write a for loop to print all num vals elements of array hourlytemp. separate elements with a comma and space. ex: if hourlytemp

Allow workers to go without the necessary safety gear.

To learn more about Steel Mill Inc. refer to:

https://brainly.com/question/29426067

#SPJ4

The following are the steps to design a double-reduction gear train:

What is reduction?

Reduction is the process of decreasing something or making it smaller in size, amount, degree, or value. It is a fundamental concept in mathematics and economics, but it can also be applied to any type of process, from manufacturing to philosophy.

Reduction can refer to a process of simplification, a change in complexity, or a decrease in the amount of material needed or used. Examples of reduction include reducing the number of steps in a process, reducing the amount of data used to make a decision, or reducing the cost of production. In many cases, reduction can be used to improve efficiency and productivity, or to create a more sustainable system.

1. Determine the gear ratio: The gear ratio is the number of teeth on the input gear (a) divided by the number of teeth on the output gear (C). In this case, the gear ratio would be 1176/324 = 3.65.

2. Calculate the input The following are the steps to design a double-reduction gear train:

1. Determine the gear ratio: The gear ratio is the number of teeth on the input gear (a) divided by the number of teeth on the output gear (C). In this case, the gear ratio would be 1176/324 = 3.65.

2. Calculate the input torque: The input torque is the product of the input power and the speed of the input shaft, or InPwr*InSpd. In this case, the input torque is 20*1176 = 23520 in-lbs.

3. Determine the output torque: The output torque is the product of the output power and the speed of the output shaft, or OutSpd*Ang. In this case, the output torque is 324*25 = 8100 in-lbs.

4. Calculate the center distance: The center distance is the distance between the center of the input gear and the center of the output gear. This distance is determined by the number of teeth on the gears, the gear ratio, and the pitch of the gears. In this case, the center distance is 11/(√3.65) = 6.45 inches.

5. Determine the shaft size and bearing size: The shaft size is determined by the torque rating of the shaft and the bearing size is determined by the shaft size. In this case, the shaft size would be 2.50E+08 in-lbs and the bearing size would be 11/2 inches.

6. Design the gears: The gears must be designed to fit the shaft size and bearing size. The number of teeth on the gears must match the gear ratio. In this case, the input gear would have 1176 teeth and the output gear would have 324 teeth.

7. Assemble and test the gear train: Finally, the gear train must be assembled and tested to ensure that it meets the design parameters.

To learn more about reduction
https://brainly.com/question/14531814
#SPJ4

The correct answer is MATLAB CODE for design envelope detector for demodulating AM signal

An electrical circuit known as an envelope detector, sometimes known as a peak detector, receives an input of a (relatively) high-frequency amplitude modulated signal and outputs the original signal's demodulated envelope. By mulitpiling the carrier and message signals, AM is achieved. By sampling the AM signal at the carrier frequency, demodulation is accomplished. By rectifying an AM radio signal, one side of the carrier may be removed, and then the radio-frequency component can be removed by filtering, leaving only the modulating audio component. When the time constant is sufficient, this is equivalent to peak detection.

To learn more about AM signal click the link below:

brainly.com/question/2192758

#SPJ4

If Ellie is elected without debating the incumbent, then Herbie will not be elected as he has not had the chance to debate the incumbent.

What do you mean by incumbent?

Incumbent is a term often used in politics and business to refer to a person who holds an office or position. In politics, it refers to the person currently in office, such as the current president or prime minister. In business, it refers to the current holder of a position, such as the CEO or chairman of a company. It can also refer to the current holder of any title or position.

The use of the term incumbent Incumbent is a term often used in politics and business to refer to a person who holds an office or position. In politics, it refers to the person currently in office, such as the current president or prime minister. In business, it refers to the current holder of a position, such as the CEO or chairman of a company. It can also refer to the current holder of any title or position.

The use of the term incumbent suggests that the holder of the position has a certain that the holder of the position has a certain authority or status. This can be used to indicate the importance of a position, or to emphasize the current holder's qualifications. It can also be used to refer to someone who has an advantage in a particular situation.

However, if Herbie does debate the incumbent without being elected, then he may still be able to gain more support from the voting public and even potentially win the election.

To learn more about incumbent
https://brainly.com/question/28995570
#SJP4

Thus external torque is -146.76 Nm and it is clockwise

Scalar moment = load × moment arm

Load acting on the body is due to HAT and object

External torque on joint is

[(HAT load) × (HAT moment arm)] + [(object load) × (object moment arm)]

(both moments are in clockwise direction)

Or external torque = -[(333 × 0.22) + (245 × 0.3)] = -146.76 Nm

Thus external torque is -146.76 Nm and it is clockwise.

This is so because the force and speed of the pistons' motion determine the torque. High levels of this torque force can be produced by the fastest cars at relatively low rpm. This enables speedy acceleration of the vehicle. The definition of torque is rF=rFsin(r). In other terms, torque is the cross product of the force vector and the distance vector, where 'a' is the angle between r and F. The distance vector represents the distance from the pivot point to the place where force is applied.

Learn more about torque here:

https://brainly.com/question/6855614

#SPJ4

It is true that material requirements planning (mrp) converts the master production schedule into the needs for parts, subassemblies, and raw materials.

To learn more about Material requirements planning (mrp) refer to:

https://brainly.com/question/14969752

#SPJ4

A static method (or static function) is a method that is declared as a member of an object but can only be accessed from the constructor of an API object, not from an instance of the object generated using the constructor.

Rather of being an instance of a class, a static method in Java is a method that is a part of the class itself. The method is available to each instance of the class. Without requiring the class's object, static methods have access to class variables (static variables) (instance). A static method can only access static data. A static method in Java is a method that is part of the class, not an instance of the class. Instead of using a class object, static methods are called by the class name. There should be a common piece of code shared by all instance methods (although you could still have an instance method for that).

To learn more about static method click the link below:

brainly.com/question/13098297

#SPJ4

Electric circuits and magnetic circuits are similar. The following list includes some of the numbers. Electric Circuit Magnetic Circuit.

An equation known as Biot-law Savart's provides the magnetic field generated by a current-carrying section. This section is considered to be the current element, a vector quantity.

Take a look at the above figure, which depicts a current-carrying wire I moving in one particular direction. Select a brief section of wire measuring ds in length. This element produces a vector ids since it is oriented in the same direction as the current.

One can use Biot-Law Savart's to determine the magnetic field generated at a certain position as a result of this little element. Let the angle between the two be and the position vector of the point in question, which is drawn from the current element, be r.

Know more about element here:

https://brainly.com/question/13581933

#SPJ4

The type of wrench that surrounds and grips all corners when loosening and tightening bolts and nuts is known as box-ends.

Wrenches are significantly used for loosening and tightening of fasteners. These are typically a kind of tool that is used to provide grip and mechanical advantage in applying torque to turn objects—usually rotary fasteners, such as nuts and bolts—or keep them from turning.

According to the context of this question, there are basically two major kinds of wrenches: Pipe wrenches used in plumbing for gripping round (cylindrical) things. General-use wrenches are used on nuts and bolts that have flat, parallel surfaces; e.g., square or hexagonal (hex).

Therefore, box-ends are a type of wrench that surrounds and grips all corners when loosening and tightening bolts and nuts.

To learn more about Technological tools, refer to the link:

https://brainly.com/question/25860017

#SPJ1

Thermal limit establishes a short line's loadability.

What Constrains the Capability of Loading? Thermal: The ground clearance, conductor condition, ambient temperature, wind speed, and wind direction all affect an overhead line's thermal capacity. Due to the unstable environment and the history of loading, it may vary by a factor of 2 to 1.

By moving the blinder closer to the origin, the increase in loadability can be controlled. Only when the measured impedance falls between the relay's mho characteristic and the two blinders will the relay trip. Along the load line, the increase in loadability can be measured.

To know more about loadability visit :-

https://brainly.com/question/13521443

#SPJ4

The inlet pipe to the pump is 6.0-cm diameter steel, 8.5 m in length

What is diameter ?

Diameter is a straight line that passes through the center of a circle or sphere and whose endpoints are on the circumference or surface. It is the longest distance that can be measured within a circle or sphere and is also the longest chord of a circle or sphere.

Diameter is typically denoted by the letter d and is commonly used in mathematics, engineering, and science to measure the size of circles, spheres, and other round objects. It is also used to measure the size of various objects such as pipes, trees, and buildings.

a) The flow rate through the system is 0.0054 gal/min.

b) determine the total equivalent length of the system, in m. The total equivalent length of the system is 18.4 m.

To learn more about diameter
https://brainly.com/question/28446924
#SPJ4

Answer:

c.revolutionary

Explanation:

"Revolutionary" is not a type of software prototyping. Software prototyping is the process of creating a preliminary model or version of a software program to test its functionality and gather feedback. There are several different types of software prototyping, including static, throwaway, and incremental, but "revolutionary" is not one of them.

The Maximum Shear Stress Theory underpins the maximum shear stress criterion, also known as the Tresca yield criterion.

According to this theory, a material will fail when the absolute maximum shear stress (tau max) reaches the stress that causes the material to yield in a simple tension test. For ductile materials, the Maximum shear stress criterion is used.

What is simple tension test?

A sample is typically pulled to its breaking point in a simple tensile test to determine the ultimate tensile strength of the material. Throughout the test, the amount of force (F) applied to the sample and its elongation (L) are measured. Stress (force per unit area), and strain (percent change in length, ) are two terms that are frequently used to describe material properties.

To learn more about simple tension/tensile test, visit: https://brainly.com/question/24002168

#SPJ4

Deadlock may or may not result from an unsafe condition; the only thing that is certain is that deadlock cannot be completely ruled out.

Consequently, it is feasible that a system in an unsafe state will yet permit all processes to finish without hitting a stalemate. Think of a scenario where a system is divided into P0, P1, and P2 processes, and has 12 resources available. Following is the policy that determines how the resources are distributed:

Max Need right now

P0 10 5 5\sP1 4 2 2\sP2 9 3 6

There are two resources accessible right now. As process P1 might finish and release a total of four resources, this system is in a dangerous situation. However, we can't promise that steps P0 and P2 will succeed. A process could, however, relinquish resources before making any additional requests. Process P2, for instance, may make a resource available.

Learn more about Unsafe here:

https://brainly.com/question/1432746

#SPJ4

If there is a problem with the differential case or the ring gear itself, it can be an indicator of whether or not to reuse a ring gear or replace the ring gear.

What is indicator?
The indicator is a typical "auxiliary" instrument whose function is to give a human readable indication of the an instrument signal. Sometimes, process transmitters simply transmit a basic instrument message (4 to 20 mA, etc.) to the another device without having readouts for the variable they are measuring. For example, a level transmitter installed on a large tank will display the level value to the operator just at bottom of the tank utilising indicators as well as loop-powered devices. In some cases, we may need an additional local display to show the process value to a operators. Without needing to connect test equipment, an indicator provides a human operator with a convenient way to see what the transmitter's output is.

If the case is damaged, such as if it has been bent or cracked, it should be replaced. If the ring gear is damaged, such as if it has been chipped or scored, it should also be replaced. If the ring gear is worn but not visibly damaged, it may be possible to reuse it as long as it is inspected and properly re-torqued.

To learn more about indicator
https://brainly.com/question/29664056
#SPJ4

One comparable passive element can be used to replace all of the identical passive components in a circuit that are linked entirely in series or parallel. This circuit is hence referred to as an equivalent circuit.

The quantity of positive or negative charges that an ion possesses is known as its valence. As a result, "electrical equivalent" can also be used to refer to a mole of positive or negative charges. Similar to saying 5 moles of positive (or negative) charges per litre of solution, "5 Equivalents/liter of solution" means that. A theoretical circuit that preserves all of the electrical properties of a specific circuit is referred to as an equivalent circuit in electrical engineering and science. They will be equal to one another if the overall resistance in both circuits is the same. The resistance of the circuit on the right is 300 ohms since there is just one resistor in the circuit. Two resistors are linked in series in the circuit on the left.

To learn more about equivalent circuit click the link below:

brainly.com/question/15977074

#SPJ4

The correct option is d) tmp = a/(nothing). A free service called "temp mail" enables users to receive emails at any random temporary address.

Temps or Temps can mean: Temporary file for temperature, in computing, file for the moment, a transient variable, Audio used during editing for TV and film production is known as a "temp track," "temp score," or "temp music." A temp is someone who works on a temporary basis. Temporary refers to a length of time that a person whose exact lifespan is unknown spends. Russian Kotelny Island's Temp (air base). A meteorological code for upper air soundings is TEMP (meteorology). Plan for testing and assessment in project management, Persol Holdings, a Japanese human resource management firm that was formerly known as Temp Holdings, RT-21 Temp 2S, a Soviet intercontinental ballistic missile, and TR-1 Temp, a Soviet mobile theatre ballistic missile

Learn more about temp here

https://brainly.com/question/25792566

#SPJ4

What code for XXX, YYY correctly swaps a and b? Choices are written as XXX / YYY.

XXX;

a = b;

YYY;

b = tmp;

Question options:

a) tmp = a / (nothing)

b) tmp = a / tmp = b

c) tmp = b / (nothing)

d) (nothing) / tmp = a

The discharge rate of the supply of water to the roof top is;

V' = 9.8641 L/s

The conditions given to us are;

- Water goes in atmosphere and so; p₂ = p_atm

- Velocity at point 1 is very small and so; V₁ ≈ 0

- Reference level is point 1

- Difference between pressures p₁ and p₂ is gauge pressure;

p_gauge = p₁ - p_atm

- There is no turbine and pump

From the conditions above, we can say that the Velocity V₂ can be gotten from the expression;

(p₁ - p_atm)/(ρg) + 0 + 0 + 0 = (V₂²/2g) + h + 0 + h_L

Making V₂ the subject gives us;

V₂ = √[(2p₁_gauge)/ρ - 2g(h + h_L)]

We are given;

p₁_gauge(air pressure in the tank)  = 300 KPa = 300000 Pa

ρ(density of water) = 1000 kg/m³

h (height above the water tank level) = 8 m

h_L(head loss) = 2 m

Thus;

V₂ = √[(2 * 300000/1000) - 2(9.8)(8 + 2)]

V₂ = 20.095 m/s

The discharge rate of the supply of water to the roof top is given by the formula;

V' = A₂ * V₂

Where A₂ is cross sectional area of pipe = πr² = π * (2.5/200)² = 4.90874 * 10⁻⁴ m²

Thus;

V' = 20.95 * 4.90874 * 10⁻⁴

V' = 9.8641 L/s

Read more about Discharge Rate at; https://brainly.com/question/19475319

#SPJ1

For a brick veneer that bears on the foundation and continues to the top of the building without any intermediate bearing support, the maximum veneer height is limited to 30 ft.

Veneer (English for Furnier) or Verblendschale is a thin, light-transmitting ceramic covering for the teeth that is applied to the dental surface, particularly on front teeth, using specialty adhesive. The use of ceramic veneers often has no health risks, save from rare allergic reactions to the befestification material, as the ceramic material has a very high biocompatibility. Problems only arise with extensively fluoridated dental paste. Additionally, the necessary integration measures raise the possibility of chronic pulmonitis (Zahnmarkentzündung), which the doctor must disclose. Veneers can be used to fix minor dental issues such gaps in the teeth, discoloured teeth, and localized blemishes. Veneers provide teeth's visible surfaces with an improved appearance. Usually, when they are used, old plastic fillers or corner builders are removed.

Learn more about veneer here

https://brainly.com/question/14448389

#SPJ4

Urbanization increases the amount of impervious surface in a given area, which often slows down hydrologic response time and so raises the danger of flooding.

While impermeable rocks prevent water from passing through pores and fissures, permeable rocks do. Because there is more surface run-off when a valley is built of impermeable rocks, flooding is more likely. excessive rain. arriving ocean waves, such as a storm surge. ice jams, melting snow, and melting ice. Levees or dams breaching India is unique in that the monsoon season brings with it a lot of rain. Numerous rainy weather systems can also be found elsewhere. Coastal communities and villages may also be impacted by storm surges. Dams can have serious consequences when water is released suddenly or when it is not released at all.

To learn more about Urbanization click the link below:

brainly.com/question/14467886

#SPJ4

The device that let employees enter buildings and restricted areas and access secured computer systems at any time, day or night is generally referred to as B. badge readers.

Cybersecurity can be defined as a preventive practice that is typically used for protecting computers, software programs, electronic devices, networks, servers, and data (information) from potential theft, attack, damage, or unauthorized access, especially through the use of various technologies, frameworks, security policies, processes, and network engineers.

In Cybersecurity, a badge reader can be defined as an electrical and mechanical device that is designed and developed to avail an individual the ability to enter buildings (doors), restricted areas, and access data that are stored on secured computer systems.

Read more on cybersecurity here: https://brainly.com/question/28004913

#SPJ1

Complete Question:

Which of these are devices that let employees enter buildings and restricted areas and access secured computer systems at any time, day or night?

A. Scanners

B. Badge readers

C. Card readers

When a network is connected using a physical bus topology and a cable that connects a workstation to the bus breaks then no devices will be able to communicate.

What is a bus topology?

A type of network design known as bus topology, often referred to as line topology, connects all devices in the network with a single coaxial or RJ-45 network wire. The term "bus," "backbone," or "trunk" refers to the single wire that connects all of the devices and transmits all of the data.

Bus topology is one of the simplest physical topologies used in networks, according to the definition. Famously, the Local Area Network uses the bus topology. All of the nodes in this topology are linked together by a single wire known as the "Backbone."

To learn more about a bus topology, use the link given
https://brainly.com/question/13501206
#SPJ4

Answer:

MATLAB function:

function dosageAmount=CalculateDosage(userWeight)

% user weight is in kg

dosageAmount=0;

% clears the variable dosageAmount

if userWeight<50

dosageAmount=10;

elseif userWeight <= 140

dosageAmount=20;

else

dosageAmount=30;

end

end

Code: >> CalculateDosage(65)

Refer to the image for more

Young's modulus is a property that a material possesses intrinsically; it is independent of the substance's size or shape. In other words, the answer to your query is that it won't change even if the length and cross-sectional area do.

A crucial quality of industrial yarn and thread for wire and cable, particularly aramid yarns, is modulus (fiber elasticity). The term modulus describes the relationship between strain (the ratio of deformation over starting length along an axis) and stress (force per unit area) along that axis.

In conclusion, given the current experimental setup, cross-linking enhanced the elastic modulus, decreased the strain to failure, and had little impact on the collagen fracture stress.

Learn more about elasticity modulus here:

https://brainly.com/question/9980429

#SPJ1

The number average of molecular weight (Mn) for that distribution is 281,250.

Ni = Number of molecules in order i

Mi = Molecular mass in order i

Number average of molecular weight or Mn is a average molecular weight for each individual macromolecules. Number average of molecular weight or Mn can be calculated with this formula,

[tex]\bar{M_n}[/tex] = [tex]\frac{\sum{M_iN_i}}{\sum{N_i}}[/tex]

= (2*100,000+4*200,000+6*300,000+3*400,000+1*500,000)/(2+4+6+3+1)

= 281,250

Thus, the number average of molecular weight is 281,250 for that distribution.

Learn more about molecular here:

brainly.com/question/26388921

#SPJ4

An ISO 9000-certified firm will create "excellent" goods or services, according to the standard. Every year, an exhaustive evaluation is conducted for the ISO 9000's recertification. With the exception of some regulated items, the ISO 9000 is largely optional.

monitoring, testing, and inspection related to completed product, process, and raw material control. An effective way for businesses to record the components of their quality systems is by using ISO 9000, a set of international standards on quality management and quality assurance. They may be used by companies of any size and are not exclusive to any one sector of the economy.4 Conformance. Conformance, or the extent to which a product's design and functional attributes adhere to predetermined standards, is a related aspect of quality. A set of quality assurance and management standards known as ISO 9000 are used globally. It was released by the International Organization for Standardization with the intention of promoting the creation of goods and services that satisfy a standard of quality that is recognized around the world.

To learn more about ISO 9000 click the link below:

brainly.com/question/6188356

#SPJ4

The Region of Convergence is the area in the pole/zero plot of the transfer function in which the function exists.

The ROC of the Laplace transform X(s) for a left-sided signal x(t) is Re(s)2, where 2 is a constant. As a result, the ROC of a left-sided signal's Laplace transform lies to the left of the line =2. Receiver Operating Characteristic is what the word "ROC" refers to. Following the assault on Pearl Harbor in the 1940s, ROC curves were initially used to explore discriminator systems for the detection of radio signals in the presence of noise. The area of convergence is the set of values in the z-plane for which the ZT converges (ROC). S is a similar laplace variable, and its ROC is the value at which integration converges.

To learn more about Convergence click the link below:

brainly.com/question/15415793

#SPJ4

In order for analysts to find links between searches, anonymization functions remove specific identifying information from query results, such as last name and phone number, but create some sort of unique identifier.

Data anonymization is the process of obscuring or encrypting identifiers that link a specific person to stored data in order to protect private or sensitive information. For instance, you can use a data anonymization technique to keep the data while obscuring the source for Personally Identifiable Information (PII) like names, social security numbers, and addresses.

Attackers can employ de-anonymization techniques to track the anonymization process even after you have removed all identifiers from the material. De-anonymization procedures can cross-reference the sources and reveal personal information because data typically goes through numerous sources, some of which are accessible to the public.

Know more about Attackers here:

https://brainly.com/question/28232298

#SPJ4