50 Points! Multiple choice algebra graphing question. Which cube root function is represented by the graph? Photo attached. Thank you!

Answer:

no its not

Step-by-step explanation:

Using the slope-intercept form, the slope is Undefined. The slope of a perpendicular line to a vertical line is zero.

Answer:

Step-by-step explanation:

The equation for the height h of the object after t seconds is given by:

h = -16t^2 + 145t + 2

To find when the height will be 230 feet, we can set h = 230 and solve for t:

230 = -16t^2 + 145t + 2

We can simplify this equation by moving all the terms to one side:

16t^2 - 145t + 228 = 0

To solve for t, we can use the quadratic formula:

t = (-b ± sqrt(b^2 - 4ac)) / 2a

where a = 16, b = -145, and c = 228. Plugging in these values, we get:

t = (-(-145) ± sqrt((-145)^2 - 4(16)(228))) / 2(16)

t = (145 ± sqrt(21025 - 14592)) / 32

t = (145 ± sqrt(6433)) / 32

t ≈ 0.56 seconds or t ≈ 9.17 seconds

Therefore, the height of the object will be 230 feet at approximately 0.56 seconds or 9.17 seconds after it is thrown.

To find when the object will reach the ground, we can set h = 0 and solve for t:

0 = -16t^2 + 145t + 2

Again, we can simplify this equation by moving all the terms to one side:

16t^2 - 145t - 2 = 0

Using the quadratic formula again, we get:

t = (-(-145) ± sqrt((-145)^2 - 4(16)(-2))) / 2(16)

t = (145 ± sqrt(21249)) / 32

t ≈ 9.51 seconds or t ≈ 0.15 seconds

Therefore, the object will reach the ground at approximately 0.15 seconds or 9.51 seconds after it is thrown. However, since the negative solution does not make physical sense in this context, the object will reach the ground after approximately 9.51 seconds.

~~~Harsha~~~

Apply the fraction rule:

[tex]\text{a}\times\dfrac{\text{b}}{\text{c}} =\dfrac{\text{a}\times\text{b}}{\text{c}}[/tex]

Answer:

[tex]\longrightarrow\boxed{\bold{\frac{\text{fx}}{\text{g}}}}[/tex]

This shows that the two circles intersect at a point P, and that the distance between their centers, OP1OP2, is less than the sum of their radii, r1 + r2. Thus, the two circles touch each other internally at point P.

You must calculate each circle's radius and centre in order to accomplish this. The circles will externally touch if the total of the radii and the space between the centres are identical. The circles will internally touch if the variations in radii and the separation between their centres are equal.

Let C1 and C2 stand for the two circles, with O1 and O2 serving as their respective centres. Let r1 and r2 represent the radius of C1 and C2, respectively.

Let's say that point P is where the two circles converge. The Pythagorean Theorem thus gives us:

OP1² = r1²

OP2² = r2²

OP1² + OP2² = (r1 + r2)²

Simplifying the third equation, we get:

OP1² + OP2² = r1² + 2r1r2 + r2²

The left half of this equation can be rewritten as (OP1 + OP2)2 - 2OP1OP2. When we simplify the equation above and substitute this, we get:

(OP1 + OP2)² = (r1 + r2)² + 2OP1OP2

Since OP1 and OP2 are both positive, we have:

(OP1 + OP2)²> (r1 + r2)²

Therefore, we must have:

OP1OP2 < r1 + r2

To know more about circles visit:-

https://brainly.com/question/29142813

#SPJ1

The measure of ∠DOT is equal to 58°

The measure of ∠TOU is equal to 32°.

In Mathematics and Geometry, a complementary angle refers to two (2) angles or arc whose sum is equal to 90 degrees (90°).

Mathematically, a complementary angle can be calculated by using this mathematical equation:

Q + R = 90°

Where:

Q and R are measure of the angles subtended.

By substituting the given parameters into the complementary angle formula, the sum of the angles is given by;

(7x + 2) + 4x = 90.

11x + 2 = 90

11x = 90 - 2

x = 88/11

x = 8.

For the measure of ∠DOT, we have;

∠DOT = (7x + 2)

∠DOT = 7(8) + 2

∠DOT = 58°

For the measure of ∠TOU, we have;

∠TOU = 4x

∠TOU = 4(8)

∠DOT = 32°.

Read more on complementary angle here: brainly.com/question/17952433

#SPJ1

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

Answer:

a) The common difference between consecutive terms is 9. Thus, the nth term can be expressed as:

n(9)+(-3)

b) To find the 10th term, we substitute n=10 in the expression we just found:

10(9) + (-3) = 87

Therefore, the 10th term of the sequence is 87.

Answer:

350° 33' 10".

Step-by-step explanation:

To convert the decimal degree 350.5527° to degrees, minutes, and seconds, we can use the following steps:

Therefore, 350.5527° is equivalent to 350° 33' 10".

Answer: B. 12

Step-by-step explanation:

1) Alan can make 2.5 cookies per min

2) Abi can make 8/3 which is 2.7.

3) overall, 5.2 cookies per minute can be made.

multiple 5.2 x 6 and you get around 31.5?

then subtract =1. you have 30.5, now add onto that number 31.5, which is another 6 minutes. since you're still only subtracting 1, the answer would be above 60, which is 5 dozen, and it only took 12 mins

(7) The volume of the triangular based prism is 41.16 m³.

(8) The volume of the haxagonal based prism is 1793.4 cm³.

Volume is the space ocuppied by a solid shape.

(7) To calculate the volume of the triangular based prism, we use the formula below

Formula:

Where:

Substitute these values into equation 1

(8) Also, to calculate the volume of the hexagon based prism, use the formula below

Where:

SUbstitute these values into equation 2

Learn more about volume here: https://brainly.com/question/1972490

#SPJ1

Answer:

y= -1/5x-5

Step-by-step explanation:

You can use the slope formula and the slope intercept form which is y=mx+b.

Asnwer: 30 minutes

Explanation:

10 laps in 20 minutes is 1 lap every 2 minutes.

So we get this:

1 lap = 2 minutes

But we want 15 laps, so multiply both sides by 15 to get:

15 laps = 30 minutes

The surface area of the square pyramid given above would be = 400ft²

The diagram above is a typical example of the square based pyramid which has four triangles connected to a vertex.

To calculate the surface area of the given figure, the formula that should be used would be = b² +2bs

where b = base length= 10ft

s = slant height= 15ft

Surface area = 100+2(10×15)

= 100+300

= 400ft²

Therefore the surface area of the square based pyramid given above would be = 400ft².

Learn more about area here:

https://brainly.com/question/25292087

#SPJ1

The graph of the function h(x) is then added as an attachment

From the question, we have the following parameters that can be used in our computation:

h(x) = 2|x|

Also, we have

f(x) = |x|

When the function f(x) = |x| is compressed by a factor of 2, we do the following

We multiply 2 to the function equation

So, we have

h(x) = |x| * 2

Evaluate

h(x) = 2|x|

This means that the transformed function is passes through (x, 2y) of the original function

The graph of the function h(x) is then added as an attachment

Read more about transformation at

https://brainly.com/question/4289712

#SPJ1

It would take approximately 7.5 years (or 7 years and 6 months) for the value of the account to reach $1,540, assuming the money grows at a rate allowing it to double every 10 years.

To solve this problem, we can use the formula for exponential growth:

[tex]A = P * (1 + r)^t[/tex]

where:

A = final amount (in this case, $1,540)

P = principal amount (initial investment, in this case, $840)

r = rate of growth (as a decimal, in this case, the rate at which the money doubles every 10 years, or 1/10 = 0.1)

t = time (in years, which we need to find)

Plugging in the values:

[tex]1,540 = 840 * (1 + 0.1)^t[/tex]

Dividing both sides of the equation by 840:

[tex]1.83333... = (1.1)^tTaking the natural logarithm of both sides:ln(1.83333...) = ln((1.1)^t)Using the property of logarithms that ln(a^b) = b * ln(a), we get:ln(1.83333...) = t * ln(1.1)Finally, dividing both sides by ln(1.1) to solve for t:t = ln(1.83333...) / ln(1.1)[/tex]

Using a calculator, we can find that t ≈ 7.5 (rounded to the nearest tenth of a year).

So, it would take approximately 7.5 years (or 7 years and 6 months) for the value of the account to reach $1,540, assuming the money grows at a rate allowing it to double every 10 years.

To know more about amount visit,

https://brainly.com/question/25658867

#SPJ1

The calculated measure of the arc XYZ is 83 degrees

From the question, we have the following parameters that can be used in our computation:

The circle

The angles created by secants and tangents that intersect outside a circle, which states that

The size of the angle formed by these two lines is equivalent to half the numerical difference between the measures of the arcs that they cut out from the circle.

So, we have

XYY = 1/2 * (166 - 0)

Evaluate

XYY = 83

Hence, the measure of the angle is 83 degrees

Read more about angles at

https://brainly.com/question/25215131

#SPJ1

Therefore , the solution of the given problem of probability comes out to be pizza won't be a cheese pizza is roughly 0.7089, or 70.89%.

Any considerations technique's fundamental objective is to determine the likelihood that a claim is true or that a particular incident will take place. Any number range from one to one, when 0 traditionally signifies a percentage and 1 typically implies the degree of certainty, can be used to represent chance. A probability illustration shows the likelihood that a particular event will occur.

Here,

The total number of pizzas made yesterday can be determined using the information provided as follows:

2121 cheese pizzas total.

Pizzas with vegetables: 1414

2323 pepperoni pizzas total.

1414 sausage pizzas were consumed.

Total pizzas produced were

=>2121 + 1414 + 2323 + 1414 = 7272.

Therefore, there were 2121 cheese pizzas prepared yesterday out of a total of 7272 pizzas.

The likelihood that the following pizza will be a cheese pizza is calculated as follows:

=> 2121 / 7272

The likelihood that the next pizza prepared won't be a cheese pizza is thus:

=> 1 - (2121 / 7272) = 5151 / 7272

Therefore, a conservative estimate of the likelihood that the following pizza won't be a cheese pizza is roughly 0.7089, or 70.89%.

To know more about probability visit:

https://brainly.com/question/11234923

#SPJ1

The area in square centimeters, of the trapezoid below is equal to 84.4 cm².

In Mathematics and Geometry, the area of a trapezoid can be calculated by using this mathematical equation (formula):

Area of trapezoid, A = ½ × (a + b) × h

Where:

a and b represent the base areas of a trapezoid.

h represent the height of a trapezoid.

By substituting the given side lengths into the formula for the area of a trapezoid, we have the following:

Area of trapezoid, A = ½ × (7.9 + 13.2) × 8

Area of trapezoid, A = 84.4 cm².

Read more on trapezoid here: brainly.com/question/4758162

#SPJ1

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

a. 4. b > 0

If b is positive, then we know it will be greater than 0.

b. 1. s ≤ 0

If s is nonpositive, this means it is negative or 0. We will use a less than or equal to symbol.

c.  3. w ≥ -8

If w is greater than or equal to -8, we will use a greater than or equal to symbol.

Answer:

7(-6) + 4(8) = -42 + 32 = -10, so (-6, 8) is the solution to this system of equations.

The answer is Yes.

Therefore, P(z > 0.97) = 0.166 using standard normal distribution table.

A standard normal distribution table, also called a z-score table or a standard normal table, is a table that provides the area under the curve to the left of a specific z-score value in a standard normal distribution. A standard normal distribution is a normal distribution with a mean of zero and a standard deviation of one.

The table usually includes positive z-score values in the right-hand column and the second decimal place in the top row. The intersection of a specific z-score value and decimal place provides the area under the curve to the left of that z-score value.

For example, if we want to find the area under the curve to the left of a z-score value of 1.32, we would locate the row with 1.3 in the top row and the column with 0.02 in the right-hand column. The intersection of this row and column gives the area under the curve to the left of 1.32, which is 0.9066.

Using a standard normal distribution table or calculator, we can find the probability of z being greater than 0.97 is approximately 0.166. Therefore, P(z > 0.97) = 0.166.

Learn more about standard normal distribution below.

https://brainly.com/question/26822684

#SPJ1

This is the equation that represents the situation: 3q + 7 = 40.

In mathematics, an equation is a statement that asserts the equality of two expressions, usually separated by an equals sign (=). An equation states that two expressions have the same value, and it provides a way to find the unknown values of variables by manipulating the expression using algebraic operations. Equations are used in a variety of fields, including physics, chemistry, engineering, economics, and many others, to model relationships and solve problems.

Here,

Let's call the length of the fourth side "x".

Since the three sides of the quadrilateral are the same length, we know that they are each equal to "q".

The perimeter of a quadrilateral is the sum of all its sides, so we can write:

q + q + q + x = 40

Simplifying, we get:

3q + x = 40

We also know that the length of the fourth side is 7 inches, so we can substitute that in for "x":

3q + 7 = 40

This is the equation that represents the situation.

To know more about equation,

https://brainly.com/question/9312365

#SPJ1

Answer:

See below!

Step-by-step explanation:

Length = 735 meters

Width = 756 meters

Area = length × width

Area = 735 × 756

Area = 555660 m²

To find the area of largest square, we first need to find the highest common factor of 735 and 756.

HCF of 735 and 756:

= 21

This means the length of largest square will be 21 m.

Now,

= length × length

= 21 × 21

No. of squares = Total area / Area of largest square

No. of squares = 555660 / 441

[tex]\rule[225]{225}{2}[/tex]

The calculated base area of the paperweight is 9.6 square cm.

To calculate the base area of the paperweight, we can use the formula for the volume of a three-dimensional object:

Volume = Base area x Height

In this case, we know that the height of the paperweight is 4cm and the volume is 38.4 cubic cm.

So we can rearrange the formula and solve for the base area:

Base area = Volume / Height

Substituting the values we have:

Base area = 38.4 cubic cm / 4cm

Base area = 9.6 square cm

Therefore, the base area of the paperweight is 9.6 square cm.

Read more about area at

https://brainly.com/question/24487155

#SPJ1

Answer:

7

Let's call the width = x

width : x

so (x + 2x-4)2 = 34 (perime formula of a rectangle) x+2x-4 = 7

3x = 21

x = 7

so x is 7

The value of the annuity after 9 years is approximately $1,044.56. The interest earned on the annuity after 9 years is approximately $244.56.

A financial contract known as an annuity offers a series of recurring payments over a predetermined length of time. A monthly, quarterly, or annual payment schedule is available when buying an annuity from an insurance provider. The payments are made until the annuitant's death or for a predetermined amount of time.

Deferred annuities and immediate annuities are the two categories under which annuities fall. Deferred annuities are a particular kind of annuity where the payments are postponed for a predetermined amount of time, typically several years. On the other hand, an instant annuity starts paying out as soon as the annuity is bought.

The value of annuity is given by the formula:

[tex]A = P * ((1 + r)^n - 1) / r[/tex]

Substituting the given values we have:

[tex]A = $100 * ((1 + 0.04)^9 - 1) / 0.04\\A = $100 * (1.04^9 - 1) / 0.04[/tex]

A ≈ $1,044.56

Hence, the value of the annuity after 9 years is approximately $1,044.56.

Now, the interest is givn as:

Interest = A - (P * n)

Substituting the values we have:

Interest = $1,044.56 - ($100 * 9)

Interest ≈ $244.56

Hence, the interest earned on the annuity after 9 years is approximately $244.56.

Learn more about annuity here:

https://brainly.com/question/23554766

#SPJ1

Answer:

First, we need to convert 1,200 meters to inches:

1,200 meters * 39.3701 inches/meter = 47,244.12 inches

Next, we need to find the circumference of the wheel:

Circumference = π * Diameter

Circumference = 3.14 * 12 inches

Circumference = 37.68 inches

To find the number of revolutions, we can divide the total distance traveled (47,244.12 inches) by the distance traveled per revolution (37.68 inches):

47,244.12 inches ÷ 37.68 inches/revolution ≈ 1,254 revolutions

Rounding to the nearest whole number, it will take approximately 1,254 revolutions of the wheel to travel 1,200 meters on a child's bicycle.

Answer:

2((3(4) + 4(7) + 3(7)) = 2(12 + 28 + 21) = 2(61) = 122 square meters

The value "Sin 100°" is greater than "sin 250°", that is, sin 100° > sin 250°

To compare the values of sin 100° and sin 250°, we need to understand the behavior of the sine function. The sine function oscillates between -1 and 1 over a period of 360°, with its maximum value of 1 at 90° and its minimum value of -1 at 270°.

Using the sine wave, we can see that sin 100° is located in the second quadrant, where the sine values are positive, while sin 250° is located in the third quadrant, where the sine values are negative. Therefore, sin 100° is greater than sin 250°, because sin 100° has a positive value closer to the maximum value of 1, while sin 250° has a negative value closer to the minimum value of -1.

Read more about Sin

brainly.com/question/30232355

#SPJ1

$15 is the cost of a 6-ounce serving cost.

What is the cost price?

The precise value that corresponds to the unit price paid is represented by the cost price. In some stock market theories, this value is utilized to establish the value of stock holdings and is used as a key determinant of profitability.

Here, we have

Given: If a 24-pound EP rib of beef costing $45.00 is purchased oven-ready, and 1/4 of it is lost during roasting.

EP = 24 lb costing $45

1/4th lost during roasting.

Remaining = 24 lb - (1/4) of 24 lb

= 24 lb - 6 lb

= 18 lb

Now, this roast should match the cost of the original EP.

Cost per lb = (cost of beef originally)/(quantity of roasted beef)

= 45/18 dollar per lb

Cost of 6-ounce serving cost = (45/18)×6 = $15.

Hence, $15 is the cost of a 6-ounce serving cost.

To learn more about the cost price from the given link

https://brainly.com/question/19104371

#SPJ1