you manage a network that has multiple internal subnets. you connect a workstation to the 192.168.1.0 subnet using the default subnet mask. this workstation can communicate with some hosts on the private network, but not with other hosts. you run ipconfig /all and see the following:

The answer to the following query is authenticated, by the user.

Users are referred to as authenticated users if they access our accounts or those of others for legitimate reasons through a straightforward login or logon process without hacking. Simply said, authenticated users are those actual individuals who log in using their real username and password.

A domain in computer networking is a collection of devices that share the same administrative authority. An organization might have a domain that encompasses all of the computers in its offices, for instance. Subdomains, which are smaller groups of computers within a domain, can be created.

Learn more about Special Identity Group :

https://brainly.com/question/28145492

#SPJ4

A program that will monitor the weather and road conditions of the Flat Bridge in St. Catherine and display a warning sign accordingly is given below:

Program code ( main . py ) -

# read weather and road type

weather = input ( " Enter the weather type ( Rainy | Dry ) : " )

road = input ( ' Enter the road type ( Flooded | Wet ) : ' )

# check if it is rainy

if 'rainy' = = weather.lower():

   # road is flooded

   if 'flooded' == road.lower():

       print('Road flooded…please detour')

  else:  # not flooded

       print('Road wet…drive with caution')

else:  # dry weather

  print('Safe journey…drive with care')

Enter the weather type(Rainy | Dry): rainy

Enter the road type(Flooded | Wet): wet

Road wet…drive with caution

Read more about programming here:

https://brainly.com/question/23275071
#SPJ1

It is TRUE to state that The design of the research could be any of the following:

The first is Descriptive Research.

Descriptive Research is a sort of research that is used to characterize a population's characteristics. It collects data that is used to answer a variety of what, when, and how inquiries about a certain population or group.

Descriptive research "aims to shed light on present challenges or problems using a data gathering procedure that allows them to characterize the situation more thoroughly than was previously feasible." Simply said, descriptive studies are used to characterize different features of phenomena.

Casual Experimentation or research is the study of cause-and-effect relationships. To establish causality, the variation in the variable suspected of influencing the difference in another variable(s) must be discovered, and the changes from the other variable(s) must be computed (s).

A descriptive correlational study is one in which the researcher is primarily concerned with characterizing connections between variables rather than attempting to demonstrate a causal relationship.

Time series analysis is a method of examining a set of data points gathered over a period of time. Time series analysis involves analysts capturing data points at constant intervals over a predetermined length of time rather than merely occasionally or arbitrarily.

Learn more about research:
https://brainly.com/question/28467450
#SPJ1

Full Question:

The design of the research could be any of the following:

True or False?

A set of boolean operands will only have a logical AND (&&) operator (logical conjunction) that is true if and only if all of the operands are true. If not, it will be untrue.

A logical operator is a symbol or word that joins two or more expressions in such a way that the value of the resulting compound expression solely depends on the value of the original expressions and the meaning of the operator. The AND, OR, and NOT logical operators are often used. The logical NOT (!) operator transforms truth into untruth and vice versa. Normally, boolean (logical) values are used with it. When applied to non-Boolean values, it returns true unless its sole operand can be transformed to false. The two vertical line symbols stand in for the logical OR operator. In contrast to the logical AND operator, it only returns false if both of the expression's claims are untrue.

Learn more about Operator here-

https://brainly.com/question/2945136

#SPJ4

Answer: B, Pages

Explanation: The software named "Pages" is exclusive to Apple products.

The configuration that provides both fault tolerance and consistent performance for applications like streaming audio and video services is option A.) Active/Passive clustering.

A system's configuration in communications or computer systems refers to how each of its functional elements is organized in relation to their nature, number, and distinguishing features. Configuration frequently involves picking the right hardware, software, firmware, and documentation.

Note that One active server and one passive standby server make up an active/passive cluster. A third-party load balancer determines when a passive legacy failover is necessary and directs users to the appropriate node.

Therefore, When molecules hit the receiver surface in the active model, they are absorbed. The receiver is a hypothetical border that has no impact on the behavior of molecules in the passive model. To determine transformations between the receiver signals, two methods are described.

Learn more about configuration  from

https://brainly.com/question/13484609
#SPJ1

See full question below

Given knowledge of load balancing and clustering techniques, which configuration provides both fault tolerance and consistent performance for applications like streaming audio and video services?

A.) Active/Passive clustering

B.) Active/Active clustering

C.) First in, First out (FIFO) clustering

D.) Fault tolerant clustering

The software serves as an example of an exception.

Program mistakes are managed using exceptions.

The Python program that uses comments to clarify each line is as follows:

This line defines the function get age.

Defining get age()

Age input is taken for this.

age = int("Age:" input)

If the age is between 18 and 75, this returns the age (inclusive)

if (age >= 18 and = 75):

inbound age

#If not, the ValueError is returned.

else:

declare ValueError ("Age is out of range or invalid")

The fat burning heart rate function is defined by this.

age = def fat burning heart rate

This gives you your heart's fat-burning rate.

return (0.7 * age - (220))

#The main starts right here.

#The attempt block is now in motion.

try:

Age input is taken for this.

get age = age ()

This displays your heart rate when burning fat.

fat burning heart rate(age),"bpm", "Fat burning heart rate for a", age,"year-old:"

Learn more about program here-

https://brainly.com/question/3224396

#SPJ4

The best way to incorporate a pivot table into a slideshow is to link it to the spreadsheet source file. That way, whenever the source file changes, the pivot table will update automatically.

What is spreadsheet?
A spreadsheet is indeed a computer programme used for organising, organising, analysing, and storing tabular data. Spreadsheets were created as electronic alternatives to paper accounting worksheets. Data typed into table cells serves as the program's input. Each cell may have text, numeric information, or the output of algorithms that instantly calculate and show a value dependent on the content of other cells. One of these electronic documents is referred to by the word "spreadsheet." Users of spreadsheets can change any stored value or watch how it affects the results of calculations. Because various scenarios may be quickly studied without manual recalculation, the spreadsheet is advantageous for "what-if" analysis. Multiple sheets can interact with one another in modern spreadsheet software, and data can be shown graphically or as text and numbers.

To learn more about spreadsheet
https://brainly.com/question/26919847
#SPJ4

Answer: D ( to pull specific information from PivotTable to answer the question)

Explanation:

Edg 2022

Answer:

10,0000 because its a regular for

Explanation:

Exa: 345 round off 400 answer

A simple, non-working structure of how we want code to behave is called pseudo code. It is frequently utilized for formulating solutions to problems and the initial steps in creating algorithms.

If a student receives a test score of at least 90

A collection of guidelines known as an algorithm is utilized to resolve issues that can be expressed in pseudocode. Algorithms are typically complete pieces of code that can be utilized to solve a problem. The pseudocode shown above might be used to generate the following algorithm in Java:

If testScore exceeds 90,

'otherwise if (testScore >= 80 && testScore = 89)'; studentGrade

gradeofstudent = "B";

}

Learn more about algorithm here-

https://brainly.com/question/22984934

#SPJ4

The loop is used to repeatedly run the block of code in accordance with the condition stated in the loop. It entails repeated execution of the same code, which helps to traverse an array's items while also saving code.

#include <iostream>

#include <vector>

using namespace std;

int main() {

  const int SCORES_SIZE = 4;

  vector<int> lowerScores(SCORES_SIZE);

  unsigned int i;

  for (i = 0; i < lowerScores.size(); ++i) {

     cin >> lowerScores.at(i);

  }

  /* Your solution goes here  */

  for (i = 0; i < lowerScores.size(); ++i) {

     cout << lowerScores.at(i) << " ";

  }

  cout << endl;

  return 0;

}

Learn more about Loop here-

https://brainly.com/question/14390367

#SPJ4

The leaf-node level at the base of the tree is made up of the eight transaction hashes, which are also referred to as transaction IDs. Pairs of these transactions are hashed together.

Hashing together pairs of TXIDs yields a merkle root, which is a brief but distinctive fingerprint for all the transactions in a block. Then, every block header will provide a brief summary of each transaction contained in the block because this merkle root is used as a field in a block header. The user can confirm whether it contains a transaction in the block by using a Merkle tree, which adds up all of the transactions in a block and creates a digital fingerprint of the complete set of activities. A data structure used in computer science applications is called a Merkle tree.

Learn more about transaction here-

https://brainly.com/question/24730931

#SPJ4

It is referred to as a when information is used for another purpose. data's secondary use. There is a policy that states that any information sharing between organizations must have the explicit consent of the consumer. opt-in.

Data mining, also known as knowledge discovery in databases, is a process used in computer science to identify intriguing and practical patterns and relationships in massive data sets. When you visit a website, a little text file called a cookie is downloaded and saved to your computer's hard disk. When you return to the same website later, the web server will be able to read the information in this text file. There are many uses for cookies. Queries. In a database, queries can carry out a wide range of tasks.

Learn more about information here-

https://brainly.com/question/27798920

#SPJ4

A decision support system (DSS) is a computer program application that helps businesses make better decisions. Large volumes of data are analyzed, and the best solutions are then presented to an organization.

One might be argued that a DSS is anything that offers logical, quantifiable, and scientific data to assist leaders in making educated decisions. Examples of decision support systems include complex decision support software, manual systems, etc.

Note that it is a group of computerized information systems called decision support systems (DSS) provide assistance for decision-making processes. Interactive computer-based systems and subsystems.

Learn more about decision support system from

https://brainly.com/question/7655444
#SPJ1

While doing a technical assessment to determine network vulnerabilities, you used the TCP XMAS scan, All open ports will ignore the packets.

Here's the full question:

While doing a technical assessment to determine network vulnerabilities, you used the TCP XMAS scan. What would be the response of all open ports?

a. The port will send an ACK

b. The port will send a SYN

c. The port will ignore the packets

d. The port will send an RST

What is port scanning?

Port scanning refers to a method used to detect which ports in a given network are open and available for use. It also involves sending packets to certain ports on a host to inspect responses to detect potential, underlying vulnerabilities.  

During port scanning, A port scanner will send a TCP (Transmission Control Protocol) or UDP (User Datagram Protocol) network packet and inquire the port about their status. The responses will either be: open, closed or blocked.

In using xmas scan, a loophole with the TCP RFC is used to differentiate between open and closed ports. This means that the Xmas scan in order to identify listening ports on a targeted system will send a specific packet; If the port is open on the target system then the packets will be ignored.

Learn more on port scanning from:

https://brainly.com/question/10536867?referrer=searchResults

#SPJ4

A functional policy declares an organization's management direction for security in such specific functional areas as remote access, email, and internet surfing and using. Hence the given statement in this question is True.

The functional policy defines the overall functional operation of the organization. The functional policy of an organization from the security perspective defines the management direction to access the system remotely, access email, and internet surfing. The main purpose of the functional policy regarding the security of the organization is to protect the organization's data and information, and protect the organization's employees' data while surfing the internet.

The complete question is given below

"

a functional policy declares an organization's management direction for security in such specific functional areas as email, remote access, and internet surfing.

True

False

"

You can learn more security policy of an organization at

https://brainly.com/question/5673688

#SPJ4

Answer: True

Explanation: Got it right on the test

If we want to write Python code to find the answer this question;

x=1

count=0

while(x!=1000):

   if(x%7==0):

       count+=1

       x+=1

   else:

       x+=1

       continue

print("There are ",count," numbers which divisible by 7.")

The output will be There are 142 numbers which divisible by 7.

Facilitate team development for successful project completion. Through coaching and mentoring, provide teammates with technical leadership.

Establishing best practices and habits will help the team maintain high standards for the quality of its software. Identify and promote the team's potential development and improvement areas.

#include<iostream>

using namespace std;

/*C++ Function to print leaders in an array */

void printLeaders(int arr[], int size)

{

  for (int i = 0; i < size; i++)

   {

       int j;

       for (j = i+1; j < size; j++)

       {

           if (arr[i] <=arr[j])

               break;

       }  

       if (j == size) // the loop didn't break

           cout << arr[i] << " ";

 }

}

/* Driver program to test above function */

int main()

{

   int arr[] = {16, 17, 4, 3, 5, 2};

   int n = sizeof(arr)/sizeof(arr[0]);

   printLeaders(arr, n);

   return 0;

}

Learn more about Development here-

https://brainly.com/question/28011228

#SPJ4

The measures you can take to secure the server and prevent it from getting compromised by a hacker are the use of option b, c and d:

The process of confirming a user's identification is called authentication. The process of deciding whether a user has access to a resource is known as authorization.

Secure or Discreet Firewall: A safe firewall configuration should forbid connections to systems and networks that are not trusted.

Bastion Hosts: What is allowed to run on Bastion hosts is restricted and carefully hardened. Bastion hosts are typically assumed to be exposed to the internet, thus extra care is taken to harden and lock them down to reduce the likelihood of compromise.

Then the Lists of access controls (ACLs). To secure sensitive services without compromising the convenience of the entire business, secure configurations, such ACLs, could be enabled on selected bastion hosts.

Learn more about core authentication from

https://brainly.com/question/17093485
#SPJ1

See options below

Decker service

Secure firewall

Access Control Lists (ACLs)

Bastion hosts

Answer:

Explanation:

B. Event

The Three windows cli commands and utilities that will provide the necessary information are ping, ipconfig and nslookup.

The ipconfig and nslookup commands will make the initial IP address and DNS configuration information availabe to the technicians while determining whether the DHCP is assigning correct information to the PCs. The ping utility on the other hand would be used in verifying whether, or not, the connectivity to the default gateway (router) using the configured default gateway address, or using the known correct default gateway address if these are found to be different.

Here's the complete question:

A group of Windows PCs in a new subnet has been added to an Ethernet network. When testing the connectivity, a technician finds that these PCs can access local network resources but not the Internet resources. To troubleshoot the problem, the technician wants to initially confirm the IP address and DNS configurations on the PCs, and also verify connectivity to the local router. Which three Windows CLI commands and utilities will provide the necessary information? (Choose three.)

a. netsh interface ipv6 show neighbor

b. arp -a

c. tracert

d. ping

e. ipconfig

f. nslookup

g. telnet

Learn more on Windows CLI command from:

https://brainly.com/question/13263568?referrer=searchResults

#SPJ4

Installing all of the Hyper-V components from Powershell is the workaround. In contrast to Windows Server 2012 Essentials (non-R2) edition, Windows Server 2012 R2 Essentials may operate a single instance of a virtual machine on Hyper V.

Hyper-V cannot be installed if an active hypervisor is present. When we attempt to install Hyper-V on a server that is already a virtual machine, this error happens. Itanium-based processors are not supported, and x64-based processors are the minimum CPU requirements for running Hyper-V. Hardware Data Execution Protection and hardware-assisted virtualization must also be turned on. A dual-core processor is not necessary at all. The Windows Server 2016 Standard or Datacenter Editions both support the installation of Hyper-V.

Learn more about Hyper V here-

https://brainly.com/question/14466010

#SPJ4

Answer:

Explanation:

e

The TCP transmit buffer is not cleaned if an ACK is lacking. This makes perfect sense given that the stack could need to relay the data again.

The next block of data cannot be put into the stack until an ACK is received if the amount of data in the TCP transmit buffer is larger than half the buffer size. The sender resends the same packet if the ACK does not get there before the timeout. Go-Back-N In the ARQ protocol, the sender constantly sends a certain number of packets (defined by the size of the transmission window) without waiting for the receiver to respond with an ACK signal. TCP has the ability to retransmit lost packets. The second transmission reconstructs the data stream by picking up dropped packets.

Learn more about data here-

https://brainly.com/question/10980404

#SPJ4

The chance that all components work in a computer set is 94.09%. This chance is calculated using binomial probability.

Binomial probability or known as binomial experiment can be described as the probability of exactly x successes on n repeated trials in an experiment which has two possible outcomes.

Step-by-step explanation:

Formula:

P(x) = ⁿCₓpˣ (1-p)ⁿ⁻ˣ

Desc:

P(x) =  the probability of getting success in x trials

n = number of trials

P = the probability of getting success

P ( x ≤ 1) = P(0) + P(1)

³C₀(0,03)⁰ (0,97)³ + C₁ (0,03)¹(0,97)² =  (0,97)³ + (0,03)¹(0,97)² = 0,9409 = 94,09%

Learn more about Binomial probability at https://brainly.com/question/13029978

#SPJ4

Hello, you should first install the library of PyTurtle. You can type in terminal if you've GNU/Linux.

And then, you can use this code. Good luck!

import turtle

# Defining instance of turtle

pen = turtle.Turtle()

wn = turtle.Screen()

#Initial position is setting

pen.penup()

pen.setposition(-275.0,-150.0)

pen.pendown()

#Red diamond shape

pen.color("red")

pen.left(60)

pen.forward(200)

pen.left(60)

pen.forward(200)

pen.left(120)

pen.forward(200)

pen.left(120)

pen.forward(200)

pen.right(120)

pen.forward(200)

pen.right(120)

pen.forward(200)

pen.right(120)

pen.forward(200)

#Go to draw circle

pen.color("white")

pen.right(90)

pen.forward(170)

pen.left(90)

pen.forward(175)

#Draw circle

pen.color("black")

pen.circle(175)

#Go to green diamond

pen.color("white")

pen.forward(175)

pen.left(90)

pen.forward(175)

pen.right(90)

#Draw green diamond

pen.color("green")

pen.forward(200)

pen.left(120)

pen.forward(200)

pen.left(120)

pen.forward(200)

pen.left(60)

pen.forward(200)

pen.left(120)

pen.forward(200)

pen.left(120)

pen.forward(200)

#Always-on-display

wn.mainloop()

Since Madison is configuring live migration within hyper-v manager for a server. the bandwidth on the server’s network is limited. the configuration that I could advise Madison to use is  Self-aligned barrier (SAB) configuration.

Software, hardware, or say both may be referred to as configuration. For instance, an average laptop PC configuration includes an operating system,8GB of main memory, and a hard drive or solid-state drive (SSD).

Note that Since the Cu/barrier interface adhesion is frequently regarded as the limiting element for the electromigration performance of Cu interconnects capped with dielectric barriers, self aligned barriers techniques are the subject of extensive research.

Learn more about configuration from

https://brainly.com/question/14307521
#SPJ1

The career that has the main task to install, maintain, and restore gadget used for communique is called The telecommunication.

Telecommunications, additionally referred to as telecom, approach the alternate of data over vast distances with the aid of using digital approach and refers to all kinds of voice, statistics and video transmission.

Telecommunication may be defined as communique at a distance the use of electric alerts or electromagnetic waves. Examples of telecommunications structures are the phone network, the radio broadcasting system, laptop networks and the Internet.

Learn more about the telecommunication at https://brainly.com/question/1622085

#SPJ4

Answer:

The Romans ate mainly with their fingers and so the food was cut into bite size pieces.

A table consists of rows and columns. Each column corresponds to an attribute of the entity referenced by the table. Each row represents an instance of the entity described by the database table.

The specific data associated with each attribute is stored in rows corresponding to each column. A database is a structured collection of information about various specific, well-defined types of entities. Entities generally have various specific types of relationships with each other. Each entity has a specific set of (unique) attributes of interest. An entity type typically corresponds to one or more related tables in your database. attribute. A characteristic of an entity type that describes the entity. For example, the Person entity type has a Date of Birth attribute.

Learn more about entity here-

https://brainly.com/question/14972782

#SPJ4