A 100 L ball is blown up inside at 200K. It is then taken outside in the hot sun, and the volume increases to 150 L. What is the new temperature?​

Answers

Answer 1

Answer:

Temperature, T2 = 300 Kelvin

Explanation:

Given the following data;

Initial volume = 100 Liters

Initial temperature = 200 Kelvin

Final volume = 150 Liters

To find the final temperature T2, we would use Charles' law.

Charles states that when the pressure of an ideal gas is kept constant, the volume of the gas is directly proportional to the absolute temperature of the gas.

Mathematically, Charles is given by;

[tex] \frac {V}{T} = K[/tex]

[tex] \frac{V1}{T1} = \frac{V2}{T2}[/tex]

Making T2 as the subject formula, we have;

[tex] T_{2}= \frac{V_{2}}{V_{1}} * T_{1}[/tex]

Substituting into the formula, we have;

[tex] T_{2}= \frac{150}{100} * 200[/tex]

[tex] T_{2}= 1.5 * 200 [/tex]

Temperature, T2 = 300 Kelvin


Related Questions

What is the relation between λ and μ?

Answers

Physically speaking, the ability of electrical fields to traverse a standard vacuum is represented by the permittivity of free space.

What connection exists between λ and Î14? Physically speaking, the ability of electrical fields to traverse a standard vacuum is represented by the permittivity of free space.Approximately 8.854 × 10-12 F/m (farad per meter) is the constant, while the relative standard error is 1.5 x 10-10. No such mass or material item exists in a vacuum.The permittivity should therefore be close to 0. (and in fact 0 itself). Free space, on the other hand, has a permittivity of 8.85 x 10-12 F m-1, which means that there are no electromagnetic waves, particles, or charges present.

Vaccum permittivity:

Fc​=4πε0​1​×r2q1​q2​​

Where ε0​ is permttivity of vaccum.

Dimension will be [M−1L−3T4I2]

vaccum permeability:

μ0​=4π×10−7N/A2

Dimensions will be [MLT−2I−2]

Dimensions for μ0​ε0​1​ will be [M−1L−3T4I2]×[M1L1T−2I−2]1​=[L2T−2]

To learn more about Vaccum permittivity refer

https://brainly.com/question/11574961

#SPJ4

A car makes a trip due north for three-fourths of the time and due south one-fourth of the time. The average northward velocity has a magnitude of 32 m/s, and the average southward velocity has a magnitude of 29 m/s. What is the average velocity (magnitude and direction) for the entire trip?

Answers

Answer:

16.75 m/s North

Explanation:

Calculate a weighted average;  North is the positive direction

(32 m/s).75 - (29 m/s).25 = 16.75 m/s N

What are the 7 decreasing frequency?

Answers

Microwaves, Infrared, X-rays, and gamma rays are electromagnetic waves in decreasing frequency order that is from highest to lowest.

The relationship between frequency and wavelength is inversely proportional. That means if wavelength increases then frequency decreases.

The wavelengths of electromagnetic radiation, such as microwaves, typically range from one meter to one millimeter.

Longer wavelengths than visible light are found in infrared electromagnetic energy, also referred to as infrared light.

An X-ray is a sort of penetrating, high-energy electromagnetic radiation. X-radiations are far less common.

Gamma rays, commonly known as gamma radiation, are short, sharp electromagnetic radiation waves created by the radioactive disintegration of atomic nuclei.

For more information on electromagnetic waves kindly visit to

https://brainly.com/question/3101711

#SPJ4

What is the main reason that the gravitational attraction between Earth and the Moon changes each day?
(1) Earth's axis is tilted at 23.5°.
(2) Earth's rotational speed varies with the seasons.
(3) The Moon has an elliptical orbit.
(4) The Moon has a spherical shape

Answers

The Moon has an elliptical orbit is the main reason that the gravitational attraction between Earth and the Moon changes each day.

The Effect of Earth's Gravity and Moon's Gravity

Earth's gravity pulls the moon to the center of the earth, while the moon's gravitational force maintains the moon's position, resulting in a centrifugal force that makes the moon rotate on its axis and surround the earth so that it is not attracted to the earth's center of gravity or stays in its orbit.

The influence of the gravitational force of the earth and the moon is the tides of the sea. The moon's gravitational force pulls seawater toward the moon, affecting wave height and sea level. Because the moon revolves around the earth, there will be times when one side of the earth is closer to the moon. The part that is close to the moon will experience high tide, while the other part that is not close to the moon will experience low tide. The tides are also related to the phases of the moon. Usually, sea water will experience high tides during the full moon.

Learn more about gravitational attraction at https://brainly.com/question/21274057.

#SPJ4

Which force comes into play when an object starts to move on a surface?

Answers

The resistance provided to moving objects by the surface they are sliding or moving on is measured as sliding friction or dynamic friction. Sliding friction starts to work as soon as even the object begins to move.

What do static and dynamic friction mean?

When two bodies are in touch with one another and at rest, they experience static friction. Friction is what keeps anything from flowing while it is motionless. Dynamic friction, also known as kinetic friction, is friction that prevents a body from moving while it is already moving.

What kinds of dynamic friction are there?

There are two forms of dynamic friction: Sliding Resistance Friction as it rolls.

To know more about dynamic friction visit:

https://brainly.com/question/13000653

#SPJ4

What are 3 ways genetic diseases are caused?

Answers

A single gene mutation, several gene mutations, a combination of gene mutations and environmental variables, or damage to chromosomes (changes in the number or structure of complete chromosomes) can all result in genetic illnesses.

What three effects can a genetic mutation have on an organism?

Mutations may have an impact on an organism by altering its phenotype, or they may have an impact on the way DNA codes the genetic information (genotype). When mutations take place, they may be completely fatal or they may result in the termination (death) of an organism.

What exactly are genetic illnesses?

Genetic illnesses result from changes or anomalies in an organism's genome. A gene mutation can affect one or more genes, leading to a genetic illness.

To know more about Genetics diseases visit:-

https://brainly.com/question/8061328

#SPJ4

What formula would you use to calculate the frequency of a wave?

Answers

The formula for calculating the frequency of a wave is f = 1/T, where f is the frequency in hertz (Hz) and T is the period of the wave in seconds.

What is Frequency?

Frequency is a measure of the number of occurrences of a repeating event per unit time. It is also referred to as temporal frequency, which emphasizes the contrast to spatial frequency and angular frequency. Frequency is usually measured in hertz (Hz),

audio signals (sound), radio waves, and light.
Frequency is the number of complete waves that pass a given point in a unit of time, typically expressed in hertz (Hz). A hertz is equal to one cycle per second.
To know more about frequency click-
https://brainly.com/question/254161
#SPJ4

A space probe is launched vertically into space. It launches from rest and accelerates at a rate of 29 m/s^2. How many seconds before the probe reaches the speed required to get into orbit 7,850 m/s^2

Answers

Answer: 270

Explanation:

To determine how many seconds it would take for a probe to reach that speed starting from rest and accelerating at a rate of 29 m/s^2, you can use the equation for average acceleration:

Average acceleration = (final velocity - initial velocity) / time

Rearranging the terms, we can solve for time:

Time = (final velocity - initial velocity) / average acceleration

In this case, the initial velocity is 0 m/s (since the probe is launching from rest), the final velocity is 7,850 m/s (the speed required to reach orbit), and the average acceleration is 29 m/s^2. Plugging these values into the equation, we get:

Time = (7850 m/s - 0 m/s) / 29 m/s^2 = 270.34 seconds

Therefore, it would take the probe approximately 270 seconds to reach the speed required to get into orbit if it is accelerating at a rate of 29 m/s^2.

The reactivity phenomenon of self-monitoring procedures has been shown to increase desired behaviors, decrease undesired behaviors. O both increase desired behaviors and decrease undesired behaviors. O neither increase desired behaviors nor decrease undesired behaviors.

Answers

In addition to several other factors thought to affect self-monitoring reactivity, such as the valence of target behaviours, motivation to change the target behaviour, the type of target behaviour, and self-monitoring accuracy,

the current study looked at a new variable, the number of behaviours self-monitored or multiple tracking. Self-monitoring is the process through which people keep track of when their own target actions occur. Self-monitoring is employed as a therapeutic technique in addition to serving as a data source since it frequently results in reactive behaviour modifications in response frequency. Face touching, nonfluencies, and value judgements were the three target behaviours that were mixed in all feasible ways (seven combinations), and one combination was given to each group to watch throughout the self-monitoring phase. Results showed that logging several behaviours

To learn more about behaviours please click on below link

https://brainly.com/question/27683109

#SPJ4

The planets in our solar system orbit the sun. Consider the gravitational force between the sun and the planets. Based on mass alone, the gravitational force would be the greatest between the sun and.

Answers

Gravity The principal factor governing the planets' orbits around the sun is gravity. While each planet has its own gravity that is determined by its size and speed of motion, orbit is determined by the gravity of the sun.

If you were to stand on the surface of any planet in the solar system, or, in the case of the ice giants, float in its atmosphere, you would feel the following gravitational pull: Venus: 0.9 g Mercury: 0.38 g Moon: 0.17 g Mars: 0.38 g Saturn: 1.07 g Jupiter: 2.53 g 0.89 g Uranus Jupiter: 1.14 g The Planets' Gravitational Pull The two driving forces that propel the planets around the sun.

To learn more about planet please click on below link

https://brainly.com/question/14581221

#SPJ4

consider an experiment where light of a single wavelength (monochromatic) is incident on a thin slit, creating a diffraction pattern. what change to the experiment will increase the size of the diffraction effect?

Answers

Dispersion of the diffracted image into the several colours that make up white lightJustification for the ideal selection

:The diffracted picture of the slit will become scattered into the individual hues of white light

when a monochromatic source is replaced by white light.

All other fringes will be the constituent colours, with white serving as the central maxima.

When light with a shorter wavelength is employed,

the width of the central brilliant fringe in the diffraction pattern shrinks

.(2) When the slit is made narrower, the width grows.

For more information about Wavelength

https://brainly.com/question/12924624

#SPJ4

What does 2+ on an atom mean?

Answers

2+ on an atom means that the atom needs 2 electrons to complete its octet.

As we know,

There are two types of elements present one is a Cation and the other is Anion.

Usually, when any of the elements are short 2 or more electrons, then in that case we place a plus sign in the superscript of the elements for denoting the deficiency of the electrons.

If any atom of an alkali metal group which are also called as group 1 atoms loses one electrons then such metals easily form a cation with one positive charge on it, in a same way the atoms of group 2 losses 2 electrons and forms a cations.

For such more questions on Cation and Anion

https://brainly.com/question/4838994

#SPJ4

a proton follows the path shown in (figure 1). its initial speed is v0 = 2.6×106 m/s.

Answers

The speed of the proton at point P is determined as 2.67 x 10⁶ m/s.

The speed of the proton at point P is determined by applying the principle of conservation of energy as shown below.

Total energy of the proton at the initial position = total energy of the proton at the final position

Ui + K.Ei = Uf + K.Ef

where;

U is potential energy

K.E is the kinetic energy

= kq₁q₂/r₁  +  ¹/₂mv₁² = kq₁q₂/r₂  +  ¹/₂mv₂²

= kq₁q₂/r₁  +  ¹/₂mv₁² - kq₁q₂/r₂ = ¹/₂mv₂²

= kq₁q₂(1/r₁  - 1/r₂)  + ¹/₂mv₁² = ¹/₂mv₂²

= ¹/₂mv₂²  = kq₁q₂ (1/r₁  - 1/r₂)  + ¹/₂mv₁²

= v₂² = 2/m [kq₁q₂ (1/r₁  - 1/r₂)  + ¹/₂mv₁² ]

where;

m is mass of the proton

k is coulomb's constant

q₁ is the magnitude of the charge

q₂ is charge of proton

r₁ is the initial position of the proton

r₂ is the final position of the proton = 5 mm (from Pythagoras theorem)

= v₂² = 2/(1.67 x 10⁻²⁷) [9 x 10⁹ x 10 x 10⁻⁹ x 1.6 x 10⁻¹⁹ (1/0.003  - 1/0.005)  + ¹/₂(1.67 x 10⁻²⁷)(2.2 x 10⁶)² ]

= v₂² = 7.14 x 10¹²

= v₂ = √ (1.44 x 10²³)

= v₂ = 2.67 x 10⁶ m/s

To Know more about Speed of Proton:

https://brainly.com/question/29619950

#SPJ4

The complete question is below:

a proton follows the path shown in (figure 1). its initial speed is v0 = 2.2×106 m/s. find the speed of the proton at point P?

Two forces, 300 N and 500 N, act on an 80-kg particle. 300 N north and 500 N east. Find the magnitude of the resultant acceleration if the forces make a 90 angle with each other.

Answers

Answer:

7.28 m/s^2.

Explanation:

To find the magnitude of the resultant acceleration of the particle, we can use the equation for Newton's second law of motion:

F = ma

Where F is the resultant force, m is the mass of the particle, and a is the resultant acceleration.

Since the forces are acting at a 90 degree angle to each other, we can treat them as two separate forces and use the Pythagorean theorem to find the magnitude of the resultant force:

F = sqrt((300 N)^2 + (500 N)^2)

= sqrt(90000 N^2 + 250000 N^2)

= sqrt(340000 N^2)

= sqrt(340000) N

= 582.67 N

We can now use this value for the resultant force to find the resultant acceleration:

a = F/m

= 582.67 N / 80 kg

= 7.28 m/s^2

Therefore, the magnitude of the resultant acceleration is 7.28 m/s^2.

A parallel circuit is one in which there is more than one point where the ____ divides and follows different paths.

Answers

Answer:

current

Explanation:

A parallel circuit is one in which there is more than one point where the current divides and follows different paths.

find the volume of the given solid. bounded by the coordinate planes and the plane 8x + 5y + z = 40

Answers

Refer to the photo taken.

1.The discontinuity effect is caused primarily by _________.Group of answer choicesnormative social influence and informational social influencefear and greedcoordination loss and reduced effortreduced evaluation apprehension and attitude polarizationdeindividuation and reduced evaluation apprehension2.Research has found that if you put people into two different groups, even if the basis is completely arbitrary (such as a coin flip), people will give preference (such as more money) to their own group over the other group. This is called ________ and it is one component of ________.Group of answer choicesthe illusory correlation; realistic group conflict theory.the minimal group paradigm; social identity theory.outgroup polarization; realistic group conflict theory.the illusory correlation; social identity theory.outgroup polarization; ethnocentrism3.

Answers

Fear and greed have a major role in the discontinuity effect. Realistic group conflict theory includes a concept known as outgroup polarization. Realistic group conflict theory is one of the options from the set of replies.

A characteristic of transverse waves called polarization (sometimes called polarisation) identifies the geometrical orientation of the oscillations is called polarization. The oscillation in a transverse wave occurs in a direction that is opposite to the wave's velocity. Vibrations occurring along a taut string, such as the string of a guitar, provide a straightforward illustration of a polarised transverse wave. Vibrations may be at a vertical, horizontal, or any other angle perpendicular to the string, depending on how the string is plucked. In contrast, polarization does not exist in longitudinal waves, such as sound waves in a liquid or gas, because the displacement of the oscillating particles always occurs in the direction of the wave's propagation.

Learn more about polarization here:

https://brainly.com/question/29217577

#SPJ4

A 2kg ball is held at a height with 250J of gravitational potential energy. The ball is dropped. Calculate the velocity of the ball just before it hits the floor.

Answers

The ball's potential energy is completely changed into its kinetic energy (E k), which is equal to 250 J, when it hits the ground.

If v is the speed the ball was traveling at when it hit the ground, then

E(k) = 1 /2 mv^2

V= √2Ek/m

V= √2*250/ 2

V= 15.81 m/s

potential energy, which is a form of stored energy that depends on the relative positions of different components in a system. When a spring is compressed or stretched, its potential energy increases. If a steel ball is raised above the ground as opposed to falling to the ground, it has more potential energy.

For more information on potential energy kindly visit to

https://brainly.com/question/11749818

#SPJ1

How to calculate wave velocity for a given periodic wave with a wavelength of 3m has a frequency 6Hz?

Answers

The product of wavelength and frequency is always the speed of the wave.For this particular wave is 18 meters per second .

How can you calculate a wave's velocity given its frequency and wavelength? The wavelength ( = 0.9 m) and frequency ( = 0.9 m) values are supplied because one definition of wavelength is the distance a wave has gone after one full cycle, or one period.Since the wave velocity can be determined using v w = f, we can do so.Speed = Wavelength x Frequency describes how wave speed relates to both wave wavelength and wave frequency.By dividing the distance between the two fixed points by the interval between the detection of the wave edge at each location, one may determine the velocity using the leading edge data. The product of wavelength and frequency is always thespeed of the wave.For this particular wave, 

Speed = (3 meters) x (6 per second)  =  18 meters per second .

To learn more about wavelength refer

https://brainly.com/question/713613

#SPJ4

Heroin addicts can now be given pharmaceutical treatment to help curb their desire and addiction. Which mechanism would help an addict decrease their addiction?

Heroin addicts can now be given pharmaceutical treatment to help curb their desire and addiction. Which mechanism would help an addict decrease their addiction?

A drug that acts as an opioid agonist.
A drug that increases GABA.
A drug that increases serotonin and dopamine levels in the synapse.
A drug that increases norepinephrine levels in the synapse.

Answers

A drug that acts as an opioid agonist mechanism would help an addict decrease their addiction.

What is opioid agonist therapy?

Opioid agonist treatment is a safe and effective medication-based treatment for people who are dependent on opioid drugs such as heroin, oxycodone, hydromorphone (Dilaudid), fentanyl and Percocet.

The treatment helps clients and patients who live with opioid addiction improve their day-to-day functioning, find stability, manage withdrawal symptoms, and work toward recovery. It can lower the risk of drug-related harms, including hepatitis C and HIV transmission as well as fatal overdose. It can also help people stay in treatment and engage in their care.

Taking opioid agonist drugs like methadone, buprenorphine/naloxone (Suboxone), or slow-release oral morphine is a necessary part of opioid agonist treatment (Kadian).

To learn more about opioid therapy, refer the link:

https://brainly.com/question/29800692

#SPJ4

An opioid agonist medication would aid an addict in lessening their dependence.

What is Opoid therapy?

For those who are dependent on opioid narcotics including heroin, oxycodone, hydromorphone (Dilaudid), fentanyl, and Percocet, opioid agonist treatment provides a secure and productive medication-based treatment option.

Clients and patients receiving treatment for opioid addiction are able to operate better on a daily basis, find stability, control withdrawal symptoms, and make progress toward recovery. It can reduce the chance of drug-related problems, such as the spread of HIV and hepatitis C as well as fatal overdoses. It may also encourage patients to participate in their care and stay in therapy.

Opioid agonist therapy requires the use of opioid agonist medications like methadone, buprenorphine/naloxone (Suboxone), or slow-release oral morphine (Kadian).

Therefore, An opioid agonist medication would aid an addict in lessening their dependence.

To learn more about Opoid, refer to the link:

https://brainly.com/question/26332595

#SPJ4

please help me get this PLEASE

Answers

The shuttlecock began 7 m above the ground and then fell through the vacuum. Therefore, option (A) is correct.

What is the velocity vs time graph?

A velocity vs time graph can be described as a type of graph that compares the change in the velocity over a period of time. This graph can be used to describe both the velocity, the direction it is moving, its acceleration, and the displacement.

The slope in a velocity vs time graph is equal to the acceleration of the object and the area under a velocity-time graph is equal to displacement.

In the given height vs time graph, the height of the shuttlecock is 7 meters at time t = 0. If the shuttlecock fell through the thick air, then its acceleration will decrease due to air resistance.

But the blue line is showing constant acceleration as there is no air resistance so the shuttlecock fell through the vacuum.

Learn more about velocity-time graph, here:

https://brainly.com/question/28357012

#SPJ1

a free body diagram with 4 force vectors. the first vector is pointing downward labeled f subscript g baseline, the second is pointing right labeled f subscript p baseline. the third is pointing upward labeled f subscript n baseline. the fourth is pointing left labeled f subscript f. the upward vector is equal in length to the downward vector. the right vector is longer than the left. which statements describe the book and the forces acting on it? check all that apply. the forces are balanced. the forces are unbalanced. the net force is zero. the book is at rest. the net force is to the right. the book is moving to the right.

Answers

The book moves towards the right. So the correct answer is Option D.

According to the free body diagram, the upward and downward forces are equal in magnitude as they have the same length of the vector but are directed in opposite direction.So these two components of force nullify each other. The force vectors towards the right side and left side are opposite in direction but are not equal in magnitude. Since the length of the force vector towards the right side is longer in length than that towards the left side, hence they do not nullify each other. The forces are unbalanced and the net force is directed towards the right side. So the book moves towards the right side.

For further details about Unbalanced force, follow the link: https://brainly.com/question/30027554

#SPJ4

The international space station orbits the earth at about 27,578 kilometers every hour. What is this an example of

Answers

The international space station orbits the earth at about 27,578 kilometers every hour this an example of Speed.

What is Speed?

Speed  can be described as the rate of change of position of an object in any direction however the Speed  can be described as the  measured as the ratio of distance to the time in which the distance was covered.

It should be noted that Speed is a scalar quantity as it has only direction and no magnitude which makes it to be different from velocity.

Therefore, option A is correct.

Learn more about Speed at:

https://brainly.com/question/4931057

#SPJ1

missing options:

Speed. Velocity. Acceleration.

2. A car is travelling at 50 km/h. The driver sees a child run out into the road 5m ahead. She applies the break and the car stops in 5 seconds. The driver's thinking time is 1.5 s. A. Will the car stop in time?
B. If the driver's thinking time is increased to 2.5 s, will the car stop in time? C. What happens if the thinking time is 1.5 s but the car is travelling at 64km/h?​

Answers

Anwser:

A: No

B: No

C: No

Explanation:

V = 50km/h = 14m/s

V2 = 0m/s

t = 5s

a = V2 - V/t = -2,8m/s²

The distance the car will drive when hitting the brakes:

t = 5s

a = -2,8m/s²

v = 14m/s

d = v•t + ½a•t² = 14•5 + -1,4•25 = 35m

and 35m is greater than 5m, and this is even with not counting the thinking time(1,5s), in which the car would have traveled an extra 21m. So 56m in total.

mass = 28g
volume=?
density= 13 g/ml

Answers

Answer:

2.15ml

Explanation:

The formula for density is    D = m/v

Since we already have density and mass, we need to rearrange the equation to find the volume.

The rearranged formula is     V = m/D

V = 28g/13g/ml

The volume is 2.15ml

When your powered vessel is underway Can your passengers sit with their legs hanging over the side?

Answers

No, when powered vessel is underway, the passengers can not sit with their legs hanging over the side.

Power boats are also known as motor or speed boats. As evident by their name, they are powered by the engine. The position of engine however varies in boats. It can be fit inside, outside or it can be hybrid. The latter case involved presence of parts of engine both inside and outside.

The postion of motor decides the seating position. While riding the boat, it is mandatory to follow certain rules and regulations as they benefit the passengers and not the boat company or boat renter. Safety first should always be the rule regardless of the passenger being tourist or local resident.

Learn more about power boat -

https://brainly.com/question/10729578

#SPJ4

an accident victim with a broken leg is being placed in traction. the patient wears a special boot with a pulley attached to the sole. the foot and boot together have a mass of 4.0 kg, and the doctor has decided to hang a m = 7.0kg mass from the rope. the boot is held suspended by the ropes and does not touch the bed. (figure 1)no title providedA) Determine the amount of tension in the rope by using Newton?s laws to analyze the hanging mass. Assume that ? = 11? ^ circ . Hint: If the pulleys are frictionless, which we will assume, the tension in the rope is constant from one end to the other.B) The net traction force needs to pull straight out on the leg. What is the proper angle ? for the upper rope?C) What is the net traction force pulling on the leg?

Answers

The amount of tension in the rope by using Newton's laws if The mass suspended on ropes is 7 kg, is 68.6 Newtons.

What is mass?

A fundamental characteristic of an object, its inertia is quantified by its mass, which is a basic indicator of the volume of substance inside the thing. Because mass is such a fundamental quantity and is difficult to define in terms of another, definitions of it frequently appear circular.

It is possible to define every mechanical quantity in terms of mass, length, and time. The SI unit for mass, denoted by the letter m, is the kilogram.

Given:

The mass of the foot and boot, M = 4 kg,

The mass suspended by ropes, m = 7 kg,

Calculate the tension on the rope as shown below,

Tension on the ropes = m × a

Tension on the ropes = 7 × 9.8

Tension on the ropes = 68.6 N

Thus, the tension on the boot and foot is 68.6 N.

To know more about mass:

https://brainly.com/question/13040516

#SPJ4

To determine the acceleration due to gravity, g using simple pendulum at

different places.

( IT IS MY SCHOOL PROJECT ITS SHOULD ME OF MINIMUM 20 PAGES )

Answers

By measuring the length of the pendulum and the period of oscillation at different locations, you can compare the value of g at those locations and see how it varies.

What is a pendulum?

Generally, To determine the acceleration due to gravity using a simple pendulum, you will need to measure the length of the pendulum and the period of oscillation of the pendulum. The period of oscillation is the time it takes for the pendulum to complete one full swing.

To measure the period of oscillation, you can use a stopwatch or a timer to measure the time it takes for the pendulum to swing back and forth a certain number of times (such as 10 swings). The longer the pendulum, the longer the period of oscillation will be.

Once you have measured the length of the pendulum and the period of oscillation, you can use the following equation to calculate the acceleration due to gravity:

g = (4π^2L)/(T^2)

where:

g is the acceleration due to gravity π is the constant pi (3.14) L is the length of the pendulum in meters T is the period of oscillation in seconds

Read more about pendulum

https://brainly.com/question/14759840

#SPJ1

What happens when light passes through slits?

Answers

Light is diffracted into semicircular waves when it travels through small apertures, Waves that line up crest to crest or trough to trough experience pure constructive interference.

What did you notice about the light's movement through the slits?

On a faraway screen, one can see the light traveling through the two openings. The laws of geometrical optics apply, and the light forms two shadows when the widths of the slits are much bigger than the wavelength of the light.

What happens when there are two slits in a wave?

The wave effectively splits into two new waves that each expand out from one of the holes as it passes through both of them. Then, these two waves start to interfere with one another. Where a peak and a trough meet occasionally.

To know more about light passes through slits visit :-

https://brainly.com/question/16046466

#SPJ4

A student plots the current voltage graphs of three samples of nichrome wire. The samples have resistances R1, R2 and R3

Answers

The conclusions that are correct about the resistance  include 1 and 3.

option C is the correct answer.

What is ohms law?

Ohms law states that the current flowing in ohmic conductor is directly proportional to the current across the conductor.

Mathematically, the formula for ohms law is given as;

V = IR

where;

I is the current in the conductorR is the resistance of the resistor

The power dissipated in a circuit is proportional to the square across the circuit.

P = IV

P = I²R

P = V²/R

where;

P is the power dissipated in the circuit

From the formula given above, the power dissipated in the circuit is directly proportional to the square of voltage and inversely proportional to the resistance of the circuit.

The smaller the resistance, the more power is dissipated in the circuit.

In the given graph, R3 is the least resistance and it will have the most dissipated in the circuit.

Learn more about ohmic conductors here: https://brainly.com/question/13710714

#SPJ1

Other Questions
Each base in this oblique prism is a right triangle.What is the volume of the figure? HELPP asap Ill mark you as brainlister PLEASE HELP!!! Given PQ. Find the measure of arc PQ, if the radius is 30 and chord PQ = 36. Round to nearest degree. NEED HELP PLEASE ASAP.QuestionWhat was the reaction of many Arabs and Palestinians to the creation of Israel?A.They opposed it because Palestinians and Arabs had already been living in parts of what became Israel.B.They welcomed it because of the promise of a strong economy.C.They asked to move there because of its rich soil.D.They had no interest in the subject of Israel. Bill is a painter, who has been hired to paint a house. He receives an houry rate of $35 an hour. The materials Bill had to purchase cost $50 for the job. The amount of money Bill makes in profit, after working "x" hours, is modeled by the function:f(x) = 352 50Determine Bill's profit after working 10 hours. THIS IS DUE NOW wiil give crown if right Winston bought an encyclopedia priced at $42. Shipping and handling cost anadditional 30% of the price. What was the total cost of the encyclopedia, in cluding shipping and handling? How can the writer add parallelism in this passage?by changing the phrase young people to most people in sentence 1by deleting the words obvious and potentially from sentence 3by deleting save lives and adding the phrase easy to administer to the end of sentence 4by shortening the passage to only five sentences by removing sentence 5 ALGEBRA identify the terms, coefficients, and constants in the expression.5m+9 why is having insurance important ? Joss father works for the telephone company, and throughout the story, Gary Soto refers to telephone poles. What is the significance of the telephone pole as the author uses it in the story? How does it relate to the theme? Cite textual evidence to support your answer. (Story: Born Worker) Need help thanksIts Trigonometry and its hard. help help please it due rn? Solve if you want cookie! Question 4 of 40A factory would be considered what type of economic resource?A. LaborB. EntrepreneurshipC. CapitalD. LandSUBMIT Whats the answer its due in 15 mins PLEASE HELP ME ILL GIVE 70 POINTS AND MARK BRAINLIEST Read this excerpt from the police report in "It's My Constitutional Right!"The police report for Claudette Colvin dated March 2, 1955. Why is this an example of a primary source?A It was written by a man named Robert Clare in Montgomery.m B It was written about the Montgomery City Lines Bus company.C It was written the same day Claudette was taken off the bus.D It was written using official police words and phrases. Find the degree of the polynomial 50 Points Find the value of r in the figure.Assume that lines a and bare parallel.(4r - 30)(2x)b Imagine a population of moths. White moths are easier for birds to see and eat. Black moths blend into their surroundings, so they are less visible to birds than white moths. As a result, black moths are more likely to survive and reproduce, enabling the gene for black coloration to be passed on to the next generation. This increases the frequency of genes for black coloration in the population. Which evolutionary process does this scenario describe