Would an alkaline earth metal make a good replacement for tin in a tin can?

Answers

Answer 1

Answer:

Definitely not. This is because the alkaline earth metal [basically group 2 elements] are reactive and will react with the contents of the can, contaminating it.

Answer 2

No, alkaline earth metals would not be a good replacement for tin in a tin can because alkali from alkaline earth metals react with tin and release hydrogen.

What are alkaline earth metals?

Alkaline earth metals are present in group 2 of the periodic table. They are beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra).

They are called alkaline earth metals because their hydroxide and oxides are highly alkaline. Their metal oxides are found in the earth's crust.

These metals have 2 electrons in their outer shell, and they are highly reactive, so they will react with the tin in a tin can.

Thus, alkali from alkaline earth metals react with tin and generate hydrogen, hence they would not make an acceptable replacement for tin in a tin can.

To learn more about alkaline earth metal, refer to the below link:

https://brainly.com/question/23436350

#SPJ2


Related Questions

A glacier can travel over the surface of Earth and reshape it. The chart describes three things a glacier can do.

Glacial Actions:
1. breaks large rocks into smaller ones
2. pushes broken rocks ahead of itself
3. leaves broken rocks behind when the front edge melts

Which terms BEST describe these glacial actions in the order as presented?

a. weathering, erosion, deposition

b. erosion, chemical weathering, deposition

c. deposition, weathering, erosion

d. chemical weathering, mechanical weathering, erosion

Answers

Answer:

A

Explanation:

If a sample of gas at constant temperature has its pressure doubled, what will happen to its volume?

Answers

Answer:

it'll halve

Explanation:

the gas is compressed with twice the pressure. The volume will be halved.

im certain

Given that the molar mass of NaCl is 58. 44 g/mol, what is the molarity of a solution that contains 87. 75 g of NaCl in 500. ML of solution? Use Molarity equals StartFraction moles of solute over liters of solution EndFraction. 0. 333 M 0. 751 M 1. 50 M 3. 00 M.

Answers

Answer:

D

Explanation:

Given that the molar mass of NaCl is 58.44 g/mol, we want to determine the molarity of a solution that contains 87.75 g of NaCl in 500. mL of solution.

Recall that molarity is given by:

[tex]\displaystyle \text{M} = \frac{\text{ mols solute}}{\text{ liters soln.}}[/tex]

Therefore, we can convert the amount of NaCl in the solution to moles of NaCl and the volume from milliliters to liters:

[tex]\displaystyle \begin{aligned} \text{M} & = \frac{(87.75 \text{ g NaCl})}{(500. \text{ mL soln.})} \cdot \frac{1 \text{ mol NaCl}}{58.44 \text{ g NaCl}} \cdot \frac{1000 \text{ mL soln.}}{1 \text{ L soln.}} \\ \\ & = 3.00\text{ } \frac{\text{mol NaCl}}{\text{ L soln.}} \\ \\ & = 3.00 \text{ M} \end{aligned}[/tex]

Hence, our answer is D.

how many fluid ounces can i take on a plane united

Answers

3.4 ounces

Liquid or gel food items larger than 3.4 oz are not allowed in carry-on bags and should be placed in your checked bags if possible. TSA officers may instruct travelers to separate items from carry-on bags such as foods, powders, and any materials that can clutter bags and obstruct clear images on the X-ray machine.

What are the most of the elements in the periodic table

Answers

Answer:

Most of the elements in the periodic table are metals.

Hope that helps. x

Answer:

Here is your answer,mate!

Explanation:

Metals are the most of the elements in the periodic table.

A) Oxygen
B) water and oxygen
C) water and carbon dioxide
D) water and carbon monoxide

Answers

Answer:

A

Explanation:

this is because combustion is the chemical reaction between surfaces including OXYGEN to generate heat and light in the form of flame

Which elements are the most reactive and why?

Answers

Answer:

Fluorine is identified as the most reactive nonmetal and the most electro-negative element in the periodic table, making it the strongest oxidizing agent. Caesium is the most reactive metal in the periodic table, so much that working with this metal often ends in explosions!

Hydrogen is a very reactive gas, and the alkali metals are even more reactive. In fact, they are the most reactive metals and, along with the elements in group 17, are the most reactive of all elements.

Hope that helps.

Alkali metals (situated far away from transitional metals and noble gases) are the most reactive elemental group. Cesium is second from the bottom of this group, with 6 electron shells, so it fits all the characteristics of a reactive atom, therefore making it the most reactive element.

Which of the following giant covalent structures is a good conductor of electricity?
a) polythene
b) diamond
c) graphite
d) silicon dioixide

Answers

I would go with C

Hope this helps

Given the equation
N2(g) +3H2 (g)--> 2NH3 (g)
1 mole of N2 gas is needed to completely react with 3 moles of H2 gas.
How many molecules of H2 gas are needed?

Answers

Answer:

numbers of molecules = 3×6.023×10-23

PLEASE HELP ASAP I'M SO STRESSED

Answers

Answer:

160.3g

Explanation:

We know the equation:

No of moles = mass ÷ Mass of element

We need to find the mass, so make mass the subject of the formula.

Mass = No. of moles × mass of element

Mass = 5 × 32.06

Mass = 160.3g

If the temperature changes by 100 K, by how much does it change in degrees Celsius?
A. 0 degrees Celsius
B. 100 degrees Celsius
C. 37 degrees Celsius
D. 273 degrees Celsius

Answers

Taking into account the degrees Celsius and Kelvin, if the temperature changes by 100 K, by 100 degrees Celsius it change in degrees Celsius.

A degree Centigrade is a unit of temperature (the physical quantity that reveals the level of heat) whose symbol is °C.

On the other hand, the degree Kelvin, whose symbol is K, is the unit of temperature on the scale created by William Thomson Kelvin, in 1848, based on the degree Celsius, he established his zero point (0) at zero absolute (-273.15 ° C). The figure 0 K is equivalent to the theoretical point where gases have no volume. Absolute zero or 0 K is the point where molecules theoretically stop moving. It is the "perfect" cold.

Considering that zero on the Celsius or degrees centigrade (0 ° C) scale is defined as the equivalent of 273.15 K, the conversion from degrees ° C to K is carried out using the following expression:

T(K)= T(°C) + 273.15 K

In this case, if the temperature changes by 100 K, as it is a change in temperature, the numerical value in K units is the same in ° C units.

Then, the correct answer is option B. if the temperature changes by 100 K, by 100 degrees Celsius it change in degrees Celsius.

Learn more about degrees Celsius and Kelvin:

https://brainly.com/question/2800860?referrer=searchResults

In one to two sentences, explain how to compare the strength of electrostatic forces between molecules in salt water to the strength of electrostatic forces between molecules in freshwater. Include a description of the data to be collected and how that data would allow one to draw conclusions about the relative strengths of the electrostatic forces in the two substances.

Answers

The boiling point of salt water is greater than that of fresh water hence the electrostatic forces between molecules in salt water is greater than that between the molecules in salt water.

Fresh water contains does not contain dissolved solutes like salt water. Salt water contains a lot of dissolved mineral salts making the salt water to be rich in ions.

Generally, the boiling points of substances can serve as a measure of the strength of electrostatic forces between molecules in either kind of water. We will easily find the that the boiling point of salt water is far higher than that of fresh water indicating greater electrostatic forces between molecules in salt water than between molecules in fresh water.

Learn more about boiling point: https://brainly.com/question/2153588

Read this sentence from Chapter One of Jack London’s The Call of the Wild.

Buck rushed at the splintering wood, sinking his teeth into it, surging and wrestling with it. Wherever the hatchet fell on the outside, he was there on the inside, snarling and growling, as furiously anxious to get out as the man in the red sweater was calmly intent on getting him out.

What is a good prediction question to ask after reading this excerpt?

Answers

Answer:

b)

Explanation:

It shows the natrual proggresion of a story and helps blend the narrtive together.

Answer:B

Explanation: i took the quiz on edge

Which of the following is true of grinding during
digestion?
A. The process of grinding is a physical change
that takes place in the mouth during digestion.
B. The process of grinding is a chemical change
that takes place in the mouth during digestion.
C. The process of grinding is a physical change
that takes place in the small intestine during
digestion
D. The process of grinding is a chemical change
that takes place in the small intestine during
digestion

Answers

The process of grinding is a physical change that takes place in the mouth during digestion.

GRINDING:

Grinding is one of the processes that occur during the digestion of food molecules into simpler substances.

Grinding of food molecules occurs in the mouth with the aid of the teeth, which is used to chew.

However, the process of grinding is a physical change because it does not result into the formation of new substances or change the chemical constituents of the food.

Learn more about physical change at: https://brainly.com/question/1984022?referrer=searchResults

Write method of manufacturing of oxygen gas from liquid air

Answers

Answer:

cryogenic distillation process

Explanation:

Cryogenic distinction between carbohydrates and harmon process.

A solution containing 0.60 moles of sodium hydroxide is added to excess magnesium sulfate in solution. A white solid, magnesium hydroxide, is formed.

a) Write a balanced equation including the states of reactants and products.
b) write the name of the other product formed? ​

Answers

Explanation:

and then name of the other product will be sodium sulphate

5. How many grams of calcium carbonate (CaCO3) are needed to maker 1 liter of 2-molar solution?
029
O 100.19
O 50.19
O 200.2g

Answers

Answer: Molar masses 40.8 and 100.1

Explanation:


12. Draw the dot diagram for a molecule of P2
[show your work and draw a box around your answer]

Answers

Explanation:

download the app topper

[tex]\rule{2000pt}{1000000pt}[/tex]

mamama

Silicone is a type of synthetic compound made of silicon, oxygen, and other elements. There are many different kinds of silicone. One kind is a liquid and is commonly used as a lubricant to reduce friction between moving parts. Unlike petroleum-based lubricants, silicone is nontoxic. However, silicone is more expensive than petroleum-based lubricants.

Which of the following would silicone lubricants most likely be used for?

Answers

Explanation:

Liquid-based lubricant

Answer:

study island : food service equipment

Explanation:

look at the picture ​

Answers

Answer:

The strong electric force.

Explanation:

Trust me. If its wrong, comment on this, don't delete it. If someone else answers with the wrong question than other students might get the answer wrong. So if its right, say that it is, if its wrong, tell others what the real answer is.

Which term describes the small, somewhat circular pattern of wind?

A Easterlies

B Trade Winds

C polar winds

D convection cells

Answers

Answer:

its D, convection cells

2. What do acidic solutions have high concentrations of? ​

Answers

hydrogen ions
mark me brainlist

Answer:

Explanation:

An acidic solution has a high concentration of hydrogen ions (H +start superscript, plus, end superscript), greater than that of pure wate

What are some examples of a physical change? (list more than 2 examples)

Answers

Breaking glass
Cutting hair
Folding paper
Chopping wood
Melting ice

PLEASEEE HELPPPPPPPPPPPPPPPPPP

Answers

It’s 160.325 grams of mol sulfur! Hope this helped :)

Two atoms of element Q mixed with element E​

Answers

Both the elements combine together due to incomplete outermost shell.

Two atoms of element Q mixed with element E​ in order to achieve stability because both the elements have incomplete outermost shell which make them very reactive. In element E we can see that it has 7 electrons while on the other hand, element Q has 5 number of electrons.

For gaining stability, each element has to reach 8 electrons so that's why both the elements react with each other and get stability so we can conclude that both the elements combine together due to incomplete outermost shell.

Learn more about reaction here: https://brainly.com/question/11231920

Learn more: https://brainly.com/question/26045025

What is a Chemical Properties and Physical Properties? Please tell me the deffinition of them both.

Answers

Answer:

All properties of matter are either physical or chemical properties and physical properties are either intensive or extensive. ... Physical properties can be measured without changing a substance's chemical identity. Chemical properties can be measured only by changing a substance's chemical identity.

Explanation:

Most weak bases are:
a. Anions of weak acids
b. Anions of strong acids
C.Cations of weak acids
d. Both A and C

Answers

Answer:

The conjugate base of a very weak acid is stronger than the conjugate base of a strong acid.  

Explanation:

The stronger the acid, the weaker its conjugate base and vice versa  A very weak acid has a very strong conjugate base.

how many grams are in 4.5 x 10^22 molecules of water

Answers

Answer:

1.35 g

Explanation:

water is h2o, so the molar mass is 1.01x2+16.00=18.02. divide 4.5 x 10^22 by 6.022 x 10^23 to get 7.5 x 10^-2 (2 sig figs). 18.02 x 7.5 x 10^-2 is 1.35 g

Mendeleev's arrangement of the periodic table was in order of increasing ____.
A. atomic number
B. atomic mass
C. neutron number
D. valence electron number

Answers

Answer:

B. atomic mass

Explanation:

He arranged the elements into rows in order of increasing mass so that elements with similar properties were in the same column.

Oxygen is produced by the reaction of sodium peroxide, Na2O2 , and water.
2 Na2O2 (s) + 2 H2O(l) ---> O2(g) + 4 NaOH(aq)
Calculate the mass of Na2O2 in grams needed to form 5.20 g of oxygen.

Answers

Answer: 23.53g

Explanation:

5.2/(2x16) = 0.1625 mol

0.1625 x 2 = 0.325 mol

0.325 x (23 x 2 + 16 x 2) = 78 x 0.325 = 23.53g

Other Questions
What real world scenarios best exemplifies the concept of hierarchical diffusion? does the following atomic model of a chemical reaction correctly demonstrate the law of conversation of matter why or why notplzzz help i need help with understanding what this is Karen invited 150 friends to her 15th birthday party, but not everyone can attend, Karens mother want one adult for every 25 of her friends. The cost of food is $20 for every four of her friends, and the adults eat for free. If a total of 116 people (including Karen and her mother) go to the party, how many are adults and how many are Karens friends? How much will the food cost? someone please help i do not understand i will give you brainlyest What is the solution to the system? (3, 2) (4, 3) (4, 2) (4, 1). What is the perimeter of the inside of the track? Explain in detail the geographical and financial importance of Mewar, Which material was used to make ancestral pueblo adobe homes in cliff walls? the maximum fine for driving and drinking an alcoholic beverage is 3/2x-5=-4/7x+1/5 please How is 6% expressed as a fraction in lowest terms according to this map the tang dynasty was mostly located inanswer: eastern china Explain how the graphic organizer helped you formulate your decision and participate in the discussion. What is the smallest integer $k>2000$ such that both $\dfrac{17k}{66}$ and $\dfrac{13k}{105}$ are terminating decimals?. Solve the Inequality for x.-5x + 20 < 5A) x > 5B) x < 3C) x > 3D) x < -5Thanks!!! :D Ram jumps onto a cement floor from a height of 1m and comes to rest in 0.1sec.Then he jumps onto a sand floor from a height of 9m and comes to rest in 1sec.Find the ratio of forces of cement floor and sand floor. a*3a^(2) help quickly which major muscle group does the bench press and push-ups strengthen Identify the common difference of the sequence: 8, 1, 6, 13,