WILL GIVE BRAINLIEST AND A THANKS TO FIRST CORRECT ANSWER!!!!
Which statements describe processes involved in the accretion of planetesimals and protoplanets? Check all that apply.
Both involve the melting of solid materials in the nebula.
Both involve the formation of solid particles from nebular materials.
Both involve the work of the gravitational push on nebular materials.
Both involve the trapping of gases and the clumping of masses of matter.
Both involve the growing of gas grains with the addition of atoms and molecules.

Answer:

The distance reached is 14.3 m.

Explanation:

To find the distance reached by the diamond first we need to find the flight time:

[tex] t_{v} = \sqrt{\frac{2h}{g}} [/tex]

Where:

h: is the height = 10m

g: si the gravity = 9.81 m/s²

[tex] t_{v} = \sqrt{\frac{2h}{g}} = \sqrt{\frac{2*10 m}{9.81 m/s^{2}}} = 1.43 s [/tex]

Now, we can find the distance reached:

[tex] x = V_{0_{x}}*t_{v} [/tex]

Where:

[tex]V_{0_{x}}[/tex] is the initial horizontal velocity = 10 m/s

[tex] x = V_{0_{x}}*t_{v} = 10 m/s*1.43 s = 14.3 m [/tex]

Therefore, the distance reached is 14.3 m.

I hope it helps you!    

Answer:

The answer is A.

Explanation:

Electrons are found outside of a nucleus.

Average speed = (total distance) / (time to cover the distance)

Speed = (6.6 meters) / (2 seconds)

Speed = 3.3 m/s

Answer:

Fats can be identified with a paper without any chemical. Just the food sample in Fats should be placed on the first paper than the rest three papers should be placed on and if any marks are there that shows the quantity of presence in Fats.

Explanation:

Plz Mark me as brainliest

The diameter of the reflecting surface of spherical mirror is called its aperture. Mirrors whose aperture is much smaller than its radius of curvature, we use R=2f.

Answer:

A) The distance between the stations is 1430m

B) The time it takes the train to go between the stations is 80s

Explanation:

First we will calculate the distance covered for the first 20s.

From one the equations of kinematics for linear motion

[tex]S = ut + \frac{1}{2}at^{2} \\[/tex]

Where [tex]S[/tex] is distance traveled

[tex]u[/tex] is the initial velocity

[tex]t[/tex] is time

and [tex]a[/tex] is acceleration

Since the train starts from rest, [tex]u[/tex] = 0 m/s

Hence,  for the first 20s

[tex]a =[/tex] 1.1 m/s²; [tex]t =[/tex] 20s,  [tex]u[/tex] = 0 m/s

∴ [tex]S = ut + \frac{1}{2}at^{2} \\[/tex] gives

[tex]S = (0)(20) + \frac{1}{2}(1.1)(20)^{2}[/tex]

[tex]S = \frac{1}{2}(1.1)(20)^{2}[/tex]

[tex]S =[/tex] 220m

This is the distance covered in the first 20s.

Now, we will calculate the speed attained here

From

[tex]v = u +at[/tex]

Where [tex]v[/tex] is the final velocity

Hence,

[tex]v = 0 + 1.1(20)[/tex]

[tex]v = 1.1(20)[/tex]

[tex]v =[/tex] 22 m/s

This is the constant speed attained when it proceeds for 1100m

We can calculate the distance covered while slowing down from

[tex]v^{2} = u^{2} + 2as[/tex]

The initial velocity, [tex]u[/tex] here will be the final velocity before it started slowing down

∴[tex]u[/tex] = 22 m/s

The final velocity will be 0, since it came to a stop.

∴ [tex]v[/tex] = 0 m/s

[tex]a = -[/tex]2.2 m/s² ( - indicates deceleration)

Hence,

[tex]v^{2} = u^{2} + 2as[/tex] gives

[tex]0^{2} =22^{2} +2(-2.2)s[/tex]

[tex]0=22^{2} - (4.4)s\\4.4s = 484\\s = \frac{484}{4.4} \\s = 110m[/tex]

This is the distance traveled while slowing down.

A) The distance between the stations is

220m + 1100m + 110m

= 1430m

Hence, the distance between the stations is 1430m

B) The time it takes the train to go between the stations

The time spent while accelerating at 1.1 m/s² is 20s

We will calculate the time spent when it proceeds at a constant speed of 22 m/s for 1100m,

From,

[tex]Speed =\frac{Distance}{Time}\\[/tex]

Then,

[tex]Time = \frac{Distance}{Speed}[/tex]

[tex]Time = \frac{1100}{22}[/tex]

Time = 50 s

And then, the time spent while decelerating (that is, while slowing down)

From,

[tex]v = u + at\\0 = 22 +(-2.2)t\\2.2t = 22\\t = \frac{22}{2.2} \\t= 10 s[/tex]

This is the time spent while slowing down until it stops at the station.

Hence, The time it takes the train to go between the stations is

20s + 50s + 10s = 80s

The time it takes the train to go between the stations is 80s

Answer:

Kinetic energy is the energy possessed in a body in motion

Answer:

wind energy is also called kinetic energy

Answer:

Explanation:

*Hope this helps*

Answer: Friction is a force that resists the relative motion between two objects or materials. The causes of this resistive force are molecular adhesion, surface roughness, and deformations. Adhesion is the molecular force resulting when two materials are brought into close contact with each other

Answer:

A wave in which the medium vibrates at right angles to the direction of the propagation is called transverse wave.

Answer:

nngh have

bjruh hjrhhj be rnrnnrnrnnnrnjrjnnnnnnnnrnrn n n and I was nrn

Explanation:

jbbbbbhhhjjnnnnnnnnnnjhvcc

Explanation:

[tex]\rm{\gray{\underline{\underline{\blue{GIVEN:-}}}}}[/tex]

[tex]\rm{\gray{\underline{\underline{\blue{TO\:FIND:-}}}}}[/tex]

[tex]\rm{\gray{\underline{\underline{\blue{SOLUTION:-}}}}}[/tex]

We have know that,

[tex]\green\bigstar\:\rm{\gray{\overbrace{\underbrace{\red{S\:=\:ut\:+\:\dfrac{1}{2}\:at^2\:}}}}}[/tex]

Where,

[Note :- Here, acceleration is ‛acceleration due to gravity’ .]

=> S = 1/2 × 10 × (3)^2

=> S = 5 × 9

=> S = 45m -----(1)

✒ If the ball takes ‛n’ second to fall the ground, then distance covered in nth second is,

[tex]\green\bigstar\:\rm{\gray{\overbrace{\underbrace{\red{S_n\:=\:u\:+\:\dfrac{g}{2}\:(2n\:-\:1)\:}}}}}[/tex]

=> Sn = 0 + 10/2 (2 × n - 1)

=> Sn = 5 (2n - 1)

=> Sn = 10n - 5 -----(2)

Therefore,

=> 10n = 45 + 5

=> n = 50/10

=> n = 5

Now put the value of ‛n = 5’ in equation(2), we get

=> Sn = 10 × 5 - 5

=> Sn = 50 - 5

=> Sn = 45m

[tex]\rm{\pink{\therefore}}[/tex] The height of the journey is “ 45m ” .

Answer:

The horizontal component of the force, Fₓ = 63.64 N

The vertical component of the force, [tex]F_y[/tex] =  63.64 N

Explanation:

Given;

magnitude of the force, F = 90 N

angle between the handle and the ground, θ = 45°

The horizontal component of the force, Fₓ = Fcosθ

Fₓ = 90 x cos45

Fₓ = 63.64 N

The vertical component of the force, [tex]F_y = Fsin \theta[/tex]

[tex]F_y[/tex] = 90 sin45

[tex]F_y[/tex] = 63.64 N

Therefore, the horizontal  and vertical components of the force is 63.64 N.

Answer:

2.05pm.

Explanation:

In the picture.

ANYTHING that's dropped near the Earth's surface and isn't affected by air resistance falls 9.8 m/s faster at any time than it did 1 second earlier.

0.5 second after it was dropped with zero speed, it's falling at

(0.5) x (9.8 m/s)  =  4.9 m/s .

It makes no difference which building it was dropped from.

Answer:

1.53 m/s²

Explanation:

Given:

Δx = 400 m

v₀ = 0 m/s

v = 35 m/s

Find: a

v² = v₀² + 2aΔx

(35 m/s)² = (0 m/s)² + 2a (400 m)

a = 1.53 m/s²

Answer:

In a closed-loop system, matter is used to generate energy, and the energy generated is used to produce matter, and the cycle goes on without end.

Explanation:

A closed-loop system is one in which materials or energy is recycled without end through a production cycle. This means that a raw material is used to produce a finished product, and the finished product at the end of its use cycle is converted back and used as a raw material to produce more of it again. Energy and matter can also be cycled in the same way in an energy and matter closed-loop system, converting matter to energy, and the energy is put back into the production of more of the matter.

In a closed system loop, the matter has been recycled to provide raw material and form new products. The energy formed by the product has been recycled by being used by the raw materials for the formation of new products.

The closed system loop can be defined as the system in which the products and energy has been recycled continuously to form more products. The energy has been formed in the closed system loop, that can be utilized by the raw materials for the production of energy.

The products formed after reaching the equilibrium of the formation, and dissociation reaches the point, and starts to dissociate to provide the raw material to the system.

Thus, in a closed system loop, the matter has been recycled to provide raw material and form new products. The energy formed by the product has been recycled by being used by the raw materials for the formation of new products.

For more information about a closed system loop, refer to the link:

https://brainly.com/question/11995211

well thanks for the Information

Explanation:

Torque = Force * Perpendicular distance of the force = 10N * 0.8m = 8Nm.

In diagram A, both torques are acting in a clockwise direction. Hence the net torque is 2N * 1m + 4N * 1m = 6Nm, clockwise.

In diagram B, the torques are acting in opposite directions. For the clockwise one, its torque is 5N * 4m = 20Nm. For the anticlockwise one, its torque is 2N * 10m = 20Nm. Since they are in opposite directions and are equal, they cancel out each other.

Hence net force = 0N and net torque = 0Nm.

Answer:

Because concave mirror focus the sunlight at one particular point . At that particular point , amount of sunlight is converged and heat is trapped at that point . This is because , it burn the paper on which the image is focussed .

Answer:

Gravitational potential energy

Explanation:

Gravity would act upon it if it were not suspended.

Answer: Gravitational potential energy

Explanation: I did the quiz! Hope it helped!

Answer:

350 miles

Explanation:

because multiply 70 times 5 and you will get 350

Answer:

C

To convert sunlight into usable sugars

(

Explanation:

Answer:

So B

Explanation:

The statement that the energy involved in diffusion is as follows:

Thus, the correct option is C.

Diffusion may be defined as the process of migration of substances or molecules through a semipermeable membrane from an area of higher concentration to an area of lower concentration.

Diffusion does not require energy because it is classified under the passive transport of materials. Diffusion always works towards the concentration gradient.

Energy is typically involved when the movement occurs against the concentration gradient like active transport.

Therefore, the correct option for this question is C.

To learn more about Diffusion, refer to the link;

https://brainly.com/question/94094

#SPJ6

Answer:

weight is the mass of an object

it is depends on mass of the body.

Answer:

the force with which an object near the earth on another celestial body is atteracted toward the center of the body by gravity. an objects weight depends on its mass

Answer:

less than 10 inches, or 25 centimeters, of precipitation a year.

Explanation:

PS. the precipitation recieved in the desert can be in the form of either rain or snow.

Answer:

I am pretty sure its C

Explanation:

Answer:

4.55 seconds

Explanation:

Speed=distance / Time

So Time = Distance /speed

=1550/340