Will Argon, Neon, and Krypton react the same or differently? Explain.

The difference as required in the question to the correct number of significant figures is 147 in units of millimeter.

Let us take note of the fact that the term significant figures has to do with the number of figures that could be assigned a place value. This is the number of figures that we could be able to give the corresponding value.

Now we can see that one of the numbers have four significant figures and the other number has only about three significant figures. The result that we obtain must be such that has three significant figures.

It the follows that the result of the computation is; 147.6 - 0.82 = 147 in units of millimeter.

Learn more about significant figures:https://brainly.com/question/17396594

#SPJ1

Answer: Potential energy.

Explanation: Potential energy is stored energy and the energy of position.

The relative atomic mass of the rubidium atom could be calculated from the data provided as 85.46.

When we talk about an isotope, we are referring to the idea that we could have tow or more atoms of the same element that have the same atomic number but do not have the same mass number. Given that the atomic number is the number of protons, it then follows that the two elements as we know them does differ only in the number of the neutrons that they have. The atoms that we have thus described in the several lines above are other wise called the isotopes of the element. We have in the image of the question a clear example of what an isotope is and we now want to find the relative atomic mass of Rubidium.

The relative atomic mass can be obtained from the use of the formula;

(84.9118 * 72.2/100) + (86.9092 * 27.8/100)

= (61.30 + 24.16)

= 85.46

Learn more about isotopes:https://brainly.com/question/11680817

#SPJ1

The energy required to ionize a hydrogen atom from the n = 3 energy level is  2.422 x 10 ⁻¹⁹J.

in the given question ,

The ionization energy can be expressed as follows:

E = 2.18 x 10 ⁻¹⁸ (1/n₁² - 1/∞²)

given , n = 3

E = 2.18 x 10 ⁻¹⁸ (1/3² - 1/∞²)

E = (2.18 x 10 ⁻¹⁸) / 9

E = 2.422 x 10 ⁻¹⁹

To learn more about ionization energy refer to :

https://brainly.com/question/20658080

#SPJ13

Considering the definition of atomic mass, isotopes and atomic mass of an element, the relative atomic mass for pivotium is 418.32 amu.

The isotopes of an element are those different atoms that make up an element, that is, their atomic numbers are the same, but the number of neutrons is different.

The atomic mass of an element is the weighted average mass of its natural isotopes, taking into account the relative abundance of each of them.

In this case, you know:

The average mass of pivotium can be calculated as:

average mass of pivotium= 423 amu×0.22 + 417 amu×0.78

average mass of pivotium= 418.32 amu

Finally, the atomic mass of the pivotium is 418.32 amu.

Learn more about average atomic mass:

brainly.com/question/13362555

brainly.com/question/1826476

brainly.com/question/15230683

brainly.com/question/7955048

#SPJ1

Answer: O2 is the reducing agent

Explanation: When you are adding oxygen, you are oxidizing.  So O2 is the reducing agent because Aluminum  loses electrons and becomes positive in charge and O2 gains electrons and becomes negative in charge.  Aluminum is oxidized and oxygen is reduced, therefore the oxygen is the reducing agent.  Remember oxidation cannot occur in isolation.  There is another process going on when something is oxidized and that process is reduction.    

The balanced equation of the reaction is:

Balanced equations are equations in which the moles of atoms on the right-hand side of the equation are equal to the moles of atoms on the left-hand side of the equation.

Balanced equations ensure that the law of the conservation of mass is obeyed such that the mass of reactants is equal to the mass of the products.

In balancing a chemical equation, the following steps are followed:

Considering the given reaction:

In the reaction, methane gas reacts with chlorine gas to produce tetrachloromethane and hydrogen chloride gas.

The balanced equation of the reaction is given below as follows:

CH₄ (g) + 4 Cl₂ (g) ---> CCl₄ (l) + 4 HCl (g)

The reaction is a substitution reaction in which chlorine atoms substitute hydrogen atoms in the methane gas molecule.

Learn more about balanced equations at: https://brainly.com/question/11904811

#SPJ!

Liters of iodine pentafluoride can be formed at STP from the reaction of 0.25L of fluorine gas at STP with excess iodine is 0.1 L

The balanced chemical equation is given as:

I₂(g)   +   5F₂(g)    ------>     2IF₂(g)

1mole       5 mole                2 mole

1 L             5 L                      2 L

here , 1 L of I₂ react with 5 L of F₂ to form 2L IF₂

so, 0.25 L  react with = 0.25 / 5 = 0.05 L F₂

therefore, iodine pentafluoride gas IF₂ formed = 0.05 × 2 L

                                                                              = 0.1 L

Thus, Iodine pentafluoride gas is formed. Liters of iodine pentafluoride can be formed at STP from the reaction of 0.25L of fluorine gas at STP with excess iodine is 0.1 L.

To know more about iodine pentafluoride here

https://brainly.com/question/16867213

#SPJ1

According to the given statement The empirical formula of the oxide is YO3.

Chemical formulae for compounds that simply specify the proportions of the elements they include rather than the exact number or arrangement of atoms are known as empirical formulas. The component in the compound with the lowest whole lot would be this one.

By: Calculating the number of moles of each element from its mass, empirical formulas are generated using empirically measured element masses. Obtaining subscripts for a possible empirical formula by dividing the molar amount of each element by its smallest molar amount.

Since volume is represented as moles

Y 0

1 1.5

Y+1.5O2 = YO3.

YO3 - the empirical formula.

To know more about Empirical formula visit:

https://brainly.com/question/14044066

#SPJ9

In given ionic compound, Mg(ClO4)2 anion is ClO4⁻, NH4NO³ anion is (NO3)⁻, Cu(CH3CO2)² anion is [CH3COO]⁻, K2SO³ anion is SO3²⁻.

Positively charged ions are known as cations. Ions with negative charges are referred to as anions. A charged molecule or an atom is an ion. A balanced atom will change into a positively charged cation if one or more of its electrons are lost.

When non-metals gain electrons, they are created. They don't lose any protons and gain one or more electrons. They get a negative net charge as a result. The anions iodide (I-), chloride (Cl-), and hydroxide are some examples (OH–).

Anion exchange device applications. They lower the levels of nitrate, arsenic, and sulfate in water. Point-of-use units only filter harmful chemicals out of drinking and cooking water and are connected to a single tap.

To know more about ionic compound :

https://brainly.com/question/9167977

SPJ10

Answer: 1.27 mol Sulfur

Explanation: For every element, one mole of it contains 6.02x10^22 atoms (Avogradro's Number). So you just divide the original amount by Avogadro's Number to get 1.27 moles.

The  frequency of light is the ratio of speed to the wavelength. Then, the frequency of range light with the wavelength of 605 nm is 4.95 × 10¹⁴ Hz.

Frequency of light refers to the number of waves of electromagnetic radiation (such as light) that pass a given point per second. It is typically measured in Hertz (Hz), which represents the number of cycles per second.

The frequency of light determines its color and is directly related to its energy. Light with higher frequency has more energy and shorter wavelengths, while light with lower frequency has less energy and longer wavelengths.

Speed of light = 3 × 10⁸ m/s

wavelength = 605 nm = 605 × 10⁻⁹ m.

then frequency =  3 × 10⁸ m/s / 3 × 10⁸ m/s = 4.95 × 10¹⁴ Hz

Therefore, the frequency of the orange light is 4.95 × 10¹⁴ Hz.

Find more on frequency:

https://brainly.com/question/20386238

#SPJ2

The characteristic of group 14 elements is that they have four valence electrons in their outermost shell.

This is referred to as a substance which can't be broken down into simpler substances through as chemical reaction and examples include hydrogen, calcium etc.

These elements are arranged into different groups and periods on a periodic table according to their similarities. For example group 14 elements have four valence electrons which they need to complete in other to achieve a stable configuration.

Example of group 14 elements are carbon,silicon, tin etc which form covalent bonds with other elements in a reaction so as to ensure that that both become stable and is therefore the reason why it was chosen as the most appropriate choice.

Read more about Group 14 elements here https://brainly.com/question/859518

#SPJ1

In a proton-proton chain, four hydrogen nuclei (protons) are combined to form one helium nucleus; 0.7 percent of the original mass is lost mainly by conversion into heat energy, but some energy escapes in the form of neutrinos (ν).

Explanation:

Ionization energy is the minimum energy required to remove an electron from an isolated atom in the gaseous state, that is, in its ground state.

At the periodic table, we can see that there is a pattern for the first ionization energy.

It increases from bottom to top in a group, and from left to right in a period.

So:

Argon and Helium are on the far right of the periodic table, while sodium and potassium are on the far left.

So Argon and Helium have the highest ionization energy in comparison to Potassium and Sodium.

Between Argon and Helium, Helium is above argon in the periodic table, this means that helium has the highest ionization energy.

Answer: Helium

I believe the answer is B, neutrons

The balanced net ionic equation for the reaction is given below:

Pb²⁺ (aq) + S²⁻ (aq) → PbS (s)

Ionic equations are equations that show the ionic species involved i a reaction.

The ionic species in the reaction may undergo reduction or oxidation.

Therefore, ionic equations are usually redox reactions.

In balancing ionic equations, the atoms and the electrons involved in the reaction are balanced on both sides.

Considering the given ionic equation:

Pb²⁺ (aq) + S²⁻ (aq) → PbS (s)

The given equation above is a balanced net ionic equation both in electron transfer as well as in the number of atoms.

Learn more about ionic equations at: https://brainly.com/question/13879496

#SPJ1

Mass of dichloromethane is  324.9g

We can define mass as the measure of the amount of matter in a body

Here given reaction is

CH₄ + CCl₄ → 2CH₂Cl₂

So the limiting reactant is the reactant that produced the leadt amount of product and the molar mass of methane is 16.042g/mol and the number of mole of methane is

n = 30.7/16.042

n = 1.913 mol

And the amount of dichloromethane that can be produced is

n = 1.913 mol ×2/1 = 3.826 mol

So, molar mass of dichloromethane is 84.9325

3.826 mol × 84.9325 = 324.9g

So, mass of dichloromethane is  324.9g

Know more about mass

https://brainly.com/question/20721363

#SPJ1

The reaction that is chemically balanced and shows complete combustion is [tex]C_3 H_8 + 5 O_2 -- > 3 CO_2 + 4 H_2 O[/tex], Option B.

A balanced equation is an equation that obeys the law of conservation of atoms.

According to this law, atoms cannot be created and cannot be destroyed during the course of chemical reactions. The atoms can, however, be converted into different forms.

Thus, a balanced equation must have an equal number of participating atoms on both the reactant and product sides of the equation.

Also, a complete combustion reaction must produce carbon dioxide and water. Not carbon monoxide.

Therefore, the equation that fulfills the two conditions is[tex]C_3 H_8 + 5 O_2 -- > 3 CO_2 + 4 H_2 O[/tex]

More on balanced equations can be found here: https://brainly.com/question/7181548

#SPJ1

Answer:

C

Explanation:

I got it right

The correct answer is gold block has the maximum density.

What is the relation between Mass, Volume and Density?
Three of an object's most fundamental characteristics are mass, volume, and density. Volume indicates how large something is, mass indicates how heavy it is, and density is determined by dividing mass by volume. Although you frequently deal with the concepts of mass and volume, the concept of density is less clear-cut and requires careful consideration. Density is useful, though, once you get the hang of it.

Density = mass / volume
So as per given data as the volume is same for all material then we can consider only mass and density
Given, Volume remains constant
So, as mass and density are Directly proportional, it means whose mass is larger than its density will be larger or denser.

From given data Gold has larger mass then its density is larger.

Hence, Gold block has the maximum density

To learn more about density, mass and volume.

https://brainly.com/question/952755

#SPJ10

2509 in 3 significant figures is 2510.

Significant figures is a digit that is meaningful with respect to the precision of a measurement.

Significant figures are the number of digits in a value, often a measurement, that contribute to the degree of accuracy of the value.

We can identify the number of significant digits by counting all the values starting from the 1st non-zero digit located on the left. For example, 12.45 has four significant digits.

According to this question, 2509 contains 4 significant figures.

2509 is rounded to significant figures as follows:

To count the number of sig figs in 2509, count all 4 digits since it has no insignificant digits.

Learn more about significant figures at: https://brainly.com/question/17396594

#SPJ1

The balanced equation is:

Zn + 2HCl ---> ZnCl2 + H2

Answer:Ca(No3)2

Explanation:

Answer:

A. Ar+2

B. 18

C. 0

Explanation:

There are total of 2 + 2 + 6 + 2 + 4 = 16 electrons

since the cation is +2, it's neutral state should be 16 + 2 = 18

A. The ion is Ar+2

B. 18

C. Since 3p => 4s => 3d, there is no 3d

The  observation of this process that  provides evidence of a chemical reaction is "The liquid solution changed color" Option B

This is further explained below.

Generally, A chemical reaction is a process in which one or more compounds, referred to as the reactants, are changed into one or more new substances, referred to as the products.

Either the chemical components or the chemical compounds make up a substance.

During a chemical reaction, the individual atoms that make up the reactants are rearranged, which results in the production of new substances.

Read more about chemical reaction

https://brainly.com/question/3461108

#SPJ1

CQ

A silver ring reacts with compounds containing sulfur in the air to form silver sulfide, a black substance that makes up the tarnish on the surface of silver objects. To remove that tarnish from the ring, students placed it in a pan lined with aluminum foil and added hot water. Baking soda was added to the hot water and stirred. Students made observations about the process. Which observation of this process provides evidence of a chemical reaction? *

A- Hot water heated the aluminum foil

B- The liquid solution changed color

C- The pan was lined with aluminum foil

D- The hot water cooled

Answer:

look that might be answer

Explanation:

If you have 8.51x10-3 g of O₂, and excess ZnS, moles of ZnO form is 0.174×10⁻³ moles.

The balanced equation is given as :

2ZnS  +   3O₂    ------>   2ZnO  +  2SO₂

number of moles of O₂ = mass / molar mass

                                       = 8.51 × 10⁻³ g / 31.998 g/mol

                                       = 0.265× 10⁻³ moles

now, 3 moles of O₂ form 2 moles of ZnO

0.265× 10⁻³ moles of O₂  form( 2/3) ×  0.265× 10⁻³ = 0.174×10⁻³ moles

The number of moles of ZnO is 0.174×10⁻³ moles

Thus, If you have 8.51x10-3 g of O₂, and excess ZnS, moles of ZnO form is 0.174×10⁻³ moles.

To learn more about no. of moles here

https://brainly.com/question/26416088

#SPJ1

INFORMATION:

We know that:

- the diagram represents a chemical cell at 298 K

And we must determine how is the flow of electrons when the switch is closed

STEP BY STEP EXPLANATION:

To determine it, we need to know that the flow of electron will be from the particles undergo oxidation to particles undergo reduction.

Analyzing the equation, we can see that Al particles undergo oxidation and Ni particles undergo reduction

Then, electrons will flow from Al(s) to Ni(s)

ANSWER:

(3) Al(s) to Ni(s)