Answer:
Production of liquid oxygen from air Oxygen is generated by liquefaction of atmospheric air in the air separation unit (ASU). Cryogenic technique is the most commonly used for producing liquid oxygen for industrial and medical applications .
Explanation:
An air separation unit (ASU) uses continuous cryogenic distillation to continuously liquefy ambient air and separate the oxygen gas.
What is oxygen?Oxygen is the second largest abundant element in the atmosphere comprising 20.8% by volume. Despite being mostly used as a gas, oxygen is frequently stored as a liquid. Compared to high-pressure gaseous storage with a similar capacity, liquid storage is less expensive and bulkier.
A cryogenic storage tank, one or more vaporizers, and a pressure control system make up a typical storage system. The cryogenic tank is built similarly to a vacuum bottle.
The primary air compressor is where the ASU manufacturing process starts, and the product storage tanks' output is where it concludes. Moisture, carbon dioxide, and hydrocarbons are taken out of the air after it has been compressed and put through a purification system.
To find more on oxygen manufacturing, refer here:
https://brainly.com/question/1064242
#SPJ6
how many liters of hydrogen gas I needed to react with CS2 to produce 2.5 L of CH4 At STP
Answer:
9.8 L
Explanation:
The reaction that takes place is:
4H₂(g) + CS₂(g) → CH₄(g)+ 2H₂S(g)At STP, 1 mol of any gas occupies 22.4 L.
We calculate how many moles are there in 2.5 L of CH₄ at STP:
2.5 L ÷ 22.4 L/mol = 0.11 mol CH₄Then we convert CH₄ moles into H₂ moles, using the stoichiometric coefficients of the reaction:
0.11 mol CH₄ * [tex]\frac{4molH_2}{1molCH_4}[/tex] = 0.44 mol H₂Finally we calculate the volume that 0.44 moles of H₂ would occupy at STP:
0.44 mol * 22.4 L/mol = 9.8 LWhich of these half-reactions represents reduction?
I. Fe2+ → Fe3+
II. Cr2O72- → Cr3+
III. MnO4- → Mn2+
Answer: The half-reactions represents reduction are as follows.
[tex]Cr_{2}O^{2-}_{7} \rightarrow Cr^{3+}[/tex][tex]MnO^{-}_{4} \rightarrow Mn^{2+}[/tex]Explanation:
A half-reaction where addition of electrons take place or a reaction where decrease in oxidation state of an element takes place is called reduction-half reaction.
For example, the oxidation state of Cr in [tex]Cr_{2}O^{2-}_{7}[/tex] is +6 which is getting converted into +3, that is, decrease in oxidation state is taking place as follows.
[tex]Cr_{2}O^{2-}_{7} + 3 e^{-} \rightarrow Cr^{3+}[/tex]
Similarly, oxidation state of Mn in [tex]MnO^{-}_{4}[/tex] is +7 which is getting converted into +2, that is, decrease in oxidation state is taking place as follows.
[tex]MnO^{2-}_{4} + 5 e^{-} \rightarrow Mn^{2+}[/tex]
Thus, we can conclude that half-reactions represents reduction are as follows.
[tex]Cr_{2}O^{2-}_{7} \rightarrow Cr^{3+}[/tex][tex]MnO^{-}_{4} \rightarrow Mn^{2+}[/tex]Calculate the volume of 0.07216 M AgNO3 needed to react exactly with 0.3572 g of pure Na2CO3 to produce solid Ag2CO3.
Answer:
93.4 mL
Explanation:
Let's state the reaction:
2AgNO₃ + Na₂CO₃ → Ag₂CO₃ + 2NaNO₃
We determine the moles of sodium carbonate:
0.3572 g . 1mol / 105.98g = 3.37×10⁻³ moles
Ratio is 1:2. We say:
1 mol of sodium carbonate react to 2 moles of silver nitrate
Then, our 3.37×10⁻³ moles of carbonate may react to: 3.37×10⁻³ . 2
= 6.74×10⁻³ moles
If we convert to mmoles → 6.74×10⁻³ mol . 1000 mmol / mol = 6.74 mmol
Molarity is mol/L but we can use mmol /mL
6.74 mol / volume in mL = 0.07216 M
6.74 mol / 0.07216 M = volume in mL → 93.4 mL
4. Are there any solutions that have the measure of -3
? Briefly explain why.
Please type out all of your calculations for this dilution equation: In your vitamin C experiment, it calls for a 5% concentration of iodine. However, your 7 fluid oz. tincture of iodine contains 70% iodine. How would you dilute this
Answer:
The original7 fluid oz. 70% tincture of iodine is diluted to 98 fluid oz. to obtain a 5% solution.
Explanation:
Dilution is a technique employed in experimental sciences such as chemistry and biochemistry as well as in medicine to obtain a less concentrated solution from a more concentrated one.
The dilution formula is the most important formula required in dilution. The dilution formula is given as: C1V1 = C2V2
Where C1 is the initial concentration of the stock solution;
V1 is the volume of the stock solution required;
C2 is the final concentration of the diluted solution to be prepared;
V2 is the final volume of the diluted solution.
Using the dilution formula to determine the answer to the above question:
C1 = 70% = 0.7; V1 = 7 fluid oz.; C2 = 5% = 0.05; V2 = ?
To determine V2, it is made subject of the dilution formula:
V2 = C1V1/C2
V2 = (0.7 × 7) / 0.05
V2 = 98 fluid oz.
Therefore, the original7 fluid oz. 70% tincture of iodine is diluted to 98 fluid oz. to obtain a 5% solution.
Name one major function of the organ systems listed below.
1. Skeletal System
2. Muscular System
3. Digestive System
4. Respiratory System
5. Circulatory System
6. Nervous System
7. Urinary System
Plss help I’ll give u 35 points
The organ system has been defined as the collective working of the organs for performing a specified task. Each organ system has been assigned a major task to be performed.
The function of the following organ systems have been:
Skeletal system: It has been comprised of bones and muscle. The major function of skeletal system has to maintain the body structure, and allow the interaction of muscular system to nervous system.Muscular system: It has been dealing with the voluntary and involuntary muscles. The major function has been the operation of the skeletal system by following the commands from the nervous system.Digestive system: It has been comprised of esophagus, stomach, intestine. The major function has been the breakdown of food and absorption of nutrients.Respiratory system: The respiratory system has been comprised of lungs and trachea. It has a major function of release of harmful gases, as well as oxidation and reduction of the byproducts of glycolysis.Circulatory system: It has been majorly comprises heart. The major function has been purification of blood and transport to different parts of the body.Nervous system: It has been comprised of brain and neurons, the function has been transmission of signals to the stimuli and responsible for conscious and subconscious behavior.Urinary system: The major part has been kidneys and the nephrons. The function has been the filtration of the waste liquid and urination.For more information about organ system, refer to the link:
https://brainly.com/question/12825206
H
CH
ll
C C
C001
CH H
2)
C C
1
NO ,
2
BY
Answer:
hakdog
Explanation:
pangitag lainbbbsjsbshsisbsjsbshxx
Correct order of the levels of classification in the ecosystem
55
Tam pours salt water into one beaker and then pours acid into another beaker.
Tam realises that the liquids are not labelled.
What should Tam do?
A
Smell each liquid in order to identify them.
В.
Guess which beaker contains each liquid.
С
Mix the liquids together to find out what they are.
D
Safely throw away the liquids and get new ones.
3
PM
2021
Answer:
correct answer i C i think so
Answer:
Safely throw away the liquids and get new ones.
Explanation:
Not A because
you shouldn't smell them cause it could be toxic and hurt you
Not B
you should never guess which chemical are which cause if your not correct and use the wrong one you could have a chemical reaction
Not C
you cant mix random liquids it could make a chemical reaction to exploded ore worse create a hurtful gas
Bryce and his lab partner come up with an idea they think will save time: We just used the fast titrations. You can stop the video when the solution turns pink. We know that when the solution turns pink, the titration is complete, so we just read the volume from the burette as soon as it turns pink. This is faster than going through all the shorter videos and works just as well. Do you agree with Bryce
Answer:
Yes.
Explanation:
Yes, I agree with Bryce and his lab partner because titration is completed when the solution changes its colour. Add chemical from the burette until the solution change its colour so then calculate the amount of chemical is used from the burette and the time at which the titration is completed. Always be careful for calculating the titration in order to get accurate data of the solution.
A potted plant is placed under a grow lamp, which provides 6,400 J of energy to the plant and the soil over the course of an hour. The specific heat capacity of the soil is about 0.840 J/g°C and the temperature goes up by 9.25°C of soil. How many grams of soil are there?
Answer:
823.7g
Explanation:
Using the formula as follows:
Q = m × c × ∆T
Where;
Q = amount of heat (J)
m = mass of substance (g)
c = specific heat capacity (J/g°C)
∆T = change in temperature (°C)
Using the information given in this question as follows:
Q = 6,400 J
m = ?
c of soil = 0.840 J/g°C
∆T = 9.25°C
Using Q = mc∆T
m = Q ÷ c∆T
m = 6,400 ÷ (0.840 × 9.25)
m = 6400 ÷ 7.77
m = 823.7g
Answer:
There are 823.68 grams.
Explanation:
Calorimetry is responsible for measuring the amount of heat generated or lost in certain physical or chemical processes.
Between heat and temperature there is a relationship of direct proportionality. The constant of proportionality depends on the substance that constitutes the body and its mass, and is the product of the specific heat by the mass of the body. In summary, the amount of heat Q that receives or transmits a mass m of a substance with specific heat C to raise its temperature from T1 to T2 is given by the formula:
Q= C*m* (T2- T1) = C*m* ΔT
In this case:
Q= 6400 JC= 0.840 [tex]\frac{J}{g*C}[/tex]m= ?ΔT= 9.25 CReplacing:
6400J= 0.840 [tex]\frac{J}{g*C}[/tex] *m* 9.25 C
Solving:
[tex]m=\frac{6400 J}{0.840 \frac{J}{g*C} *9.25 C}[/tex]
m=823.68 grams
There are 823.68 grams.
Why do vinyl raincoats become brittle as they get old, even if they are not exposed to air or to any pollutants
Answer:
The substances made from polyvinyls are generally brittle and hard. This property prevails because the polymer strands present in the polyvinyls form a very regular and well-organized packing composition in the solid-state. The Van der Waals associations between the strands make the substance brittle. To make the substance soft and suitable to use as a raincoat, the incorporation of small molecules is done within the molten polymer before the hardening of the plastic.
These polymer strands act as plasticizers and prevent the strands of polymer from forming a hard and brittle conformation.
I need help with my chemistry
Answer:
Single displacement
Explanation:
what is the shape of the TeF5 anion
Answer:
There are four atoms and two lone pairs around the central atom, which corresponds to AX4E2 or square planar. The shape of XeF4 is square planar.
Explanation:
I hope it's help u
Calculate the pOH in a solution with [H+] =9.8 • 10-3 M
The pOH of the solution containing 9.8×10⁻³ M of hydrogen ion concentration, [H⁺] is 11.99
How do i determine the pOH of the solution?First, we shall determine the hydroxide ion concentration [OH⁻] in the solution. Details below:
hydrogen ion concentration, [H⁺] = 9.8×10⁻³ MHydroxide ion concentration [OH⁻] =?[H⁺] × [OH⁻] = 10¯¹⁴
9.8×10⁻³ × [OH⁻] = 10¯¹⁴
Divide both side by 9.8×10⁻³
[OH⁻] = 10¯¹⁴ / 9.8×10⁻³
[OH⁻] = 1.02×10⁻¹² M
Finally, we shall determine the pOH of the solution. Details below:
Hydroxide ion concentration [OH⁻] = 1.02×10⁻¹² MpOH of solution =?pOH = -Log [OH⁻]
pOH = -Log 1.02×10⁻¹²
pOH = 11.99
Thus, from the above calculation, we can conclude that the pOH of the solution is 11.99
Learn more about pOH:
https://brainly.com/question/14023417
#SPJ1
The electrolysis of molten AlCl3 for 2.50 hr with an electrical current of 15.0 A produces ________ g of aluminum metal. Group of answer choices
Answer:
The correct answer is 12.58 grams.
Explanation:
Based on the given information, the electrolysis equation will be,
Al³⁺ + 3e⁻ ⇔ Al
1 mol of Al needs 3 moles of electron, and the value for 1 mole of electron is 96485 C.
Thus, 1 mole of Al needs 3 × 96485 C = 289455 C
Now the amount of charge passed is,
T = 2.5 hours
= 2.5 × 3600 s = 9 × 10³ s
Q = Current × Time
= 15A × 9 × 10³ s
= 13.5 × 10⁴ C
The moles of Al plated will be,
= 13.5 × 10⁴ / 289455
= 0.4664 mol
The molecular mass of Al is 26.98 grams per mole
Now the mass of Al will be,
= Number of moles × Molecular mass
= 0.4664 × 26.98
= 12.58 grams
1. What is the oxidation state of iron in FeC2O4
Answer:
+2
Explanation:
I am first with correct answer
Answer:
the oxidation state of iron in FeC2O4 is +2
What is the relationship between the magnitude of Δ (crystal-field splitting energy for an octahedral crystal field) and the energy of the d-d transition for a d1 complex?
a. The energy of the d-d transition is four times as big as Δ.
b. Δ is twice as big as the energy of the d-d transition.
c. Δ is four times as big as the energy of the d-d transition.
d. Δ is equal to the energy of the d-d transition.
e. The energy of the d-d transition is twice as big as Δ.
Answer:
B
Explanation:
What is Hall-Heroult process?
Answer:
... Sorry I don't know the answer
If the copper ion just GAINED electrons,
which process did it go through?
Reduction or
Oxidation
A 0.200 M solution of a week acid, HA, is 9.4% ionized. The molar concentration of H+ is 0.0188 M. the Acid-dissociation constant, Ka, for HA is...?
We are given:
Initial concentration of HA: 0.200 Molar
The acid is 9.4% ionized
Dissociation constant (α) = (Percent Ionized) / 100 = 0.094
Molar concentration of H+ = 0.0188
Let's Chill! (making the ICE box):
Reaction: HA ⇄ H⁺ + A⁻
Initial: 0.200M - -
Equilibrium: 0.200(1-α) 0.200α 0.200α
while we're here, let's confirm the given equilibrium concentration of H⁺ ions
from the table here, we can see that the equilibrium concentration of H⁺ ions is 0.200α, we know that α = 0.094
[H⁺] = 0.200α = 0.200 * 0.094 = 0.0188 M
which means that we're on the right track
We're basically scientists at this point (finding the dissociation constant):
Acid dissociation is nothing but the equilibrium constant, but for the dissociation of Acids
From the reaction above, we can write the equation of the acid dissociation constant:
Ka = [H⁺][A⁻] / [HA]
now, let's take the values from the 'equilibrium' row of the ice box the plug those in this equation
Ka = (0.200α)(0.200α) / [0.200(1-α)]
Ka = (0.200α)²/[0.200(1-α)]
plugging the value of α
Ka = (0.200*0.094)² / [0.200(0.906)]
Ka = (0.0188)² / 0.1812
Ka = 1.95 * 10⁻³
PLEASE HELP ME!!!!
TRUE or FALSE: When sperm and egg cells combine in fertilization, the
offspring ends up with the same number of chromosomes as their
parents.
Answer: False
Explanation:
Hope this help
Answer:
True.
Explanation:
Every child will contain the same number of chromosomes as the parents (otherwise they wouldn't be considered the same species). Additionally, animals can only mate with a species containing the same number of chromosomes as themselves. This means if the offspring of the parents had a different number fo chromosomes the offspring would be unable to mate with animals of it's own species.
Which of these is an ion with a charge of 1+?
compare and contrast the three types oflevers.
Answer:
The difference between the three classes depends on where the force is, where the fulcrum is and where the load is. In a first class lever, the fulcrum is located between the input force and output force. In a second class lever, the output force is between the fulcrum and the input force. write the class of lever.
Explanation:
Brainiest and 10 points
Which has MORE energy?
A. Radio
B. Infrared
Answer:
B. infrared
hope this helps
have a good day :)
Explanation:
Determine the molarity and mole fraction of a 1.09 m solution of acetone (CH3COCH3) dissolved in ethanol (C2H5OH). (Density of acetone
Answer:
Molarity = 0.809 M
mole fraction = 0.047
Explanation:
The complete question is
Calculate the molarity and mole fraction of acetone in a 1.09-molal solution of acetone (CH3COCH3) in ethanol (C2H5OH). (Density of acetone = 0.788 g/cm3; density of ethanol = 0.789 g/cm3.) Assume that the volumes of acetone and ethanol add.
Solution -
Solution for molarity:
1.09-molal means 1.09 moles of acetone in 1.00 kilogram of ethanol.
1)
Mass of 1.09 mole of acetone
= 1.09 mol x 58.0794 g/mol = 63.306 g
Density of acetone = 0.788 g/cm3
Thus, volume of 1.09 moles of acetone = 63.306 g/0.788 g/cm3 = 80.34 cm3
For ethanol
1000 g divided by 0.789 g/cm3 = 1267.427 cm3
Total volume of the solution = Volume of acetone + Volume of ethanol = 80.34 cm3 + 1267.427 cm3 = 1347.765 cm3 = 1.347 L
a) Molarity:
1.09 mol / 1.347 L = 0.809 M
Mole Fraction
a) moles of ethanol:
1000 g / 46.0684 g/mol = 21.71 mol
b) moles of acetone:
1.09 / (1.09 + 21.71) = 0.047
the solubility of alcohol decrease with increasing numbers of carbon atom explain
Explanation:
bdjdiififjc mfkxkdkd has also had a good time in the
If the specific heat capacity of copper is 387 J/kg/°C, then how much energy is needed to raise the temperature of 400 g of copper from 30°C to 55°C?
Answer:
Explanation:
mass = 400 grams * [1 kg/1000 grams] = 0.400 kg
c = 387 Joules / (oC * kg)
Δt = 55 - 30 = 25 oC
E = m*c * Δt
E = 0.4 * 387 * 25
E = 3870 Joules
Which atom has the smallest atomic radius between cesium, potassium, rubidium, and francium?
Congratulations you have worked hard and now you are done with the year! I am so proud of you!
Answer:
lololol
Explanation: