the hypothesis testing in question 1, what is the p-value of the test? Round your answer to four decimal places Regarding the hypothesis testing in question 1, what is your conlusion? This question has several parts that must be completed sequentially. If you skip a part of the question, you will not receive any points for the skipped part, and you will not be able to come back to the skipped part. If $6000 is invested at 4% interest, compounded annually, then after n years the investment is worth an = 6000(1.04) dollars. Exercise (a) Find the first five terms of the sequence {an}. Step 1 For an = 6000(1.04)", we have a = 6000(1.04) 6240 6240.00 and a2 = 6000(1.04) = 6489.6 6489.60 Step 2 Rounding answers to two decimal places, we similarly have a3 = 6749.184 ,24 = 7019.151 ,ag = 7299.197 X Submit Skip_(you cannot come back) Exercise (b) Is the sequence convergent or divergent? Step 1 Since 1.04 is greater than 1, we have the following. (If an answer does not exist, enter DNE.) lim (1.04)" = 6000n + 1 6000n n00 x Submit Skip (you cannot come back) While browsing the Internet, a pop-up browser windows is displayed warning you that your system is infected with a virus. You are directed to click a link to remove the virus. What should you do? - Run a full system scan using anti-malware software installed on your system. What happens to the whole House of Representatives during the midterm elections The mass of the uniform slender rod is 3 kg. Determine the position x for the 1.2-kg slider such that the period is 1 s. Assume small oscillations about the horizontal equilibrium position shown. the texas regulars, a group within the texas democratic party, opposed which of the following? your customer has an iphone 8 and wants to read and write nfc tags with it. what advice will you give them? (choose two.) a racecar traveling at a constant speed of 50 m/s drives around a circular track that is 500 m in diameter. what is the magnitude of the radial acceleration of the car? which set of adjective pairs correctly describes the clusters into which dsm personality disorders are grouped? How do Mexicans celebrate Christmas? how did the film liberty story want to make you feel about the patriots and the revolutionary war? explain with examples from the film.8-10 sentencesITS ON DISNEY PLUS IF YOU NEED HELP a 1.5 kg block is sliding on a frictionless surface with a speed of 12 m/s when it crashes into a horizontal spring. the spring has a spring contstant of 2100 n/m. how far will the spring be compressed wehn the box's speed has been reduced to exactly half its speed? use the following information and the indirect method to calculate the net cash provided or used by operating activities: