You are riding in the passenger seat of a car as it goes around a tight turn. You slide across the seat to the passenger side door. Which statement below properly describes what happens? a. You are exerting a centripetal force on the car door. b. The door is exerting a centripetal force on you that balances the centrifugal force of the turn. c. The car seat is exerting a centripetal force on you, but not enough to keep you in place. d. The turn exerts a centrifugal force on you that throws you out toward the door. 2. An object is moving in a circle at a constant speed. From this you can be certain that a. There is at least one force acting on the object. b. There is no net force acting on the object. c. There are at least two forces acting on the object, which balance each other. d. There are at least two forces acting on the object, which do not balance each other. e. There must be more than two forces acting on the object.

Answer:

1.35 A

Explanation:

Applying,

V = IR

I = V/R..................... Equation 1

I = Current, V = Voltage, R = Resistance.

But,

R = Lρ/A............... Equation 2

Where L = Length of the wire, ρ = resistivity, A = Cross-sectional area of the wire.

Sustitute equation 2 into equation 1

V = AV/Lρ............... Equation 3

From the question,

Given: V = 0.7 V, A = 0.290 mm² = 2.9×10⁻⁷ m², L = 1.5 m, ρ = 10×10⁻⁸ Ω.m

Substitute these values into equation 3

I = (0.7× 2.9×10⁻⁷)/(1.5× 10×10⁻⁸ )

I = (2.03×10⁻⁷)/(15×10⁻⁸)

I = 1.35 A

Answer:

I think it's C. Long root systems to reach water deep underground.

Answer:

C

stilt roots provide extra support

Answer:

statement 1 is correct

2 not sure

Explanation:

Answer:

B) It accelerated for 0.25s

Explanation:

Given the following data;

Acceleration = 20 m/s²

Final velocity, v = 5 m/s

Initial velocity, u = 0 m/s

To find the time, we would use the first equation of motion;

V = u + at

Substituting into the formula, we have;

5 = 0 + 20t

5 = 20t

Time, t = 5/20

Time, t = 0.25 seconds

Answer:

Yes, I agree with rich

Explanation:

Yes I agree with rich.

Thus is because;

The electromagnetic process is what will determine how electromagnetic radiation will be emitted. Now, the mode of travel of electromagnetic energy is in the form of waves and then the wavelength of these waves is what will enable us know the form of energy. This includes light, x-rays, gamma rays e.t.c. This means that light and the others are just parts of the spectrum emitted and are called photons.

Thus, light can be said to be electromagnetic radiation.

I can agree with Rich that light is the same as electromagnetic radiation since the two terms can conveniently be used interchangeably.

Light has become a generic term that is used to describe all electromagnetic waves. All the waves in the electromagnetic spectrum have different frequencies and wavelengths but they are travel at the same speed which has been designated as "speed of light".

Therefore, i can agree with Rich that light is the same as electromagnetic radiation since the two terms can conveniently be used interchangeably.

Learn more: https://brainly.com/question/865531?

Answer:

Explanation:

The classification will be made into 3 categories, which are

Ones that shortens wavelengths

Ones that lengthens wavelengths

Ones that has no effect on wavelengths

Shortens wavelengths -> Increase frequency

Lengthens wavelengths -> Decrease frequency

No effect -> Increase amplitude, decrease amplitude, increase damping, decrease damping.

Answer:

80m/s2

Explanation:

a = v-u/ t

=>a = 0- 400/ 5

= -400/5

= -80m/s2

v- sign is negligible

This is my alt account just grinding points

Answer:

A

Explanation:

Answer:

what the heck is sakurfa

Explanation:

Answer:

F = -319.2 N

Explanation:

Given that,

The mass of a bicyclist, m = 70 kg

Mass of the bicycle = 9.8 kg

The speed of a bicycle, v = 16 m/s

We need to find the magnitude of the braking force of the bicycle come to rest in 4.0 m.

The braking force is given by :

[tex]F=ma\\\\=\dfrac{m(v-u)}{t}\\\\=\dfrac{(70+9.8)(0-16)}{4}\\\\=-319.2\ N[/tex]

So, the required force is 319.2 N.

Answer:

Frictional Force

Explanation:

i think so

: In general, metals feel colder or hotter to the touch than other materials at the same temperature because they're good thermal conductors. This means they easily transfer heat to colder objects or absorb heat from warmer objects

It is because the metal conducted heat faster than it feels colder than the wood, which conducted heat slower. Even tho they are similar temperatures. The metal will feel colder than the wood because of the thermal conductivity of the metal, compared to the wood.  

Answer:

a body which was thrown in space ,moves under the influence of gravity only is defined as projectile.

Answer:

hope it is you

Answer:

Truck [tex]\dfrac{g}{10}[/tex]

Road [tex]-\dfrac{g}{10}[/tex]

Explanation:

[tex]a_1[/tex] = Acceleration of truck = [tex]-\dfrac{g}{2}[/tex]

[tex]\mu[/tex] = Coefficient of friction = [tex]\dfrac{2}{5}[/tex]

Frictional force is given by

[tex]f=-\mu mg\\\Rightarrow f=-\dfrac{2}{5}mg\\\Rightarrow ma_2=-\dfrac{2}{5}mg\\\Rightarrow a_2=-\dfrac{2}{5}g[/tex]

Net acceleration is given by

[tex]a=a_2-a_1\\\Rightarrow a=-\dfrac{2}{5}g+\dfrac{g}{2}\\\Rightarrow a=\dfrac{g}{10}[/tex]

The acceleration of the box relative to the truck is [tex]\dfrac{g}{10}[/tex] and [tex]-\dfrac{g}{10}[/tex] relative to the road.

Answer:

carbon dioxide plus water in the presence of energy from light, results in glucose plus oxygen

The process is like carbon dioxide plus water in the presence of sunlight result in glucose plus oxygen.

Photosynthesis is a process that plants and other organisms use to convert light energy into chemical energy that can then be released to fuel the organism's activities via cellular respiration.

Photosynthesis is important because it is the process by which plants convert carbon dioxide into oxygen using sunlight. Animals require oxygen to survive, and plants serve as nature's air filter, filtering out harmful carbon dioxide.

Photosynthesis is the conversion of light energy by phototrophs into chemical energy, which is then used to power cellular activities. Sugars, which are formed from water and carbon dioxide, are used to store chemical energy.

The process of photosynthesis includes:

[tex]6CO_2+6H_2O \frac{Sunlight}{chlorophyll} > C_6H_1_2O_6+6O_2[/tex]

Thus, this is the basic process of photosynthesis.

For more details regarding photosynthesis, visit:

https://brainly.com/question/1388366

#SPJ2

Answer:

i beilieve that the answer is a transverse wave and a longitudinal wave

Explanation:

i dont really have an explanation

The two waves combine to form the surface wave will be the transverse wave and the longitudinal waves.

Surface waves are generated from the point of the earthquake inside the earth. There are generally three types of waves are generated primary, secondary, and surface waves.

Now this surface wave is the slowest wave which reach to the surface of earth very slowly and is the most destructive wave.

The surface waves travel both in the vertical as the well horizontal direction along their direction of flow.

An example of surface waves is the car park in the parking that goes up down just like the waves in the oceans.

Thus the two waves combine to form the surface wave will be the transverse wave and the longitudinal waves.

To know more about surface waves follow

https://brainly.com/question/16948312

[tex]V_{f2} =0.29 \dfrac{m}{s}[/tex] :Speed of the block immediately after the collision.

From elastic collision theory.

Momentum of a body is given as

[tex]P=m\times v[/tex]

where

p:Linear momentum

m: mass

v:velocity

There are 3 cases of collisions : elastic, inelastic and plastic.

For elastic collision the change in momentum remains constant

[tex]P_{i} =P_{f}[/tex]

Nomenclature and data

m₁: ball mass= 5.21 g= 5.21*10⁻³kg

V₀₁: initial ball speed,  =412 m/s

[tex]V_{f1}[/tex]: final ball speed

m₂: block mass =  14.8 kg  

V₀₂: initial block speed, = 0

[tex]V_{f2}[/tex]: final block speed

We apply furmula

[tex]P_{i} =P_{f}[/tex]

m₁[tex]\times[/tex]V₀₁+m₂[tex]\times[/tex]V₀₂=m₁[tex]\times[/tex]Vf₁+m₂[tex]\times[/tex]Vf₂

5.21[tex]\times[/tex]10⁻³[tex]\times[/tex]412+14.8[tex]\times[/tex]0= 5.21[tex]\times[/tex]10⁻³[tex]\times[/tex]Vf₁+14.8[tex]\times[/tex]Vf₂

2.15= 5.21*10⁻³[tex]\times[/tex]Vf₁+14.8[tex]\times[/tex]Vf₂ Equation (1)

For perfectly elastic collision the coefficient of elastic restitution (e) is equal to 1, and e is defined like this:

[tex]e=\dfrac{v_{f2-V_{f1} } }{v_{01-V_{ 02} } }[/tex]

1*(V₀₁-V₀₂) =Vf₂-Vf₁  , V₀₂=0, V₀₁ =412 m/s

412=Vf₂-Vf₁

Vf₁=Vf₂-412 Equation (2)

We replace Equation (2) in Equation (1)

2.15= 5.21[tex]\times[/tex]10⁻³(Vf₂-412)+14.8[tex]\times[/tex]Vf₂

2.15= 5.21[tex]\times[/tex]10⁻³*Vf₂-2.15+14.8*Vf₂

4.3=14.805Vf₂

[tex]Vf_{2} =\dfrac{4.3}{14.805} =0.29 \dfrac{m}{s}[/tex]: (+) ,with equal direction  of the movement of the ball before the collision.

Hence    [tex]V_{f2} =0.29 \dfrac{m}{s}[/tex]   Speed of the block immediately after the collision.

To know more about collisions follow

https://brainly.com/question/7694106

Answer:

kindness

Explanation:

Answer:

heavy molecules are pumped much more efficiently than light molecules. Most gases are heavy enough to be well pumped but it is difficult to pump hydrogen and helium efficiently.

Answer:

a= 4.4×10 m/s^2

Explanation:

pressure P  = E/c

Where, E = 100 W/m^2 intensity of light

c= speed of light  = 3×10^8 m/s

P = 1000/ 3×10^8

P = 3.33×10^(-6) Pa

Force F = P×A

F = 3.33×10^{-6}×6.65×10(-29)

= 2.22×10^{-6}

acceleration a  = F/m = 2.22×10^{-6}/ 5.10×10^{-27}

a= 4.4×10 m/s^2

Answer:

[tex]4.12\times 10^{-5}\ J[/tex].

Explanation:

Given that,

Capacitance, [tex]C=1.4\times 10^{-7}\ F[/tex]

Charge stored in the capacitor, [tex]Q=3.4\times 10^{-6}\ C[/tex]

We need to find the electric potential energy stored in the capacitor. The formula for the electric potential energy stored in the capacitor is given by :

[tex]E=\dfrac{Q^2}{2C}[/tex]

Put all the values,

[tex]E=\dfrac{(3.4\times 10^{-6})^2}{2\times 1.4\times 10^{-7}}\\\\=4.12\times 10^{-5}\ J[/tex]

So, the required electric potential eenergy is equal to [tex]4.12\times 10^{-5}\ J[/tex].

Answer:

convex lens:converging lens

focal length:positive

magnification; positive

concave lens:diverging lend

focal length:negative

magnification :negative

types:concavoconcave,planoconcave

A convex lens or converging lens focuses the light rays to a specific point whereas a concave lens or diverging lens diverges the light rays. A lens is a transparent material (either curved or flat surface) based on the principles of refraction. Concave lenses and convex lenses are often used together which is known as the Concave – Convex lens. When these lenses are combined, they produce sharper images. Most of the eyeglass lenses use combinations of convex and concave lenses. Cameras, telescopes and microscopes use different lens, helping us to see the world in a better

Read it and make it as table.

Answer:

No. Because it would correspond to zero Instantaneous acceleration.

Explanation:

hope this helps

Answer:

0.706

Explanation:

Since the other astronaut measures a longer time, this is a time dilation problem. So, our equation for time dilation is given by

T = T₀/√(1 - β²) where T = period on passing space ship = 31.87 s, T₀ = period on other space vehicle = proper time = 22.58 s and β = relative velocity of between the two observers.

T = T₀/√(1 - β²)

√(1 - β²) = T₀/T

squaring both sides, we have

[√(1 - β²)]² = (T₀/T)²

1 - β² = (T₀/T)²

β² = 1 - (T₀/T)²

taking square root of both sides, we have

√β² = √[1 - (T₀/T)²]

β = √[1 - (T₀/T)²]

substituting the values of the variables into the equation, we have

β = √[1 - (22.58 s/31.87 s)²]

β = √[1 - (0.7085)²]

β = √[1 - 0.502]

β = √0.498

β = 0.706

Answer:

b

Explanation:

f1=-f2 that could be thank u

Answer:

Because the earth's axis is tilted. ... It is all about the tilt of the Earth's axis. Many people believe that the temperature changes because the Earth is closer to the sun in summer and farther from the sun in winter. In fact, the Earth is farthest from the sun in July and is closest to the sun in January

Answer:D.

Explanation:

Answer:

K.E. = ½ × mv²

= ½ × 6 × (2)²

= ½ × 6 × 4

= 3 × 4

= 12 J