0. Earth's rock is continually cycling through different states and locations. The diagram below shows the rock cycle. The labels for two processes are missing.
Weathering of
ROCKS at surface
IGNEOUS
ROCK
Uplin
SEDIMENTARY ROCK
METAMORIHIC ROCK
Melting
Which of these processes could be happening at the stage labeled 2?
o folding and mountain building
chemical changes due to heat and pressure
compaction and cementation of weathered sediments
subduction of an oceanic plate beneath a continental plate

We use roman numerals to indicate the oxidation state of metal atoms when naming compounds especially in the case of coordination compounds. It is a standard system of nomenclature.

Oxidation state of a species is the number electrons gained or lost. Oxidation state increases if electrons are lost from the atom and it will be decreased if electrons are gained.

For example, copper is in + 2 oxidation state in CuSO₄, thus it can be indicated as Cu(II). Copper can exists is +3 oxidation too. Thus the representation will be Cu (III).

All the transition metals like copper exhibit various oxidation state. So it is important to indicate in which oxidation state they are in a particular compound. In the compound Fe₂O₃, iron is in + oxidation state whereas in FeSO₄, it can be +2 . Thus it is important to note whether it is Fe (II) or Fe (III).

To find more about oxidation states, refer the link below:

https://brainly.com/question/11313964

#SPJ2

Answer:

D if I’m correct

Explanation:

The percent composition :

Al : 15.79%

S : 28.07%

O : 56.14%

Given

Aluminum, Oxygen, and Sulfur in Al₂(SO₄)₃ compound

Required

The percent composition

Solution

Molar mass of Al : 27 g/mol

Molar mass of O : 16 g/mol

Molar mass of S : 32 g/mol

Molar mass of Al₂(SO₄)₃ : 342 g/mol

% Al = 2.MM Al / MM Al₂(SO₄)₃ x 100%=2.27/342 x 100%=15.79%

% S = 3. MM S / MM Al₂(SO₄)₃ x 100%= 3.32/342 x 100%=28.07%

% O = 12.MM O / MM Al₂(SO₄)₃ x 100%= 12.16/342 x 100%=56.14%

Answer:

The water (the substance) that passes through the filter paper is called the filtrate. If your mixture is a solution, such as salty water, then filtering will not separate the salt from the water. Instead, by heating the soluton the solvent (water) evaporates leaving the solid (salt) behind.

Explanation:

Answer:

Answer:

c-3 h-8 o-1 total-12

Explanation:

you just count the atoms

Answer:

Deeper Voice (low-frequency sound)

Explanation:

For me, I would talk to an elderly person who has trouble hearing me in a deeper voice because at least it's not too loud. If you talk to a person with a higher voice (high-frequency) it can just affect their hearing more.... when you scream, that a high-frequency and sometimes it bothers your ears, so for me in general I would use a deeper voice.

Hope this helped!

Have a supercalifragilisticexpialidocious day!

Answer:

Potential energy

Answer:

ur answer, hope it helps you...

Answer:

Centrifugation is a technique used for the separation of particles from a solution according to their size, shape, density, viscosity of the medium and rotor speed. The particles are suspended in a liquid medium and placed in a centrifuge tube. The tube is then placed in a rotor and spin at a define speed.

Explanation:

The reaction given is;

TiCl4 + H2O --> TiO2 + HCl

The reaction is not balanced, upon balancing it is given as;

TiCl4 + 2H2O → TiO2 + 4HCl  

a. How many moles of H2O are needed to react with 6.50 moles of TiCl4?

From the reaction;

1 mol of TiCl4 requires 2 mol of H2O

6.50 mol of TiCl4 would require x mol of H2O

1 = 2

6.5 = x

x = 6.5 * 2 / 1 = 13.0 mol

b. How many moles of HCl are formed when 8.44 moles of TiCl4 react?

From the equation of the reaction;

1 mol of TiCl4 reacts to form 4 mol of HCl

8.44 mol of TiCl4 reacts to form x mol of HCl

1 = 4

8.44 = x

x = 8.44 * 4 / 1 = 33.76 mol

Answer:

C. Solid in liquid

Explanation:

Seawater is an example of a solid in liquid solution.

Sea water is made up of:

A liquid solution is always made up of a solute being dispersed within the solvent medium.

The solvent is the liquid or fluid medium.

Such solutions are homogeneous because the solute particles are distributed evenly or uniformly in the solvent.

The solute is usually present in smaller amount compared to the solvent.

Answer:

0.43mole

Explanation:

Given parameters:

Mass of C₂H₆   = 13g

Unknown:

Number of moles  = ?

Solution:

To solve this problem we need to first find the molar mass of the given compound.

 Molar mass of C₂H₆ = 2(12) + 6(1)  = 30g/mol

So;

 Number of moles  = [tex]\frac{mass}{molar mass}[/tex]  

Number of moles  = [tex]\frac{13}{30}[/tex]    = 0.43mole

Answer:

Zn. + 2 HCl ----------> ZnCl2. + H2

Explanation:

Mass of Zn in mole = 3.27/ 65.38= 0.050010.... mol

Mass of HCl in mole = 3.3/ 73= 0.044....mol

Hence, limiting reagent is HCl

Molar mass of ZnCl2= 136.38g

Let mass of ZnCl2 be x

x = 3.3*136.38÷ 73 = 6.165...

So, the mass of ZnCl2 is 6.17 g

Answer:

Problem: The Ba3(PO4)2 (molar mass = 601.93 g/mol) precipitate that formed from a salt mixture has a mass of 0.667 g.

The molar mass of barium phosphate is 601.93 g/mol.

Molar mass is defined as the mass of a compound divided by the number of moles which is the amount of substance .It is a bulk quantity and not a molecular property of a substance . They are mostly calculated by adding the atomic masses of constituent elements in a compound.

It is an average of many particles or molecules.Molar mass is an intensive property as it does  not depend on size of the sample.It has units of kg/mol. Molar masses of elements is given by relative atomic mass of element whereas that of compounds is given by the sum of relative atomic mass multiplied by the molar mass constant.

They are never measured directly , they are measured from the standard atomic masses.

Learn more about molar mass,here:

https://brainly.com/question/22997914

#SPJ2

Answer:

Biodiesel has a higher oxygen content (usually 10 to 12 percent) than petroleum diesel. ... Biodiesel is more chemically active as a solvent than petroleum diesel. As a result, it can be more aggressive to some materials that are normally considered safe for diesel fuel. Biodiesel is much less toxic than petroleum diesel.

Answer:

Explanation:

The picture shows two similar structures bonded together so it can not be an atom or molecular compound .

It is a molecule . Each structure ( lobe ) represents atom of oxygen . Molecule of oxygen contains two atoms bonded together .

Molecule of oxygen = O₂ .

Answer:

A balanced chemical equation occurs when the number of the atoms involved in the reactants side is equal to the number of atoms in the products side.

Explanation:

In this chemical reaction, nitrogen (N2) reacts with hydrogen (H) to produce ammonia (NH3). The reactants are nitrogen and hydrogen, and the product is ammonia.

Answer:

1. Volume of osmium = 0.044 mL

2. Volume of Hydrogen = 11123.47 mL

3. Osmium is 251390 times denser than hydrogen

Explanation:

From the question given above, the following data were obtained:

Density of osmium = 22.6 g/mL

Density of Hydrogen = 8.99×10¯⁵ g/mL

Mass of osmium = 1 g

Mass of Hydrogen = 1 g

1. Determination of the Volume of osmium.

Density of osmium = 22.6 g/mL

Mass of osmium = 1 g

Volume of osmium =?

Density = mass /volume

22.6 = 1 / volume

Cross multiply

22.6 × volume = 1

Divide both side by 22.6

Volume = 1 / 22.6

Volume of osmium = 0.044 mL

2. Determination of the Volume of Hydrogen.

Density of osmium = 8.99×10¯⁵ g/mL

Mass of osmium = 1 g

Volume of osmium =?

Density = mass /volume

8.99×10¯⁵ = 1 / volume

Cross multiply

8.99×10¯⁵ × volume = 1

Divide both side by 8.99×10¯⁵

Volume = 1 / 8.99×10¯⁵

Volume of Hydrogen = 11123.47 mL

3. Determination of the number of times osmium is denser than hydrogen.

Density of osmium (Dₒ) = 22.6 g/mL

Density of Hydrogen (Dₕ) = 8.99×10¯⁵ g/mL

Dₒ / Dₕ = 22.6 / 8.99×10¯⁵

Dₒ / Dₕ = 251390

Cross multiply

Dₒ = 251390 × Dₕ

Thus, osmium is 251390 times denser than hydrogen.

Answer:

C

Explanation:S has less energy than P, and P has less energy than D and so on.

Answer: is a base

Explanation:

Answer:

The dissolving of the Kool-Aid powder into water is a physical change. The powder, the solute, is dissolved in water, the solute, forming a Kool-Aid solution.

Answer:

There are 3.01x10²³ molecules of sucrose

Explanation:

In order to calculate the number of molecules of any atom or compound, we need to use the Avogadro number which is 6.02x10²³. This number could represent atoms or molecules of any mole of compound or atom.

In other words, 1 mole of a certain atom or compound has 6.02x10²³ molecules or atoms.

we have 0.5 moles of sucrose, all we just need to do is a simple rule of 3:

If 1 mole contains 6.02x10²³ molecules

then 0.5 moles will contain:

n° molecules = 0.5 * 6.02x10²³ / 1

Hope this helps

Answer:

c

Explanation:

The sun is at the center of the solar system, and the comet orbits around it.

The sun is at the center of the solar system, and the comet orbits around it. Therefore, option C is correct. Comets are orbiting around sun through the elliptical orbit.

Comets are tiny spatial objects that are composed of ice, dust and gases. Comets go around the sun in a highly elliptical orbit. They can spend hundreds and thousands of years out in the depths of the solar system before they return to sun at their perihelion.

Like all orbiting bodies, comets follow Kepler's Laws - the closer they are to the Sun, the faster they move. While a comet  is at a great distance from the Sun, its exists as a dirty snowball several kilometers across.

But as it comes closer to the sun, the warming of its surface causes its materials to melt and vaporize producing the comet's characteristic tail. Comet tails can be as long as the distance between the Earth and the Sun. Hence, option  C is correct.

Find more on comets:

https://brainly.com/question/30032291

#SPJ6

Answer:

7.5 MOL

Explanation:

Answer:

The percent of n would be 7.10

Explanation: