Write a program that prompts the user to enter an oligonucleotide sequence, such as TATGAGCCCGTA.

If the user entered a valid oligo sequence consisting only of the characters A, C, G, or T, the program should then display the reverse complement of that sequence, in this case TACGGGCTCATA, along with text indicating that it is the reverse complement .

After displaying the reverse complement, the program should then prompt the user to enter another sequence. The program should continue this pattern of prompting the user for a new oligo sequence and displaying its reverse complement until the user enters a sequence with at least one character that is invalid (i.e. a character other than A, C, G, or T).

Answer: the room had been dark, she had not been able to see him clearly

Explanation:

The word FANCIED means desire or  fancied would mean supposed, believed, or imagined.

So it means that she might think that the shadow (assuming the shadow was a person who was invisible) was just her imagination or hallucination but in reality, the shadow (invisible person) tricked her.

_________________

Brainliest would be greatly appreciated!

_________________

#SpreadTheLove

#SaveTheTrees

- Mitsu JK

Answer:

Following are the responses to the given question:

Explanation:

The subnet mask /25 could be the host 128 hosts.

The subnet mask /26 could be the host 64 hosts.

The subnet mask /27 could be the host 32hosts.

The subnet mask /28 could be the host 16 hosts.

The subnet mask /29 could be the host 8 hosts.

The subnet mask /30 could be the host 4 hosts.

It is based on the requirement in which I have been using /25,/27,/28,/29 subnet masks on the basis of the usable slots.

Answer:

Project managers use status reports to keep stakeholders informed of progress and monitor costs, risks, time and work. Project status reports allow project managers and stakeholders to visualize project data through charts and graphs.

Answer:

b. b1.equals(b2)

Explanation:

The question has a missing source file (which can be found online).

The function that compares b1 and b2 is:

public boolean equals(Object other) {

if (other == null) {

return false; }

Backyard b = (Backyard) object;

return (length == b.getLength() && width == b.getWidth());

}

Using the function definition, we have:

equals(Object other)

This implies that, the first object will be compared to the second, using the function name.

i,e,

b1.equals(b2)

Hence (b) is correct

In this exercise we have to use the knowledge in computational language in C++ to describe a code that best suits, so we have:

The code can be found in the attached image.

To make it simpler we can write this code as:

public boolean equals(Object other) {

if (other == null) {

return false; }

Backyard b = (Backyard) object;

return (length == b.getLength() && width == b.getWidth());

}

This program will result in the following missing variable:

b1.equals(b2)

See more about C++ at brainly.com/question/19705654

Answer:

The main industries in Sierra Leone are: Diamond mining

Petroleum refining

Small - scale manufacturing (beverage, textiles,footwear)

Explanation:

They also engage in commercial ship repair

Answer:

"Hypertext links are those words that take you from one web page to another when you click them with your mouse. Although the same HTML tag you study in this hour is also used to make graphical images into clickable links, graphical links aren't explicitly discussed here" I got this from https://www.informit.com/articles/article.aspx?p=440289 sorry I couldnt take the time myself here to help :(

Explanation:

Answer:

a

Explanation:

im smart

Desk checking is a method to check the logic of an algorithm by manually working through it. There are many reasons for Desk Checking that may be omitted or simplified.

If the current program’s logic is identical, then this step may be omitted; this, however, implies some effort to verify “sameness.” If truly identical, perhaps there is re-usable code, or the code to be developed should become a reusable library routine.

Link testing is the testing of the group of modules in order to ensure that the modules operate correctly in combination. It generally verifies that the function or operation is executed properly. System testing is a type of testing that is used to confirm the actual function of the system in which a work is executed or performed.

Therefore, all of the testing mechanisms are well described above.

To learn more about System and link testings, refer to the link:

https://brainly.com/question/7658665

#SPJ2

Answer:

ctrl p I gusse hop it helps

bye know have a great day

Explanation:

Answer:

The table is formed as attached figure.

Explanation:

Subnets can use specific number of hosts so /25 can host 128 hosts, reducing by a factor of 2 leading to /30 as with only 4 hosts. Thus the subnets are alloted as indicated in the attached image.

Answer: the answer si b . form detail

Explanation

Answer:

the answer is b . form detail

Explanation:

Explanation:

Required tools and components:

Soldering iron

Solder

Flux pen

Fine gauge solder (23 gauge or finer)

Wire cutter

MAX31855 thermocouple interface chip (available directly from Maxim Integrated)

Thermocouple with junction suitable for your application (e.g., probe, washer, etc.)

J-type (-40°C to +750°C)

K-type (-200°C to +1350°C)

T-type (-200°C to +350°C) Solid state relay (will depend on your application)

USB FTDI 5V cable (Note: A single cable can be used for many different microcontroller projects)

Computer with Arduino IDE v1.0

Wall-wart 9V/1.5A, 2.1mm center positive

Answer:

false and it's a recent technology

it is B) terminal bc There are several different types of computer networks. Computer networks can be characterized by their size as well as their purpose

I think it is True not sure but try it

Answer:

Pros: Experts are there to help, Help can be found almost 24 hours of the day so you don't have to wait for an expert to be available, easier to ask more in detail.

Cons: Answers may not always come quickly, there is no face to face interaction so you dont know how legit the person is, some advice may be incorrect or old.

Explanation:

Answer:

The Perl code is attached in the attachment. The execution time for using hashes is 0 seconds while that for without hash is 27 seconds.

Explanation:

In terms of ease of access and readability, both approaches are similar. However, it is evident from the time of execution that the with hashes is more efficient than the value of without hashes. This indicates that using hashes is more efficient.

Answer:

True?

Explanation:

Answer:

The answer is false.

Explanation:

A “#” doesn’t do that in Python.

Answer:

just drop out that the easiest solution

Answer: Review

Because you want to review the comments

Answer:

C.) Reivew

Explanation:

Doing it on EDG now!

Best luck to yall :3

Have a good day and byee

Answer: C

Explanation:

Answer:

The function is as follows:

def compare_prefix(strX,strY):    

   prefix=set()

   for i in range(len(strX)):

       for j in range(i+1,len(strX)):

           chk =strX[i:j+1]

           if chk in strY:

               prefix.add(chk)

   sort_prefix = sorted(prefix)

   rev_sort_prefix = sorted(prefix,reverse=True)

   return(sort_prefix,rev_sort_prefix)

Explanation:

This defines the function

def compare_prefix(strX,strY):    

This creates an empty set, prefix

   prefix=set()

This iterates through each character in strX

   for i in range(len(strX)):

This iterates through every other character in strX

       for j in range(i+1,len(strX)):

This gets the prefix of strX by concatenating strings from i to j + 1

           chk =strX[i:j+1]

This checks if the prefix is in strY

           if chk in strY:

If yes, the string is added to set prefix

               prefix.add(chk)

This sorts prefix

   sort_prefix = sorted(prefix)

This reverses the sorted prefix

   rev_sort_prefix = sorted(prefix,reverse=True)

This returns the sorted and reversed prefix

   return(sort_prefix,rev_sort_prefix)

Answer:

Each router builds a cost-weighted graph of the network of all the routers and the shortest links between them, based on information received from each router regarding only its nearest neighbors.

Explanation:

A routing protocol can be defined as a set of defined rules or algorithms used by routers to determine the communication paths unto which data should be exchanged between the source router and destination or host device.

Additionally, in order for packets to be sent to a remote destination, these three parameters must be configured on a host.

I. Default gateway

II. IP address

III. Subnet mask

After a router successfully determines the destination network, the router checks the routing table for the resulting destination network number. If a match is found, the interface associated with the network number receives the packets. Else, the default gateway configured is used. Also, If there is no default gateway, the packet is dropped.

Basically, there are two (2) main categories of routing protocols used in packet switching networks and these includes;

1. Distance-vector routing.

2. Link state routing.

Link state routing refers to a complex routing technique in which each router learns about it's own neighborhood or directly connected networks (links) and shares the information with every other router present in the network.

Hence, the statement which best describes Link State routing is that, each router builds a cost-weighted graph of the network of all the routers and the shortest links between them, based on information received from each router regarding only its nearest neighbors. Some examples are intermediate system to intermediate system (IS-IS) and open shortest path first (OSPF).

Answer:

A “breadcrumb” (or “breadcrumb trail”) is a type of secondary navigation scheme that reveals the user's location in a website or Web application. The term comes from the Hansel and Gretel fairy tale in which the two title children drop breadcrumbs to form a trail back to their home.

Explanation:

A breadcrumb or breadcrumb trail is a graphical control element frequently used as a navigational aid in user interfaces and on web pages. It allows users to keep track and maintain awareness of their locations within programs, documents, or websites. Breadcrumbs make it easier for users to navigate a website – and they encourage users to browse other sections of the site. ... You head to their site and end up on The Nestle company history page. Using their breadcrumbs, you can easily navigate back to About Us, History, or even their home page.

Answer:

click on the link

Explanation:

link is somewhere hidden

I think

the hamming distance between the following bits its 5

Answer:

The five rules are described as follows:

Rule A permits the inbound Simple Mail Transfer Protocol (SMTP) connection.

Rule B permits the inbound Simple Mail Transfer Protocol (SMTP) connection.

Rule C permits the outbound Simple Mail Transfer Protocol (SMTP) connection.

Rule D permits the outbound Simple Mail Transfer Protocol (SMTP) connection.

Rule E does not perform any action. Thus it is when the action is denied.

Explanation:

Rule A allows information transfer of the incoming email from the external server to the internal remote server, thus this allows an inbound connection.

Rule B allows information transfer of the incoming email from the remote server to the external remote server, thus this allows an inbound connection.

Rule C allows information transfer of outgoing email from the external server to the internal remote server, thus this allows an outbound connection.

Rule D allows information transfer of the outgoing email from the remote server to the external remote server, thus this allows an outbound connection.

Rule E does not allow any action in either direction thus it is when action is denied.

Answer:

attenuation is the third one

Answer:

Explanation:

#!/bin/bash

# This script can be used to create simple chroot environment

# Written by LinuxConfig.org  

# (c) 2020 LinuxConfig under GNU GPL v3.0+

#!/bin/bash

CHROOT='/var/chroot'

mkdir $CHROOT

for i in $( ldd $* | grep -v dynamic | cut -d " " -f 3 | sed 's/://' | sort | uniq )

 do

   cp --parents $i $CHROOT

 done

# ARCH amd64

if [ -f /lib64/ld-linux-x86-64.so.2 ]; then

  cp --parents /lib64/ld-linux-x86-64.so.2 /$CHROOT

fi

# ARCH i386

if [ -f  /lib/ld-linux.so.2 ]; then

  cp --parents /lib/ld-linux.so.2 /$CHROOT

fi

echo "Chroot jail is ready. To access it execute: chroot $CHROOT"

Answer:

The program in Java is as follows:

import java.util.*;

public class Main{

public static void main(String[] args) {

 Scanner input = new Scanner(System.in);

 String [] salsa = {"Mild","Medium","Sweet","Hot","Zesty"};

 int [] number = new int[5];

 for(int i = 0;i<5;i++){

     System.out.print(salsa[i]+" number: ");

     number[i] = input.nextInt();

 }

 for(int i = 0;i<5;i++){

     System.out.println(salsa[i]+" : "+number[i]);

 }

 int smallest = number[0];  int highest = number[0];

 int count = 0;

 for(int i = 0;i<5;i++){

     if(smallest > number[i]){

         smallest = number[i];

         count = i;

     }

 }

 System.out.println("Smallest");

 System.out.println(salsa[count]+" : "+smallest);

    for(int i = 0;i<5;i++){

     if(highest < number[i]){

         highest = number[i];

         count = i;

     }

 }

 System.out.println("Highest");

 System.out.println(salsa[count]+" : "+highest);

}

}

Explanation:

This initializes the salsa names

 String [] salsa = {"Mild","Medium","Sweet","Hot","Zesty"};

This declares the array for the amount of salsa

 int [] number = new int[5];

This iterates through the 5 salsas and get input for the amount of each

 for(int i = 0;i<5;i++){

     System.out.print(salsa[i]+" number: ");

     number[i] = input.nextInt();

 }

This prints each salsa and the amount sold

 for(int i = 0;i<5;i++){

     System.out.println(salsa[i]+" : "+number[i]);

 }

This initializes smallest and largest to the first array element

 int smallest = number[0];  int highest = number[0];

This initializes the index of the highest or lowest to 0

 int count = 0;

The following iteration gets the smallest of the array elements

 for(int i = 0;i<5;i++){

     if(smallest > number[i]){

         smallest = number[i];

This gets the index of the smallest

         count = i;

     }

 }

This prints the smallest

 System.out.println("Smallest");

 System.out.println(salsa[count]+" : "+smallest);

The following iteration gets the largest of the array elements    

for(int i = 0;i<5;i++){

     if(highest < number[i]){

         highest = number[i];

This gets the index of the highest

         count = i;

     }

 }

This prints the highest

 System.out.println("Highest");

 System.out.println(salsa[count]+" : "+highest);