a.) K 2=K 1 +GmM( r 21− r 11)=2.2×10 7J
b.) K 2 +GmM( r 11− r 21)=6.9×10 7 J
Applying Law of Energy conservation :
K 1+U 1
=K 2+U 2
⇒K 1− r 1GmM
=K 2− r 2 GmM
where M=5.0×10 23kg,r1
=> R=3.0×10 6m and m=10kg
(a) If K 1
=5.0×10 7J and r 2
=4.0×10 6 m, then the above equation leads to
K 2=K 1 +GmM (r 21− r 11)=2.2×10 7J
(b) In this case, we require K 2
=0 and r2
=8.0×10 6m, and solve for K 1:K 1
=K 2 +GmM (r 11− r 21)=6.9×10 7 J
Learn more about Kinetic energy on:
https://brainly.com/question/12337396
#SPJ4
What type of system would allow light and air to enter and exit? A. Connected
B. Closed C. Isolated D. Open
Answer:
An open system.
Explanation:
An isolated system allows the exchange of neither energy nor matter with the surroundings. A closed system allows the exchange of energy, but not matter. An open system allows the exchange of both energy and matter.
Notice that in this question, light (electromagnetic wave) is a form of energy. The entry and exit of light allows this system to exchange energy with its surroundings- just as how the earth receives energy from the sun. Additionally, this system could exchange energy with its surroundings through the exchange of matter (in particular, air) with its surroundings.
Thus, the system in this question is an open system.
write the first law of motion
Answer:
A object in rest will remain in rest and a object in motion will move at a constant pace and in a straight line unless a unbalanced force acts upon it
Explanation:
give brainliest if you'd like
Newton's first law: the law of inertia
Newton's first law states that
if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force.
hope you understand thank you.
If the plates are pulled twice as far apart, but are kept connected to the battery, the electric field between the plates will be
Electric field between two parallel plates will be halved as it was before.
What is the electric field between two plates:
The electric field lines of two parallel plates can be represented by straight lines perpendicular to both plates surfaces while carrying arrows that point from +Q plate A toward -Q plate B.
we know that,
The electric field between plates:
E=V / d
where,
V is battery voltage
d is separation distance between plates.
now If the plates are pulled twice as far apart, but are kept connected to the battery,
the separation distance becomes,
d' = 2d
so the new electric field will be:
E' = V / d'
substituting the values,
E' = V / ( 2d )
E' = 1/2 ( V /d )
E' = 1/2 E
hence we can conclude that
Electric field between plates will be halved as it was before.
Learn more about Electric field between plates here:
https://brainly.com/question/14788793
#SPJ4
A hot metal ball is hung in an oven that is maintained at 700 K; and it cools. When the temperature of the ball is 950 K, it is losing heat at a rate of 0.15 J/min. At what rate will the ball lose heat when the ball reaches 820 K
Answer:
At 820 K, the object lose heat at the rate of 0.072 J/min.
Explanation:
By using Newton's cooling law, the formula to calculate the rate of cooling R is,
R=-k(T-To)
where k is a constant, T is the temperature of the object and To is the temperature of the surrounding.
At T=950 K, R=0.15 J/min and To=700 K,
Therefore, 0.15=-k(950-700)
k=0.15/250 J/K min.
At T=820 K,
R=-(0.15 / 250)*(820-700)
R=-0.072 J/min
Therefore the rate of heat loss at T=820 K is 0.072 J/min.
Know more about Newton's cooling law.
brainly.com/question/14513140
#SPJ10
What is the potential energy in J of a bungee jumper standing on a 0.109 km bridge that weighs 85 kg?
Considering the definition of potential energy, the potential energy of the bungee jumper is 90,889.65 J.
Potential energyPotential energy is the energy that measures the ability of a system to do work based on its position. In other words, this is the energy that a body located at a certain height above the ground has.
Gravitational potential energy is the energy associated with the gravitational force. This will depend on the relative height of an object to some reference point, the mass, and the strength of gravity.
So for an object with mass m, at height h, the expression applied to the gravitational energy of the object is:
Ep= m×g×h
Where:
Ep is the potential energy in joules (J).m is the mass in kilograms (kg).h is the height in meters (m).g is the acceleration of fall in m/s² (approximately 9.81 m/s²).Potential energy in this caseIn this case, you know:
m= 85 kgg= 9.81 m/s²h= 0.109 km= 109 m (being 1 km= 1000 m)Replacing in the definition of potential energy:
Ep= 85 kg × 9.81 m/s² × 109 m
Solving:
Ep= 90,889.65 J
Finally, the potential energy of the bungee jumper is 90,889.65 J.
Learn more about potential energy:
https://brainly.com/question/24933254
https://brainly.com/question/15896499
https://brainly.com/question/14456667
#SPJ1
What is the instantaneous velocity of a freely falling object 14 s after it is released from a position of rest
The instantaneous velocity of the object is 137.2 m/s along the downward direction.
Instantaneous velocity: The velocity of an object at a particular instant of time is called the instantaneous velocity.
Note: The y-axis is taken along the upward direction so acceleration due to gravity will be negative.
Any object that is falling freely is acted upon by gravity. The first equation of motion gives the relationship between initial velocity, the velocity at time t, time, and acceleration. The equation is,
v=u+at
where v is the velocity at time t, u is the initial velocity, t is the time, and g is the acceleration due to gravity. Since the object starts from rest, its initial velocity is zero.
For the given case, u=0, a=-9.8 m/s^2 and t=14 s. Put the values in the equation to get the instantaneous velocity of the object at t=14 s.
v=0+(-9.8)(14)
v=-137.2 m/s
The negative sign indicates the object is falling downward.
Learn more about instantaneous velocity,
https://brainly.com/question/13372043
#SPJ4
A ball of mass 200 g rolls along the ground at a speed of 5.2 m/s. Calculate the kinetic energy of the ball. Give your answer to two significant figures.
Answer:
Kinetic Energy = 2.7J
Explanation:
Conversion :
200g = 0.2kg
Kinetic Energy = ½ × mass × (velocity)²
Kinetic Energy = ½ × 0.2kg × (5.2m/s²)
Kinetic energy = ½ × 0.2kg × 27.04m²/s²
Kinetic Energy = 2.7J
The right answer is "2.7 J"
Answer explanation:
Remember to convert grams to kilograms first by dividing by 1000.
Kinetic energy
= 1/2 × mass × speed2
= 1/2 × 0.2 kg × (5.2 m/s)^2
= 2.7 J (to 2 sig. fig.)
Hope it helps ✨✨
A baseball with a mass of 0.145 kilograms collides with a bat at a velocity of 44 meters/second. the ball bounces off the bat with a speed of 49 meters/second in the opposite direction. what is the impulse? a. 4.32 newton∙seconds b. 7.25 newton∙seconds c. 8.23 newton∙seconds d. 9.42 newton∙seconds e. 13.5 newton∙seconds
The impulse is 13.5 N-s.
As we know that impulse is a sudden force acting on a body for a short time interval is called Impulse.
Δp = FΔt
Mathematically, the change in momentum will equal impulse.
Δp = mΔv
→ Δp = 0.145(49-(-44))
→ Δp = 0.145(93)
Δp = 13.5 Newton-second
Thus, option (e) is correct.
Learn more about impulse here:
https://brainly.com/question/3994441
#SPJ4
A key falls from a bridge that is 43 m above the water. It falls directly into a model boat, moving with constant velocity, that is 17 m from the point of impact when the key is released. What is the speed of the boat
The speed of the boat is 4 m/s.
The system for pace is speed = distance ÷ time.
To work out what the devices are for pace, you want to understand the gadgets for distance and time. In this case, distance is in meters (m) and time is in seconds (s), so the gadgets could be in meters according to second (m/s).
To resolve for speed or price use the components for pace, s = d/t which means that pace equals distance divided through time.
The pace is a manner of measuring how quickly something is transferring or being performed, or something moving speedily. An example of speed is a vehicle being driven 45 miles in keeping with the hour. An instance of velocity is a person cleaning a room in 10 minutes. An example of velocity is how quickly a jaguar runs.
Learn more about speed here https://brainly.com/question/6504879
#SPJ4
During a process, 2 kJ of work are done on a system, and 3 kJ of heat are given away by the system. What is the change of internal energy of the system
The change in the internal energy of the system is increased by 1 Kj.
Determination of the internal energyAccording to the first law of thermodynamics,
Energy can only be changed in form; it cannot be generated or destroyed, according to the basic rule of thermodynamics. External work or heat exchange over the barrier are all examples of energy transfer for any system. These result in a change in the control volume's energy reserves.Therefore, Δ∪=q+w
[Δ∪= change of internal energy; q=heat; w=work]
Provided,
q= -3Kj (as heat is given away)
w= +2Kj (work done in the system is positive)
So, Δ∪= -3 + (+2) Kj
⇒Δ∪= -1 Kj
Therefore the internal energy of the system is increased by 1 kj.
Learn more about thermodynamics here:
https://brainly.com/question/1368306
#SPJ4
How could you describe the motion of the skiers?
Answer:
slows down
Explanation:
slow down and speed up
Astrologers claim that your personality traits are determined by the positions of the
planets in relation to you at birth. Scientists argue that these gravitational effects are so
small that they are totally insignificant. What is the gravitational attraction between you
(40 kg) and Mars? NOTE: M Mars
23
6.42×10²³ kg, d
= 2.25×10¹¹ m.
11
=
earth-mars
Answer:
Zodiac signs
Explanation:
According to dr. Ed coyle, the fda does not regulate dietary supplements. When is it acceptable for a high school athlete to include dietary supplements in their diets?.
Athletes that energy drinks are not appropriate for hydration or as dietary supplements.
When should athletes use supplements?Vitamins and minerals are recommended when an athlete has low blood values, a medical condition that may lead to poor absorption of nutrients, or other potential nutrition/eating challenges.
As per the question
FDA doesn't regulate dietary supplements
Dietary supplement companies must ensure their products are safe before marketing and comply with other labeling and quality requirements, such as good manufacturing practices.
The FDA inspects facilities for compliance and monitors adverse event reports.
Dietary supplements should be used only upon the advice of one’s health care provider for health-related reasons – not for the purpose of gaining a possible competitive advantage.
They recommend that coaches, athletic directors, and other school personnel develop strategies that address the prevalence and growing concerns of using dietary supplements. Such strategies may include conversations with athletes and their parents about the potential dangers of dietary supplement use.
Athletes should be encouraged to pursue their athletic goals through hard work, appropriate rest and good nutrition, not unsubstantiated dietary shortcuts.
Learn more about dietary supplement here:
https://brainly.com/question/10912932
#SPJ2
Consider a river flowing toward a lake at an average velocity of 3 m/s at a rate of 510 m3/s at a location 90 m above the lake surface. Determine the total mechanical energy of the river water per unit mass and the power generation potential of the entire river at that location.
The mechanical energy of the river water per unit mass is 887.4 J/kg
The power generated is 452.574 MW.
Given:
Average velocity (v) = 3 m/s
Rate = 510 m³/s
Height (h) = 90 m
We know, that mechanical energy is the sum of potential energy and kinetic energy.
So,
E = [tex]\frac{1}{2}[/tex]×m×v² + m×g×h
and energy per mass unit is
E/m = [tex]\frac{1}{2}[/tex]×v² + g×h
E/m = [tex]\frac{1}{2}[/tex]×3² + 9.81×90
E/m = 887.4 J/kg
So, mechanical energy per unit mass is 887.4 J/kg.
Power generated is expressed as;
Power generated = energy per unit mass ×rate×density
Density of water = 1000 kg/m³
Power generated = 887.4× 510× 1000
Power generated = 452574000 W
So, the power generated is 452.574 MW.
Learn more about mechanical energy here:
https://brainly.com/question/15191390
#SPJ4
A new ride being built at an amusement park includes a vertical drop of 70.0 meters. Starting from rest, the ride vertically drops that distance before the track curves forward. The velocity at the bottom of the drop is 12.0 m/s and the mass of the cart and passengers is 3.5 x 104 kg.
a. Calculate the potential, kinetic and total energy at the top.
b. Calculate the potential, kinetic and total energy at the bottom.
c.Is the total energy at the top equal to the total energy at the bottom? Justify your observation.
The potential, kinetic and total energy at the top are 2.38 x 10⁷ Joule, 0 Joule, 23.8 x 10⁶ Joule respectively and the potential, kinetic and total energy at the bottom are 0 Joule, 2.448 x 10⁶ Joule, 2.448 x 10⁶ Joule respectively. moreover the total energies are not same as not all potential energy converting into Kinetic energy of vertically drop of ride as the ride moves straight afterwards so that also need some energy which is again coming from potential energy.
Energies at the top:-
Potential energy = mgh
Potential energy = 3.4 x 10⁴ × 10 × 70 Joule
Potential energy = 2.38 x 10⁷ Joule
Kinetic Energy = (1/2) mv²
Kinetic Energy = (1/2) × 3.4 x 10⁴ × 0²
Kinetic Energy = 0 Joule
Total Energy = Potential Energy + Kinetic Energy
Total Energy = ( 23.8 x 10⁶ Joule ) + ( 0 Joule )
Total Energy = 23.8 x 10⁶ Joule
Energies at the bottom:-
Potential energy = mgh
Potential energy = 3.4 x 10⁴ × 10 × 0 Joule
Potential energy = 0 Joule
Kinetic Energy = (1/2) mv²
Kinetic Energy = (1/2) × 3.4 x 10⁴ × 12²
Kinetic Energy = 2.448 x 10⁶ Joule
Total Energy = Potential Energy + Kinetic Energy
Total Energy = ( 0 Joule ) + ( 2.448 x 10⁶ Joule )
Total Energy = 2.448 x 10⁶ Joule
The total energies are not the same since not all potential energy is converted into Kinetic energy of the vertical drop of the ride as the ride travels straight thereafter thus that also requires some energy which is again derived from potential energy.
So we have calculated the potential, kinetic and total energy at top and bottom both, and also stated the reason of why total energy at the top is not equal to the total energy at the bottom.
Learn more about Energy here:
https://brainly.com/question/18963960
#SPJ10
Susie operates a restaurant in the ski resort town of Asvail. She has decided to group her Other Expenses categories in terms of either fixed expenses or variable expenses. Place an X in the Variable Expense column for those expenses that vary with sales volume. For expenses that do not vary with sales, place an X in the Fixed Expense column.
Other Expenses Variable Expense Fixed Expense Linen rental Plano rental Ice
Insurance Pension plan payments Snow shoveling fees (parking lot) Paper products Kitchen equipment lease (mixer)
Long-term debt payment Real estate tax
Expenses including those for linen service, ice, and paper goods might fluctuate depending on demand. Other variables are constants. No change occurs to it. This is further explained below.
What is Susie's operation?Generally, Fixed expenditures, in contrast to the more unpredictable variable costs like advertising, happen regularly at the same time each year regardless of fluctuations in revenue or other variables. It doesn't get the performance bus.
Here, we are given with table.
[tex]\begin{tabular}{|c|c|c|}Other Expenses & Variable Expense & Fixed Expense. \\ Linen rental & $X$ & \\ piano rental & & $X$ \\ ice & $X$ & $X$ \\insurance & & $X$ \\ Pension plan & & $X$ \\Snow shoveling dees cparkinglot) & & \\Paper products & $X$ & $X$ \\ Kituen equipment & & $X$ \\ lease (mixer) & & \\Longterm debt. & & \\ Realestate tax. & & \\\end{tabular}[/tex]
In conclusion,
Linen rental, ice, and Paper Products are Variable expenses because it is based on requirementOthers are fixed by other factors. it's not affectedRead more about Expenses
https://brainly.com/question/17136150
#SPJ1
A steel needle when placed carefully on water can be made to float.when the detergent is added to the water it sink.explain the observation
Answer:
The surface tension of plain water can cause a needle to float.
Evidently, the addition of detergent to the water reduces the surface tension of the liquid causing the needle to sink.
When we add detergent to water, the surface tension of water immediately decreases, then the surface tension cannot balance the blade and it will sink.
What is Surface tension?Surface tension is defined as the phenomenon that occurs when the surface of a liquid is in contact with another phase which may also be a liquid. Liquids obtain the least possible surface area while the surface of the liquid behaves like an elastic sheet.
Surface tension depends not only on the forces of attraction between particles within a given liquid but also on the forces of attraction of the solid, liquid or gas in contact with it where energy is responsible for the occurrence of surface tension, which can be thought of as approximately equal to the work or energy required to remove a surface layer of molecules in a unit area.
When we add soap to water, the surface tension of the water decreases to the point where the surface tension is no longer strong enough to "float" the needle.
Thus, when we add detergent to water, the surface tension of water immediately decreases, then the surface tension cannot balance the blade and it will sink.
Learn more about Surface tension, here:
https://brainly.com/question/11348644
#SPJ2
16/07/2021 23
question 9 of 10
homework
which movement will require the greatest amount of work to be
done?
this activity is
a force of 10n moving an object a distance of 3.0 m
b*
assessment
percentage
a force of 10n moving an object a distance of 5.0m
a force of 15n moving an object a distance of 3.0m
c attempts
a force of 15n moving an object a distance of 5.0m
D. The movement that will require the greatest amount of work to be
done is a force of 15n moving an object a distance of 5.0m (75 J).
What is work done?Work is said to be done when an applied force moves an object over a given distance.
W = Fd
where;
F is the applied forced is the displacement of the objectA force of 10n moving an object a distance of 3.0 mW = 10 x 3 = 30 J
A force of 10n moving an object a distance of 5.0mW = 10 x 5 = 50 J
A force of 15n moving an object a distance of 3.0mW = 15 x 3 = 45 J
A force of 15n moving an object a distance of 5.0mW = 15 x 5 = 75 J
Thus, the movement that will require the greatest amount of work to be
done is a force of 15n moving an object a distance of 5.0m (75 J).
Learn more about work done here: https://brainly.com/question/8119756
#SPJ1
11. Distinguish between solid and liquid states of matter in terms of intermolecular forces
Answer:
In solid it is high because the molecules are closely packed.
In liquid it is lesser than solids as they are loosely
packed.
In gas it is least because they are very loosely packed
A toy rocket with a mass of 300 g takes off in a vertical direction under the influence of gravity. It burns fuel at the rate of 25 g/s. The exhaust speed of the gases is 80 m/s. What is the speed of the rocket at the end of 10 seconds
The speed of the rocket at the end of 10 seconds is 66.7 m/s.
Speed of the rocket at end of 10 secondsThe speed of the rocket at the end of 10 seconds is calculated as follows;
F = mv/t
where;
F is the force of the rocketv is velocity of the rockett is time of motionm is mass of the rocketF = (m/t)v
F = (0.025 kg /s) x 80 m/s
F = 2 N
Acceleration of the rocketF = ma
a = F/m
a = 2/(0.3)
a = 6.67 m/s²
Velocity after 10 secondsv = at
v = 6.67 x 10
v = 66.7 m/s
Thus, the speed of the rocket at the end of 10 seconds is 66.7 m/s.
Learn more about speed here: https://brainly.com/question/6504879
#SPJ1
With what speed must a ball be thrown vertically from ground level to rise to a maximum height of 50 m
The speed with which the ball must be thrown vertically from ground level to rise to a height of 50 m is 31.305 m/s.
Given values:
Maximum height reached from ground level, h_max = 50 m
Final velocity of the ball, v = 0 m/s
Calculation of initial speed of the ball:
Step 1:
Using Newton's third equation of motion, we get:
v² = u² + 2as
where, v is the final velocity of ball
u is initial velocity of the ball
a is acceleration of ball
s is the maximum height attained by the ball
Step 2:
Here, the acceleration of the ball will be given as:
a = -g
= -9.8 m/s²
where, g is acceleration due to gravity
Applying this value in above equation we get:
v² = u² - 2gh_max
Re-arranging above equation, we get:
u² = v² + 2gh_max
u =√(v² + 2gh_max)
Step 3:
Applying values in above equation we get:
u =√((0 m/s)² + 2(9.8 m/s²)(50 m)
=√980
= 31.305 m/s
Therefore, the speed with which the ball must be thrown from ground level is 31.305 m/s in order to reach a maximum vertical height of 50 m.
Learn more about kinematic equations of motion here:
https://brainly.com/question/5955789
#SPJ4
The heating system in Jeff and Tony's new home takes cool air and passes it through the heat source using a fan or blower. What type of heat do they have
If it takes cool air and passes it through the heat source using a fan or blower, the type of heat transfer is convection heat transfer.
What is heat transfer by convection?
Convection is the transfer of heat from one place to another due to the movement of fluid.
During heat transfer by convection, cold air replaces hot risen air.
Thus, if it takes cool air and passes it through the heat source using a fan or blower, the type of heat transfer is convection heat transfer.
Learn more about convection here: https://brainly.com/question/893656
#SPJ1
An ice skater performs a pirouette (a fast spin) by pulling in his outstretched arms close to his body. What happens to his moment of inertia about the axis of rotation
Moment of inertia decreases about the axis of rotation.
The term "moment of inertia" refers to the quantity that describes how a body resists angular acceleration and is calculated by multiplying each particle's mass by its square of distance from the rotational axis.
Means,
I=mr² where,
I= Moment of inertia
m= mass of particle
r= distance of the particle from the axis of rotation.
So, Moment of inertia is directly proportional to the square of the distance from the axis of rotation.
I ∝ r²
As the distance of body from the axis of rotation increases, moment of inertia also increases and vice versa.
So, that's why when an ice skater performs a pirouette (a fast spin) by pulling in his outstretched arms close to his body , then he/she will decrease his/her distance from the axis of rotation.
That's why moment of inertia decreases about the axis of rotation.
Learn more about Moment of Inertia here https://brainly.com/question/3406242
#SPJ4
A 2280 kg car, moving at 24.2 m/s, runs into a car that has a mass of 2180 kg
and is moving at 15.3 m/s in the same direction. The cars stick together after
the collision. Assuming momentum is conserved, what is their final velocity?
OA. 18.6 m/s
OB. 17.2 m/s
O C. 19.8 m/s
OD. 16.7 m/s
Answer:
The answer is C.19.8 m/s because it's their common velocity after the collision of the two cars.
Explanation:
Hello !
look at the attachment above ☝️ and if you have any questions you're welcome.
How does a person standing on the ground correctly explain why you, sitting on the left side of a slippery back car seat, slide to the right when the car makes a high speed left turn
Answer:
if the car is traveling north, the person is also traveling north,
If the car turns to (left) to the west, the person will still tend to travel to the north and will slide to the right (north) on a slippery car seat.
why are experiments often performed in labs?
Answer:
experiments provide course effective means of quantitative process kind of examing the bounds of theory is specially when the Nolan reality is important analysis
Explanation:
regardless of such topic the purpose of laboratory experiment is to test theory occurs by focusing on one server predictive elements of the theory is isolating the influence of elements on outcomes
A storage tank 23 m high is filled with pure water. (Assume the tank is open and exposed to the atmosphere at the top) the pressure is 225400 Pa.
Calculate the magnitude of the net force that acts on a square access hatch at the bottom of the tank that measures 0.6 m by 0.6 m.
The force of the body is obtained as 81144 N.
What is pressure?The term pressure is defined as the mass per unit area of a body. We have the pressure at the top of the tank as 225400 Pa and the area of the tank as 0.6 m by 0.6 m.
Thus;
Pressure = Force/Area
Force = Pressure * Area
Force = 225400 Pa * 0.6 m *0.6 m
Force = 81144 N
Learn more about pressure of a body:https://brainly.com/question/15087945
#SPJ1
What is the acceleration of a ball that slows down from 45 m/s to 20 m/s in 0.5 seconds?
This is a uniformly accelerated rectilinear motion exercise.
To start solving this exercise, we obtain the following data:
Data:Vf = 20 m/sVo = 45 m/st = 0.5 secondsTo find the acceleration, divide the change in velocity by the time over which the velocity changed. The SI unit of speed is the meter per second (m/s). To find the acceleration, the velocity is divided by the time expressed in seconds (s). Therefore, the unit of acceleration is m/s².
We apply the following formula:
[tex]\large\displaystyle\text{$\begin{gathered}\sf a=\frac{V_{f}-V_{o}}{t} \end{gathered}$}[/tex]
where,
Vf = final speedVo = Initial VelocityT = Timea = accelerationWe substitute our data in the formula and solve:
[tex]\large\displaystyle\text{$\begin{gathered}\sf a=\frac{20 \ m/s-45 \ m/s}{0.5 \ s} \end{gathered}$}[/tex]
[tex]\large\displaystyle\text{$\begin{gathered}\sf a=\frac{-25 \ m/s}{0.5 \ s} \end{gathered}$}[/tex]
[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf a=-50 \ m/s^{2} \end{gathered}$}}[/tex]
Answer: The acceleration when the ball slows down is -50 m/s².
The uniformly accelerated rectilinear motion, also known as uniformly varied rectilinear motion, is one in which a mobile moves on a straight path being subjected to a constant acceleration.
To calculate the acceleration, we obtain the data:Final Speed (Vf) = 20 m/s
Initial Speed (Vo) = 45 m/s
Time (t) = 0.5 sec
Acceleration (a) = ¿?
To calculate the acceleration, subtract the initial velocity minus the initial velocity, divided by the time.
We apply the following acceleration formula:a = Vf - Vo / tTo solve, we substitute our data into the given formula:
a = 20 m/s - 45 m/s / 0.5 seca = -25 m/s / 0.5 seca = -50 m/s²Answer: The acceleration with which the ball stops is -50 m/s².
See more at:https://brainly.com/question/18800905
Consider a blimp that can be approximated as a 3-m diameter, 8-m long ellipsoid and is connected to the ground. On a windless day, the rope tension due to the net buoyancy effect is measured to be 120 N. Determine the rope tension when there are 50 km/h winds blowing along the blimp (parallel to the blimp axis).
Step 1 of 6
Diameter of the blimp,
Length of the blimp,
Rope tension,
The velocity of the wind,
Step 2 of 6
The drag force acting on the blimp can be calculated using the formula given below,
(1)
Where, is the drag coefficient is the density of air.
A is the frontal area of the blimp.
V is the velocity of the wind.
Step 3 of 6
The frontal area of the parachute,
Here,
Substitute the value in the above equation.
The drag coefficient for the balloon is,
Step 4 of 6
From the table properties of air,
The density of air at 1atm pressure and is,
The velocity of air,
Step 5 of 6
Now, substitute all the known values in equation (1)
Step 6 of 6
Now, rope tension is the sum of rope tension due to the buoyancy effect and the force due to the wind blowing.
Learn more about the velocity at
https://brainly.com/question/4931057
#SPJ4
Beryllium has a charge of 2, and bromine has a charge of –1. which is the best name for the ionic bond that forms between them? beryllium bromide beryllium bromine bromine berylliumide bromide berylliumide
The best name for the ionic bond that forms between them is Beryllium Bromide.
We have been provided with data,
Beryllium charge, q = 2
Bromine charge, q = -1
As we know the valance electron of Be is +2 and the valance electron of bromine is -1. Since one is metallic and the other is non-metallic.
Now, when they combine they exchange valance electron, and bromine change into bromide so they form Beryllium Bromide.
So, the best name for the ionic bond that forms between them is Beryllium Bromide.
Learn more about ionic bonds here:
https://brainly.com/question/21464719
#SPJ4