:
Please give me brainly,
The thermal energy of an object depends on three things: 4 the number of molecules in the object 4 the temperature of the object (average molecular motion) 4 the arrangement of the object's molecules (states of matter). The more molecules an object has at a given temperature, the more thermal energy it has.
Mass and Temperarture
I am pretty sure that is right if Not sorry
Have a great day.
What causes magnetic stripes to form?
Answer:
The striped magnetic pattern develops because, as oceanic crust pulls apart, magma rises to the surface at mid-ocean ridges and spills out to create new bands of ocean floor. Later, after the planet’s magnetic field flips again, the next stripe of new ocean floor aligns its polarity.
Explanation:
hope this helps!
A microwave has a frequency of
90 GHZ. What is the energy of
electromagnetic radiation from
the microwave?
The energy of the electromagnetic radiation from the microwave is equal to 5.96 × 10⁻²³ J.
What is photon energy?The energy carried by one photon of any electromagnetic radiation is known as photon energy. This energy is directly proportional to the frequency of electromagnetic radiations and inversely proportional to their wavelength.
To calculate the energy of the photon, we can use the following relation:
The mathematical formula of energy of photon: E = hc/λ
where E is energy, h = Planck's Constant is equal to 6.626 × 10⁻³⁴ Js and c = speed of light = 3 ×10⁸ms⁻¹, λ is wavelength of light
Given, the frequency of the electromagnetic radiation, ν = 90 GHz
ν = 90 ×10⁹ Hz
The energy of one photon microwave radiations is equal to E = hν
E = 6.626 × 10⁻³⁴Js × 90 ×10⁹ s⁻¹
E = 596.34 × 10⁻²⁵
E = 5.96 × 10⁻²³ J
Learn more about photon energy, here:
brainly.com/question/11016364
#SPJ1
1.24 × 107 kilograms. Write the mass in standard notation.
The product of 1.24 and 107 kilograms expressed in standard form is 1.3268 x 10² kg.
What is standard form?A standard form is a form of writing equations, numbers, or expressions using a certain set of rules.
Standard form is a method often used by scientists to express large number into a more condensed form, usually in power of ten.
The product of 1.24 and 107 kilograms expressed in standard form is calculated as;
1.24 x 107 kg = 132.68 kg
in standard form = 1.3268 x 10² kg
Thus, numbers expressed in standard forms makes it very easy to represent and recall the number.
Learn more about standard form here: https://brainly.com/question/19169731
#SPJ1
Why do people use sonar under water?
Due to the fact that sound waves travel further in water than radar and light waves do, sonar, which stands for Sound Navigation and Ranging, is useful for exploring and mapping the ocean.
How does underwater sonar operate?
By sending ultrasonic waves into the water and listening for the returned echoes, a sonar may find these items. The distribution, density, and movement of a school of fish can be seen on the Sonar display at an angle of 360° or 180° in all directions.
Can sonar identify undersea humans?
To "see" in the water, sonar uses sound waves. To find underwater shipwrecks, bodies of people, and other objects, as well as to determine the circumstances of their drowning, sonar is a very valuable tool.
To know more about sonar, visit:
brainly.com/question/20510435
#SPJ4
What are elements with 2 electrons called?
Elements with 2 electrons are called as Group 2 Elements.
As the name says elements with 2 electrons.
Such elements have 2 electrons in their outermost orbit, due to the presence of these 2 electrons in the outermost orbit such elements are not stable.
So, for becoming stable and completing the octet in the outermost orbit the elements need to lose their 2 electrons which are present in the outermost orbit.
Some common examples of such elements is Magnesium, Calcium, and Strontium.
The valency of such elements is 2.
As we know, valency is nothing but the number of electrons which are either lost or taken by the atom for completing their octet.
For more questions on Cations and Anions
https://brainly.com/question/29881978
#SPJ4
(6) Different colors of light correspond to different: (I) frequencies (II) intensities (III) wavelengths (A) I only (B) Il only (C) Ill only (D) I and IlI (E) all of the above
Answer:e all of the above
Explanation:
What is the ionic compound for MgBr2?
The ionic compound for [tex]MgBr_2[/tex] magnesium.
Magnesium bromide is the chemical compound known as [tex]MgBr_2[/tex].
We are aware that ionic compounds are made up of two ions, one of which is a positive-charged cation and the other a negative-charged anion. For instance, when we separate ionic compounds into their constituent ions, we obtain cations and anion.
(a), Breaking of [tex]$\mathrm{MgBr}_2$[/tex] into ions '
[tex]\left.\mathrm{MgBr}_2_(aq) \longrightarrow \mathrm{Mg}_{(\mathrm{aq})}^{2+}+2 \mathrm{Br}_{\left(a q_1\right)}{ }^2\right[/tex]
Cation formula [tex]$=Mg^{2+} (a q)$[/tex]
Anion Formula [tex]$=\mathrm{Br}^{\ominus}(a q)$[/tex]
(b) Breaking of [tex]$\mathrm{FeCl}_3$[/tex] into ions [tex]$\mathrm{L}$[/tex]
[tex]Fecl_{3(aq)}\rightarrow Fe^{3+}(aq)+3cl^-(aq)[/tex]
i.e Cation formula [tex]$=$ fe^ {+3}[/tex]
Anion formula [tex]$=cl^{\theta}(a q)$[/tex]
For more such question on ionic compound.
https://brainly.com/question/2687188
#SPJ4
IM BEGGING IVE LITERALLY LOST HOPE AND I REALLY NEED HELP PROPER ANSWE PLEASEEEE
Complete the values in the table, assuming that all projectiles are launched horizontally and fall
downwards with an acceleration of 9.8 ms 2. Give all your answers to 2 significant figures.
Find the time to reach target and distance fallen
Time to reach target / s---> B4.1, Distance fallen / m,----> B4.2,
What is the connection between time and acceleration?The magnitude of the velocity change increases with lengthier acceleration. When acceleration is constant, the change in velocity is directly proportional to time. If velocity grows by a particular amount during a specific period of time, it ought to do so by an equal amount over an equal period of time.
What is the distance-time formula for acceleration?The equation a = v/t denotes acceleration (a), which is the change in velocity (v) over the change in time (t). This enables you to calculate the change in velocity in meters per second squared (m/s2).
to know more about acceleration here:
brainly.com/question/2303856
#SPJ1
When an object is moved from rest at a point A to rest atpoint B in a gravitational field, the net work done by thefield depends on the mass of the object and
1. the velocity of the object as it moves between A andB
2. the positions of A and B
3. both the positions of A and B and the pathtaken between them
4. the path taken between A and B only
5. the nature of the external force moving the object fromA to B
When an object is moved from rest at a point A to rest at point B in a gravitational field, the net work done by the field depends on the mass of the object (4) the path taken between A and B only.
The work done depends on the mass, acceleration due to gravitation and height. Hence, the distance between point A and point B affects the net work done by the objects.
Work done = mass X acceleration due to gravity X height
= W = mgh
where,
Mass of the object = m
Acceleration due to gravity = g
Height between the object = h
To know more about Work done:
https://brainly.com/question/14993089
#SPJ4
should the speed of the goose be increased or decreased to make the total momentum of the three birds add up to zero? verify your answer by calculating the required speed
The birds' collective momentum is in the same direction as a goose's, i.e., the right way, but the goose's momentum is more than that of two ducks.
In order to make the goose's overall momentum zero, we employ the idea of momentum to determine the lowered speed.Given that the speed of the goose is greater than the sum of the speeds of the two ducks, it is necessary to decrease the momentum of the goose in order to zero out the overall momentum.P total = Pd + Pd + Pg0=-2md vd + mg vg
2md vd/ mg = v g =2 (40) (1.1) /7.6kg
vg =1.2m/s
when total momentum is set to zero.
For more information on momentum kindly visit to
https://brainly.com/question/24030570
#SPJ1
a race car completes the final lap of a race on a 2-kilometer circular track. at the start of the lap, it crosses the line at 60 meters/second. it completes the lap 28.57 seconds later, crossing the line at 85 meters/second. calculate the displacement and average acceleration of the car along the track over the course of the final lap.
The average acceleration is (0.88 m/s2) given that (85 m/s - 60 m/s)/28.57 s.
A. The distance travelled is 0 metres, and the speed is 0.88 metres per second.
B. The distance travelled is 2,000 metres, and the speed is 1.14 metres per second.
C. The distance travelled is 0 metres, and the speed is 70.0 metres per second2.
D. The distance travelled is 2,000 metres, and the speed is 80.0 metres per second.
E. The distance travelled is 0 metres, and the speed is 0.70 metres per second2.
Displacement is a change in position over a predetermined period of time. The displacement is 0 since the initial and final positions are equal.
-
Average acceleration is the result of changing time and velocity. As a result, the average acceleration is (0.88 m/s2) given that (85 m/s - 60 m/s)/28.57 s.
Know more about acceleration at:
https://brainly.com/question/25749514
#SPJ4
How many companies have set Scope 3 targets?
From 936 firms in 2010 through 3,317 firms in 2021, more businesses reported Scope 3 pollutants in the available CDP dataset.
How many businesses have a science-based objective?A zero-carbon economy is being implemented around the world.The Research Based Goals initiative (SBTi) is working with more over 4,000 companies and financial institutions to cut their emissions in accordance with climate science.Learn more about their commitments and goals.
How are Scope 3 emissions targeted?Needed to make an informed transportation decisions, selecting which products or vendors to use, and pushing their suppliers to cut their own emissions are all ways that businesses can lower their Scope 3 emissions.
To know more about Scope 3 visit:
https://brainly.com/question/29546969
#SPJ4
if the water pressure at a pump station at sea level is 4,000,000 pa, how high can the water be pumped uphill, and how fast will it flow out of a faucet at a washing station at sea level? group of answer choices 408 m; 45 m/s
At a washing station at sea level, the water is pushed 408 meters uphill and flows out of a faucet at 45 meters per second.
What is the water pump's pressure?According to the needs of the application, the discharge water is pressured. The water is pressurized to 3000psi to 5000psi for cleaning applications. They are extremely highly pressurized in the pressure ranges of 30000psi to 50000psi for cutting purposes. Water that must be pushed in a specific length of time is called a flow rate.
How are water pumps operated?Wastewater or sewage is gathered at a pump station and kept there in a chamber. When the level of collected sewage reaches its maximum, a high-pressure integrated pump is used to lift the sewage through a discharge system.
To know more about water pressure visit:-
https://brainly.com/question/15188101
#SPJ4
a lathe rotating at is used to reduce the diameter of an long section of stock metal rod from a diameter of to at a feed rate of . the force measured at the tool post was down and pulling the tool toward the workpart. what is the specific energy of this material?
If a lathe turning at a feed rate is used to decrease a long section the stock metal rod's diameter from a diameter of to, the material's specific energy M RR = 109.96 cm3/min.
In hydrology, what is specific energy?At any cross-section section of a canal, measured just above channel bottom, the total energy per cent weight of fluid. Where y is the flow depth, v seems to be the average velocity, & g is gravitational attraction, makes up the formula for specific energy, or E.
What is a substance's particular energy?The proportion of necessary energy (E) towards the volume of removed material is referred to as specific energy (SE) (V). This variable can be used to calculate how much energy is expended on removing material.
To know more about specific energy visit;
https://brainly.com/question/29829977
#SPJ4
Can somebody answer this
Answer:
answer is c
Explanation:
....................
a circus performer is coasting in a small cart at a velocity of 3.5 m/s east. As she coasts, she collided with a small weighted juggling pin that was at rest in the ground.
The momentum of the performer and cart will decrease. The momentum of the juggling pin increases. The overall momentum of the entire system will remain the same.
What is law of conservation of linear momentum?According to the law of conservation of momentum, the sum of the momentum of a body before and after the collision will be equal.
m₁.u₁ + m₂u₂ = m₁ v₁ + m₂.v₂
where m₁ & m₂ is the mass of objects, u₁ & u₂ are their initial speed while v₁ & v₂ is final speed.
Given the initial velocity of the performer and cart is u₁ = 3.5 m/s
The final velocity of the performer and cart = 3.4 m/s
As the velocity of the performer and cart decreases therefore its momentum will increase.
The juggling pin was at rest initially, but its velocity increased from 0 to 6 m/s. Therefore its momentum increases.
Learn more about the law of conservation of linear momentum, here:
brainly.com/question/17140635
#SPJ1
in an experiment with n = 6 and preal = 0.15, what is the power using a = 0.012 tail?
An experiment with an a = 0.012 tail when N = 6 & Preal = 0.15 powered is 1.0000
A scientific experiment where you do a series of actions and carefully track their outcomes to learn new knowledge. The students will conduct basic laboratory experiments. run, do, perform, or carry out an experiment.
Because it provides scientists with a set of well-organized steps to perform in order to reply to questions or assertions about the natural world, experimentation is essential to science. Additionally, experimenting produces vital data and results that help to verify the veracity and dependability of assertions made in an endeavor to fully know the world.
To know more about experiment
https://brainly.com/question/22967013
#SPJ4
Part A Determine the equivalent capacitance between points a and b for the combination of capacitors shown in (Figure 1). Express your answer in terms of the variables C1, C2, C3, and C4. O AO in O 2 ? Cab = Submit Request Answer
The equivalent capacitance between points a and b for the combination of capacitors shown in Figure 1 is equal to C1 + C2 + C3 + C4.
The equivalent capacitance between points a and b for the combination of capacitors shown in Figure 1 can be determined by evaluating the capacitances of each individual capacitor and then adding them together. The capacitance of C1 is directly connected between points a and b, so it is simply C1. The capacitance of C2 and C3 are in parallel, so the equivalent capacitance of these two is C2 + C3. Similarly, the capacitance of C4 is in parallel with C2 + C3, so the equivalent capacitance of the combination is C1 + C2 + C3 + C4. Therefore, the equivalent capacitance between points a and b for the combination of capacitors shown in Figure 1 is equal to C1 + C2 + C3 + C4.
Learn more about capacitance here
https://brainly.com/question/13200919
#SPJ4
A mass spectrometer has a magnetic field of 5.00 mT. It is used to test an unknown particle which has a charge of 2e and is travelling at 100 m/s. If the resulting radius of curvature for the ion is measured to be 1.67 mm:
A. What is the particle's mass?
B. Which element is it? (You may require a periodic table.)
Answer:
A mass spectrometer uses a magnetic field to separate ions based on their mass-to-charge ratio. The mass of an ion can be calculated from its charge, velocity, and the radius of curvature of its path in the magnetic field, using the formula m = (qBv)/(2πr), where m is the mass, q is the charge, B is the magnetic field, v is the velocity, and r is the radius of curvature.
In this case, the magnetic field is 5.00 mT, the charge of the unknown particle is 2e, and its velocity is 100 m/s. The radius of curvature of the ion's path is measured to be 1.67 mm. Plugging these values into the formula above, we get:
m = (2e * 5.00 mT * 100 m/s) / (2π * 1.67 mm) = 0.24 g/mol
Therefore, the mass of the unknown particle is 0.24 g/mol.
To determine which element the particle is, we can use the periodic table to find an element with a mass-to-charge ratio of 0.24 g/mol. The element with the closest match is magnesium (Mg), which has a mass-to-charge ratio of 24.31 g/mol. Therefore, the unknown particle is likely to be a magnesium ion (Mg²⁺).
value: 10.00 points The embroyblast eventually differentiates into the O zygote. O blastocyst O primary germ layers. O sperm and egg ReferenceseBook & Resources Multiple Choice
The zygote has only one cell. The embryo has many cells. A zygote is known as a zygocyte in medicine. A diploid eukaryote is the name given to the embryo. During the zygote's mitosis, an embryo is created.
A stage after the zygote stage is an embryo. Fertilization is the process that creates the zygote. Human blastocyst (day 5), also known as a blastula, is the term used to describe the hollow cellular mass that develops in the early stages of development. The blastocyst is made up of cells that form an inner cell mass (ICM, embryo blast), an exterior trophectoderm (TE, trophoblast) layer, and a blastocoel (fluid-filled cavity). The first week after conception is when the zygote stage develops. The mix of DNA in the zygote's genome is.
To learn more about zygocyte please click on below link
https://brainly.com/question/29769026
#SPJ4
what parameters do hubble's law relate to each other? galaxy rotation speed and luminosity galaxy classification and mass cepheid star period and luminosity galaxy recession velocity and distance galaxy mass and distance
The fundamental relationship between recessional velocity and distance is known as Hubble's law. The relationship between recessional velocity and redshift, excepting very small redshifts, depends on the cosmological model used.
What can we infer about the connection between distance and recessional velocity from Hubble's law?One observational consequence of the expansion is that galaxies appear to move away from you more quickly the further they are from you. As a result, the recessional velocity and distance are related. The Hubble's Law is the name of this phenomenon.
What main principle underlies Hubble's law?In big bang cosmology, the Hubble law postulates that galaxies move away from the Earth at a rate that is proportional to their distance.
To know more about Hubble's law visit:-
https://brainly.com/question/13705068
#SPJ4
What does λ mean in the wave equation?
In physics, the symbol λ (lambda) is used to represent the wavelength of a wave.
What is wave equation?
Wave equation is an equation that describes the behavior of waves, such as sound and light. It is used to analyze wave patterns and their interactions. Wave equations can be used to describe the propagation of waves in different media, such as air, water, and solids. Wave equations are also used to study wave phenomena, including resonance, diffraction, interference, and scattering.
It is typically used in the wave equation, which describes the relationship between the speed, frequency, and wavelength of a wave. λ is usually represented by the Greek letter lambda and is used to calculate the speed of a wave in a medium or vacuum. λ can also be used to calculate the frequency of a wave when the speed and wavelength are known.
To know more about wave equation click-
https://brainly.com/question/25699025
#SPJ4
What is the relationship between wavelength and frequency Mcq?
The equation =c/f relates wavelength and frequency. There is an inverse relationship between wavelength and frequency.
What connection exists between the frequency and wavelength of EM waves?
One crucial equation connects them all: The speed of light is equal to the frequency times the wavelength of any electromagnetic wave. If we know the other measurement, we can use this connection to calculate the wavelength and frequency of the any electromagnetic wave.
What is a wavelength differs from a frequency in ways?The distance between the crests of two waves is known as the wavelength, which also applies to troughs. The number of vibrations that pass across a certain area in a second is the frequency, which is expressed in seconds per cycle (Hz) (Hertz). This article discusses how wavelength and frequency relate to one another.
To know more about Wavelength and frequency visit:
https://brainly.com/question/2288272
#SPJ4
Which of the following statements is false? The magnetic field of a current-carrying wiredepends on the magnitude of the current. decreases inversely with the distance from the wire. is directed circularly around the wire. exists only if the current in the wire is changing.
The magnetic field produced by a conductor that is carrying current relies on the conductor's current and the point's distance from it. The magnetic field runs parallel to the wire in a perpendicular direction.
Given by r = 2 m and B = 5, the magnetic field strength created by a straight wire carrying current is 5. Inquiry 4: As seen in the diagram below, a straight conductor carrying a current of 10A is parallel to another conductor carrying a current of 5A on the other side. Since all closed-loop currents make their own magnetic fields and magnetic fields operating on closed-loop circuits may produce current, magnetism and electricity are closely related. Oersted made the discovery that electric current had a magnetic influence.
To learn more about magnetic field please click on below link
https://brainly.com/question/14848188
#SPJ4
draw the structure of the product(s) obtained when d-ribose reacts with br2/h2o/caco3
The balance of the equation 2Br2 + CaCO3 + H2O = CaBr2 + CO2 + 2HBrO is ensured by the equal distribution of each element between the reactants and the products.
Bromination can take place in a number of ways, depending on the reactant. A saturated molecule is bromine using the free radical technique. An unsaturated hydrocarbon undergoes bromination through an addition mechanism. An aromatic compound is bromined by an electrophilic substitution procedure.
Meta-bromo-benzoic acid and hydrogen bromide are the end products of the chemical reaction between bromine and benzoic acid described above. The bromine water test is a simple way to tell fructose from glucose. The glucose undergoes an oxidation reaction to produce glucuronic acid after interacting with the bromine water solution. Since bromine water has a modest oxidizing effect, fructose does not oxidize in it.
To know more about reactants
https://brainly.com/question/16856363
#SPJ4
How is the rule for the interaction between magnetic poles similar to the rule for the interaction between electrically charged particles?
In that, it states that similar poles repel, unlike poles attract and that the force is proportional to the inverse square of the distance between two poles.
The pushing or tugging of an object is considered to be exerting force. Whenever two things interact, push and pull are the result. Stretching and crushing are further examples of force expressions.
An external agent known as a force has the power to alter a body's state of rest or motion. There is a direction and a magnitude to it. When applying force, it is important to consider both the direction of the force and the actual application of the force.
You should emphasize this as the main point of your education at this level because a push or a pull is referred to as a force. In our daily lives, forces appear in many different ways.
Learn more about force here:
https://brainly.com/question/29096913
#SPJ4
consider the circuit shown in (figure 1). the initial current in the inductor is is(0+) = 0.
The questions is incomplete so I answered it in general way.
I= 1/L∫Vdt, where I is the current flowing through the inductor, L is the inductor's inductance, and V is the voltage across the inductor, is the formula that determines the inductor current depending on these input parameters. You will frequently come across the expanded formula I= I0 + 1/L∫Vdt.
A passive two-terminal electrical device known as an inductor, also known as a coil, choke, or reactor, stores energy in a magnetic field as electric current passes through it. Typically, an inductor is made out of insulated wire twisted into a coil.
According to Faraday's law of induction, when the current through the coil changes, the time-varying magnetic field induces an electromotive force (emf) (voltage) in the conductor. Lenz's law states that the induced voltage has an opposing polarity (direction) to the change in current that caused it. Inductors so reject any changes in the current flowing through them.
To know more about inductor
https://brainly.com/question/15893850
#SPJ4
What is the mass of an airplane that is flying at 246 m/s and has a momentum of 1.968 x 107 kg-m/s? Show your work.
The mass of an airplane is 79878 kg.
What is momentum?The product of a particle's mass and velocity is its momentum. Momentum is a vector quantity, meaning it has both magnitude and direction. According to Isaac Newton's second equation of motion, the force acting on a particle equals the time rate of change of momentum.
Given that: an airplane is flying at 246 m/s and has a momentum of 1.968 x 10^7 kg-m/s.
Hence, mass of the airplane = momentum of the airplane/speed
= (1.968 x 10^7 kg-m/s)/246 m/s
= 79878 kg.
Learn more about momentum here:
https://brainly.com/question/24030570
#SPJ1
Which is not a property of covalent solids?
A brittleness
B high melting point
C high lattice energy
Covalent solids exhibit low melting points and boiling points. Therefore, option B is correct.
What are covalent compounds?In a covalent compound, the covalent bond is formed by the mutual sharing of electrons that can hold all molecules together. Shared electron pairs are difficult to give away as nuclei of two elements together share the electrons therefore these types of bonds are stronger.
A covalent network solid can be described as a chemical compound in which the atoms are bonded by covalent bonds in a continuous network. The covalent solids are generally brittle in nature.
The melting points for covalent solids are generally low while high melting points for ionic solids.
Learn more about the covalent compound, here:
brainly.com/question/12144907
#SPJ1
According to the diagram, the approximate abundance of oxygen atoms in the galaxy is __________.
1/10 that of hydrogen
1/100 that of hydrogen
1/1000 that of hydrogen
1/10,000 that of hydrogen
According to diagram, the approximate abundance of oxygen atoms in the galaxy is 1/1000 that of hydrogen.
If we look along the vertical axis, we find that the point for oxygen lies about halfway between the points 10−4 and 10−2, near to 10−3, which is 0.001 or 1/1000. Therefore, the abundance of oxygen atoms is about 1/1000 that of hydrogen.
The general trend in elemental abundance in our galaxy: There is a general trend of increasing abundance with increasing atomic number. Exceptional rule is that elements with odd atomic numbers tend to be more abundant compared to elements with even atomic numbers. These abundances decrease smoothly from atomic number of 6 to atomic number of 20. These abundances fluctuate randomly.
To know more about galaxy here
brainly.com/question/2905713
#SPJ4