With the temperature held constant at 300 K, use the Select mass slider to place weights on the lid. Record the pressure and volume of the gas for each added mass.
Added mass on the lid Total mass Pressure Volume
(Lid + added mass)
0 kg 10 kg
10 kg 20 kg
20 kg 30 kg
30 kg 40 kg

Answer:

False

Explanation:

Roman numerals are seen in the names of several compounds. They often appear immediately after the name of central atom in the molecule.

These Roman numerals are used to depict the oxidation state of the central atom in the molecule and not to show how many of that ion appear in the formula.

For instance, in carbon IV oxide, the Roman numeral IV shows that the central atom in the compound-carbon is in the +4 oxidation state.

Answer:

If the colour of the indicator changes blue when a base is there and when it changes to red or pink or scarlet when it is acid. Then we can say that the indicator is working

Answer:

option b is your right answer

Answer:

Laws governing gas behavior.

Explanation:

Boyle's law:

It relates the pressure and volume of an ideal gas at a constant temperature.

According to this law:

"The volume of a fixed amount of gas at constant temperature is inversely proportional to its pressure".

[tex]P \alpha V[/tex].

Charle's law:

It relates the volume and absolute temperature of an ideal gas at a constant pressure.

According to this law:

"The volume of a fixed amount of gas at constant pressure is directly proportional to its absolute temperature".

[tex]V \alpha T[/tex].

Avogadro's law:

According to this law:

equal volumes of all gases under the same conditions of temperature and pressure contain, an equal number of moles.

[tex]V \alpha n[/tex].

Ideal gas equation:

By combining all the above-stated gas laws, this equation is formed as shown below:

[tex]V \alpha \frac{nT}{P} \\=> V= R. nT/ P\\=>PV=nRT[/tex]

R is called universal gas constant.

It has a value of 0.0821L.atm.mol-1.K-1.

Answer:

Boyle's law, Charle's law,  Guy Lussac's law and Avogadro's law

Explanation:

All the gases behaves similarly when the environment conditions are normal. But when the physical condition changes like when the pressure, volume or temperature changes, the gas behaves differently and shows a deviation.

The number of gas laws are :

Boyle's Law

Boyle's law states that when the temperature remaining constant, the pressure of the gas varies inversely to the volume of the gas.

i.e.   [tex]P \propto \frac{1}{V}[/tex]

Charle' law

Charle's law states that when pressure is constant, the temperature of a gas is directly proportional to the volume.

i.e. , [tex]$T \propto V$[/tex]

Gay Lussac's law

Gay - Lussa law states the volume and the mass of the pressure of the gas is directly proportional to the  temperature of the gas.

i.e. P.T = constant

Avogadro's law

It states that under the conditions of same pressure as well as temperatures, the gases having equal volumes will have same numbers of molecules.

i.e. [tex]\frac{V_1}{n_1}=\frac{V_2}{n_2}[/tex] = constant

Answer:

How many grams C2H6 in 1 mol? The answer is 30.06904. We assume you are converting between grams C2H6 and mole. You can view more details on each measurement unit

Answer:

This answer is "True"

Answer:

Enzyme ? ...............

Answer:

Democritus first introduced the idea of the atom almost 2500 years ago.

Answer:

B. Democritus

Explanation:

Answer:

The most intense line in the emission spectrum for sodium appears at a wavelength of 589 nm.

What color would you expect to observe when a solution that contains sodium ions is heated strongly in the flame of a Bunsen burner?

Explanation:

Put a clean wire loop in a solid sample of the compound containing sodium ions, then keep it on the blue flame of the Bunsen burner.

The color of sodium ions in the Bunsen burner shows charactrestic yellow color.

Answer:

Those two horizontal lines.

Explanation:

Hello there!

In this case, when focusing on these heating curves, it is important to say they tend to have two constant-temperature sections and three variable-temperature sections. Thus, from lower to higher temperature, the first constant-temperature section corresponds to melting and the second one vaporization, whereas the three variable-temperature sections correspond to the heating of the solid until melting, the liquid until vaporization and the gas until the critical point.

In such a way, we infer that the boxes referred to constant temperature are referred to a gain in potential energy, that is, the two horizontal lines.

Regards!

Answer: My sacrifica has been made.

Explanation:

Answer:

2.85 mol

Explanation:

Step 1: Given data

Mass of sulfur tetrafluoride (SF₄): 309 g

Step 2: Calculate the number of moles corresponding to 309 g of sulfur tetrafluoride

To convert mass to moles we need a conversion factor: the molar mass. The molar mass of SF₄ is 108.07 g/mol.

309 g × 1 mol/108.07 g = 2.85 mol

Answer:

32.1 g

Explanation:

3CaCl₂ + 2AlF₃ → 3CaF₂ + 2AlCl₃

First we convert 36.5 g of AlF₃ into moles, using its molar mass:

36.5 g ÷ 133.34 g/mol = 0.274 mol AlF₃

Then we convert 0.274 moles of AlF₃ into moles of CaF₂, using the stoichiometric coefficients of the reaction:

0.274 mol AlF₃ * [tex]\frac{3molCaF_2}{2molAlF_3}[/tex] = 0.411 mol CaF₂

Finally we convert 0.411 moles of CaF₂ into grams, using its molar mass:

0.411 mol * 78.07 g/mol = 32.1 g

Answer:

[Ar] 4s²3d³

Explanation:

Vanadium has atomic number of 23. The electronic configuration of vanadium can be written as:

V (23) => 1s² 2s²2p⁶ 3s²3p⁶ 4s²3d³

NOTE: After the 18th electron, 4s will be filled before 3d.

We can also write the electronic configuration of an element in its condensed form by writing the symbol of the noble before the desired element in a squared bracket followed by the remaining electrons to complete the electronic configuration of the element.

The electronic configuration of vanadium in its condensed form is given below:

The noble gas before vanadium is Argon (Ar) with atomic number of 18. Thus, the electronic configuration of vanadium becomes:

V (23) => [Ar] 4s²3d³

Answer:

Ions.

Explanation:

Ions are the free moving, charged particles in a molten mixture of aluminum oxide and cryolite because the liquid state loosely held the molecules and the the molecules can easily move from one place to another. These ions helps in the conduction of electricity in the solution due to its free movement so we can say that ions are the charge particles that moves freely in the mixture of aluminum oxide and cryolite.

The free moving, charged particles in a molten mixture of aluminium oxide

and cryolite are known as Ions.

Ions are referred to an atom or compound which possesses an electrical

charge.The charge could be positive or negative and the positive ions are

called cations while the negative ions are referred to an anions.

Ions are usually free moving, take part in chemical reactions and help to

conduct electricity as a result of them being transferred from one point to

another.

Read more on https://brainly.com/question/7222067

No, you absolutely need a balanced equation because you need the coefficients to figure out the molar ratios plus you need the amount of one reactant or product to determine the theoretical yield.

No, it's not possible to calculate the theoretical yield  without a balanced equation.

Theoretical yield is the yield that is calculated by the complete reaction of the limiting reagent. This is called expected or calculated amount of product.

[tex]\rm percent\; yield = \dfrac{(actual\; yield)}{(theoretical\; yield)} \times 100\\\\[/tex]

Thus, No, it's not possible to calculate the theoretical yield  without a balanced equation.

Learn more about theoretical yield

https://brainly.com/question/14966377

#SPJ2

Answer:

pOH = - log[OH-]

[OH-] = 0.6M

[tex]pOH \: = - log(0.6) \\ = 0.2218487496 \\ pH \: + pOH \: = 14 \\ pH \: + 0.221848749 = 14 \\ pH = 14 - 0.221848749 \\ = 13.77815125 \\ 13.8[/tex]

Answer:

the number of gas molecules in the sample

Answer:

[tex]CH _{3}CH _{3}[/tex]

Ethane

Answer: See explanation

Explanation:

Vacuum filtration is referred to as a fast filtration technique that is used in the separation of solids from liquids. It is also used to collect a desired solid. It basically uses a side-arm flask and a Buchner funnel.

Based on the question, the techniques that should be used to ensure a quantitative separation goes thus:

• Wet the filter paper before the mixture is poured into the filter funnel.

• Then, carefully rinse the flask with a little amount of water into the filter funnel.

• After that, the solid on the filter paper should be washed the with a small amount of water.

• Finally, Dry the solid on the filter paper when the separation is done.

Answer:

[tex]M'=41.3g/mol[/tex]

Explanation:

From the question we are told that:

Time Through first barrier [tex]T_1=3.79min[/tex]

Time Through second barrier [tex]T_2=2.66min[/tex]

Generally the Grahams Law equation for   time of diffusion is mathematically given by

 [tex]T=K\sqrt{M}[/tex]

Where

M=Mass Number of Kr

 [tex]M=83.8[/tex]

Therefore

 [tex]{T}{\sqrt{M}={T}{\sqrt{M'}[/tex]

 [tex]{3.79}{\sqrt{83.8}={2.66}{\sqrt{M'}[/tex]

 [tex]M'=0.645[/tex]

 [tex]M'=41.3g/mol[/tex]

Answer:

3×10⁵ N/m²

Explanation:

From the question given above, the following data were obtained:

Force (F) = 450 N

Area (A) = 0.0015 m²

Pressure (P) =?

Pressure is simply defined as the force per unit area. Mathematically, it is expressed as:

Pressure (P) = Force (F) / Area (A)

P = F/A

With the above formula, we can obtain the pressure exerted by the man on the ground. This can be obtained as follow:

Force (F) = 450 N

Area (A) = 0.0015 m²

Pressure (P) =?

P = F/A

P = 450 /0.0015

P = 3×10⁵ N/m²

Thus, the pressure exerted by the man on the ground is 3×10⁵ N/m².

Answer:

(d) the ion with 24 electrons, 30 neutrons, and a 3+ charge ... (b) the ion with 36 electrons, 35 protons, and 45 neutrons.

The question is incomplete, the complete question is;

Which aqueous solution has the highest vapor pressure at 25ºC?

15.0g of glucose (C6H12O6) in 100.0mL of water

25.0g of glucose (C6H12O6) in 100.0mL of water

15.0g of sucrose (C12H22O11) in 100.0mL of water

25.0g of sucrose (C12H22O11) in 100.0mL of water

Answer:

15.0g of sucrose (C12H22O11) in 100.0mL of water

Explanation:

The vapor pressure of a substance is a colligative property. Colligative properties are the properties of a substance that depend on the amount of solute present.

Since vapour pressure is a colligative property, we have to look out for the solution that has the lowest number of moles because as more solute is dissolved in the solvent, the vapor pressure of the solvent decreases.

Hence, 15.0g of sucrose (C12H22O11) in 100.0mL of water has the lowest number of moles in solution thus it is expected to exhibit the highest vapour pressure.

Answer:

H2O> C6H5SO3- > CH3O- > H2N-

Explanation:

SN2 reaction is a reaction in which there is a synchronous departure of the leaving group and attachment of the incoming nucleophile in the transition state. Hence, an SN2 reaction passes through a single transition state. It is a bimolecular reaction.

A good leaving groups must be stable on its own. Usually, weak bases and neutral species are good leaving groups.

The order decreasing leaving group capabilities in SN2 reactions for the species listed in the question is;

H2O>C6H5SO3-> CH3O-> H2N-

Hence H2O is the best leaving group while H2N- is the worst leaving group.

The ranking from the best-leaving group to worst leaving group in SN2 reactions would be D. H₂O (water), C. C6H5SO3- (phenylsulfonate), B. CH₃O- (methoxide), A. H₂N- (amide).

In SN₂ reactions, leaving group capabilities are determined by the ability of the group to accept electrons and leave the molecule. The better the leaving group, the easier it is for it to leave the molecule. Based on this,

Water is a weak base and a good leaving group in SN2 reactions.

Phenylsulfonate is also a good leaving group, but it is slightly weaker than water.

Methoxide is a weaker base and leaving group compared to water and phenylsulfonate.

Amide is the weakest base and leaving group among the provided species.

To learn more about the SN₂ reactions, follow the link:

https://brainly.com/question/32099348

#SPJ6

Answer:

true

Explanation:

I think

Answer:

drought

Explanation:

droughts are long periods without water

quimica espero que si sea corecta

Answer:

m = 20.9 g.

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to solve this problem by recalling both the Avogadro's number for the calculation of the moles in the given molecules of calcium phosphate and the molar mass of this compound in order to secondly calculate the mass as shown on the following setup:

[tex]m=4.05x10^{22}molecules*\frac{1mol}{6.022x10^{23}}*\frac{310.18g}{1mol}\\\\m=20.9g[/tex]

Regards!

Answer:

B

Explanation:

AH is positive so the forward reaction is endothermic. Thus, increasing temperature would cause equilibrium to shift to the right as endothermic reaction favors higher temperature. This increases the yield of NO.

Answer:

B. 4 ham slices

Explanation:

A chemical reaction involves one or more substances known as reactants combining chemically to give one or more substances known as products.

Reactants in chemical reactions combine in definite mole or mass ratios to give products. Therefore, when one substance is present in excess of what is required to combine with another to form products, that substance is known as the excess reagent. The other substance which is present in a smaller amount and which when used up, the reaction stops is known as the limiting reagent.

From the illustration of the sandwiches in the question, the recipe for one sandwich represents the chemical equation of a reaction. The equation form is given below:

2 cheese slices + 1 ham slice + 2 bread slices ---> 1 sandwich

The ratio of the reactant is 2 : 1 : 2

From the available ingredients, 12 cheese slices, 10 ham slices, 12 bread slices.

12 cheese slices will require 6 ham slices and 12 bread slices to produce 6 sandwiches.

However, since there are 10 ham slices, 4 ham slices will be left over unused. This is the excess or leftover reactant.

Answer:

B. 4 ham slices

Explanation:

Got it right on the test