Yesterday the outdoor high temperature was 21.8 degrees and the low temperature was -4.6 degrees. Determine the difference between the high and low temperatures.

Answer:

9

Step-by-step explanation:

Find the area of the rectangle. 5 x 3 = 15

Because the dilated area is 135, all you have to do it 135 divided by 15 which gives you 9!

You have a project completion time of 60 days, and a non-critical path with 5 days of slack was delayed by 10 days. The correct answer is option ii. 65. The new project completion time after the delay of the non-critical task is 65 days.

To determine the new project completion time, follow these steps:

1. Determine the impact of the delay on the project completion time:

Since the non-critical path has 5 days of slack, it means that it can be delayed by up to 5 days without affecting the project completion time. However, the task was delayed by 10 days, which is 5 days more than its slack.

2. Calculate the new project completion time:

To find the new project completion time, add the extra delay (5 days) to the original project completion time (60 days).

New project completion time = Original project completion time + Extra delay
New project completion time = 60 days + 5 days
New project completion time = 65 days

So, the new project completion time is 65 days.

Based on the given options:
i. 60 - Incorrect, as the delay affects the project completion time.
ii. 65 - Correct, as calculated above.
iii. 70 - Incorrect, as the delay is not long enough to push the project completion time to 70 days.
iv. 55 - Incorrect, as the delay increases the project completion time, not decreases it.

Therefore, the correct answer is option ii. 65. The new project completion time after the delay of the non-critical path is 65 days.

To know more about the critical path refer here:

https://brainly.com/question/29451059#

#SPJ11

Answer:

=715.92ft-2

Step-by-step explanation:

first find the area of the two circles by 2πr-2

then find the perimeter of one circle and use it as length and multiply it with 13ft and add the areas to get the answer

(a) A 90% confidence interval for the proportion of US adults favoring taxes on soda and junk food is (0.293, 0.347).

(b) The margin of error is 2.7%.

(c) To achieve a 1% margin of error with 90% confidence, a sample size of 6,811 is needed.


(a) To find the 90% confidence interval, use the formula CI = p ± Z * √(p(1-p)/n), where p is the proportion, Z is the Z-score for 90% confidence (1.645), and n is the sample size.
p = 0.32, n = 1000
CI = 0.32 ± 1.645 * √(0.32(1-0.32)/1000) = (0.293, 0.347)

(b) The margin of error is half the width of the confidence interval.
Margin of error = (0.347 - 0.293) / 2 = 0.027 or 2.7%.

(c) To find the needed sample size for a 1% margin of error, use the formula n = (Z²* p * (1-p)) / E², where E is the desired margin of error (0.01).
n = (1.645² * 0.32 * (1-0.32)) / 0.01² = 6810.8, rounding up to 6,811.

To know more about confidence interval click on below link:

https://brainly.com/question/29680703#

#SPJ11

The ship’s horizontal distance from the lighthouse is  approximately 480.1 feet.

To solve it, we can make use of the tangent function.

Let x represent the horizontal separation between the boat and the lighthouse.

The lighthouse beacon is then at the top of the triangle, the boat is at the bottom, and the adjacent side is the horizontal distance x. 13° is the elevation angle, which is the angle perpendicular to x. The 126-foot height of the lighthouse beacon above the water is on the opposing side.

tan(13°) = [tex]\frac{126}{x}[/tex]

Multiplying both sides by x, we get:

x × tan(13°) = 126

Dividing both sides by tan(13°), we get:

x =  [tex]\frac{126}{tan(13)}[/tex]

Using a calculator, we find:

x ≈ 480.1 feet

To know more about use of tangent function, visit:

https://brainly.in/question/55747696

a. null hypothesis [tex]H_0[/tex]: PRmean=non-PRmean

b. the sample mean lies in the interval, so we fail to reject null hypothesis

c. critical value z(0.05)=1.96 is less than calculated z=3.56 so we fail to accept null hypothesis.

A null hypothesis states that there is no statistical significance to be discovered in the set of presented observations. The validity of a theory is assessed through hypothesis testing on sample data. Sometimes known as the "null," it is represented by the symbol  [tex]H_0[/tex].

(a)

null hypothesis  [tex]H_0[/tex]: PRmean=non-PRmean

(b).

i. [tex](1-\alpha)\times 100\%[/tex] confidence interval for sample

[tex]mean=mean \pm z(\frac{\alpha }{2} )*SE(mean)[/tex]

95% confidence interval for sample PRmean=PRmean±z(.05/2)*SE(mean)=69.5±1.96*1.9

=69.5±3.724=(65.776,73.224)

95% confidence interval for sample non-PRmean=non-PRmean±z(.05/2)*SE(mean)=61.2±1.96*1.7

=69.5±3.332=(57.868, 64.532)

ii. null hypothesis not be rejected

iii. since the sample mean lies in the interval, so we fail to reject null hypothesis

(c).

i. mean difference=69.5-61.5=8

ii. SE(difference)=[tex]\sqrt{SE(PR)^2+SE(non-PR)^2}[/tex]

[tex]=\sqrt{1.9\times 1.9+1.2\times 1.2}[/tex]

=2.2472

iii. we use z-test and z=(mean difference)/SE(difference)=8/2.2472=3.56

iv. here level of significance alpha is not mentioned,

let [tex]\alpha[/tex] =0.05

critical value z(0.05)=1.96 is less than calculated z=3.56 so we fail to accept null hypothesis.

To know more about null hypothesis, visit:

https://brainly.com/question/4436370

#SPJ1

The equation of the transformed exponential function g(x) is g(x) = 2^-x - 1

From the question, we have the following parameters that can be used in our computation:

Parent function: y = 2^x

The graph of the transformed exponential function g(x) passes through the points  (-2,3), (-1,1), (0,0), (1,-0.5) and (2, -0.75)

So, we have the following transformation steps:

1st Transformation:

Reflect y = 2^x across the y-axis

So, we have

y = 2^-x

2nd Transformation:

Translate y = 2^-x down by 1 unit

So, we have

y = 2^-x - 1

This means that

g(x) = 2^-x - 1

Hence, the equation of the function g(x) is g(x) = 2^-x - 1

Read more about transformation at

https://brainly.com/question/1548871

#SPJ1

The Polar cordinates is  ∫∫h(ρ, θ) = ∫(0 to 2√32)∫(0 to π/4) ρ dρ dθ.


To convert the given integral to polar coordinates, follow these steps:

1. Identify the Cartesian integral bounds: x ranges from 1/2√0 to 1 and y ranges from 1 - 2√32 to 32.

2. Determine the polar integral bounds: ρ ranges from 0 to 2√32, and θ ranges from 0 to π/4 (as the angle θ increases from 0 to π/4, the polar curve covers the region of interest).

3. Express the integrand in polar coordinates: The Jacobian of the polar coordinate transformation is ρ, so the integrand becomes ρ.

4. Write the integral in polar coordinates: ∫(0 to 2√32)∫(0 to π/4) ρ dρ dθ.

To know more about Jacobian click on below link:

https://brainly.com/question/31326284#

#SPJ11

Yes ,  y = 8x² - 10  is a function .

What is a linear equation in mathematics?

A linear equation in algebra is one that only contains a constant and a first-order (direct) element, such as y = mx b, where m is the pitch and b is the y-intercept.

                         Sometimes the following is referred to as a "direct equation of two variables," where y and x are the variables. Direct equations are those in which all of the variables are powers of one. In one example with just one variable, layoff b = 0, where a and b are real numbers and x is the variable, is used.

y = 8x² - 10

the graph attached below

Learn more about linear equation

brainly.com/question/11897796

#SPJ1

The calculated value of x is 3 given that f(x) = 2x - 1 and f(x) = 5

From the question, we have the following parameters that can be used in our computation:

f(x) = 2x - 1

f(x) = 5

To find x, we can use the formula of the given function:

f(x) = 2x - 1

And substitute f(x) = 5:

5 = 2x - 1

Add 1 to both sides:

6 = 2x

Divide both sides by 2:

x = 3

Therefore, the value of x is 3.

Read more about function at

https://brainly.com/question/28532394

#SPJ1

To evaluate f(0) for the function f(x) = (5)x + 12, we need to substitute 0 for x in the equation.

This gives us f(0) = (5)(0) + 12.

In the second step, we need to multiply 5 by 0, which gives us 0.

Therefore, the expression simplifies to f(0) = 0 + 12.

Finally, we add 0 and 12 to get the value of f(0). This gives us f(0) = 12.

Therefore, the value of the function at x = 0 is 12.

It's important to note that when we substitute a value for a variable in a function, we are evaluating the function at that particular value.

In this case, we evaluated f(x) at x=0, and found that the value of the function at x=0 is 12.'

Learn more about  evaluating f(0) :

https://brainly.com/question/18064299

#SPJ11

Answer:

Step-by-step explanation:

We can use trigonometry to solve this problem. Let's call the height of the antenna h and the length of the wire connecting the top of the antenna to the ground d.From the problem statement, we know that d = 7 feet and the angle of elevation θ is 75 degrees. The angle of elevation is the angle between the horizontal and the line of sight to the top of the antenna.We can use the tangent function to find h:tan(θ) = opposite / adjacentIn this case, the opposite side is the height of the antenna h, and the adjacent side is the length of the wire d + 0. This is because the wire touches the ground at a point 7 feet away from the base of the antenna, so the total length of the wire is d + 0.Substituting the values we have:tan(75 degrees) = h / (7 feet + 0)Simplifying:h = (7 feet) × tan(75 degrees)Using a calculator:h ≈ 24.16 feetTherefore, the height of the antenna is approximately 24.16 feet.

For this mass and spring system, the period of the simple harmonic motion is 1.42 seconds.

The period of simple harmonic motion can be calculated using the formula T = 2π√(m/k), where T is the period, m is the mass, and k is the spring constant.

In this case, the mass is 2 N, which is equivalent to 0.204 kg (using g = 9.8 m/s^2). The spring constant is 4 N/m.

So, plugging the values into the formula, we get:

T = 2π√(0.204 kg/4 N/m)
T = 2π√(0.051 m)
T = 2π(0.226 s)
T = 1.42 s

Therefore, the period of simple harmonic motion for this mass and spring system is 1.42 seconds.

To learn more about Simple harmonic motion, visit:

https://brainly.com/question/14446439

#SPJ11

The following parts can bee answered by the concept of polar form.

I. The polar form of the equation x=3 is r = 3/cos θ.

J. The polar form of the equation x² − y² = 9 is r = 3/√(cos(2θ)) or r = -3/√(cos(2θ)).

I. To convert the equation x=3 to polar form, we need to express x and y in terms of r and θ. Since x is a constant, we can write x = r cos θ. Substituting x=3, we get 3 = r cos θ. Solving for r, we have r = 3/cos θ.

Therefore, the polar form of the equation x=3 is r = 3/cos θ.

J. To convert the equation x² − y² = 9 to polar form, we can use the identity x = r cos θ and y = r sin θ. Substituting these expressions into the equation, we get r² cos² θ - r² sin² θ = 9. Simplifying, we get r² (cos² θ - sin² θ) = 9. Using the identity cos² θ - sin² θ = cos(2θ), we get r² cos(2θ) = 9. Solving for r, we have r = ±3/√(cos(2θ)).

Therefore, the polar form of the equation x² − y² = 9 is r = 3/√(cos(2θ)) or r = -3/√(cos(2θ)).

Therefore,

I. The polar form of the equation x=3 is r = 3/cos θ.

J. The polar form of the equation x² − y² = 9 is r = 3/√(cos(2θ)) or r = -3/√(cos(2θ)).

To learn more about polar form here:

brainly.com/question/11705494#

#SPJ11

5.71 x [tex]10^{-6}[/tex] > 5.71 x [tex]10^{-8}[/tex] becomes a true statement.

To compare 5.71 x [tex]10^{-6}[/tex] and 5.71 x [tex]10^{-8}[/tex], we can rewrite them with the same exponent (since the base is the same):

5.71 x [tex]10^{-6}[/tex] = 0.00000571

5.71 x [tex]10^{-8}[/tex] = 0.0000000571

Now we can see that 0.00000571 is greater than 0.0000000571, so:

5.71 x [tex]10^{-6}[/tex] > 5.71 x [tex]10^{-8}[/tex]

Therefore, the sign that makes the statement true is > (greater than).

What is an exponent?

An exponent is a mathematical notation that indicates the number of times a quantity is multiplied by itself. It is usually written as a small raised number to the right of a base number, such as in the expression "3²" where 3 is the base and 2 is the exponent. The exponent tells us how many times to multiply the base by itself.

For example, 3² means "3 raised to the power of 2" or "3 squared" and is equal to 3 × 3 = 9. Similarly, 2³ means "2 raised to the power of 3" or "2 cubed" and is equal to 2 × 2 × 2 = 8.

Exponents are commonly used in algebra and other branches of mathematics to simplify expressions and to represent very large or very small numbers in a compact way. They are also used in scientific notation to represent numbers in a format that is easier to work with than writing out all the digits of the number.

To know more about exponent, visit:

https://brainly.com/question/5497425

#SPJ1

Each conditional probability is computed based on the two preceding words. For example, we can write: p(is|There) = p(is|There, _)

Assuming that we are working with a corpus of text and that the probabilities are based on the frequency of co-occurring words, we can use the chain rule to write the joint probability as:

p(There, is, only, one, person, who, is, not, ordinary) = p(There) × p(is|There) × p(only|There is) × p(one|is only) × p(person|only one) × p(who|one person) × p(is|person who) × p(not|who is) × p(ordinary|is not)

To compute this joint probability using the second-order Markov assumption, we would need to consider the probabilities of words given the two previous words. We can write this as:

p(There, is, only, one, person, who, is, not, ordinary) = p(There) × p(is|There) × p(only|There is) × p(one|is only) × p(person|only one) × p(who|one person) × p(is|person who) × p(not|who is) × p(ordinary|is not)

where each conditional probability is computed based on the two preceding words. For example, we can write: p(is|There) = p(is|There, _)

To know more about probability, visit:

https://brainly.com/question/13604758

#SPJ1

The sequence that is defined as (5n - 1)! (5n + 1)! diverges.

To determine whether the sequence converges or diverges and find the limit if it converges, let's analyze the given sequence:

(5n - 1)! (5n + 1)!.

First, let's rewrite the sequence as aₙ = (5n - 1)! (5n + 1)!.

Observe the growth rate of the terms.
Notice that both (5n - 1)! and (5n + 1)! are factorials, which grow rapidly as n increases.

The product of these two factorials will also grow very rapidly.

Based on the rapid growth rate of the terms in the sequence, we can conclude that the sequence diverges.

The sequence (5n - 1)! (5n + 1)! diverges.

Learn more about a sequence:

https://brainly.com/question/6561461

#SPJ11

The Laplace transform of f(t) can be computed using the integral formula and the exponential integral, and is given by [tex]-Ei(-(s+2))[/tex] for [tex]Re(s) > -2[/tex].

To compute the Laplace transform of a function, we first need to define the function and then apply the Laplace transform integral formula. In this case, we have:

f(t) = { 0 if [tex]t < 0, e^(-2t)[/tex] if [tex]t >= 0[/tex]}

The Laplace transform of this function can be computed using the integral formula:

F(s) = L{f(t)} = ∫[0, ∞)[tex]e^(-st) f(t) dt[/tex]

where s is a complex variable.

Using the definition of f(t) and splitting the integral into two parts, we can write:

F(s) = ∫[0, ∞) [tex]e^(-st) e^(-2t) dt[/tex]

To evaluate this integral, we can use integration by substitution, letting u = (s+2)t. Then, du/dt = s+2 and dt = du/(s+2). Substituting in the integral, we get:

F(s) = ∫[0, ∞) [tex]e^(-u) du/(s+2)[/tex]

Using the definition of the exponential integral, Ei(x) = - ∫[-x, ∞) [tex]e^(-t)/t dt[/tex], we can write:

F(s) = -Ei(-(s+2))

Therefore, the Laplace transform of f(t) is given by:

F(s) = { -Ei(-(s+2)) if Re(s) > -2, ∞ if Re(s) <= -2 }

where Re(s) denotes the real part of s.

In summary, the Laplace transform of f(t) can be computed using the integral formula and the exponential integral, and is given by -Ei(-(s+2)) for Re(s) > -2.

To know more about Laplace transform of a function refer here:

https://brainly.com/question/27753787

#SPJ11

Events A and B are mutually exclusive.

Prime numbers are numbers that are greater than 1 and have only two distinct positive divisors, which are 1 and the number itself. In this case, the prime numbers among the digits 0 through 9 are 2, 3, 5, and 7, as they are not divisible by any other number within the given range.

Odd numbers are numbers that are not divisible by 2, meaning they have a remainder of 1 when divided by 2. In this case, the odd numbers among the digits 0 through 9 are 1, 3, 5, 7, and 9.

Upon comparing the prime numbers (2, 3, 5, 7) and odd numbers (1, 3, 5, 7, 9) within the range of 0 through 9, it is evident that the numbers 3 and 5 are common to both events A and B, as they are both prime and odd.

Mutually exclusive events refer to events that cannot occur simultaneously. If one event occurs, the other cannot occur at the same time. In this case, event A (obtaining a prime number) and event B (obtaining an odd number) are mutually exclusive, as the numbers 3 and 5 are the only numbers that satisfy both events, and only one outcome can occur.

Therefore, events A and B are mutually exclusive, as they cannot occur simultaneously.

To learn more about mutually exclusive here:

brainly.com/question/30512497#

#SPJ11

when you add all the answers up and divide by 2 is your answer

Answer:

P=17/30

Step-by-step explanation:

The probability that at least one of the 7 randomly chosen items will have a defect is approximately 52.17%

A manufacturing machine has a 9% defect rate. If 7 items are chosen at random, the probability that at least one will have a defect can be found using the complement probability.

First, find the probability of an item not having a defect, which is 91% (100% - 9%). Then, calculate the probability of all 7 items being defect-free: (0.91)7 ≈ 0.4783.

To find the probability that at least one item has a defect, subtract the probability of all items being defect-free from 1: 1 - 0.4783 ≈ 0.5217.

Know more about probability here:

https://brainly.com/question/30034780

#SPJ11

.

The solution to the initial-value problem is y(t) = sin(t) - [e^(-πt) - e^(-2πt)] × u(t-π)/2, 0 ≤ t < ∞.

To solve this initial-value problem using Laplace transform, we will apply the Laplace transform to both sides of the differential equation and use the initial conditions to find the Laplace transform of y.

Taking the Laplace transform of both sides of the differential equation, we get

Ly'' + Ly = Lf(t)

Using the properties of Laplace transform, we can find Ly' and Ly as follows

Ly' = sLy - y(0) = sLy - 0 = sLy

Ly'' = s^2Ly - s*y(0) - y'(0) = s^2Ly - 1

Substituting these expressions into the differential equation, we get:

s^2Ly - 1 + Ly = Lf(t)

Simplifying, we get

Ly = Lf(t) / (s^2 + 1) + 1/s

Now we need to find the Laplace transform of f(t). Using the definition of Laplace transform, we get

Lf(t) = ∫[0,π] 0e^(-st) dt + ∫[π,2π] 1e^(-st) dt + ∫[2π,∞) 0*e^(-st) dt

= 1/s - (e^(-πs) - e^(-2πs))/s

Substituting this expression into the equation for Ly, we get

Ly = [1/s - (e^(-πs) - e^(-2πs))/s] / (s^2 + 1) + 1/s

Now we need to find y(t) by taking the inverse Laplace transform of Ly. We can use partial fraction decomposition to simplify the expression for Ly

Ly = [(1/s)/(s^2 + 1)] - [(e^(-πs) - e^(-2πs))/s]/(s^2 + 1) + 1/s

Using the inverse Laplace transform of 1/(s^2 + 1), we get

y(t) = sin(t) - [e^(-πt) - e^(-2πt)]*u(t-π)/2

where u(t) is the unit step function.

Learn more about Laplace transform here

brainly.com/question/14487937

#SPJ4

Answer:

x?y      

?=<  

I hope I helped

The slope (m) is equal to the tangent of the angle, so for a 30-degree angle, m = tan(30) = 1/√3. Since the ray contains the origin, the y-intercept (b) is 0. Therefore, the equation of the ray is y = (1/√3)x.

To determine the equation of the ray consisting of the origin and all points whose bearing is 30 degrees, we first need to find the slope of the ray.

The ray y = x, x > 0 contains the origin and all points in the coordinate system whose bearing is 45 degrees. This means that it forms an angle of 45 degrees with the positive x-axis.

Using trigonometry, we can determine that the slope of this ray is tan(45 degrees) = 1.

To find the slope of the ray we're interested in, which forms an angle of 30 degrees with the positive x-axis, we use the same process: tan(30 degrees) = 1/sqrt(3).

Since the ray passes through the origin, its equation will be of the form y = mx, where m is the slope we just calculated.

So the equation of the ray is y = (1/sqrt(3))x.

Learn more about Equation:

brainly.com/question/29538993

#SPJ11

On average, an individual waiting at the bus stop will wait 15 minutes to get on a bus.

Time in mathematics is a concept that is used to measure and record the passing of events. It is used to measure the duration between two events. Time is also used to measure the rate of change of a certain quantity over time. Time is expressed as a numerical quantity, such as seconds, minutes, hours, days, weeks, months, and years, and can be measured in increments such as fractions of a second, milliseconds, and nanoseconds. In mathematics, time is often represented using the Cartesian coordinate system, with the x-axis representing the passing of time and the y-axis representing the value of the quantity being measured.

The average wait time at the bus stop is 15 minutes. This is because Bus A and Bus B pass in a 30-minute cycle. Bus A passes 10 minutes after Bus B has passed, and Bus B passes 20 minutes after Bus A has passed. Therefore, an individual waiting at the bus stop will wait an average of 15 minutes to get on a bus.

To calculate this average wait time, we can use the following formula:

AverageWaitTime = (TimeBusAPasses + TimeBusBPasses) / 2

Using the given information, we can plug in the values for each bus:

AverageWaitTime = (10 minutes + 20 minutes) / 2
AverageWaitTime = 15 minutes

Therefore, on average, an individual waiting at the bus stop will wait 15 minutes to get on a bus.

To know more about value click-
http://brainly.com/question/843074
#SPJ1

The final expression for the nth term of the series is an = [tex]((x-6)^3 * 3! * (x-6)^{(3n-6))}/(3^{(n-1)} * (3n-3)(3n-4)(3n-5)...(6)(5)(4)(3)(2))[/tex].

To find an expression for an, we first need to notice that each term in the series is a power of (x-6) raised to a multiple of 3, divided by the product of that multiple and the factorial of that multiple divided by 3. In other words, the general term of the series can be written as:

an = [tex]((x-6)^{(3n-3))}/((3n-3)!(3^{(n-1)))[/tex]

We can simplify this expression by factoring out [tex](x-6)^3[/tex] from the numerator:

an = [tex]((x-6)^3 * (x-6)^{(3n-6))}/((3n-3)!(3^{(n-1)))[/tex]

Now we can simplify further by using the formula for the product of consecutive integers:

(3n-3)! = (3n-3)(3n-4)(3n-5)...(6)(5)(4)(3)(2)(1)

We can rewrite this expression as:

(3n-3)! = [(3n-3)(3n-4)(3n-5)...(6)(5)(4)(3)(2)] / (3⋅2)

Notice that the denominator is equal to 3⋅2!, which is exactly what we need in the denominator of our original expression. Therefore, we can substitute this new expression for (3n-3)! in our original expression for an:

an = [tex]((x-6)^3 * (x-6)^{(3n-6))}[/tex]/([(3n-3)(3n-4)(3n-5)...(6)(5)(4)(3)(2)] / (3⋅2))

Simplifying this expression, we get:

an = [tex]((x-6)^3 * 3! * (x-6)^{(3n-6))}/(3^{(n-1)} * (3n-3)(3n-4)(3n-5)...(6)(5)(4)(3)(2))[/tex]

This is our final expression for the nth term of the series.

For more such questions on Series.

https://brainly.com/question/30483546#

#SPJ11

Answer:

[tex]y = {5}^{x} [/tex]

#4 is the correct answer.

Answer:

[tex]y = {5}^{x} [/tex]

#4 is the correct answer.

Step-by-step explanation:

Angles R and D are the same just as RSW is to ESD

The  corners of the frame are 90°

You should recall that a right triangle is an orthogonal triangle in which one angle is 90°. The sides of a right triangle are commonly referred to with the variables a, b, and c, where c is the hypotenuse and a and b are the lengths of the shorter sides. Their angles are also typically referred to using the capitalized letter corresponding to the side length.

Let the corners of the canvas frame be right angle triangles

the AB² = aC² + BC²

THE AB = AC = √18²+24²

⇒ AC =√324 + 576

This means that Ac = √900

AC = 30

Therefore fore when the ruler measure 30 inches feet on the diagonal, the angle of the frame is a right angle

If the sides of a right angle  are A,B and the hypothenuse is C

The A² + B² = C²

Learn more about right angle triangle on https://brainly.com/question/3770177

#SPJ1

The function f(x,y) has a line of discontinuity along the x-axis (i.e., y=0) and the y-axis (i.e., x=0).

What is function?

In mathematics, a function is a relationship between two sets of elements, called the domain and the range, such that each element in the domain is associated with a unique element in the range. In simpler terms, a function is a set of rules that takes an input value and produces a corresponding output value.

The function f(x,y) = ln|xy| is discontinuous along the lines x=0 and y=0.

To see this, consider approaching the origin along different paths. For example, if we approach the origin along the x-axis (i.e., y=0), then we have f(x,0) = ln|0|, which is undefined. Similarly, if we approach the origin along the y-axis (i.e., x=0), then we have f(0,y) = ln|0|, which is also undefined.

Therefore, the function f(x,y) has a line of discontinuity along the x-axis (i.e., y=0) and the y-axis (i.e., x=0).

To learn more about functions from the given link:

https://brainly.com/question/12431044

#SPJ1

The function f(x,y) has a line of discontinuity along the x-axis (i.e., y=0) and the y-axis (i.e., x=0).

What is function?

In mathematics, a function is a relationship between two sets of elements, called the domain and the range, such that each element in the domain is associated with a unique element in the range. In simpler terms, a function is a set of rules that takes an input value and produces a corresponding output value.

The function f(x,y) = ln|xy| is discontinuous along the lines x=0 and y=0.

To see this, consider approaching the origin along different paths. For example, if we approach the origin along the x-axis (i.e., y=0), then we have f(x,0) = ln|0|, which is undefined. Similarly, if we approach the origin along the y-axis (i.e., x=0), then we have f(0,y) = ln|0|, which is also undefined.

Therefore, the function f(x,y) has a line of discontinuity along the x-axis (i.e., y=0) and the y-axis (i.e., x=0).

To learn more about functions from the given link:

https://brainly.com/question/12431044

#SPJ1