Answer:
294
Explanation:
5x9.8x6=294
potential energy=5(9.8)(6)
Equation
PE=MGH
The _____ the activation energy, or the _____ the temperature, the larger the fraction of sufficiently energetic collisions, the greater the value of k, and the greater the reaction rate.
Higher temperatures or lower activation energies result in more sufficiently energetic collisions, which increases the fraction of such collisions, increases the value of k, and increases reaction rates.
What are the four components of the collision theory?The consequences are explained by the collision theory. These variables include temperature, catalysts, surface area, concentration, and reactant type. Each of these influences raises the number and energy of collisions, which increases reaction rate.
What among the three crash theories holds true here?The hypothesis states that responding particles usually collide without reacting. For interactions to take place, reacting particles need to collide with enough energy, in the appropriate direction, and with enough mass.
To know more about energetic collisions visit:
https://brainly.com/question/15069162
#SPJ4
The general driving forces behind most chemical interactions is the need for atoms to be electrically neutral and to: O donate Hydrogen ions O complete their nucleus O donate Hydroxyl ions O complete their outer electron orbital area (shell)
The general driving forces behind most chemical interactions is the need for atoms to be electrically neutral and to complete their outer electron orbital area (shell).
When both the cases are fulfilled i.e. when the enthalpy change is negative and the entropy change is positive, the reaction is said to be spontaneous and thus enthalpy and entropy are the two thermodynamic driving forces of chemical reactions.
Formation of a solid (precipitate)The creation of water.Electron transfer.Gas formationThere are several factors that affects the driving force:
1. Release of heat (exothermic reactions are driven)
2. Free energy – the change in free energy should be negative
3. Entropy – An increase in entropy drives a reaction
4. Equilibrium Shift - Removal of products drives the reaction
The general driving forces behind most chemical interactions is the need for atoms to be electrically neutral and to complete their outer electron orbital area (shell).
To know more about driving forces,
https://brainly.com/question/24378707
#SPJ4
a spring with a spring constant of 49 n/m has a 7.2 kg mass hanging from the bottom of it how fast is the mass moving when it passes the equilibrium point
Answer:
ω = (K / M)^1/2 fundamental frequency for Simple Harmonic Motion
ω = (49 kg-m / (sec^2 - m) * 7.2 kg)^1/2 = 2.61 /sec
F = -K A Hooke's Law and spring constant
A = 7.2 kg * 9.80 m/s^2 / 49 n/m = 1.44 m amplitude
V = ω A = 2.61 / sec * 1.44 m = 3.6 m/s maximum speed
By definition, if one coulomb of charge passes between two electrodes that differ in potential by one volt, one __________ of energy is released. This relationship is correctly expressed as V = ______/______.
one of released energy for each coulomb of charge that travels across electrodes with a one volt potential difference. V joule, J/C is the correct way to describe this relationship.
What do the electrodes in your body do?A tool that transfers electricity from just an instrument to something like a patient for therapy or surgery. Examples include a tiny metal plate or needle. In order to help recorders diagnose certain problems, electrodes can also transport electrical impulses from the heart, brain, muscles, skin, or other physiological regions.
Simply put, what is an electrode?An electrode is a conductor for electricity that establishes electrical contact with nonmetallic components of a circuit, like an electrolyte, a semiconductor, or a vacuum. This may also go by the names anode or cathode if it is a part of an electrochemical cell.
To know more about electrodes visit:
https://brainly.com/question/17060277
#SPJ4
at a given temperature, the values of rate constants for the forward and reverse reaction are ____ and the ratio of k is equal to the ____ constant for the reaction.
The ratio of k is equal towards the temperature constant for such reaction constants at a certain temperature, and the values of the rate constants for the forward or reverse reactions are concentrations at that temperature.
What are forward and reverse reactions?A forward response is a reversible reaction wherein products are created from reactants so it moves from left to right. A reversible reaction that moves from right to left is referred to as a backward reaction since reactants are created from products.
What do you call a reversible reaction?In some oxidation processes, the reaction's products might combine to form the reactants' original form. Reversible reactions are what they are referred to as. To illustrate them, use the formula: A + B C + D.
To know more about reversible reaction visit:
https://brainly.com/question/16614705
#SPJ4
The values of the rate constants for the forward or reverse reactions are concentrations at that temperature, and the ratio of k is equal towards the temperature constant for such reaction constants.
Why is a reaction reversible?
A chemical reaction that is reversible occurs when the reactants generate products, which then combine to return the reactants to their original state.
When the rate of the forward reaction and the rate of the reverse reaction are equal, equilibrium is reached. At equilibrium, the concentrations of all the reactants and products are fixed. The amount of reactant to product in a chemical reaction can be compared to derive the equilibrium constant, which is used to predict chemical behavior. The rate constants are fixed at some temperature.
To learn more about equilibrium constant use link below:
https://brainly.com/question/19340344
#SPJ4
For the chain: linear density =ρ, length =l. The chain is placed on the smooth plane. As shown in the figure, the drooping length =b, the chain is stationary at this moment (v=0). Then, under the action of the gravity, the chain drop freely. Determine the speed of the chain when the left end of leave the plane.
For the chain: linear density =ρ, length =l. The chain is placed on a smooth plane. The speed of the chain when the left end leaves the plane is the same as its initial speed, which is zero.
What is speed?Generally, To determine the speed of the chain when the left end leaves the plane, we need to consider the forces acting on the chain and use Newton's second law to find the acceleration of the chain.
The forces acting on the chain are the force of gravity and the normal force from the plane. The force of gravity is downward and is equal to the weight of the chain, which is given by the equation:
Fg = mg
where m is the mass of the chain and g is the acceleration due to gravity. The normal force from the plane is upward and is equal to the force of gravity, since the chain is stationary at this moment.
Newton's second law states that the acceleration of an object is equal to the net force acting on it divided by its mass. Therefore, the acceleration of the chain is given by:
a = (Fg - Fn)/m = (mg - mg)/m = 0 m/s^2
Since the acceleration of the chain is zero, the speed of the chain does not change as it drops.
Read more about speed
https://brainly.com/question/28224010
#SPJ1
CQ not found
PLEASE HELP ME ANSWER THE PHYSICS QUESTIONS ON MY PROFILE!!! i will give brainliest to the first to answer!!! this one and the other ones LAST QUESTION!!!!!!!!!!!!! GET A BRAINLIEST
How far does a plane fly in 18 s while its velocity is changing from 146 m/s to 78 m/s at a uniform rate of acceleration?
Write the equation for the velocity component in the x-direction?
Answer:
The equation for the velocity component in the x-direction is : vx(t) = v(0) Cosθ.
Explanation:
here v(0) is the initial velocity
an object is thrown into the air and follows the path shown in the diagram above. Neglecting air resistance, which vector best represents the acceleration of the object at point A?
Answer: 3 (c)
Explanation: The only force acting on the object is the force of gravity, mg, which acts straight downward. Even though the object has horizontal velocity, there is no horizontal force after the object is done being thrown.
Please help>>>>
Ibrahim is a 15-year-old boy. He has been suspended for fighting on school property. How would a psychologist who emphasizes the social learning perspective explain this behavior?
A) Ibrahim has been rewarded for previous aggressive behavior.
B) Ibrahim has observed others who model aggressive behavior.
C) Ibrahim is at a stage in development when increases in male hormones predispose him to engage in aggression.
D) Ibrahim has projected his aggressive impulses onto others and anticipates that they will behave aggressively toward him.
The psychologist who emphasizes the social learning perspective explain this behavior would say that Ibrahim has observed others who model aggressive behavior. Option B
What is meant by aggressive behavior?According to social psychology, aggression refers to any conduct or action intended to hurt a person, an animal, or cause physical injury to property. Here are a few instances of aggressive behavior: physical harm. screaming, cursing, and foul language.
Aggression is an overt or covert social engagement that is frequently harmful and intended to cause harm to another person.
Aggressive behavior is forceful, reactive, and impulsive behavior that frequently leads to breaching social norms or the law.
Read more on aggression here https://brainly.com/question/1167735
#SPJ1
can anyone please help me answer this question the assignment will close in 30 mins please help me quick
Answer: D. 34.03
Explanation:
To solve this problem, we can use the equation for the conservation of energy, which states that the change in internal energy of a closed system is equal to the heat added to the system. We can express this equation as follows:
What method do you use to purify water contaminated with salt and microorganisms
The water purification procedure, such as filtration, sedimentation, distillation, etc.
Which method of purification disinfect water from microorganisms?Analysis of the reduction in microbes that is enough to protect against the transmission of pathogens in water is debated below. Chlorination is the most widely used method for disinfecting water supplies in the United States.
The most efficient way to desalinize salt water is by using a method called distillation. This is where you boil the water and then assemble the condensation. The steam will provide fresh salt-less water for you to drink.
So we can conclude that Chlorination is the activity of adding chlorine to drinking water to kill parasites bacteria and viruses.
Learn more about water here: https://brainly.com/question/1313076
#SPJ1
A liquid having a mall depth but a large volume is forced by an applied pressure p
What do you understand by the term "Eigen function and Eigen value" in quantum mechanics. Give an example each.
In quantum mechanics, an eigenfunction is a function that satisfies a particular differential equation and is used to describe the behavior of a physical system. An eigenvalue is a scalar value that corresponds to an eigenfunction and represents the magnitude of a physical property of the system.
An example of an eigenfunction in quantum mechanics is the wavefunction, which is used to describe the probability distribution of a particle in a particular state. The wavefunction is an eigenfunction of the Schrödinger equation, which is a fundamental equation in quantum mechanics that describes the time evolution of a physical system.
An example of an eigenvalue in quantum mechanics is the energy of an atom in a particular state. The energy of an atom is an eigenvalue of the Hamiltonian operator, which is a mathematical operator that describes the energy of a physical system.
In general, eigenfunctions and eigenvalues play a central role in the analysis of quantum mechanical systems and are important tools for understanding the behavior of particles at the atomic and subatomic scales.
Learn more about quantum mechanics here: https://brainly.com/question/23780112
A submarine is in water of density 1.0x 10 kg/m³. The submarine changes its depth. This causes
the pressure on it to change by 0.10 MPa.
What is the change in depth of the submarine?
A 0.10m
C 100m
B 10m
D 1000 m
Answer:
1000m
Explanation:
Pressure = p x g x h
0.1 x 10^6 = 10 x 10 x h
(0.1 x 10^6) / 100
h = 1000m
I hope my answer helps you.
While operating around buildings, the remote PIC should be aware of the creation of wind gusts that
answer choices
— change rapidly in direction and speed causing turbulence.
— enhance stability and imagery.
— increase performance of the aircraft.
The remote PIC should be aware of the wind gust because of a) the rapid change in direction and speed which causes turbulence.
The wind gust is a sudden short-term increase in wind speed. According to US weather observation practice, a gust is reported when the maximum wind speed reaches at least 16 knots and the difference between the maximum wind speed and the light wind speed reaches at least 9 knots. Wind forces can disrupt a building's load path or pierce the building's skin. Doors and windows can burst in really high winds. In other cases, nearby debris can be caught in the wind and flung into the building's envelope.
Learn more about the wind gust in
https://brainly.com/question/459236
#SPJ4
The magnetic domains of an unmagnetised object are found___________A.) Parallel to each otherB.) Perpendicular to each otherC.) Pointing towards southD.) Pointing in different direction
All of the magnetic domains in an unmagnetized item, such as the original piece of metal in our experiment below, point in different directions.
When a metal gets magnetized, as when it is rubbed with a strong magnet, all like magnetic poles line up and point in the same direction. Atoms in ferromagnetic materials form formations known as domains. A domain is an internal region of a material in which groups of magnetic moments spontaneously align in the same direction. When the external field is withdrawn, the domain walls are pinned in their new orientation, and the aligned domains generate a magnetic field. This is what happens when a ferromagnetic material is "magnetized" and transformed into a permanent magnet.
Learn more about magnetic here-
https://brainly.com/question/3160109
#SPJ4
In this figure, why is the kinetic energy gained by the falling ball equal to the change of potential energy? (Assuming no loss of energy due to friction.)
Kinetic energy gained by the falling ball is equal to the change of potential energy is because mechanical energy remains conserved ,it only converts from one form to another form.
The mechanical energy stays rationed when just inner powers follow up on the body and no outside powers are in real life. It implies that motor and potential might continue to change all through the excursion. Be that as it may, their total is steady at each point.
The forces are moderate, i.e., they don't rely upon the way of the moving article and are just subject to the beginning and last position. For instance, the gravitational power is moderate in nature, though the opposition presented via air is non-moderate in nature as it relies upon the way.
From the diagram,we can see that object has potential energy =mgh because of height h.When it was dropped from height h potential energy starts decreasing and kinetic energy starts increasing because of velocity attained by the body.Since mechanical energy is conserved,therefore kinetic and potential energy is equal.
To know more about potential energy, visit here:
https://brainly.com/question/9349250
#SPJ4
a 1 kg blob of putty moving at 10 m/s runs into another 1 kg stationary blob, and they stick together. the momentum of the blobs after the collision is
The momentum of the blobs after the collision of a 1 kg blob of putty moving at 10 m/s with another 1 kg stationary blob will be 5 m/s.
The term "completely inelastic collision" is used to describe every time two masses cling together after colliding. Any inelastic collision will result in the internal energy of the objects being transformed into kinetic energy. Because of this, even though the system's energy is conserved (no outside forces are at action), its internal energy is changing in an unknowable and unpredictable fashion. This implies that the concept of energy conservation in inelastic collisions is absolutely meaningless to us. However, the conserved quantity that we can monitor is momentum.
Initial momentum is expressed as p = m1v1 + m2v2,
where, I denotes vector quantities.
v2 = 0 (because the second blob is at rest).
As a result, p=m1v1, |p|=m1|v1|=1*10= 10 kg*m/s,
The total amount of momentum is conserved in a closed system. The end momentum is 10 kg*m/s and is therefore also directed in the same direction as the beginning momentum.
The combined mass is now M=m1+m2= 1+1 = 2 kg due to the fact that two blobs are now clumped together. As a result, p = mv= 10 =2v; from this, v= 10/2 = 5 m/s, headed in the same direction as the first blob's starting velocity.
To learn more about momentum visit;
https://brainly.com/question/24030570
#SPJ4
In an experiment, a student measured the volume of a substance while the mass was changed. The student measured up to five kilograms. The graph of the data is plotted below.
A volume versus mass graph is shown with mass on the vertical axes from 1 to 10 kilograms and volume on the horizontal axis from 1 to 5 milliliters. A line from the origin through all points and beyond.
Which of the following is an error the student made in creating an accurate graph?
The axes and graph are based only on measured values.
The axes are labeled with the incorrect variables.
The plotted points do not show all data collected.
The title has the incorrect order for the variables.
Answer:
let the first point be a second be b third be c fourth be d and last point be e.
The point a and d are incorrect. because tye plotting of the is incorrect
Suppose that Energizer makes AA batteries that, when placed in an electronic device, have a lifetime that is normally distributed with a mean of 360 minutes and a standard deviation of 25 minutes. (a) What is the 90th percentile of AA battery life? ( 2pts ) (b) If 5 batteries are randomly selected, what is the probability that at least one of the five lasts less than 330 minutes? (3 pts)
The x is the number of hours. want to determine the probability (P) x >= 13 To convert it to a percentage, multiply it by 100, yielding 84.13%.
Probability is simply the likelihood of something occurring. When we are uncertain about the result of an event, we might discuss the probabilities of several outcomes—how likely they are. Statistics is the study of occurrences guided by probability. If x is N(14,1), it can be transformed to N(0,1) using z = (x - mean) / standard deviation and the probability can be calculated using a conventional normal probability table.
P(x > 13)
= P(z > (13 - 14)/1)
= P(z > -1)
= 1 minus P(z -1)
= 1 minus 0.1587
= 0.8413
To convert it to a percentage, multiply it by 100, yielding 84.13%.
Learn more about conventional here-
https://brainly.com/question/28222820
#SPJ4
Which of the following scenarios involves at least one chemical change happening? (2 points)
Group of answer choices
Before you go swimming, you need to fill up the pool because evaporation has decreased the volume.
During the summer time, you are hired to sand your neighbor's fence and paint it white.
In the fall, one of your chores is to cut up wood and stack it in the basement for your parents.
Your summer job for the year is to pick strawberries. At the end of the day you have to crush the ones turning rotten to make strawberry jam.
The scenario that involves at least one chemical change happening is your summer job for the year is to pick strawberries. At the end of the day, you have to crush the ones turning rotten to make strawberry jam. The correct option is D.
What is a chemical change?When bonds between molecules or atoms are created, disrupted, or both, chemical changes result. This implies that a substance with a particular set of properties—such as melting point, color, flavor, etc.—becomes a substance with a different set of characteristics.
Three essential chemical components are used in the production of jam: Acids, sugar, and pectin.
Therefore, the correct option is D, Your summer job for the year is to pick strawberries. At the end of the day, you have to crush the ones turning rotten to make strawberry jam.
To learn more about chemical change, refer to the link:
https://brainly.com/question/29923908
#SPJ1
13. Which statement BEST describes one of the differences between the Wechsler tests and the older Stanford-Binet tests?
Wechsler tests provides scores on seven different types of intelligence; Stanford-Binet tests did not.
Wechsler tests distinguishes between general and specific intelligence; Stanford-Binet tests did not.
O
Wechsler tests musical ability as well as general intelligence; Stanford-Binet tests did not.
Wechsler tests removed the concept of mental age that was part of the Stanford-Binet tests.
Answer:
B. Wechsler tests distinguishes between general and specific intelligence; Stanford-Binet tests did not.
Explanation:
One of the main differences between the Wechsler and Stanford-Binet tests is that the Wechsler tests distinguish between general and specific intelligence. This means that the Wechsler tests provide separate scores for different types of intelligence, such as verbal comprehension and perceptual reasoning, whereas the Stanford-Binet tests did not. Additionally, the Wechsler tests measure a wider range of abilities than the Stanford-Binet tests, including musical ability and memory. The Wechsler tests also do not use the concept of mental age, which was a key feature of the Stanford-Binet tests.
The current theory of the structure of the
Earth, called plate tectonics, tells us that the
continents are in constant motion.
Assume that the North American continent
can be represented by a slab of rock 5500 km
on a side and 34 km deep and that the rock
has an average mass density of 2830 kg/m3
.
The continent is moving at the rate of about
2.4 cm/year
According to the information given, the continent weighs 2.422 * 10²¹ kg.
Volume is the amount of space a thing occupies, whereas mass is the amount of stuff it contains.
What is the rock's mass?
The following formula is used to calculate the rock's mass:
Volume times Density = Mass
The rock has a density of 2830 kg/m³
Area of side * Depth of rock equals the volume of the rock.
The rock's volume is equal to 5.5 * 10⁶ m x 5.5 * 10⁶ m x 2.83 * 10⁴ m
The rock's volume is 8.56 * 10¹⁷ m³
Rock mass: 8.56 * 10¹⁷ m³ * 2830 kg/m³
The rock weighs 2.422 * 10²¹ kg
To know more about Density , visit:
https://brainly.com/question/3310996
#SPJ1
An ant starts at one edge of a long strip of
paper that is 30.8 cm wide. She travels at
0.6 cm/s at an angle of 40◦ with the long edge.
How long will it take her to get across?
Answer in units of s.
it take the ant 68.9 seconds to get across the other edge of a long strip.
How do we calculate for velocity?If the ant is moving at a constant speed, the velocity vector will have the same magnitude at any point, and can be decomposed in two vectors, along directions perpendicular each other.
So then, if we choose these directions coincident with the long edge of the paper, and the other perpendicular to it, the components of the velocity vector, along these axes, can be calculated as the projections of this vector along these axes.
We only are interested in the component of the velocity across the paper, that can be calculated as follows:
vₓ = v* sin θ, where v is the magnitude of the velocity, and θ the angle that forms v with the long edge.
We know that v= 0.6 cm/s, and θ = 40º, so we can find vₓ as follows:
vₓ = 0.6 cm/s x sin 40 º
Vx = 0.6 cm/s x 0.7451 = 0.447 cm/s
Applying the definition of average velocity, we can solve for t:
time = 30.8 cm/ 0.447
time = 68.9 seconds
Learn more about average velocity at: https://brainly.com/question/17444459
#SPJ1
How much work is done on a 6.4N box of books that you move horizontally across a 6.1 meter room?
Answer:
39.04 J
Explanation:
Definition of work
[tex]W=fd[/tex]
[tex]W=[/tex] Work
[tex]f=[/tex] force
[tex]d=[/tex] displacement
In this case,
[tex]f=6.4[/tex]
[tex]d=6.1[/tex]
[tex]W=6.4*6.1[/tex]
[tex]W=39.04[/tex]
16. The diagram shows a design for an electrically operated model railway signed. a) Explain, step by step, how it works. b) Explain how, by adding a scale and a spring, you could use it as an ammeter.
Answer:
Below
Explanation:
When the switch is closed the circuit is complete....the coil in the circuit will act as a solenoid magnet and draw the iron in thus raising the sign.
an ideal vapor-compression refrigeration cycle operates at steady state with refrigerant 134a as the working fluid. saturated vapor enters the compressor at 2 bar, and saturated liquid exits the condenser at 8 bar. the mass flow rate of refrigerant is 7 kg/min. determine
the refrigeration capability, in tons, is 4.905 tons, the coefficient of performance, in kW, is 4.17 KW, and the compressor power, in kW, is 4.1336 KW.
Describe the compressor formula.Electrical Expense = HP *.746 * hours * Kw cost * motor efficiency. As an illustration, consider a 50 HP compressor that consumes $.06 per Kwh of electricity and has a 90% efficiency electric motor. $5,172.26 is the yearly cost for 50 HP multiplied by.746 over 2,080 hours.
Compressor definition and operationIn order to create energy which can be kept in a tank for later use, air compressors work by applying pressure to atmospheric air. Similar to an open balloon, when the compressed air is purposefully released, pressure builds up, transforming the potential energy into productive kinetic energy.
To know more about compressor visit;
https://brainly.com/question/28963656
#SPJ4
The resistors in the circuit below have the following values: R1 = 7.20 Ω, R2 = 7.00 Ω, and R3 = 4.10 Ω. The two batteries each have a voltage of 4.00 V.
The total voltage in the circuit is 8 V. Then, the current passing through the resistor R3 is 1.95 A. The power supply to this resistor by the batteries is 15.6 W.
What is Ohm's' law?According to Ohm's law, the voltage through a closed circuit is the product of the current passing through the circuit and resistance through it.
Hence, V = I R.
Given that the resistance through the resistor R3 = 4.10 Ω
The voltage across each batteries = 4 V
Total voltages = 4 + 4 = 8V
Current = voltage/ resistance
= 8 V/ 4.10 Ω
= 1.95 A.
Power through a circuit is the product of current and voltage through it.
P = I V
Power supplied to R3 = 1.95 A × 8 V = 15.6 W.
Therefore, the power supplied by the batteries to the resistor R3 is 15.6 W.
To find more on Ohm's law, refer here:
https://brainly.com/question/1247379
#SPJ1
A block with mass M slides down an incline of angle θ at constant velocity v.
Which of the following expressions is equal to the magnitude of frictional force between the block and the incline? (Note: The acceleration of gravity g = 10 m/s2.)
A.M∙g∙sin θ
B.M∙g∙cos θ
C.M∙g / sin θ
D.M∙g / cos θ
Mgsin, As a result, at a state of dynamic equilibrium, the frictional force exerted on a mass sliding down an incline is proportional to the object's weight times the sine of the incline angle.
What are velocity and speed?In contrast to velocity, which describes the speed and direction of such an object's movement, speed is the speed of moves along a path. Alternatively, velocity is a vector while speed is a scalar quantity.
Is speed also known as velocity?A motion or activity has velocity when it moves quickly. Another term for speed is celerity, which is also a synonym. The measurement of an object's rate and direction of positional change is known as its velocity in physics.
To know more about Velocity visit:
https://brainly.com/question/18084516
#SPJ4