Where you are the network administrator for a consulting firm, and a website that users on your network visit has a habit of frequently changing its IP address. If when these IP mappings change, users are unable to connect until you clear the DNS cache, the settings that you ought to configure so that the cache does not need to be manually cleared every time is: Time to live (Option B)
What is a DNS Cache and why is it important?DNS cache is the temporary caching of information from earlier DNS lookups on a machine's operating system or web browser.
Keeping a local copy of a DNS query helps your operating system or browser to obtain it fast, allowing a website's URL to be resolved to its matching IP address much more effectively.
Learn more about DNS Cache:
https://brainly.com/question/29649483
#SPJ1
ion channels are always open and are responsible for the permeability of the plasma membrane to ions when the plasma membrane is unstimulated
False. Ion channels are usually closed and only open when stimulated by a signal such as a change in voltage or a chemical messenger.
The Role of Ion Channels in the Permeability of the Plasma MembraneIon channels play a critical role in controlling plasma membrane permeability.
Ion channels are transmembrane proteins that open and close to control the entry and exit of ions across the plasma membrane. These channels open when they receive an external signal, such as a change in voltage or a chemical messenger.
Ion channels allow selective passage of ions across the plasma membrane. This means that some types of ions can pass through the membrane while others cannot. This selectivity allows the cell to control the exchange of ions with the external environment. Ion channels are also responsible for the conduction of ions across the plasma membrane, which allows cells to transmit signals across the plasma membrane.
Learn more about Ion channels in the plasma membrane:
https://brainly.com/question/28543916
#SPJ4
a. a certain element has a phasor voltage of and current of the angular frequency is 500 rad/s. determine the nature and value of the element. b. repeat for and current of c. repeat for and current of
A)The element is a capacitor with a capacitance of 10F.
Since the phase angle between the voltage and current is 90 degrees, the element is a capacitor with a capacitance of
C = V/Iω
= 200∠30∘V / (4∠120∘A)(500 rad/s)
= 10∠−90∘F
= 10 F.
B) )The element is an inductor with an inductance(L) of 20 H.
Since the phase angle between the voltage and current is −90 degrees, the element is an inductor with an inductance of
L = V/Iω
= 40∠−45∘V / (4∠−135∘A)(500 rad/s)
= 20∠135∘H
= 20 H.
C) The element is a resistor with a resistance(R) of 1.75 Ω.
Since the phase angle between the voltage and current is 0 degrees, the element is a resistor with a resistance of
R = V/I
= 7∠45∘V / (4∠45∘A)
= 1.75 Ω.
For more questions like Capacitance click the link below:
https://brainly.com/question/14893729
#SPJ4
Complete question:
A) A certain element has a phasor voltage of V=200∠30∘V and current of I=4∠120∘A. The angular frequency is 500 rad/s. Determine the nature of the element.
Determine the value of the capacitance (C) .
Express your answer to three significant figures and include the appropriate units.
B) Repeat Part A for V=40∠−45∘V and current of I=4∠−135∘A.
Determine the value of the element( L) Industance.
Express your answer to three significant figures and include the appropriate units.
C) Repeat Part A for V=7∠45∘V and current of I=4∠45∘A.
Determine the value of the resistance .
Express your answer to three significant figures and include the appropriate units.
technician a says a faulty unlock relay could cause the power door locks to lock but not unlock the doors. technician b says a faulty actuator could cause this. who is correct?
According to the condition and information, technician A is correct and conveys that a faulty unlock relay could cause the power door locks to lock but not unlock the doors.
What is the Technician's responsibility?The technician's responsibility may be characterized as those features that include monitoring and servicing systems, diagnosing problems and troubleshooting equipment, running tests and completing reports, updating and improving existing systems, and repairing or replacing faulty equipment.
According to the context of this question, technicians install, troubleshoot, and fix the hardware and software in a computer system. With respect to the same ideology, the recommendation of technician A seems more accurate as compared to that of technician B.
Therefore, technician A is correct and conveys that a faulty unlock relay could cause the power door locks to lock but not unlock the doors.
To learn more about Technicians, refer to the link:
https://brainly.com/question/18428188
#SPJ1
When connecting a multiwire (3-wire) circuit to a single phase panel, one ungrounded conductor must be connected to the ____ phase and the other ungrounded conductor must be connected to the ____ phase.
The correct answer is multiwire branch circuit phase and the other ungrounded conductor must be connected .
According to NEC Article 100, a multiwire branch circuit is made up of two or more ungrounded conductors with a voltage between them and a grounded conductor connected to the neutral or grounded conductor of the system. This grounded conductor has an equal voltage between it and each ungrounded conductor in the circuit. Two 120V parallel circuits become one 240V series circuit if the grounded (neutral) line is opened. A connection that has many circuits using the same neutral is known as a shared neutral. The circuits and neutral together are frequently referred to as an Edison circuit. This is also known as a common neutral.
To learn more about multiwire branch circuit click the link below:
brainly.com/question/29081366
#SPJ4
x=5 and y=x++, find the value of y?
a building foundation made up of a base of poured concrete where finished flooring is installed on top of the cured concrete is best described as
The supporting load-bearing components of the structure will rest on footings that make up a slab on grade foundation. Concrete slabs are poured for the remaining portion of the ground floor. The entire finished flooring is put in place immediately on top of the concrete slab.
Modern structures frequently use concrete slabs as structural support for their flat, horizontal surfaces. While thinner mud slabs may be used for outside paving, steel-reinforced slabs, typically between 100 and 500 mm thick, are most frequently utilized to construct floors and ceilings (see below). The ground floor of many residential and commercial buildings is constructed from a large concrete slab that is either supported by foundations or rests directly on the subsoil. These slabs are often categorized as suspended or ground-bearing. If a slab rests directly on the foundation, it is considered to be ground-bearing; otherwise, it is suspended. There are numerous typical slab designs for multi-story structures (see "Design" for more types): Applications for beam and block, also known as rib and block, are mostly found in residential and commercial settings. Pre-stressed beams and hollow blocks make up this sort of slab, which is temporarily supported until it sets, usually after 21 days. A precast hollow core slab that is crane-installed on the job site. Thinner, pre-cast concrete slabs are strung between the steel frames of high rise buildings and skyscrapers to create the floors and ceilings on each level. Along with homes, high rise structures and sizable shopping centres also use cast in-situ slabs. Shutters and reinforced steel are used to cast these in-situ slabs on the spot.
Learn more about Concrete slabs here
https://brainly.com/question/23421328
#SPJ4
the advantage of routine patch cycles is that they allow for thorough review of the patch and testing cycles before deployment.
The benefit of having routine patch cycles is that they enable a thorough review of the patch and testing cycles before deployment. Thus, this is said to be a true statement.
The patch cycle is the mechanism of distributing and applying updates to software and application. These patches are often important to correct errors or bugs in the software. It is considered a good practice that patches should be applied every thirty days from their release. The advantage of having routine patch cycles is that they enable a thorough review of the patch and testing cycles before the deployment of the software. Therefore, the given statement reflects to be true.
"
Complete question is:
the advantage of routine patch cycles is that they allow for thorough review of the patch and testing cycles before deployment.
True
False
"
You can learn more about patch at
https://brainly.com/question/1090549
#SPJ4
genetic algorithms are use learned knowledge to perform specific tasks unselected used to substitute for human movements unselected based loosely on evolutionary natural selection and mutation unselected systems that can view and extract informatin from images
The genetic algorithm, which is based on natural selection, the mechanism that propels biological evolution, is a technique for resolving both limited and unconstrained optimization issues. A population of unique solutions is repeatedly modified by the genetic algorithm.
A genetic algorithm (GA), which is a subclass of the larger class of evolutionary algorithms in computer science and operations research, is a metaheuristic that takes its cues from the process of natural selection (EA). Genetic algorithms frequently employ biologically inspired operators including mutation, crossover, and selection to produce high-quality solutions to optimization and search issues. Solving sudoku puzzles, hyperparameter optimization, and performance-enhancing decision trees are a few examples of GA applications. To solve complex issues with a greater number of variables and potential outcomes/solutions, a genetic algorithm is used. To select the best answers, combinations of several solutions are run through a Darwinian-based algorithm. The poorer solutions are then replaced with the offspring of good solutions.
Learn more about genetic algorithm here
https://brainly.com/question/28566003
#SPJ4
technician a says information from the wheel speed sensors is available to other control modules on the can network. technician b says wheel speed sensors are ac generator-type sensors. who is correct?
The both technician is correct to their statement about wheel speed sensors.
What is wheel speed sensors?Wheel speed sensors is a tool to measure the vehicle's wheel rotation speed, it is a part of tachometer type. The wheel speed sensors is magnetic and generate ac signal.
CAN network or controller area network is purposed to networking intelligent devices with system of high-integrity serial bus. CAN network can be find usually in automotive components and industrial system.
Since, CAN network is to networking intelligent devices with serial bus, it can provide information from wheel speed to other control modules.
Learn more about wheel speed sensors here:
brainly.com/question/29306943
#SPJ4
In using the bolt cutter shown, a worker applies two 300-N forces to the handles. Determine the magnitude of the forces exerted by the cutter on the bolt.
The bolt cutter is exerting a force of -600 N on the bolt. The negative sign indicates that the direction of this force is opposite to that of the forces applied to the handles.
To determine the magnitude of the forces exerted by the bolt cutter on the bolt, we need to use the principle of static equilibrium. This principle states that the sum of the forces acting on an object must be zero in order for the object to be in static equilibrium.
In this case, the forces acting on the bolt are the two 300 N forces applied to the handles of the bolt cutter, and the force exerted by the bolt cutter on the bolt. Let's call this force F. We can represent this situation with the following equation:
F + 2(300 N) = 0
Solving for F, we get:
F = -600 N
Learn more about static equilibrium, here https://brainly.com/question/29316883
#SPJ4
four-cylinder two-stroke 2.4-L diesel engine that operates on an ideal Diesel cycle has a compression ratio of 22 and a cutoff ratio of 1.8. Air is at 70oC and 97 kPa at the beginning of the compression process. Using the cold-air standard assumptions, determine how much power the engine will deliver at 3500 rpm
The power that the engine will deliver at 3500 rpm is; 87.61 kJ/s
What is the power delivered to the Engine?We are given;
Compression Ratio; V₁/V₂ = 22
Cut off ratio; V₃/V₂ = 1.8
Speed; N = 3500 rpm
The temperature after the compression is given by the formula;
T₂ = T₁(V₁/V₂)^(λ - 1)
Where;
T₁ is the temperature before compression
V₁ is the volume before compression
V₂ is the volume after compression
λ is the adiabatic constant of air = 1.4
We are given;
T₁ = 70°C = 70 + 273 = 343 K
Thus;
T₂ = T₁(22)^(1.4 - 1)
T₂ = 1181.03 K
The temperature after the constant pressure expansion in diesel cycle is given by the formula;
T₃/T₂ = V₃/V₂
Plugging in the relevant values;
T₃ = 1181.03 * 1.8
T₃ = 2125.854 K
The temperature T₄ after the isentropic expansion of air is given by the formula;
T₄ = T₃(V₃/V₄)^(λ - 1)
Plugging in the relevant values gives;
T₄ = T₃(1.8V₂/V₄)^(λ - 1)
where V₂/V₄ = V₂/V₁
Thus;
T₄ = T₃(1.8V₂/V₁)^(λ - 1)
T₄ = 2125.854(1.8/22)^(1.4 - 1)
T₄ = 781 K
The mass of air in the system is given by;
m = P₁V₁/RT₁
Where P₁ = 97 KPa and R is gas constant = 0.287kPa⋅m³/kg⋅K
Plugging other relevant values and solving gives;
m = 0.00236 kg
The ideal the specific heat of air at constant pressure cp using ideal gas properties table and by interpolation here is cp = 1.0076 kJ/kg.K
The heat added to the cycle is given by the formula;
Q_in = mcp(T₃ - T₂)
Plugging the relevant values and solving gives;
Q_in = 2.246 kJ
The heat rejected by the cycle is given by the formula;
Q_out = mcv(T₄ - T₁)
cv is the specific heat at constant volume and from ideal gas properties table and by interpolation gives cv = 0.7205 kJ/kg.K
Thus;
Q_out = 0.00236 * 0.7205(781 - 343)
Q_out = 0.744 KJ
Thus, power that the engine will deliver at 3500 rpm is;
W' = N(Q_in - Q_out)
Where N = 3500 rpm = 3500/60 rps
Thus;
W' = (3500/60)(2.246 - 0.744)
W' = 87.61 kJ/s
Read more about power delivered at; https://brainly.com/question/19213954
#SPJ1
Darwin has purchased a laptop for the purpose of running his stock brokerage activities from home. He has contracted Navin, a network engineer, to install a software specifically for his workstation so that the software can protect the network from certain traffic. Analyze which of the following firewalls is best applicable in this scenario.
a. A host-based firewall
b. An HIDS
c. A network-based firewall
d. A proxy server
Answer:
d. A proxy server d. A proxy serverd. A proxy server
Explanation:
d. A proxy server
A load P is supported by a structure consisting of rigid bar ABC, two identical solid aluminum alloy [E = 73 GPa] rods (1), and a solid bronze [E = 105 GPa] rod (2), as shown in Figure P5.23. The aluminum rods (1) each have a diameter of 12 mm and a length of L_1 = 2.3 m. They are symmetrically positioned relative to middle rod (2) and the applied load P. Bronze rod (2) has a diameter of 18 mm and a length of L_2 = 1.6 m. If all bars are unstressed before the load P is applied, determine the normal stresses in the aluminum and bronze rods after a load of P = 50 kN is applied to the rigid bar.
In machining, welding, and structural applications, aluminum bars, rods, and discs are utilized to create and build parts because they are strong, lightweight, and corrosion-resistant.
These days, engine manufacturers are attempting to maintain the excess mass at the bottom of the rod and remove more weight from the piston; for this reason, an aluminum rod is advantageous. They are nonetheless stronger for their weight than steel rods since there is a lot more substance at the bottom, according to Antony. The well-known properties of aluminum make the process of bending it quite simple. Aluminum is a soft, ductile, malleable, and light metal in its highest purity forms. These characteristics enable aluminum to be bent without running the risk of breaking or developing fractures. A useful metal that is lightweight, corrosion-resistant, and simple to produce is the aluminum alloy rod.
To learn more about aluminum rods click the link below:
brainly.com/question/13862183
#SPJ4
Which method is used by a PAT-enabled router to send incoming packets to the correct inside hosts? It uses the source TCP or UDP port number on the incoming packet. It uses a combination of the source TCP or UDP port number and the destination IP address on the incoming packet. It uses the destination TCP or UDP port number on the incoming packet. It uses the source IP address on the incoming packet
How a PAT-enabled router sends incoming packets to the correct inside hosts:
It uses a combination of the source TCP or UDP port number and the destination IP address on the incoming packet.Routing Incoming Packets Using PAT-Enabled RoutersThe PAT-enabled router uses a combination of the source TCP or UDP port number and the destination IP address on the incoming packet to send the packet to the correct inside host.
This method is beneficial because it allows the router to identify the right host by matching the source port number and the destination IP address, while also allowing multiple connections to the same IP address to be established. This allows the router to send data to the correct inside host, even if the hosts have the same IP address.
Learn more about Router: https://brainly.com/question/14364696
#SPJ4
what ancient civilization is most associated with innovations in plumbing and sewage systems?
in strip mining situations, miners remove a large volume of material, extract the resource, and return the unwanted waste material, also known as
In strip mining situations, miners remove a large volume of material, extract the resource, and return the unwanted waste material, also known as mining spoils or tailings.
What is meant by strip?The process of strip mining involves removing minerals along very long, very narrow strips.The Appalachian Mountains and neighboring areas, the Central Plains from Indiana and Illinois through Oklahoma, and new sub-bituminous coal mines in North Dakota, Wyoming, and Montana have seen the most of its use.Surface mining, also referred to as "strip mining," has the potential to severely degrade the soil or impair its fertility, pollute rivers or deplete underground water supplies, scar or desecrate the environment, harm residences, other structures, and roadways, and obliterate wildlife.After using explosives to shatter any overlying rock, heavy gear is utilized to remove the overburden and place it in a nearby area.To learn more about strip refer to:
https://brainly.com/question/29845779
#SPJ4
FILL IN THE BLANK pigment names are often derived from their source. for example the pigment that we call umber is named after________ question 1 options: a zinc extraction process the stone lapis lazuli the brown soil of umbria, italy the red soil of afghanistan none of the other answers
The correct option is c. Umbria, Italy. Pigment names are often derived from their source. For example the pigment that we call umber is named after Umbria, Italy.
A coloured substance that is entirely or almost entirely insoluble in water is called a pigment. Contrarily, dyes are usually soluble, at least initially, during their use. In general, pigments are frequently inorganic substances while dyes are frequently organic molecules. Umbers, ochres, and siennas are examples of naturally occurring inorganic pigments since they are extracted from the earth. The same names of pigments are also made synthetically. Titanium white, cobalt blue, and cadmium yellow/orange/red are more examples of manufactured inorganic pigments. Materials are given colour by adding pigments, which are chemicals. Through art, fashion, computer displays, and even health, this seemingly straightforward application has influenced how we see the world. Paints, inks, plastics, textiles, cosmetics, and food all include pigments.
Learn more about Pigment here
https://brainly.com/question/1056549
#SPJ4
Pigment names are often derived from their source. For example the pigment that we call umber is named after ______.
a. a zinc extraction process
b. the stone lapis lazuli
c. Umbria, Italy
d. Afghanistan
e. none of these
while erp systems offer many competitive advantages to users, particularly those in upper management, a significant disadvantage is their
ERP software's high prices, complexity, lengthy deployment, and data migration are some of its main drawbacks. Purchasing a P2P solution with ERP system integration is the ideal option if you want your procurement process to be as effective as possible.
What is ERP ?Accounting, purchasing, project management, risk management and compliance, and supply chain management are just a few of the everyday business tasks that are managed by firms using enterprise resource planning (ERP) software.ERP systems can operate with a variety of deployment model options and fall into one of three primary categories. The three types of ERP systems that are most frequently used are hybrid, on-premise, and cloud-based.By automating tasks and minimizing human labor, an ERP system is designed to increase the effectiveness of all company activities.Users can automate laborious daily chores with the help of ERP packages like Netsuite, SYSPRO, and Epicor. Rather of wasting time each day on routine tasks or obtaining reports from many systemsTo learn about erp refer to:
brainly.com/question/15685153
#SPJ1
Assuming x is 5, y is 6, and z is 8, which of the following is false?
1. x == 5;
2. 7
3. z < = 4;
4. (1 + x) != y;
5. z >= 8;
6. x >= 0;
7. x
Select one:
a. 3 and 4 are false.
b. 3, 4, 6, 7 are false.
c. Only 5 is false.
d. All are false.
e. None of these
d. All are false.
Explanation:
It seems option d. all are false.
technician a says that the multimeter is connected in series with the circuit or component to measure the voltage dropped by the circuit resistance. technician b says that the ohmmeter works well in testing semiconductors. who is correct?
The multimeter is linked in series with the circuit or component to measure the voltage dropped by the circuit resistance, which technician an is accurate to state is the case.
When a multimeter is linked in series with an electrical circuit, what may be measured?A multimeter needs to be connected in series with a circuit in order to measure current. See the example below. Placing the dial of the meter at the highest current range (or the 10A range if the probe is in the 10A socket).
How can the resistance of a resistor be measured using a digital multimeter?Select any resistor at random, and then set the multimeter to the 20k preset. Next, apply the same pressure you would use to push a key on a keyboard to the probes against the resistor legs. One of three values—0.00, 1, or the actual resistor value—will be displayed by the meter.
To know more about multimeter visit:-
https://brainly.com/question/29442319
#SPJ1
the repetition structures we have discussed this week can be used interchangeably; however, there are a few occasions when one is clearly preferable to another. discuss, in detail as well as illustrate with an example, how to determine which structure to use when there is no clear indication. additionally, how much of the choice should be based on personal preference and how much on conventional practices?
When a program needs to process one or more instructions repeatedly until a condition is met, at which point the loop stops, repetition structures, sometimes known as loops, are utilized. Numerous programming tasks are monotonous and rarely differ from one another.
When a program needs to process one or more instructions repeatedly until a condition is met, at which point the loop stops, repetition structures, sometimes known as loops, are utilized. Numerous programming tasks are monotonous and rarely differ from one another. Repetitive control structures, also known as iterative structures, are collections of code created to repeatedly execute a group of connected statements. This repetition (or iteration) can happen zero or more times before it stops due to a control value or other condition. As long as a condition (known as the loop-continuation condition) is true, programs can execute statements repeatedly using Java's three repetition statements, also known as iteration statements or looping statements. The while, do... while, for, and enhanced for statements are repetition statements.
Learn more about repetition structures here
https://brainly.com/question/13136131
#SPJ4
how can the direction of rotation of a dc motor be reversed?... describe one application of a motor where this feature is important
A DC motor's direction of rotation can be changed by switching the connections between the supply and the armature or the field winding.
How can we reverse the direction of rotation of a DC motor?Accordingly, we can simply reverse the voltage to alter the direction of current flow, which will cause the force to rotate 180 degrees and push the motor in the other way.that we may improve the motor torque by adjusting the commutator's location in relation to the armature windings. Commutator advancement is a method that aids in improving motor function.The direction of rotation would be reversed if the motor's current flow was in the other direction.The polarity of a wire's faces also reverses when the direction of the current in the wire does. Consequently, it likewise produces a magnetic field in the opposite direction.Learn more about DC motor's direction of rotation refer to :
https://brainly.com/question/17193560
#SPJ4
fill in the blank: a formula is a set of instructions used to perform a specified calculation; whereas a function is_____
A formula is defined as a set of instructions used to perform a particular calculation; whereas a function is a predefined operation.
In the context of the Excel sheet, a formula refers to a statement that performs a specified calculation. On the other hand, a function is a type of formula which is predefined. It is permitted to perform any type of operation with a formula as per need to calculate a value. In the case of a function, customization is not allowed; the function only performs a pre-existent operation.
Thus, the formula is defined to be a set of instructions to be used to perform any specified calculation; while a function refers to a predefined operation.
You can learn more about function and formula at
https://brainly.com/question/27927845
#SPJ4
nickel additions to low-carbon steel increase the ductile-to-brittle transition temperature to very high temperatures.
According to this finding, low-carbon steels with grain sizes of 6.3 mm or more show complete brittle fracture even at 196 °C, while those with grain sizes of 4.3 mm or less show complete ductile fracture.
A notched bar is broken in a pendulum-style impact tester to determine the ductile/brittle transition temperature for every specific steel sample. The energy absorbed during the fracture is then calculated. Steel 1045 specimens break apart when the temperature drops below zero and display brittle-like fracture (specimens 1 to 4 from -200oC to 0.0oC), however when the temperature rises, the specimens display ductile-like fracture (specimens 5 to 7 from 24oC to 100oC). Mild steel is malleable and ductile because it contains between 0.05 and 0.30 percent carbon. This steel has low carbon, with a carbon concentration of about 0.3%, making it neither overly brittle nor overly ductile. It is utilized practically everywhere since it is in the middle, which strikes a good balance.
Learn more about brittle here
https://brainly.com/question/29860308
#SPJ4
select below the type of cluster where standby server exists only to take over for another server in the event of its failure.
Asymmetric Server, There are numerous pathways for both incoming and outgoing network traffic in an asymmetric network.
Asymmetric communications include things like Asymmetric Digital Subscriber Line (ADSL). On existing phone lines, ADSL technology sends digital data at a high bandwidth. Because asymmetric cryptography employs two different keys—a public key that is only ever used to encrypt messages, making it safe for anyone to possess, and a private key that is only ever used to decrypt messages and is never shared—it provides stronger security. Natural forms frequently exhibit asymmetry: you are likely right- or left-handed; fiddler crabs have variously sized claws; tree branches develop in various directions; clouds have a variety of shapes. Asymmetry tends to be more fascinating than symmetry because it fosters more intricate interactions between parts.
Learn more about primitive-type variables here
https://brainly.com/question/27900879
#SPJ4
In iOS and Android, what’ the firt thing you hould try when troublehooting a mibehaving app? 1. Check for an app that i uing a lot of battery. 2. Cloe app, one at a time, tarting with the leat recently ued app. 3. Cloe app, one at a time, tarting with the foreground app. 4. Unintall app, one at a time, tarting with the leat recently ued app
Take care of bothersome problems and restore any phone to peak condition with these simple, professional-recommended fixes.
Just keep in mind this cute little proverb when you notice that your phone's storage is beginning to run low: "Stop hoarding stuff, you unruly digital packrat." It might not have been as catchy as I had planned, but still.
Since cloud syncing and automated administration are both straightforward on Android, the most of us today really don't require anything stored locally on our devices. Install the Photos app first, then configure it to automatically backup all pictures and videos as they are being taken. That will enable you to delete the local copies and give you a terrific way to access all of your memories from any device, at any time, even if you misplace or damage your current Android phone.
Know more about configure here:
https://brainly.com/question/13410673
#SPJ4
What impact area are extremely dangerou due to the enitivity of the dud contained within their boundarie?
impact area are extremely dangerous due to the enitivity of the dud contained within their boundaries is high hazard.
What is high hazard?A region with a high risk of flooding that stretches from the coast to the interior limit of a primary frontal dune along an open coast, as well as any other region vulnerable to high-velocity wave action from storms or seismic sources.If a structure or area is used to store, produce, or process potentially explosive goods or materials, or goods or materials that are highly flammable or combustible and likely to burn extremely quickly, it must be assigned to the high hazard occupancy group.With a "injury and sickness rate less than the national private-industry average of 1.6 per 100 full-time workers," according to OSHA, a sector is considered low-hazard. Even those fields that are thought to be low-hazard industries are susceptible to work-related accidents.A source or circumstance that has the potential to cause harm to people or the environment, damage to property, or any combination of these is referred to as a hazard.
To learn more about high hazard refer to:
https://brainly.com/question/17483083
#SPJ4
if a 120v feeder for nonmotor loads feeds a continuous load rated at 20a and a noncontinuous load at 25a, what size overcurrent protective device should be selected?
The size overcurrent protective device that should be selected in this case is 50A.
What is an overcurrent protective device?An overcurrent protective device may be characterized as a piece of electrical equipment that is used to protect service, feeder, and branch circuits and equipment. These devices include circuit breakers and fuses.
According to the context of this question, overcurrent protection devices are to be sized no less than 125% of the continuous load, plus 100% of the noncontinuous load. But in this question, only 50 A of OCPD is used for nonmotor loads feeds a continuous load rated at 20A and a noncontinuous load at 25A.
Therefore, the size overcurrent protective device that should be selected in this case is 50A.
To learn more about Overcurrent protective device, refer to the link:
https://brainly.com/question/28275759
#SPJ1
The frames of ranges, wall-mounted ovens, counter-mounted cooking units, and clothes dryers under the conditions permitted for existing installations, ___ permitted to be connected to the grounded circuit conductor.
Select one:
a. shall not be
b. can not
c. may be
d. shall be
The correct answer is a. shall not be permitted to be connected to the grounded circuit conductor.
It is forbidden to utilise a building or structure's structural metal frame as a conductor for equipment grounding. One of the following may be the conductor for the common grounding electrode: a conductor with a wire diameter of no less than 250 kcmil or 3/0 AWG for aluminium. Permanently wired use equipment and receptacles must be grounded using an equipment grounding conductor that is routed along with the circuit wires and linked to an equipment grounding bus in the branch-circuit panelboard that is clearly marked "Technical Equipment Ground." In patient care facilities, the equipment grounding conductor must be readily identifiable along its entire length by green insulation with one or more yellow stripes that link to the equipment grounding terminals of isolated ground receptacles.
To learn more about circuit click the link below:
brainly.com/question/27206933
#SPJ4
The vibration is the vertical direction of an airplane and its wings can be modeled as a three-degree-of-freedom system with one mass corresponding to the right wing, one mass for the left wing, and one mass for the fuselage. The stiffness connecting the three masses corresponds to that of the wing and is a function of the modulus E of the wing.
3 -3 0x0 2 RER 0 0 11 -3311X1110
a) The model is given in Figure P4. Calculate the natural frequencies and mode shapes. Plot the mode shapes and interpret them according to the airplane's deflection.
b) Consider the airplane of Figure P4 with modal damping of with 0.1 in each mode. Suppose that the airplane hits a gust of wind, which applies an impulse of 3?(t) at the end of the left wing and ?(t) at the end of the right wing. Calculate the resulting vibration of the cabin [??2(??)].
c) Consider again the airplane of Figure P4 with 10% modal damping in each mode. Suppose that this is a propeller-driven airplane with an internal combustion engine mounted in the nose. At a cruising speed the engine mounts transmit an applied force to the cabin mass (4m at ??2) which is harmonic of the form 50??????10??. Calculate the effect of this harmonic disturbance at the nose and on the wind tips after subtracting out the translational or rigid motion.
The effect of the harmonic disturbance can be determined.
What is frequencies?
Frequencies refer to the number of occurrences of a repeating event per unit time. It is commonly used when discussing sound and electromagnetic radiation, such as radio and light waves. In these cases, frequency describes the number of wave cycles per second, measured in hertz (Hz). It is also used to describe the number of occurrences of a particular event within a given time frame. For example, a frequency chart may show the number of times a certain type of crime occurred in a given month or year.
The natural frequencies and mode shapes of the three-degree-of-freedom system with one mass corresponding to the right wing, one mass for the left wing, and one mass for the fuselage can be calculated by solving the eigenvalue equation for the system. The mode shapes are the eigenvectors of the system and represent the relative displacement of the three masses for each mode. The mode shapes can be plotted to show the deflection of the wings and fuselage in response to the applied force or displacement.
To calculate the resulting vibration of the cabin, the impulse response of the system needs to be calculated with modal damping of 0.1 in each mode. This can be done by solving the differential equation describing the system and applying the impulse force at the ends of the left and right wings. The resulting vibration of the cabin can be found by solving the resulting equation.
To calculate the effect of the harmonic disturbance on the cabin and wing tips, the response of the system needs to be calculated with 10% modal damping in each mode. This can be done by solving the differential equation describing the system and applying the harmonic force at the cabin mass. The resulting vibration of the cabin and wing tips can be found by solving the resulting equation. After subtracting out the translational or rigid motion, the effect of the harmonic disturbance can be determined.
To learn more about frequencies
https://brainly.com/question/21086961
#SPJ4